LED Select (LED_SEL) bit in the LED General Purpose IO Configuration
register is used to determine the functionality of external LED pins
(Speed Indicator, Link and Activity Indicator, Full Duplex Link
Indicator). The default value for this bit is 0 when no EEPROM is
present. If a EEPROM is present, the default value is the value of the
LED Select bit in the Configuration Flags of the EEPROM. A USB Reset or
Lite Reset (LRST) will cause this bit to be restored to the image value
last loaded from EEPROM, or to be set to 0 if no EEPROM is present.

While configuring the dual purpose GPIO/LED pins to LED outputs in the
LED General Purpose IO Configuration register, the LED_SEL bit is changed
as 0 and resulting the configured value from the EEPROM is cleared. The
issue is fixed by using read-modify-write approach.

Fixes: f293501c ("smsc95xx: configure LED outputs")
Signed-off-by: Parthiban Veerasooran <Parthiban.Veerasooran@microchip.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Woojung Huh <woojung.huh@microchip.com>
Link: https://lore.kernel.org/r/20240523085314.167650-1-Parthiban.Veerasooran@microchip.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

There are two type of classes. "Leaf classes" that are  the
bottom of the class hierarchy. "Inner classes" that are neither
the root class nor leaf classes. QoS rules can only specify leaf
classes as targets for traffic.

			 Root
		        /  \
		       /    \
                      1      2
                             /\
                            /  \
                           4    5
               classes 1,4 and 5 are leaf classes.
               class 2 is a inner class.

When a leaf class made as inner, or vice versa, resources associated
with send queue (send queue buffers and transmit schedulers) are not
getting freed.

Fixes: 5e6808b4 ("octeontx2-pf: Add support for HTB offload")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Link: https://lore.kernel.org/r/20240523073626.4114-1-hkelam@marvell.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

syzkaller reported data-race of sk->sk_hash in unix_autobind() [0],
and the same ones exist in unix_bind_bsd() and unix_bind_abstract().

The three bind() functions prefetch sk->sk_hash locklessly and
use it later after validating that unix_sk(sk)->addr is NULL under
unix_sk(sk)->bindlock.

The prefetched sk->sk_hash is the hash value of unbound socket set
in unix_create1() and does not change until bind() completes.

There could be a chance that sk->sk_hash changes after the lockless
read.  However, in such a case, non-NULL unix_sk(sk)->addr is visible
under unix_sk(sk)->bindlock, and bind() returns -EINVAL without using
the prefetched value.

The KCSAN splat is false-positive, but let's silence it by reading
sk->sk_hash under unix_sk(sk)->bindlock.

[0]:
BUG: KCSAN: data-race in unix_autobind / unix_autobind

write to 0xffff888034a9fb88 of 4 bytes by task 4468 on cpu 0:
 __unix_set_addr_hash net/unix/af_unix.c:331 [inline]
 unix_autobind+0x47a/0x7d0 net/unix/af_unix.c:1185
 unix_dgram_connect+0x7e3/0x890 net/unix/af_unix.c:1373
 __sys_connect_file+0xd7/0xe0 net/socket.c:2048
 __sys_connect+0x114/0x140 net/socket.c:2065
 __do_sys_connect net/socket.c:2075 [inline]
 __se_sys_connect net/socket.c:2072 [inline]
 __x64_sys_connect+0x40/0x50 net/socket.c:2072
 do_syscall_x64 arch/x86/entry/common.c:52 [inline]
 do_syscall_64+0x4f/0x110 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x46/0x4e

read to 0xffff888034a9fb88 of 4 bytes by task 4465 on cpu 1:
 unix_autobind+0x28/0x7d0 net/unix/af_unix.c:1134
 unix_dgram_connect+0x7e3/0x890 net/unix/af_unix.c:1373
 __sys_connect_file+0xd7/0xe0 net/socket.c:2048
 __sys_connect+0x114/0x140 net/socket.c:2065
 __do_sys_connect net/socket.c:2075 [inline]
 __se_sys_connect net/socket.c:2072 [inline]
 __x64_sys_connect+0x40/0x50 net/socket.c:2072
 do_syscall_x64 arch/x86/entry/common.c:52 [inline]
 do_syscall_64+0x4f/0x110 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x46/0x4e

value changed: 0x000000e4 -> 0x000001e3

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 4465 Comm: syz-executor.0 Not tainted 6.8.0-12822-gcd51db110a7e #12
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014

Fixes: afd20b92 ("af_unix: Replace the big lock with small locks.")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20240522154218.78088-1-kuniyu@amazon.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Once unix_sk(sk)->addr is assigned under net->unx.table.locks and
unix_sk(sk)->bindlock, *(unix_sk(sk)->addr) and unix_sk(sk)->path are
fully set up, and unix_sk(sk)->addr is never changed.

unix_getname() and unix_copy_addr() access the two fields locklessly,
and commit ae3b5641 ("missing barriers in some of unix_sock ->addr
and ->path accesses") added smp_store_release() and smp_load_acquire()
pairs.

In other functions, we still read unix_sk(sk)->addr locklessly to check
if the socket is bound, and KCSAN complains about it.  [0]

Given these functions have no dependency for *(unix_sk(sk)->addr) and
unix_sk(sk)->path, READ_ONCE() is enough to annotate the data-race.

Note that it is safe to access unix_sk(sk)->addr locklessly if the socket
is found in the hash table.  For example, the lockless read of otheru->addr
in unix_stream_connect() is safe.

Note also that newu->addr there is of the child socket that is still not
accessible from userspace, and smp_store_release() publishes the address
in case the socket is accept()ed and unix_getname() / unix_copy_addr()
is called.

[0]:
BUG: KCSAN: data-race in unix_bind / unix_listen

write (marked) to 0xffff88805f8d1840 of 8 bytes by task 13723 on cpu 0:
 __unix_set_addr_hash net/unix/af_unix.c:329 [inline]
 unix_bind_bsd net/unix/af_unix.c:1241 [inline]
 unix_bind+0x881/0x1000 net/unix/af_unix.c:1319
 __sys_bind+0x194/0x1e0 net/socket.c:1847
 __do_sys_bind net/socket.c:1858 [inline]
 __se_sys_bind net/socket.c:1856 [inline]
 __x64_sys_bind+0x40/0x50 net/socket.c:1856
 do_syscall_x64 arch/x86/entry/common.c:52 [inline]
 do_syscall_64+0x4f/0x110 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x46/0x4e

read to 0xffff88805f8d1840 of 8 bytes by task 13724 on cpu 1:
 unix_listen+0x72/0x180 net/unix/af_unix.c:734
 __sys_listen+0xdc/0x160 net/socket.c:1881
 __do_sys_listen net/socket.c:1890 [inline]
 __se_sys_listen net/socket.c:1888 [inline]
 __x64_sys_listen+0x2e/0x40 net/socket.c:1888
 do_syscall_x64 arch/x86/entry/common.c:52 [inline]
 do_syscall_64+0x4f/0x110 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x46/0x4e

value changed: 0x0000000000000000 -> 0xffff88807b5b1b40

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 13724 Comm: syz-executor.4 Not tainted 6.8.0-12822-gcd51db110a7e #12
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20240522154002.77857-1-kuniyu@amazon.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

The hsr_ping test reports the following errors:

 INFO: preparing interfaces for HSRv0.
 INFO: Initial validation ping.
 INFO: Longer ping test.
 INFO: Cutting one link.
 INFO: Delay the link and drop a few packages.
 INFO: All good.
 INFO: preparing interfaces for HSRv1.
 RTNETLINK answers: File exists
 RTNETLINK answers: File exists
 RTNETLINK answers: File exists
 RTNETLINK answers: File exists
 RTNETLINK answers: File exists
 RTNETLINK answers: File exists
 Error: ipv4: Address already assigned.
 Error: ipv6: address already assigned.
 Error: ipv4: Address already assigned.
 Error: ipv6: address already assigned.
 Error: ipv4: Address already assigned.
 Error: ipv6: address already assigned.
 INFO: Initial validation ping.

That is because the cleanup code for the 2nd round test before
"setup_hsr_interfaces 1" is removed incorrectly in commit 680fda4f
("test: hsr: Remove script code already implemented in lib.sh").

This patch fixes it by re-setup the namespaces using

	setup_ns ns1 ns2 ns3

command before "setup_hsr_interfaces 1". It deletes previous namespaces
and create new ones.

Fixes: 680fda4f ("test: hsr: Remove script code already implemented in lib.sh")
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/6485d3005f467758d49f0f313c8c009759ba6b05.1716374462.git.tanggeliang@kylinos.cnSigned-off-by: Paolo Abeni <pabeni@redhat.com>

enic_set_vf_port assumes that the nl attribute IFLA_PORT_PROFILE
is of length PORT_PROFILE_MAX and that the nl attributes
IFLA_PORT_INSTANCE_UUID, IFLA_PORT_HOST_UUID are of length PORT_UUID_MAX.
These attributes are validated (in the function do_setlink in rtnetlink.c)
using the nla_policy ifla_port_policy. The policy defines IFLA_PORT_PROFILE
as NLA_STRING, IFLA_PORT_INSTANCE_UUID as NLA_BINARY and
IFLA_PORT_HOST_UUID as NLA_STRING. That means that the length validation
using the policy is for the max size of the attributes and not on exact
size so the length of these attributes might be less than the sizes that
enic_set_vf_port expects. This might cause an out of bands
read access in the memcpys of the data of these
attributes in enic_set_vf_port.

Fixes: f8bd9091 ("net: Add ndo_{set|get}_vf_port support for enic dynamic vnics")
Signed-off-by: Roded Zats <rzats@paloaltonetworks.com>
Link: https://lore.kernel.org/r/20240522073044.33519-1-rzats@paloaltonetworks.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Tariq Toukan says:

====================
mlx5 fixes 24-05-22

This patchset provides bug fixes to mlx5 core and Eth drivers.

Series generated against:
commit 9c91c7fa ("net: mana: Fix the extra HZ in mana_hwc_send_request")
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When the skb is encapsulated, adjust the inner UDP header instead of the
outer one, and account for UDP header (instead of TCP) in the inline
header size calculation.

Fixes: 689adf0d ("net/mlx5e: Add UDP GSO support")
Reported-by: Jason Baron <jbaron@akamai.com>
Closes: https://lore.kernel.org/netdev/c42961cb-50b9-4a9a-bd43-87fe48d88d29@akamai.com/Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Boris Pismenny <borisp@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Previously, the driver incorrectly used rx_dropped to report device
buffer exhaustion.

According to the documentation, rx_dropped should not be used to count
packets dropped due to buffer exhaustion, which is the purpose of
rx_missed_errors.

Use rx_missed_errors as intended for counting packets dropped due to
buffer exhaustion.

Fixes: 269e6b3a ("net/mlx5e: Report additional error statistics in get stats ndo")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ptp channel instance is only initialized when ptp traffic is first
processed by the driver. This means that there is a window in between when
port timestamping is enabled and ptp traffic is sent where the ptp channel
instance is not initialized. Accessing statistics during this window will
lead to an access violation (NULL + member offset). Check the validity of
the instance before attempting to query statistics.

  BUG: unable to handle page fault for address: 0000000000003524
  #PF: supervisor read access in kernel mode
  #PF: error_code(0x0000) - not-present page
  PGD 109dfc067 P4D 109dfc067 PUD 1064ef067 PMD 0
  Oops: 0000 [#1] SMP
  CPU: 0 PID: 420 Comm: ethtool Not tainted 6.9.0-rc2-rrameshbabu+ #245
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS Arch Linux 1.16.3-1-1 04/01/204
  RIP: 0010:mlx5e_stats_ts_get+0x4c/0x130
  <snip>
  Call Trace:
   <TASK>
   ? show_regs+0x60/0x70
   ? __die+0x24/0x70
   ? page_fault_oops+0x15f/0x430
   ? do_user_addr_fault+0x2c9/0x5c0
   ? exc_page_fault+0x63/0x110
   ? asm_exc_page_fault+0x27/0x30
   ? mlx5e_stats_ts_get+0x4c/0x130
   ? mlx5e_stats_ts_get+0x20/0x130
   mlx5e_get_ts_stats+0x15/0x20
  <snip>

Fixes: 3579032c ("net/mlx5e: Implement ethtool hardware timestamping statistics")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove faulty check disabling checksum offload and GSO for offload of
simple IPsec tunnel L4 traffic. Comment previously describing the deleted
code incorrectly claimed the check prevented double tunnel (or three layers
of ip headers).

Fixes: f1267798 ("net/mlx5: Fix checksum issue of VXLAN and IPsec crypto offload")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

rx_create no longer allocates a modify_hdr instance that needs to be
cleaned up. The mlx5_modify_header_dealloc call will lead to a NULL pointer
dereference. A leak in the rules also previously occurred since there are
now two rules populated related to status.

  BUG: kernel NULL pointer dereference, address: 0000000000000000
  #PF: supervisor read access in kernel mode
  #PF: error_code(0x0000) - not-present page
  PGD 109907067 P4D 109907067 PUD 116890067 PMD 0
  Oops: 0000 [#1] SMP
  CPU: 1 PID: 484 Comm: ip Not tainted 6.9.0-rc2-rrameshbabu+ #254
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS Arch Linux 1.16.3-1-1 04/01/2014
  RIP: 0010:mlx5_modify_header_dealloc+0xd/0x70
  <snip>
  Call Trace:
   <TASK>
   ? show_regs+0x60/0x70
   ? __die+0x24/0x70
   ? page_fault_oops+0x15f/0x430
   ? free_to_partial_list.constprop.0+0x79/0x150
   ? do_user_addr_fault+0x2c9/0x5c0
   ? exc_page_fault+0x63/0x110
   ? asm_exc_page_fault+0x27/0x30
   ? mlx5_modify_header_dealloc+0xd/0x70
   rx_create+0x374/0x590
   rx_add_rule+0x3ad/0x500
   ? rx_add_rule+0x3ad/0x500
   ? mlx5_cmd_exec+0x2c/0x40
   ? mlx5_create_ipsec_obj+0xd6/0x200
   mlx5e_accel_ipsec_fs_add_rule+0x31/0xf0
   mlx5e_xfrm_add_state+0x426/0xc00
  <snip>

Fixes: 94af50c0 ("net/mlx5e: Unify esw and normal IPsec status table creation/destruction")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The MTMP register (0x900a) capability offset is off-by-one, move it to
the right place.

Fixes: 1f507e80 ("net/mlx5: Expose NIC temperature via hardware monitoring kernel API")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

A proper query to MPIR needs to set the correct value in the depth field.
On embedded CPU this value is not necessarily zero. As there is no real
use case for multi-PF netdev on the embedded CPU of the smart NIC, block
this option.

This fixes the following failure:
ACCESS_REG(0x805) op_mod(0x1) failed, status bad system state(0x4), syndrome (0x685f19), err(-5)

Fixes: 678eb448 ("net/mlx5: SD, Implement basic query and instantiation")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, the driver does not enforce that lag bond slaves must have
matching roce capabilities. Yet, in mlx5_do_bond(), the driver attempts
to enable roce on all vports of the bond slaves, causing the following
syndrome when one slave has no roce fw support:

mlx5_cmd_out_err:809:(pid 25427): MODIFY_NIC_VPORT_CONTEXT(0×755) op_mod(0×0)
failed, status bad parameter(0×3), syndrome (0xc1f678), err(-22)

Thus, create HW lag only if bond's slaves agree on roce state,
either all slaves have roce support resulting in a roce lag bond,
or none do, resulting in a raw eth bond.

Fixes: 7907f23a ("net/mlx5: Implement RoCE LAG feature")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Following a similar reinstate for the KSZ8081 and KSZ9031.

Older kernels would use the genphy_soft_reset if the PHY did not implement
a .soft_reset.

The KSZ8061 errata described here:
https://ww1.microchip.com/downloads/en/DeviceDoc/KSZ8061-Errata-DS80000688B.pdf
and worked around with 232ba3a5 ("net: phy: Micrel KSZ8061: link failure after cable connect")
is back again without this soft reset.

Fixes: 6e2d85ec ("net: phy: Stop with excessive soft reset")
Tested-by: Karim Ben Houcine <karim.benhoucine@landisgyr.com>
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The implicit conversion from unsigned int to enum
proc_cn_event is invalid, so explicitly cast it
for compilation in a C++ compiler.
/usr/include/linux/cn_proc.h: In function 'proc_cn_event valid_event(proc_cn_event)':
/usr/include/linux/cn_proc.h:72:17: error: invalid conversion from 'unsigned int' to 'proc_cn_event' [-fpermissive]
   72 |         ev_type &= PROC_EVENT_ALL;
      |                 ^
      |                 |
      |                 unsigned int
Signed-off-by: Matt Jan <zoo868e@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull networking fixes from Paolo Abeni:
 "Quite smaller than usual. Notably it includes the fix for the unix
  regression from the past weeks. The TCP window fix will require some
  follow-up, already queued.

  Current release - regressions:

   - af_unix: fix garbage collection of embryos

  Previous releases - regressions:

   - af_unix: fix race between GC and receive path

   - ipv6: sr: fix missing sk_buff release in seg6_input_core

   - tcp: remove 64 KByte limit for initial tp->rcv_wnd value

   - eth: r8169: fix rx hangup

   - eth: lan966x: remove ptp traps in case the ptp is not enabled

   - eth: ixgbe: fix link breakage vs cisco switches

   - eth: ice: prevent ethtool from corrupting the channels

  Previous releases - always broken:

   - openvswitch: set the skbuff pkt_type for proper pmtud support

   - tcp: Fix shift-out-of-bounds in dctcp_update_alpha()

  Misc:

   - a bunch of selftests stabilization patches"

* tag 'net-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (25 commits)
  r8169: Fix possible ring buffer corruption on fragmented Tx packets.
  idpf: Interpret .set_channels() input differently
  ice: Interpret .set_channels() input differently
  nfc: nci: Fix handling of zero-length payload packets in nci_rx_work()
  net: relax socket state check at accept time.
  tcp: remove 64 KByte limit for initial tp->rcv_wnd value
  net: ti: icssg_prueth: Fix NULL pointer dereference in prueth_probe()
  tls: fix missing memory barrier in tls_init
  net: fec: avoid lock evasion when reading pps_enable
  Revert "ixgbe: Manual AN-37 for troublesome link partners for X550 SFI"
  testing: net-drv: use stats64 for testing
  net: mana: Fix the extra HZ in mana_hwc_send_request
  net: lan966x: Remove ptp traps in case the ptp is not enabled.
  openvswitch: Set the skbuff pkt_type for proper pmtud support.
  selftest: af_unix: Make SCM_RIGHTS into OOB data.
  af_unix: Fix garbage collection of embryos carrying OOB with SCM_RIGHTS
  tcp: Fix shift-out-of-bounds in dctcp_update_alpha().
  selftests/net: use tc rule to filter the na packet
  ipv6: sr: fix memleak in seg6_hmac_init_algo
  af_unix: Update unix_sk(sk)->oob_skb under sk_receive_queue lock.
  ...

Pull tracing fixes from Steven Rostedt:
 "Minor last minute fixes:

   - Fix a very tight race between the ring buffer readers and resizing
     the ring buffer

   - Correct some stale comments in the ring buffer code

   - Fix kernel-doc in the rv code

   - Add a MODULE_DESCRIPTION to preemptirq_delay_test"

* tag 'trace-fixes-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  rv: Update rv_en(dis)able_monitor doc to match kernel-doc
  tracing: Add MODULE_DESCRIPTION() to preemptirq_delay_test
  ring-buffer: Fix a race between readers and resize checks
  ring-buffer: Correct stale comments related to non-consuming readers

Pull tracing tool fix from Steven Rostedt:
 "Fix printf format warnings in latency-collector.

  Use the printf format string with %s to take a string instead of
  taking in a string directly"

* tag 'trace-tools-v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tools/latency-collector: Fix -Wformat-security compile warns

Merge tag 'trace-assign-str-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace

Pull tracing cleanup from Steven Rostedt:
 "Remove second argument of __assign_str()

  The __assign_str() macro logic of the TRACE_EVENT() macro was
  optimized so that it no longer needs the second argument. The
  __assign_str() is always matched with __string() field that takes a
  field name and the source for that field:

    __string(field, source)

  The TRACE_EVENT() macro logic will save off the source value and then
  use that value to copy into the ring buffer via the __assign_str().

  Before commit c1fa617c ("tracing: Rework __assign_str() and
  __string() to not duplicate getting the string"), the __assign_str()
  needed the second argument which would perform the same logic as the
  __string() source parameter did. Not only would this add overhead, but
  it was error prone as if the __assign_str() source produced something
  different, it may not have allocated enough for the string in the ring
  buffer (as the __string() source was used to determine how much to
  allocate)

  Now that the __assign_str() just uses the same string that was used in
  __string() it no longer needs the source parameter. It can now be
  removed"

* tag 'trace-assign-str-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tracing/treewide: Remove second parameter of __assign_str()

Merge tag 'sparc-for-6.10-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/alarsson/linux-sparc

Pull sparc updates from Andreas Larsson:

 - Avoid on-stack cpumask variables in a number of places

 - Move struct termio to asm/termios.h, matching other architectures and
   allowing certain user space applications to build also for sparc

 - Fix missing prototype warnings for sparc64

 - Fix version generation warnings for sparc32

 - Fix bug where non-consecutive CPU IDs lead to some CPUs not starting

 - Simplification using swap and cleanup using NULL for pointer

 - Convert sparc parport and chmc drivers to use remove callbacks
   returning void

* tag 'sparc-for-6.10-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/alarsson/linux-sparc:
  sparc/leon: Remove on-stack cpumask var
  sparc/pci_msi: Remove on-stack cpumask var
  sparc/of: Remove on-stack cpumask var
  sparc/irq: Remove on-stack cpumask var
  sparc/srmmu: Remove on-stack cpumask var
  sparc: chmc: Convert to platform remove callback returning void
  sparc: parport: Convert to platform remove callback returning void
  sparc: Compare pointers to NULL instead of 0
  sparc: Use swap() to fix Coccinelle warning
  sparc32: Fix version generation failed warnings
  sparc64: Fix number of online CPUs
  sparc64: Fix prototype warning for sched_clock
  sparc64: Fix prototype warnings in adi_64.c
  sparc64: Fix prototype warning for dma_4v_iotsb_bind
  sparc64: Fix prototype warning for uprobe_trap
  sparc64: Fix prototype warning for alloc_irqstack_bootmem
  sparc64: Fix prototype warning for vmemmap_free
  sparc64: Fix prototype warnings in traps_64.c
  sparc64: Fix prototype warning for init_vdso_image
  sparc: move struct termio to asm/termios.h

Pull arm64 fixes from Will Deacon:
 "The major fix here is for a filesystem corruption issue reported on
  Apple M1 as a result of buggy management of the floating point
  register state introduced in 6.8. I initially reverted one of the
  offending patches, but in the end Ard cooked a proper fix so there's a
  revert+reapply in the series.

  Aside from that, we've got some CPU errata workarounds and misc other
  fixes.

   - Fix broken FP register state tracking which resulted in filesystem
     corruption when dm-crypt is used

   - Workarounds for Arm CPU errata affecting the SSBS Spectre
     mitigation

   - Fix lockdep assertion in DMC620 memory controller PMU driver

   - Fix alignment of BUG table when CONFIG_DEBUG_BUGVERBOSE is
     disabled"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64/fpsimd: Avoid erroneous elide of user state reload
  Reapply "arm64: fpsimd: Implement lazy restore for kernel mode FPSIMD"
  arm64: asm-bug: Add .align 2 to the end of __BUG_ENTRY
  perf/arm-dmc620: Fix lockdep assert in ->event_init()
  Revert "arm64: fpsimd: Implement lazy restore for kernel mode FPSIMD"
  arm64: errata: Add workaround for Arm errata 3194386 and 3312417
  arm64: cputype: Add Neoverse-V3 definitions
  arm64: cputype: Add Cortex-X4 definitions
  arm64: barrier: Restore spec_bar() macro

Pull virtio updates from Michael Tsirkin:
 "Several new features here:

   - virtio-net is finally supported in vduse

   - virtio (balloon and mem) interaction with suspend is improved

   - vhost-scsi now handles signals better/faster

  And fixes, cleanups all over the place"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (48 commits)
  virtio-pci: Check if is_avq is NULL
  virtio: delete vq in vp_find_vqs_msix() when request_irq() fails
  MAINTAINERS: add Eugenio Pérez as reviewer
  vhost-vdpa: Remove usage of the deprecated ida_simple_xx() API
  vp_vdpa: don't allocate unused msix vectors
  sound: virtio: drop owner assignment
  fuse: virtio: drop owner assignment
  scsi: virtio: drop owner assignment
  rpmsg: virtio: drop owner assignment
  nvdimm: virtio_pmem: drop owner assignment
  wifi: mac80211_hwsim: drop owner assignment
  vsock/virtio: drop owner assignment
  net: 9p: virtio: drop owner assignment
  net: virtio: drop owner assignment
  net: caif: virtio: drop owner assignment
  misc: nsm: drop owner assignment
  iommu: virtio: drop owner assignment
  drm/virtio: drop owner assignment
  gpio: virtio: drop owner assignment
  firmware: arm_scmi: virtio: drop owner assignment
  ...

Fix the following -Wformat-security compile warnings adding missing
format arguments:

latency-collector.c: In function ‘show_available’:
latency-collector.c:938:17: warning: format not a string literal and
no format arguments [-Wformat-security]
  938 |                 warnx(no_tracer_msg);
      |                 ^~~~~

latency-collector.c:943:17: warning: format not a string literal and
no format arguments [-Wformat-security]
  943 |                 warnx(no_latency_tr_msg);
      |                 ^~~~~

latency-collector.c: In function ‘find_default_tracer’:
latency-collector.c:986:25: warning: format not a string literal and
no format arguments [-Wformat-security]
  986 |                         errx(EXIT_FAILURE, no_tracer_msg);
      |
                         ^~~~
latency-collector.c: In function ‘scan_arguments’:
latency-collector.c:1881:33: warning: format not a string literal and
no format arguments [-Wformat-security]
 1881 |                                 errx(EXIT_FAILURE, no_tracer_msg);
      |                                 ^~~~

Link: https://lore.kernel.org/linux-trace-kernel/20240404011009.32945-1-skhan@linuxfoundation.org

Cc: stable@vger.kernel.org
Fixes: e23db805 ("tracing/tools: Add the latency-collector to tools directory")
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

An issue was found on the RTL8125b when transmitting small fragmented
packets, whereby invalid entries were inserted into the transmit ring
buffer, subsequently leading to calls to dma_unmap_single() with a null
address.

This was caused by rtl8169_start_xmit() not noticing changes to nr_frags
which may occur when small packets are padded (to work around hardware
quirks) in rtl8169_tso_csum_v2().

To fix this, postpone inspecting nr_frags until after any padding has been
applied.

Fixes: 9020845f ("r8169: improve rtl8169_start_xmit")
Cc: stable@vger.kernel.org
Signed-off-by: Ken Milmore <ken.milmore@gmail.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/27ead18b-c23d-4f49-a020-1fc482c5ac95@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Jacob Keller says:

====================
intel: Interpret .set_channels() input differently

The ice and idpf drivers can trigger a crash with AF_XDP due to incorrect
interpretation of the asymmetric Tx and Rx parameters in their
.set_channels() implementations:

1. ethtool -l <IFNAME> -> combined: 40
2. Attach AF_XDP to queue 30
3. ethtool -L <IFNAME> rx 15 tx 15
   combined number is not specified, so command becomes {rx_count = 15,
   tx_count = 15, combined_count = 40}.
4. ethnl_set_channels checks, if there are any AF_XDP of queues from the
   new (combined_count + rx_count) to the old one, so from 55 to 40, check
   does not trigger.
5. the driver interprets `rx 15 tx 15` as 15 combined channels and deletes
   the queue that AF_XDP is attached to.

This is fundamentally a problem with interpreting a request for asymmetric
queues as symmetric combined queues.

Fix the ice and idpf drivers to stop interpreting such requests as a
request for combined queues. Due to current driver design for both ice and
idpf, it is not possible to support requests of the same count of Tx and Rx
queues with independent interrupts, (i.e. ethtool -L <IFNAME> rx 15 tx 15)
so such requests are now rejected.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
====================

Link: https://lore.kernel.org/r/20240521-iwl-net-2024-05-14-set-channels-fixes-v2-0-7aa39e2e99f1@intel.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Unlike ice, idpf does not check, if user has requested at least 1 combined
channel. Instead, it relies on a check in the core code. Unfortunately, the
check does not trigger for us because of the hacky .set_channels()
interpretation logic that is not consistent with the core code.

This naturally leads to user being able to trigger a crash with an invalid
input. This is how:

1. ethtool -l <IFNAME> -> combined: 40
2. ethtool -L <IFNAME> rx 0 tx 0
   combined number is not specified, so command becomes {rx_count = 0,
   tx_count = 0, combined_count = 40}.
3. ethnl_set_channels checks, if there is at least 1 RX and 1 TX channel,
   comparing (combined_count + rx_count) and (combined_count + tx_count)
   to zero. Obviously, (40 + 0) is greater than zero, so the core code
   deems the input OK.
4. idpf interprets `rx 0 tx 0` as 0 channels and tries to proceed with such
   configuration.

The issue has to be solved fundamentally, as current logic is also known to
cause AF_XDP problems in ice [0].

Interpret the command in a way that is more consistent with ethtool
manual [1] (--show-channels and --set-channels) and new ice logic.

Considering that in the idpf driver only the difference between RX and TX
queues forms dedicated channels, change the correct way to set number of
channels to:

ethtool -L <IFNAME> combined 10 /* For symmetric queues */
ethtool -L <IFNAME> combined 8 tx 2 rx 0 /* For asymmetric queues */

[0] https://lore.kernel.org/netdev/20240418095857.2827-1-larysa.zaremba@intel.com/
[1] https://man7.org/linux/man-pages/man8/ethtool.8.html

Fixes: 02cbfba1 ("idpf: add ethtool callbacks")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Igor Bagnucki <igor.bagnucki@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

A bug occurs because a safety check guarding AF_XDP-related queues in
ethnl_set_channels(), does not trigger. This happens, because kernel and
ice driver interpret the ethtool command differently.

How the bug occurs:
1. ethtool -l <IFNAME> -> combined: 40
2. Attach AF_XDP to queue 30
3. ethtool -L <IFNAME> rx 15 tx 15
   combined number is not specified, so command becomes {rx_count = 15,
   tx_count = 15, combined_count = 40}.
4. ethnl_set_channels checks, if there are any AF_XDP of queues from the
   new (combined_count + rx_count) to the old one, so from 55 to 40, check
   does not trigger.
5. ice interprets `rx 15 tx 15` as 15 combined channels and deletes the
   queue that AF_XDP is attached to.

Interpret the command in a way that is more consistent with ethtool
manual [0] (--show-channels and --set-channels).

Considering that in the ice driver only the difference between RX and TX
queues forms dedicated channels, change the correct way to set number of
channels to:

ethtool -L <IFNAME> combined 10 /* For symmetric queues */
ethtool -L <IFNAME> combined 8 tx 2 rx 0 /* For asymmetric queues */

[0] https://man7.org/linux/man-pages/man8/ethtool.8.html

Fixes: 87324e74 ("ice: Implement ethtool ops for channels")
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

When nci_rx_work() receives a zero-length payload packet, it should not
discard the packet and exit the loop. Instead, it should continue
processing subsequent packets.

Fixes: d24b0353 ("nfc: nci: Fix uninit-value in nci_dev_up and nci_ntf_packet")
Signed-off-by: Ryosuke Yasuoka <ryasuoka@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240521153444.535399-1-ryasuoka@redhat.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Christoph reported the following splat:

WARNING: CPU: 1 PID: 772 at net/ipv4/af_inet.c:761 __inet_accept+0x1f4/0x4a0
Modules linked in:
CPU: 1 PID: 772 Comm: syz-executor510 Not tainted 6.9.0-rc7-g7da7119fe22b #56
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014
RIP: 0010:__inet_accept+0x1f4/0x4a0 net/ipv4/af_inet.c:759
Code: 04 38 84 c0 0f 85 87 00 00 00 41 c7 04 24 03 00 00 00 48 83 c4 10 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc e8 ec b7 da fd <0f> 0b e9 7f fe ff ff e8 e0 b7 da fd 0f 0b e9 fe fe ff ff 89 d9 80
RSP: 0018:ffffc90000c2fc58 EFLAGS: 00010293
RAX: ffffffff836bdd14 RBX: 0000000000000000 RCX: ffff888104668000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: dffffc0000000000 R08: ffffffff836bdb89 R09: fffff52000185f64
R10: dffffc0000000000 R11: fffff52000185f64 R12: dffffc0000000000
R13: 1ffff92000185f98 R14: ffff88810754d880 R15: ffff8881007b7800
FS:  000000001c772880(0000) GS:ffff88811b280000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fb9fcf2e178 CR3: 00000001045d2002 CR4: 0000000000770ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
 <TASK>
 inet_accept+0x138/0x1d0 net/ipv4/af_inet.c:786
 do_accept+0x435/0x620 net/socket.c:1929
 __sys_accept4_file net/socket.c:1969 [inline]
 __sys_accept4+0x9b/0x110 net/socket.c:1999
 __do_sys_accept net/socket.c:2016 [inline]
 __se_sys_accept net/socket.c:2013 [inline]
 __x64_sys_accept+0x7d/0x90 net/socket.c:2013
 do_syscall_x64 arch/x86/entry/common.c:52 [inline]
 do_syscall_64+0x58/0x100 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x4315f9
Code: fd ff 48 81 c4 80 00 00 00 e9 f1 fe ff ff 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 ab b4 fd ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007ffdb26d9c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002b
RAX: ffffffffffffffda RBX: 0000000000400300 RCX: 00000000004315f9
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000004
RBP: 00000000006e1018 R08: 0000000000400300 R09: 0000000000400300
R10: 0000000000400300 R11: 0000000000000246 R12: 0000000000000000
R13: 000000000040cdf0 R14: 000000000040ce80 R15: 0000000000000055
 </TASK>

The reproducer invokes shutdown() before entering the listener status.
After commit 94062790 ("tcp: defer shutdown(SEND_SHUTDOWN) for
TCP_SYN_RECV sockets"), the above causes the child to reach the accept
syscall in FIN_WAIT1 status.

Eric noted we can relax the existing assertion in __inet_accept()
Reported-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/490Suggested-by: Eric Dumazet <edumazet@google.com>
Fixes: 94062790 ("tcp: defer shutdown(SEND_SHUTDOWN) for TCP_SYN_RECV sockets")
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/23ab880a44d8cfd967e84de8b93dbf48848e3d8c.1716299669.git.pabeni@redhat.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Recently, we had some servers upgraded to the latest kernel and noticed
the indicator from the user side showed worse results than before. It is
caused by the limitation of tp->rcv_wnd.

In 2018 commit a337531b ("tcp: up initial rmem to 128KB and SYN rwin
to around 64KB") limited the initial value of tp->rcv_wnd to 65535, most
CDN teams would not benefit from this change because they cannot have a
large window to receive a big packet, which will be slowed down especially
in long RTT. Small rcv_wnd means slow transfer speed, to some extent. It's
the side effect for the latency/time-sensitive users.

To avoid future confusion, current change doesn't affect the initial
receive window on the wire in a SYN or SYN+ACK packet which are set within
65535 bytes according to RFC 7323 also due to the limit in
__tcp_transmit_skb():

    th->window      = htons(min(tp->rcv_wnd, 65535U));

In one word, __tcp_transmit_skb() already ensures that constraint is
respected, no matter how large tp->rcv_wnd is. The change doesn't violate
RFC.

Let me provide one example if with or without the patch:
Before:
client   --- SYN: rwindow=65535 ---> server
client   <--- SYN+ACK: rwindow=65535 ----  server
client   --- ACK: rwindow=65536 ---> server
Note: for the last ACK, the calculation is 512 << 7.

After:
client   --- SYN: rwindow=65535 ---> server
client   <--- SYN+ACK: rwindow=65535 ----  server
client   --- ACK: rwindow=175232 ---> server
Note: I use the following command to make it work:
ip route change default via [ip] dev eth0 metric 100 initrwnd 120
For the last ACK, the calculation is 1369 << 7.

When we apply such a patch, having a large rcv_wnd if the user tweak this
knob can help transfer data more rapidly and save some rtts.

Fixes: a337531b ("tcp: up initial rmem to 128KB and SYN rwin to around 64KB")
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Link: https://lore.kernel.org/r/20240521134220.12510-1-kerneljasonxing@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

In the prueth_probe() function, if one of the calls to emac_phy_connect()
fails due to of_phy_connect() returning NULL, then the subsequent call to
phy_attached_info() will dereference a NULL pointer.

Check the return code of emac_phy_connect and fail cleanly if there is an
error.

Fixes: 128d5874 ("net: ti: icssg-prueth: Add ICSSG ethernet driver")
Cc: stable@vger.kernel.org
Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: MD Danish Anwar <danishanwar@ti.com>
Link: https://lore.kernel.org/r/20240521-icssg-prueth-fix-v1-1-b4b17b1433e9@bootlin.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

In tls_init(), a write memory barrier is missing, and store-store
reordering may cause NULL dereference in tls_{setsockopt,getsockopt}.

CPU0                               CPU1
-----                              -----
// In tls_init()
// In tls_ctx_create()
ctx = kzalloc()
ctx->sk_proto = READ_ONCE(sk->sk_prot) -(1)

// In update_sk_prot()
WRITE_ONCE(sk->sk_prot, tls_prots)     -(2)

                                   // In sock_common_setsockopt()
                                   READ_ONCE(sk->sk_prot)->setsockopt()

                                   // In tls_{setsockopt,getsockopt}()
                                   ctx->sk_proto->setsockopt()    -(3)

In the above scenario, when (1) and (2) are reordered, (3) can observe
the NULL value of ctx->sk_proto, causing NULL dereference.

To fix it, we rely on rcu_assign_pointer() which implies the release
barrier semantic. By moving rcu_assign_pointer() after ctx->sk_proto is
initialized, we can ensure that ctx->sk_proto are visible when
changing sk->sk_prot.

Fixes: d5bee737 ("net/tls: Annotate access to sk_prot with READ_ONCE/WRITE_ONCE")
Signed-off-by: Yewon Choi <woni9911@gmail.com>
Signed-off-by: Dae R. Jeong <threeearcat@gmail.com>
Link: https://lore.kernel.org/netdev/ZU4OJG56g2V9z_H7@dragonet/T/
Link: https://lore.kernel.org/r/Zkx4vjSFp0mfpjQ2@libra05Signed-off-by: Paolo Abeni <pabeni@redhat.com>

The assignment of pps_enable is protected by tmreg_lock, but the read
operation of pps_enable is not. So the Coverity tool reports a lock
evasion warning which may cause data race to occur when running in a
multithread environment. Although this issue is almost impossible to
occur, we'd better fix it, at least it seems more logically reasonable,
and it also prevents Coverity from continuing to issue warnings.

Fixes: 278d2404 ("net: fec: ptp: Enable PPS output based on ptp clock")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://lore.kernel.org/r/20240521023800.17102-1-wei.fang@nxp.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

This reverts commit 56573604.

According to the commit, it implements a manual AN-37 for some
"troublesome" Juniper MX5 switches. This appears to be a workaround for a
particular switch.

It has been reported that this causes a severe breakage for other switches,
including a Cisco 3560CX-12PD-S.

The code appears to be a workaround for a specific switch which fails to
link in SFI mode. It expects to see AN-37 auto negotiation in order to
link. The Cisco switch is not expecting AN-37 auto negotiation. When the
device starts the manual AN-37, the Cisco switch decides that the port is
confused and stops attempting to link with it. This persists until a power
cycle. A simple driver unload and reload does not resolve the issue, even
if loading with a version of the driver which lacks this workaround.

The authors of the workaround commit have not responded with
clarifications, and the result of the workaround is complete failure to
connect with other switches.

This appears to be a case where the driver can either "correctly" link with
the Juniper MX5 switch, at the cost of bricking the link with the Cisco
switch, or it can behave properly for the Cisco switch, but fail to link
with the Junipir MX5 switch. I do not know enough about the standards
involved to clearly determine whether either switch is at fault or behaving
incorrectly. Nor do I know whether there exists some alternative fix which
corrects behavior with both switches.

Revert the workaround for the Juniper switch.

Fixes: 56573604 ("ixgbe: Manual AN-37 for troublesome link partners for X550 SFI")
Link: https://lore.kernel.org/netdev/cbe874db-9ac9-42b8-afa0-88ea910e1e99@intel.com/T/
Link: https://forum.proxmox.com/threads/intel-x553-sfp-ixgbe-no-go-on-pve8.135129/#post-612291Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Cc: Jeff Daly <jeffd@silicom-usa.com>
Cc: kernel.org-fo5k2w@ycharbi.fr
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240520-net-2024-05-20-revert-silicom-switch-workaround-v1-1-50f80f261c94@intel.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Testing a network device that has large numbers of bytes/packets may
overflow. Using stats64 when comparing fixes this problem.

I tripped on this while iterating on a qstats patch for mlx5. See below
for confirmation without my added code that this is a bug.

Before this patch (with added debugging output):

$ NETIF=eth0 tools/testing/selftests/drivers/net/stats.py
KTAP version 1
1..4
ok 1 stats.check_pause
ok 2 stats.check_fec
rstat: 481708634 qstat: 666201639514 key: tx-bytes
not ok 3 stats.pkt_byte_sum
ok 4 stats.qstat_by_ifindex

Note the huge delta above ^^^ in the rtnl vs qstats.

After this patch:

$ NETIF=eth0 tools/testing/selftests/drivers/net/stats.py
KTAP version 1
1..4
ok 1 stats.check_pause
ok 2 stats.check_fec
ok 3 stats.pkt_byte_sum
ok 4 stats.qstat_by_ifindex

It looks like rtnl_fill_stats in net/core/rtnetlink.c will attempt to
copy the 64bit stats into a 32bit structure which is probably why this
behavior is occurring.

To show this is happening, you can get the underlying stats that the
stats.py test uses like this:

$ ./cli.py --spec ../../../Documentation/netlink/specs/rt_link.yaml \
           --do getlink --json '{"ifi-index": 7}'

And examine the output (heavily snipped to show relevant fields):

 'stats': {
           'multicast': 3739197,
           'rx-bytes': 1201525399,
           'rx-packets': 56807158,
           'tx-bytes': 492404458,
           'tx-packets': 1200285371,

 'stats64': {
             'multicast': 3739197,
             'rx-bytes': 35561263767,
             'rx-packets': 56807158,
             'tx-bytes': 666212335338,
             'tx-packets': 1200285371,

The stats.py test prior to this patch was using the 'stats' structure
above, which matches the failure output on my system.

Comparing side by side, rx-bytes and tx-bytes, and getting ethtool -S
output:

rx-bytes stats:    1201525399
rx-bytes stats64: 35561263767
rx-bytes ethtool: 36203402638

tx-bytes stats:      492404458
tx-bytes stats64: 666212335338
tx-bytes ethtool: 666215360113

Note that the above was taken from a system with an mlx5 NIC, which only
exposes ndo_get_stats64.

Based on the ethtool output and qstat output, it appears that stats.py
should be updated to use the 'stats64' structure for accurate
comparisons when packet/byte counters get very large.

To confirm that this was not related to the qstats code I was iterating
on, I booted a kernel without my driver changes and re-ran the test
which shows the qstats are skipped (as they don't exist for mlx5):

NETIF=eth0 tools/testing/selftests/drivers/net/stats.py
KTAP version 1
1..4
ok 1 stats.check_pause
ok 2 stats.check_fec
ok 3 stats.pkt_byte_sum # SKIP qstats not supported by the device
ok 4 stats.qstat_by_ifindex # SKIP No ifindex supports qstats

But, fetching the stats using the CLI

$ ./cli.py --spec ../../../Documentation/netlink/specs/rt_link.yaml \
           --do getlink --json '{"ifi-index": 7}'

Shows the same issue (heavily snipped for relevant fields only):

 'stats': {
           'multicast': 105489,
           'rx-bytes': 530879526,
           'rx-packets': 751415,
           'tx-bytes': 2510191396,
           'tx-packets': 27700323,
 'stats64': {
             'multicast': 105489,
             'rx-bytes': 530879526,
             'rx-packets': 751415,
             'tx-bytes': 15395093284,
             'tx-packets': 27700323,

Comparing side by side with ethtool -S on the unmodified mlx5 driver:

tx-bytes stats:    2510191396
tx-bytes stats64: 15395093284
tx-bytes ethtool: 17718435810

Fixes: f0e6c86e ("testing: net-drv: add a driver test for stats reporting")
Signed-off-by: Joe Damato <jdamato@fastly.com>
Link: https://lore.kernel.org/r/20240520235850.190041-1-jdamato@fastly.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Merge tag 'mm-nonmm-stable-2024-05-22-17-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull more non-mm updates from Andrew Morton:

 - A series ("kbuild: enable more warnings by default") from Arnd
   Bergmann which enables a number of additional build-time warnings. We
   fixed all the fallout which we could find, there may still be a few
   stragglers.

 - Samuel Holland has developed the series "Unified cross-architecture
   kernel-mode FPU API". This does a lot of consolidation of
   per-architecture kernel-mode FPU usage and enables the use of newer
   AMD GPUs on RISC-V.

 - Tao Su has fixed some selftests build warnings in the series
   "Selftests: Fix compilation warnings due to missing _GNU_SOURCE
   definition".

 - This pull also includes a nilfs2 fixup from Ryusuke Konishi.

* tag 'mm-nonmm-stable-2024-05-22-17-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (23 commits)
  nilfs2: make block erasure safe in nilfs_finish_roll_forward()
  selftests/harness: use 1024 in place of LINE_MAX
  Revert "selftests/harness: remove use of LINE_MAX"
  selftests/fpu: allow building on other architectures
  selftests/fpu: move FP code to a separate translation unit
  drm/amd/display: use ARCH_HAS_KERNEL_FPU_SUPPORT
  drm/amd/display: only use hard-float, not altivec on powerpc
  riscv: add support for kernel-mode FPU
  x86: implement ARCH_HAS_KERNEL_FPU_SUPPORT
  powerpc: implement ARCH_HAS_KERNEL_FPU_SUPPORT
  LoongArch: implement ARCH_HAS_KERNEL_FPU_SUPPORT
  lib/raid6: use CC_FLAGS_FPU for NEON CFLAGS
  arm64: crypto: use CC_FLAGS_FPU for NEON CFLAGS
  arm64: implement ARCH_HAS_KERNEL_FPU_SUPPORT
  ARM: crypto: use CC_FLAGS_FPU for NEON CFLAGS
  ARM: implement ARCH_HAS_KERNEL_FPU_SUPPORT
  arch: add ARCH_HAS_KERNEL_FPU_SUPPORT
  x86/fpu: fix asm/fpu/types.h include guard
  kbuild: enable -Wcast-function-type-strict unconditionally
  kbuild: enable -Wformat-truncation on clang
  ...

Pull more mm updates from Andrew Morton:
 "A series from Dave Chinner which cleans up and fixes the handling of
  nested allocations within stackdepot and page-owner"

* tag 'mm-stable-2024-05-22-17-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  mm/page-owner: use gfp_nested_mask() instead of open coded masking
  stackdepot: use gfp_nested_mask() instead of open coded masking
  mm: lift gfp_kmemleak_mask() to gfp.h

With the rework of how the __string() handles dynamic strings where it
saves off the source string in field in the helper structure[1], the
assignment of that value to the trace event field is stored in the helper
value and does not need to be passed in again.

This means that with:

  __string(field, mystring)

Which use to be assigned with __assign_str(field, mystring), no longer
needs the second parameter and it is unused. With this, __assign_str()
will now only get a single parameter.

There's over 700 users of __assign_str() and because coccinelle does not
handle the TRACE_EVENT() macro I ended up using the following sed script:

  git grep -l __assign_str | while read a ; do
      sed -e 's/\(__assign_str([^,]*[^ ,]\) *,[^;]*/\1)/' $a > /tmp/test-file;
      mv /tmp/test-file $a;
  done

I then searched for __assign_str() that did not end with ';' as those
were multi line assignments that the sed script above would fail to catch.

Note, the same updates will need to be done for:

  __assign_str_len()
  __assign_rel_str()
  __assign_rel_str_len()

I tested this with both an allmodconfig and an allyesconfig (build only for both).

[1] https://lore.kernel.org/linux-trace-kernel/20240222211442.634192653@goodmis.org/

Link: https://lore.kernel.org/linux-trace-kernel/20240516133454.681ba6a0@rorschach.local.home

Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Christian König <christian.koenig@amd.com> for the amdgpu parts.
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> #for
Acked-by: Rafael J. Wysocki <rafael@kernel.org> # for thermal
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Darrick J. Wong <djwong@kernel.org>	# xfs
Tested-by: Guenter Roeck <linux@roeck-us.net>