- 17 Jan, 2020 1 commit
-
-
jimyan authored
On a system with two host bridges(0000:00:00.0,0000:80:00.0), iommu initialization fails with DMAR: Device scope type does not match for 0000:80:00.0 This is because the DMAR table reports this device as having scope 2 (ACPI_DMAR_SCOPE_TYPE_BRIDGE): but the device has a type 0 PCI header: 80:00.0 Class 0600: Device 8086:2020 (rev 06) 00: 86 80 20 20 47 05 10 00 06 00 00 06 10 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 00 00 30: 00 00 00 00 90 00 00 00 00 00 00 00 00 01 00 00 VT-d works perfectly on this system, so there's no reason to bail out on initialization due to this apparent scope mismatch. Add the class 0x06 ("PCI_BASE_CLASS_BRIDGE") as a heuristic for allowing DMAR initialization for non-bridge PCI devices listed with scope bridge. Signed-off-by:jimyan <jimyan@baidu.com> Reviewed-by:
Jerry Snitselaar <jsnitsel@redhat.com> Reviewed-by:
Roland Dreier <roland@purestorage.com> Signed-off-by:
Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by:
Joerg Roedel <jroedel@suse.de>
-
- 07 Jan, 2020 21 commits
-
-
Lu Baolu authored
Export page table internals of the domain attached to each device. Example of such dump on a Skylake machine: $ sudo cat /sys/kernel/debug/iommu/intel/domain_translation_struct [ ... ] Device 0000:00:14.0 with pasid 0 @0x15f3d9000 IOVA_PFN PML5E PML4E 0x000000008ced0 | 0x0000000000000000 0x000000015f3da003 0x000000008ced1 | 0x0000000000000000 0x000000015f3da003 0x000000008ced2 | 0x0000000000000000 0x000000015f3da003 0x000000008ced3 | 0x0000000000000000 0x000000015f3da003 0x000000008ced4 | 0x0000000000000000 0x000000015f3da003 0x000000008ced5 | 0x0000000000000000 0x000000015f3da003 0x000000008ced6 | 0x0000000000000000 0x000000015f3da003 0x000000008ced7 | 0x0000000000000000 0x000000015f3da003 0x000000008ced8 | 0x0000000000000000 0x000000015f3da003 0x000000008ced9 | 0x0000000000000000 0x000000015f3da003 PDPE PDE PTE 0x000000015f3db003 0x000000015f3dc003 0x000000008ced0003 0x000000015f3db003 0x000000015f3dc003 0x000000008ced1003 0x000000015f3db003 0x000000015f3dc003 0x000000008ced2003 0x000000015f3db003 0x000000015f3dc003 0x000000008ced3003 0x000000015f3db003 0x000000015f3dc003 0x000000008ced4003 0x000000015f3db003 0x000000015f3dc003 0x000000008ced5003 0x000000015f3db003 0x000000015f3dc003 0x000000008ced6003 0x000000015f3db003 0x000000015f3dc003 0x000000008ced7003 0x000000015f3db003 0x000000015f3dc003 0x000000008ced8003 0x000000015f3db003 0x000000015f3dc003 0x000000008ced9003 [ ... ] Signed-off-by:
-
Lu Baolu authored
After we make all map/unmap paths support first level page table. Let's turn it on if hardware supports scalable mode. Signed-off-by:
-
Lu Baolu authored
First-level translation may map input addresses to 4-KByte pages, 2-MByte pages, or 1-GByte pages. Support for 4-KByte pages and 2-Mbyte pages are mandatory for first-level translation. Hardware support for 1-GByte page is reported through the FL1GP field in the Capability Register. Signed-off-by:
-
Lu Baolu authored
First-level translation restricts the input-address to a canonical address (i.e., address bits 63:N have the same value as address bit [N-1], where N is 48-bits with 4-level paging and 57-bits with 5-level paging). (section 3.6 in the spec) This makes first level IOVA canonical by using IOVA with bit [N-1] always cleared. Signed-off-by:
-
Lu Baolu authored
When software has changed first-level tables, it should invalidate the affected IOTLB and the paging-structure-caches using the PASID- based-IOTLB Invalidate Descriptor defined in spec 6.5.2.4. Signed-off-by:
-
Lu Baolu authored
Intel VT-d in scalable mode supports two types of page tables for IOVA translation: first level and second level. The IOMMU driver can choose one from both for IOVA translation according to the use case. This sets up the pasid entry if a domain is selected to use the first-level page table for iova translation. Signed-off-by:
-
Lu Baolu authored
Current intel_pasid_setup_first_level() use 5-level paging for first level translation if CPUs use 5-level paging mode too. This makes sense for SVA usages since the page table is shared between CPUs and IOMMUs. But it makes no sense if we only want to use first level for IOVA translation. Add PASID_FLAG_FL5LP bit in the flags which indicates whether the 5-level paging mode should be used. Signed-off-by:
-
Lu Baolu authored
This adds the Intel VT-d specific callback of setting DOMAIN_ATTR_NESTING domain attribution. It is necessary to let the VT-d driver know that the domain represents a virtual machine which requires the IOMMU hardware to support nested translation mode. Return success if the IOMMU hardware suports nested mode, otherwise failure. Signed-off-by:
Yi Sun <yi.y.sun@linux.intel.com> Signed-off-by:
-
Lu Baolu authored
This checks whether a domain should use the first level page table for map/unmap and marks it in the domain structure. Signed-off-by:
-
Lu Baolu authored
Currently if flush queue initialization fails, we return error or enforce the system-wide strict mode. These are unnecessary because we always check the existence of a flush queue before queuing any iova's for lazy flushing. Printing a informational message is enough. Signed-off-by:
-
Lu Baolu authored
If Intel IOMMU strict mode is enabled by users, it's unnecessary to create the iova flush queue. Signed-off-by:
-
Lu Baolu authored
Current map_sg stores trace message in a coarse manner. This extends it so that more detailed messages could be traced. The map_sg trace message looks like: map_sg: dev=0000:00:17.0 [1/9] dev_addr=0xf8f90000 phys_addr=0x158051000 size=4096 map_sg: dev=0000:00:17.0 [2/9] dev_addr=0xf8f91000 phys_addr=0x15a858000 size=4096 map_sg: dev=0000:00:17.0 [3/9] dev_addr=0xf8f92000 phys_addr=0x15aa13000 size=4096 map_sg: dev=0000:00:17.0 [4/9] dev_addr=0xf8f93000 phys_addr=0x1570f1000 size=8192 map_sg: dev=0000:00:17.0 [5/9] dev_addr=0xf8f95000 phys_addr=0x15c6d0000 size=4096 map_sg: dev=0000:00:17.0 [6/9] dev_addr=0xf8f96000 phys_addr=0x157194000 size=4096 map_sg: dev=0000:00:17.0 [7/9] dev_addr=0xf8f97000 phys_addr=0x169552000 size=4096 map_sg: dev=0000:00:17.0 [8/9] dev_addr=0xf8f98000 phys_addr=0x169dde000 size=4096 map_sg: dev=0000:00:17.0 [9/9] dev_addr=0xf8f99000 phys_addr=0x148351000 size=4096 Signed-off-by:
-
Jacob Pan authored
Use combined macros for_each_svm_dev() to simplify SVM device iteration and error checking. Suggested-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Jacob Pan <jacob.jun.pan@linux.intel.com> Reviewed-by:
Eric Auger <eric.auger@redhat.com> Signed-off-by:
-
Jacob Pan authored
Page responses should only be sent when last page in group (LPIG) or private data is present in the page request. This patch avoids sending invalid descriptors. Fixes: 5d308fc1 ("iommu/vt-d: Add 256-bit invalidation descriptor support") Signed-off-by:
-
Jacob Pan authored
Make use of generic IOASID code to manage PASID allocation, free, and lookup. Replace Intel specific code. Signed-off-by:
-
Jacob Pan authored
PASID allocator uses IDR which is exclusive for the end of the allocation range. There is no need to decrement pasid_max. Fixes: af395073 ("iommu/vt-d: Apply global PASID in SVA") Reported-by:
-
Jacob Pan authored
After each setup for PASID entry, related translation caches must be flushed. We can combine duplicated code into one function which is less error prone. Signed-off-by:
-
Jacob Pan authored
Add a check during SVM bind to ensure CPU and IOMMU hardware capabilities are met. Signed-off-by:
-
Jacob Pan authored
When setting up first level page tables for sharing with CPU, we need to ensure IOMMU can support no less than the levels supported by the CPU. It is not adequate, as in the current code, to set up 5-level paging in PASID entry First Level Paging Mode(FLPM) solely based on CPU. Currently, intel_pasid_setup_first_level() is only used by native SVM code which already checks paging mode matches. However, future use of this helper function may not be limited to native SVM. https://lkml.org/lkml/2019/11/18/1037 Fixes: 437f35e1 ("iommu/vt-d: Add first level page table interface") Signed-off-by:
-
Jacob Pan authored
Shared Virtual Memory(SVM) is based on a collective set of hardware features detected at runtime. There are requirements for matching CPU and IOMMU capabilities. The current code checks CPU and IOMMU feature set for SVM support but the result is never stored nor used. Therefore, SVM can still be used even when these checks failed. The consequences can be: 1. CPU uses 5-level paging mode for virtual address of 57 bits, but IOMMU can only support 4-level paging mode with 48 bits address for DMA. 2. 1GB page size is used by CPU but IOMMU does not support it. VT-d unrecoverable faults may be generated. The best solution to fix these problems is to prevent them in the first place. This patch consolidates code for checking PASID, CPU vs. IOMMU paging mode compatibility, as well as provides specific error messages for each failed checks. On sane hardware configurations, these error message shall never appear in kernel log. Signed-off-by:
-
Lu Baolu authored
This adds Kconfig option INTEL_IOMMU_SCALABLE_MODE_DEFAULT_ON to make it easier for distributions to enable or disable the Intel IOMMU scalable mode by default during kernel build. Signed-off-by:
-
- 23 Dec, 2019 2 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull vfs fixes from Al Viro: "Eric's s_inodes softlockup fixes + Jan's fix for recent regression from pipe rework" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs: call fsnotify_sb_delete after evict_inodes fs: avoid softlockups in s_inodes iterators pipe: Fix bogus dereference in iov_iter_alignment()
-
- 22 Dec, 2019 12 commits
-
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull xfs fixes from Darrick Wong: "Fix a few bugs that could lead to corrupt files, fsck complaints, and filesystem crashes: - Minor documentation fixes - Fix a file corruption due to read racing with an insert range operation. - Fix log reservation overflows when allocating large rt extents - Fix a buffer log item flags check - Don't allow administrators to mount with sunit= options that will cause later xfs_repair complaints about the root directory being suspicious because the fs geometry appeared inconsistent - Fix a non-static helper that should have been static" * tag 'xfs-5.5-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: Make the symbol 'xfs_rtalloc_log_count' static xfs: don't commit sunit/swidth updates to disk if that would cause repair failures xfs: split the sunit parameter update into two parts xfs: refactor agfl length computation function libxfs: resync with the userspace libxfs xfs: use bitops interface for buf log item AIL flag check xfs: fix log reservation overflows when allocating large rt extents xfs: stabilize insert range start boundary to avoid COW writeback race xfs: fix Sphinx documentation warning -
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 bug fixes from Ted Ts'o: "Ext4 bug fixes, including a regression fix" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: clarify impact of 'commit' mount option ext4: fix unused-but-set-variable warning in ext4_add_entry() jbd2: fix kernel-doc notation warning ext4: use RCU API in debug_print_tree ext4: validate the debug_want_extra_isize mount option at parse time ext4: reserve revoke credits in __ext4_new_inode ext4: unlock on error in ext4_expand_extra_isize() ext4: optimize __ext4_check_dir_entry() ext4: check for directory entries too close to block end ext4: fix ext4_empty_dir() for directories with holes
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "Let's try this one again, this time without the compat_ioctl changes. We've got those fixed up, but that can go out next week. This contains: - block queue flush lockdep annotation (Bart) - Type fix for bsg_queue_rq() (Bart) - Three dasd fixes (Stefan, Jan) - nbd deadlock fix (Mike) - Error handling bio user map fix (Yang) - iocost fix (Tejun) - sbitmap waitqueue addition fix that affects the kyber IO scheduler (David)" * tag 'block-5.5-20191221' of git://git.kernel.dk/linux-block: sbitmap: only queue kyber's wait callback if not already active block: fix memleak when __blk_rq_map_user_iov() is failed s390/dasd: fix typo in copyright statement s390/dasd: fix memleak in path handling error case s390/dasd/cio: Interpret ccw_device_get_mdc return value correctly block: Fix a lockdep complaint triggered by request queue flushing block: Fix the type of 'sts' in bsg_queue_rq() block: end bio with BLK_STS_AGAIN in case of non-mq devs and REQ_NOWAIT nbd: fix shutdown and recv work deadlock v2 iocost: over-budget forced IOs should schedule async delay -
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM fixes from Paolo Bonzini: "PPC: - Fix a bug where we try to do an ultracall on a system without an ultravisor KVM: - Fix uninitialised sysreg accessor - Fix handling of demand-paged device mappings - Stop spamming the console on IMPDEF sysregs - Relax mappings of writable memslots - Assorted cleanups MIPS: - Now orphan, James Hogan is stepping down x86: - MAINTAINERS change, so long Radim and thanks for all the fish - supported CPUID fixes for AMD machines without SPEC_CTRL" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: MAINTAINERS: remove Radim from KVM maintainers MAINTAINERS: Orphan KVM for MIPS kvm: x86: Host feature SSBD doesn't imply guest feature AMD_SSBD kvm: x86: Host feature SSBD doesn't imply guest feature SPEC_CTRL_SSBD KVM: PPC: Book3S HV: Don't do ultravisor calls on systems without ultravisor KVM: arm/arm64: Properly handle faulting of device mappings KVM: arm64: Ensure 'params' is initialised when looking up sys register KVM: arm/arm64: Remove excessive permission check in kvm_arch_prepare_memory_region KVM: arm64: Don't log IMP DEF sysreg traps KVM: arm64: Sanely ratelimit sysreg messages KVM: arm/arm64: vgic: Use wrapper function to lock/unlock all vcpus in kvm_vgic_create() KVM: arm/arm64: vgic: Fix potential double free dist->spis in __kvm_vgic_destroy() KVM: arm/arm64: Get rid of unused arg in cpu_init_hyp_mode() -
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull RISC-V fixes from Paul Walmsley: "Several fixes, and one cleanup, for RISC-V. Fixes: - Fix an error in a Kconfig file that resulted in an undefined Kconfig option "CONFIG_CONFIG_MMU" - Fix undefined Kconfig option "CONFIG_CONFIG_MMU" - Fix scratch register clearing in M-mode (affects nommu users) - Fix a mismerge on my part that broke the build for CONFIG_SPARSEMEM_VMEMMAP users Cleanup: - Move SiFive L2 cache-related code to drivers/soc, per request" * tag 'riscv/for-v5.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: move sifive_l2_cache.c to drivers/soc riscv: define vmemmap before pfn_to_page calls riscv: fix scratch register clearing in M-mode. riscv: Fix use of undefined config option CONFIG_CONFIG_MMU -
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Several nf_flow_table_offload fixes from Pablo Neira Ayuso, including adding a missing ipv6 match description. 2) Several heap overflow fixes in mwifiex from qize wang and Ganapathi Bhat. 3) Fix uninit value in bond_neigh_init(), from Eric Dumazet. 4) Fix non-ACPI probing of nxp-nci, from Stephan Gerhold. 5) Fix use after free in tipc_disc_rcv(), from Tuong Lien. 6) Enforce limit of 33 tail calls in mips and riscv JIT, from Paul Chaignon. 7) Multicast MAC limit test is off by one in qede, from Manish Chopra. 8) Fix established socket lookup race when socket goes from TCP_ESTABLISHED to TCP_LISTEN, because there lacks an intervening RCU grace period. From Eric Dumazet. 9) Don't send empty SKBs from tcp_write_xmit(), also from Eric Dumazet. 10) Fix active backup transition after link failure in bonding, from Mahesh Bandewar. 11) Avoid zero sized hash table in gtp driver, from Taehee Yoo. 12) Fix wrong interface passed to ->mac_link_up(), from Russell King. 13) Fix DSA egress flooding settings in b53, from Florian Fainelli. 14) Memory leak in gmac_setup_txqs(), from Navid Emamdoost. 15) Fix double free in dpaa2-ptp code, from Ioana Ciornei. 16) Reject invalid MTU values in stmmac, from Jose Abreu. 17) Fix refcount leak in error path of u32 classifier, from Davide Caratti. 18) Fix regression causing iwlwifi firmware crashes on boot, from Anders Kaseorg. 19) Fix inverted return value logic in llc2 code, from Chan Shu Tak. 20) Disable hardware GRO when XDP is attached to qede, frm Manish Chopra. 21) Since we encode state in the low pointer bits, dst metrics must be at least 4 byte aligned, which is not necessarily true on m68k. Add annotations to fix this, from Geert Uytterhoeven. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (160 commits) sfc: Include XDP packet headroom in buffer step size. sfc: fix channel allocation with brute force net: dst: Force 4-byte alignment of dst_metrics selftests: pmtu: fix init mtu value in description hv_netvsc: Fix unwanted rx_table reset net: phy: ensure that phy IDs are correctly typed mod_devicetable: fix PHY module format qede: Disable hardware gro when xdp prog is installed net: ena: fix issues in setting interrupt moderation params in ethtool net: ena: fix default tx interrupt moderation interval net/smc: unregister ib devices in reboot_event net: stmmac: platform: Fix MDIO init for platforms without PHY llc2: Fix return statement of llc_stat_ev_rx_null_dsap_xid_c (and _test_c) net: hisilicon: Fix a BUG trigered by wrong bytes_compl net: dsa: ksz: use common define for tag len s390/qeth: don't return -ENOTSUPP to userspace s390/qeth: fix promiscuous mode after reset s390/qeth: handle error due to unsupported transport mode cxgb4: fix refcount init for TC-MQPRIO offload tc-testing: initial tdc selftests for cls_u32 ... -
Jan Stancek authored
LTP pipeio_1 test is hanging with v5.5-rc2-385-gb8e382a1, with read side observing empty pipe and sleeping and write side running out of space and then sleeping as well. In this scenario there are 5 writers and 1 reader. Problem is that after pipe_write() reacquires pipe lock, it re-checks for empty pipe with potentially stale 'head' and doesn't wake up read side anymore. pipe->tail can advance beyond 'head', because there are multiple writers. Use pipe->head for empty pipe check after reacquiring lock to observe current state. Testing: With patch, LTP pipeio_1 ran successfully in loop for 1 hour. Without patch it hanged within a minute. Fixes: 1b6b26ae ("pipe: fix and clarify pipe write wakeup logic") Reported-by:
Rachel Sibley <rasibley@redhat.com> Signed-off-by:
Jan Stancek <jstancek@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Paolo Bonzini authored
Merge tag 'kvm-ppc-fixes-5.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into kvm-master PPC KVM fix for 5.5 - Fix a bug where we try to do an ultracall on a system without an ultravisor.
-
Paolo Bonzini authored
Radim's kernel.org email is bouncing, which I take as a signal that he is not really able to deal with KVM at this time. Make MAINTAINERS match the effective value of KVM's bus factor. Signed-off-by:Paolo Bonzini <pbonzini@redhat.com>
-
James Hogan authored
I haven't been active for 18 months, and don't have the hardware set up to test KVM for MIPS, so mark it as orphaned and remove myself as maintainer. Hopefully somebody from MIPS can pick this up. Signed-off-by:
James Hogan <jhogan@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: Paul Burton <paulburton@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: kvm@vger.kernel.org Cc: linux-mips@vger.kernel.org Signed-off-by:
-
Jan Kara authored
The description of 'commit' mount option dates back to ext3 times. Update the description to match current meaning for ext4. Reported-by:
Paul Richards <paul.richards@gmail.com> Signed-off-by:
Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20191218111210.14161-1-jack@suse.czSigned-off-by:
Theodore Ts'o <tytso@mit.edu>
-
Yunfeng Ye authored
Warning is found when compile with "-Wunused-but-set-variable": fs/ext4/namei.c: In function ‘ext4_add_entry’: fs/ext4/namei.c:2167:23: warning: variable ‘sbi’ set but not used [-Wunused-but-set-variable] struct ext4_sb_info *sbi; ^~~ Fix this by moving the variable @sbi under CONFIG_UNICODE. Signed-off-by:Yunfeng Ye <yeyunfeng@huawei.com> Reviewed-by:
Ritesh Harjani <riteshh@linux.ibm.com> Link: https://lore.kernel.org/r/cb5eb904-224a-9701-c38f-cb23514b1fff@huawei.comSigned-off-by:
-
- 21 Dec, 2019 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull tracing fixes from Steven Rostedt: - Fix memory leak on error path of process_system_preds() - Lock inversion fix with updating tgid recording option - Fix histogram compare function on big endian machines - Fix histogram trigger function on big endian machines - Make trace_printk() irq sync on init for kprobe selftest correctness * tag 'trace-v5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Fix endianness bug in histogram trigger samples/trace_printk: Wait for IRQ work to finish tracing: Fix lock inversion in trace_event_enable_tgid_record() tracing: Have the histogram compare functions convert to u64 first tracing: Avoid memory leak in process_system_preds()
-
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimmLinus Torvalds authored
Pull libnvdimm fix from Dan Williams: "A minor regression fix. The libnvdimm unit tests were expecting to mock calls to ioremap_nocache() which disappeared in v5.5-rc1. This fix has appeared in -next and collided with some cleanups that Christoph has planned for v5.6, but he will fix up his branch once this goes in. Summary: - Restore the operation of the libnvdimm unit tests after the removal of ioremap_nocache()" * tag 'libnvdimm-fix-5.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: tools/testing/nvdimm: Fix mock support for ioremap -
Sven Schnelle authored
At least on PA-RISC and s390 synthetic histogram triggers are failing selftests because trace_event_raw_event_synth() always writes a 64 bit values, but the reader expects a field->size sized value. On little endian machines this doesn't hurt, but on big endian this makes the reader always read zero values. Link: http://lore.kernel.org/linux-trace-devel/20191218074427.96184-4-svens@linux.ibm.com Cc: stable@vger.kernel.org Fixes: 4b147936 ("tracing: Add support for 'synthetic' events") Acked-by:
Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by:
Sven Schnelle <svens@linux.ibm.com> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Sven Schnelle authored
trace_printk schedules work via irq_work_queue(), but doesn't wait until it was processed. The kprobe_module.tc testcase does: :;: "Load module again, which means the event1 should be recorded";: modprobe trace-printk grep "event1:" trace so the grep which checks the trace file might run before the irq work was processed. Fix this by adding a irq_work_sync(). Link: http://lore.kernel.org/linux-trace-devel/20191218074427.96184-3-svens@linux.ibm.com Cc: stable@vger.kernel.org Fixes: af2a0750 ("selftests/ftrace: Improve kprobe on module testcase to load/unload module") Signed-off-by:
-
