Signed-off-by: Eliot Blennerhassett <eliot@blennerhassett.gen.nz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Only determining if low latency mode is enabled. Failure
indicates adapter has no modes
Signed-off-by: Eliot Blennerhassett <eliot@blennerhassett.gen.nz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Signed-off-by: Eliot Blennerhassett <eliot@blennerhassett.gen.nz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Prevents spewing of useless messages if app keeps trying to
access the card.
Signed-off-by: Eliot Blennerhassett <eliot@blennerhassett.gen.nz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Some cards have a so-called low-latency mode, in which they present
a single multichannel stream with no mixing or samplerate conversion.
In this mode the card can generate an interrupt per internal processing
block (typically 32 or 64 frames)
Signed-off-by: Eliot Blennerhassett <eliot@blennerhassett.gen.nz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Signed-off-by: Eliot Blennerhassett <eliot@blennerhassett.gen.nz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Signed-off-by: Eliot Blennerhassett <eliot@blennerhassett.gen.nz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Signed-off-by: Eliot Blennerhassett <eliot@blennerhassett.gen.nz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Audio cards wth have AVB or BLU Link IO.
Tuner card with DAB receiver
Signed-off-by: Eliot Blennerhassett <eliot@blennerhassett.gen.nz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Signed-off-by: Eliot Blennerhassett <eliot@blennerhassett.gen.nz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

"devc" can't be NULL here so there is no need to check.  Also I removed
the "devc = NULL" assignment because devc is stored on stack so it's
a no-op.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The functions release_and_free_resource() and snd_util_memhdr_free() test
whether their argument is NULL and then return immediately.
Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: es1688_lib: Deletion of an unnecessary check before the function call "release_and_free_resource"

The release_and_free_resource() function tests whether its argument is NULL
and then returns immediately. Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The functions snd_seq_oss_timer_delete() and vunmap() perform also input
parameter validation. Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

New HP machine supported output mute led and input mute led.
ALC286:
GPIO1 to control output mute led.
GPIO5 to control input mute led.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

There are a few duplicated codes handling the mute and mic-mute LEDs
via GPIO pins.  Let's consolidate to single helpers.  Here we
introduced two new fields to alc_spec, gpio_mute_led_mask and
gpio_mic_led_mask, to contain the bit mask to set/clear.  Also,
mute_led_polarity is evaluated as well.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Complete missing parameters, correct wrong reference, and add an explaination
about the differences between the latest specification and our implementation.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The pci_dev_put() function tests whether its argument is NULL and then
returns immediately. Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The release_firmware() function tests whether its argument is NULL and then
return immediately. Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The vfree() function performs also input parameter validation. Thus the test
around the call is not needed.

This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The snd_ac97_resume() function tests whether its argument is NULL and then
returns immediately. Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The functions kfree() and release_firmware() test whether their argument
is NULL and then return immediately. Thus the test around the call
is not needed.

This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

earlier we were ignoring the return value of snd_ak4114_create and
always returning 0.
now we are returning the actual status. revo_init is calling this
function, and revo_init is checking the return value.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

buf_size was initialized with snd_pcm_lib_buffer_bytes,
but never used. and so it is safe to be deleted.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

the functions:
        snd_ice1712_akm4xxx_build_controls
        snd_ice1712_build_pro_mixer
        snd_ctl_add
        snd_ak4114_build
        prodigy192_ak4114_init
        snd_ak4113_build
are all returning either 0 or a negetive error value.
so we can easily remove the check for a negative value and return
the value instead.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Use the inline function instead of directly indexing the array.

This allows some architectures with hardware instructions
for bit reversals to eliminate the array.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This code contains the Scarlett mixer interface code that was originally
written by Tobias Hoffman and Robin Gareus. Because the device doesn't
properly implement UAC2 this code adds a mixer quirk for the device.

Changes from the original code include removing the metering code along with
dead code and comments. Compiler warnings were fixed. The code to initialize
the sampling rate was causing a crash this was fixed as discussed on the
mailing list. Error, and info messages were convered to dev_err and dev_info
interfaces. The custom scarlett_mixer_elem_info struct was replaced with the
more generic usb_mixer_elem_info to be able to recycle more code from mixer.c.

This patch also makes additional modifications based on upstream comments.
Individual control creation functions are removed and a generic
function is no used. Macros for function calls are removed to improve
readability. Hardcoded control initialization is removed. Save to HW
functionality has been removed. Strings for enums are created dynamically for
the mixer. Strings used for controls are now SNDRV_CTL_ELEM_ID_NAME_MAXLEN
length.
Signed-off-by: Chris J Arges <chris.j.arges@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Make the functions set_cur_mix_value and get_cur_mix_value accessible by files
that include mixer.h. In addition make usb_mixer_elem_free accessible.
This allows reuse of these functions by mixers that may require quirks.

The following summarizes the renamed functions:
  - set_cur_mix_value -> snd_usb_set_cur_mix_value
  - get_cur_mix_value -> snd_usb_get_cur_mix_value
  - usb_mixer_elem_free -> snd_usb_mixer_elem_free
Signed-off-by: Chris J Arges <chris.j.arges@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Add a private_data pointer to usb_mixer_elem_info to allow other mixer
implementations to extend the structure as necessary.
Signed-off-by: Chris J Arges <chris.j.arges@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This reverts commit 1762a59d.

This quirk is not needed because support for the Scarlett mixers will be added.
Signed-off-by: Chris J Arges <chris.j.arges@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This patch provides duplex support for the Digidesign Mbox 1 sound
card and has been a work in progress for about a year.
Users have confirmed on my website that previous versions of this patch
have worked on the hardware and I have been testing extensively.

It also enables the mixer control for providing clock source
selector based on the previous patch.
The sample rate has been hardcoded to 48kHz because it works better with
the S/PDIF sync mode when the sample rate is locked.  This is the
highest rate that the device supports and no loss of functionality
is observed by restricting the sample rate apart from the inability to selec
a lower rate.
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This patch provides the infrastructure for the Digidesign Mbox 1
to have a mixer control for selecting the clock source.
Valid options are Internal and S/PDIF external sync.
A non-documented command is sent to the device to enable this feature
found by reverse engineering and bus snooping.
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

They are no real kerneldoc comments, so drop such markers.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Signed-off-by: Takashi Iwai <tiwai@suse.de>

The file isn't processed, but it's not bad to fix beforehand.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The quirk argument itself was used as iterator, so it cannot be taken
back to the original value, obviously.

Fixes: d4b8fc66 ('ALSA: usb-audio: Allow multiple entries for the same iface in composite quirk')
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Fix a copy & paste error:
 Warning(sound/core/pcm_native.c:1112): Excess function parameter 'state' description in 'snd_pcm_stop_xrun'

The state argument was dropped from snd_pcm_stop_xrun().
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Currently the composite quirk doesn't work when multiple entries are
assigned to the same interface because it marks the interface as
claimed then checks whether the interface has been already claimed for
the secondary entry.  But, if you look at the code, you'll notice that
multiple entries are allowed if the entry is the current interface;
i.e. the current behavior is anyway inconsistent, and this is an
unintended shortcoming.

This patch fixes the problem by marking the relevant interfaces as
claimed after applying the all composite entries.  This fix will be
needed for the upcoming enhancements for Digidesign Mbox 1 quirks.
Reviewed-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Add a new helper function snd_pcm_stop_xrun() to the standard sequnce
lock/snd_pcm_stop(XRUN)/unlock by a single call, and replace the
existing open codes with this helper.

The function checks the PCM running state to prevent setting the wrong
state, too, for more safety.
Signed-off-by: Takashi Iwai <tiwai@suse.de>