commit 64cb9273 upstream.

Both ext3 and ext4 htree_dirblock_to_tree() is just filling the
in-core rbtree for use by call_filldir().  All updates of ->f_pos are
done by the latter; bumping it here (on error) is obviously wrong - we
might very well have it nowhere near the block we'd found an error in.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 6ca792ed upstream.

Subtracting the number of the first data block places the superblock
backups one block too early, corrupting the file system. When the block
size is larger than 1K, the first data block is 0, so the subtraction
has no effect and no corruption occurs.
Signed-off-by: Maarten ter Huurne <maarten@treewalker.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 39c04153 upstream.

Once we decrement transaction->t_updates, if this is the last handle
holding the transaction from closing, and once we release the
t_handle_lock spinlock, it's possible for the transaction to commit
and be released.  In practice with normal kernels, this probably won't
happen, since the commit happens in a separate kernel thread and it's
unlikely this could all happen within the space of a few CPU cycles.

On the other hand, with a real-time kernel, this could potentially
happen, so save the tid found in transaction->t_tid before we release
t_handle_lock.  It would require an insane configuration, such as one
where the jbd2 thread was set to a very high real-time priority,
perhaps because a high priority real-time thread is trying to read or
write to a file system.  But some people who use real-time kernels
have been known to do insane things, including controlling
laser-wielding industrial robots.  :-)
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit fe52d17c upstream.

Some of the functions which modify the jbd2 superblock were not
updating the checksum before calling jbd2_write_superblock().  Move
the call to jbd2_superblock_csum_set() to jbd2_write_superblock(), so
that the checksum is calculated consistently.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 10d0b903 upstream.

A typo causes routine rtl92cu_phy_rf6052_set_cck_txpower() to test the
same condition twice. The problem was found using cppcheck-1.49, and the
proper fix was verified against the pre-mac80211 version of the code.

This patch was originally included as commit 1288aa4e, but was accidentally
reverted in a later patch.

Reported-by: David Binderman <dcb314@hotmail.com> [original report]
Reported-by: Andrea Morello <andrea.merello@gmail.com> [report of accidental reversion]
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 73e088ed upstream.

The driver loads its firmware from files rtlwifi/rtl8723fw*.bin, but the
MODULE_FIRMWARE macros refer to rtlwifi/RTL8723aefw*.bin.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Reported-by: Axel Köllhofer <AxelKoellhofer@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c4d827c5 upstream.

This is a new device for this driver.
Reported-by: Tobias Kluge <zielscheibe@gmail.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Tobias Kluge <zielscheibe@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 689c3db4 upstream.

If we request reading or writing on a file that needs to be
reopened, it causes the deadlock: we are already holding rw
semaphore for reading and then we try to acquire it for writing
in cifs_relock_file. Fix this by acquiring the semaphore for
reading in cifs_relock_file due to we don't make any changes in
locks and don't need a write access.
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 6658b9f7 upstream.

Certain servers may not set the NumberOfLinks field in query file/path
info responses. In such a case, cifs_inode_needs_reval() assumes that
all regular files are hardlinks and triggers revalidation, leading to
excessive and unnecessary network traffic.

This change hardcodes cf_nlink (and subsequently i_nlink) when not
returned by the server, similar to what already occurs in cifs_mkdir().
Signed-off-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit fa460c2d upstream.

This reverts commit e4715f01.

mem_cgroup_put is hierarchy aware so mem_cgroup_put(memcg) already drops
an additional reference from all parents so the additional
mem_cgrroup_put(parent) potentially causes use-after-free.
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Li Zefan <lizefan@huawei.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Glauber Costa <glommer@openvz.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit f51e1eb6 upstream.

Toralf Förster reported that the cpufreq ondemand governor behaves erratically
(doesn't scale well) after a suspend/resume cycle. The problem was that the
cpufreq subsystem's idea of the cpu frequencies differed from the actual
frequencies set in the hardware after a suspend/resume cycle. Toralf bisected
the problem to commit a66b2e5 (cpufreq: Preserve sysfs files across
suspend/resume).

Among other (harmless) things, that commit skipped the call to
cpufreq_update_policy() in the resume path. But cpufreq_update_policy() plays
an important role during resume, because it is responsible for checking if
the BIOS changed the cpu frequencies behind our back and resynchronize the
cpufreq subsystem's knowledge of the cpu frequencies, and update them
accordingly.

So, restore the call to cpufreq_update_policy() in the resume path to fix
the cpufreq regression.
Reported-and-tested-by: Toralf Förster <toralf.foerster@gmx.de>
Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 2ee3e26c upstream.

Commit 39c60a09 '[SCSI] sd: fix array cache flushing bug causing
performance problems' added temp as a pointer to "temporary " and used
sizeof(temp) - 1 as its length.  But sizeof(temp) is the size of the
pointer, not the size of the string constant.  Change temp to a static
array so that sizeof() does what was intended.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 03617c18 upstream.

Some userspaces do not preserve unusable property. Since usable
segment has to be present according to VMX spec we can use present
property to amend userspace bug by making unusable segment always
nonpresent. vmx_segment_access_rights() already marks nonpresent segment
as unusable.
Reported-by: Stefan Pietsch <stefan.pietsch@lsexperts.de>
Tested-by: Stefan Pietsch <stefan.pietsch@lsexperts.de>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 24750082 upstream.

A freebsd NFSv4.0 client was getting rare IO errors expanding a tarball.
A network trace showed the server returning BAD_XDR on the final getattr
of a getattr+write+getattr compound.  The final getattr started on a
page boundary.

I believe the Linux client ignores errors on the post-write getattr, and
that that's why we haven't seen this before.
Reported-by: Rick Macklem <rmacklem@uoguelph.ca>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 62f288a0 upstream.

We need to ensure that we clear NFS4_SLOT_TBL_DRAINING on the back
channel when we're done recovering the session.

Regression introduced by commit 774d5f14 (NFSv4.1 Fix a pNFS session
draining deadlock)
Signed-off-by: Andy Adamson <andros@netapp.com>
[Trond: Changed order to start back-channel first. Minor code cleanup]
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "serial: 8250_pci: add support for another kind of NetMos Technology PCI 9835 Multi-I/O Controller"

commit 828c6a10 upstream.

This reverts commit 8d2f8cd4.

As reported by Stefan, this device already works with the parport_serial
driver, so the 8250_pci driver should not also try to grab it as well.
Reported-by: Stefan Seyfried <stefan.seyfried@googlemail.com>
Cc: Wang YanQing <udknight@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 64e377dc upstream.

Commit 19ffd68f
('pty: Remove redundant itty reset') introduced a regression
whereby the other pty's linkage is not cleared on teardown.
This triggers a false positive diagnostic in testing.

Properly reset the itty linkage.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 13d60f4b upstream.

The futex_keys of process shared futexes are generated from the page
offset, the mapping host and the mapping index of the futex user space
address. This should result in an unique identifier for each futex.

Though this is not true when futexes are located in different subpages
of an hugepage. The reason is, that the mapping index for all those
futexes evaluates to the index of the base page of the hugetlbfs
mapping. So a futex at offset 0 of the hugepage mapping and another
one at offset PAGE_SIZE of the same hugepage mapping have identical
futex_keys. This happens because the futex code blindly uses
page->index.

Steps to reproduce the bug:

1. Map a file from hugetlbfs. Initialize pthread_mutex1 at offset 0
   and pthread_mutex2 at offset PAGE_SIZE of the hugetlbfs
   mapping.

   The mutexes must be initialized as PTHREAD_PROCESS_SHARED because
   PTHREAD_PROCESS_PRIVATE mutexes are not affected by this issue as
   their keys solely depend on the user space address.

2. Lock mutex1 and mutex2

3. Create thread1 and in the thread function lock mutex1, which
   results in thread1 blocking on the locked mutex1.

4. Create thread2 and in the thread function lock mutex2, which
   results in thread2 blocking on the locked mutex2.

5. Unlock mutex2. Despite the fact that mutex2 got unlocked, thread2
   still blocks on mutex2 because the futex_key points to mutex1.

To solve this issue we need to take the normal page index of the page
which contains the futex into account, if the futex is in an hugetlbfs
mapping. In other words, we calculate the normal page mapping index of
the subpage in the hugetlbfs mapping.

Mappings which are not based on hugetlbfs are not affected and still
use page->index.

Thanks to Mel Gorman who provided a patch for adding proper evaluation
functions to the hugetlbfs code to avoid exposing hugetlbfs specific
details to the futex code.

[ tglx: Massaged changelog ]
Signed-off-by: Zhang Yi <zhang.yi20@zte.com.cn>
Reviewed-by: Jiang Biao <jiang.biao2@zte.com.cn>
Tested-by: Ma Chenggong <ma.chenggong@zte.com.cn>
Reviewed-by: 'Mel Gorman' <mgorman@suse.de>
Acked-by: 'Darren Hart' <dvhart@linux.intel.com>
Cc: 'Peter Zijlstra' <peterz@infradead.org>
Link: http://lkml.kernel.org/r/000101ce71a6%24a83c5880%24f8b50980%24@comSigned-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 7b175c46 upstream.

This hopefully will help point developers to the proper way that patches
should be submitted for inclusion in the stable kernel releases.
Reported-by: David Howells <dhowells@redhat.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 1c8fca1d upstream.

The template lookup interface does not provide a way to use format
strings, so make sure that the interface cannot be abused accidentally.
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ffc8b308 upstream.

Disk names may contain arbitrary strings, so they must not be
interpreted as format strings.  It seems that only md allows arbitrary
strings to be used for disk names, but this could allow for a local
memory corruption from uid 0 into ring 0.

CVE-2013-2851
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 3ebacb05 upstream.

The test if bitmap access is out of bound could errorneously pass if the
device size is divisible by 16384 sectors and we are asking for one bitmap
after the end.

Check for invalid size in the superblock. Invalid size could cause integer
overflows in the rest of the code.
Signed-off-by: Mikulas Patocka <mpatocka@artax.karlin.mff.cuni.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 3594f4c0 upstream.

The exposed interface for cm_notify_event() could result in the event msg
string being parsed as a format string. Make sure it is only used as a
literal string.
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Anton Vorontsov <cbou@mail.ru>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 8d8022e8 upstream.

v3.8-rc1-5-g1fb9341a was supposed to stop parallel kvm loads exhausting
percpu memory on large machines:

    Now we have a new state MODULE_STATE_UNFORMED, we can insert the
    module into the list (and thus guarantee its uniqueness) before we
    allocate the per-cpu region.

In my defence, it didn't actually say the patch did this.  Just that
we "can".

This patch actually *does* it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Tested-by: Jim Hull <jim.hull@hp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 542db015 upstream.

In drivers/cdrom/cdrom.c mmc_ioctl_cdrom_read_data() allocates a memory
area with kmalloc in line 2885.

  2885         cgc->buffer = kmalloc(blocksize, GFP_KERNEL);
  2886         if (cgc->buffer == NULL)
  2887                 return -ENOMEM;

In line 2908 we can find the copy_to_user function:

  2908         if (!ret && copy_to_user(arg, cgc->buffer, blocksize))

The cgc->buffer is never cleaned and initialized before this function.
If ret = 0 with the previous basic block, it's possible to display some
memory bytes in kernel space from userspace.

When we read a block from the disk it normally fills the ->buffer but if
the drive is malfunctioning there is a chance that it would only be
partially filled.  The result is an leak information to userspace.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jonathan Salwan <jonathan.salwan@gmail.com>
Cc: Luis Henriques <luis.henriques@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 8b8cf891 upstream.

__kernel_time_t is a long, which cannot hold a U32_MAX on 32-bit
architectures.  Just drop this check as it has limited value.

This fixes a crash like:

[  957.905812] kernel BUG at /srv/autobuild-ceph/gitbuilder.git/build/include/linux/ceph/decode.h:164!
[  957.914849] Internal error: Oops - BUG: 0 [#1] SMP ARM
[  957.919978] Modules linked in: rbd libceph libcrc32c ipmi_devintf ipmi_si ipmi_msghandler nfsd nfs_acl auth_rpcgss nfs fscache lockd sunrpc
[  957.932547] CPU: 1    Tainted: G        W     (3.9.0-ceph-19bb6a83-highbank #1)
[  957.939881] PC is at ceph_osdc_build_request+0x8c/0x4f8 [libceph]
[  957.945967] LR is at 0xec520904
[  957.949103] pc : [<bf13e76c>]    lr : [<ec520904>]    psr: 20000153
[  957.949103] sp : ec753df8  ip : 00000001  fp : ec53e100
[  957.960571] r10: ebef25c0  r9 : ec5fa400  r8 : ecbcc000
[  957.965788] r7 : 00000000  r6 : 00000000  r5 : ffffffff  r4 : 00000020
[  957.972307] r3 : 51cc8143  r2 : ec520900  r1 : ec753e58  r0 : ec520908
[  957.978827] Flags: nzCv  IRQs on  FIQs off  Mode SVC_32  ISA ARM  Segment user
[  957.986039] Control: 10c5387d  Table: 2c59c04a  DAC: 00000015
[  957.991777] Process rbd (pid: 2138, stack limit = 0xec752238)
[  957.997514] Stack: (0xec753df8 to 0xec754000)
[  958.001864] 3de0:                                                       00000001 00000001
[  958.010032] 3e00: 00000001 bf139744 ecbcc000 ec55a0a0 00000024 00000000 ebef25c0 fffffffe
[  958.018204] 3e20: ffffffff 00000000 00000000 00000001 ec5fa400 ebef25c0 ec53e100 bf166b68
[  958.026377] 3e40: 00000000 0000220f fffffffe ffffffff ec753e58 bf13ff24 51cc8143 05b25ed2
[  958.034548] 3e60: 00000001 00000000 00000000 bf1688d4 00000001 00000000 00000000 00000000
[  958.042720] 3e80: 00000001 00000060 ec5fa400 ed53d200 ed439600 ed439300 00000001 00000060
[  958.050888] 3ea0: ec5fa400 ed53d200 00000000 bf16a320 00000000 ec53e100 00000040 ec753eb8
[  958.059059] 3ec0: ec51df00 ed53d7c0 ed53d200 ed53d7c0 00000000 ed53d7c0 ec5fa400 bf16ed70
[  958.067230] 3ee0: 00000000 00000060 00000002 ed53d200 00000000 bf16acf4 ed53d7c0 ec752000
[  958.075402] 3f00: ed980e50 e954f5d8 00000000 00000060 ed53d240 ed53d258 ec753f80 c04f44a8
[  958.083574] 3f20: edb7910c ec664700 01ade920 c02e4c44 00000060 c016b3dc ec51de40 01adfb84
[  958.091745] 3f40: 00000060 ec752000 ec753f80 ec752000 00000060 c0108444 00000007 ec51de48
[  958.099914] 3f60: ed0eb8c0 00000000 00000000 ec51de40 01adfb84 00000001 00000060 c0108858
[  958.108085] 3f80: 00000000 00000000 51cc8143 00000060 01adfb84 00000007 00000004 c000dd68
[  958.116257] 3fa0: 00000000 c000dbc0 00000060 01adfb84 00000007 01adfb84 00000060 01adfb80
[  958.124429] 3fc0: 00000060 01adfb84 00000007 00000004 beded1a8 00000000 01adf2f0 01ade920
[  958.132599] 3fe0: 00000000 beded180 b6811324 b6811334 800f0010 00000007 2e7f5821 2e7f5c21
[  958.140815] [<bf13e76c>] (ceph_osdc_build_request+0x8c/0x4f8 [libceph]) from [<bf166b68>] (rbd_osd_req_format_write+0x50/0x7c [rbd])
[  958.152739] [<bf166b68>] (rbd_osd_req_format_write+0x50/0x7c [rbd]) from [<bf1688d4>] (rbd_dev_header_watch_sync+0xe0/0x204 [rbd])
[  958.164486] [<bf1688d4>] (rbd_dev_header_watch_sync+0xe0/0x204 [rbd]) from [<bf16a320>] (rbd_dev_image_probe+0x23c/0x850 [rbd])
[  958.175967] [<bf16a320>] (rbd_dev_image_probe+0x23c/0x850 [rbd]) from [<bf16acf4>] (rbd_add+0x3c0/0x918 [rbd])
[  958.185975] [<bf16acf4>] (rbd_add+0x3c0/0x918 [rbd]) from [<c02e4c44>] (bus_attr_store+0x20/0x2c)
[  958.194850] [<c02e4c44>] (bus_attr_store+0x20/0x2c) from [<c016b3dc>] (sysfs_write_file+0x168/0x198)
[  958.203984] [<c016b3dc>] (sysfs_write_file+0x168/0x198) from [<c0108444>] (vfs_write+0x9c/0x170)
[  958.212768] [<c0108444>] (vfs_write+0x9c/0x170) from [<c0108858>] (sys_write+0x3c/0x70)
[  958.220768] [<c0108858>] (sys_write+0x3c/0x70) from [<c000dbc0>] (ret_fast_syscall+0x0/0x30)
[  958.229199] Code: e59d1058 e5913000 e3530000 ba000114 (e7f001f2)
Signed-off-by: Josh Durgin <josh.durgin@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a1dc1937 upstream.

[ 1121.231883] BUG: sleeping function called from invalid context at kernel/rwsem.c:20
[ 1121.231935] in_atomic(): 1, irqs_disabled(): 0, pid: 9831, name: mv
[ 1121.231971] 1 lock held by mv/9831:
[ 1121.231973]  #0:  (&(&ci->i_ceph_lock)->rlock){+.+...},at:[<ffffffffa02bbd38>] ceph_getxattr+0x58/0x1d0 [ceph]
[ 1121.231998] CPU: 3 PID: 9831 Comm: mv Not tainted 3.10.0-rc6+ #215
[ 1121.232000] Hardware name: To Be Filled By O.E.M. To Be Filled By
O.E.M./To be filled by O.E.M., BIOS 080015  11/09/2011
[ 1121.232027]  ffff88006d355a80 ffff880092f69ce0 ffffffff8168348c ffff880092f69cf8
[ 1121.232045]  ffffffff81070435 ffff88006d355a20 ffff880092f69d20 ffffffff816899ba
[ 1121.232052]  0000000300000004 ffff8800b76911d0 ffff88006d355a20 ffff880092f69d68
[ 1121.232056] Call Trace:
[ 1121.232062]  [<ffffffff8168348c>] dump_stack+0x19/0x1b
[ 1121.232067]  [<ffffffff81070435>] __might_sleep+0xe5/0x110
[ 1121.232071]  [<ffffffff816899ba>] down_read+0x2a/0x98
[ 1121.232080]  [<ffffffffa02baf70>] ceph_vxattrcb_layout+0x60/0xf0 [ceph]
[ 1121.232088]  [<ffffffffa02bbd7f>] ceph_getxattr+0x9f/0x1d0 [ceph]
[ 1121.232093]  [<ffffffff81188d28>] vfs_getxattr+0xa8/0xd0
[ 1121.232097]  [<ffffffff8118900b>] getxattr+0xab/0x1c0
[ 1121.232100]  [<ffffffff811704f2>] ? final_putname+0x22/0x50
[ 1121.232104]  [<ffffffff81155f80>] ? kmem_cache_free+0xb0/0x260
[ 1121.232107]  [<ffffffff811704f2>] ? final_putname+0x22/0x50
[ 1121.232110]  [<ffffffff8109e63d>] ? trace_hardirqs_on+0xd/0x10
[ 1121.232114]  [<ffffffff816957a7>] ? sysret_check+0x1b/0x56
[ 1121.232120]  [<ffffffff81189c9c>] SyS_fgetxattr+0x6c/0xc0
[ 1121.232125]  [<ffffffff81695782>] system_call_fastpath+0x16/0x1b
[ 1121.232129] BUG: scheduling while atomic: mv/9831/0x10000002
[ 1121.232154] 1 lock held by mv/9831:
[ 1121.232156]  #0:  (&(&ci->i_ceph_lock)->rlock){+.+...}, at:
[<ffffffffa02bbd38>] ceph_getxattr+0x58/0x1d0 [ceph]

I think move the ci->i_ceph_lock down is safe because we can't free
ceph_inode_info at there.
Signed-off-by: Jianpeng Ma <majianpeng@gmail.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 2cb33cac upstream.

A malicious monitor can craft an auth reply message that could cause a
NULL function pointer dereference in the client's kernel.

To prevent this, the auth_none protocol handler needs an empty
ceph_auth_client_ops->build_request() function.

CVE-2013-1059
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Reported-by: Chanam Park <chanam.park@hkpco.kr>
Reviewed-by: Seth Arnold <seth.arnold@canonical.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull another powerpc fix from Benjamin Herrenschmidt:
 "I mentioned that while we had fixed the kernel crashes, EEH error
  recovery didn't always recover...  It appears that I had a fix for
  that already in powerpc-next (with a stable CC).

  I cherry-picked it today and did a few tests and it seems that things
  now work quite well.  The patch is also pretty simple, so I see no
  reason to wait before merging it."

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc/eeh: Fix fetching bus for single-dev-PE

Pull SCSI fixes from James Bottomley:
 "This is a set of seven bug fixes.  Several fcoe fixes for locking
  problems, initiator issues and a VLAN API change, all of which could
  eventually lead to data corruption, one fix for a qla2xxx locking
  problem which could lead to multiple completions of the same request
  (and subsequent data corruption) and a use after free in the ipr
  driver.  Plus one minor MAINTAINERS file update"

(only six bugfixes in this pull, since I had already pulled the fcoe API
fix directly from Robert Love)

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  [SCSI] ipr: Avoid target_destroy accessing memory after it was freed
  [SCSI] qla2xxx: Fix for locking issue between driver ISR and mailbox routines
  MAINTAINERS: Fix fcoe mailing list
  libfc: extend ex_lock to protect all of fc_seq_send
  libfc: Correct check for initiator role
  libfcoe: Fix Conflicting FCFs issue in the fabric

While running Linux as guest on top of phyp, we possiblly have
PE that includes single PCI device. However, we didn't return
its PCI bus correctly and it leads to failure on recovery from
EEH errors for single-dev-PE. The patch fixes the issue.

Cc: <stable@vger.kernel.org> # v3.7+
Cc: Steve Best <sbest@us.ibm.com>
Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Pull powerpc fixes from Ben Herrenschmidt:
 "We discovered some breakage in our "EEH" (PCI Error Handling) code
  while doing error injection, due to a couple of regressions.  One of
  them is due to a patch (37f02195 "powerpc/pci: fix PCI-e devices
  rescan issue on powerpc platform") that, in hindsight, I shouldn't
  have merged considering that it caused more problems than it solved.

  Please pull those two fixes.  One for a simple EEH address cache
  initialization issue.  The other one is a patch from Guenter that I
  had originally planned to put in 3.11 but which happens to also fix
  that other regression (a kernel oops during EEH error handling and
  possibly hotplug).

  With those two, the couple of test machines I've hammered with error
  injection are remaining up now.  EEH appears to still fail to recover
  on some devices, so there is another problem that Gavin is looking
  into but at least it's no longer crashing the kernel."

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc/pci: Improve device hotplug initialization
  powerpc/eeh: Add eeh_dev to the cache during boot

Due to recent changes and expecations of proper cpu bindings, there are
now cases for many of the in-tree devicetrees where a WARN() will hit
on boot due to badly formatted /cpus nodes.

Downgrade this to a pr_warn() to be less alarmist, since it's not a
new problem.

Tested on Arndale, Cubox, Seaboard and Panda ES. Panda hits the WARN
without this, the others do not.
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 37f02195 (powerpc/pci: fix PCI-e devices rescan issue on powerpc
platform) fixes a problem with interrupt and DMA initialization on hot
plugged devices. With this commit, interrupt and DMA initialization for
hot plugged devices is handled in the pci device enable function.

This approach has a couple of drawbacks. First, it creates two code paths
for device initialization, one for hot plugged devices and another for devices
known during the initial PCI scan. Second, the initialization code for hot
plugged devices is only called when the device is enabled, ie typically
in the probe function. Also, the platform specific setup code is called each
time pci_enable_device() is called, not only once during device discovery,
meaning it is actually called multiple times, once for devices discovered
during the initial scan and again each time a driver is re-loaded.

The visible result is that interrupt pins are only assigned to hot plugged
devices when the device driver is loaded. Effectively this changes the PCI
probe API, since pci_dev->irq and the device's dma configuration will now
only be valid after pci_enable() was called at least once. A more subtle
change is that platform specific PCI device setup is moved from device
discovery into the driver's probe function, more specifically into the
pci_enable_device() call.

To fix the inconsistencies, add new function pcibios_add_device.
Call pcibios_setup_device from pcibios_setup_bus_devices if device setup
is not complete, and from pcibios_add_device if bus setup is complete.

With this change, device setup code is moved back into device initialization,
and called exactly once for both static and hot plugged devices.

[ This also fixes a regression introduced by the above patch which
  causes dev->irq to be overwritten under some cirumstances after
  MSIs have been enabled for the device which leads to crashes due
  to the MSI core "hijacking" dev->irq to store the base MSI number
  and not the LSI. --BenH
]

Cc: Yuanquan Chen <Yuanquan.Chen@freescale.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Hiroo Matsumoto <matsumoto.hiroo@jp.fujitsu.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Pull crypto fix from Herbert Xu:
 "This fixes a crash in the crypto layer exposed by an SCTP test tool"

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: algboss - Hold ref count on larval

Pull drm/qxl fix from Dave Airlie:
 "Bad me forgot an access check, possible security issue, but since this
  is the first kernel with it, should be fine to just put it in now"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/qxl: add missing access check for execbuffer ioctl

This __put_user() could be used by unprivileged processes to write into
kernel memory.  The issue here is that even if copy_siginfo_to_user()
fails, the error code is not checked before __put_user() is executed.

Luckily, ptrace_peek_siginfo() has been added within the 3.10-rc cycle,
so it has not hit a stable release yet.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Andrey Vagin <avagin@openvz.org>
Cc: Roland McGrath <roland@redhat.com>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Dave Jones <davej@redhat.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Pedro Alves <palves@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull Ceph fix from Sage Weil:
 "This is a recently spotted regression in the snapshot behavior...

  It turns out several tests weren't being run in the nightlies so this
  took a while to spot"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  rbd: send snapshot context with writes