Fixes the following W=1 kernel build warning(s):

 drivers/staging/most/dim2/hal.c:99: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
 drivers/staging/most/dim2/hal.c:788: warning: Function parameter or member 'buf_size' not described in 'dim_norm_isoc_buffer_size'
 drivers/staging/most/dim2/hal.c:788: warning: Function parameter or member 'packet_length' not described in 'dim_norm_isoc_buffer_size'
 drivers/staging/most/dim2/hal.c:788: warning: expecting prototype for Retrieves maximal possible correct buffer size for isochronous data type(). Prototype was for dim_norm_isoc_buffer_size() instead
 drivers/staging/most/dim2/hal.c:802: warning: Function parameter or member 'buf_size' not described in 'dim_norm_sync_buffer_size'
 drivers/staging/most/dim2/hal.c:802: warning: Function parameter or member 'bytes_per_frame' not described in 'dim_norm_sync_buffer_size'
 drivers/staging/most/dim2/hal.c:802: warning: expecting prototype for Retrieves maximal possible correct buffer size for synchronous data type(). Prototype was for dim_norm_sync_buffer_size() instead

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Cc: linux-staging@lists.linux.dev
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210414181129.1628598-36-lee.jones@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes the following W=1 kernel build warning(s):

 drivers/staging/most/dim2/hal.c:99: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
 drivers/staging/most/dim2/hal.c:788: warning: Function parameter or member 'buf_size' not described in 'dim_norm_isoc_buffer_size'
 drivers/staging/most/dim2/hal.c:788: warning: Function parameter or member 'packet_length' not described in 'dim_norm_isoc_buffer_size'
 drivers/staging/most/dim2/hal.c:788: warning: expecting prototype for Retrieves maximal possible correct buffer size for isochronous data type(). Prototype was for dim_norm_isoc_buffer_size() instead
 drivers/staging/most/dim2/hal.c:802: warning: Function parameter or member 'buf_size' not described in 'dim_norm_sync_buffer_size'
 drivers/staging/most/dim2/hal.c:802: warning: Function parameter or member 'bytes_per_frame' not described in 'dim_norm_sync_buffer_size'
 drivers/staging/most/dim2/hal.c:802: warning: expecting prototype for Retrieves maximal possible correct buffer size for synchronous data type(). Prototype was for dim_norm_sync_buffer_size() instead

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Cc: linux-staging@lists.linux.dev
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210414181129.1628598-35-lee.jones@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes the following W=1 kernel build warning(s):

 drivers/staging/most/i2c/i2c.c:66: warning: Function parameter or member 'most_iface' not described in 'configure_channel'
 drivers/staging/most/i2c/i2c.c:66: warning: Function parameter or member 'ch_idx' not described in 'configure_channel'
 drivers/staging/most/i2c/i2c.c:66: warning: Excess function parameter 'iface' description in 'configure_channel'
 drivers/staging/most/i2c/i2c.c:66: warning: Excess function parameter 'channel' description in 'configure_channel'
 drivers/staging/most/i2c/i2c.c:121: warning: Function parameter or member 'most_iface' not described in 'enqueue'
 drivers/staging/most/i2c/i2c.c:121: warning: Function parameter or member 'ch_idx' not described in 'enqueue'
 drivers/staging/most/i2c/i2c.c:121: warning: Excess function parameter 'iface' description in 'enqueue'
 drivers/staging/most/i2c/i2c.c:121: warning: Excess function parameter 'channel' description in 'enqueue'
 drivers/staging/most/i2c/i2c.c:166: warning: Function parameter or member 'most_iface' not described in 'poison_channel'
 drivers/staging/most/i2c/i2c.c:166: warning: Function parameter or member 'ch_idx' not described in 'poison_channel'
 drivers/staging/most/i2c/i2c.c:166: warning: Excess function parameter 'iface' description in 'poison_channel'
 drivers/staging/most/i2c/i2c.c:166: warning: Excess function parameter 'channel_id' description in 'poison_channel'

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Cc: linux-staging@lists.linux.dev
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210414181129.1628598-34-lee.jones@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes the following W=1 kernel build warning(s):

 drivers/staging/rtl8723bs/core/rtw_mlme.c: In function ‘rtw_joinbss_event_prehandle’:
 drivers/staging/rtl8723bs/core/rtw_mlme.c:1192:12: warning: variable ‘retry’ set but not used [-Wunused-but-set-variable]

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Fabio Aiuto <fabioaiuto83@gmail.com>
Cc: linux-staging@lists.linux.dev
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210414181129.1628598-32-lee.jones@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes the following W=1 kernel build warning(s):

 drivers/staging/rtl8723bs/core/rtw_ieee80211.c: In function ‘rtw_ies_remove_ie’:
 drivers/staging/rtl8723bs/core/rtw_ieee80211.c:259:1: warning: the frame size of 1048 bytes is larger than 1024 bytes [-Wframe-larger-than=]

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-staging@lists.linux.dev
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210414181129.1628598-31-lee.jones@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Also demote merely half-complete header.

Fixes the following W=1 kernel build warning(s):

 drivers/staging/most/dim2/dim2.c:69: warning: Function parameter or member 'name' not described in 'hdm_channel'
 drivers/staging/most/dim2/dim2.c:69: warning: Function parameter or member 'reset_dbr_size' not described in 'hdm_channel'
 drivers/staging/most/dim2/dim2.c:104: warning: Function parameter or member 'dev' not described in 'dim2_hdm'
 drivers/staging/most/dim2/dim2.c:104: warning: Function parameter or member 'name' not described in 'dim2_hdm'
 drivers/staging/most/dim2/dim2.c:104: warning: Function parameter or member 'clk_speed' not described in 'dim2_hdm'
 drivers/staging/most/dim2/dim2.c:104: warning: Function parameter or member 'clk' not described in 'dim2_hdm'
 drivers/staging/most/dim2/dim2.c:104: warning: Function parameter or member 'clk_pll' not described in 'dim2_hdm'
 drivers/staging/most/dim2/dim2.c:104: warning: Function parameter or member 'bus' not described in 'dim2_hdm'
 drivers/staging/most/dim2/dim2.c:104: warning: Function parameter or member 'on_netinfo' not described in 'dim2_hdm'
 drivers/staging/most/dim2/dim2.c:104: warning: Function parameter or member 'disable_platform' not described in 'dim2_hdm'
 drivers/staging/most/dim2/dim2.c:440: warning: Function parameter or member 'most_iface' not described in 'configure_channel'
 drivers/staging/most/dim2/dim2.c:440: warning: Function parameter or member 'ch_idx' not described in 'configure_channel'
 drivers/staging/most/dim2/dim2.c:440: warning: Function parameter or member 'ccfg' not described in 'configure_channel'
 drivers/staging/most/dim2/dim2.c:440: warning: Excess function parameter 'iface' description in 'configure_channel'
 drivers/staging/most/dim2/dim2.c:440: warning: Excess function parameter 'channel' description in 'configure_channel'
 drivers/staging/most/dim2/dim2.c:440: warning: Excess function parameter 'channel_config' description in 'configure_channel'
 drivers/staging/most/dim2/dim2.c:558: warning: Function parameter or member 'most_iface' not described in 'enqueue'
 drivers/staging/most/dim2/dim2.c:558: warning: Function parameter or member 'ch_idx' not described in 'enqueue'
 drivers/staging/most/dim2/dim2.c:558: warning: Excess function parameter 'iface' description in 'enqueue'
 drivers/staging/most/dim2/dim2.c:558: warning: Excess function parameter 'channel' description in 'enqueue'
 drivers/staging/most/dim2/dim2.c:591: warning: Function parameter or member 'most_iface' not described in 'request_netinfo'
 drivers/staging/most/dim2/dim2.c:591: warning: Function parameter or member 'ch_idx' not described in 'request_netinfo'
 drivers/staging/most/dim2/dim2.c:591: warning: Function parameter or member 'on_netinfo' not described in 'request_netinfo'
 drivers/staging/most/dim2/dim2.c:591: warning: Excess function parameter 'iface' description in 'request_netinfo'
 drivers/staging/most/dim2/dim2.c:591: warning: Excess function parameter 'channel_id' description in 'request_netinfo'
 drivers/staging/most/dim2/dim2.c:631: warning: Function parameter or member 'most_iface' not described in 'poison_channel'
 drivers/staging/most/dim2/dim2.c:631: warning: Function parameter or member 'ch_idx' not described in 'poison_channel'
 drivers/staging/most/dim2/dim2.c:631: warning: Excess function parameter 'iface' description in 'poison_channel'
 drivers/staging/most/dim2/dim2.c:631: warning: Excess function parameter 'channel_id' description in 'poison_channel'

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Nícolas F. R. A. Prado" <nfraprado@protonmail.com>
Cc: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Cc: linux-staging@lists.linux.dev
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210414181129.1628598-30-lee.jones@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes the following W=1 kernel build warning(s):

 drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c: In function ‘ieee80211_rx_frame_softmac’:
 drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c:2009:1: warning: the frame size of 1152 bytes is larger than 1024 bytes [-Wframe-larger-than=]

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Romain Perier <romain.perier@gmail.com>
Cc: Allen Pais <apais@linux.microsoft.com>
Cc: Andrea Merello <andrea.merello@gmail.com>
Cc: linux-staging@lists.linux.dev
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210414181129.1628598-29-lee.jones@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The variable is used in the function using the macro.

Fixes the following W=1 kernel build warning(s):

 drivers/staging/vt6655/upc.h:45:16: warning: variable ‘byData’ set but not used [-Wunused-but-set-variable]

Cc: Forest Bond <forest@alittletooquiet.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-staging@lists.linux.dev
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210414181129.1628598-28-lee.jones@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes the following W=1 kernel build warning(s):

 drivers/staging/most/net/net.c:548: warning: Function parameter or member 'iface' not described in 'on_netinfo'
 drivers/staging/most/net/net.c:548: warning: Function parameter or member 'link_stat' not described in 'on_netinfo'
 drivers/staging/most/net/net.c:548: warning: Function parameter or member 'mac_addr' not described in 'on_netinfo'

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Cc: linux-staging@lists.linux.dev
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210414181129.1628598-27-lee.jones@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes the following W=1 kernel build warning(s):

 drivers/staging/sm750fb/sm750_accel.c:155: warning: Function parameter or member 'accel' not described in 'sm750_hw_copyarea'
 drivers/staging/sm750fb/sm750_accel.c:155: warning: expecting prototype for sm750_hm_copyarea(). Prototype was for sm750_hw_copyarea() instead
 drivers/staging/sm750fb/sm750_accel.c:321: warning: Function parameter or member 'accel' not described in 'sm750_hw_imageblit'

Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Teddy Wang <teddy.wang@siliconmotion.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-fbdev@vger.kernel.org
Cc: linux-staging@lists.linux.dev
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210414181129.1628598-26-lee.jones@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes the following W=1 kernel build warning(s):

 drivers/staging/fwserial/fwserial.c:52: warning: Function parameter or member 'fwserial_list' not described in 'LIST_HEAD'
 drivers/staging/fwserial/fwserial.c:52: warning: expecting prototype for fwserial_list(). Prototype was for LIST_HEAD() instead
 drivers/staging/fwserial/fwserial.c:62: warning: cannot understand function prototype: 'struct fwtty_port *port_table[MAX_TOTAL_PORTS]; '
 drivers/staging/fwserial/fwserial.c:295: warning: Function parameter or member 'port' not described in 'fwtty_update_port_status'
 drivers/staging/fwserial/fwserial.c:295: warning: Function parameter or member 'status' not described in 'fwtty_update_port_status'
 drivers/staging/fwserial/fwserial.c:388: warning: Function parameter or member 'port' not described in '__fwtty_port_line_status'
 drivers/staging/fwserial/fwserial.c:412: warning: Function parameter or member 'port' not described in '__fwtty_write_port_status'
 drivers/staging/fwserial/fwserial.c:433: warning: Function parameter or member 'port' not described in 'fwtty_write_port_status'
 drivers/staging/fwserial/fwserial.c:486: warning: Function parameter or member 'work' not described in 'fwtty_do_hangup'
 drivers/staging/fwserial/fwserial.c:605: warning: Function parameter or member 'card' not described in 'fwtty_port_handler'
 drivers/staging/fwserial/fwserial.c:605: warning: Function parameter or member 'request' not described in 'fwtty_port_handler'
 drivers/staging/fwserial/fwserial.c:605: warning: Function parameter or member 'tcode' not described in 'fwtty_port_handler'
 drivers/staging/fwserial/fwserial.c:605: warning: Function parameter or member 'destination' not described in 'fwtty_port_handler'
 drivers/staging/fwserial/fwserial.c:605: warning: Function parameter or member 'source' not described in 'fwtty_port_handler'
 drivers/staging/fwserial/fwserial.c:605: warning: Function parameter or member 'generation' not described in 'fwtty_port_handler'
 drivers/staging/fwserial/fwserial.c:605: warning: Function parameter or member 'addr' not described in 'fwtty_port_handler'
 drivers/staging/fwserial/fwserial.c:605: warning: Function parameter or member 'data' not described in 'fwtty_port_handler'
 drivers/staging/fwserial/fwserial.c:605: warning: Function parameter or member 'len' not described in 'fwtty_port_handler'
 drivers/staging/fwserial/fwserial.c:605: warning: Function parameter or member 'callback_data' not described in 'fwtty_port_handler'
 drivers/staging/fwserial/fwserial.c:605: warning: Excess function parameter 'parameters' description in 'fwtty_port_handler'
 drivers/staging/fwserial/fwserial.c:670: warning: Function parameter or member 'card' not described in 'fwtty_tx_complete'
 drivers/staging/fwserial/fwserial.c:670: warning: Function parameter or member 'rcode' not described in 'fwtty_tx_complete'
 drivers/staging/fwserial/fwserial.c:670: warning: Function parameter or member 'txn' not described in 'fwtty_tx_complete'
 drivers/staging/fwserial/fwserial.c:914: warning: Function parameter or member 'tty_port' not described in 'fwtty_port_carrier_raised'
 drivers/staging/fwserial/fwserial.c:1021: warning: Function parameter or member 'tty_port' not described in 'fwtty_port_shutdown'
 drivers/staging/fwserial/fwserial.c:1312: warning: Function parameter or member 'tty' not described in 'fwtty_break_ctl'
 drivers/staging/fwserial/fwserial.c:1312: warning: Function parameter or member 'state' not described in 'fwtty_break_ctl'
 drivers/staging/fwserial/fwserial.c:1681: warning: Function parameter or member 'peer' not described in 'fwserial_claim_port'
 drivers/staging/fwserial/fwserial.c:1681: warning: Function parameter or member 'index' not described in 'fwserial_claim_port'
 drivers/staging/fwserial/fwserial.c:1708: warning: Function parameter or member 'peer' not described in 'fwserial_find_port'
 drivers/staging/fwserial/fwserial.c:1775: warning: Function parameter or member 'peer' not described in 'fwserial_connect_peer'
 drivers/staging/fwserial/fwserial.c:1844: warning: Function parameter or member 'driver' not described in 'fwserial_close_port'
 drivers/staging/fwserial/fwserial.c:1844: warning: Function parameter or member 'port' not described in 'fwserial_close_port'
 drivers/staging/fwserial/fwserial.c:1911: warning: Function parameter or member 'card' not described in '__fwserial_peer_by_node_id'
 drivers/staging/fwserial/fwserial.c:1911: warning: Function parameter or member 'generation' not described in '__fwserial_peer_by_node_id'
 drivers/staging/fwserial/fwserial.c:1911: warning: Function parameter or member 'id' not described in '__fwserial_peer_by_node_id'
 drivers/staging/fwserial/fwserial.c:2090: warning: Function parameter or member 'peer' not described in 'fwserial_remove_peer'
 drivers/staging/fwserial/fwserial.c:2321: warning: Function parameter or member 'unit' not described in 'fwserial_probe'
 drivers/staging/fwserial/fwserial.c:2321: warning: Function parameter or member 'id' not described in 'fwserial_probe'
 drivers/staging/fwserial/fwserial.c:2344: warning: Function parameter or member 'unit' not described in 'fwserial_remove'
 drivers/staging/fwserial/fwserial.c:2382: warning: Function parameter or member 'unit' not described in 'fwserial_update'
 drivers/staging/fwserial/fwserial.c:2717: warning: Function parameter or member 'card' not described in 'fwserial_mgmt_handler'
 drivers/staging/fwserial/fwserial.c:2717: warning: Function parameter or member 'request' not described in 'fwserial_mgmt_handler'
 drivers/staging/fwserial/fwserial.c:2717: warning: Function parameter or member 'tcode' not described in 'fwserial_mgmt_handler'
 drivers/staging/fwserial/fwserial.c:2717: warning: Function parameter or member 'destination' not described in 'fwserial_mgmt_handler'
 drivers/staging/fwserial/fwserial.c:2717: warning: Function parameter or member 'source' not described in 'fwserial_mgmt_handler'
 drivers/staging/fwserial/fwserial.c:2717: warning: Function parameter or member 'generation' not described in 'fwserial_mgmt_handler'
 drivers/staging/fwserial/fwserial.c:2717: warning: Function parameter or member 'addr' not described in 'fwserial_mgmt_handler'
 drivers/staging/fwserial/fwserial.c:2717: warning: Function parameter or member 'data' not described in 'fwserial_mgmt_handler'
 drivers/staging/fwserial/fwserial.c:2717: warning: Function parameter or member 'len' not described in 'fwserial_mgmt_handler'
 drivers/staging/fwserial/fwserial.c:2717: warning: Function parameter or member 'callback_data' not described in 'fwserial_mgmt_handler'
 drivers/staging/fwserial/fwserial.c:2717: warning: Excess function parameter 'parameters' description in 'fwserial_mgmt_handler'

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: linux-staging@lists.linux.dev
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210414181129.1628598-25-lee.jones@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add comments to preserve documentation.

Fixes the following W=1 kernel build warning(s):

 drivers/staging/ks7010/ks_hostif.c: In function ‘hostif_mib_get_confirm’:
 drivers/staging/ks7010/ks_hostif.c:528:6: warning: variable ‘mib_val_type’ set but not used [-Wunused-but-set-variable]
 drivers/staging/ks7010/ks_hostif.c:527:6: warning: variable ‘mib_val_size’ set but not used [-Wunused-but-set-variable]
 drivers/staging/ks7010/ks_hostif.c: In function ‘hostif_infrastructure_set_confirm’:
 drivers/staging/ks7010/ks_hostif.c:849:6: warning: variable ‘result_code’ set but not used [-Wunused-but-set-variable]
 drivers/staging/ks7010/ks_hostif.c: In function ‘hostif_phy_information_confirm’:
 drivers/staging/ks7010/ks_hostif.c:929:19: warning: variable ‘noise’ set but not used [-Wunused-but-set-variable]

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-staging@lists.linux.dev
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210414181129.1628598-24-lee.jones@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes the following W=1 kernel build warning(s):

 drivers/staging/nvec/nvec.c:109: warning: Function parameter or member 'events' not described in 'nvec_register_notifier'
 drivers/staging/nvec/nvec.c:136: warning: Function parameter or member 'nb' not described in 'nvec_status_notifier'
 drivers/staging/nvec/nvec.c:136: warning: Function parameter or member 'event_type' not described in 'nvec_status_notifier'
 drivers/staging/nvec/nvec.c:136: warning: Function parameter or member 'data' not described in 'nvec_status_notifier'
 drivers/staging/nvec/nvec.c:358: warning: Function parameter or member 'ev' not described in 'nvec_event_mask'
 drivers/staging/nvec/nvec.c:358: warning: Function parameter or member 'mask' not described in 'nvec_event_mask'

Cc: Marc Dietrich <marvin24@gmx.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Kernel Team <ac100@lists.lauchpad.net>
Cc: Pierre-Hugues Husson <phhusson@free.fr>
Cc: Ilya Petrov <ilya.muromec@gmail.com>
Cc: Andres Klode <jak@jak-linux.org>
Cc: ac100@lists.launchpad.net
Cc: linux-tegra@vger.kernel.org
Cc: linux-staging@lists.linux.dev
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210414181129.1628598-23-lee.jones@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Also demote kernel-doc abuses

Fixes the following W=1 kernel build warning(s):

 drivers/staging/iio/frequency/ad9834.c:87: warning: Function parameter or member 'devid' not described in 'ad9834_state'
 drivers/staging/iio/frequency/ad9834.c:93: warning: cannot understand function prototype: 'enum ad9834_supported_device_ids '
 drivers/staging/iio/frequency/ad9834.c:320: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst

Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Michael Hennerich <Michael.Hennerich@analog.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-iio@vger.kernel.org
Cc: linux-staging@lists.linux.dev
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210414181129.1628598-22-lee.jones@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes the following W=1 kernel build warning(s):

 drivers/staging/rtl8712/rtl871x_mp_ioctl.c: In function ‘mp_start_test’:
 drivers/staging/rtl8712/rtl871x_mp_ioctl.c:204:1: warning: the frame size of 1136 bytes is larger than 1024 bytes [-Wframe-larger-than=]

Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Florian Schilhabel <florian.c.schilhabel@googlemail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Zhansaya Bagdauletkyzy <zhansayabagdaulet@gmail.com>
Cc: Michael Straube <straube.linux@gmail.com>
Cc: WLAN FAE <wlanfae@realtek.com>
Cc: linux-staging@lists.linux.dev
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210414181129.1628598-21-lee.jones@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes the following W=1 kernel build warning(s):

 drivers/staging/rtl8723bs/core/rtw_wlan_util.c: In function ‘process_addba_req’:
 drivers/staging/rtl8723bs/core/rtw_wlan_util.c:1774:11: warning: variable ‘start_seq’ set but not used [-Wunused-but-set-variable]
 from drivers/staging/rtl8188eu/core/rtw_wlan_util.c:12:

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-staging@lists.linux.dev
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210414181129.1628598-20-lee.jones@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes the following W=1 kernel build warning(s):

 drivers/staging/octeon/ethernet-tx.c:507: warning: bad line:

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: linux-staging@lists.linux.dev
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210414181129.1628598-19-lee.jones@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes the following W=1 kernel build warning(s):

 drivers/staging/rtl8723bs/core/rtw_sta_mgt.c: In function ‘rtw_init_bcmc_stainfo’:
 drivers/staging/rtl8723bs/core/rtw_sta_mgt.c:512:6: warning: variable ‘res’ set but not used [-Wunused-but-set-variable]

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ross Schmidt <ross.schm.dev@gmail.com>
Cc: linux-staging@lists.linux.dev
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210414181129.1628598-18-lee.jones@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes the following W=1 kernel build warning(s):

 drivers/staging/rtl8723bs/core/rtw_sta_mgt.c: In function ‘kfree_all_stainfo’:
 drivers/staging/rtl8723bs/core/rtw_sta_mgt.c:128:19: warning: variable ‘psta’ set but not used [-Wunused-but-set-variable]

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ross Schmidt <ross.schm.dev@gmail.com>
Cc: linux-staging@lists.linux.dev
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210414181129.1628598-17-lee.jones@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes the following W=1 kernel build warning(s):

 from drivers/staging/rtl8188eu/core/rtw_security.c:10:
 drivers/staging/rtl8188eu/core/rtw_security.c:478: warning: Function parameter or member 'p1k' not described in 'phase1'
 drivers/staging/rtl8188eu/core/rtw_security.c:478: warning: Function parameter or member 'tk' not described in 'phase1'
 drivers/staging/rtl8188eu/core/rtw_security.c:478: warning: Function parameter or member 'ta' not described in 'phase1'
 drivers/staging/rtl8188eu/core/rtw_security.c:517: warning: Function parameter or member 'rc4key' not described in 'phase2'
 drivers/staging/rtl8188eu/core/rtw_security.c:517: warning: Function parameter or member 'tk' not described in 'phase2'
 drivers/staging/rtl8188eu/core/rtw_security.c:517: warning: Function parameter or member 'p1k' not described in 'phase2'
 drivers/staging/rtl8723bs/core/rtw_security.c:1937: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-staging@lists.linux.dev
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210414181129.1628598-16-lee.jones@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes the following W=1 kernel build warning(s):

 from drivers/staging/rtl8188eu/core/rtw_security.c:10:
 drivers/staging/rtl8188eu/core/rtw_security.c:478: warning: Function parameter or member 'p1k' not described in 'phase1'
 drivers/staging/rtl8188eu/core/rtw_security.c:478: warning: Function parameter or member 'tk' not described in 'phase1'
 drivers/staging/rtl8188eu/core/rtw_security.c:478: warning: Function parameter or member 'ta' not described in 'phase1'
 drivers/staging/rtl8188eu/core/rtw_security.c:517: warning: Function parameter or member 'rc4key' not described in 'phase2'
 drivers/staging/rtl8188eu/core/rtw_security.c:517: warning: Function parameter or member 'tk' not described in 'phase2'
 drivers/staging/rtl8188eu/core/rtw_security.c:517: warning: Function parameter or member 'p1k' not described in 'phase2'
 drivers/staging/rtl8723bs/core/rtw_security.c:1937: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst

Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Michael Straube <straube.linux@gmail.com>
Cc: linux-staging@lists.linux.dev
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210414181129.1628598-15-lee.jones@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes the following W=1 kernel build warning(s):

 from drivers/staging/rtl8188eu/core/rtw_recv.c:12:
 drivers/staging/rtl8723bs/core/rtw_recv.c: In function ‘rtw_signal_stat_timer_hdl’:
 drivers/staging/rtl8723bs/core/rtw_recv.c:2341:6: warning: variable ‘num_signal_qual’ set but not used [-Wunused-but-set-variable]

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-staging@lists.linux.dev
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210414181129.1628598-14-lee.jones@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes the following W=1 kernel build warning(s):

 drivers/staging/rtl8712/rtl871x_mp_ioctl.h:256:34: warning: ‘oid_rtl_seg_81_85’ defined but not used [-Wunused-const-variable=]
 drivers/staging/rtl8712/rtl871x_mp_ioctl.h:249:34: warning: ‘oid_rtl_seg_81_80_80’ defined but not used [-Wunused-const-variable=]
 drivers/staging/rtl8712/rtl871x_mp_ioctl.h:240:34: warning: ‘oid_rtl_seg_81_80_40’ defined but not used [-Wunused-const-variable=]
 drivers/staging/rtl8712/rtl871x_mp_ioctl.h:205:34: warning: ‘oid_rtl_seg_81_80_20’ defined but not used [-Wunused-const-variable=]
 drivers/staging/rtl8712/rtl871x_mp_ioctl.h:138:34: warning: ‘oid_rtl_seg_81_80_00’ defined but not used [-Wunused-const-variable=]

Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Florian Schilhabel <florian.c.schilhabel@googlemail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: WLAN FAE <wlanfae@realtek.com>
Cc: linux-staging@lists.linux.dev
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210414181129.1628598-13-lee.jones@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes the following W=1 kernel build warning(s):

 drivers/staging/rtl8723bs/core/rtw_mlme.c: In function ‘rtw_build_wmm_ie_ht’:
 drivers/staging/rtl8723bs/core/rtw_mlme.c:2482:6: warning: variable ‘pframe’ set but not used [-Wunused-but-set-variable]
 drivers/staging/rtl8723bs/core/rtw_mlme.c: In function ‘rtw_restructure_ht_ie’:
 drivers/staging/rtl8723bs/core/rtw_mlme.c:2498:21: warning: variable ‘pframe’ set but not used [-Wunused-but-set-variable]
 drivers/staging/rtl8723bs/core/rtw_mlme.c: In function ‘rtw_update_ht_cap’:
 drivers/staging/rtl8723bs/core/rtw_mlme.c:2647:33: warning: variable ‘pht_addtinfo’ set but not used [-Wunused-but-set-variable]
 from drivers/staging/rtl8188eu/core/rtw_mlme.c:12:

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-staging@lists.linux.dev
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210414181129.1628598-11-lee.jones@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes the following W=1 kernel build warning(s):

 from drivers/staging/rtl8188eu/core/rtw_ieee80211.c:11:
 drivers/staging/rtl8188eu/core/rtw_ieee80211.c:778: warning: expecting prototype for ieee802_11_parse_elems(). Prototype was for rtw_ieee802_11_parse_elems() instead

Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-staging@lists.linux.dev
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210414181129.1628598-10-lee.jones@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes the following W=1 kernel build warning(s):

 drivers/staging/wlan-ng/cfg80211.c: In function ‘prism2_scan’:
 drivers/staging/wlan-ng/cfg80211.c:388:1: warning: the frame size of 1296 bytes is larger than 1024 bytes [-Wframe-larger-than=]

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Sumera Priyadarsini <sylphrenadin@gmail.com>
Cc: linux-staging@lists.linux.dev
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210414181129.1628598-8-lee.jones@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes the following W=1 kernel build warning(s):

 drivers/staging/rtl8192u/r819xU_cmdpkt.c: In function ‘cmpk_handle_query_config_rx’:
 drivers/staging/rtl8192u/r819xU_cmdpkt.c:274:24: warning: variable ‘rx_query_cfg’ set but not used [-Wunused-but-set-variable]

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Michael Straube <straube.linux@gmail.com>
Cc: linux-staging@lists.linux.dev
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210414181129.1628598-7-lee.jones@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes the following W=1 kernel build warning(s):

 drivers/staging/rtl8192u/r819xU_phy.c: In function ‘rtl8192_phy_SwChnlStepByStep’:
 drivers/staging/rtl8192u/r819xU_phy.c:1328:1: warning: the frame size of 1096 bytes is larger than 1024 bytes [-Wframe-larger-than=]

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Michael Straube <straube.linux@gmail.com>
Cc: linux-staging@lists.linux.dev
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210414181129.1628598-6-lee.jones@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes the following W=1 kernel build warning(s):

 drivers/staging/rtl8192u/r8192U_core.c:3714: warning: Function parameter or member 'dev' not described in 'UpdateRxPktTimeStamp8190'
 drivers/staging/rtl8192u/r8192U_core.c:3714: warning: Function parameter or member 'stats' not described in 'UpdateRxPktTimeStamp8190'
 drivers/staging/rtl8192u/r8192U_core.c:3714: warning: expecting prototype for Function(). Prototype was for UpdateRxPktTimeStamp8190() instead
 drivers/staging/rtl8192u/r8192U_core.c:4314: warning: Function parameter or member 'dev' not described in 'UpdateReceivedRateHistogramStatistics8190'
 drivers/staging/rtl8192u/r8192U_core.c:4314: warning: Function parameter or member 'stats' not described in 'UpdateReceivedRateHistogramStatistics8190'
 drivers/staging/rtl8192u/r8192U_core.c:4314: warning: expecting prototype for Function(). Prototype was for UpdateReceivedRateHistogramStatistics8190() instead

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Andrea Merello <andrea.merello@gmail.com>
Cc: Jerry chuang <wlanfae@realtek.com>
Cc: linux-staging@lists.linux.dev
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210414181129.1628598-5-lee.jones@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes the following W=1 kernel build warning(s):

 drivers/staging/android/ashmem.c:189: warning: Function parameter or member 'new_range' not described in 'range_alloc'

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Arve Hjønnevåg" <arve@android.com>
Cc: Todd Kjos <tkjos@android.com>
Cc: Martijn Coenen <maco@android.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Christian Brauner <christian@brauner.io>
Cc: Hridya Valsaraju <hridya@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Robert Love <rlove@google.com>
Cc: linux-staging@lists.linux.dev
Acked-by: Todd Kjos <tkjos@google.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210414181129.1628598-3-lee.jones@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes the following W=1 kernel build warning(s):

 drivers/staging/rtl8192u/r8192U_core.c: In function ‘rtl8192_hard_data_xmit’:
 drivers/staging/rtl8192u/r8192U_core.c:905:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Andrea Merello <andrea.merello@gmail.com>
Cc: Jerry chuang <wlanfae@realtek.com>
Cc: linux-staging@lists.linux.dev
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210414181129.1628598-2-lee.jones@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Commit b9d79e4c ("fbmem: Mark proc_fb_seq_ops as __maybe_unused")
places the '__maybe_unused' in an entirely incorrect location between
the "struct" keyword and the structure name.

It's a wonder that gcc accepts that silently, but clang quite reasonably
warns about it:

    drivers/video/fbdev/core/fbmem.c:736:21: warning: attribute declaration must precede definition [-Wignored-attributes]
    static const struct __maybe_unused seq_operations proc_fb_seq_ops = {
                        ^

Fix it.

Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull drm fixes from Dave Airlie:
 "Bit later than usual, I queued them all up on Friday then promptly
  forgot to write the pull request email. This is mainly amdgpu fixes,
  with some radeon/msm/fbdev and one i915 gvt fix thrown in.

  amdgpu:
   - MPO hang workaround
   - Fix for concurrent VM flushes on vega/navi
   - dcefclk is not adjustable on navi1x and newer
   - MST HPD debugfs fix
   - Suspend/resumes fixes
   - Register VGA clients late in case driver fails to load
   - Fix GEM leak in user framebuffer create
   - Add support for polaris12 with 32 bit memory interface
   - Fix duplicate cursor issue when using overlay
   - Fix corruption with tiled surfaces on VCN3
   - Add BO size and stride check to fix BO size verification

  radeon:
   - Fix off-by-one in power state parsing
   - Fix possible memory leak in power state parsing

  msm:
   - NULL ptr dereference fix

  fbdev:
   - procfs disabled warning fix

  i915:
   - gvt: Fix a possible division by zero in vgpu display rate
     calculation"

* tag 'drm-next-2021-05-10' of git://anongit.freedesktop.org/drm/drm:
  drm/amdgpu: Use device specific BO size & stride check.
  drm/amdgpu: Init GFX10_ADDR_CONFIG for VCN v3 in DPG mode.
  drm/amd/pm: initialize variable
  drm/radeon: Avoid power table parsing memory leaks
  drm/radeon: Fix off-by-one power_state index heap overwrite
  drm/amd/display: Fix two cursor duplication when using overlay
  drm/amdgpu: add new MC firmware for Polaris12 32bit ASIC
  fbmem: Mark proc_fb_seq_ops as __maybe_unused
  drm/msm/dpu: Delete bonkers code
  drm/i915/gvt: Prevent divided by zero when calculating refresh rate
  amdgpu: fix GEM obj leak in amdgpu_display_user_framebuffer_create
  drm/amdgpu: Register VGA clients after init can no longer fail
  drm/amdgpu: Handling of amdgpu_device_resume return value for graceful teardown
  drm/amdgpu: fix r initial values
  drm/amd/display: fix wrong statement in mst hpd debugfs
  amdgpu/pm: set pp_dpm_dcefclk to readonly on NAVI10 and newer gpus
  amdgpu/pm: Prevent force of DCEFCLK on NAVI10 and SIENNA_CICHLID
  drm/amdgpu: fix concurrent VM flushes on Vega/Navi v2
  drm/amd/display: Reject non-zero src_y and src_x for video planes

Pull block fix from Jens Axboe:
 "Turns out the bio max size change still has issues, so let's get it
  reverted for 5.13-rc1. We'll shake out the issues there and defer it
  to 5.14 instead"

* tag 'block-5.13-2021-05-09' of git://git.kernel.dk/linux-block:
  Revert "bio: limit bio max size"

Pull cifs fixes from Steve French:
 "Three small SMB3 chmultichannel related changesets (also for stable)
  from the SMB3 test event this week.

  The other fixes are still in review/testing"

* tag '5.13-rc-smb3-part3' of git://git.samba.org/sfrench/cifs-2.6:
  smb3: if max_channels set to more than one channel request multichannel
  smb3: do not attempt multichannel to server which does not support it
  smb3: when mounting with multichannel include it in requested capabilities

Pull scheduler fixes from Thomas Gleixner:
 "A set of scheduler updates:

   - Prevent PSI state corruption when schedule() races with cgroup
     move.

     A recent commit combined two PSI callbacks to reduce the number of
     cgroup tree updates, but missed that schedule() can drop rq::lock
     for load balancing, which opens the race window for
     cgroup_move_task() which then observes half updated state.

     The fix is to solely use task::ps_flags instead of looking at the
     potentially mismatching scheduler state

   - Prevent an out-of-bounds access in uclamp caused bu a rounding
     division which can lead to an off-by-one error exceeding the
     buckets array size.

   - Prevent unfairness caused by missing load decay when a task is
     attached to a cfs runqueue.

     The old load of the task was attached to the runqueue and never
     removed. Fix it by enforcing the load update through the hierarchy
     for unthrottled run queue instances.

   - A documentation fix fot the 'sched_verbose' command line option"

* tag 'sched-urgent-2021-05-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/fair: Fix unfairness caused by missing load decay
  sched: Fix out-of-bound access in uclamp
  psi: Fix psi state corruption when schedule() races with cgroup move
  sched,doc: sched_debug_verbose cmdline should be sched_verbose

Pull locking fixes from Thomas Gleixner:
 "A set of locking related fixes and updates:

   - Two fixes for the futex syscall related to the timeout handling.

     FUTEX_LOCK_PI does not support the FUTEX_CLOCK_REALTIME bit and
     because it's not set the time namespace adjustment for clock
     MONOTONIC is applied wrongly.

     FUTEX_WAIT cannot support the FUTEX_CLOCK_REALTIME bit because its
     always a relative timeout.

   - Cleanups in the futex syscall entry points which became obvious
     when the two timeout handling bugs were fixed.

   - Cleanup of queued_write_lock_slowpath() as suggested by Linus

   - Fixup of the smp_call_function_single_async() prototype"

* tag 'locking-urgent-2021-05-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  futex: Make syscall entry points less convoluted
  futex: Get rid of the val2 conditional dance
  futex: Do not apply time namespace adjustment on FUTEX_LOCK_PI
  Revert 337f1304 ("futex: Allow FUTEX_CLOCK_REALTIME with FUTEX_WAIT op")
  locking/qrwlock: Cleanup queued_write_lock_slowpath()
  smp: Fix smp_call_function_single_async prototype

Pull x86 perf fix from Borislav Petkov:
 "Handle power-gating of AMD IOMMU perf counters properly when they are
  used"

* tag 'perf_urgent_for_v5.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/events/amd/iommu: Fix invalid Perf result due to IOMMU PMC power-gating

Pull x86 fixes from Borislav Petkov:
 "A bunch of things accumulated for x86 in the last two weeks:

   - Fix guest vtime accounting so that ticks happening while the guest
     is running can also be accounted to it. Along with a consolidation
     to the guest-specific context tracking helpers.

   - Provide for the host NMI handler running after a VMX VMEXIT to be
     able to run on the kernel stack correctly.

   - Initialize MSR_TSC_AUX when RDPID is supported and not RDTSCP (virt
     relevant - real hw supports both)

   - A code generation improvement to TASK_SIZE_MAX through the use of
     alternatives

   - The usual misc and related cleanups and improvements"

* tag 'x86_urgent_for_v5.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  KVM: x86: Consolidate guest enter/exit logic to common helpers
  context_tracking: KVM: Move guest enter/exit wrappers to KVM's domain
  context_tracking: Consolidate guest enter/exit wrappers
  sched/vtime: Move guest enter/exit vtime accounting to vtime.h
  sched/vtime: Move vtime accounting external declarations above inlines
  KVM: x86: Defer vtime accounting 'til after IRQ handling
  context_tracking: Move guest exit vtime accounting to separate helpers
  context_tracking: Move guest exit context tracking to separate helpers
  KVM/VMX: Invoke NMI non-IST entry instead of IST entry
  x86/cpu: Remove write_tsc() and write_rdtscp_aux() wrappers
  x86/cpu: Initialize MSR_TSC_AUX if RDTSCP *or* RDPID is supported
  x86/resctrl: Fix init const confusion
  x86: Delete UD0, UD1 traces
  x86/smpboot: Remove duplicate includes
  x86/cpu: Use alternative to generate the TASK_SIZE_MAX constant