- 21 Nov, 2017 1 commit
-
-
Ville Syrjälä authored
Add a .get_hw_state() method for planes, returning true or false depending on whether the plane is enabled. Use it to rewrite the plane enabled/disabled asserts in platform agnostic fashion. We do lose the pre-gen4 plane<->pipe mapping checks, but since we're supposed sanitize that anyway it doesn't really matter. v2: Reoder patches to not depend on enum old_plane_id Just call assert_plane_disabled() from assert_planes_disabled() v3: Deal with disabled power wells in .get_hw_state() v4: Rebase due skl primary plane code removal Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Alex Villacís Lasso <alexvillacislasso@hotmail.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> #v2 Tested-by: Thierry Reding <thierry.reding@gmail.com> #v2 Link: https://patchwork.freedesktop.org/patch/msgid/20171117191917.11506-2-ville.syrjala@linux.intel.comSigned-off-by:Ville Syrjälä <ville.syrjala@linux.intel.com>
-
- 20 Nov, 2017 17 commits
-
-
David Weinehall authored
GEN6_RC_VIDEO_FREQ is deprecated for >= gen10; don't try to program it. v2: Use IS_GEN9() instead of INTEL_GEN() and remove comment (Rodrigo) Signed-off-by:
David Weinehall <david.weinehall@linux.intel.com> Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Chris Wilson authored
Silence smatch over drivers/gpu/drm/i915/selftests/intel_guc.c:135 igt_guc_init_doorbell_hw() error: we previously assumed 'guc->execbuf_client' could be null (see line 123) drivers/gpu/drm/i915/selftests/intel_guc.c:142 igt_guc_init_doorbell_hw() error: we previously assumed 'guc->preempt_client' could be null (see line 123) by asserting that we did succeed in creating the pair of clients for testing. References: 55bd6bd7 ("drm/i915/selftests: Add a GuC doorbells selftest") Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Michel Thierry <michel.thierry@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171120211907.1649-1-chris@chris-wilson.co.ukReviewed-by:
Michel Thierry <michel.thierry@intel.com>
-
Chris Wilson authored
Having disabled the broken semaphores on Sandybridge, there is no need for a modparam any more, so remove it in favour of a simple HAS_LEGACY_SEMAPHORES() guard. Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171120205504.21892-5-chris@chris-wilson.co.uk
-
Chris Wilson authored
As the semaphores is just part of the engine, include it with the general pretty printer universally used for debugging. Signed-off-by:
-
Chris Wilson authored
I should have admitted defeat long ago as there has been a rare but persistent error on Sandybridge where semaphore signaling did not propagate to the waiter, leading to a GPU hang. With the work on fence signaling for v4.9, the impact of using CPU driven signaling was greatly reduced wrt to the latency of GPU semaphores, though without logical rings support, the benefit of reordering work to avoid bubbles is not realised (i.e. as it stands fence signaling is just a slower, more costly version of HW semaphores; but works more consistently). As a rough indicator of the difference, with semaphores: Sequential (3 engines, 1 processes): average 5.470us per cycle [expected 4.988us] w/o semaphores: Sequential (3 engines, 1 processes): average 15.771us per cycle [expected 4.923us] In comparison, v3.4: with semaphores: Sequential (3 engines, 1 processes): average 16.066us per cycle [expected 11.842us] w/o semaphores: Sequential (3 engines, 1 processes): average 23.460us per cycle [expected 11.839us] Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=54226 #and 100+ dupes Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by:
-
Chris Wilson authored
Since removing the module parameter to force selection of ringbuffer emission for gen8, the code is defunct. Remove it. To put the difference into perspective, a couple of microbenchmarks (bdw i7-5557u, 20170324): ring execlists exec continuous nops on all rings: 1.491us 2.223us exec sequential nops on each ring: 12.508us 53.682us single nop + sync: 9.272us 30.291us vblank_mode=0 glxgears: ~11000fps ~9000fps Since the earlier submission, gen8 ringbuffer submission has fallen further and further behind in features. So while ringbuffer may hold the throughput crown, in terms of interactive latency, execlists is much better. Alas, we have no convenient metrics for such, other than demonstrating things we can do with execlists but can not using legacy ringbuffer submission. We have made a few improvements to lowlevel execlists throughput, and ringbuffer currently panics on boot! (bdw i7-5557u, 20171026): ring execlists exec continuous nops on all rings: n/a 1.921us exec sequential nops on each ring: n/a 44.621us single nop + sync: n/a 21.953us vblank_mode=0 glxgears: n/a ~18500fps References: https://bugs.freedesktop.org/show_bug.cgi?id=87725Signed-off-by: -
Chris Wilson authored
Execlists and legacy ringbuffer submission are no longer feature comparable (execlists now offer greater functionality that should overcome their performance hit) and obsoletes the unsafe module parameter, i.e. comparing the two modes of execution is no longer useful, so remove the debug tool. Signed-off-by:
-
Michel Thierry authored
The hardware needs some time to process the information received in the ExecList Submission Port, and expects us to not write anything more until it has 'acknowledged' this new submission by sending an IDLE_ACTIVE or PREEMPTED CSB event. If we do not follow this, the driver could write new data into the ELSP before HW had finishing fetching the previous one, putting us in 'undefined behaviour' space. This seems to be the problem causing the spurious PREEMPTED & COMPLETE events after a COMPLETE like the one below: [] vcs0: sw rd pointer = 2, hw wr pointer = 0, current 'head' = 3. [] vcs0: Execlist CSB[0]: 0x00000018 _ 0x00000007 [] vcs0: Execlist CSB[1]: 0x00000001 _ 0x00000000 [] vcs0: Execlist CSB[2]: 0x00000018 _ 0x00000007 <<< COMPLETE [] vcs0: Execlist CSB[3]: 0x00000012 _ 0x00000007 <<< PREEMPTED & COMPLETE [] vcs0: Execlist CSB[4]: 0x00008002 _ 0x00000006 [] vcs0: Execlist CSB[5]: 0x00000014 _ 0x00000006 The ELSP writes that lead to this CSB sequence show that the HW hadn't started executing the previous execlist (the one with only ctx 0x6) by the time the new one was submitted; this is a bit more clear in the data show in the EXECLIST_STATUS register at the time of the ELSP write. [] vcs0: ELSP[0] = 0x0_0 [execlist1] - status_reg = 0x0_302 [] vcs0: ELSP[1] = 0x6_fedb2119 [execlist0] - status_reg = 0x0_8302 [] vcs0: ELSP[2] = 0x7_fedaf119 [execlist1] - status_reg = 0x0_8308 [] vcs0: ELSP[3] = 0x6_fedb2119 [execlist0] - status_reg = 0x7_8308 Note that having to wait for this ack does not disable lite-restores, although it may reduce their numbers. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102035Signed-off-by:
-
Chris Wilson authored
Make the private array used for stashing test clients static, to silence sparse. References: 55bd6bd7 ("drm/i915/selftests: Add a GuC doorbells selftest") Signed-off-by:
-
Lionel Landwerlin authored
Now that we have this stored in the device info, we can drop it from perf part of the driver. Note that this requires to init perf after we've computed the frequency, hence why we move i915_perf_init() from i915_driver_init_early() to after intel_device_info_runtime_init(). v2: Use div_u64 (Chris) v3: Drop u64 divs by switching to kHz (Chris/Ville) Move i915_perf_fini to i915_driver_cleanup_hw (Matthew) Signed-off-by:Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by:
Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171113181902.12411-2-lionel.g.landwerlin@intel.com
-
Chris Wilson authored
During request construction, after pinning the context we know whether or not we have to emit a context switch. So move this common operation from every caller into i915_gem_request_alloc() itself. v2: Always submit the request if we emitted some commands during request construction, as typically it also involves changes in global state. Signed-off-by:
-
Chris Wilson authored
As the request will, in the following patch, implicitly invoke a context-switch on construction, we should precede that with a GPU TLB invalidation. Also, even before using GGTT, we always want to invalidate the TLBs for any updates (as well as the ppgtt invalidates that are unconditionally applied by execbuf). Since we almost always require the TLB invalidate, do it unconditionally on request allocation and so we can remove it from all other paths. Signed-off-by:
-
Lionel Landwerlin authored
This replaces accesses to the reg field of the i915_reg_t structure with the i915_mmio_reg_offset() inline function. Suggested-by:
Ewelina Musial <ewelina.musial@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171113233455.12085-2-lionel.g.landwerlin@intel.com
-
Chris Wilson authored
If IDLE_ACTIVE is set, then all other bits are invalid. For us, we can assert that if we see a COMPLETE | PREEMPTED event, then it should be impossible for it to also contain an IDLE_ACTIVE flag. Suggested-by:
-
Chris Wilson authored
Since we get a COMPLETE event when the context switch occurs on RING_HEAD == RING_TAIL and a PREEMPTED event when a switch occurs before that point, COMPLETE | PREEMPTED should cover all possible context switch completion events. We can move the ELEMENT_SWITCH info message from the COMPLETED_MASK into an assertion for when we are performing a switch to port[1]. Suggested-by:
-
Chris Wilson authored
Since commit e1fee72c Author: Oscar Mateo <oscar.mateo@intel.com> Date: Thu Jul 24 17:04:40 2014 +0100 drm/i915/bdw: Avoid non-lite-restore preemptions execlists has listened to (ACTIVE_IDLE | ELEMENT_SWITCH) for detecting when one context completed and it either continued onto the next (in port 1) or idled. We would always see COMPLETE | ACTIVE_IDLE on the final context-switch event, but on recent gen it appears that we now get separate ACTIVE_IDLE and COMPLETE events. In particular, the ACTIVE_IDLE events may not be coupled to a context (since it is a general state rather than a specific context completion event). v2: Update the history, execlists did originally start out by listening to the COMPLETE event not ACTIVE_IDLE. v3: Update preempt completion test to also use COMPLETE not ACTIVE_IDLE. References: bspec/12255 References: https://bugs.freedesktop.org/show_bug.cgi?id=103800Signed-off-by:
-
Ville Syrjälä authored
Moving the init_clock_gating() call from intel_modeset_init_hw() to intel_modeset_gem_init() had an unintended effect of not applying some workarounds on resume. This, for example, cause some kind of corruption to appear at the top of my IVB Thinkpad X1 Carbon LVDS screen after hibernation. Fix the problem by explicitly calling init_clock_gating() from the resume path. I really hope this doesn't break something else again. At least the problems reported at https://bugs.freedesktop.org/show_bug.cgi?id=103549 didn't make a comeback, even after a hibernate cycle. v2: Reorder the init_clock_gating vs. modeset_init_hw to match the display reset path (Rodrigo) Cc: stable@vger.kernel.org Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Fixes: 6ac43272 ("drm/i915: Move init_clock_gating() back to where it was") Reviewed-by:
-
- 17 Nov, 2017 12 commits
-
-
Rodrigo Vivi authored
Signed-off-by: -
Chris Wilson authored
Rodrigo gave a persuasive argument for keeping workarounds: that they serve as a good guide for the bring up of the next generation. Not only do workarounds persist into the early revisions, they show where the workarounds were previously added to the code flow and sometimes the old workarounds have an explanation that give insight into their wider implications. Based on his suggestion, document the policy that we want to keep the workarounds from the current generation to guide the next. Older preproduction workarounds we still want to remove to keep the code clean. Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Reviewed-by:
-
Chris Wilson authored
If we can not run the drunk_hole test because we couldn't allocate the memory for the permutation array (even after we tried trimming the size), report a clear ENOMEM. Similary, if we are asked to operate on a hole too small for ourselves, make it skip quietly. v2: Avoid malloc(0) since that returns ZERO_SIZE_PTR not NULL. v3: Fixup similar construction for lowlevel_hole v4: Use u64 >> 1 to avoid 64b div. Signed-off-by:
-
Radhakrishna Sripada authored
This reverts commit 8f067837. HSD says "WA withdrawn. It was causing corruption with some images. WA is not strictly necessary since this bug just causes loss of FBC compression with some sizes and images, but doesn't break anything." Fixes: 8f067837 ("drm/i915: Display WA #1133 WaFbcSkipSegments:cnl, glk") Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by:
-
Maarten Lankhorst authored
The watermarks it should calculate against are the old optimal watermarks. The currently active crtc watermarks are pure fiction, and are invalid in case of a nonblocking modeset, page flip enabling/disabling planes or any other reason. When the crtc is disabled or during a modeset the intermediate watermarks don't need to be programmed separately, and could be directly assigned to the optimal watermarks. CXSR must always be disabled in the intermediate case for modesets, else we get a WARN for vblank wait timeout. Also rename crtc_state to new_crtc_state, to distinguish it from the old state. Signed-off-by:
-
Maarten Lankhorst authored
The watermarks it should calculate against are the old optimal watermarks. The currently active crtc watermarks are pure fiction, and are invalid in case of a nonblocking modeset, page flip enabling/disabling planes or any other reason. When the crtc is disabled or during a modeset the intermediate watermarks don't need to be programmed separately, and could be directly assigned to the optimal watermarks. CXSR must always be disabled in the intermediate case for modesets, else we get a WARN for vblank wait timeout. Also rename crtc_state to new_crtc_state, to distinguish it from the old state. Changes since v1: - Use intel_atomic_get_old_crtc_state. (ville) Changes since v2: - Always unset cxsr during modeset. Signed-off-by:
-
Maarten Lankhorst authored
Changes since v1: - Only pass crtc_state, not crtc. Signed-off-by:
-
Maarten Lankhorst authored
IPS can only be enabled if the primary plane is visible, so first make sure sw state matches hw state by waiting for hw_done. After this pass crtc_state to intel_dp_sink_crc() so that can be used, instead of using legacy pointers. Signed-off-by:
-
Maarten Lankhorst authored
The firmware may have set up the pipe correctly, but the FIFO underrun and CRC interrupts are likely not enabled. This resulted in debugfs_test.read_all_entries failing on haswell, because of a timeout when reading the crc debugfs entry. Solve this by enabling FIFO underrun reporting after the initial fastset, which lets interrupts be generated as expected. Changes since v1: - Always enable CPU FIFO underrun reporting for >GEN2, and handle GEN2 correctly. Changes since v2: - Remove unneeded HAS_DDI, simplify GEN2 case. Changes since v3: - Use intel_crtc_pch_transcoder to determine pch transcoder for underruns. (Ville) - Remove crtc->config dereference in intel_crtc_pch_transcoder. (Ville) Testcase: debugfs_test.read_all_entries Signed-off-by:
-
Chris Wilson authored
Commit 21cc6431 ("drm/i915: Mark the userptr invalidate workqueue as WQ_MEM_RECLAIM") tried to fixup the check_flush_dependency warning for hitting i915_gem_userptr_mn_invalidate_range_start from within the shrinker, but I failed to notice userptr has 2 similarly named workqueues. I marked up i915-userptr-acquire as WQ_MEM_RECLAIM whereas we only wait upon i915-userptr-release from inside the reclaim paths. [62530.869510] workqueue: PF_MEMALLOC task 7983(gem_shrink) is flushing !WQ_MEM_RECLAIM i915-userptr-release: (null) [62530.869515] ------------[ cut here ]------------ [62530.869519] WARNING: CPU: 1 PID: 7983 at kernel/workqueue.c:2434 check_flush_dependency+0x7f/0x110 [62530.869519] Modules linked in: pegasus mii ip6table_filter ip6_tables bnep iptable_filter snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic binfmt_misc nls_iso8859_1 intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp snd_hda_intel snd_hda_codec kvm_intel snd_hda_core snd_hwdep kvm snd_pcm irqbypass snd_seq_midi snd_seq_midi_event snd_rawmidi crct10dif_pclmul crc32_pclmul 8250_dw ghash_clmulni_intel snd_seq pcbc snd_seq_device snd_timer btusb aesni_intel btrtl btbcm aes_x86_64 iwlwifi btintel crypto_simd glue_helper cryptd bluetooth snd intel_cstate input_leds idma64 intel_rapl_perf ecdh_generic serio_raw soundcore cfg80211 wmi_bmof virt_dma intel_lpss_pci intel_lpss acpi_als kfifo_buf industrialio winbond_cir soc_button_array rc_core spidev tpm_crb intel_hid acpi_pad mac_hid sparse_keymap [62530.869546] parport_pc ppdev lp parport ip_tables x_tables autofs4 hid_generic usbhid i915 i2c_algo_bit prime_numbers drm_kms_helper syscopyarea e1000e sysfillrect sysimgblt fb_sys_fops ahci ptp pps_core libahci drm wmi video i2c_hid hid [62530.869557] CPU: 1 PID: 7983 Comm: gem_shrink Tainted: G U W L 4.14.0-rc8-drm-tip-ww45-commit-1342299+ #1 [62530.869558] Hardware name: Intel Corporation CoffeeLake Client Platform/CoffeeLake H DDR4 RVP, BIOS CNLSFWR1.R00.X098.A00.1707301945 07/30/2017 [62530.869559] task: ffffa1049dbeec80 task.stack: ffffae7d05c44000 [62530.869560] RIP: 0010:check_flush_dependency+0x7f/0x110 [62530.869561] RSP: 0018:ffffae7d05c473a0 EFLAGS: 00010286 [62530.869562] RAX: 000000000000006e RBX: ffffa1049540f400 RCX: ffffffffa3e55788 [62530.869562] RDX: 0000000000000000 RSI: 0000000000000092 RDI: 0000000000000202 [62530.869563] RBP: ffffae7d05c473c0 R08: 000000000000006e R09: 000000000038bb0e [62530.869563] R10: 0000000000000000 R11: 000000000000006e R12: ffffa1049dbeec80 [62530.869564] R13: 0000000000000000 R14: 0000000000000000 R15: ffffae7d05c473e0 [62530.869565] FS: 00007f621b129880(0000) GS:ffffa1050b240000(0000) knlGS:0000000000000000 [62530.869566] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [62530.869566] CR2: 00007f6214400000 CR3: 0000000353a17003 CR4: 00000000003606e0 [62530.869567] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [62530.869567] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [62530.869568] Call Trace: [62530.869570] flush_workqueue+0x115/0x3d0 [62530.869573] ? wake_up_process+0x15/0x20 [62530.869596] i915_gem_userptr_mn_invalidate_range_start+0x12f/0x160 [i915] [62530.869614] ? i915_gem_userptr_mn_invalidate_range_start+0x12f/0x160 [i915] [62530.869616] __mmu_notifier_invalidate_range_start+0x55/0x80 [62530.869618] try_to_unmap_one+0x791/0x8b0 [62530.869620] ? call_rwsem_down_read_failed+0x18/0x30 [62530.869622] rmap_walk_anon+0x10b/0x260 [62530.869624] rmap_walk+0x48/0x60 [62530.869625] try_to_unmap+0x93/0xf0 [62530.869626] ? page_remove_rmap+0x2a0/0x2a0 [62530.869627] ? page_not_mapped+0x20/0x20 [62530.869629] ? page_get_anon_vma+0x90/0x90 [62530.869630] ? invalid_mkclean_vma+0x20/0x20 [62530.869631] migrate_pages+0x946/0xaa0 [62530.869633] ? __ClearPageMovable+0x10/0x10 [62530.869635] ? isolate_freepages_block+0x3c0/0x3c0 [62530.869636] compact_zone+0x22f/0x970 [62530.869638] compact_zone_order+0xa3/0xd0 [62530.869640] try_to_compact_pages+0x1a5/0x2a0 [62530.869641] ? try_to_compact_pages+0x1a5/0x2a0 [62530.869643] __alloc_pages_direct_compact+0x50/0x110 [62530.869644] __alloc_pages_slowpath+0x4da/0xf30 [62530.869646] __alloc_pages_nodemask+0x262/0x280 [62530.869648] alloc_pages_vma+0x165/0x1e0 [62530.869649] shmem_alloc_hugepage+0xd0/0x130 [62530.869651] ? __radix_tree_insert+0x45/0x230 [62530.869652] ? __vm_enough_memory+0x29/0x130 [62530.869654] shmem_alloc_and_acct_page+0x10d/0x1e0 [62530.869655] shmem_getpage_gfp+0x426/0xc00 [62530.869657] shmem_fault+0xa0/0x1e0 [62530.869659] ? file_update_time+0x60/0x110 [62530.869660] __do_fault+0x1e/0xc0 [62530.869661] __handle_mm_fault+0xa35/0x1170 [62530.869662] handle_mm_fault+0xcc/0x1c0 [62530.869664] __do_page_fault+0x262/0x4f0 [62530.869666] do_page_fault+0x2e/0xe0 [62530.869667] page_fault+0x22/0x30 [62530.869668] RIP: 0033:0x404335 [62530.869669] RSP: 002b:00007fff7829e420 EFLAGS: 00010216 [62530.869670] RAX: 00007f6210400000 RBX: 0000000000000004 RCX: 0000000000b80000 [62530.869670] RDX: 0000000000002e01 RSI: 0000000000008000 RDI: 0000000000000004 [62530.869671] RBP: 0000000000000019 R08: 0000000000000002 R09: 0000000000000000 [62530.869671] R10: 0000000000000559 R11: 0000000000000246 R12: 0000000008000000 [62530.869672] R13: 00000000004042f0 R14: 0000000000000004 R15: 000000000000007e [62530.869673] Code: 00 8b b0 18 05 00 00 48 8d 8b b0 00 00 00 48 8d 90 c0 06 00 00 4d 89 f0 48 c7 c7 40 c0 c8 a3 c6 05 68 c5 e8 00 01 e8 c2 68 04 00 <0f> ff 4d 85 ed 74 18 49 8b 45 20 48 8b 70 08 8b 86 00 01 00 00 [62530.869691] ---[ end trace 01e01ad0ff5781f8 ]--- Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103739 Fixes: 21cc6431 ("drm/i915: Mark the userptr invalidate workqueue as WQ_MEM_RECLAIM") Signed-off-by:
-
Chris Wilson authored
We should long past the time of trying to use wait_for() from inside atomic contexts, so add a might_sleep() check to prevent misuse. Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by:
-
Michel Thierry authored
The first test aims to check guc_init_doorbell_hw, changing the existing guc clients and doorbells state before calling it. The second test tries to create as many clients as it is currently possible (currently limited to max number of doorbells) and exercise the doorbell alloc/dealloc code. Since our usage mode require very few clients/doorbells, this code has been exercised very lightly and it's good to have a simple test for it. As reference, this test already helped identify the bug fixed by commit 7f1ea2ac ("drm/i915/guc: Fix doorbell id selection"). v2: Extend number of clients; check for client allocation failure when number of doorbells is exceeded; validate client properties; reuse guc_init_doorbell_hw (Chris). v3: guc_init_doorbell_hw test added per Chris suggestion. v4: Try to explain why guc_init_doorbell_hw exist and comment some details in the subtest. v5: Remove redundant pr_info at the beginning of each subtest (Chris); rebase (s/i915_guc_client/intel_guc_client/). Signed-off-by:
-
- 16 Nov, 2017 10 commits
-
-
https://github.com/intel/gvt-linuxRodrigo Vivi authored
gvt-next-2017-11-16 - CSB HWSP update support (Weinan) - GVT debug helpers, dyndbg and debugfs (Chuanxiao, Shuo) - full virtualized opregion (Xiaolin) - VM health check for sane fallback (Fred) - workload submission code refactor for future enabling (Zhi) - Updated repo URL in MAINTAINERS (Zhenyu) - other many misc fixes Signed-off-by:
-
Rodrigo Vivi authored
Starting on GLK we support HDMI 2.0. So this patch only extend the work Shashank has made to GLK to CNL. v2: The version that compiles :/ v3: Invert order to newer || older platforms check. (Ville). Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by:
-
Rodrigo Vivi authored
I confess I never fully understood that previous calculation, so this is not a "fix". But let's simplify this math so poor brains like mine can read and make some sense of it in the future. v2: Don't follow the spec since that gives invalid values and it is also confusing. This Ville's version is much simpler. v3: Use u64 cast instead of declaring a u64 dco. (Ville). Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Mika Kahola <mika.kahola@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: James Ausmus <james.ausmus@intel.com> Signed-off-by: -
Rodrigo Vivi authored
Accordingly to spec "If Kdiv != 2, then Qdiv must be 1." but we already handle qdiv values properly and this case here should be spurious. But instead of blindly replacing let's warn loudly instead. Because it means something was really wrong on initial setup. Cc: Mika Kahola <mika.kahola@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: James Ausmus <james.ausmus@intel.com> Signed-off-by:
Manasi Navare <manasi.d.navare@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171114194759.24541-6-rodrigo.vivi@intel.com
-
Rodrigo Vivi authored
Spec describe all values in MHz. We handle our clocks in KHz. This includes the best_dco_centrality that was forgot in the same unity as spec. Consequently we couldn't get a good divider for high frequenies. Hence HDMI 2.0 wasn't working. Spec tells 999999 for initial best_dco_centrality meaning the max value in MHz. Since we convert dco from MHz to KHz we also need to convert this initial best_doc_centrality to 999999000 or 999999999 or even better, to the max that its variable allow. This patch also replaces the use of "* KHz(1)" with the values directly on KHz to avoid future confusion. v2: Use U32_MAX instead of random 99999 as spec tells. (Ville). Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Mika Kahola <mika.kahola@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: James Ausmus <james.ausmus@intel.com> Signed-off-by:
-
Rodrigo Vivi authored
- 64 bits is not needed for afe_clock now we don't convert that to Hz. - 16 bits is not enough for all dco stuff. - unsigned is not relevant/needed for all divisors values. Cc: Mika Kahola <mika.kahola@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: James Ausmus <james.ausmus@intel.com> Signed-off-by:
-
Rodrigo Vivi authored
No functional change. Just starting the wrpll fixes with a clean-up to make units a bit more clear. Cc: Mika Kahola <mika.kahola@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: James Ausmus <james.ausmus@intel.com> Signed-off-by:
-
Rodrigo Vivi authored
"Display software must leave this field at the default value. It no longer needs to be configured as part of PLL programming." We respect this already and we are setting up the default one line below: "DPLL_CFGCR1_CENTRAL_FREQ". Also we don't touch anywhere else this central_freq for cnl. So let's remove from the final write. No functional change. Only a clean-up patch. Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Mika Kahola <mika.kahola@intel.com> Cc: James Ausmus <james.ausmus@intel.com> Signed-off-by:
-
Chris Wilson authored
When operating on the live_ggtt we have to find a usuable hole for our test. It is possible for there to be no hole we can use, so initialise the err to 0 for the early exit. Signed-off-by:
-
Ville Syrjälä authored
Avoid touching PIPECONF in intel_sanitize_crtc() unless the pipe is actually on. Should cure some unclaimed register accesses during reset, as we are rather cavalier in our approach to powerdomain management. We don't have to sanitize this if the pipe is off since we will overwrite the frame start delay anyway when turning the pipe on. v2: Amended commit message to implicate the reset path (Chris) Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102249Signed-off-by:
-
