Today the last process to update a semaphore is remembered and
reported in the pid namespace of that process.  If there are processes
in any other pid namespace querying that process id with GETPID the
result will be unusable nonsense as it does not make any
sense in your own pid namespace.

Due to ipc_update_pid I don't think you will be able to get System V
ipc semaphores into a troublesome cache line ping-pong.  Using struct
pids from separate process are not a problem because they do not share
a cache line.  Using struct pid from different threads of the same
process are unlikely to be a problem as the reference count update
can be avoided.

Further linux futexes are a much better tool for the job of mutual
exclusion between processes than System V semaphores.  So I expect
programs that  are performance limited by their interprocess mutual
exclusion primitive will be using futexes.

So while it is possible that enhancing the storage of the last
rocess of a System V semaphore from an integer to a struct pid
will cause a performance regression because of the effect
of frequently updating the pid reference count.  I don't expect
that to happen in practice.

This change updates semctl(..., GETPID, ...) to return the
process id of the last process to update a semphore inthe
pid namespace of the calling process.

Fixes: b488893a ("pid namespaces: changes to show virtual ids to user")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>

Today msg_lspid and msg_lrpid are remembered in the pid namespace of
the creator and the processes that last send or received a sysvipc
message.  If you have processes in multiple pid namespaces that is
just wrong.  The process ids reported will not make the least bit of
sense.

This fix is slightly more susceptible to a performance problem than
the related fix for System V shared memory.  By definition the pids
are updated by msgsnd and msgrcv, the fast path of System V message
queues.  The only concern over the previous implementation is the
incrementing and decrementing of the pid reference count.  As that is
the only difference and multiple updates by of the task_tgid by
threads in the same process have been shown in af_unix sockets to
create a cache line ping-pong between cpus of the same processor.

In this case I don't expect cache lines holding pid reference counts
to ping pong between cpus.  As senders and receivers update different
pids there is a natural separation there.  Further if multiple threads
of the same process either send or receive messages the pid will be
updated to the same value and ipc_update_pid will avoid the reference
count update.

Which means in the common case I expect msg_lspid and msg_lrpid to
remain constant, and reference counts not to be updated when messages
are sent.

In rare cases it may be possible to trigger the issue which was
observed for af_unix sockets, but it will require multiple processes
with multiple threads to be either sending or receiving messages.  It
just does not feel likely that anyone would do that in practice.

This change updates msgctl(..., IPC_STAT, ...) to return msg_lspid and
msg_lrpid in the pid namespace of the process calling stat.

This change also updates cat /proc/sysvipc/msg to return print msg_lspid
and msg_lrpid in the pid namespace of the process that opened the proc
file.

Fixes: b488893a ("pid namespaces: changes to show virtual ids to user")
Reviewed-by: Nagarathnam Muthusamy <nagarathnam.muthusamy@oracle.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>

Today shm_cpid and shm_lpid are remembered in the pid namespace of the
creator and the processes that last touched a sysvipc shared memory
segment.   If you have processes in multiple pid namespaces that
is just wrong, and I don't know how this has been over-looked for
so long.

As only creation and shared memory attach and shared memory detach
update the pids I do not expect there to be a repeat of the issues
when struct pid was attached to each af_unix skb, which in some
notable cases cut the performance in half.  The problem was threads of
the same process updating same struct pid from different cpus causing
the cache line to be highly contended and bounce between cpus.

As creation, attach, and detach are expected to be rare operations for
sysvipc shared memory segments I do not expect that kind of cache line
ping pong to cause probems.  In addition because the pid is at a fixed
location in the structure instead of being dynamic on a skb, the
reference count of the pid does not need to be updated on each
operation if the pid is the same.  This ability to simply skip the pid
reference count changes if the pid is unchanging further reduces the
likelihood of the a cache line holding a pid reference count
ping-ponging between cpus.

Fixes: b488893a ("pid namespaces: changes to show virtual ids to user")
Reviewed-by: Nagarathnam Muthusamy <nagarathnam.muthusamy@oracle.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>

Capture the pid namespace when /proc/sysvipc/msg /proc/sysvipc/shm
and /proc/sysvipc/sem are opened, and make it available through
the new helper ipc_seq_pid_ns.

This makes it possible to report the pids in these files in the
pid namespace of the opener of the files.

Implement ipc_update_pid.  A simple impline helper that will only update
a struct pid pointer if the new value does not equal the old value.  This
removes the need for wordy code sequences like:

	old = object->pid;
	object->pid = new;
	put_pid(old);

and

	old = object->pid;
	if (old != new) {
		object->pid = new;
		put_pid(old);
	}

Allowing the following to be written instead:

	ipc_update_pid(&object->pid, new);

Which is easier to read and ensures that the pid reference count is
not touched the old and the new values are the same.  Not touching
the reference count in this case is important to help avoid issues
like af_unix experienced, where multiple threads of the same
process managed to bounce the struct pid between cpu cache lines,
but updating the pids reference count.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>

The definition IPCMNI is only used in ipc/util.h and ipc/util.c.  So
there is no reason to keep it in a header file that the whole kernel
can see.  Move it into util.h to simplify future maintenance.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>

All of the users are now in ipc/msg.c so make the definition local to
that file to make code maintenance easier.  AKA to prevent rebuilding
the entire kernel when struct msg_queue changes.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>

All of the users are now in ipc/shm.c so make the definition local to
that file to make code maintenance easier.  AKA to prevent rebuilding
the entire kernel when struct shmid_kernel changes.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>

All of the users are now in ipc/sem.c so make the definitions
local to that file to make code maintenance easier.  AKA
to prevent rebuilding the entire kernel when one of these
files is changed.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>

All of the implementations of security hooks that take msg_queue only
access q_perm the struct kern_ipc_perm member.  This means the
dependencies of the msg_queue security hooks can be simplified by
passing the kern_ipc_perm member of msg_queue.

Making this change will allow struct msg_queue to become private to
ipc/msg.c.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>

All of the implementations of security hooks that take shmid_kernel only
access shm_perm the struct kern_ipc_perm member.  This means the
dependencies of the shm security hooks can be simplified by passing
the kern_ipc_perm member of shmid_kernel..

Making this change will allow struct shmid_kernel to become private to ipc/shm.c.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>

All of the implementations of security hooks that take sem_array only
access sem_perm the struct kern_ipc_perm member.  This means the
dependencies of the sem security hooks can be simplified by passing
the kern_ipc_perm member of sem_array.

Making this change will allow struct sem and struct sem_array
to become private to ipc/sem.c.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>

Those pid_* caches are created on demand when a process advances to the new
level of pid namespace. Which means pointers are stable, write only and
thus can be packed into an array instead of spreading them over and using
lists(!) to find them.

Both first and subsequent clone/unshare(CLONE_NEWPID) become faster.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>

Pull x86 Kconfig fixes from Thomas Gleixner:
 "Three patchlets to correct HIGHMEM64G and CMPXCHG64 dependencies in
  Kconfig when CPU selections are explicitely set to M586 or M686"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/Kconfig: Explicitly enumerate i686-class CPUs in Kconfig
  x86/Kconfig: Exclude i586-class CPUs lacking PAE support from the HIGHMEM64G Kconfig group
  x86/Kconfig: Add missing i586-class CPUs to the X86_CMPXCHG64 Kconfig group

Pull perf updates from Thomas Gleixner:
 "Perf tool updates and kprobe fixes:

   - perf_mmap overwrite mode fixes/overhaul, prep work to get 'perf
     top' using it, making it bearable to use it in large core count
     systems such as Knights Landing/Mill Intel systems (Kan Liang)

   - s/390 now uses syscall.tbl, just like x86-64 to generate the
     syscall table id -> string tables used by 'perf trace' (Hendrik
     Brueckner)

   - Use strtoull() instead of home grown function (Andy Shevchenko)

   - Synchronize kernel ABI headers, v4.16-rc1 (Ingo Molnar)

   - Document missing 'perf data --force' option (Sangwon Hong)

   - Add perf vendor JSON metrics for ARM Cortex-A53 Processor (William
     Cohen)

   - Improve error handling and error propagation of ftrace based
     kprobes so failures when installing kprobes are not silently
     ignored and create disfunctional tracepoints"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
  kprobes: Propagate error from disarm_kprobe_ftrace()
  kprobes: Propagate error from arm_kprobe_ftrace()
  Revert "tools include s390: Grab a copy of arch/s390/include/uapi/asm/unistd.h"
  perf s390: Rework system call table creation by using syscall.tbl
  perf s390: Grab a copy of arch/s390/kernel/syscall/syscall.tbl
  tools/headers: Synchronize kernel ABI headers, v4.16-rc1
  perf test: Fix test trace+probe_libc_inet_pton.sh for s390x
  perf data: Document missing --force option
  perf tools: Substitute yet another strtoull()
  perf top: Check the latency of perf_top__mmap_read()
  perf top: Switch default mode to overwrite mode
  perf top: Remove lost events checking
  perf hists browser: Add parameter to disable lost event warning
  perf top: Add overwrite fall back
  perf evsel: Expose the perf_missing_features struct
  perf top: Check per-event overwrite term
  perf mmap: Discard legacy interface for mmap read
  perf test: Update mmap read functions for backward-ring-buffer test
  perf mmap: Introduce perf_mmap__read_event()
  perf mmap: Introduce perf_mmap__read_done()
  ...

Pull irq updates from Thomas Gleixner:
 "A small set of updates mostly for irq chip drivers:

   - MIPS GIC fix for spurious, masked interrupts

   - fix for a subtle IPI bug in GICv3

   - do not probe GICv3 ITSs that are marked as disabled

   - multi-MSI support for GICv2m

   - various small cleanups"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqdomain: Re-use DEFINE_SHOW_ATTRIBUTE() macro
  irqchip/bcm: Remove hashed address printing
  irqchip/gic-v2m: Add PCI Multi-MSI support
  irqchip/gic-v3: Ignore disabled ITS nodes
  irqchip/gic-v3: Use wmb() instead of smb_wmb() in gic_raise_softirq()
  irqchip/gic-v3: Change pr_debug message to pr_devel
  irqchip/mips-gic: Avoid spuriously handling masked interrupts

Pull core fix from Thomas Gleixner:
 "A small fix which adds the missing for_each_cpu_wrap() stub for the UP
  case to avoid build failures"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  cpumask: Make for_each_cpu_wrap() available on UP as well

Pull block fixes from Jens Axboe:

 - NVMe pull request from Keith, with fixes all over the map for nvme.
   From various folks.

 - Classic polling fix, that avoids a latency issue where we still end
   up waiting for an interrupt in some cases. From Nitesh Shetty.

 - Comment typo fix from Minwoo Im.

* tag 'for-linus-20180217' of git://git.kernel.dk/linux-block:
  block: fix a typo in comment of BLK_MQ_POLL_STATS_BKTS
  nvme-rdma: fix sysfs invoked reset_ctrl error flow
  nvmet: Change return code of discard command if not supported
  nvme-pci: Fix timeouts in connecting state
  nvme-pci: Remap CMB SQ entries on every controller reset
  nvme: fix the deadlock in nvme_update_formats
  blk: optimization for classic polling
  nvme: Don't use a stack buffer for keep-alive command
  nvme_fc: cleanup io completion
  nvme_fc: correct abort race condition on resets
  nvme: Fix discard buffer overrun
  nvme: delete NVME_CTRL_LIVE --> NVME_CTRL_CONNECTING transition
  nvme-rdma: use NVME_CTRL_CONNECTING state to mark init process
  nvme: rename NVME_CTRL_RECONNECTING state to NVME_CTRL_CONNECTING

Pull MMC fixes from Ulf Hansson:

 - meson-gx: Revert to earlier tuning process

 - bcm2835: Don't overwrite max frequency unconditionally

* tag 'mmc-v4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: bcm2835: Don't overwrite max frequency unconditionally
  Revert "mmc: meson-gx: include tx phase in the tuning process"

Pull mtd fixes from Boris Brezillon:

 - add missing dependency to NAND_MARVELL Kconfig entry

 - use the appropriate OOB layout in the VF610 driver

* tag 'mtd/fixes-for-4.16-rc2' of git://git.infradead.org/linux-mtd:
  mtd: nand: MTD_NAND_MARVELL should depend on HAS_DMA
  mtd: nand: vf610: set correct ooblayout

Pull powerpc fixes from Michael Ellerman:
 "The main attraction is a fix for a bug in the new drmem code, which
  was causing an oops on boot on some versions of Qemu.

  There's also a fix for XIVE (Power9 interrupt controller) on KVM, as
  well as a few other minor fixes.

  Thanks to: Corentin Labbe, Cyril Bur, Cédric Le Goater, Daniel Black,
  Nathan Fontenot, Nicholas Piggin"

* tag 'powerpc-4.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/pseries: Check for zero filled ibm,dynamic-memory property
  powerpc/pseries: Add empty update_numa_cpu_lookup_table() for NUMA=n
  powerpc/powernv: IMC fix out of bounds memory access at shutdown
  powerpc/xive: Use hw CPU ids when configuring the CPU queues
  powerpc: Expose TSCR via sysfs only on powernv

Pull arm64 fixes from Catalin Marinas:
 "The bulk of this is the pte accessors annotation to READ/WRITE_ONCE
  (we tried to avoid pushing this during the merge window to avoid
  conflicts)

   - Updated the page table accessors to use READ/WRITE_ONCE and prevent
     compiler transformation that could lead to an apparent loss of
     coherency

   - Enabled branch predictor hardening for the Falkor CPU

   - Fix interaction between kpti enabling and KASan causing the
     recursive page table walking to take a significant time

   - Fix some sparse warnings"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: cputype: Silence Sparse warnings
  arm64: mm: Use READ_ONCE/WRITE_ONCE when accessing page tables
  arm64: proc: Set PTE_NG for table entries to avoid traversing them twice
  arm64: Add missing Falkor part number for branch predictor hardening

Pull xen fixes from Juergen Gross:

 - fixes for the Xen pvcalls frontend driver

 - fix for booting Xen pv domains

 - fix for the xenbus driver user interface

* tag 'for-linus-4.16a-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  pvcalls-front: wait for other operations to return when release passive sockets
  pvcalls-front: introduce a per sock_mapping refcount
  x86/xen: Calculate __max_logical_packages on PV domains
  xenbus: track caller request id

Passive sockets can have ongoing operations on them, specifically, we
have two wait_event_interruptable calls in pvcalls_front_accept.

Add two wake_up calls in pvcalls_front_release, then wait for the
potential waiters to return and release the sock_mapping refcount.
Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
Acked-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>

Introduce a per sock_mapping refcount, in addition to the existing
global refcount. Thanks to the sock_mapping refcount, we can safely wait
for it to be 1 in pvcalls_front_release before freeing an active socket,
instead of waiting for the global refcount to be 1.
Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
Acked-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>

The kernel panics on PV domains because native_smp_cpus_done() is
only called for HVM domains.

Calculate __max_logical_packages for PV domains.

Fixes: b4c0a732 ("x86/smpboot: Fix __max_logical_packages estimate")
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Tested-and-reported-by: Simon Gaiser <simon@invisiblethingslab.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Dou Liyang <douly.fnst@cn.fujitsu.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: xen-devel@lists.xenproject.org
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>

Commit fd8aa909 ("xen: optimize xenbus driver for multiple concurrent
xenstore accesses") optimized xenbus concurrent accesses but in doing so
broke UABI of /dev/xen/xenbus. Through /dev/xen/xenbus applications are in
charge of xenbus message exchange with the correct header and body. Now,
after the mentioned commit the replies received by application will no
longer have the header req_id echoed back as it was on request (see
specification below for reference), because that particular field is being
overwritten by kernel.

struct xsd_sockmsg
{
  uint32_t type;  /* XS_??? */
  uint32_t req_id;/* Request identifier, echoed in daemon's response.  */
  uint32_t tx_id; /* Transaction id (0 if not related to a transaction). */
  uint32_t len;   /* Length of data following this. */

  /* Generally followed by nul-terminated string(s). */
};

Before there was only one request at a time so req_id could simply be
forwarded back and forth. To allow simultaneous requests we need a
different req_id for each message thus kernel keeps a monotonic increasing
counter for this field and is written on every request irrespective of
userspace value.

Forwarding again the req_id on userspace requests is not a solution because
we would open the possibility of userspace-generated req_id colliding with
kernel ones. So this patch instead takes another route which is to
artificially keep user req_id while keeping the xenbus logic as is. We do
that by saving the original req_id before xs_send(), use the private kernel
counter as req_id and then once reply comes and was validated, we restore
back the original req_id.

Cc: <stable@vger.kernel.org> # 4.11
Fixes: fd8aa909 ("xen: optimize xenbus driver for multiple concurrent xenstore accesses")
Reported-by: Bhavesh Davda <bhavesh.davda@oracle.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>

Sparse makes a fair bit of noise about our MPIDR mask being implicitly
long - let's explicitly describe it as such rather than just relying on
the value forcing automatic promotion.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Pull dma-mapping fixes from Christoph Hellwig:
 "A few dma-mapping fixes for the fallout from the changes in rc1"

* tag 'dma-mapping-4.16-2' of git://git.infradead.org/users/hch/dma-mapping:
  powerpc/macio: set a proper dma_coherent_mask
  dma-mapping: fix a comment typo
  dma-direct: comment the dma_direct_free calling convention
  dma-direct: mark as is_phys
  ia64: fix build failure with CONFIG_SWIOTLB

In many cases, page tables can be accessed concurrently by either another
CPU (due to things like fast gup) or by the hardware page table walker
itself, which may set access/dirty bits. In such cases, it is important
to use READ_ONCE/WRITE_ONCE when accessing page table entries so that
entries cannot be torn, merged or subject to apparent loss of coherence
due to compiler transformations.

Whilst there are some scenarios where this cannot happen (e.g. pinned
kernel mappings for the linear region), the overhead of using READ_ONCE
/WRITE_ONCE everywhere is minimal and makes the code an awful lot easier
to reason about. This patch consistently uses these macros in the arch
code, as well as explicitly namespacing pointers to page table entries
from the entries themselves by using adopting a 'p' suffix for the former
(as is sometimes used elsewhere in the kernel source).
Tested-by: Yury Norov <ynorov@caviumnetworks.com>
Tested-by: Richard Ruigrok <rruigrok@codeaurora.org>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

We get a warning about some slow configurations in randconfig kernels:

  mm/memory.c:83:2: error: #warning Unfortunate NUMA and NUMA Balancing config, growing page-frame for last_cpupid. [-Werror=cpp]

The warning is reasonable by itself, but gets in the way of randconfig
build testing, so I'm hiding it whenever CONFIG_COMPILE_TEST is set.

The warning was added in 2013 in commit 75980e97 ("mm: fold
page->_last_nid into page->flags where possible").

Cc: stable@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull MIPS fixes from James Hogan:
 "A few fixes for outstanding MIPS issues:

   - an __init section mismatch warning when brcmstb_pm is enabled

   - a regression handling multiple mem=X@Y arguments (4.11)

   - a USB Kconfig select warning, and related sparc cleanup (4.16)"

* tag 'mips_fixes_4.16_2' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips:
  sparc,leon: Select USB_UHCI_BIG_ENDIAN_{MMIO,DESC}
  usb: Move USB_UHCI_BIG_ENDIAN_* out of USB_SUPPORT
  MIPS: Fix incorrect mem=X@Y handling
  MIPS: BMIPS: Fix section mismatch warning

Pull btrfs fixes from David Sterba:
 "We have a few assorted fixes, some of them show up during fstests so I
  gave them more testing"

* tag 'for-4.16-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: Fix use-after-free when cleaning up fs_devs with a single stale device
  Btrfs: fix null pointer dereference when replacing missing device
  btrfs: remove spurious WARN_ON(ref->count < 0) in find_parent_nodes
  btrfs: Ignore errors from btrfs_qgroup_trace_extent_post
  Btrfs: fix unexpected -EEXIST when creating new inode
  Btrfs: fix use-after-free on root->orphan_block_rsv
  Btrfs: fix btrfs_evict_inode to handle abnormal inodes correctly
  Btrfs: fix extent state leak from tree log
  Btrfs: fix crash due to not cleaning up tree log block's dirty bits
  Btrfs: fix deadlock in run_delalloc_nocow

Merge tag 'for-4.16/dm-chained-bios-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper fix from Mike Snitzer:
 "Fix for DM core to properly propagate errors (avoids overriding
  non-zero error with 0). This is particularly important given DM core's
  increased use of chained bios"

* tag 'for-4.16/dm-chained-bios-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm: correctly handle chained bios in dec_pending()

Pull x86 platform driver fixes from Andy Shevchenko:

 - regression fix in keyboard support for Dell laptops

 - prevent out-of-boundary write in WMI bus driver

 - increase timeout to read functional key status on Lenovo laptops

* tag 'platform-drivers-x86-v4.16-4' of git://git.infradead.org/linux-platform-drivers-x86:
  platform/x86: dell-laptop: Removed duplicates in DMI whitelist
  platform/x86: dell-laptop: fix kbd_get_state's request value
  platform/x86: ideapad-laptop: Increase timeout to wait for EC answer
  platform/x86: wmi: fix off-by-one write in wmi_dev_probe()

Pull sound fixes from Takashi Iwai:
 "A collection of usual suspects:

   - a handful USB-audio and HD-audio device-specific quirks

   - some trivial fixes for the new AC97 bus stuff

   - another race fix in ALSA sequencer core"

* tag 'sound-4.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda/realtek: PCI quirk for Fujitsu U7x7
  ALSA: seq: Fix racy pool initializations
  ALSA: usb: add more device quirks for USB DSD devices
  ALSA: usb-audio: Fix UAC2 get_ctl request with a RANGE attribute
  ALSA: ac97: Fix copy and paste typo in documentation
  ALSA: usb-audio: add implicit fb quirk for Behringer UFX1204
  ALSA: ac97: kconfig: Remove select of undefined symbol AC97
  ALSA: hda/realtek - Enable Thinkpad Dock device for ALC298 platform
  ALSA: hda/realtek - Add headset mode support for Dell laptop
  ALSA: hda - Fix headset mic detection problem for two Dell machines

Pull drm fixes from Dave Airlie:
 "One nouveau regression fix, one AMD quirk and a full set of i915
  fixes.

  The i915 fixes are mostly for things caught by their CI system, main
  ones being DSI panel fixes and GEM fixes"

* tag 'drm-fixes-for-v4.16-rc2' of git://people.freedesktop.org/~airlied/linux:
  drm/nouveau: Make clock gate support conditional
  drm/i915: Fix DSI panels with v1 MIPI sequences without a DEASSERT sequence v3
  drm/i915: Free memdup-ed DSI VBT data structures on driver_unload
  drm/i915: Add intel_bios_cleanup() function
  drm/i915/vlv: Add cdclk workaround for DSI
  drm/i915/gvt: fix one typo of render_mmio trace
  drm/i915/gvt: Support BAR0 8-byte reads/writes
  drm/i915/gvt: add 0xe4f0 into gen9 render list
  drm/i915/pmu: Fix building without CONFIG_PM
  drm/i915/pmu: Fix sleep under atomic in RC6 readout
  drm/i915/pmu: Fix PMU enable vs execlists tasklet race
  drm/i915: Lock out execlist tasklet while peeking inside for busy-stats
  drm/i915/breadcrumbs: Ignore unsubmitted signalers
  drm/i915: Don't wake the device up to check if the engine is asleep
  drm/i915: Avoid truncation before clamping userspace's priority value
  drm/i915/perf: Fix compiler warning for string truncation
  drm/i915/perf: Fix compiler warning for string truncation
  drm/amdgpu: add new device to use atpx quirk

dec_pending() is given an error status (possibly 0) to be recorded
against a bio.  It can be called several times on the one 'struct
dm_io', and it is careful to only assign a non-zero error to
io->status.  However when it then assigned io->status to bio->bi_status,
it is not careful and could overwrite a genuine error status with 0.

This can happen when chained bios are in use.  If a bio is chained
beneath the bio that this dm_io is handling, the child bio might
complete and set bio->bi_status before the dm_io completes.

This has been possible since chained bios were introduced in 3.14, and
has become a lot easier to trigger with commit 18a25da8 ("dm: ensure
bio submission follows a depth-first tree walk") as that commit caused
dm to start using chained bios itself.

A particular failure mode is that if a bio spans an 'error' target and a
working target, the 'error' fragment will complete instantly and set the
->bi_status, and the other fragment will normally complete a little
later, and will clear ->bi_status.

The fix is simply to only assign io_error to bio->bi_status when
io_error is not zero.
Reported-and-tested-by: Milan Broz <gmazyland@gmail.com>
Cc: stable@vger.kernel.org (v3.14+)
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Merge tag 'irqchip-4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent

Pull irqchip updates for 4.16-rc2 from Marc Zyngier

 - A MIPS GIC fix for spurious, masked interrupts
 - A fix for a subtle IPI bug in GICv3
 - Do not probe GICv3 ITSs that are marked as disabled
 - Multi-MSI support for GICv2m
 - Various cleanups

...instead of open coding file operations followed by custom ->open()
callbacks per each attribute.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>