The code checks whether the skb had one-step TX timestamping enabled, in
order to schedule the work item for emptying the priv->tx_skbs queue.

That code checks for "tx_swbd->skb" directly, when we already had a skb
retrieved using enetc_tx_swbd_get_skb(tx_swbd) - a TX software BD can
also hold an XDP_TX packet or an XDP frame. But since the direct tx_swbd
dereference is in an "if" block guarded by the non-NULL quality of
"skb", accessing "tx_swbd->skb" directly is not wrong, just confusing.

Just use the local variable named "skb".
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The "priv" variable is needed in the "check_writeback" scope since
commit d3982312 ("enetc: add hardware timestamping support").

Since commit 7294380c ("enetc: support PTP Sync packet one-step
timestamping"), we also need "priv" in the larger function scope.

So the local variable from the "if" block scope is not needed, and
actually shadows the other one. Delete it.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Although if_info_size is assigned, it has not been used. And the variable
should also be deleted.

The clang_analyzer complains as follows:

net/core/rtnetlink.c:3806: warning:

Although the value stored to 'if_info_size' is used in the enclosing
expression, the value is never actually read from 'if_info_size'.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: luo penghao <luo.penghao@zte.com.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since the rework, the statistics code always adds up the byte and packet
value(s). On 32bit architectures a seqcount_t is used in
gnet_stats_basic_sync to ensure that the 64bit values are not modified
during the read since two 32bit loads are required. The usage of a
seqcount_t requires a lock to ensure that only one writer is active at a
time. This lock leads to disabled preemption during the update.

The lack of disabling preemption is now creating a warning as reported
by Naresh since the query done by gnet_stats_copy_basic() is in
preemptible context.

For ___gnet_stats_copy_basic() there is no need to disable preemption
since the update is performed on stack and can't be modified by another
writer. Instead of disabling preemption, to avoid the warning,
simply create a read function to just read the values and return as u64.
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Fixes: 67c9e627 ("net: sched: Protect Qdisc::bstats with u64_stats")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Vladimir Oltean says:

====================
Remove the "dsa_to_port in a loop" antipattern

v1->v2: more patches
v2->v3: less patches

As opposed to previous series, I would now like to first refactor the
DSA core, since that sees fewer patches than drivers, and make the
helpers available. Since the refactoring is fairly noisy, I don't want
to force it on driver maintainers right away, patches can be submitted
independently.

The original cover letter is below:

The DSA core and drivers currently iterate too much through the port
list of a switch. For example, this snippet:

	for (port = 0; port < ds->num_ports; port++) {
		if (!dsa_is_cpu_port(ds, port))
			continue;

		ds->ops->change_tag_protocol(ds, port, tag_ops->proto);
	}

iterates through ds->num_ports once, and then calls dsa_is_cpu_port to
filter out the other types of ports. But that function has a hidden call
to dsa_to_port() in it, which contains:

	list_for_each_entry(dp, &dst->ports, list)
		if (dp->ds == ds && dp->index == p)
			return dp;

where the only thing we wanted to know in the first place was whether
dp->type == DSA_PORT_TYPE_CPU or not.

So it seems that the problem is that we are not iterating with the right
variable. We have an "int port" but in fact need a "struct dsa_port *dp".

This has started being an issue since this patch series:
https://patchwork.ozlabs.org/project/netdev/cover/20191020031941.3805884-1-vivien.didelot@gmail.com/

The currently proposed set of changes iterates like this:

	dsa_switch_for_each_cpu_port(cpu_dp, ds)
		err = ds->ops->change_tag_protocol(ds, cpu_dp->index,
						   tag_ops->proto);

which iterates directly over ds->dst->ports, which is a list of struct
dsa_port *dp. This makes it much easier and more efficient to check
dp->type.

As a nice side effect, with the proposed driver API, driver writers are
now encouraged to use more efficient patterns, and not only due to less
iterations through the port list. For example, something like this:

	for (port = 0; port < ds->num_ports; port++)
		do_something();

probably does not need to do_something() for the ports that are disabled
in the device tree. But adding extra code for that would look like this:

	for (port = 0; port < ds->num_ports; port++) {
		if (!dsa_is_unused_port(ds, port))
			continue;

		do_something();
	}

and therefore, it is understandable that some driver writers may decide
to not bother. This patch series introduces a "dsa_switch_for_each_available_port"
macro which comes at no extra cost in terms of lines of code / number of
braces to the driver writer, but it has the "dsa_is_unused_port" check
embedded within it.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Pass a single argument to dsa_8021q_rx_vid and dsa_8021q_tx_vid that
contains the necessary information from the two arguments that are
currently provided: the switch and the port number.

Also rename those functions so that they have a dsa_port_* prefix, since
they operate on a struct dsa_port *.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Find the remaining iterators over dst->ports that only filter for the
ports belonging to a certain switch, and replace those with the
dsa_switch_for_each_port helper that we have now.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The majority of cross-chip switch notifiers need to filter in some way
over the type of ports: some install VLANs etc on all cascade ports.

The difference is that the matching function, which filters by port
type, is separate from the function where the iteration happens. So this
patch needs to refactor the matching functions' prototypes as well, to
take the dp as argument.

In a future patch/series, I might convert dsa_towards_port to return a
struct dsa_port *dp too, but at the moment it is a bit entangled with
dsa_routing_port which is also used by mv88e6xxx and they both return an
int port. So keep dsa_towards_port the way it is and convert it into a
dp using dsa_to_port.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Find the occurrences of dsa_is_{user,dsa,cpu}_port where a struct
dsa_port *dp was already available in the function scope, and replace
them with the dsa_port_is_{user,dsa,cpu} equivalent function which uses
that dp directly and does not perform another hidden dsa_to_port().
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Find the remaining iterators over dst->ports that only filter for the
ports belonging to a certain switch, and replace those with the
dsa_switch_for_each_port helper that we have now.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ever since Vivien's conversion of the ds->ports array into a dst->ports
list, and the introduction of dsa_to_port, iterations through the ports
of a switch became quadratic whenever dsa_to_port was needed.

dsa_to_port can either be called directly, or indirectly through the
dsa_is_{user,cpu,dsa,unused}_port helpers.

Use the newly introduced dsa_switch_for_each_port() iteration macro
that works with the iterator variable being a struct dsa_port *dp
directly, and not an int i. It is an expensive variable to go from i to
dp, but cheap to go from dp to i.

This macro iterates through the entire ds->dst->ports list and filters
by the ports belonging just to the switch provided as argument.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since the DSA conversion from the ds->ports array into the dst->ports
list, the DSA API has encouraged driver writers, as well as the core
itself, to write inefficient code.

Currently, code that wants to filter by a specific type of port when
iterating, like {!unused, user, cpu, dsa}, uses the dsa_is_*_port helper.
Under the hood, this uses dsa_to_port which iterates again through
dst->ports. But the driver iterates through the port list already, so
the complexity is quadratic for the typical case of a single-switch
tree.

This patch introduces some iteration helpers where the iterator is
already a struct dsa_port *dp, so that the other variant of the
filtering functions, dsa_port_is_{unused,user,cpu_dsa}, can be used
directly on the iterator. This eliminates the second lookup.

These functions can be used both by the core and by drivers.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Tony Nguyen says:

====================
100GbE Intel Wired LAN Driver Updates 2021-10-20

Sudheer Mogilappagari says:

This series introduces initial support for Application Device Queues(ADQ)
in ice driver. ADQ provides traffic isolation for application flows in
hardware and ability to steer traffic to a given traffic class. This
helps in aligning NIC queues to application threads.

Traffic classes are configured using mqprio framework of tc command
and mapped to HW channels(VSIs) in the driver. The queue set of each
traffic class is managed by corresponding VSI. Each traffic channel
can be configured with bandwidth rate-limiting limits and is offloaded
to the hardware through the mqprio framework by specifying the mode
option as 'channel' and shaper option as 'bw_rlimit'.

Next, the flows of application can be steered into a given traffic class
using "tc filter" command. The option "skip_sw hw_tc x" indicates
hw-offload of filtering and steering filtered traffic into specified TC.
Non-matching traffic flows through TC0.

When channel configuration are removed queue configuration is set to
default and filters configured on individual traffic classes are deleted.

example:
$ ethtool -K eth0 hw-tc-offload on

Configure 3 traffic classes and map priority 0,1,2 to TC0, TC1 and TC2
respectively. TC0 has 2 queues from offset 0 & TC1 has 8 queues from
offset 2 and TC2 has 4 queues from offset 10. Enable hardware offload
of channels.

$ tc qdisc add dev eth0 root mqprio num_tc 3 map 0 1 2 queues \
        2@0 8@2 4@10 hw 1 mode channel

$ tc qdisc show dev eth0
qdisc mqprio 8001: root  tc 2 map 0 1 2 0 0 0 0 0 0 0 0 0 0 0 0 0
             queues:(0:1) (2:9) (10:13)
             mode:channel

Configure two filters to match based on dst ipaddr, dst tcp port and
redirect to TC1 and TC2.
$ tc qdisc add dev eth0 clsact

$ tc filter add dev eth0 protocol ip ingress prio 1 flower\
  dst_ip 192.168.1.1/32 ip_proto tcp dst_port 80\
  skip_sw hw_tc 1
$ tc filter add dev eth0 protocol ip ingress prio 1 flower\
  dst_ip 192.168.1.1/32 ip_proto tcp dst_port 5001\
  skip_sw hw_tc 2

$ tc filter show dev eth0 ingress

Delete traffic classes configuration:
$ sudo tc qdisc del dev eth0 root
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

Now that we have a list of struct ocelot_bridge_vlan entries, we can
rewrite the pvid logic to simply point to one of those structures,
instead of having a separate structure with a "bool valid".
The NULL pointer will represent the lack of a bridge pvid (not to be
confused with the lack of a hardware pvid on the port, that is present
at all times).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ocelot switchdev driver does not include the CPU port in the list of
flooding destinations for unknown traffic, instead that traffic is
supposed to match FDB entries to reach the CPU.

The addresses it installs are:
(a) the station MAC address, in ocelot_probe_port() and later during
    runtime in ocelot_port_set_mac_address(). These are the VLAN-unaware
    addresses. The VLAN-aware addresses are in ocelot_vlan_vid_add().
(b) multicast addresses added with dev_mc_add() (not bridge host MDB
    entries) in ocelot_mc_sync()
(c) multicast destination MAC addresses for MRP in ocelot_mrp_save_mac(),
    to make sure those are dropped (not forwarded) by the bridging
    service, just trapped to the CPU

So we can see that the logic is slightly buggy ever since the initial
commit a556c76a ("net: mscc: Add initial Ocelot switch support").
This is because, when ocelot_probe_port() runs, the port pvid is 0.
Then we join a VLAN-aware bridge, the pvid becomes 1, we call
ocelot_port_set_mac_address(), this learns the new MAC address in VID 1
(also fails to forget the old one, since it thinks it's in VID 1, but
that's not so important). Then when we leave the VLAN-aware bridge,
outside world is unable to ping our new MAC address because it isn't
learned in VID 0, the VLAN-unaware pvid.

[ note: this is strictly based on static analysis, I don't have hardware
  to test. But there are also many more corner cases ]

The basic idea is that we should have a separation of concerns, and the
FDB entries used for standalone operation should be managed by the
driver, and the FDB entries used by the bridging service should be
managed by the bridge. So the standalone and VLAN-unaware bridge FDB
entries should not follow the bridge PVID, because that will only be
active when the bridge is VLAN-aware. So since the port pvid is
coincidentally zero during probe time, just make those entries
statically go to VID 0.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

At present, the ocelot driver accepts a single egress-untagged bridge
VLAN, meaning that this sequence of operations:

ip link add br0 type bridge vlan_filtering 1
ip link set swp0 master br0
bridge vlan add dev swp0 vid 2 pvid untagged

fails because the bridge automatically installs VID 1 as a pvid & untagged
VLAN, and vid 2 would be the second untagged VLAN on this port. It is
necessary to delete VID 1 before proceeding to add VID 2.

This limitation comes from the fact that we operate the port tag, when
it has an egress-untagged VID, in the OCELOT_PORT_TAG_NATIVE mode.
The ocelot switches do not have full flexibility and can either have one
single VID as egress-untagged, or all of them.

There are use cases for having all VLANs as egress-untagged as well, and
this patch adds support for that.

The change rewrites ocelot_port_set_native_vlan() into a more generic
ocelot_port_manage_port_tag() function. Because the software bridge's
state, transmitted to us via switchdev, can become very complex, we
don't attempt to track all possible state transitions, but instead take
a more declarative approach and just make ocelot_port_manage_port_tag()
figure out which more to operate in:

- port is VLAN-unaware: the classified VLAN (internal, unrelated to the
                        802.1Q header) is not inserted into packets on egress
- port is VLAN-aware:
  - port has tagged VLANs:
    -> port has no untagged VLAN: set up as pure trunk
    -> port has one untagged VLAN: set up as trunk port + native VLAN
    -> port has more than one untagged VLAN: this is an invalid config
       which is rejected by ocelot_vlan_prepare
  - port has no tagged VLANs
    -> set up as pure egress-untagged port

We don't keep the number of tagged and untagged VLANs, we just count the
structures we keep.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

First and foremost, the driver currently allocates a constant sized
4K * u32 (16KB memory) array for the VLAN masks. However, a typical
application might not need so many VLANs, so if we dynamically allocate
the memory as needed, we might actually save some space.

Secondly, we'll need to keep more advanced bookkeeping of the VLANs we
have, notably we'll have to check how many untagged and how many tagged
VLANs we have. This will have to stay in a structure, and allocating
another 16 KB array for that is again a bit too much.

So refactor the bridge VLANs in a linked list of structures.

The hook points inside the driver are ocelot_vlan_member_add() and
ocelot_vlan_member_del(), which previously used to operate on the
ocelot->vlan_mask[vid] array element.

ocelot_vlan_member_add() and ocelot_vlan_member_del() used to call
ocelot_vlan_member_set() to commit to the ocelot->vlan_mask.
Additionally, we had two calls to ocelot_vlan_member_set() from outside
those callers, and those were directly from ocelot_vlan_init().
Those calls do not set up bridging service VLANs, instead they:

- clear the VLAN table on reset
- set the port pvid to the value used by this driver for VLAN-unaware
  standalone port operation (VID 0)

So now, when we have a structure which represents actual bridge VLANs,
VID 0 doesn't belong in that structure, since it is not part of the
bridging layer.

So delete the middle man, ocelot_vlan_member_set(), and let
ocelot_vlan_init() call directly ocelot_vlant_set_mask() which forgoes
any data structure and writes directly to hardware, which is all that we
need.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This is a cosmetic patch which clarifies what are the port tagging
options for Ocelot switches.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support to add/delete channel specific filter using tc-flower.
For now, only supported action is "skip_sw hw_tc <tc_num>"

Filter criteria is specific to channel and it can be
combination of L3, L3+L4, L2+L4.

Example:
MATCH criteria       Action
---------------------------
src and/or dest IPv4[6]/mask -> Forward to "hw_tc <tc_num>"
dest IPv4[6]/mask + dest L4 port -> Forward to "hw_tc <tc_num>"
dest MAC + dest L4 port -> Forward to "hw_tc <tc_num>"
src IPv4[6]/mask + src L4 port -> Forward to "hw_tc <tc_num>"
src MAC + src L4 port -> Forward to "hw_tc <tc_num>"

Adding tc-flower filter for channel using "hw_tc"
-------------------------------------------------
tc qdisc add dev <ethX> clsact

Above two steps are only needed the first time when adding
tc-flower filter.

tc filter add dev <ethX> protocol ip ingress prio 1 flower \
     dst_ip 192.168.0.1/32 ip_proto tcp dst_port 5001 \
     skip_sw hw_tc 1

tc filter show dev <ethX> ingress
filter protocol ip pref 1 flower chain 0
filter protocol ip pref 1 flower chain 0 handle 0x1 hw_tc 1
  eth_type ipv4
  ip_proto tcp
  dst_ip 192.168.0.1
  dst_port 5001
  skip_sw
  in_hw in_hw_count 1

Delete specific filter:
-------------------------
tc filter del  dev <ethx> ingress pref 1 handle 0x1 flower

Delete All filters:
------------------
tc filter del dev <ethX> ingress
Co-developed-by: Amritha Nambiar <amritha.nambiar@intel.com>
Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com>
Signed-off-by: Kiran Patil <kiran.patil@intel.com>
Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com>
Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Add support in driver for TC_QDISC_SETUP_MQPRIO. This support
enables instantiation of channels in HW using existing MQPRIO
infrastructure which is extended to be offloadable. This
provides a mechanism to configure dedicated set of queues for
each TC.

Configuring channels using "tc mqprio":
--------------------------------------
tc qdisc add dev <ethX> root mqprio num_tc 3 map 0 1 2 \
	queues 4@0 4@4 4@8  hw 1 mode channel

Above command configures 3 TCs having 4 queues each. "hw 1 mode channel"
implies offload of channel configuration to HW. When driver processes
configuration received via "ndo_setup_tc: QDISC_SETUP_MQPRIO", each
TC maps to HW VSI with specified queues.

User can optionally specify bandwidth min and max rate limit per TC
(see example below). If shaper params like min and/or max bandwidth
rate limit are specified, driver configures VSI specific rate limiter
in HW.

Configuring channels and bandwidth shaper parameters using "tc mqprio":
----------------------------------------------------------------
tc qdisc add dev <ethX> root mqprio \
	num_tc 4 map 0 1 2 3 queues 4@0 4@4 4@8 4@12 hw 1 mode channel \
	shaper bw_rlimit min_rate 1Gbit 2Gbit 3Gbit 4Gbit \
	max_rate 4Gbit 5Gbit 6Gbit 7Gbit

Command to view configured TCs:
-----------------------------
tc qdisc show dev <ethX>

Deleting TCs:
------------
tc qdisc del dev <ethX> root mqprio
Signed-off-by: Kiran Patil <kiran.patil@intel.com>
Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com>
Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com>
Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Add infrastructure required for "ndo_setup_tc:qdisc_mqprio".
ice_vsi_setup is modified to configure traffic classes based
on mqprio data received from the stack. This includes low-level
functions to configure min, max rate-limit parameters in hardware
for traffic classes. Each traffic class gets mapped to a hardware
channel (VSI) which can be individually configured with different
bandwidth parameters.
Co-developed-by: Tarun Singh <tarun.k.singh@intel.com>
Signed-off-by: Tarun Singh <tarun.k.singh@intel.com>
Signed-off-by: Kiran Patil <kiran.patil@intel.com>
Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com>
Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com>
Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Commit e72aeb9e ("fq_codel: implement L4S style ce_threshold_ect1
marking") expanded the ce_threshold feature of FQ-CoDel so it can
be applied to a subset of the traffic, using the ECT(1) bit of the ECN
field as the classifier. However, hard-coding ECT(1) as the only
classifier for this feature seems limiting, so let's expand it to be more
general.

To this end, change the parameter from a ce_threshold_ect1 boolean, to a
one-byte selector/mask pair (ce_threshold_{selector,mask}) which is applied
to the whole diffserv/ECN field in the IP header. This makes it possible to
classify packets by any value in either the ECN field or the diffserv
field. In particular, setting a selector of INET_ECN_ECT_1 and a mask of
INET_ECN_MASK corresponds to the functionality before this patch, and a
mask of ~INET_ECN_MASK allows using the selector as a straight-forward
match against a diffserv code point:

 # apply ce_threshold to ECT(1) traffic
 tc qdisc replace dev eth0 root fq_codel ce_threshold 1ms ce_threshold_selector 0x1/0x3

 # apply ce_threshold to ECN-capable traffic marked as diffserv AF22
 tc qdisc replace dev eth0 root fq_codel ce_threshold 1ms ce_threshold_selector 0x50/0xfc

Regardless of the selector chosen, the normal rules for ECN-marking of
packets still apply, i.e., the flow must still declare itself ECN-capable
by setting one of the bits in the ECN field to get marked at all.

v2:
- Add tc usage examples to patch description
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20211019174709.69081-1-toke@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Some Micrel KSZ8041NL PHY chips exhibit continuous RX errors after using
the power down mode bit (0.11). If the PHY is taken out of power down
mode in a certain temperature range, the PHY enters a weird state which
leads to continuously reporting RX errors. In that state, the MAC is not
able to receive or send any Ethernet frames and the activity LED is
constantly blinking. Since Linux is using the suspend callback when the
interface is taken down, ending up in that state can easily happen
during a normal startup.

Micrel confirmed the issue in errata DS80000700A [*], caused by abnormal
clock recovery when using power down mode. Even the latest revision (A4,
Revision ID 0x1513) seems to suffer that problem, and according to the
errata is not going to be fixed.

Remove the suspend/resume callback to avoid using the power down mode
completely.

[*] https://ww1.microchip.com/downloads/en/DeviceDoc/80000700A.pdf

Fixes: 1a5465f5 ("phy/micrel: Add suspend/resume support to Micrel PHYs")
Signed-off-by: Stefan Agner <stefan@agner.ch>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Coverity complains of a possible dereference of a null return value.

   	5. returned_null: kzalloc returns NULL. [show details]
   	6. var_assigned: Assigning: si_data = NULL return value from kzalloc.
488        si_data = kzalloc(data_size, __GFP_DMA | GFP_KERNEL);
489        cbd.length = cpu_to_le16(data_size);
490
491        dma = dma_map_single(&priv->si->pdev->dev, si_data,
492                             data_size, DMA_FROM_DEVICE);

While this kzalloc() is unlikely to fail, I did notice that the function
returned without unmapping si_data.

Fix this by refactoring the error paths and checking for kzalloc()
failure.

Fixes: 888ae5a3 ("net: enetc: add tc flower psfp offload driver")
Cc: Claudiu Manoil <claudiu.manoil@nxp.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org (open list)
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Acked-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

While loading a driver and changing the number of queues, I noticed this
message in the kernel log:

"[253489.070080] Number of in use tx queues changed invalidating tc
mappings. Priority traffic classification disabled!"

But I had no idea what interface was being talked about because this
message used pr_warn().

After investigating, it appears we can use the netdev_* helpers already
defined to create predictably formatted messages, and that already handle
<unknown netdev> cases, in more of the messages in dev.c.

After this change, this message (and others) will look like this:
"[  170.181093] ice 0000:3b:00.0 ens785f0: Number of in use tx queues
changed invalidating tc mappings. Priority traffic classification
disabled!"

One goal here was not to change the message significantly from the
original format so as to not break user's expectations, so I just
changed messages that used pr_* and generally started with %s ==
dev->name.
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 406f42fa ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it got through appropriate helpers.

Convert batman from ether_addr_copy() to eth_hw_addr_set():

  @@
  expression dev, np;
  @@
  - ether_addr_copy(dev->dev_addr, np)
  + eth_hw_addr_set(dev, np)
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 406f42fa ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it got through appropriate helpers.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 406f42fa ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it got through appropriate helpers.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

netdev->dev_addr will be constant soon, make sure
the qualifier is propagated thru batman-adv.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Coverity complains of unsigned compare against 0. There are 2 cases in
this function:

1821        itp = (irq_holdoff * 1000) / p->desc->qman_256_cycles_per_ns;

CID 121131 (#1 of 1): Unsigned compared against 0 (NO_EFFECT)
unsigned_compare: This less-than-zero comparison of an unsigned value is never true. itp < 0U.
1822        if (itp < 0 || itp > 4096) {
1823                max_holdoff = (p->desc->qman_256_cycles_per_ns * 4096) / 1000;
1824                pr_err("irq_holdoff must be between 0..%dus\n", max_holdoff);
1825                return -EINVAL;
1826        }
1827
    	unsigned_compare: This less-than-zero comparison of an unsigned value is never true. irq_threshold < 0U.
1828        if (irq_threshold >= p->dqrr.dqrr_size || irq_threshold < 0) {
1829                pr_err("irq_threshold must be between 0..%d\n",
1830                       p->dqrr.dqrr_size - 1);
1831                return -EINVAL;
1832        }

Fix this by removing the comparisons altogether as they are incorrect. Zero is
a possible value in either case. Also fix a minor comment typo and update the
2 pr_err() calls to use %u formatting as well as be more precise regarding
the exact error.

Fixes: ed1d2143 ("soc: fsl: dpio: add support for irq coalescing per software portal")
Cc: Ioana Ciornei <ioana.ciornei@nxp.com>
Cc: Roy Pledge <Roy.Pledge@nxp.com>
Cc: Li Yang <leoyang.li@nxp.com>
Cc: linux-kernel@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: netdev@vger.kernel.org
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Tidy and organize qca8k setup function from multiple for loop.
Change for loop in bridge leave/join to scan all port and skip cpu port.
No functional change intended.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Tony Nguyen says:

====================
100GbE Intel Wired LAN Driver Updates 2021-10-19

This series contains updates to ice driver only.

Brett implements support for ndo_set_vf_rate allowing for min_tx_rate
and max_tx_rate to be set for a VF.

Jesse updates DIM moderation to improve latency and resolves problems
with reported rate limit and extra software generated interrupts.

Wojciech moves a check for trusted VFs to the correct function,
disables lb_en for switchdev offloads, and refactors ethtool ops due
to differences in support for PF and port representor support.

Cai Huoqing utilizes the helper function devm_add_action_or_reset().

Gustavo A. R. Silva replaces uses of allocation to devm_kcalloc() as
applicable.

Dan Carpenter propagates an error instead of returning success.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Jakub Kicinski says:

====================
ethernet: manual netdev->dev_addr conversions (part 3)

Manual conversions of Ethernet drivers writing directly
to netdev->dev_addr (part 3 out of 3).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 406f42fa ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it got through appropriate helpers.

Read the address into an array on the stack, then call
eth_hw_addr_set().
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 406f42fa ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it got through appropriate helpers.

Read the address into an array on the stack, then call
eth_hw_addr_set().
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 406f42fa ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it got through appropriate helpers.

Read the address into an array on the stack, do the swapping, then
call eth_hw_addr_set().
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 406f42fa ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it got through appropriate helpers.

Break the address up into an array on the stack, then call
eth_hw_addr_set().
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 406f42fa ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it got through appropriate helpers.

Read the address into an array on the stack, then call
eth_hw_addr_set().
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 406f42fa ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it got through appropriate helpers.

Read the address into an array on the stack, then call
eth_hw_addr_set().
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>