The 'num_asic_chans' that support interrupts in the interrupt subdevice is
always initialized to '24'. Remove this unneeded information from the subdevice
private data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The first 'asic_chan' that supports interrupts in the interrupt subdevice is
always initialized to '0'. Remove this unneeded information from the subdevice
private data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The 'first_chan' that supports interrupts in the interrupt subdevice is always
initialized to '0'. Remove this unneeded information from the subdevice private
data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This member of the subdevice private data is always initialized to '0' by
the only subdevice that uses it. Since we only have one asic on the board
it's really not needed. Just remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is only one asic on the board so the for () loop in the interrupt
handler to check multiple asics is not needed.

The sanity check of the 'irq' in the interrupt handler is also not needed.
If it _is_ wrong we have bigger problems in the kernel.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The board supported by this driver only has one asic that provides the
two digital i/o subdevices. The first dio subdevice has 24 channels that
support interrupts. The second dio subdevice also has 24 channels but no
interrupt support.

To make the code clearer and easier to maintain, remove the for () loop
that initialized these subdevices.

Also, correctly initialize the interrupt subdevice. The current code does
not set the SDF_CMD_READ subdev_flag and does not set the dev->read_subdev
pointer in the comedi_device.

Use the dev->read_subdev pointer in the interrupt handler to get the
interrupt subdevice and private data pointer instead of searching for
them. To keep this patch reviewable, the extra indents in interrupt_pcmmio()
will be removed later.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This function is only called by the interrupt subdevice so the sanity
check of the 'asic' is not necessary. Remove it.

The 'nports' is always 3 and the 'firstport' is always 0. Remove the
for () loop that clears the registers to disable the interrupts and
just use the pcmmio_dio_write() helper to write to the three page
registers.

This also fixes a bug where the write to the page registers is not
protected with the spinlock.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This member of the subdevice private data is not longer used. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Currently this function uses the subdevice private data to get the
iobase address needed to update the dio output channel state and
read the current state of the input channels. This subdevice private
data is in the process of being removed.

Use the subdevice 'index' to determine the base 'port' needed to
access the correct digital i/o registers. The pcmmio_dio_write()
function can then be used to update the outputs.

Introduce a new helper function, pcmmio_dio_read(), to read the
current state of the input channels.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Currently this function uses the subdevice private data to get the
iobase address needed to update the channel configuration. This
subdevice private data is in the process of being removed.

Use the subdevice 'index' to determine the base 'port' needed to
access the correct digital i/o registers. The pcmmio_dio_write()
function can then be used to update the configuration.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The paged registers in the asic need to be spinlock protected to
ensure that the page is not changed while writing to the registers.

Introduce a helper function to make sure the spinlock is used.

Use the new helper in pcmmio_reset(). This is one of the places where
the spinlock is not used.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This spinlock_t is meant to protect the page registers in the asic.
Rename it to make this clear.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This macro relies on a local variable having a specific name. Remove
the macro and add a local variable where used.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Redefine the registers used to access the digital i/o so that they
are based on the dev->iobase of the board instead of the 'asic_iobase'
that is stored in the private data.

Remove the then unused 'asic_iobase'.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename this function so it has namespace associated with the driver.

The board supported by this driver only has one WinSystems WS16C48 asic
on it that handles the digital i/o. Remove the unnecessary for () loop
that would reset multiple asics.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The board supported by this driver only has one WinSystems WS16C48 asic
on it that handles the digital i/o.

Remove the unnecessary 'asic' parameter that is passed to switch_page().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The board supported by this driver only has one WinSystems WS16C48 asic
on it that handles the digital i/o.

Remove the 'asics' struct array in the private data and add members for
the single 'asic_iobase' and the spinlock used by the asic.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The 'pol' and 'enab' members in the private data are never used. The
'num' member is set during the attach but never used. Remove them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The for () loop that does the request_irq() in this driver is a bit of
an overkill. The code appears to have been copied from the pcmuio driver
which supports boards with 1 or 2 ASIC devices. The board supported by
this driver only has 1 ASIC.

Simplify the code and store the irq number in the comedi_device. This
allows the core to automatically do the free_irq() when the driver is
detached.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add some whitespace to the analog output subdevice init and reorder the
init to follow the "norm" in comedi drivers.

Remove the init of len_chanlist. This member is only used for subdevices
the support async commands. The core will default the value correctly.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename this function so it has namespace associated with the driver.

Move the 'chan' local variable out of the for () loop. The 'chan' is
constant for the comedi_insn and only needs to be fetched once from
the insn->chanspec.

Also, remove the sanity check of the chan. The comedi core will ensure
that the chan is valid for the subdevice before calling this function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename wait_dac_ready() so it has namespace associated with the
driver.

Fix the function so it returns an errno if the conversion times
out. Propogate this errno if it happens.

Define the analog output status register to remove the magic numbers.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename this function to have namespace associated with the driver.

Refactor the function to remove the extra write to the command register
to set the range before writing the DAC value. Since the range is constant
for the entire comedi_insn it only needs to be set once. All writes to the
DAC after that will use the same range.

Define the register map for the analog output registers.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The 'iobase' is only used to pass the iobase address of the analog output
registers to ao_winsn(). This address is simply dev->iobase + 8.

Use that instead and remove the 'iobase' from the subdevice private data.
This removes a couple more uses of the ugly 'subpriv' macro.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is only one ai subdevice in this driver so there is no reason
to hold the last sample written to each channel in the subdevice
private data. Move the data into the device private data,

This gets some of the data out of the subdevice private data union
and removes some of the uses of the ugly 'subpriv' macro.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add some whitespace to the ai subdevice init and reorder it a bit
to follow the "norm" in comedi drivers.

Remove the init of s->len_chanlist. This member is only used with
subdevices that support async commands. The core will default the
value correctly..

The ai subdevice only uses the s->private member to pass the iobase
to the analog input registers. It's just a copy of the dev->iobase,
use that instead.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There are two ADC devices on this board. The first one handles ai
channels 0-7 and the second one channels 8-15.

Define the offset that is added to the iobase to access the 2nd
ADC device.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename adc_wait_ready() so it has namespace associated with the
driver.

Fix the function so it returns an errno if the conversion times
out. Propogate this errno if it happens.

Define the analog input status register to remove the magic numbers.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename this function to have namespace associated with the driver.

Refactor the function to remove the extra write to the command register
between each ADC conversion. We only need to do one dummy conversion in
order to flush the serial ADC. After that each command will return the
result of the previous conversion.

Define the register map for the analog input registers.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the comedi_range_is_bipolar() and comedi_offset_munge() helpers to
munge the bipolar analog input data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the BIP_RANGE and UNI_RANGE macros where appropriate instead of
the more generic RANGE macro.

Rename the range tables so they have namespace associated with the
driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

All the I/O ports are left unlocked in the driver so the 'pagelock'
in the private data is not necessary. The paranoia sanity checks
are also unnecessary, Remove them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

These functions are #ifdef'ed out and not needed in the driver.
Just remove them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

restructured the levels of indentation to follow the linux
kernel coding style thus fixing checkpatch errors and warnings
respectfully.
Signed-off-by: Gary Alan Rookard <garyrookard@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixed WARNING: space prohibited before semicolon
found by checkpatch.pl in gdm_qos.c
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes an unnecessary return statement parantheses error
found in ms.c by the checkpatch.pl tool.
Signed-off-by: Preetam D'Souza <preetamjdsouza@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixed "WARNING: space prohibited before semicoloni"
found by checkpatch.pl within dgrp_tty.c
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix to return negative error code -EIO from the error handling
case instead of 0.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Reviewed-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Correct spelling typo in lustre/lustre/libcfs
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Correct spelling typo in luster/lustre/fld and ldlm.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>