- 13 Apr, 2018 40 commits
-
-
linzhang authored
[ Upstream commit 64df6d52 ] The function x25_init is not properly unregister related resources on error handler.It is will result in kernel oops if x25_init init failed, so add properly unregister call on error handler. Also, i adjust the coding style and make x25_register_sysctl properly return failure. Signed-off-by:
linzhang <xiaolou4617@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alan Stern authored
[ Upstream commit 4b309f1c ] In the ene_usb6250 sub-driver for usb-storage, the ene_transport() routine is supposed to initialize the driver before executing the current command, if the initialization has not already been performed. However, a bug in the routine causes it to skip the command after doing the initialization. Also, the routine does not return an appropriate error code if either the initialization or the command fails. As a result of the first bug, the first command (a SCSI INQUIRY) is not carried out. The results can be seen in the system log, in the form of a warning message and empty or garbage INQUIRY data: Apr 18 22:40:08 notebook2 kernel: scsi host6: scsi scan: INQUIRY result too short (5), using 36 Apr 18 22:40:08 notebook2 kernel: scsi 6:0:0:0: Direct-Access PQ: 0 ANSI: 0 This patch fixes both errors. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by:
Andreas Hartmann <andihartmann@01019freenet.de> Signed-off-by:
-
Petr Cvek authored
[ Upstream commit e3b4d10c ] The conversion from soc_camera omitted a correct handling of the clock gating for a sensor. When the pxa_camera driver module was removed it tried to unregister clk, but this caused a similar warning: WARNING: CPU: 0 PID: 6740 at drivers/media/v4l2-core/v4l2-clk.c:278 v4l2_clk_unregister(): Refusing to unregister ref-counted 0-0030 clock! The clock was at time still refcounted by the sensor driver. Before the removing of the pxa_camera the clock must be dropped by the sensor driver. This should be triggered by v4l2_async_notifier_unregister() call which removes sensor driver module too, calls unbind() function and then tries to probe sensor driver again. Inside unbind() we can safely unregister the v4l2 clock as the sensor driver got removed. The original v4l2_clk_unregister() should be put inside test as the clock can be already unregistered from unbind(). If there was not any bound sensor the clock is still present. The codepath is practically a copy from the old soc_camera. The bug was tested with a pxa_camera+ov9640 combination during the conversion of the ov9640 from the soc_camera. Signed-off-by:
Petr Cvek <petr.cvek@tul.cz> Tested-by:
Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
Jisheng Zhang authored
[ Upstream commit c4a0bbbd ] If ci_hdrc_host_init() or ci_hdrc_gadget_init() returns error and the error != -ENXIO, as Peter pointed out, "it stands for initialization for host or gadget has failed", so we'd better return failure rather continue. And before destroying the otg, i.e ci_hdrc_otg_destroy(ci), we should also check ci->roles[CI_ROLE_GADGET]. Signed-off-by:
Jisheng Zhang <jszhang@marvell.com> Signed-off-by:
Peter Chen <peter.chen@nxp.com> Signed-off-by:
-
Sugar Zhang authored
[ Upstream commit 9d420e9b ] Refer to Chapter 5.3.2 of rk3229 TRM, we can see that GPIO1A[2,4,5] using RK_FUNC_2 not RK_FUNC_1. This patch fixes it. Signed-off-by:
Sugar Zhang <sugar.zhang@rock-chips.com> Signed-off-by:
Frank Wang <frank.wang@rock-chips.com> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Signed-off-by:
-
Ihar Hrachyshka authored
[ Upstream commit 23d268eb ] When arp_accept is 1, gratuitous ARPs are supposed to override matching entries irrespective of whether they arrive during locktime. This was implemented in commit 56022a8f ("ipv4: arp: update neighbour address when a gratuitous arp is received and arp_accept is set") There is a glitch in the patch though. RFC 2002, section 4.6, "ARP, Proxy ARP, and Gratuitous ARP", defines gratuitous ARPs so that they can be either of Request or Reply type. Those Reply gratuitous ARPs can be triggered with standard tooling, for example, arping -A option does just that. This patch fixes the glitch, making both Request and Reply flavours of gratuitous ARPs to behave identically. As per RFC, if gratuitous ARPs are of Reply type, their Target Hardware Address field should also be set to the link-layer address to which this cache entry should be updated. The field is present in ARP over Ethernet but not in IEEE 1394. In this patch, I don't consider any broadcasted ARP replies as gratuitous if the field is not present, to conform the standard. It's not clear whether there is such a thing for IEEE 1394 as a gratuitous ARP reply; until it's cleared up, we will ignore such broadcasts. Note that they will still update existing ARP cache entries, assuming they arrive out of locktime time interval. Signed-off-by:
Ihar Hrachyshka <ihrachys@redhat.com> Signed-off-by:
-
Ihar Hrachyshka authored
[ Upstream commit 77d71233 ] It's a common practice to send gratuitous ARPs after moving an IP address to another device to speed up healing of a service. To fulfill service availability constraints, the timing of network peers updating their caches to point to a new location of an IP address can be particularly important. Sometimes neigh_update calls won't touch neither lladdr nor state, for example if an update arrives in locktime interval. The neigh->updated value is tested by the protocol specific neigh code, which in turn will influence whether NEIGH_UPDATE_F_OVERRIDE gets set in the call to neigh_update() or not. As a result, we may effectively ignore the update request, bailing out of touching the neigh entry, except that we still bump its timestamps inside neigh_update. This may be a problem for updates arriving in quick succession. For example, consider the following scenario: A service is moved to another device with its IP address. The new device sends three gratuitous ARP requests into the network with ~1 seconds interval between them. Just before the first request arrives to one of network peer nodes, its neigh entry for the IP address transitions from STALE to DELAY. This transition, among other things, updates neigh->updated. Once the kernel receives the first gratuitous ARP, it ignores it because its arrival time is inside the locktime interval. The kernel still bumps neigh->updated. Then the second gratuitous ARP request arrives, and it's also ignored because it's still in the (new) locktime interval. Same happens for the third request. The node eventually heals itself (after delay_first_probe_time seconds since the initial transition to DELAY state), but it just wasted some time and require a new ARP request/reply round trip. This unfortunate behaviour both puts more load on the network, as well as reduces service availability. This patch changes neigh_update so that it bumps neigh->updated (as well as neigh->confirmed) only once we are sure that either lladdr or entry state will change). In the scenario described above, it means that the second gratuitous ARP request will actually update the entry lladdr. Ideally, we would update the neigh entry on the very first gratuitous ARP request. The locktime mechanism is designed to ignore ARP updates in a short timeframe after a previous ARP update was honoured by the kernel layer. This would require tracking timestamps for state transitions separately from timestamps when actual updates are received. This would probably involve changes in neighbour struct. Therefore, the patch doesn't tackle the issue of the first gratuitous APR ignored, leaving it for a follow-up. Signed-off-by:
-
Suman Anna authored
[ Upstream commit 0d835390 ] Commit 75f0aef6 ("uio: fix memory leak") has fixed up some memory leaks during the failure paths of the addition of uio attributes, but still is not correct entirely. A kobject_uevent() failure still needs a kobject_put() and the kobject container structure allocation failure before the kobject_init() doesn't need a kobject_put(). Fix this properly. Fixes: 75f0aef6 ("uio: fix memory leak") Signed-off-by:
Suman Anna <s-anna@ti.com> Signed-off-by:
-
Thomas Winter authored
[ Upstream commit bcfc7d33 ] The skb->dev that is passed into ip_mr_input is the loX device for VRFs. When we lookup a vif for this dev, none is found as we do not create vifs for loopbacks. Instead lookup a vif for the actual device that the packet was received on, eg the vlan. Signed-off-by:
Thomas Winter <Thomas.Winter@alliedtelesis.co.nz> cc: David Ahern <dsa@cumulusnetworks.com> cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> cc: roopa <roopa@cumulusnetworks.com> Acked-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Thomas Petazzoni authored
[ Upstream commit c034640a ] When platform_get_irq() fails, it returns an error code, which libahci_platform and replaces it by -EINVAL. This commit fixes that by propagating the error code. It fixes the situation where platform_get_irq() returns -EPROBE_DEFER because the interrupt controller is not available yet, and generally looks like the right thing to do. We pay attention to not show the "no irq" message when we are in an EPROBE_DEFER situation, because the driver probing will be retried later on, once the interrupt controller becomes available to provide the interrupt. Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Colin Ian King authored
[ Upstream commit bff5baf8 ] The setting of return code ret should be based on the error code passed into function end_extent_writepage and not on ret. Thanks to Liu Bo for spotting this mistake in the original fix I submitted. Detected by CoverityScan, CID#1414312 ("Logically dead code") Fixes: 5dca6eea ("Btrfs: mark mapping with error flag to report errors to userspace") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Reviewed-by:
Liu Bo <bo.li.liu@oracle.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Pan Bian authored
[ Upstream commit 018047a1 ] Function devm_clk_get() returns an ERR_PTR when it fails. However, in function kdwc3_probe(), its return value is not checked, which may result in a bad memory access bug. This patch fixes the bug. Signed-off-by:
Pan Bian <bianpan2016@163.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
James Morse authored
[ Upstream commit e8ec032b ] When KVM panics, it hurridly restores the host context and parachutes into the host's panic() code. At some point panic() touches the physical timer/counter. Unless we are an arm64 system with VHE, this traps back to EL2. If we're lucky, we panic again. Add a __timer_save_state() call to KVMs hyp_panic() path, this saves the guest registers and disables the traps for the host. Fixes: 53fd5b64 ("arm64: KVM: Add panic handling") Signed-off-by:
James Morse <james.morse@arm.com> Reviewed-by:
Marc Zyngier <marc.zyngier@arm.com> Reviewed-by:
Christoffer Dall <cdall@linaro.org> Signed-off-by:
-
James Morse authored
[ Upstream commit d2e19368 ] When KVM panics, it hurridly restores the host context and parachutes into the host's panic() code. This looks like it was copied from arm64, the 32bit KVM panic code needs to restore the host's banked registers too. At some point panic() touches the physical timer/counter, this will trap back to HYP. If we're lucky, we panic again. Add a __timer_save_state() call to KVMs hyp_panic() path, this saves the guest registers and disables the traps for the host. Fixes: c36b6db5 ("ARM: KVM: Add panic handling code") Signed-off-by:
-
Anup Patel authored
[ Upstream commit baae03a0 ] The DMA_PREP_FENCE is to be used when preparing Tx descriptor if output of Tx descriptor is to be used by next/dependent Tx descriptor. The DMA_PREP_FENSE will not be set correctly in do_async_gen_syndrome() when calling dma->device_prep_dma_pq() under following conditions: 1. ASYNC_TX_FENCE not set in submit->flags 2. DMA_PREP_FENCE not set in dma_flags 3. src_cnt (= (disks - 2)) is greater than dma_maxpq(dma, dma_flags) This patch fixes DMA_PREP_FENCE usage in do_async_gen_syndrome() taking inspiration from do_async_xor() implementation. Signed-off-by:
Anup Patel <anup.patel@broadcom.com> Reviewed-by:
Ray Jui <ray.jui@broadcom.com> Reviewed-by:
Scott Branden <scott.branden@broadcom.com> Acked-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
-
Mahesh Bandewar authored
[ Upstream commit 66eb9f86 ] Every address gets added with TENTATIVE flag even for the addresses with IFA_F_NODAD flag and dad-work is scheduled for them. During this DAD process we realize it's an address with NODAD and complete the process without sending any probe. However the TENTATIVE flags stays on the address for sometime enough to cause misinterpretation when we receive a NS. While processing NS, if the address has TENTATIVE flag, we mark it DADFAILED and endup with an address that was originally configured as NODAD with DADFAILED. We can't avoid scheduling dad_work for addresses with NODAD but we can avoid adding TENTATIVE flag to avoid this racy situation. Signed-off-by:
Mahesh Bandewar <maheshb@google.com> Acked-by:
-
Julia Lawall authored
[ Upstream commit 8c977f5a ] Device node iterators put the previous value of the index variable, so an explicit put causes a double put. In particular, of_mdiobus_register can fail before doing anything interesting, so one could view it as a no-op from the reference count point of view. Generated by: scripts/coccinelle/iterators/device_node_continue.cocci CC: Jon Mason <jon.mason@broadcom.com> Signed-off-by:
Julia Lawall <julia.lawall@lip6.fr> Signed-off-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
-
Ganapatrao Kulkarni authored
[ Upstream commit 78a19cfd ] commit d98ecdac ("arm64: perf: Count EL2 events if the kernel is running in HYP") returns -EINVAL when perf system call perf_event_open is called with exclude_hv != exclude_kernel. This change breaks applications on VHE enabled ARMv8.1 platforms. The issue was observed with HHVM application, which calls perf_event_open with exclude_hv = 1 and exclude_kernel = 0. There is no separate hypervisor privilege level when VHE is enabled, the host kernel runs at EL2. So when VHE is enabled, we should ignore exclude_hv from the application. This behaviour is consistent with PowerPC where the exclude_hv is ignored when the hypervisor is not present and with x86 where this flag is ignored. Signed-off-by:
Ganapatrao Kulkarni <ganapatrao.kulkarni@cavium.com> [will: added comment to justify the behaviour of exclude_hv] Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Peter Rosin authored
[ Upstream commit 68118e0e ] It is only prudent to let go of resources that are not used. Fixes: b3fdd327 ("i2c: mux: Add register-based mux i2c-mux-reg") Signed-off-by:
Peter Rosin <peda@axentia.se> Signed-off-by:
-
Fabio Estevam authored
[ Upstream commit 79935915 ] When running a stress playback/stop loop test on a mx6wandboard channel swaps can be noticed randomly. Increasing the SGTL5000 LRCLK pad strength to its maximum value fixes the issue, so add the 'lrclk-strength' property to avoid the audio channel swaps. Signed-off-by:
Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
-
Michael Ellerman authored
[ Upstream commit 43e24e82 ] On powerpc we can build the kernel with two different ABIs for mcount(), which is used by ftrace. Kernels built with one ABI do not know how to load modules built with the other ABI. The new style ABI is called "mprofile-kernel", for want of a better name. Currently if we build a module using the old style ABI, and the kernel with mprofile-kernel, when we load the module we'll oops something like: # insmod autofs4-no-mprofile-kernel.ko ftrace-powerpc: Unexpected instruction f8810028 around bl _mcount ------------[ cut here ]------------ WARNING: CPU: 6 PID: 3759 at ../kernel/trace/ftrace.c:2024 ftrace_bug+0x2b8/0x3c0 CPU: 6 PID: 3759 Comm: insmod Not tainted 4.11.0-rc3-gcc-5.4.1-00017-g5a61ef74 #11 ... NIP [c0000000001eaa48] ftrace_bug+0x2b8/0x3c0 LR [c0000000001eaff8] ftrace_process_locs+0x4a8/0x590 Call Trace: alloc_pages_current+0xc4/0x1d0 (unreliable) ftrace_process_locs+0x4a8/0x590 load_module+0x1c8c/0x28f0 SyS_finit_module+0x110/0x140 system_call+0x38/0xfc ... ftrace failed to modify [<d000000002a31024>] 0xd000000002a31024 actual: 35:65:00:48 We can avoid this by including in the vermagic whether the kernel/module was built with mprofile-kernel. Which results in: # insmod autofs4-pg.ko autofs4: version magic '4.11.0-rc3-gcc-5.4.1-00017-g5a61ef74 SMP mod_unload modversions ' should be '4.11.0-rc3-gcc-5.4.1-00017-g5a61ef74-dirty SMP mod_unload modversions mprofile-kernel' insmod: ERROR: could not insert module autofs4-pg.ko: Invalid module format Fixes: 8c50b72a ("powerpc/ftrace: Add Kconfig & Make glue for mprofile-kernel") Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Acked-by:
Balbir Singh <bsingharora@gmail.com> Acked-by:
Jessica Yu <jeyu@redhat.com> Signed-off-by:
-
Peter Zijlstra authored
[ Upstream commit 8309f86c ] Since the clocksource watchdog will only detect broken TSC after the fact, all TSC based clocks will likely have observed non-continuous values before/when switching away from TSC. Therefore only thing to fully avoid random clock movement when your BIOS randomly mucks with TSC values from SMI handlers is reporting the TSC as unstable at boot. Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Geert Uytterhoeven authored
[ Upstream commit b7c563c4 ] R-Car V2H and E2 do not have the PLL0CR register, but use a fixed multiplier (depending on mode pins) and divider. This corrects the clock rate of "pll0" (PLL0 VCO after post divider) on R-Car V2H and E2 from 1.5 GHz to 1 GHz. Inspired by Sergei Shtylyov's work for the common R-Car Gen2 and RZ/G Clock Pulse Generator support core. Fixes: 7c4163aa ("ARM: dts: r8a7792: initial SoC device tree") Fixes: 0dce5454 ("ARM: shmobile: Initial r8a7794 SoC device tree") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
Andrea della Porta authored
staging: wlan-ng: prism2mgmt.c: fixed a double endian conversion before calling hfa384x_drvr_setconfig16, also fixes relative sparse warning [ Upstream commit dea20579 ] staging: wlan-ng: prism2mgmt.c: This patches fixes a double endian conversion. cpu_to_le16() was called twice first in prism2mgmt_scan and again inside hfa384x_drvr_setconfig16() for the same variable, hence it was swapped twice. Incidentally, it also fixed the following sparse warning: drivers/staging/wlan-ng/prism2mgmt.c:173:30: warning: incorrect type in assignment (different base types) drivers/staging/wlan-ng/prism2mgmt.c:173:30: expected unsigned short [unsigned] [usertype] word drivers/staging/wlan-ng/prism2mgmt.c:173:30: got restricted __le16 [usertype] <noident> Unfortunately, only compile tested. Signed-off-by:
Andrea della Porta <sfaragnaus@gmail.com> Signed-off-by:
-
Fabio Estevam authored
[ Upstream commit 2fe4bff3 ] Currently the following errors are seen: [ 14.015056] mc13xxx 0-0008: Failed to read IRQ status: -6 [ 27.321093] mc13xxx 0-0008: Failed to read IRQ status: -6 [ 27.411681] mc13xxx 0-0008: Failed to read IRQ status: -6 [ 27.456281] mc13xxx 0-0008: Failed to read IRQ status: -6 [ 30.527106] mc13xxx 0-0008: Failed to read IRQ status: -6 [ 36.596900] mc13xxx 0-0008: Failed to read IRQ status: -6 Also when reading the interrupts via 'cat /proc/interrupts' the PMIC GPIO interrupt counter does not stop increasing. The reason for the storm of interrupts is that the PUS field of register IOMUXC_SW_PAD_CTL_PAD_CSI0_DAT5 is currently configured as: 10 : 100k pullup and the PMIC interrupt is being registered as IRQ_TYPE_LEVEL_HIGH type, which is the correct type as per the MC34708 datasheet. Use the default power on value for the IOMUX, which sets PUS field as: 00: 360k pull down This prevents the spurious PMIC interrupts from happening. Commit e1ffceb0 ("ARM: imx53: qsrb: fix PMIC interrupt level") correctly described the irq type as IRQ_TYPE_LEVEL_HIGH, but missed to update the IOMUX of the PMIC GPIO as pull down. Fixes: e1ffceb0 ("ARM: imx53: qsrb: fix PMIC interrupt level") Signed-off-by:
-
Nicholas Mc Guire authored
[ Upstream commit e7215fe4 ] If the timeout-case prints a warning message then probably the interrupted case should also. Further, wait_for_completion_interruptible_timeout() returns long not int. Fixes: commit 03b262f2 ("iio:pressure: initial zpa2326 barometer support") Signed-off-by:
Nicholas Mc Guire <der.herr@hofr.at> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 216c4e9d ] In the current code we accidentally return the successful result from idr_alloc() instead of a negative error pointer. The caller is looking for an error pointer and so it treats the returned value as a valid pointer. This one might be a bit serious because if it lets people get around the kernel's protection for remapping NULL. I'm not sure. Fixes: 75d2364e (PowerCap: Add class driver) Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Doug Berger authored
[ Upstream commit 0c2aa0e4 ] The GISB bus can support addresses beyond 32-bits. So this commit corrects support for reading a captured 64-bit address into a 64-bit variable by obtaining the high bits from the ARB_ERR_CAP_HI_ADDR register (when present) and then outputting the full 64-bit value. It also removes unused definitions. Fixes: 44127b77 ("bus: add Broadcom GISB bus arbiter timeout/error handler") Signed-off-by:
Doug Berger <opendmb@gmail.com> Acked-by:
Gregory Fong <gregory.0xf0@gmail.com> Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Doug Berger authored
[ Upstream commit 856c7ccb ] This commit corrects the bug introduced in commit f8083587 ("bus: brcmstb_gisb: Look up register offsets in a table") such that gisb_write() translates the register enumeration into an offset from the base address for writes as well as reads. Fixes: f8083587 ("bus: brcmstb_gisb: Look up register offsets in a table") Signed-off-by:
-
Christophe JAILLET authored
[ Upstream commit cd123007 ] In fs/cifs/smb2pdu.h, we have: #define SMB2_SHARE_TYPE_DISK 0x01 #define SMB2_SHARE_TYPE_PIPE 0x02 #define SMB2_SHARE_TYPE_PRINT 0x03 Knowing that, with the current code, the SMB2_SHARE_TYPE_PRINT case can never trigger and printer share would be interpreted as disk share. So, test the ShareType value for equality instead. Fixes: faaf946a ("CIFS: Add tree connect/disconnect capability for SMB2") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by:
Aurelien Aptel <aaptel@suse.com> Signed-off-by:
Steve French <smfrench@gmail.com> Signed-off-by:
-
Reza Arbab authored
[ Upstream commit 8d35bb31 ] After commit e2ecc8a7 ("mm, vmstat: print non-populated zones in zoneinfo"), /proc/zoneinfo will show unpopulated zones. A memoryless node, having no populated zones at all, was previously ignored, but will now trigger the WARN() in is_zone_first_populated(). Remove this warning, as its only purpose was to warn of a situation that has since been enabled. Aside: The "per-node stats" are still printed under the first populated zone, but that's not necessarily the first stanza any more. I'm not sure which criteria is more important with regard to not breaking parsers, but it looks a little weird to the eye. Fixes: e2ecc8a7 ("mm, vmstat: print node-based stats in zoneinfo file") Link: http://lkml.kernel.org/r/1493854905-10918-1-git-send-email-arbab@linux.vnet.ibm.comSigned-off-by:
Reza Arbab <arbab@linux.vnet.ibm.com> Cc: David Rientjes <rientjes@google.com> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Neil Horman authored
[ Upstream commit 1c4d5f51 ] There are several paths in vmxnet3, where settings changes cause the adapter to be brought down and back up (vmxnet3_set_ringparam among them). Should part of the reset operation fail, these paths call vmxnet3_force_close, which enables all napi instances prior to calling dev_close (with the expectation that vmxnet3_close will then properly disable them again). However, vmxnet3_force_close neglects to clear VMXNET3_STATE_BIT_QUIESCED prior to calling dev_close. As a result vmxnet3_quiesce_dev (called from vmxnet3_close), returns early, and leaves all the napi instances in a enabled state while the device itself is closed. If a device in this state is activated again, napi_enable will be called on already enabled napi_instances, leading to a BUG halt. The fix is to simply enausre that the QUIESCED bit is cleared in vmxnet3_force_close to allow quesence to be completed properly on close. Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> CC: Shrikrishna Khare <skhare@vmware.com> CC: "VMware, Inc." <pv-drivers@vmware.com> CC: "David S. Miller" <davem@davemloft.net> Signed-off-by:
-
MaJun authored
[ Upstream commit 9459a04b ] The register array offset for clearing an interrupt is calculated by: offset = (hwirq - RESERVED_IRQ_PER_MBIGEN_CHIP) / 32; This is wrong because the clear register array includes the reserved interrupts. So the clear operation ends up in the wrong register. This went unnoticed so far, because the hardware clears the real bit through a timeout mechanism when the hardware is configured in debug mode. That debug mode was enabled on early generations of the hardware, so the problem was papered over. On newer hardware with updated firmware the debug mode was disabled, so the bits did not get cleared which causes the system to malfunction. Remove the subtraction of RESERVED_IRQ_PER_MBIGEN_CHIP, so the correct register is accessed. [ tglx: Rewrote changelog ] Fixes: a6c2f87b ("irqchip/mbigen: Implement the mbigen irq chip operation functions") Signed-off-by:
MaJun <majun258@huawei.com> Signed-off-by:
Hanjun Guo <hanjun.guo@linaro.org> Acked-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Paul Mackerras authored
[ Upstream commit 67325e98 ] The PR KVM implementation of the PAPR HPT hypercalls (H_ENTER etc.) access an image of the HPT in userspace memory using copy_from_user and copy_to_user. Recently, the declarations of those functions were annotated to indicate that the return value must be checked. Since this code doesn't currently check the return value, this causes compile warnings like the ones shown below, and since on PPC the default is to compile arch/powerpc with -Werror, this causes the build to fail. To fix this, we check the return values, and if non-zero, fail the hypercall being processed with a H_FUNCTION error return value. There is really no good error return value to use since PAPR didn't envisage the possibility that the hypervisor may not be able to access the guest's HPT, and H_FUNCTION (function not supported) seems as good as any. The typical compile warnings look like this: CC arch/powerpc/kvm/book3s_pr_papr.o /home/paulus/kernel/kvm/arch/powerpc/kvm/book3s_pr_papr.c: In function ‘kvmppc_h_pr_enter’: /home/paulus/kernel/kvm/arch/powerpc/kvm/book3s_pr_papr.c:53:2: error: ignoring return value of ‘copy_from_user’, declared with attribute warn_unused_result [-Werror=unused-result] copy_from_user(pteg, (void __user *)pteg_addr, sizeof(pteg)); ^ /home/paulus/kernel/kvm/arch/powerpc/kvm/book3s_pr_papr.c:74:2: error: ignoring return value of ‘copy_to_user’, declared with attribute warn_unused_result [-Werror=unused-result] copy_to_user((void __user *)pteg_addr, hpte, HPTE_SIZE); ^ ... etc. Signed-off-by:
Paul Mackerras <paulus@ozlabs.org> Signed-off-by:
-
KT Liao authored
[ Upstream commit d899520b ] One of Elan modules with sample version is 0x74 and hw_version is 0x03 has a bug in absolute mode implementation, so let it run in default PS/2 relative mode. Signed-off-by:
KT Liao <kt.liao@emc.com.tw> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Dmitry Torokhov authored
[ Upstream commit c5928551 ] Before trying to properly initialize the touchpad and generate bunch of errors, let's first see it there is anything at the given address. If we get error, fail silently with -ENXIO. Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Jon Mason authored
[ Upstream commit b6016166 ] There is a potential unnecessary refcount decrement on error path of put_device(&pb->mii_bus->dev), as it is possible to avoid the of_mdio_find_bus() call if mux_bus is specified by the calling function. The same put_device() is not called in the error path if the devm_kzalloc of pb fails. This caused the variable used in the put_device() to be changed, as the pb pointer was obviously not set up. There is an unnecessary of_node_get() on child_bus_node if the of_mdiobus_register() is successful, as the for_each_available_child_of_node() automatically increments this. Thus the refcount on this node will always be +1 more than it should be. There is no of_node_put() on child_bus_node if the of_mdiobus_register() call fails. Finally, it is lacking devm_kfree() of pb in the error path. While this might not be technically necessary, it was present in other parts of the function. So, I am adding it where necessary to make it uniform. Signed-off-by:
Jon Mason <jon.mason@broadcom.com> Fixes: f20e6657 ("mdio: mux: Enhanced MDIO mux framework for integrated multiplexers") Fixes: 0ca2997d ("netdev/of/phy: Add MDIO bus multiplexer support.") Signed-off-by:
-
Colin Ian King authored
[ Upstream commit 0fe20faf ] Currently rcode is being initialized to NX_RCODE_SUCCESS and later it is checked to see if it is not NX_RCODE_SUCCESS which is never true. It appears that there is an unintentional missing assignment of rcode from the return of the call to netxen_issue_cmd() that was dropped in an earlier fix, so add it in. Detected by CoverityScan, CID#401900 ("Logically dead code") Fixes: 2dcd5d95 ("netxen_nic: fix cdrp race condition") Signed-off-by:
-
Stefan Wahren authored
[ Upstream commit 8d66c30b ] The qca_spi driver causes alignment issues on ARM devices. So fix this by using netdev_alloc_skb_ip_align(). Signed-off-by:
Stefan Wahren <stefan.wahren@i2se.com> Fixes: 291ab06e ("net: qualcomm: new Ethernet over SPI driver for QCA7000") Signed-off-by:
-
Wen Xiong authored
[ Upstream commit f36ea50c ] When formatting NVMe to 512B/4K + T10 DIf/DIX, dd with split op returns "Input/output error". Looks block layer split the bio after calling bio_integrity_prep(bio). This patch fixes the issue. Below is how we debug this issue: (1)format nvme to 4K block # size with type 2 DIF (2)dd with block size bigger than 1024k. oflag=direct dd: error writing '/dev/nvme0n1': Input/output error We added some debug code in nvme device driver. It showed us the first op and the second op have the same bi and pi address. This is not correct. 1st op: nvme0n1 Op:Wr slba 0x505 length 0x100, PI ctrl=0x1400, dsmgmt=0x0, AT=0x0 & RT=0x505 Guard 0x00b1, AT 0x0000, RT physical 0x00000505 RT virtual 0x00002828 2nd op: nvme0n1 Op:Wr slba 0x605 length 0x1, PI ctrl=0x1400, dsmgmt=0x0, AT=0x0 & RT=0x605 ==> This op fails and subsequent 5 retires.. Guard 0x00b1, AT 0x0000, RT physical 0x00000605 RT virtual 0x00002828 With the fix, It showed us both of the first op and the second op have correct bi and pi address. 1st op: nvme2n1 Op:Wr slba 0x505 length 0x100, PI ctrl=0x1400, dsmgmt=0x0, AT=0x0 & RT=0x505 Guard 0x5ccb, AT 0x0000, RT physical 0x00000505 RT virtual 0x00002828 2nd op: nvme2n1 Op:Wr slba 0x605 length 0x1, PI ctrl=0x1400, dsmgmt=0x0, AT=0x0 & RT=0x605 Guard 0xab4c, AT 0x0000, RT physical 0x00000605 RT virtual 0x00003028 Signed-off-by:
Wen Xiong <wenxiong@linux.vnet.ibm.com> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
