- 10 Apr, 2023 12 commits
-
-
Ian Rogers authored
Done as a warning as I'm not fully confident of the test's robustness of comparing the macro definition of __BYTE_ORDER__. v2. Is a rebase following patch 1 being merged. Signed-off-by:
Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andrii Nakryiko <andrii@kernel.org> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20230410160905.3052640-1-irogers@google.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Ian Rogers authored
The definitions are in util.c so move the declarations to match. Signed-off-by:
-
Ian Rogers authored
'input_name' is the name of the input perf.data file, it is used by data convert and ui code. Move it to util to make it more consistent with other global state. Signed-off-by:
-
Ian Rogers authored
Remove additional version_verbose flag by using the existing verbose variable. Signed-off-by:
-
Ian Rogers authored
Move to match the definition in header.c. Signed-off-by:
-
Ian Rogers authored
The usage function is part of util.h, move the usage strings there too. Signed-off-by:
-
Ian Rogers authored
Move under tools/perf/ui rather than in perf.c. Signed-off-by:
-
Ian Rogers authored
Write the JSON output to a file, then sanity check this output. This avoids problems with debug/warning/error output corrupting the file format. Signed-off-by:
-
Ian Rogers authored
JSON files don't support comments. Disable the "started on" comment when writing json output to file. Signed-off-by:
-
Ian Rogers authored
Write the CSV output to a file, then sanity check this output. This avoids problems with debug/warning/error output corrupting the file format. Signed-off-by:
-
Ian Rogers authored
The 'mem_hops' bits were added in 5.16 with no prior equivalent. Signed-off-by:
Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: bpf@vger.kernel.org Link: https://lore.kernel.org/r/20230408055208.1283832-1-irogers@google.comSigned-off-by:
-
Ian Rogers authored
'struct rq's member '__lock' was renamed from 'lock' in 5.14. Signed-off-by:
-
- 07 Apr, 2023 25 commits
-
-
Ian Rogers authored
When a pointer to a map exists do a get, when that pointer is overwritten or freed, put the map. This avoids issues with gets and puts being inconsistently used causing, use after puts, etc. For example, the map in struct addr_location is changed to hold a reference count. Reference count checking and address sanitizer were used to identify issues. Signed-off-by:
-
Ian Rogers authored
To make it clearer about the ownership of a reference count split the by-name case from the regular start-address sorted tree. Put the reference count when maps_by_name is freed, which requires moving a decrement to nr_maps in maps__remove. Add two missing map puts in maps__fixup_overlappings in the event maps__insert fails. Signed-off-by:
-
Ian Rogers authored
Dump the resultant and comparison maps on failure. Signed-off-by:
-
Ian Rogers authored
Later changes will add reference count checking for 'struct map'. Add accessors so that the reference count check is only necessary in one place. Signed-off-by:
-
Ian Rogers authored
Later changes will add reference count checking for 'struct map'. Add an accessor so that the reference count check is only necessary in one place. Signed-off-by:
-
Ian Rogers authored
Later changes will add reference count checking for struct map, add a helper function to invoke the map_ip and unmap_ip function pointers. The helper allows the reference count check to be in fewer places. Committer notes: Add missing conversions to: tools/perf/util/map.c tools/perf/util/cs-etm.c tools/perf/util/annotate.c tools/perf/arch/powerpc/util/sym-handling.c tools/perf/arch/s390/annotate/instructions.c Signed-off-by:
-
Ian Rogers authored
Add dso to match comment. This avoids a naming conflict with later added accessor functions for variables in struct map. Signed-off-by:
-
Ian Rogers authored
Fix the topic, PMU name, event code and umask. These updates were generated by: https://github.com/intel/perfmon/blob/main/scripts/create_perf_json.py with this PR: https://github.com/intel/perfmon/pull/66Signed-off-by:
-
Ian Rogers authored
Fix the PMU names, event code and umask. Remove UNC_IIO_BANDWIDTH_OUT events that aren't supported. These updates were generated by: https://github.com/intel/perfmon/blob/main/scripts/create_perf_json.py with this PR: https://github.com/intel/perfmon/pull/66Signed-off-by:
-
Ian Rogers authored
Correct the memory topic of events for the imc related PMUs. These updates were generated by: https://github.com/intel/perfmon/blob/main/scripts/create_perf_json.py with this PR: https://github.com/intel/perfmon/pull/66Signed-off-by:
-
Ian Rogers authored
Fix the PMU names, event code and umask. Remove UNC_IIO_BANDWIDTH_OUT events that aren't supported. These updates were generated by: https://github.com/intel/perfmon/blob/main/scripts/create_perf_json.py with this PR: https://github.com/intel/perfmon/pull/66Signed-off-by:
-
Ian Rogers authored
Fix the PMU name, event code and umask. These updates were generated by: https://github.com/intel/perfmon/blob/main/scripts/create_perf_json.py with this PR: https://github.com/intel/perfmon/pull/66Signed-off-by:
-
Ian Rogers authored
We may have a lot of copies of a particular uncore PMU, such as uncore_cha_0 to uncore_cha_59 on Intel sapphirerapids. The JSON events may match each of PMUs and so the events are copied to it. In 'perf list' this means we see the same JSON event 60 times as events on different PMUs don't have duplicates removed. There are 284 uncore_cha events on sapphirerapids. Rather than use the PMU's name to sort and remove duplicates, use the JSON PMU name. This reduces the 60 copies back down to 1 and has the side effect of speeding things like the "perf all PMU test" shell test. Signed-off-by:
-
Ian Rogers authored
Improve documentation around perf_pmu_alias pmu_name and on functions. Reduce the scope of pmu_uncore_alias_match to just file. Rename perf_pmu__valid_suffix to the more revealing perf_pmu__match_ignoring_suffix. Add a short-cut to perf_pmu__match_ignoring_suffix for PMU names that don't also have a socket value, and can therefore avoid a memory allocation. Signed-off-by:
-
Ian Rogers authored
struct pmu_event has const char*s, only unit needs to be non-const for the sake of passing as an out argument to strtod(). Reduce the const casts from 4 down to 1. Signed-off-by:
-
Namhyung Kim authored
It doesn't delete data in the task_data and lock_stat maps. The data is kept there until it's consumed by userspace at the end. But it calls bpf_map_update_elem() again and again, and the data will be discarded if the map is full. This is not good. Worse, in the bpf_map_update_elem(), it keeps trying to get a new node even if the map was full. I guess it makes sense if it deletes some node like in the tstamp map (that's why I didn't make the change there). In a pre-allocated hash map, that means it'd iterate all CPU to check the freelist. And it has a bad performance impact on large machines. I've checked it on my 64 CPU machine with this. $ perf bench sched messaging -g 1000 # Running 'sched/messaging' benchmark: # 20 sender and receiver processes per group # 1000 groups == 40000 processes run Total time: 2.825 [sec] And I used the task mode, so that it can guarantee the map is full. The default map entry size is 16K and this workload has 40K tasks. Before: $ sudo ./perf lock con -abt -E3 -- perf bench sched messaging -g 1000 # Running 'sched/messaging' benchmark: # 20 sender and receiver processes per group # 1000 groups == 40000 processes run Total time: 11.299 [sec] contended total wait max wait avg wait pid comm 19284 3.51 s 3.70 ms 181.91 us 1305863 sched-messaging 243 84.09 ms 466.67 us 346.04 us 1336608 sched-messaging 177 66.35 ms 12.08 ms 374.88 us 1220416 node For some reason, it didn't report the data failures. But you can see the total time in the workload is increased a lot (2.8 -> 11.3). If it fails early when the map is full, it goes back to normal. After: $ sudo ./perf lock con -abt -E3 -- perf bench sched messaging -g 1000 # Running 'sched/messaging' benchmark: # 20 sender and receiver processes per group # 1000 groups == 40000 processes run Total time: 3.044 [sec] contended total wait max wait avg wait pid comm 18743 591.92 ms 442.96 us 31.58 us 1431454 sched-messaging 51 210.64 ms 207.45 ms 4.13 ms 1468724 sched-messaging 81 68.61 ms 65.79 ms 847.07 us 1463183 sched-messaging === output for debug === bad: 1164137, total: 2253341 bad rate: 51.66 % histogram of failure reasons task: 0 stack: 0 time: 0 data: 1164137 Signed-off-by: -
Namhyung Kim authored
It needs callstacks for two reasons: * for stack aggregation mode, the map key is the stack id and it can also show the full stack traces when -v is used * for other aggregation modes, the stack filter can be used to limit lock contentions from known call paths The -v option is meaningful (in terms of stack trace) only for stack aggregation mode, so it should not set the save_callstack for other mode like with -t or -l options. I've noticed this with the following command line: $ sudo ./perf lock con -ablv -E 3 -M 16 -- ./perf bench sched messaging ... contended total wait max wait avg wait address symbol 88 4.59 ms 108.07 us 52.13 us ffff935757f46ec0 (spinlock) 33 905.22 us 73.67 us 27.43 us ffff935757f41700 (spinlock) 28 703.69 us 79.28 us 25.13 us ffff938a3d9b0c80 rq_lock (spinlock) === output for debug === bad: 12272, total: 12421 bad rate: 98.80 % histogram of failure reasons task: 8285 stack: 3987 <---------- here time: 0 data: 0 It should not have any failure on stacks since it doesn't use it. No functional change intended. Signed-off-by: -
Namhyung Kim authored
When -E option is used, it only prints the given number of entries but the event stat at the end should have the numbers for entire entries. Likewise, -S option will hide entries that don't have the named function in the callstack. Also update event stat for them. Signed-off-by:
-
Namhyung Kim authored
It's possible to fail to update the data when the lock_stat map is full. We should check that case and show the number at the end. $ sudo ./perf lock con -ablv -E3 -- ./perf bench sched messaging ... contended total wait max wait avg wait address symbol 6157 208.48 ms 69.29 us 33.86 us ffff934c001c1f00 (spinlock) 4030 72.04 ms 61.84 us 17.88 us ffff934c000415c0 (spinlock) 3201 50.30 ms 47.73 us 15.71 us ffff934c2eead850 (spinlock) === output for debug === bad: 0, total: 13388 bad rate: 0.00 % histogram of failure reasons task: 0 stack: 0 time: 0 data: 0 <----- added Signed-off-by: -
Namhyung Kim authored
The BPF hash map will align the map size to a power of 2. So 10k would be 16k anyway. Let's have the actual size to avoid confusions. Signed-off-by:
-
Namhyung Kim authored
Users often want to change the map size, let's add a short option (-M) for that. Signed-off-by:
-
Namhyung Kim authored
The get_type_flag() should check both str and name fields in the lock_type_table so that it can find the appropriate flag without retrying with ':R' or ':W' suffix from the caller. Also fix a typo in the rt-mutex. Signed-off-by:
-
Liam Howlett authored
Rename the fallthrough attribute to better align with the kernel version. Copy the definition from include/linux/compiler_attributes.h including the #else clause. Adding the #else clause allows the tools compiler.h header to drop the check for a definition entirely and keeps both definitions together. Change any __fallthrough statements to fallthrough anywhere it was used within perf. This allows other tools to use the same key word as the kernel. Committer notes: Did some missing conversions to: builtin-list.c Also included gtk.h before the 'fallthrough' definition in: tools/perf/ui/gtk/hists.c tools/perf/ui/gtk/helpline.c tools/perf/ui/gtk/browser.c As it is the arg name for a macro in glib.h: /var/home/acme/git/perf-tools-next/tools/include/linux/compiler-gcc.h:16:55: error: missing binary operator before token "(" 16 | # define fallthrough __attribute__((__fallthrough__)) | ^ /usr/include/glib-2.0/glib/gmacros.h:637:28: note: in expansion of macro ‘fallthrough’ 637 | #if g_macro__has_attribute(fallthrough) Reviewed-by:Miguel Ojeda <ojeda@kernel.org> Signed-off-by:
Liam Howlett <Liam.Howlett@oracle.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Miguel Ojeda <ojeda@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Tom Rix <trix@redhat.com> Cc: linux-sparse@vger.kernel.org <linux-sparse@vger.kernel.org> Cc: llvm@lists.linux.dev <llvm@lists.linux.dev> Link: https://lore.kernel.org/r/20221125154947.2163498-1-Liam.Howlett@oracle.comSigned-off-by:
-
Ian Rogers authored
Ensure fd is closed on error paths. Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Acked-by:
-
Ian Rogers authored
By default bison uses global state for compatibility with yacc. Make the parser reentrant so that it may be used in asynchronous and multithreaded situations. Signed-off-by:
-
- 04 Apr, 2023 3 commits
-
-
Ian Rogers authored
Later changes will add reference count checking for struct map, start and end are frequently accessed variables. Add an accessor so that the reference count check is only necessary in one place. Signed-off-by:
-
Ian Rogers authored
Later changes will add reference count checking for struct map, with dso being the most frequently accessed variable. Add an accessor so that the reference count check is only necessary in one place. Additional changes: - add a dso variable to avoid repeated map__dso calls. - in builtin-mem.c dump_raw_samples, code only partially tested for dso == NULL. Make the possibility of NULL consistent. - in thread.c thread__memcpy fix use of spaces and use tabs. Committer notes: Did missing conversions on these files: tools/perf/arch/powerpc/util/skip-callchain-idx.c tools/perf/arch/powerpc/util/sym-handling.c tools/perf/ui/browsers/hists.c tools/perf/ui/gtk/annotate.c tools/perf/util/cs-etm.c tools/perf/util/thread.c tools/perf/util/unwind-libunwind-local.c tools/perf/util/unwind-libunwind.c Signed-off-by:
-
Ian Rogers authored
Introduce functions to access struct maps. These functions reduce the number of places reference counting is necessary. While tidying APIs do some small const-ification, in particlar to unwind_libunwind_ops. Committer notes: Fixed up tools/perf/util/unwind-libunwind.c: - return ops->get_entries(cb, arg, thread, data, max_stack); + return ops->get_entries(cb, arg, thread, data, max_stack, best_effort); Signed-off-by:
-
