- 28 Apr, 2021 2 commits
-
-
Christophe Leroy authored
Return of user_read_access_begin() is tested the wrong way, leading to a SIGSEGV when the user address is valid and likely an Oops when the user address is bad. Fix the test. Fixes: 887f3ceb ("powerpc/signal32: Convert do_setcontext[_tm]() to user access block") Signed-off-by:
Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/a29aadc54c93bcbf069a83615fa102ca0f59c3ae.1619185912.git.christophe.leroy@csgroup.eu
-
Nathan Chancellor authored
Commit 9975f852 ("powerpc/uaccess: Remove calls to __get_user_bad() and __put_user_bad()") switch to BUILD_BUG() in the default case, which leaves x uninitialized. This will not be an issue because the build will be broken in that case but clang does static analysis before it realizes the default case will be done so it warns about x being uninitialized (trimmed for brevity): In file included from mm/mprotect.c:13: In file included from ./include/linux/hugetlb.h:28: In file included from ./include/linux/mempolicy.h:16: ./include/linux/pagemap.h:772:16: warning: variable '__gu_val' is used uninitialized whenever switch default is taken [-Wsometimes-uninitialized] if (unlikely(__get_user(c, uaddr) != 0)) ^~~~~~~~~~~~~~~~~~~~ ./arch/powerpc/include/asm/uaccess.h:266:2: note: expanded from macro '__get_user' __get_user_size_allowed(__gu_val, __gu_addr, __gu_size, __gu_err); \ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./arch/powerpc/include/asm/uaccess.h:235:2: note: expanded from macro '__get_user_size_allowed' default: BUILD_BUG(); \ ^~~~~~~ Commit 5cd29b1f ("powerpc/uaccess: Use asm goto for get_user when compiler supports it") added an initialization for x because of the same reason. Do the same thing here so there is no warning across all versions of clang. Signed-off-by:
Nathan Chancellor <nathan@kernel.org> Acked-by:
-
- 27 Apr, 2021 2 commits
-
-
Vaibhav Jain authored
In case an nvdimm is found to be unarmed during probe then set its NDD_UNARMED flag before nvdimm_create(). This would enforce a read-only access to the ndimm region. Presently even if an nvdimm is unarmed its not marked as read-only on ppc64 guests. The patch updates papr_scm_nvdimm_init() to force query of nvdimm health via __drc_pmem_query_health() and if nvdimm is found to be unarmed then set the nvdimm flag ND_UNARMED for nvdimm_create(). Signed-off-by:
Vaibhav Jain <vaibhav@linux.ibm.com> Reviewed-by:
Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by:
-
Michael Ellerman authored
lkp reported a randconfig failure: In file included from arch/powerpc/include/asm/book3s/64/pkeys.h:6, from arch/powerpc/kvm/book3s_64_mmu_host.c:15: arch/powerpc/include/asm/book3s/64/hash-pkey.h: In function 'hash__vmflag_to_pte_pkey_bits': >> arch/powerpc/include/asm/book3s/64/hash-pkey.h:10:23: error: 'VM_PKEY_BIT0' undeclared 10 | return (((vm_flags & VM_PKEY_BIT0) ? H_PTE_PKEY_BIT0 : 0x0UL) | | ^~~~~~~~~~~~ We added the include of book3s/64/pkeys.h for pte_to_hpte_pkey_bits(), but that header on its own should only be included when PPC_MEM_KEYS=y. Instead include linux/pkeys.h, which brings in the right definitions when PPC_MEM_KEYS=y and also provides empty stubs when PPC_MEM_KEYS=n. Fixes: e4e8bc1d ("powerpc/kvm: Fix PR KVM with KUAP/MEM_KEYS enabled") Cc: stable@vger.kernel.org # v5.11+ Reported-by:kernel test robot <lkp@intel.com> Signed-off-by:
-
- 25 Apr, 2021 1 commit
-
-
Christophe Leroy authored
Modules are now located before kernel, KASAN area has to be extended accordingly. Fixes: 80edc68e ("powerpc/32s: Define a MODULE area below kernel text all the time") Fixes: 9132a2e8 ("powerpc/8xx: Define a MODULE area below kernel text") Signed-off-by:
-
- 23 Apr, 2021 2 commits
-
-
Leonardo Bras authored
As of today, doing iommu_range_alloc() only for !largealloc (npages <= 15) will only be able to use 3/4 of the available pages, given pages on largepool not being available for !largealloc. This could mean some drivers not being able to fully use all the available pages for the DMA window. Add pages on largepool as a last resort for !largealloc, making all pages of the DMA window available. Signed-off-by:
Leonardo Bras <leobras.c@gmail.com> Reviewed-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by:
-
Leonardo Bras authored
Currently both iommu_alloc_coherent() and iommu_free_coherent() align the desired allocation size to PAGE_SIZE, and gets system pages and IOMMU mappings (TCEs) for that value. When IOMMU_PAGE_SIZE < PAGE_SIZE, this behavior may cause unnecessary TCEs to be created for mapping the whole system page. Example: - PAGE_SIZE = 64k, IOMMU_PAGE_SIZE() = 4k - iommu_alloc_coherent() is called for 128 bytes - 1 system page (64k) is allocated - 16 IOMMU pages (16 x 4k) are allocated (16 TCEs used) It would be enough to use a single TCE for this, so 15 TCEs are wasted in the process. Update iommu_*_coherent() to make sure the size alignment happens only for IOMMU_PAGE_SIZE() before calling iommu_alloc() and iommu_free(). Also, on iommu_range_alloc(), replace ALIGN(n, 1 << tbl->it_page_shift) with IOMMU_PAGE_ALIGN(n, tbl), which is easier to read and does the same. Signed-off-by:
-
- 22 Apr, 2021 23 commits
-
-
Colin Ian King authored
There is a spelling mistake in the Kconfig help text. Fix it. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Alexey Kardashevskiy authored
The IOMMU table is divided into pools for concurrent mappings and each pool has a separate spinlock. When taking the ownership of an IOMMU group to pass through a device to a VM, we lock these spinlocks which triggers a false negative warning in lockdep (below). This fixes it by annotating the large pool's spinlock as a nest lock which makes lockdep not complaining when locking nested locks if the nest lock is locked already. === WARNING: possible recursive locking detected 5.11.0-le_syzkaller_a+fstn1 #100 Not tainted -------------------------------------------- qemu-system-ppc/4129 is trying to acquire lock: c0000000119bddb0 (&(p->lock)/1){....}-{2:2}, at: iommu_take_ownership+0xac/0x1e0 but task is already holding lock: c0000000119bdd30 (&(p->lock)/1){....}-{2:2}, at: iommu_take_ownership+0xac/0x1e0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(p->lock)/1); lock(&(p->lock)/1); === Signed-off-by: -
Alexey Kardashevskiy authored
Most platforms allocate IOMMU table structures (specifically it_map) at the boot time and when this fails - it is a valid reason for panic(). However the powernv platform allocates it_map after a device is returned to the host OS after being passed through and this happens long after the host OS booted. It is quite possible to trigger the it_map allocation panic() and kill the host even though it is not necessary - the host OS can still use the DMA bypass mode (requires a tiny fraction of it_map's memory) and even if that fails, the host OS is runnnable as it was without the device for which allocating it_map causes the panic. Instead of immediately crashing in a powernv/ioda2 system, this prints an error and continues. All other platforms still call panic(). Signed-off-by:
David Gibson <david@gibson.dropbear.id.au> Reviewed-by:
-
Alexey Kardashevskiy authored
The IOMMU table uses the it_map bitmap to keep track of allocated DMA pages. This has always been a contiguous array allocated at either the boot time or when a passed through device is returned to the host OS. The it_map memory is allocated by alloc_pages() which allocates contiguous physical memory. Such allocation method occasionally creates a problem when there is no big chunk of memory available (no free memory or too fragmented). On powernv/ioda2 the default DMA window requires 16MB for it_map. This replaces alloc_pages_node() with vzalloc_node() which allocates contiguous block but in virtual memory. This should reduce changes of failure but should not cause other behavioral changes as it_map is only used by the kernel's DMA hooks/api when MMU is on. Signed-off-by:
-
Yang Li authored
Eliminate the following coccicheck warning: ./tools/testing/selftests/powerpc/nx-gzip/gzfht_test.c:327:4-5: Unneeded semicolon Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Yang Li <yang.lee@linux.alibaba.com> Signed-off-by:
-
Yang Li authored
Eliminate the following coccicheck warning: ./arch/powerpc/platforms/powernv/setup.c:160:2-3: Unneeded semicolon Reported-by:
-
Yang Li authored
Eliminate the following coccicheck warning: ./arch/powerpc/kernel/eeh.c:782:2-3: Unneeded semicolon Reported-by:
Oliver O'Halloran <oohall@gmail.com> Signed-off-by:
-
Ravi Bangoria authored
ptrace and perf watchpoints can't co-exists if their address range overlaps. See commit 29da4f91 ("powerpc/watchpoint: Don't allow concurrent perf and ptrace events") for more detail. Add selftest for the same. Sample o/p: # ./ptrace-perf-hwbreak test: ptrace-perf-hwbreak tags: git_version:powerpc-5.8-7-118-g937fa174a15d-dirty perf cpu event -> ptrace thread event (Overlapping): Ok perf cpu event -> ptrace thread event (Non-overlapping): Ok perf thread event -> ptrace same thread event (Overlapping): Ok perf thread event -> ptrace same thread event (Non-overlapping): Ok perf thread event -> ptrace other thread event: Ok ptrace thread event -> perf kernel event: Ok ptrace thread event -> perf same thread event (Overlapping): Ok ptrace thread event -> perf same thread event (Non-overlapping): Ok ptrace thread event -> perf other thread event: Ok ptrace thread event -> perf cpu event (Overlapping): Ok ptrace thread event -> perf cpu event (Non-overlapping): Ok ptrace thread event -> perf same thread & cpu event (Overlapping): Ok ptrace thread event -> perf same thread & cpu event (Non-overlapping): Ok ptrace thread event -> perf other thread & cpu event: Ok success: ptrace-perf-hwbreak Signed-off-by:
Ravi Bangoria <ravi.bangoria@linux.ibm.com> Signed-off-by:
-
Ravi Bangoria authored
Extend perf-hwbreak.c selftest to test multiple DAWRs. Also add testcase for testing 512 byte boundary removal. Sample o/p: # ./perf-hwbreak ... TESTED: Process specific, Two events, diff addr TESTED: Process specific, Two events, same addr TESTED: Process specific, Two events, diff addr, one is RO, other is WO TESTED: Process specific, Two events, same addr, one is RO, other is WO TESTED: Systemwide, Two events, diff addr TESTED: Systemwide, Two events, same addr TESTED: Systemwide, Two events, diff addr, one is RO, other is WO TESTED: Systemwide, Two events, same addr, one is RO, other is WO TESTED: Process specific, 512 bytes, unaligned success: perf_hwbreak Signed-off-by:
-
Ravi Bangoria authored
perf-hwbreak selftest opens hw-breakpoint event at multiple places for which it has same code repeated. Coalesce that code into a function. Signed-off-by:
-
Ravi Bangoria authored
Message-ID: <20210412112218.128183-2-ravi.bangoria@linux.ibm.com> (raw) Add selftests to test multiple active DAWRs with ptrace interface. Sample o/p: $ ./ptrace-hwbreak ... PPC_PTRACE_SETHWDEBUG 2, MODE_RANGE, DW ALIGNED, WO, len: 6: Ok PPC_PTRACE_SETHWDEBUG 2, MODE_RANGE, DW UNALIGNED, RO, len: 6: Ok PPC_PTRACE_SETHWDEBUG 2, MODE_RANGE, DAWR Overlap, WO, len: 6: Ok PPC_PTRACE_SETHWDEBUG 2, MODE_RANGE, DAWR Overlap, RO, len: 6: Ok Signed-off-by:
Daniel Axtens <dja@axtens.net> [mpe: Fix build on older distros] Signed-off-by:
-
Michael Ellerman authored
This is an IBM specific driver that we should enable to get some build/boot testing. Signed-off-by:
-
Thadeu Lima de Souza Cascardo authored
Also based on the RFI and entry flush tests, it counts the L1D misses by doing a syscall that does user access: uname, in this case. Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@canonical.com> [dja: forward port, rename function] Signed-off-by:
-
Christophe Leroy authored
AS arch/powerpc/platforms/52xx/lite5200_sleep.o arch/powerpc/platforms/52xx/lite5200_sleep.S: Assembler messages: arch/powerpc/platforms/52xx/lite5200_sleep.S:184: Warning: invalid register expression In the following code, 'addi' is wrong, has to be 'add' /* local udelay in sram is needed */ udelay: /* r11 - tb_ticks_per_usec, r12 - usecs, overwrites r13 */ mullw r12, r12, r11 mftb r13 /* start */ addi r12, r13, r12 /* end */ Fixes: ee983079 ("[POWERPC] MPC5200 low power mode") Signed-off-by:
-
Nicholas Piggin authored
The memory ordering comment no longer applies, because mm_ctx_id is no longer used anywhere. At best always been difficult to follow. It's better to consider the load on which the slbmte depends on, which the MMU depends on before it can start loading TLBs, rather than a store which may or may not have a subsequent dependency chain to the slbmte. So update the comment and we use the load of the mm's user context ID. This is much more analogous the radix ordering too, which is good. Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
-
Athira Rajeev authored
Memory events (mem-loads and mem-stores) currently use the threshold event selection as issue to finish. Power10 supports issue to complete as part of thresholding which is more appropriate for mem-loads and mem-stores. Hence fix the event code for memory events to use issue to complete. Fixes: a64e697c ("powerpc/perf: power10 Performance Monitoring support") Signed-off-by:
Athira Rajeev <atrajeev@linux.vnet.ibm.com> Reviewed-by:
Madhavan Srinivasan <maddy@linux.ibm.com> Signed-off-by:
-
Athira Rajeev authored
Sampled Instruction Event Register (SIER) field [46:48] identifies the sampled instruction type. ISA v3.1 says value of 0b111 for this field as reserved, but in POWER10 it denotes LARX/STCX type which will hopefully be fixed in ISA v3.1 update. Patch fixes the functions to handle type value 7 for CPU_FTR_ARCH_31. Fixes: a64e697c ("powerpc/perf: power10 Performance Monitoring support") Signed-off-by:
-
Christophe Leroy authored
[ 0.000000] ioremap() called early from find_legacy_serial_ports+0x3cc/0x474. Use early_ioremap() instead find_legacy_serial_ports() is called early from setup_arch(), before paging_init(). vmalloc is not available yet, ioremap shouldn't be used that early. Use early_ioremap() and switch to a regular ioremap() later. Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by:
Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by:
-
Christophe Leroy authored
At the time being, the fixmap area is defined at the top of the address space or just below KASAN. This definition is not valid for PPC64. For PPC64, use the top of the I/O space. Because of circular dependencies, it is not possible to include asm/fixmap.h in asm/book3s/64/pgtable.h , so define a fixed size AREA at the top of the I/O space for fixmap and ensure during build that the size is big enough. Fixes: 265c3491 ("powerpc: Add support for GENERIC_EARLY_IOREMAP") Signed-off-by:
-
Randy Dunlap authored
On a kernel config with ALTIVEC=y and PPC_FPU not set/enabled, there are build errors: drivers/cpufreq/pmac32-cpufreq.c:262:2: error: implicit declaration of function 'enable_kernel_fp' [-Werror,-Wimplicit-function-declaration] enable_kernel_fp(); ../arch/powerpc/lib/sstep.c: In function 'do_vec_load': ../arch/powerpc/lib/sstep.c:637:3: error: implicit declaration of function 'put_vr' [-Werror=implicit-function-declaration] 637 | put_vr(rn, &u.v); | ^~~~~~ ../arch/powerpc/lib/sstep.c: In function 'do_vec_store': ../arch/powerpc/lib/sstep.c:660:3: error: implicit declaration of function 'get_vr'; did you mean 'get_oc'? [-Werror=implicit-function-declaration] 660 | get_vr(rn, &u.v); | ^~~~~~ In theory ALTIVEC is independent of PPC_FPU but in practice nobody is going to build such a machine, so make ALTIVEC require PPC_FPU by selecting it. Reported-by:Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
Michael Ellerman authored
FA_DUMP (Firmware Assisted Dump) is a powerpc only feature that should be enabled in our defconfig to get some build / test coverage. Signed-off-by:
-
Michael Ellerman authored
opal_mpipl_query_tag() takes a pointer to a 64-bit value, which firmware writes a value to. As OPAL is traditionally big endian this value will be big endian. This can be confirmed by looking at the implementation in skiboot: static uint64_t opal_mpipl_query_tag(enum opal_mpipl_tags tag, __be64 *tag_val) { ... *tag_val = cpu_to_be64(opal_mpipl_tags[tag]); return OPAL_SUCCESS; } Fix the declaration to annotate that the value is big endian. Signed-off-by: -
Michael Ellerman authored
Sparse says: arch/powerpc/kernel/fadump.c:48:16: warning: symbol 'fadump_kobj' was not declared. Should it be static? arch/powerpc/kernel/fadump.c:55:27: warning: symbol 'crash_mrange_info' was not declared. Should it be static? arch/powerpc/kernel/fadump.c:61:27: warning: symbol 'reserved_mrange_info' was not declared. Should it be static? arch/powerpc/kernel/fadump.c:83:12: warning: symbol 'fadump_cma_init' was not declared. Should it be static? And indeed none of them are used outside this file, they can all be made static. Also fadump_kobj needs to be moved inside the ifdef where it's used. Signed-off-by:
-
- 21 Apr, 2021 10 commits
-
-
Christophe Leroy authored
When probe_kernel_read_inst() was created, there was no good place to put it, so a file called lib/inst.c was dedicated for it. Since then, probe_kernel_read_inst() has been renamed copy_inst_from_kernel_nofault(). And mm/maccess.h didn't exist at that time. Today, mm/maccess.h is related to copy_from_kernel_nofault(). Move copy_inst_from_kernel_nofault() into mm/maccess.c Signed-off-by:
-
Christophe Leroy authored
When probe_kernel_read_inst() was created, it was to mimic probe_kernel_read() function. Since then, probe_kernel_read() has been renamed copy_from_kernel_nofault(). Rename probe_kernel_read_inst() into copy_inst_from_kernel_nofault(). Signed-off-by:
-
Christophe Leroy authored
We have two independant versions of probe_kernel_read_inst(), one for PPC32 and one for PPC64. The PPC32 is identical to the first part of the PPC64 version. The remaining part of PPC64 version is not relevant for PPC32, but not contradictory, so we can easily have a common function with the PPC64 part opted out via a IS_ENABLED(CONFIG_PPC64). The only need is to add a version of ppc_inst_prefix() for PPC32. Signed-off-by:
-
Christophe Leroy authored
Its name comes from former probe_user_read() function. That function is now called copy_from_user_nofault(). probe_user_read_inst() uses copy_from_user_nofault() to read only a few bytes. It is suboptimal. It does the same as get_user_inst() but in addition disables page faults. But on the other hand, it is not used for the time being. So remove it for now. If one day it is really needed, we can give it a new name more in line with today's naming, and implement it using get_user_inst() Signed-off-by:
-
Christophe Leroy authored
If the target of a function call is within 32 Mbytes distance, use a standard function call with 'bl' instead of the 'lis/ori/mtlr/blrl' sequence. In the first pass, no memory has been allocated yet and the code position is not known yet (image pointer is NULL). This pass is there to calculate the amount of memory to allocate for the EBPF code, so assume the 4 instructions sequence is required, so that enough memory is allocated. Signed-off-by:
-
Christophe Leroy authored
Re-implement BPF_ALU64 | BPF_{LSH/RSH/ARSH} | BPF_X with branchless implementation copied from misc_32.S. Signed-off-by: -
Christophe Leroy authored
Replace <<== by <<= Signed-off-by:
-
Christophe Leroy authored
wrtspr() is a function to write an arbitrary value in a special register. It is used on 8xx to write to SPRN_NRI, SPRN_EID and SPRN_EIE. Writing any value to one of those will play with MSR EE and MSR RI regardless of that value. r0 is used many places in the generated code and using r0 for that creates an unnecessary dependency of this instruction with preceding ones using r0 in a few places in vmlinux. r2 is most likely the most stable register as it contains the pointer to 'current'. Using r2 instead of r0 avoids that unnecessary dependency. Signed-off-by:
-
Christophe Leroy authored
On powerpc: - VDSO library is named linux-vdso32.so.1 or linux-vdso64.so.1 - clock_gettime is named __kernel_clock_gettime() Ensure gettime_perf tries these names before giving up. Signed-off-by:
-
Ganesh Goudar authored
When we hit an UE while using machine check safe copy routines, ignore_event flag is set and the event is ignored by mce handler, And the flag is also saved for defered handling and printing of mce event information, But as of now saving of this flag is done on checking if the effective address is provided or physical address is calculated, which is not right. Save ignore_event flag regardless of whether the effective address is provided or physical address is calculated. Without this change following log is seen, when the event is to be ignored. [ 512.971365] MCE: CPU1: machine check (Severe) UE Load/Store [Recovered] [ 512.971509] MCE: CPU1: NIP: [c0000000000b67c0] memcpy+0x40/0x90 [ 512.971655] MCE: CPU1: Initiator CPU [ 512.971739] MCE: CPU1: Unknown [ 512.972209] MCE: CPU1: machine check (Severe) UE Load/Store [Recovered] [ 512.972334] MCE: CPU1: NIP: [c0000000000b6808] memcpy+0x88/0x90 [ 512.972456] MCE: CPU1: Initiator CPU [ 512.972534] MCE: CPU1: Unknown Signed-off-by:
Ganesh Goudar <ganeshgr@linux.ibm.com> Reviewed-by:
Santosh Sivaraj <santosh@fossix.org> Signed-off-by:
-
