- 27 Dec, 2019 4 commits
-
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull io_uring fixes from Jens Axboe: - Removal of now unused busy wqe list (Hillf) - Add cond_resched() to io-wq work processing (Hillf) - And then the series that I hinted at from last week, which removes the sqe from the io_kiocb and keeps all sqe handling on the prep side. This guarantees that an opcode can't do the wrong thing and read the sqe more than once. This is unchanged from last week, no issues have been observed with this in testing. Hence I really think we should fold this into 5.5. * tag 'io_uring-5.5-20191226' of git://git.kernel.dk/linux-block: io-wq: add cond_resched() to worker thread io-wq: remove unused busy list from io_sqe io_uring: pass in 'sqe' to the prep handlers io_uring: standardize the prep methods io_uring: read 'count' for IORING_OP_TIMEOUT in prep handler io_uring: move all prep state for IORING_OP_{SEND,RECV}_MGS to prep handler io_uring: move all prep state for IORING_OP_CONNECT to prep handler io_uring: add and use struct io_rw for read/writes io_uring: use u64_to_user_ptr() consistently
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull libata fixes from Jens Axboe: "Two things in here: - First half of a series that fixes ahci_brcm, also marked for stable. The other part of the series is going into 5.6 (Florian) - sata_nv regression fix that is also marked for stable (Sascha)" * tag 'libata-5.5-20191226' of git://git.kernel.dk/linux-block: ata: ahci_brcm: Add missing clock management during recovery ata: ahci_brcm: BCM7425 AHCI requires AHCI_HFLAG_DELAY_ENGINE ata: ahci_brcm: Fix AHCI resources management ata: libahci_platform: Export again ahci_platform_<en/dis>able_phys() libata: Fix retrieving of active qcs
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "Only thing here are the changes from Arnd from last week, which now have the appropriate header include to ensure they actually compile if COMPAT is enabled" * tag 'block-5.5-20191226' of git://git.kernel.dk/linux-block: compat_ioctl: block: handle Persistent Reservations compat_ioctl: block: handle add zone open, close and finish ioctl compat_ioctl: block: handle BLKGETZONESZ/BLKGETNRZONES compat_ioctl: block: handle BLKREPORTZONE/BLKRESETZONE pktcdvd: fix regression on 64-bit architectures
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpioLinus Torvalds authored
Pull GPIO fixes from Linus Walleij: "A set of fixes for the v5.5 series: - Fix the build for the Xtensa driver. - Make sure to set up the parent device for mpc8xxx. - Clarify the look-up error message. - Fix the usage of the line direction in the mockup device. - Fix a type warning on the Aspeed driver. - Remove the pointless __exit annotation on the xgs-iproc which is causing a compilation problem. - Fix up emultation of open drain outputs .get_direction() - Fix the IRQ callbacks on the PCA953xx to use bitops and work properly. - Fix the Kconfig on the Tegra driver" * tag 'gpio-v5.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: tegra186: Allow building on Tegra194-only configurations gpio: pca953x: Switch to bitops in IRQ callbacks gpiolib: fix up emulated open drain outputs MAINTAINERS: Append missed file to the database gpio: xgs-iproc: remove __exit annotation for iproc_gpio_remove gpio: aspeed: avoid return type warning gpio: mockup: Fix usage of new GPIO_LINE_DIRECTION gpio: Fix error message on out-of-range GPIO in lookup table gpio: mpc8xxx: Add platform device to gpiochip->parent gpio: xtensa: fix driver build
-
- 26 Dec, 2019 5 commits
-
-
Florian Fainelli authored
The downstream implementation of ahci_brcm.c did contain clock management recovery, but until recently, did that outside of the libahci_platform helpers and this was unintentionally stripped out while forward porting the patch upstream. Add the missing clock management during recovery and sleep for 10 milliseconds per the design team recommendations to ensure the SATA PHY controller and AFE have been fully quiesced. Fixes: eb73390a ("ata: ahci_brcm: Recover from failures to identify devices") Cc: stable@vger.kernel.org Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
Florian Fainelli authored
Set AHCI_HFLAG_DELAY_ENGINE for the BCM7425 AHCI controller thus making it conforming to the 'strict' AHCI implementation which this controller is based on. This solves long link establishment with specific hard drives (e.g.: Seagate ST1000VM002-9ZL1 SC12) that would otherwise have to complete the error recovery handling before finally establishing a succesful SATA link at the desired speed. We re-order the hpriv->flags assignment to also remove the NONCQ quirk since we can set the flag directly. Fixes: 9586114cf1e9 ("ata: ahci_brcmstb: add support MIPS-based platforms") Fixes: 423be77daabe ("ata: ahci_brcmstb: add quirk for broken ncq") Cc: stable@vger.kernel.org Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
Florian Fainelli authored
The AHCI resources management within ahci_brcm.c is a little convoluted, largely because it historically had a dedicated clock that was managed within this file in the downstream tree. Once brough upstream though, the clock was left to be managed by libahci_platform.c which is entirely appropriate. This patch series ensures that the AHCI resources are fetched and enabled before any register access is done, thus avoiding bus errors on platforms which clock gate the controller by default. As a result we need to re-arrange the suspend() and resume() functions in order to avoid accessing registers after the clocks have been turned off respectively before the clocks have been turned on. Finally, we can refactor brcm_ahci_get_portmask() in order to fetch the number of ports from hpriv->mmio which is now accessible without jumping through hoops like we used to do. The commit pointed in the Fixes tag is both old and new enough not to require major headaches for backporting of this patch. Fixes: eba68f82 ("ata: ahci_brcmstb: rename to support across Broadcom SoC's") Cc: stable@vger.kernel.org Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
Florian Fainelli authored
This reverts commit 6bb86fef ("libahci_platform: Staticize ahci_platform_<en/dis>able_phys()") we are going to need ahci_platform_{enable,disable}_phys() in a subsequent commit for ahci_brcm.c in order to properly control the PHY initialization order. Also make sure the function prototypes are declared in include/linux/ahci_platform.h as a result. Cc: stable@vger.kernel.org Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
Sascha Hauer authored
ata_qc_complete_multiple() is called with a mask of the still active tags. mv_sata doesn't have this information directly and instead calculates the still active tags from the started tags (ap->qc_active) and the finished tags as (ap->qc_active ^ done_mask) Since 28361c40 the hw_tag and tag are no longer the same and the equation is no longer valid. In ata_exec_internal_sg() ap->qc_active is initialized as 1ULL << ATA_TAG_INTERNAL, but in hardware tag 0 is started and this will be in done_mask on completion. ap->qc_active ^ done_mask becomes 0x100000000 ^ 0x1 = 0x100000001 and thus tag 0 used as the internal tag will never be reported as completed. This is fixed by introducing ata_qc_get_active() which returns the active hardware tags and calling it where appropriate. This is tested on mv_sata, but sata_fsl and sata_nv suffer from the same problem. There is another case in sata_nv that most likely needs fixing as well, but this looks a little different, so I wasn't confident enough to change that. Fixes: 28361c40 ("libata: add extra internal command") Cc: stable@vger.kernel.org Tested-by:
Pali Rohár <pali.rohar@gmail.com> Signed-off-by:
Sascha Hauer <s.hauer@pengutronix.de> Add missing export of ata_qc_get_active(), as per Pali. Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
- 24 Dec, 2019 1 commit
-
-
Hillf Danton authored
Reschedule the current IO worker to cut the risk that it is becoming a cpu hog. Signed-off-by:
Hillf Danton <hdanton@sina.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
- 23 Dec, 2019 3 commits
-
-
Hillf Danton authored
Commit e61df66c ("io-wq: ensure free/busy list browsing see all items") added a list for io workers in addition to the free and busy lists, not only making worker walk cleaner, but leaving the busy list unused. Let's remove it. Signed-off-by:
Hillf Danton <hdanton@sina.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull vfs fixes from Al Viro: "Eric's s_inodes softlockup fixes + Jan's fix for recent regression from pipe rework" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs: call fsnotify_sb_delete after evict_inodes fs: avoid softlockups in s_inodes iterators pipe: Fix bogus dereference in iov_iter_alignment()
-
- 22 Dec, 2019 12 commits
-
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull xfs fixes from Darrick Wong: "Fix a few bugs that could lead to corrupt files, fsck complaints, and filesystem crashes: - Minor documentation fixes - Fix a file corruption due to read racing with an insert range operation. - Fix log reservation overflows when allocating large rt extents - Fix a buffer log item flags check - Don't allow administrators to mount with sunit= options that will cause later xfs_repair complaints about the root directory being suspicious because the fs geometry appeared inconsistent - Fix a non-static helper that should have been static" * tag 'xfs-5.5-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: Make the symbol 'xfs_rtalloc_log_count' static xfs: don't commit sunit/swidth updates to disk if that would cause repair failures xfs: split the sunit parameter update into two parts xfs: refactor agfl length computation function libxfs: resync with the userspace libxfs xfs: use bitops interface for buf log item AIL flag check xfs: fix log reservation overflows when allocating large rt extents xfs: stabilize insert range start boundary to avoid COW writeback race xfs: fix Sphinx documentation warning
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 bug fixes from Ted Ts'o: "Ext4 bug fixes, including a regression fix" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: clarify impact of 'commit' mount option ext4: fix unused-but-set-variable warning in ext4_add_entry() jbd2: fix kernel-doc notation warning ext4: use RCU API in debug_print_tree ext4: validate the debug_want_extra_isize mount option at parse time ext4: reserve revoke credits in __ext4_new_inode ext4: unlock on error in ext4_expand_extra_isize() ext4: optimize __ext4_check_dir_entry() ext4: check for directory entries too close to block end ext4: fix ext4_empty_dir() for directories with holes
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "Let's try this one again, this time without the compat_ioctl changes. We've got those fixed up, but that can go out next week. This contains: - block queue flush lockdep annotation (Bart) - Type fix for bsg_queue_rq() (Bart) - Three dasd fixes (Stefan, Jan) - nbd deadlock fix (Mike) - Error handling bio user map fix (Yang) - iocost fix (Tejun) - sbitmap waitqueue addition fix that affects the kyber IO scheduler (David)" * tag 'block-5.5-20191221' of git://git.kernel.dk/linux-block: sbitmap: only queue kyber's wait callback if not already active block: fix memleak when __blk_rq_map_user_iov() is failed s390/dasd: fix typo in copyright statement s390/dasd: fix memleak in path handling error case s390/dasd/cio: Interpret ccw_device_get_mdc return value correctly block: Fix a lockdep complaint triggered by request queue flushing block: Fix the type of 'sts' in bsg_queue_rq() block: end bio with BLK_STS_AGAIN in case of non-mq devs and REQ_NOWAIT nbd: fix shutdown and recv work deadlock v2 iocost: over-budget forced IOs should schedule async delay
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM fixes from Paolo Bonzini: "PPC: - Fix a bug where we try to do an ultracall on a system without an ultravisor KVM: - Fix uninitialised sysreg accessor - Fix handling of demand-paged device mappings - Stop spamming the console on IMPDEF sysregs - Relax mappings of writable memslots - Assorted cleanups MIPS: - Now orphan, James Hogan is stepping down x86: - MAINTAINERS change, so long Radim and thanks for all the fish - supported CPUID fixes for AMD machines without SPEC_CTRL" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: MAINTAINERS: remove Radim from KVM maintainers MAINTAINERS: Orphan KVM for MIPS kvm: x86: Host feature SSBD doesn't imply guest feature AMD_SSBD kvm: x86: Host feature SSBD doesn't imply guest feature SPEC_CTRL_SSBD KVM: PPC: Book3S HV: Don't do ultravisor calls on systems without ultravisor KVM: arm/arm64: Properly handle faulting of device mappings KVM: arm64: Ensure 'params' is initialised when looking up sys register KVM: arm/arm64: Remove excessive permission check in kvm_arch_prepare_memory_region KVM: arm64: Don't log IMP DEF sysreg traps KVM: arm64: Sanely ratelimit sysreg messages KVM: arm/arm64: vgic: Use wrapper function to lock/unlock all vcpus in kvm_vgic_create() KVM: arm/arm64: vgic: Fix potential double free dist->spis in __kvm_vgic_destroy() KVM: arm/arm64: Get rid of unused arg in cpu_init_hyp_mode()
-
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull RISC-V fixes from Paul Walmsley: "Several fixes, and one cleanup, for RISC-V. Fixes: - Fix an error in a Kconfig file that resulted in an undefined Kconfig option "CONFIG_CONFIG_MMU" - Fix undefined Kconfig option "CONFIG_CONFIG_MMU" - Fix scratch register clearing in M-mode (affects nommu users) - Fix a mismerge on my part that broke the build for CONFIG_SPARSEMEM_VMEMMAP users Cleanup: - Move SiFive L2 cache-related code to drivers/soc, per request" * tag 'riscv/for-v5.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: move sifive_l2_cache.c to drivers/soc riscv: define vmemmap before pfn_to_page calls riscv: fix scratch register clearing in M-mode. riscv: Fix use of undefined config option CONFIG_CONFIG_MMU
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Several nf_flow_table_offload fixes from Pablo Neira Ayuso, including adding a missing ipv6 match description. 2) Several heap overflow fixes in mwifiex from qize wang and Ganapathi Bhat. 3) Fix uninit value in bond_neigh_init(), from Eric Dumazet. 4) Fix non-ACPI probing of nxp-nci, from Stephan Gerhold. 5) Fix use after free in tipc_disc_rcv(), from Tuong Lien. 6) Enforce limit of 33 tail calls in mips and riscv JIT, from Paul Chaignon. 7) Multicast MAC limit test is off by one in qede, from Manish Chopra. 8) Fix established socket lookup race when socket goes from TCP_ESTABLISHED to TCP_LISTEN, because there lacks an intervening RCU grace period. From Eric Dumazet. 9) Don't send empty SKBs from tcp_write_xmit(), also from Eric Dumazet. 10) Fix active backup transition after link failure in bonding, from Mahesh Bandewar. 11) Avoid zero sized hash table in gtp driver, from Taehee Yoo. 12) Fix wrong interface passed to ->mac_link_up(), from Russell King. 13) Fix DSA egress flooding settings in b53, from Florian Fainelli. 14) Memory leak in gmac_setup_txqs(), from Navid Emamdoost. 15) Fix double free in dpaa2-ptp code, from Ioana Ciornei. 16) Reject invalid MTU values in stmmac, from Jose Abreu. 17) Fix refcount leak in error path of u32 classifier, from Davide Caratti. 18) Fix regression causing iwlwifi firmware crashes on boot, from Anders Kaseorg. 19) Fix inverted return value logic in llc2 code, from Chan Shu Tak. 20) Disable hardware GRO when XDP is attached to qede, frm Manish Chopra. 21) Since we encode state in the low pointer bits, dst metrics must be at least 4 byte aligned, which is not necessarily true on m68k. Add annotations to fix this, from Geert Uytterhoeven. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (160 commits) sfc: Include XDP packet headroom in buffer step size. sfc: fix channel allocation with brute force net: dst: Force 4-byte alignment of dst_metrics selftests: pmtu: fix init mtu value in description hv_netvsc: Fix unwanted rx_table reset net: phy: ensure that phy IDs are correctly typed mod_devicetable: fix PHY module format qede: Disable hardware gro when xdp prog is installed net: ena: fix issues in setting interrupt moderation params in ethtool net: ena: fix default tx interrupt moderation interval net/smc: unregister ib devices in reboot_event net: stmmac: platform: Fix MDIO init for platforms without PHY llc2: Fix return statement of llc_stat_ev_rx_null_dsap_xid_c (and _test_c) net: hisilicon: Fix a BUG trigered by wrong bytes_compl net: dsa: ksz: use common define for tag len s390/qeth: don't return -ENOTSUPP to userspace s390/qeth: fix promiscuous mode after reset s390/qeth: handle error due to unsupported transport mode cxgb4: fix refcount init for TC-MQPRIO offload tc-testing: initial tdc selftests for cls_u32 ...
-
Jan Stancek authored
LTP pipeio_1 test is hanging with v5.5-rc2-385-gb8e382a1, with read side observing empty pipe and sleeping and write side running out of space and then sleeping as well. In this scenario there are 5 writers and 1 reader. Problem is that after pipe_write() reacquires pipe lock, it re-checks for empty pipe with potentially stale 'head' and doesn't wake up read side anymore. pipe->tail can advance beyond 'head', because there are multiple writers. Use pipe->head for empty pipe check after reacquiring lock to observe current state. Testing: With patch, LTP pipeio_1 ran successfully in loop for 1 hour. Without patch it hanged within a minute. Fixes: 1b6b26ae ("pipe: fix and clarify pipe write wakeup logic") Reported-by:
Rachel Sibley <rasibley@redhat.com> Signed-off-by:
Jan Stancek <jstancek@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Paolo Bonzini authored
Merge tag 'kvm-ppc-fixes-5.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into kvm-master PPC KVM fix for 5.5 - Fix a bug where we try to do an ultracall on a system without an ultravisor.
-
Paolo Bonzini authored
Radim's kernel.org email is bouncing, which I take as a signal that he is not really able to deal with KVM at this time. Make MAINTAINERS match the effective value of KVM's bus factor. Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
James Hogan authored
I haven't been active for 18 months, and don't have the hardware set up to test KVM for MIPS, so mark it as orphaned and remove myself as maintainer. Hopefully somebody from MIPS can pick this up. Signed-off-by:
James Hogan <jhogan@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: Paul Burton <paulburton@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: kvm@vger.kernel.org Cc: linux-mips@vger.kernel.org Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Jan Kara authored
The description of 'commit' mount option dates back to ext3 times. Update the description to match current meaning for ext4. Reported-by:
Paul Richards <paul.richards@gmail.com> Signed-off-by:
Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20191218111210.14161-1-jack@suse.czSigned-off-by:
Theodore Ts'o <tytso@mit.edu>
-
Yunfeng Ye authored
Warning is found when compile with "-Wunused-but-set-variable": fs/ext4/namei.c: In function ‘ext4_add_entry’: fs/ext4/namei.c:2167:23: warning: variable ‘sbi’ set but not used [-Wunused-but-set-variable] struct ext4_sb_info *sbi; ^~~ Fix this by moving the variable @sbi under CONFIG_UNICODE. Signed-off-by:
Yunfeng Ye <yeyunfeng@huawei.com> Reviewed-by:
Ritesh Harjani <riteshh@linux.ibm.com> Link: https://lore.kernel.org/r/cb5eb904-224a-9701-c38f-cb23514b1fff@huawei.comSigned-off-by:
Theodore Ts'o <tytso@mit.edu>
-
- 21 Dec, 2019 15 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull tracing fixes from Steven Rostedt: - Fix memory leak on error path of process_system_preds() - Lock inversion fix with updating tgid recording option - Fix histogram compare function on big endian machines - Fix histogram trigger function on big endian machines - Make trace_printk() irq sync on init for kprobe selftest correctness * tag 'trace-v5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Fix endianness bug in histogram trigger samples/trace_printk: Wait for IRQ work to finish tracing: Fix lock inversion in trace_event_enable_tgid_record() tracing: Have the histogram compare functions convert to u64 first tracing: Avoid memory leak in process_system_preds()
-
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimmLinus Torvalds authored
Pull libnvdimm fix from Dan Williams: "A minor regression fix. The libnvdimm unit tests were expecting to mock calls to ioremap_nocache() which disappeared in v5.5-rc1. This fix has appeared in -next and collided with some cleanups that Christoph has planned for v5.6, but he will fix up his branch once this goes in. Summary: - Restore the operation of the libnvdimm unit tests after the removal of ioremap_nocache()" * tag 'libnvdimm-fix-5.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: tools/testing/nvdimm: Fix mock support for ioremap
-
Sven Schnelle authored
At least on PA-RISC and s390 synthetic histogram triggers are failing selftests because trace_event_raw_event_synth() always writes a 64 bit values, but the reader expects a field->size sized value. On little endian machines this doesn't hurt, but on big endian this makes the reader always read zero values. Link: http://lore.kernel.org/linux-trace-devel/20191218074427.96184-4-svens@linux.ibm.com Cc: stable@vger.kernel.org Fixes: 4b147936 ("tracing: Add support for 'synthetic' events") Acked-by:
Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by:
Sven Schnelle <svens@linux.ibm.com> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Sven Schnelle authored
trace_printk schedules work via irq_work_queue(), but doesn't wait until it was processed. The kprobe_module.tc testcase does: :;: "Load module again, which means the event1 should be recorded";: modprobe trace-printk grep "event1:" trace so the grep which checks the trace file might run before the irq work was processed. Fix this by adding a irq_work_sync(). Link: http://lore.kernel.org/linux-trace-devel/20191218074427.96184-3-svens@linux.ibm.com Cc: stable@vger.kernel.org Fixes: af2a0750 ("selftests/ftrace: Improve kprobe on module testcase to load/unload module") Signed-off-by:
Sven Schnelle <svens@linux.ibm.com> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Prateek Sood authored
Task T2 Task T3 trace_options_core_write() subsystem_open() mutex_lock(trace_types_lock) mutex_lock(event_mutex) set_tracer_flag() trace_event_enable_tgid_record() mutex_lock(trace_types_lock) mutex_lock(event_mutex) This gives a circular dependency deadlock between trace_types_lock and event_mutex. To fix this invert the usage of trace_types_lock and event_mutex in trace_options_core_write(). This keeps the sequence of lock usage consistent. Link: http://lkml.kernel.org/r/0101016eef175e38-8ca71caf-a4eb-480d-a1e6-6f0bbc015495-000000@us-west-2.amazonses.com Cc: stable@vger.kernel.org Fixes: d914ba37 ("tracing: Add support for recording tgid of tasks") Signed-off-by:
Prateek Sood <prsood@codeaurora.org> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 fixes from Vasily Gorbik: - Fix unwinding from irq context of interrupted user process. - Add purgatory build missing symbols check. That helped to uncover and fix missing symbols when built with kasan support enabled. - Couple of ftrace fixes. Avoid broken stack trace and fix recursion loop in function_graph tracer. * tag 's390-5.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/ftrace: save traced function caller s390/unwind: stop gracefully at user mode pt_regs in irq stack s390/purgatory: do not build purgatory with kcov, kasan and friends s390/purgatory: Make sure we fail the build if purgatory has missing symbols s390/ftrace: fix endless recursion in function_graph tracer
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Ingo Molnar: "Misc fixes: a (rare) PSI crash fix, a CPU affinity related balancing fix, and a toning down of active migration attempts" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/cfs: fix spurious active migration sched/fair: Fix find_idlest_group() to handle CPU affinity psi: Fix a division error in psi poll() sched/psi: Fix sampling error and rare div0 crashes with cgroups and high uptime
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Ingo Molnar: "Misc fixes: a BTS fix, a PT NMI handling fix, a PMU sysfs fix and an SRCU annotation" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Add SRCU annotation for pmus list walk perf/x86/intel: Fix PT PMI handling perf/x86/intel/bts: Fix the use of page_private() perf/x86: Fix potential out-of-bounds access
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - fix warning in out-of-tree 'make clean' - add READELF variable to the top Makefile - fix broken builds when LINUX_COMPILE_BY contains a backslash - fix build warning in kallsyms - fix NULL pointer access in expr_eq() in Kconfig - fix missing dependency on rsync in deb-pkg build - remove ---help--- from documentation - fix misleading documentation about directory descending * tag 'kbuild-fixes-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: clarify the difference between obj-y and obj-m w.r.t. descending kconfig: remove ---help--- from documentation scripts: package: mkdebian: add missing rsync dependency kconfig: don't crash on NULL expressions in expr_eq() scripts/kallsyms: fix offset overflow of kallsyms_relative_base mkcompile_h: use printf for LINUX_COMPILE_BY mkcompile_h: git rid of UTS_TRUNCATE from LINUX_COMPILE_{BY,HOST} x86/boot: kbuild: allow readelf executable to be specified kbuild: fix 'No such file or directory' warning when cleaning
-
Masahiro Yamada authored
Kbuild descends into a directory by either 'y' or 'm', but there is an important difference. Kbuild combines the built-in objects into built-in.a in each directory. The built-in.a in the directory visited by obj-y is merged into the built-in.a in the parent directory. This merge happens recursively when Kbuild is ascending back towards the top directory, then built-in objects are linked into vmlinux eventually. This works properly only when the Makefile specifying obj-y is reachable by the chain of obj-y. On the other hand, Kbuild does not take built-in.a from the directory visited by obj-m. This it, all the objects in that directory are supposed to be modular. If Kbuild descends into a directory by obj-m, but the Makefile in the sub-directory specifies obj-y, those objects are just left orphan. The current statement "Kbuild only uses this information to decide that it needs to visit the directory" is misleading. Clarify the difference. Reported-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org> Reviewed-by:
Johan Hovold <johan@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linuxLinus Torvalds authored
Pul parisc fixes from Helge Deller: "Two build error fixes, one for the soft_offline_page() parameter change and one for a specific KEXEC/KEXEC_FILE configuration, as well as a compiler and a linker warning fix" * 'parisc-5.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Fix compiler warnings in debug_core.c parisc: soft_offline_page() now takes the pfn parisc: add missing __init annotation parisc: fix compilation when KEXEC=n and KEXEC_FILE=y
-
Arnd Bergmann authored
These were added to blkdev_ioctl() in linux-5.5 but not blkdev_compat_ioctl, so add them now. Cc: <stable@vger.kernel.org> # v4.4+ Fixes: bbd3e064 ("block: add an API for Persistent Reservations") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Fold in followup patch from Arnd with missing pr.h header include. Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
Arnd Bergmann authored
These were added to blkdev_ioctl() in linux-5.5 but not blkdev_compat_ioctl, so add them now. Fixes: e876df1f ("block: add zone open, close and finish ioctl support") Reviewed-by:
Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
Arnd Bergmann authored
These were added to blkdev_ioctl() in v4.20 but not blkdev_compat_ioctl, so add them now. Cc: <stable@vger.kernel.org> # v4.20+ Fixes: 72cd8757 ("block: Introduce BLKGETZONESZ ioctl") Fixes: 65e4e3ee ("block: Introduce BLKGETNRZONES ioctl") Reviewed-by:
Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
Arnd Bergmann authored
These were added to blkdev_ioctl() but not blkdev_compat_ioctl, so add them now. Cc: <stable@vger.kernel.org> # v4.10+ Fixes: 3ed05a98 ("blk-zoned: implement ioctls") Reviewed-by:
Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-