- 26 Feb, 2022 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueDavid S. Miller authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-02-25 This series contains updates to iavf driver only. Slawomir fixes stability issues that can be seen when stressing the driver using a large number of VFs with a multitude of operations. Among the fixes are reworking mutexes to provide more effective locking, ensuring initialization is complete before teardown, preventing operations which could race while removing the driver, stopping certain tasks from being queued when the device is down, and adding a missing mutex unlock. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
- 25 Feb, 2022 35 commits
-
-
Jakub Kicinski authored
Merge tag 'linux-can-fixes-for-5.17-20220225' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2022-02-25 The first 2 patches are by Vincent Mailhol and fix the error handling of the ndo_open callbacks of the etas_es58x and the gs_usb CAN USB drivers. The last patch is by Lad Prabhakar and fixes a small race condition in the rcar_canfd's rcar_canfd_channel_probe() function. * tag 'linux-can-fixes-for-5.17-20220225' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: rcar_canfd: rcar_canfd_channel_probe(): register the CAN device when fully ready can: gs_usb: change active_channels's type from atomic_t to u8 can: etas_es58x: change opened_channel_cnt's type from atomic_t to u8 ==================== Link: https://lore.kernel.org/r/20220225165622.3231809-1-mkl@pengutronix.deSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Slawomir Laba authored
The setup of __IAVF_RESETTING state in watchdog task had no effect and could lead to slow resets in the driver as the task for __IAVF_RESETTING state only requeues watchdog. Till now the __IAVF_RESETTING was interpreted by reset task as running state which could lead to errors with allocating and resources disposal. Make watchdog_task queue the reset task when it's necessary. Do not update the state to __IAVF_RESETTING so the reset task knows exactly what is the current state of the adapter. Fixes: 898ef1cb ("iavf: Combine init and watchdog state machines") Signed-off-by:
Slawomir Laba <slawomirx.laba@intel.com> Signed-off-by:
Phani Burra <phani.r.burra@intel.com> Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Signed-off-by:
Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by:
Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com>
-
Slawomir Laba authored
The driver was queueing reset_task regardless of the netdev state. Do not queue the reset task in iavf_change_mtu if netdev is not running. Fixes: fdd4044f ("iavf: Remove timer for work triggering, use delaying work instead") Signed-off-by:
-
Slawomir Laba authored
There exists a missing mutex_unlock call on crit_lock in iavf_reset_task call path. Unlock the crit_lock before returning from reset task. Fixes: 5ac49f3c ("iavf: use mutexes for locking of critical sections") Signed-off-by:
-
Slawomir Laba authored
When iavf_init_version_check sends VIRTCHNL_OP_GET_VF_RESOURCES message, the driver will wait for the response after requeueing the watchdog task in iavf_init_get_resources call stack. The logic is implemented this way that iavf_init_get_resources has to be called in order to allocate adapter->vf_res. It is polling for the AQ response in iavf_get_vf_config function. Expect a call trace from kernel when adminq_task worker handles this message first. adapter->vf_res will be NULL in iavf_virtchnl_completion. Make the watchdog task not queue the adminq_task if the init process is not finished yet. Fixes: 898ef1cb ("iavf: Combine init and watchdog state machines") Signed-off-by:
-
Slawomir Laba authored
iavf_virtchnl_completion is called under crit_lock but when the code for VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS is called, this lock is released in order to obtain rtnl_lock to avoid ABBA deadlock with unregister_netdev. Along with the new way iavf_remove behaves, there exist many risks related to the lock release and attmepts to regrab it. The driver faces crashes related to races between unregister_netdev and netdev_update_features. Yet another risk is that the driver could already obtain the crit_lock in order to destroy it and iavf_virtchnl_completion could crash or block forever. Make iavf_virtchnl_completion never relock crit_lock in it's call paths. Extract rtnl_lock locking logic to the driver for unregister_netdev in order to set the netdev_registered flag inside the lock. Introduce a new flag that will inform adminq_task to perform the code from VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS right after it finishes processing messages. Guard this code with remove flags so it's never called when the driver is in remove state. Fixes: 5951a2b9 ("iavf: Fix VLAN feature flags after VFR") Signed-off-by:
-
Slawomir Laba authored
When init states of the adapter work, the errors like lack of communication with the PF might hop in. If such events occur the driver restores previous states in order to retry initialization in a proper way. When remove task kicks in, this situation could lead to races with unregistering the netdevice as well as resources cleanup. With the commit introducing the waiting in remove for init to complete, this problem turns into an endless waiting if init never recovers from errors. Introduce __IAVF_IN_REMOVE_TASK bit to indicate that the remove thread has started. Make __IAVF_COMM_FAILED adapter state respect the __IAVF_IN_REMOVE_TASK bit and set the __IAVF_INIT_FAILED state and return without any action instead of trying to recover. Make __IAVF_INIT_FAILED adapter state respect the __IAVF_IN_REMOVE_TASK bit and return without any further actions. Make the loop in the remove handler break when adapter has __IAVF_INIT_FAILED state set. Fixes: 898ef1cb ("iavf: Combine init and watchdog state machines") Signed-off-by:
-
Slawomir Laba authored
There exist races when port is being configured and remove is triggered. unregister_netdev is not and can't be called under crit_lock mutex since it is calling ndo_stop -> iavf_close which requires this lock. Depending on init state the netdev could be still unregistered so unregister_netdev never cleans up, when shortly after that the device could become registered. Make iavf_remove wait until port finishes initialization. All critical state changes are atomic (under crit_lock). Crashes that come from iavf_reset_interrupt_capability and iavf_free_traffic_irqs should now be solved in a graceful manner. Fixes: 605ca7c5 ("iavf: Fix kernel BUG in free_msi_irqs") Signed-off-by:
-
Slawomir Laba authored
The driver used to crash in multiple spots when put to stress testing of the init, reset and remove paths. The user would experience call traces or hangs when creating, resetting, removing VFs. Depending on the machines, the call traces are happening in random spots, like reset restoring resources racing with driver remove. Make adapter->crit_lock mutex a mandatory lock for guarding the operations performed on all workqueues and functions dealing with resource allocation and disposal. Make __IAVF_REMOVE a final state of the driver respected by workqueues that shall not requeue, when they fail to obtain the crit_lock. Make the IRQ handler not to queue the new work for adminq_task when the __IAVF_REMOVE state is set. Fixes: 5ac49f3c ("iavf: use mutexes for locking of critical sections") Signed-off-by:
-
Randy Dunlap authored
__setup() handlers should return 1 on success, i.e., the parameter has been handled. A return of 0 causes the "option=value" string to be added to init's environment strings, polluting it. Fixes: 47dd7a54 ("net: add support for STMicroelectronics Ethernet controllers.") Fixes: f3240e28 ("stmmac: remove warning when compile as built-in (V2)") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Reported-by:
Igor Zhbanov <i.zhbanov@omprussia.ru> Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: Jose Abreu <joabreu@synopsys.com> Link: https://lore.kernel.org/r/20220224033536.25056-1-rdunlap@infradead.orgSigned-off-by:
-
Randy Dunlap authored
__setup() handlers should return 1 on success, i.e., the parameter has been handled. A return of 0 causes the "option=value" string to be added to init's environment strings, polluting it. Fixes: acc18c14 ("net: sxgbe: add EEE(Energy Efficient Ethernet) for Samsung sxgbe") Fixes: 1edb9ca6 ("net: sxgbe: add basic framework for Samsung 10Gb ethernet driver") Signed-off-by:
-
Lad Prabhakar authored
Register the CAN device only when all the necessary initialization is completed. This patch makes sure all the data structures and locks are initialized before registering the CAN device. Link: https://lore.kernel.org/all/20220221225935.12300-1-prabhakar.mahadev-lad.rj@bp.renesas.comReported-by:
Pavel Machek <pavel@denx.de> Signed-off-by:
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by:
Ulrich Hecht <uli+renesas@fpond.eu> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Casper Andersson authored
Check if operation is valid before changing any settings in hardware. Otherwise it results in changes being made despite it not being a valid operation. Fixes: 78eab33b ("net: sparx5: add vlan support") Signed-off-by:
Casper Andersson <casper.casan@gmail.com> Signed-off-by:
-
Jia-Ju Bai authored
The function pci_find_capability() in t3_prep_adapter() can fail, so its return value should be checked. Fixes: 4d22de3e ("Add support for the latest 1G/10G Chelsio adapter, T3") Reported-by:
TOTE Robot <oslab@tsinghua.edu.cn> Signed-off-by:
Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by:
-
David S. Miller authored
Sukadev Bhattiprolu says: ==================== ibmvnic: Fix a race in ibmvnic_probe() If we get a transport (reset) event right after a successful CRQ_INIT during ibmvnic_probe() but before we set the adapter state to VNIC_PROBED, we will throw away the reset assuming that the adapter is still in the probing state. But since the adapter has completed the CRQ_INIT any subsequent CRQs the we send will be ignored by the vnicserver until we release/init the CRQ again. This can leave the adapter unconfigured. While here fix a couple of other bugs that were observed (Patches 1,2,4). ==================== Signed-off-by: -
Sukadev Bhattiprolu authored
We currently don't allow queuing resets when adapter is in VNIC_PROBING state - instead we throw away the reset and return EBUSY. The reasoning is probably that during ibmvnic_probe() the ibmvnic_adapter itself is being initialized so performing a reset during this time can lead us to accessing fields in the ibmvnic_adapter that are not fully initialized. A review of the code shows that all the adapter state neede to process a reset is initialized before registering the CRQ so that should no longer be a concern. Further the expectation is that if we do get a reset (transport event) during probe, the do..while() loop in ibmvnic_probe() will handle this by reinitializing the CRQ. While that is true to some extent, it is possible that the reset might occur _after_ the CRQ is registered and CRQ_INIT message was exchanged but _before_ the adapter state is set to VNIC_PROBED. As mentioned above, such a reset will be thrown away. While the client assumes that the adapter is functional, the vnic server will wait for the client to reinit the adapter. This disconnect between the two leaves the adapter down needing manual intervention. Because ibmvnic_probe() has other work to do after initializing the CRQ (such as registering the netdev at a minimum) and because the reset event can occur at any instant after the CRQ is initialized, there will always be a window between initializing the CRQ and considering the adapter ready for resets (ie state == PROBED). So rather than discarding resets during this window, allow queueing them - but only process them after the adapter is fully initialized. To do this, introduce a new completion state ->probe_done and have the reset worker thread wait on this before processing resets. This change brings up two new situations in or just after ibmvnic_probe(). First after one or more resets were queued, we encounter an error and decide to retry the initialization. At that point the queued resets are no longer relevant since we could be talking to a new vnic server. So we must purge/flush the queued resets before restarting the initialization. As a side note, since we are still in the probing stage and we have not registered the netdev, it will not be CHANGE_PARAM reset. Second this change opens up a potential race between the worker thread in __ibmvnic_reset(), the tasklet and the ibmvnic_open() due to the following sequence of events: 1. Register CRQ 2. Get transport event before CRQ_INIT completes. 3. Tasklet schedules reset: a) add rwi to list b) schedule_work() to start worker thread which runs and waits for ->probe_done. 4. ibmvnic_probe() decides to retry, purges rwi_list 5. Re-register crq and this time rest of probe succeeds - register netdev and complete(->probe_done). 6. Worker thread resumes in __ibmvnic_reset() from 3b. 7. Worker thread sets ->resetting bit 8. ibmvnic_open() comes in, notices ->resetting bit, sets state to IBMVNIC_OPEN and returns early expecting worker thread to finish the open. 9. Worker thread finds rwi_list empty and returns without opening the interface. If this happens, the ->ndo_open() call is effectively lost and the interface remains down. To address this, ensure that ->rwi_list is not empty before setting the ->resetting bit. See also comments in __ibmvnic_reset(). Fixes: 6a2fb0e9 ("ibmvnic: driver initialization for kdump/kexec") Signed-off-by:
Sukadev Bhattiprolu <sukadev@linux.ibm.com> Signed-off-by:
-
Sukadev Bhattiprolu authored
Clear ->failover_pending flag that may have been set in the previous pass of registering CRQ. If we don't clear, a subsequent ibmvnic_open() call would be misled into thinking a failover is pending and assuming that the reset worker thread would open the adapter. If this pass of registering the CRQ succeeds (i.e there is no transport event), there wouldn't be a reset worker thread. This would leave the adapter unconfigured and require manual intervention to bring it up during boot. Fixes: 5a18e1e0 ("ibmvnic: Fix failover case for non-redundant configuration") Signed-off-by:
-
Sukadev Bhattiprolu authored
We currently initialize the ->init_done completion/return code fields before issuing a CRQ_INIT command. But if we get a transport event soon after registering the CRQ the taskslet may already have recorded the completion and error code. If we initialize here, we might overwrite/ lose that and end up issuing the CRQ_INIT only to timeout later. If that timeout happens during probe, we will leave the adapter in the DOWN state rather than retrying to register/init the CRQ. Initialize the completion before registering the CRQ so we don't lose the notification. Fixes: 032c5e82 ("Driver for IBM System i/p VNIC protocol") Signed-off-by:
-
Sukadev Bhattiprolu authored
Finish initializing the adapter before registering netdev so state is consistent. Fixes: c26eba03 ("ibmvnic: Update reset infrastructure to support tunable parameters") Signed-off-by:
-
Sukadev Bhattiprolu authored
If we get a transport event, set the error and mark the init as complete so the attempt to send crq-init or login fail sooner rather than wait for the timeout. Fixes: bbd669a8 ("ibmvnic: Fix completion structure initialization") Signed-off-by:
-
Sukadev Bhattiprolu authored
Define and use a helper to flush the reset queue. Fixes: 2770a798 ("ibmvnic: Introduce hard reset recovery") Signed-off-by:
-
Sukadev Bhattiprolu authored
We should initialize ->init_done_rc before calling complete(). Otherwise the waiting thread may see ->init_done_rc as 0 before we have updated it and may assume that the CRQ was successful. Fixes: 6b278c0c ("ibmvnic delay complete()") Signed-off-by:
-
Sukadev Bhattiprolu authored
Fix a tiny memory leak when flushing the reset work queue. Fixes: 2770a798 ("ibmvnic: Introduce hard reset recovery") Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsecDavid S. Miller authored
Steffen Klassert says: ==================== 1) Fix PMTU for IPv6 if the reported MTU minus the ESP overhead is smaller than 1280. From Jiri Bohac. 2) Fix xfrm interface ID and inter address family tunneling when migrating xfrm states. From Yan Yan. 3) Add missing xfrm intrerface ID initialization on xfrmi_changelink. From Antony Antony. 4) Enforce validity of xfrm offload input flags so that userspace can't send undefined flags to the offload driver. From Leon Romanovsky. ==================== Signed-off-by: -
Vladimir Oltean authored
If I'm not mistaken (and I don't think I am), the way in which the dcbnl_ops work is that drivers call dcb_ieee_setapp() and this populates the application table with dynamically allocated struct dcb_app_type entries that are kept in the module-global dcb_app_list. However, nobody keeps exact track of these entries, and although dcb_ieee_delapp() is supposed to remove them, nobody does so when the interface goes away (example: driver unbinds from device). So the dcb_app_list will contain lingering entries with an ifindex that no longer matches any device in dcb_app_lookup(). Reclaim the lost memory by listening for the NETDEV_UNREGISTER event and flushing the app table entries of interfaces that are now gone. In fact something like this used to be done as part of the initial commit (blamed below), but it was done in dcbnl_exit() -> dcb_flushapp(), essentially at module_exit time. That became dead code after commit 7a6b6f51 ("DCB: fix kconfig option") which essentially merged "tristate config DCB" and "bool config DCBNL" into a single "bool config DCB", so net/dcb/dcbnl.c could not be built as a module anymore. Commit 36b9ad80 ("net/dcb: make dcbnl.c explicitly non-modular") recognized this and deleted dcbnl_exit() and dcb_flushapp() altogether, leaving us with the version we have today. Since flushing application table entries can and should be done as soon as the netdevice disappears, fundamentally the commit that is to blame is the one that introduced the design of this API. Fixes: 9ab933ab ("dcbnl: add appliction tlv handlers") Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
D. Wythe authored
There's a potential leak issue under following execution sequence : smc_release smc_connect_work if (sk->sk_state == SMC_INIT) send_clc_confirim tcp_abort(); ... sk.sk_state = SMC_ACTIVE smc_close_active switch(sk->sk_state) { ... case SMC_ACTIVE: smc_close_final() // then wait peer closed Unfortunately, tcp_abort() may discard CLC CONFIRM messages that are still in the tcp send buffer, in which case our connection token cannot be delivered to the server side, which means that we cannot get a passive close message at all. Therefore, it is impossible for the to be disconnected at all. This patch tries a very simple way to avoid this issue, once the state has changed to SMC_ACTIVE after tcp_abort(), we can actively abort the smc connection, considering that the state is SMC_INIT before tcp_abort(), abandoning the complete disconnection process should not cause too much problem. In fact, this problem may exist as long as the CLC CONFIRM message is not received by the server. Whether a timer should be added after smc_close_final() needs to be discussed in the future. But even so, this patch provides a faster release for connection in above case, it should also be valuable. Fixes: 39f41f36 ("net/smc: common release code for non-accepted sockets") Signed-off-by:D. Wythe <alibuda@linux.alibaba.com> Acked-by:
Karsten Graul <kgraul@linux.ibm.com> Signed-off-by:
-
Vincent Whitchurch authored
In this driver's ->ndo_open() callback, it enables DMA interrupts, starts the DMA channels, then requests interrupts with request_irq(), and then finally enables napi. If RX DMA interrupts are received before napi is enabled, no processing is done because napi_schedule_prep() will return false. If the network has a lot of broadcast/multicast traffic, then the RX ring could fill up completely before napi is enabled. When this happens, no further RX interrupts will be delivered, and the driver will fail to receive any packets. Fix this by only enabling DMA interrupts after all other initialization is complete. Fixes: 523f11b5 ("net: stmmac: move hardware setup for stmmac_open to new function") Reported-by:
Lars Persson <larper@axis.com> Signed-off-by:
Vincent Whitchurch <vincent.whitchurch@axis.com> Signed-off-by:
-
Marek Marczykowski-Górecki authored
xennet_destroy_queues() relies on info->netdev->real_num_tx_queues to delete queues. Since d7dac083 ("net-sysfs: update the queue counts in the unregistration path"), unregister_netdev() indirectly sets real_num_tx_queues to 0. Those two facts together means, that xennet_destroy_queues() called from xennet_remove() cannot do its job, because it's called after unregister_netdev(). This results in kfree-ing queues that are still linked in napi, which ultimately crashes: BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 1 PID: 52 Comm: xenwatch Tainted: G W 5.16.10-1.32.fc32.qubes.x86_64+ #226 RIP: 0010:free_netdev+0xa3/0x1a0 Code: ff 48 89 df e8 2e e9 00 00 48 8b 43 50 48 8b 08 48 8d b8 a0 fe ff ff 48 8d a9 a0 fe ff ff 49 39 c4 75 26 eb 47 e8 ed c1 66 ff <48> 8b 85 60 01 00 00 48 8d 95 60 01 00 00 48 89 ef 48 2d 60 01 00 RSP: 0000:ffffc90000bcfd00 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff88800edad000 RCX: 0000000000000000 RDX: 0000000000000001 RSI: ffffc90000bcfc30 RDI: 00000000ffffffff RBP: fffffffffffffea0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000001 R12: ffff88800edad050 R13: ffff8880065f8f88 R14: 0000000000000000 R15: ffff8880066c6680 FS: 0000000000000000(0000) GS:ffff8880f3300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000000e998c006 CR4: 00000000003706e0 Call Trace: <TASK> xennet_remove+0x13d/0x300 [xen_netfront] xenbus_dev_remove+0x6d/0xf0 __device_release_driver+0x17a/0x240 device_release_driver+0x24/0x30 bus_remove_device+0xd8/0x140 device_del+0x18b/0x410 ? _raw_spin_unlock+0x16/0x30 ? klist_iter_exit+0x14/0x20 ? xenbus_dev_request_and_reply+0x80/0x80 device_unregister+0x13/0x60 xenbus_dev_changed+0x18e/0x1f0 xenwatch_thread+0xc0/0x1a0 ? do_wait_intr_irq+0xa0/0xa0 kthread+0x16b/0x190 ? set_kthread_struct+0x40/0x40 ret_from_fork+0x22/0x30 </TASK> Fix this by calling xennet_destroy_queues() from xennet_uninit(), when real_num_tx_queues is still available. This ensures that queues are destroyed when real_num_tx_queues is set to 0, regardless of how unregister_netdev() was called. Originally reported at https://github.com/QubesOS/qubes-issues/issues/7257 Fixes: d7dac083 ("net-sysfs: update the queue counts in the unregistration path") Cc: stable@vger.kernel.org Signed-off-by:
Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Signed-off-by:
-
Vincent Mailhol authored
The driver uses an atomic_t variable: gs_usb:active_channels to keep track of the number of opened channels in order to only allocate memory for the URBs when this count changes from zero to one. However, the driver does not decrement the counter when an error occurs in gs_can_open(). This issue is fixed by changing the type from atomic_t to u8 and by simplifying the logic accordingly. It is safe to use an u8 here because the network stack big kernel lock (a.k.a. rtnl_mutex) is being hold. For details, please refer to [1]. [1] https://lore.kernel.org/linux-can/CAMZ6Rq+sHpiw34ijPsmp7vbUpDtJwvVtdV7CvRZJsLixjAFfrg@mail.gmail.com/T/#t Fixes: d08e973a ("can: gs_usb: Added support for the GS_USB CAN devices") Link: https://lore.kernel.org/all/20220214234814.1321599-1-mailhol.vincent@wanadoo.frSigned-off-by:
Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by:
-
Vincent Mailhol authored
The driver uses an atomic_t variable: struct es58x_device::opened_channel_cnt to keep track of the number of opened channels in order to only allocate memory for the URBs when this count changes from zero to one. While the intent was to prevent race conditions, the choice of an atomic_t turns out to be a bad idea for several reasons: - implementation is incorrect and fails to decrement opened_channel_cnt when the URB allocation fails as reported in [1]. - even if opened_channel_cnt were to be correctly decremented, atomic_t is insufficient to cover edge cases: there can be a race condition in which 1/ a first process fails to allocate URBs memory 2/ a second process enters es58x_open() before the first process does its cleanup and decrements opened_channed_cnt. In which case, the second process would successfully return despite the URBs memory not being allocated. - actually, any kind of locking mechanism was useless here because it is redundant with the network stack big kernel lock (a.k.a. rtnl_lock) which is being hold by all the callers of net_device_ops:ndo_open() and net_device_ops:ndo_close(). c.f. the ASSERST_RTNL() calls in __dev_open() [2] and __dev_close_many() [3]. The atmomic_t is thus replaced by a simple u8 type and the logic to increment and decrement es58x_device:opened_channel_cnt is simplified accordingly fixing the bug reported in [1]. We do not check again for ASSERST_RTNL() as this is already done by the callers. [1] https://lore.kernel.org/linux-can/20220201140351.GA2548@kili/T/#u [2] https://elixir.bootlin.com/linux/v5.16/source/net/core/dev.c#L1463 [3] https://elixir.bootlin.com/linux/v5.16/source/net/core/dev.c#L1541 Fixes: 85372578 ("can: etas_es58x: add core support for ETAS ES58X CAN USB interfaces") Link: https://lore.kernel.org/all/20220212112713.577957-1-mailhol.vincent@wanadoo.frReported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Jakub Kicinski authored
Mat Martineau says: ==================== mptcp: Fixes for 5.17 Patch 1 fixes an issue with the SIOCOUTQ ioctl in MPTCP sockets that have performed a fallback to TCP. Patch 2 is a selftest fix to correctly remove temp files. Patch 3 fixes a shift-out-of-bounds issue found by syzkaller. ==================== Link: https://lore.kernel.org/r/20220225005259.318898-1-mathew.j.martineau@linux.intel.comSigned-off-by:
-
Mat Martineau authored
Syzkaller with UBSAN uncovered a scenario where a large number of DATA_FIN retransmits caused a shift-out-of-bounds in the DATA_FIN timeout calculation: ================================================================================ UBSAN: shift-out-of-bounds in net/mptcp/protocol.c:470:29 shift exponent 32 is too large for 32-bit type 'unsigned int' CPU: 1 PID: 13059 Comm: kworker/1:0 Not tainted 5.17.0-rc2-00630-g5fbf21c90c60 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Workqueue: events mptcp_worker Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 ubsan_epilogue+0xb/0x5a lib/ubsan.c:151 __ubsan_handle_shift_out_of_bounds.cold+0xb2/0x20e lib/ubsan.c:330 mptcp_set_datafin_timeout net/mptcp/protocol.c:470 [inline] __mptcp_retrans.cold+0x72/0x77 net/mptcp/protocol.c:2445 mptcp_worker+0x58a/0xa70 net/mptcp/protocol.c:2528 process_one_work+0x9df/0x16d0 kernel/workqueue.c:2307 worker_thread+0x95/0xe10 kernel/workqueue.c:2454 kthread+0x2f4/0x3b0 kernel/kthread.c:377 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 </TASK> ================================================================================ This change limits the maximum timeout by limiting the size of the shift, which keeps all intermediate values in-bounds. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/259 Fixes: 6477dd39 ("mptcp: Retransmit DATA_FIN") Acked-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by:
-
Paolo Abeni authored
After commit 05be5e27 ("selftests: mptcp: add disconnect tests") the mptcp selftests leave behind a couple of tmp files after each run. run_tests_disconnect() misnames a few variables used to track them. Address the issue setting the appropriate global variables Fixes: 05be5e27 ("selftests: mptcp: add disconnect tests") Signed-off-by:
-
Paolo Abeni authored
The MPTCP SIOCOUTQ implementation is not very accurate in case of fallback: it only measures the data in the MPTCP-level write queue, but it does not take in account the subflow write queue utilization. In case of fallback the first can be empty, while the latter is not. The above produces sporadic self-tests issues and can foul legit user-space application. Fix the issue additionally querying the subflow in case of fallback. Fixes: 644807e3 ("mptcp: add SIOCINQ, OUTQ and OUTQNSD ioctls") Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/260Reported-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetoothJakub Kicinski authored
Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - Fix regression with RFCOMM - Fix regression with LE devices using Privacy (RPA) - Fix regression with LE devices not waiting proper timeout to establish connections - Fix race in smp * tag 'for-net-2022-02-24' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: hci_sync: Fix not using conn_timeout Bluetooth: hci_sync: Fix hci_update_accept_list_sync Bluetooth: assign len after null check Bluetooth: Fix bt_skb_sendmmsg not allocating partial chunks Bluetooth: fix data races in smp_unregister(), smp_del_chan() Bluetooth: hci_core: Fix leaking sent_cmd skb ==================== Link: https://lore.kernel.org/r/20220224210838.197787-1-luiz.dentz@gmail.comSigned-off-by:
-
- 24 Feb, 2022 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull pci fixes from Bjorn Helgaas: - Fix a merge error that broke PCI device enumeration on mvebu platforms, including Turris Omnia (Armada 385) (Pali Rohár) - Avoid using ATS on all AMD Navi10 and Navi14 GPUs because some VBIOSes don't account for "harvested" (disabled) parts of the chip when initializing caches (Alex Deucher) * tag 'pci-v5.17-fixes-5' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: Mark all AMD Navi10 and Navi14 GPU ATS as broken PCI: mvebu: Fix device enumeration regression
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from bpf and netfilter. Current release - regressions: - bpf: fix crash due to out of bounds access into reg2btf_ids - mvpp2: always set port pcs ops, avoid null-deref - eth: marvell: fix driver load from initrd - eth: intel: revert "Fix reset bw limit when DCB enabled with 1 TC" Current release - new code bugs: - mptcp: fix race in overlapping signal events Previous releases - regressions: - xen-netback: revert hotplug-status changes causing devices to not be configured - dsa: - avoid call to __dev_set_promiscuity() while rtnl_mutex isn't held - fix panic when removing unoffloaded port from bridge - dsa: microchip: fix bridging with more than two member ports Previous releases - always broken: - bpf: - fix crash due to incorrect copy_map_value when both spin lock and timer are present in a single value - fix a bpf_timer initialization issue with clang - do not try bpf_msg_push_data with len 0 - add schedule points in batch ops - nf_tables: - unregister flowtable hooks on netns exit - correct flow offload action array size - fix a couple of memory leaks - vsock: don't check owner in vhost_vsock_stop() while releasing - gso: do not skip outer ip header in case of ipip and net_failover - smc: use a mutex for locking "struct smc_pnettable" - openvswitch: fix setting ipv6 fields causing hw csum failure - mptcp: fix race in incoming ADD_ADDR option processing - sysfs: add check for netdevice being present to speed_show - sched: act_ct: fix flow table lookup after ct clear or switching zones - eth: intel: fixes for SR-IOV forwarding offloads - eth: broadcom: fixes for selftests and error recovery - eth: mellanox: flow steering and SR-IOV forwarding fixes Misc: - make __pskb_pull_tail() & pskb_carve_frag_list() drop_monitor friends not report freed skbs as drops - force inlining of checksum functions in net/checksum.h" * tag 'net-5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (85 commits) net: mv643xx_eth: process retval from of_get_mac_address ping: remove pr_err from ping_lookup Revert "i40e: Fix reset bw limit when DCB enabled with 1 TC" openvswitch: Fix setting ipv6 fields causing hw csum failure ipv6: prevent a possible race condition with lifetimes net/smc: Use a mutex for locking "struct smc_pnettable" bnx2x: fix driver load from initrd Revert "xen-netback: Check for hotplug-status existence before watching" Revert "xen-netback: remove 'hotplug-status' once it has served its purpose" net/mlx5e: Fix VF min/max rate parameters interchange mistake net/mlx5e: Add missing increment of count net/mlx5e: MPLSoUDP decap, fix check for unsupported matches net/mlx5e: Fix MPLSoUDP encap to use MPLS action information net/mlx5e: Add feature check for set fec counters net/mlx5e: TC, Skip redundant ct clear actions net/mlx5e: TC, Reject rules with forward and drop actions net/mlx5e: TC, Reject rules with drop and modify hdr action net/mlx5e: kTLS, Use CHECKSUM_UNNECESSARY for device-offloaded packets net/mlx5e: Fix wrong return value on ioctl EEPROM query failure net/mlx5: Fix possible deadlock on rule deletion ... -
Luiz Augusto von Dentz authored
When using hci_le_create_conn_sync it shall wait for the conn_timeout since the connection complete may take longer than just 2 seconds. Also fix the masking of HCI_EV_LE_ENHANCED_CONN_COMPLETE and HCI_EV_LE_CONN_COMPLETE so they are never both set so we can predict which one the controller will use in case of HCI_OP_LE_CREATE_CONN. Fixes: 6cd29ec6 ("Bluetooth: hci_sync: Wait for proper events when connecting LE") Signed-off-by:
Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org>
-
Luiz Augusto von Dentz authored
hci_update_accept_list_sync is returning the filter based on the error but that gets overwritten by hci_le_set_addr_resolution_enable_sync return instead of using the actual result of the likes of hci_le_add_accept_list_sync which was intended. Fixes: ad383c2c ("Bluetooth: hci_sync: Enable advertising when LL privacy is enabled") Signed-off-by:
-
