Don't have a seperate return path for the mentioned case. Now
we do the same "take lowest inode/offset" logic for all found clones.

Commit is a result of Arne's review.
Signed-off-by: Alexander Block <ablock84@googlemail.com>

Make sure to never get in trouble due to the backref_ctx
which was on the stack before.

Commit is a result of Arne's review.
Signed-off-by: Alexander Block <ablock84@googlemail.com>

The new name should be easier to understand/read.

Commit is a result of Arne's review.
Signed-off-by: Alexander Block <ablock84@googlemail.com>

use_list is a leftover and unused.
Signed-off-by: Alexander Block <ablock84@googlemail.com>

We only added the parent for the new position of a moved dir.
We also need to add the old parent of the moved dir.
Reported-by: Alex Lyakas <alex.bolshoy.btrfs@gmail.com>
Signed-off-by: Alexander Block <ablock84@googlemail.com>

fs_path_remove is not used at the moment due to a previous patch.
Remove it for now (with #if 0) to avoid compile warnings.
Signed-off-by: Alexander Block <ablock84@googlemail.com>

We missed that check which resultet in all refs with the same name
being reported as first_ref.
Reported-by: Alex Lyakas <alex.bolshoy.btrfs@gmail.com>
Signed-off-by: Alexander Block <ablock84@googlemail.com>

When the current inodes inum is smaller then the inum of the
parent directory strange things were happending due to wrong
path resolution and other bugs. Fix this with a new approach
for the problem.
Reported-by: Alex Lyakas <alex.bolshoy.btrfs@gmail.com>
Signed-off-by: Alexander Block <ablock84@googlemail.com>

We need rdev in the next commit.
Signed-off-by: Alexander Block <ablock84@googlemail.com>

IBM reported a deadlock in select_parent().  This was found to be caused
by taking rename_lock when already locked when restarting the tree
traversal.

There are two cases when the traversal needs to be restarted:

 1) concurrent d_move(); this can only happen when not already locked,
    since taking rename_lock protects against concurrent d_move().

 2) racing with final d_put() on child just at the moment of ascending
    to parent; rename_lock doesn't protect against this rare race, so it
    can happen when already locked.

Because of case 2, we need to be able to handle restarting the traversal
when rename_lock is already held.  This patch fixes all three callers of
try_to_ascend().

IBM reported that the deadlock is gone with this patch.

[ I rewrote the patch to be smaller and just do the "goto again" if the
  lock was already held, but credit goes to Miklos for the real work.
   - Linus ]
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull IOMMU fixes from Joerg Roedel:
 "Two small patches:

	* One patch to fix the function declarations for
	  !CONFIG_IOMMU_API. This is causing build errors
	  in linux-next and should be fixed for v3.6.

	* Another patch to fix an IOMMU group related NULL pointer
	  dereference."

* tag 'iommu-fixes-v3.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/amd: Fix wrong assumption in iommu-group specific code
  iommu: static inline iommu group stub functions

Pull NVMe driver fixes from Matthew Wilcox:
 "Now that actual hardware has been released (don't have any yet
  myself), people are starting to want some of these fixes merged."

Willy doesn't have hardware? Guys...

* git://git.infradead.org/users/willy/linux-nvme:
  NVMe: Cancel outstanding IOs on queue deletion
  NVMe: Free admin queue memory on initialisation failure
  NVMe: Use ida for nvme device instance
  NVMe: Fix whitespace damage in nvme_init
  NVMe: handle allocation failure in nvme_map_user_pages()
  NVMe: Fix uninitialized iod compiler warning
  NVMe: Do not set IO queue depth beyond device max
  NVMe: Set block queue max sectors
  NVMe: use namespace id for nvme_get_features
  NVMe: replace nvme_ns with nvme_dev for user admin
  NVMe: Fix nvme module init when nvme_major is set
  NVMe: Set request queue logical block size

Sasha Levin has been running trinity in a KVM tools guest, and was able
to trigger the BUG_ON() at arch/x86/mm/pat.c:279 (verifying the range of
the memory type).  The call trace showed that it was mtdchar_mmap() that
created an invalid remap_pfn_range().

The problem is that mtdchar_mmap() does various really odd and subtle
things with the vma page offset etc, and uses the wrong types (and the
wrong overflow) detection for it.

For example, the page offset may well be 32-bit on a 32-bit
architecture, but after shifting it up by PAGE_SHIFT, we need to use a
potentially 64-bit resource_size_t to correctly hold the full value.

Also, we need to check that the vma length plus offset doesn't overflow
before we check that it is smaller than the length of the mtdmap region.

This fixes things up and tries to make the code a bit easier to read.
Reported-and-tested-by: Sasha Levin <levinsasha928@gmail.com>
Acked-by: Suresh Siddha <suresh.b.siddha@intel.com>
Acked-by: Artem Bityutskiy <dedekind1@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: linux-mtd@lists.infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull networking fixes from David S Miller:

 1) Netfilter xt_limit module can use uninitialized rules, from Jan
    Engelhardt.

 2) Wei Yongjun has found several more spots where error pointers were
    treated as NULL/non-NULL and vice versa.

 3) bnx2x was converted to pci_io{,un}map() but one remaining plain
    iounmap() got missed.  From Neil Horman.

 4) Due to a fence-post type error in initialization of inetpeer entries
    (which is where we store the ICMP rate limiting information), we can
    erroneously drop ICMPs if the inetpeer was created right around when
    jiffies wraps.

    Fix from Nicolas Dichtel.

 5) smsc75xx resume fix from Steve Glendinnig.

 6) LAN87xx smsc chips need an explicit hardware init, from Marek Vasut.

 7) qlcnic uses msleep() with locks held, fix from Narendra K.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  netdev: octeon: fix return value check in octeon_mgmt_init_phy()
  inetpeer: fix token initialization
  qlcnic: Fix scheduling while atomic bug
  bnx2: Clean up remaining iounmap
  net: phy: smsc: Implement PHY config_init for LAN87xx
  smsc75xx: fix resume after device reset
  netdev: pasemi: fix return value check in pasemi_mac_phy_init()
  team: fix return value check
  l2tp: fix return value check
  netfilter: xt_limit: have r->cost != 0 case work

Pull vfs fixes from Al Viro:
 "A couple of fixes; one for automount/lazy umount race, another a
  classic "we don't protect the refcount transition to zero with the
  lock that protects looking for object in hash" kind of crap in lockd."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  close the race in nlmsvc_free_block()
  do_add_mount()/umount -l races

Pull UML fixes from Richard Weinberger.

* 'for-linus-3.6-rc-final' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
  um: Preinclude include/linux/kern_levels.h
  um: Fix IPC on um
  um: kill thread->forking
  um: let signal_delivered() do SIGTRAP on singlestepping into handler
  um: don't leak floating point state and segment registers on execve()
  um: take cleaning singlestep to start_thread()

Pull dm fixes from Alasdair G Kergon:
 "A few fixes for problems discovered during the 3.6 cycle.

  Of particular note, are fixes to the thin target's discard support,
  which I hope is finally working correctly; and fixes for multipath
  ioctls and device limits when there are no paths."

* tag 'dm-3.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm:
  dm verity: fix overflow check
  dm thin: fix discard support for data devices
  dm thin: tidy discard support
  dm: retain table limits when swapping to new table with no devices
  dm table: clear add_random unless all devices have it set
  dm: handle requests beyond end of device instead of using BUG_ON
  dm mpath: only retry ioctl when no paths if queue_if_no_path set
  dm thin: do not set discard_zeroes_data

Speculative cache pagecache lookups can elevate the refcount from
under us, so avoid the false positive. If the refcount is < 2 we'll be
notified by a VM_BUG_ON in put_page_testzero as there are two
put_page(src_page) in a row before returning from this function.
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Petr Holasek <pholasek@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The new IOMMU groups code in the AMD IOMMU driver makes the
assumption that there is a pci_dev struct available for all
device-ids listed in the IVRS ACPI table. Unfortunatly this
assumption is not true and so this code causes a NULL
pointer dereference at boot on some systems.

Fix it by making sure the given pointer is never NULL when
passed to the group specific code. The real fix is larger
and will be queued for v3.7.
Reported-by: Florian Dazinger <florian@dazinger.net>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

In case of error, the function of_phy_connect() returns NULL
pointer not ERR_PTR(). The IS_ERR() test in the return value
check should be replaced with NULL test.

dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull drm fixes from Dave Airlie:
 "The three nouveau fixes quiten unneeded dmesg spam that people are
   seeing and pondering,

  The udl fix stops it from trying to driver monitors that are too big,
  where we get a black screen.

  And a vmware memory alloc problem."

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/nvc0/fifo: ignore bits in PFIFO_INTR that aren't set in PFIFO_INTR_EN
  drm/udl: limit modes to the sku pixel limits.
  vmwgfx: corruption in vmw_event_fence_action_create()
  drm/nvc0/ltcg: mask off intr 0x10
  drm/nouveau: silence a debug message triggered by newer userspace

Pull USB fixes from Greg Kroah-Hartman:
 "Here are two USB bugfixes for your 3.6-rc7 tree.

  The OHCI fix has been reported a number of times and is a regression
  from 3.5, and the patch that causes the regression was on the way to
  the -stable trees before I was reminded (again) that this fix needed
  to get to your tree soon.

  The host controller bugfix was reported in older kernels as being
  pretty easy to trigger, and has been tested by Red Hat and their
  customers.

  Both have been in the usb-next branch in the -next tree for a while
  now, I just cherry-picked them out to get to you in time for the 3.6
  release.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'usb-3.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: Fix race condition when removing host controllers
  USB: ohci-at91: fix null pointer in ohci_hcd_at91_overcurrent_irq

Also fix the calls to next_packet_size() for the pause case. This was
missed in 245baf98 ("ALSA: snd-usb: fix calls to next_packet_size").
Signed-off-by: Daniel Mack <zonque@gmail.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Reported-and-tested-by: Christian Tefzer <ctrefzer@gmx.de>
Cc: stable@kernel.org
[ Taking directly because Takashi is on vacation  - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull ASoC update from Mark Brown:
 "One small and obvious driver-specific fix.

  Takashi is on vacation now so he asked me to send directly, it's a
  pretty bad bug with low regression risk."

* tag 'asoc-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound:
  ASoC: wm2000: Correct register size

When jiffies wraps around (for example, 5 minutes after the boot, see
INITIAL_JIFFIES) and peer has just been created, now - peer->rate_last can be
< XRLIM_BURST_FACTOR * timeout, so token is not set to the maximum value, thus
some icmp packets can be unexpectedly dropped.

Fix this case by initializing last_rate to 60 seconds in the past.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In the device close path, 'qlcnic_fw_destroy_ctx' and
'qlcnic_poll_rsp' call msleep. But  'qlcnic_fw_destroy_ctx' and
'qlcnic_poll_rsp' are called with 'adapter->tx_clean_lock' spin lock
held resulting in scheduling while atomic bug causing the following
trace.

I observed that the commit 012dc19a
from John Fastabend addresses a similar issue in ixgbevf driver.
Adopting the same approach used in the commit, this patch uses mdelay
to address the issue.

[79884.999115] BUG: scheduling while atomic: ip/30846/0x00000002
[79885.005562] INFO: lockdep is turned off.
[79885.009958] Modules linked in: qlcnic fuse nf_conntrack_netbios_ns nf_conntrack_broadcast ipt_MASQUERADE bnep bluetooth rfkill ip6table_mangle ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_filter ip6_tables iptable_nat nf_nat iptable_mangle ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack iptable_filter ip_tables dcdbas coretemp kvm_intel kvm iTCO_wdt ixgbe iTCO_vendor_support crc32c_intel ghash_clmulni_intel nfsd microcode sb_edac pcspkr edac_core dca bnx2x shpchp auth_rpcgss nfs_acl lpc_ich mfd_core mdio lockd libcrc32c wmi acpi_pad acpi_power_meter sunrpc uinput sd_mod sr_mod cdrom crc_t10dif ahci libahci libata megaraid_sas usb_storage dm_mirror dm_region_hash dm_log dm_mod [last unloaded: qlcnic]
[79885.083608] Pid: 30846, comm: ip Tainted: G        W  O 3.6.0-rc7+ #1
[79885.090805] Call Trace:
[79885.093569]  [<ffffffff816764d8>] __schedule_bug+0x68/0x76
[79885.099699]  [<ffffffff8168358e>] __schedule+0x99e/0xa00
[79885.105634]  [<ffffffff81683929>] schedule+0x29/0x70
[79885.111186]  [<ffffffff81680def>] schedule_timeout+0x16f/0x350
[79885.117724]  [<ffffffff811afb7a>] ? init_object+0x4a/0x90
[79885.123770]  [<ffffffff8107c190>] ? __internal_add_timer+0x140/0x140
[79885.130873]  [<ffffffff81680fee>] schedule_timeout_uninterruptible+0x1e/0x20
[79885.138773]  [<ffffffff8107e830>] msleep+0x20/0x30
[79885.144159]  [<ffffffffa04c7fbf>] qlcnic_issue_cmd+0xef/0x290 [qlcnic]
[79885.151478]  [<ffffffffa04c8265>] qlcnic_fw_cmd_destroy_rx_ctx+0x55/0x90 [qlcnic]
[79885.159868]  [<ffffffffa04c92fd>] qlcnic_fw_destroy_ctx+0x2d/0xa0 [qlcnic]
[79885.167576]  [<ffffffffa04bf2ed>] __qlcnic_down+0x11d/0x180 [qlcnic]
[79885.174708]  [<ffffffffa04bf6f8>] qlcnic_close+0x18/0x20 [qlcnic]
[79885.181547]  [<ffffffff8153b4c5>] __dev_close_many+0x95/0xe0
[79885.187899]  [<ffffffff8153b548>] __dev_close+0x38/0x50
[79885.193761]  [<ffffffff81545101>] __dev_change_flags+0xa1/0x180
[79885.200419]  [<ffffffff81545298>] dev_change_flags+0x28/0x70
[79885.206779]  [<ffffffff815531b8>] do_setlink+0x378/0xa00
[79885.212731]  [<ffffffff81354fe1>] ? nla_parse+0x31/0xe0
[79885.218612]  [<ffffffff815558ee>] rtnl_newlink+0x37e/0x560
[79885.224768]  [<ffffffff812cfa19>] ? selinux_capable+0x39/0x50
[79885.231217]  [<ffffffff812cbf98>] ? security_capable+0x18/0x20
[79885.237765]  [<ffffffff81555114>] rtnetlink_rcv_msg+0x114/0x2f0
[79885.244412]  [<ffffffff81551f87>] ? rtnl_lock+0x17/0x20
[79885.250280]  [<ffffffff81551f87>] ? rtnl_lock+0x17/0x20
[79885.256148]  [<ffffffff81555000>] ? __rtnl_unlock+0x20/0x20
[79885.262413]  [<ffffffff81570fc1>] netlink_rcv_skb+0xa1/0xb0
[79885.268661]  [<ffffffff81551fb5>] rtnetlink_rcv+0x25/0x40
[79885.274727]  [<ffffffff815708bd>] netlink_unicast+0x19d/0x220
[79885.281146]  [<ffffffff81570c45>] netlink_sendmsg+0x305/0x3f0
[79885.287595]  [<ffffffff8152b188>] ? sock_update_classid+0x148/0x2e0
[79885.294650]  [<ffffffff81525c2c>] sock_sendmsg+0xbc/0xf0
[79885.300600]  [<ffffffff8152600c>] __sys_sendmsg+0x3ac/0x3c0
[79885.306853]  [<ffffffff8109be23>] ? up_read+0x23/0x40
[79885.312510]  [<ffffffff816896cc>] ? do_page_fault+0x2bc/0x570
[79885.318968]  [<ffffffff81191854>] ? sys_brk+0x44/0x150
[79885.324715]  [<ffffffff811c458c>] ? fget_light+0x24c/0x520
[79885.330875]  [<ffffffff815286f9>] sys_sendmsg+0x49/0x90
[79885.336707]  [<ffffffff8168e429>] system_call_fastpath+0x16/0x1b
Signed-off-by: Narendra K <narendra_k@dell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

commit c0357e97 modified bnx2 to switch from
using ioremap/iounmap to pci_iomap/pci_iounmap.  They missed a spot in the error
path of bnx2_init_one though.  This patch just cleans that up.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
CC: Michael Chan <mcan@broadcom.com>
CC: "David S. Miller" <davem@davemloft.net>
Acked-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull one more arm-soc bugfix from Olof Johansson:
 "Here's a bugfix for orion5x.  Without this, PCI doesn't initialize
  properly because of too small coherent pool to cover the allocations
  needed.

  A similar fix has already been done on kirkwood."

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: Orion5x: Fix too small coherent pool.

Pull ARM dma-mapping fix from Marek Szyprowski:
 "This patch fixes a potential memory leak in the ARM dma-mapping code."

* 'fixes-for-3.6' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping:
  ARM: dma-mapping: Fix potential memory leak in atomic_pool_init()

Pull GPIO fix from Linus Walleij:
 "A late GPIO fix: Roland Stigge found a problem in the LPC32xx driver
  where a callback ignores one of its arguments.  It needs to go into
  stable too so sending this upstream immediately."

* tag 'gpio-fixes-v3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio-lpc32xx: Fix value handling of gpio_direction_output()

Pull two md bugfixes from NeilBrown:
 "One (missing spinlock init) was only introduced recently.  The other
  has been present as long as raid10 has been supported, so is tagged
  for -stable."

* tag 'md-3.6-fixes' of git://neil.brown.name/md:
  md/raid10: fix "enough" function for detecting if array is failed.
  md/raid5: add missing spin_lock_init.

Pull EDAC fixes from Mauro Carvalho Chehab:
 "Three edac fixes at the memory enumeration logic:
        - i3200_edac: Fixes a regression at the memory rank size, when the
                memorias are dual-rank;
        - i5000_edac: Fix a longstanding bug when calculating the memory
                size: before Kernel 3.6, the memory size were right only
                with one specific configuration;
        - sb_edac: Fixes a bug since the initial release of the driver:
                with 16GB DIMMs, there's an overflow at the memory size,
                causing the number of pages per dimm (an unsigned value)
                to have the highest bit equal to 1, effectively mangling
                the memory size.

  The third bug can potentially affect the error decoding logic as well."

* git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac:
  sb_edac: Avoid overflow errors at memory size calculation
  i5000: Fix the memory size calculation with 2R memories
  i3200_edac: Fix memory rank size

"Search list for X" sounds like you're trying to find X on a list.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The LAN8710/LAN8720 chips do have broken the "FlexPWR" smart power-saving
capability. Enabling it leads to the PHY not being able to detect Link when
cold-started without cable connected. Thus, make sure this is disabled.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Christian Hohnstaedt <chohnstaedt@innominate.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Otavio Salvador <otavio@ossystems.com.br>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: David S. Miller <davem@davemloft.net>

On some systems this device fails to properly resume after suspend,
this patch fixes it by running the usbnet_resume handler.

I suspect this also fixes this bug:

http://code.google.com/p/chromium-os/issues/detail?id=31871Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

The userspace part of UML uses the asm-offsets.h generator mechanism to
create definitions for UM_KERN_<LEVEL> that match the in-kernel
KERN_<LEVEL> constant definitions.

As of commit 04d2c8c8 ("printk: convert
the format for KERN_<LEVEL> to a 2 byte pattern"), KERN_<LEVEL> is no
longer expanded to the literal '"<LEVEL>"', but to '"\001" "LEVEL"', i.e.
it contains two parts.

However, the combo of DEFINE_STR() in
arch/x86/um/shared/sysdep/kernel-offsets.h and sed-y in Kbuild doesn't
support string literals consisting of multiple parts. Hence for all
UM_KERN_<LEVEL> definitions, only the SOH character is retained in the actual
definition, while the remainder ends up in the comment. E.g. in
include/generated/asm-offsets.h we get

    #define UM_KERN_INFO "\001" /* "6" KERN_INFO */

instead of

    #define UM_KERN_INFO "\001" "6" /* KERN_INFO */

This causes spurious '^A' output in some kernel messages:

    Calibrating delay loop... 4640.76 BogoMIPS (lpj=23203840)
    pid_max: default: 32768 minimum: 301
    Mount-cache hash table entries: 256
    ^AChecking that host ptys support output SIGIO...Yes
    ^AChecking that host ptys support SIGIO on close...No, enabling workaround
    ^AUsing 2.6 host AIO
    NET: Registered protocol family 16
    bio: create slab <bio-0> at 0
    Switching to clocksource itimer

To fix this:
  - Move the mapping from UM_KERN_<LEVEL> to KERN_<LEVEL> from
    arch/um/include/shared/common-offsets.h to
    arch/um/include/shared/user.h, which is preincluded for all userspace
    parts,
  - Preinclude include/linux/kern_levels.h for all userspace parts, to
    obtain the in-kernel KERN_<LEVEL> constant definitions. This doesn't
    violate the kernel/userspace separation, as include/linux/kern_levels.h
    is self-contained and doesn't expose any other kernel internals.
  - Remove the now unused STR() and DEFINE_STR() macros.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Richard Weinberger <richard@nod.at>

commit c1d7e01d (ipc: use Kconfig options for __ARCH_WANT_[COMPAT_]IPC_PARSE_VERSION)
forgot UML and broke IPC on it.
Also UML has to select ARCH_WANT_IPC_PARSE_VERSION usin Kconfig.

Reported-and-tested-by: <Toralf Förster toralf.foerster@gmx.de>
Signed-off-by: Richard Weinberger <richard@nod.at>

In case of error, the function of_phy_connect() returns NULL
pointer not ERR_PTR(). The IS_ERR() test in the return value
check should be replaced with NULL test.

dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

In case of error, the function genlmsg_put() returns NULL pointer
not ERR_PTR(). The IS_ERR() test in the return value check should
be replaced with NULL test.

dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>