Unresolved nexthops are currently written to the adjacency table with a
discard action. Packets hitting such entries are trapped to the CPU via
the 'DISCARD_ROUTER3' trap which can be enabled or disabled on demand,
but is always enabled in order to ensure the kernel can resolve the
unresolved neighbours.

This trap will be needed for blackhole nexthops support. Therefore, move
unresolved nexthops to explicitly program the adjacency entries with a
trap action and a different trap identifier, 'RTR_EGRESS0'.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Up until now RIFs (router interfaces) were created on demand (e.g.,
when an IP address was added to a netdev). However, sometimes the device
needs to be provided with a RIF when one might not be available.

For example, adjacency entries that drop packets need to be programmed
with an egress RIF despite the RIF not being used to forward packets.

Create such a RIF during initialization so that it could be used later
on to support blackhole nexthops.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

David Howells says:

====================
rxrpc: Prelude to gssapi support

Here are some patches that do some reorganisation of the security class
handling in rxrpc to allow implementation of the RxGK security class that
will allow AF_RXRPC to use GSSAPI-negotiated tokens and better crypto.  The
RxGK security class is not included in this patchset.

It does the following things:

 (1) Add a keyrings patch to provide the original key description, as
     provided to add_key(), to the payload preparser so that it can
     interpret the content on that basis.  Unfortunately, the rxrpc_s key
     type wasn't written to interpret its payload as anything other than a
     string of bytes comprising a key, but for RxGK, more information is
     required as multiple Kerberos enctypes are supported.

 (2) Remove the rxk5 security class key parsing.  The rxk5 class never got
     rolled out in OpenAFS and got replaced with rxgk.

 (3) Support the creation of rxrpc keys with multiple tokens of different
     types.  If some types are not supported, the ENOPKG error is
     suppressed if at least one other token's type is supported.

 (4) Punt the handling of server keys (rxrpc_s type) to the appropriate
     security class.

 (5) Organise the security bits in the rxrpc_connection struct into a
     union to make it easier to override for other classes.

 (6) Move some bits from core code into rxkad that won't be appropriate to
     rxgk.

* tag 'rxrpc-next-20201123' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  rxrpc: Ask the security class how much space to allow in a packet
  rxrpc: rxkad: Don't use pskb_pull() to advance through the response packet
  rxrpc: Organise connection security to use a union
  rxrpc: Don't reserve security header in Tx DATA skbuff
  rxrpc: Merge prime_packet_security into init_connection_security
  rxrpc: Fix example key name in a comment
  rxrpc: Ignore unknown tokens in key payload unless no known tokens
  rxrpc: Make the parsing of xdr payloads more coherent
  rxrpc: Allow security classes to give more info on server keys
  rxrpc: Don't leak the service-side session key to userspace
  rxrpc: Hand server key parsing off to the security class
  rxrpc: Split the server key type (rxrpc_s) into its own file
  rxrpc: Don't retain the server key in the connection
  rxrpc: Support keys with multiple authentication tokens
  rxrpc: List the held token types in the key description in /proc/keys
  rxrpc: Remove the rxk5 security class as it's now defunct
  keys: Provide the original description to the key preparser
====================

Link: https://lore.kernel.org/r/160616220405.830164.2239716599743995145.stgit@warthog.procyon.org.ukSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This driver uses a normal timer for TX coalescing, which means that the
with the default tx-usecs of 1000 microseconds the cleanups actually
happen 10 ms or more later with HZ=100.  This leads to very low
througput with TCP when bridged to a slow link such as a 4G modem.  Fix
this by using an hrtimer instead.

On my ARM platform with HZ=100 and the default TX coalescing settings
(tx-frames 25 tx-usecs 1000), with "tc qdisc add dev eth0 root netem
delay 60ms 40ms rate 50Mbit" run on the server, netperf's TCP_STREAM
improves from ~5.5 Mbps to ~100 Mbps.
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Link: https://lore.kernel.org/r/20201120150208.6838-1-vincent.whitchurch@axis.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

s/tranport/transport/
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20201122180704.1366636-1-christophe.jaillet@wanadoo.frSigned-off-by: Jakub Kicinski <kuba@kernel.org>

linux/netdevice.h is included in very many places, touching any
of its dependecies causes large incremental builds.

Drop the linux/ethtool.h include, linux/netdevice.h just needs
a forward declaration of struct ethtool_ops.

Fix all the places which made use of this implicit include.
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Shannon Nelson <snelson@pensando.io>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Link: https://lore.kernel.org/r/20201120225052.1427503-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Memory allocation are done with 'dma_alloc_coherent()'. Be consistent
and use 'dma_free_coherent()' to free the corresponding memory.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20201121090330.1332543-1-christophe.jaillet@wanadoo.frSigned-off-by: Jakub Kicinski <kuba@kernel.org>

'pci_set_dma_mask()' + 'pci_set_consistent_dma_mask()' can be replaced by
an equivalent 'dma_set_mask_and_coherent()' which is much less verbose.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20201121090302.1332491-1-christophe.jaillet@wanadoo.frSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Kurt Kanzenbach says:

====================
net: dsa: hellcreek: Minor cleanups

fix two minor issues in the hellcreek driver.
====================

Link: https://lore.kernel.org/r/20201121114455.22422-1-kurt@linutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When DSA is not loaded when the driver is probed an error message is
printed. But, that's not really an error, just a defer. Use dev_err_probe()
instead.
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Remove unused and add needed includes. No functional change.
Suggested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Christian Eggers says:

====================
net: ptp: introduce common defines for PTP message types

This series introduces commen defines for PTP event messages. Driver
internal defines are removed and some uses of magic numbers are replaced
by the new defines.
====================

Link: https://lore.kernel.org/r/20201120084106.10046-1-ceggers@arri.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Remove driver internal defines for this. Masking msgtype with 0xf is
already done within ptp_get_msgtype().
Signed-off-by: Christian Eggers <ceggers@arri.de>
Cc: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Remove usage of magic numbers.
Signed-off-by: Christian Eggers <ceggers@arri.de>
Cc: Ioana Ciornei <ioana.ciornei@nxp.com>
Cc: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Cc: Yangbo Lu <yangbo.lu@nxp.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Using PTP wide defines will obsolete different driver internal defines
and uses of magic numbers.
Signed-off-by: Christian Eggers <ceggers@arri.de>
Cc: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

We're about to do reshuffling in networking headers and
eliminate some implicit includes. This results in:

In file included from ../net/ipv4/netfilter/arp_tables.c:26:
include/net/compat.h:60:40: error: unknown type name ‘compat_uptr_t’; did you mean ‘compat_ptr_ioctl’?
    struct sockaddr __user **save_addr, compat_uptr_t *ptr,
                                        ^~~~~~~~~~~~~
                                        compat_ptr_ioctl
include/net/compat.h:61:4: error: unknown type name ‘compat_size_t’; did you mean ‘compat_sigset_t’?
    compat_size_t *len);
    ^~~~~~~~~~~~~
    compat_sigset_t

Currently net/compat.h depends on linux/compat.h being included
first. After the upcoming changes this would break the 32bit build.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20201121214844.1488283-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Ask the security class how much header and trailer space to allow for when
allocating a packet, given how much data is remaining.

This will allow the rxgk security class to stick both a trailer in as well
as a header as appropriate in the future.
Signed-off-by: David Howells <dhowells@redhat.com>

Call netdev notifiers before and after changing the device type.
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Link: https://lore.kernel.org/r/20201118063919.29485-1-ms@dev.tdt.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

In the rxkad security class, don't use pskb_pull() to advance through the
contents of the response packet.  There's no point, especially as the next
and last access to the skbuff still has to allow for the wire header in the
offset (which we didn't advance over).

Better to just add the displacement to the next offset.
Signed-off-by: David Howells <dhowells@redhat.com>

Organise the security information in the rxrpc_connection struct to use a
union to allow for different data for different security classes.
Signed-off-by: David Howells <dhowells@redhat.com>

Insert the security header into the skbuff representing a DATA packet to be
transmitted rather than using skb_reserve() when the packet is allocated.
This makes it easier to apply crypto that spans the security header and the
data, particularly in the upcoming RxGK class where we have a common
encrypt-and-checksum function that is used in a number of circumstances.
Signed-off-by: David Howells <dhowells@redhat.com>

Merge the ->prime_packet_security() into the ->init_connection_security()
hook as they're always called together.
Signed-off-by: David Howells <dhowells@redhat.com>

Fix an example of an rxrpc key name in a comment.
Signed-off-by: David Howells <dhowells@redhat.com>

When parsing a payload for an rxrpc-type key, ignore any tokens that are
not of a known type and don't give an error for them - unless there are no
tokens of a known type.
Signed-off-by: David Howells <dhowells@redhat.com>

Make the parsing of xdr-encoded payloads, as passed to add_key, more
coherent.  Shuttling back and forth between various variables was a bit
hard to follow.
Signed-off-by: David Howells <dhowells@redhat.com>

Allow a security class to give more information on an rxrpc_s-type key when
it is viewed in /proc/keys.  This will allow the upcoming RxGK security
class to show the enctype name here.
Signed-off-by: David Howells <dhowells@redhat.com>

Don't let someone reading a service-side rxrpc-type key get access to the
session key that was exchanged with the client.  The server application
will, at some point, need to be able to read the information in the ticket,
but this probably shouldn't include the key material.
Signed-off-by: David Howells <dhowells@redhat.com>

Hand responsibility for parsing a server key off to the security class.  We
can determine which class from the description.  This is necessary as rxgk
server keys have different lookup requirements and different content
requirements (dependent on crypto type) to those of rxkad server keys.
Signed-off-by: David Howells <dhowells@redhat.com>

Split the server private key type (rxrpc_s) out into its own file rather
than mingling it with the authentication/client key type (rxrpc) since they
don't really bear any relation.
Signed-off-by: David Howells <dhowells@redhat.com>

Don't retain a pointer to the server key in the connection, but rather get
it on demand when the server has to deal with a response packet.

This is necessary to implement RxGK (GSSAPI-mediated transport class),
where we can't know which key we'll need until we've challenged the client
and got back the response.

This also means that we don't need to do a key search in the accept path in
softirq mode.

Also, whilst we're at it, allow the security class to ask for a kvno and
encoding-type variant of a server key as RxGK needs different keys for
different encoding types.  Keys of this type have an extra bit in the
description:

	"<service-id>:<security-index>:<kvno>:<enctype>"
Signed-off-by: David Howells <dhowells@redhat.com>

rxrpc-type keys can have multiple tokens attached for different security
classes.  Currently, rxrpc always picks the first one, whether or not the
security class it indicates is supported.

Add preliminary support for choosing which security class will be used
(this will need to be directed from a higher layer) and go through the
tokens to find one that's supported.
Signed-off-by: David Howells <dhowells@redhat.com>

When viewing an rxrpc-type key through /proc/keys, display a list of held
token types.
Signed-off-by: David Howells <dhowells@redhat.com>

Remove the rxrpc rxk5 security class as it's now defunct and nothing uses
it anymore.
Signed-off-by: David Howells <dhowells@redhat.com>

Provide the proposed description (add key) or the original description
(update/instantiate key) when preparsing a key so that the key type can
validate it against the data.

This is important for rxrpc server keys as we need to check that they have
the right amount of key material present - and it's better to do that when
the key is loaded rather than deep in trying to process a response packet.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
cc: keyrings@vger.kernel.org

Add support to choose RSS flow key algorithm with IPv4 transport protocol
field included in hashing input data. This will be enabled by default.
There-by enabling 3/5 tuple hash
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: George Cherian <george.cherian@marvell.com>
Link: https://lore.kernel.org/r/20201120093906.2873616-1-george.cherian@marvell.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'linux-can-next-for-5.11-20201120' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next

Marc Kleine-Budde says:

====================
pull-request: can-next 2020-11-20

The first patch is by Yegor Yefremov and he improves the j1939 documentaton by
adding tables for the CAN identifier and its fields.

Then there are 8 patches by Oliver Hartkopp targeting the CAN driver
infrastructure and drivers. These add support for optional DLC element to the
Classical CAN frame structure. See patch ea780056 ("can: add optional DLC
element to Classical CAN frame structure") for details. Oliver's last patch
adds len8_dlc support to several drivers. Stefan Mätje provides a patch to add
len8_dlc support to the esd_usb2 driver.

The next patch is by Oliver Hartkopp, too and adds support for modification of
Classical CAN DLCs to CAN GW sockets.

The next 3 patches target the nxp,flexcan DT bindings. One patch by my adds the
missing uint32 reference to the clock-frequency property. Joakim Zhang's
patches fix the fsl,clk-source property and add the IMX_SC_R_CAN() macro to the
imx firmware header file, which will be used in the flexcan driver later.

Another patch by Joakim Zhang prepares the flexcan driver for SCU based
stop-mode, by giving the existing, GPR based stop-mode, a _GPR postfix.

The next 5 patches are by me, target the flexcan driver, and clean up the
.ndo_open and .ndo_stop callbacks. These patches try to fix a sporadically
hanging flexcan_close() during simultanious ifdown, sending of CAN messages and
probably open CAN bus. I was never able to reproduce, but these seem to fix the
problem at the reporting user. As these changes are rather big, I'd like to
mainline them via net-next/master.

The next patches are by Jimmy Assarsson and Christer Beskow, they add support
for new USB devices to the existing kvaser_usb driver.

The last patch is by Kaixu Xia and simplifies the return in the
mcp251xfd_chip_softreset() function in the mcp251xfd driver.

* tag 'linux-can-next-for-5.11-20201120' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: (25 commits)
  can: mcp251xfd: remove useless code in mcp251xfd_chip_softreset
  can: kvaser_usb: Add new Kvaser hydra devices
  can: kvaser_usb: kvaser_usb_hydra: Add support for new device variant
  can: kvaser_usb: Add new Kvaser Leaf v2 devices
  can: kvaser_usb: Add USB_{LEAF,HYDRA}_PRODUCT_ID_END defines
  can: flexcan: flexcan_close(): change order if commands to properly shut down the controller
  can: flexcan: flexcan_open(): completely initialize controller before requesting IRQ
  can: flexcan: flexcan_rx_offload_setup(): factor out mailbox and rx-offload setup into separate function
  can: flexcan: move enabling/disabling of interrupts from flexcan_chip_{start,stop}() to callers
  can: flexcan: factor out enabling and disabling of interrupts into separate function
  can: flexcan: rename macro FLEXCAN_QUIRK_SETUP_STOP_MODE -> FLEXCAN_QUIRK_SETUP_STOP_MODE_GPR
  dt-bindings: firmware: add IMX_SC_R_CAN(x) macro for CAN
  dt-bindings: can: fsl,flexcan: fix fsl,clk-source property
  dt-bindings: can: fsl,flexcan: add uint32 reference to clock-frequency property
  can: gw: support modification of Classical CAN DLCs
  can: drivers: add len8_dlc support for esd_usb2 CAN adapter
  can: drivers: add len8_dlc support for various CAN adapters
  can: drivers: introduce helpers to access Classical CAN DLC values
  can: update documentation for DLC usage in Classical CAN
  can: rename CAN FD related can_len2dlc and can_dlc2len helpers
  ...
====================

Link: https://lore.kernel.org/r/20201120133318.3428231-1-mkl@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Use netdev->tstats instead of a member of net_bridge for storing
a pointer to the per-cpu counters. This allows us to use core
functionality for statistics handling.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/9bad2be2-fd84-7c6e-912f-cee433787018@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Huazhong Tan says:

====================
net: hns3: misc updates for -next

This series includes some misc updates for the HNS3 ethernet driver.

 #1 adds support for 1280 queues
 #2 adds mapping for BAR45 which is needed by RoCE client.
 #3 extend the interrupt resources.
 #4&#5 add support to query firmware's calculated shaping parameters.
====================

Link: https://lore.kernel.org/r/1605863783-36995-1-git-send-email-tanhuazhong@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Adds debugfs to dump new shaping parameters: rate and flag.
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Since the calculation of the driver is fixed, if the number of
queue or clock changed, the calculated result may be inaccurate.

So for compatible and maintainable, add a new flag to tell the
firmware to calculate the shaping parameters with the specified
rate.
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>