There are a couple of spelling mistakes of signame names. Fix them.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20220907170902.687340-1-colin.i.king@gmail.comSigned-off-by: Catalin Marinas <catalin.marinas@arm.com>

Currently syscall-abi permits the bits in Z registers not shared with the
V registers as well as all of the predicate registers to be preserved on
syscall but the actual implementation has always cleared them and our
documentation has now been updated to make that the documented ABI so
update the syscall-abi test to match.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220829162502.886816-4-broonie@kernel.orgSigned-off-by: Catalin Marinas <catalin.marinas@arm.com>

The buffer used for verifying SVE Z registers allocated enough space for
16 maximally sized registers rather than 32 due to using the macro for the
number of P registers. In practice this didn't matter since for historical
reasons the maximum VQ defined in the ABI is greater the architectural
maximum so we will always allocate more space than is needed even with
emulated platforms implementing the architectural maximum. Still, we should
use the right define.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220829162502.886816-2-broonie@kernel.orgSigned-off-by: Catalin Marinas <catalin.marinas@arm.com>

Now that the core utilities for signal testing support handling data in
EXTRA_CONTEXT blocks we can test larger SVE and SME VLs which spill over
the limits in the base signal context. This is done by defining storage
for the context as a union with a ucontext_t and a buffer together with
some helpers for getting relevant sizes and offsets like we do for
fake_sigframe, this isn't the most lovely code ever but is fairly
straightforward to implement and much less invasive to the somewhat
unclear and indistinct layers of abstraction in the signal handling test
code.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220829160703.874492-11-broonie@kernel.orgSigned-off-by: Catalin Marinas <catalin.marinas@arm.com>

In order to allow testing of signal contexts that overflow the base signal
frame allow callers to pass the buffer size for the user context into
get_signal_context(). No functional change.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220829160703.874492-10-broonie@kernel.orgSigned-off-by: Catalin Marinas <catalin.marinas@arm.com>

When preserving the signal context for later verification by testcases
check for and include any EXTRA_CONTEXT block if enough space has been
provided.

Since the EXTRA_CONTEXT block includes a pointer to the start of the
additional data block we need to do at least some fixup on the copied
data. For simplicity in users we do this by extending the length of
the EXTRA_CONTEXT to include the following termination record, this
will cause users to see the extra data as part of the linked list of
contexts without needing any special handling. Care will be needed if
any specific tests for EXTRA_CONTEXT are added beyond the validation
done in ASSERT_GOOD_CONTEXT.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220829160703.874492-9-broonie@kernel.orgSigned-off-by: Catalin Marinas <catalin.marinas@arm.com>

Currently in validate_reserved() we check the basic form and contents of
an EXTRA_CONTEXT block but do not actually validate anything inside the
data block it provides. Extend the validation to do so, when we get to the
terminator for the main data block reset and start walking the extra data
block instead.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220829160703.874492-8-broonie@kernel.orgSigned-off-by: Catalin Marinas <catalin.marinas@arm.com>

Currently for the more complex signal context types we validate the context
specific details the end of the parsing loop validate_reserved() if we've
ever seen a context of that type. This is currently merely a bit inefficient
but will get a bit awkward when we start parsing extra_context, at which
point we will need to reset the head to advance into the extra space that
extra_context provides. Instead only do the more detailed checks on each
context type the first time we see that context type.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220829160703.874492-7-broonie@kernel.orgSigned-off-by: Catalin Marinas <catalin.marinas@arm.com>

Nothing outside testcases.c should need to use validate_extra_context(),
remove the prototype to ensure nothing does.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220829160703.874492-6-broonie@kernel.orgSigned-off-by: Catalin Marinas <catalin.marinas@arm.com>

Currently in validate_extra_context() we assert both that the extra data
pointed to by the EXTRA_CONTEXT is 16 byte aligned and that it immediately
follows the struct _aarch64_ctx providing the terminator for the linked
list of contexts in the signal frame. Since struct _aarch64_ctx is an 8
byte structure which must be 16 byte aligned these cannot both be true. As
documented in sigcontext.h and implemented by the kernel the extra data
should be at the next 16 byte aligned address after the terminator so fix
the validation to match.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220829160703.874492-5-broonie@kernel.orgSigned-off-by: Catalin Marinas <catalin.marinas@arm.com>

When arm64 signal context data overflows the base struct sigcontext it gets
placed in an extra buffer pointed to by a record of type EXTRA_CONTEXT in
the base struct sigcontext which is required to be the last record in the
base struct sigframe. The current validation code attempts to check this
by using GET_RESV_NEXT_HEAD() to step forward from the current record to
the next but that is a macro which assumes it is being provided with a
struct _aarch64_ctx and uses the size there to skip forward to the next
record. Instead validate_extra_context() passes it a struct extra_context
which has a separate size field. This compiles but results in us trying
to validate a termination record in completely the wrong place, at best
failing validation and at worst just segfaulting. Fix this by passing
the struct _aarch64_ctx we meant to into the macro.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220829160703.874492-4-broonie@kernel.orgSigned-off-by: Catalin Marinas <catalin.marinas@arm.com>

In handle_input_signal_copyctx() we use ASSERT_GOOD_CONTEXT() to validate
that the context we are saving meets expectations however we do this on
the saved copy rather than on the actual signal context passed in. This
breaks validation of EXTRA_CONTEXT since we attempt to validate the ABI
requirement that the additional space supplied is immediately after the
termination record in the standard context which will not be the case
after it has been copied to another location.

Fix this by doing the validation before we copy. Note that nothing actually
looks inside the EXTRA_CONTEXT at present.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220829160703.874492-3-broonie@kernel.orgSigned-off-by: Catalin Marinas <catalin.marinas@arm.com>

The za_regs signal test was enumerating the SVE vector lengths rather than
the SME vector lengths through cut'n'paste error when determining what to
test. Enumerate the SME vector lengths instead.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220829160703.874492-2-broonie@kernel.orgSigned-off-by: Catalin Marinas <catalin.marinas@arm.com>

When ZA is disabled there should be no register data in the ZA signal
frame, add a test case which confirms that this is the case.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220829155728.854947-3-broonie@kernel.orgSigned-off-by: Catalin Marinas <catalin.marinas@arm.com>

Currently we accept any size for the ZA signal context that the shared
code will accept which means we don't verify that any data is present.
Since we have enabled ZA we know that there must be data so strengthen
the check to only accept a signal frame with data, and while we're at it
since we enabled ZA but did not set any data we know that ZA must contain
zeros, confirm that.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220829155728.854947-2-broonie@kernel.orgSigned-off-by: Catalin Marinas <catalin.marinas@arm.com>

Currently the stress test programs for floating point context switching are
run by hand, there are extremely simplistic harnesses which run some copies
of each test individually but they are not integrated into kselftest and
with SVE and SME they only run with whatever vector length the process has
by default. This is hassle when running the tests and means that they're
not being run at all by CI systems picking up kselftest.

In order to improve our coverage and provide a more convenient interface
provide a harness program which starts enough stress test programs up to
cause context switching and runs them for a set period. If only FPSIMD is
available in the system we start two copies of the FPSIMD stress test per
CPU, otherwise we start one copy of the FPSIMD and then start the SVE,
streaming SVE and ZA tests once per CPU for each available VL they have
to run on.  We then run for a set period monitoring for any errors
reported by the test programs before cleanly terminating them.

In order to provide additional coverage of signal handling and some extra
noise in the scheduling we send a SIGUSR2 to the stress tests once a
second, the tests will count the number of signals they get.

Since kselftest is generally expected to run quickly we by default only run
for ten seconds. This is enough to show if there is anything cripplingly
wrong but not exactly a thorough soak test, for interactive and more
focused use a command line option -t N is provided which overrides the
length of time to run for (specified in seconds) and if 0 is specified then
there is no timeout and the test must be manually terminated. The timeout
is counted in seconds with no output, this is done to account for the
potentially slow startup time for the test programs on virtual platforms
which tend to struggle during startup as they are both slow and tend to
support a wide range of vector lengths.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220829154452.824870-5-broonie@kernel.orgSigned-off-by: Catalin Marinas <catalin.marinas@arm.com>

To interface more robustly with other processes install the signal handers
in the floating point stress tests before we produce any output, this
means that a parent process can know that if it has seen any output from
the test then the test is ready to handle incoming signals.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220906220056.820295-1-broonie@kernel.orgSigned-off-by: Catalin Marinas <catalin.marinas@arm.com>

Currently the floating point stress tests mostly support testing that the
data they are checking can be disrupted from a signal handler triggered by
SIGUSR1. This is not properly implemented for all the tests and in testing
is frequently modified to just handle the signal without corrupting data in
order to ensure that signal handling does not corrupt data. Directly support
this usage by installing a SIGUSR2 handler which simply counts the signal
delivery.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220829154452.824870-3-broonie@kernel.orgSigned-off-by: Catalin Marinas <catalin.marinas@arm.com>

Since we now have an explicit test for the syscall ABI there is no need for
za-test to cover getpid() so just unconditionally do sched_yield() like we
do in fpsimd-test.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220829154452.824870-2-broonie@kernel.orgSigned-off-by: Catalin Marinas <catalin.marinas@arm.com>

Add some trivial hwcap validation which checks that /proc/cpuinfo and
AT_HWCAP agree with each other and can verify that for extensions that can
generate a SIGILL due to adding new instructions one appears or doesn't
appear as expected. I've added SVE and SME, other capabilities can be
added later if this gets merged.

This isn't super exciting but on the other hand took very little time to
write and should be handy when verifying that you wired up AT_HWCAP
properly.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220829154602.827275-1-broonie@kernel.orgSigned-off-by: Catalin Marinas <catalin.marinas@arm.com>

Pull more hotfixes from Andrew Morton:
 "Seventeen hotfixes.  Mostly memory management things.

  Ten patches are cc:stable, addressing pre-6.0 issues"

* tag 'mm-hotfixes-stable-2022-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  .mailmap: update Luca Ceresoli's e-mail address
  mm/mprotect: only reference swap pfn page if type match
  squashfs: don't call kmalloc in decompressors
  mm/damon/dbgfs: avoid duplicate context directory creation
  mailmap: update email address for Colin King
  asm-generic: sections: refactor memory_intersects
  bootmem: remove the vmemmap pages from kmemleak in put_page_bootmem
  ocfs2: fix freeing uninitialized resource on ocfs2_dlm_shutdown
  Revert "memcg: cleanup racy sum avoidance code"
  mm/zsmalloc: do not attempt to free IS_ERR handle
  binder_alloc: add missing mmap_lock calls when using the VMA
  mm: re-allow pinning of zero pfns (again)
  vmcoreinfo: add kallsyms_num_syms symbol
  mailmap: update Guilherme G. Piccoli's email addresses
  writeback: avoid use-after-free after removing device
  shmem: update folio if shmem_replace_page() updates the page
  mm/hugetlb: avoid corrupting page->mapping in hugetlb_mcopy_atomic_pte

Pull bitmap fixes from Yury Norov:
 "Fix the reported issues, and implements the suggested improvements,
  for the version of the cpumask tests [1] that was merged with commit
  c41e8866 ("lib/test: introduce cpumask KUnit test suite").

  These changes include fixes for the tests, and better alignment with
  the KUnit style guidelines"

* tag 'bitmap-6.0-rc3' of github.com:/norov/linux:
  lib/cpumask_kunit: add tests file to MAINTAINERS
  lib/cpumask_kunit: log mask contents
  lib/test_cpumask: follow KUnit style guidelines
  lib/test_cpumask: fix cpu_possible_mask last test
  lib/test_cpumask: drop cpu_possible_mask full test

My Bootlin address is preferred from now on.

Link: https://lkml.kernel.org/r/20220826130515.3011951-1-luca.ceresoli@bootlin.comSigned-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Atish Patra <atishp@atishpatra.org>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Yu Zhao reported a bug after the commit "mm/swap: Add swp_offset_pfn() to
fetch PFN from swap entry" added a check in swp_offset_pfn() for swap type [1]:

  kernel BUG at include/linux/swapops.h:117!
  CPU: 46 PID: 5245 Comm: EventManager_De Tainted: G S         O L 6.0.0-dbg-DEV #2
  RIP: 0010:pfn_swap_entry_to_page+0x72/0xf0
  Code: c6 48 8b 36 48 83 fe ff 74 53 48 01 d1 48 83 c1 08 48 8b 09 f6
  c1 01 75 7b 66 90 48 89 c1 48 8b 09 f6 c1 01 74 74 5d c3 eb 9e <0f> 0b
  48 ba ff ff ff ff 03 00 00 00 eb ae a9 ff 0f 00 00 75 13 48
  RSP: 0018:ffffa59e73fabb80 EFLAGS: 00010282
  RAX: 00000000ffffffe8 RBX: 0c00000000000000 RCX: ffffcd5440000000
  RDX: 1ffffffffff7a80a RSI: 0000000000000000 RDI: 0c0000000000042b
  RBP: ffffa59e73fabb80 R08: ffff9965ca6e8bb8 R09: 0000000000000000
  R10: ffffffffa5a2f62d R11: 0000030b372e9fff R12: ffff997b79db5738
  R13: 000000000000042b R14: 0c0000000000042b R15: 1ffffffffff7a80a
  FS:  00007f549d1bb700(0000) GS:ffff99d3cf680000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000440d035b3180 CR3: 0000002243176004 CR4: 00000000003706e0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
   <TASK>
   change_pte_range+0x36e/0x880
   change_p4d_range+0x2e8/0x670
   change_protection_range+0x14e/0x2c0
   mprotect_fixup+0x1ee/0x330
   do_mprotect_pkey+0x34c/0x440
   __x64_sys_mprotect+0x1d/0x30

It triggers because pfn_swap_entry_to_page() could be called upon e.g. a
genuine swap entry.

Fix it by only calling it when it's a write migration entry where the page*
is used.

[1] https://lore.kernel.org/lkml/CAOUHufaVC2Za-p8m0aiHw6YkheDcrO-C3wRGixwDS32VTS+k1w@mail.gmail.com/

Link: https://lkml.kernel.org/r/20220823221138.45602-1-peterx@redhat.com
Fixes: 6c287605 ("mm: remember exclusively mapped anonymous pages with PG_anon_exclusive")
Signed-off-by: Peter Xu <peterx@redhat.com>
Reported-by: Yu Zhao <yuzhao@google.com>
Tested-by: Yu Zhao <yuzhao@google.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

The decompressors may be called while in an atomic section.  So move the
kmalloc() out of this path, and into the "page actor" init function.

This fixes a regression introduced by commit
f268eedd ("squashfs: extend "page actor" to handle missing pages")

Link: https://lkml.kernel.org/r/20220822215430.15933-1-phillip@squashfs.org.uk
Fixes: f268eedd ("squashfs: extend "page actor" to handle missing pages")
Reported-by: Chris Murphy <lists@colorremedies.com>
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

When user tries to create a DAMON context via the DAMON debugfs interface
with a name of an already existing context, the context directory creation
fails but a new context is created and added in the internal data
structure, due to absence of the directory creation success check.  As a
result, memory could leak and DAMON cannot be turned on.  An example test
case is as below:

    # cd /sys/kernel/debug/damon/
    # echo "off" >  monitor_on
    # echo paddr > target_ids
    # echo "abc" > mk_context
    # echo "abc" > mk_context
    # echo $$ > abc/target_ids
    # echo "on" > monitor_on  <<< fails

Return value of 'debugfs_create_dir()' is expected to be ignored in
general, but this is an exceptional case as DAMON feature is depending
on the debugfs functionality and it has the potential duplicate name
issue.  This commit therefore fixes the issue by checking the directory
creation failure and immediately return the error in the case.

Link: https://lkml.kernel.org/r/20220821180853.2400-1-sj@kernel.org
Fixes: 75c1c2b5 ("mm/damon/dbgfs: support multiple contexts")
Signed-off-by: Badari Pulavarty <badari.pulavarty@intel.com>
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org>	[ 5.15.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Colin King is working on kernel janitorial fixes in his spare time and
using his Intel email is confusing.  Use his gmail account as the default
email address.

Link: https://lkml.kernel.org/r/20220817212753.101109-1-colin.i.king@gmail.comSigned-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

There are two problems with the current code of memory_intersects:

First, it doesn't check whether the region (begin, end) falls inside the
region (virt, vend), that is (virt < begin && vend > end).

The second problem is if vend is equal to begin, it will return true but
this is wrong since vend (virt + size) is not the last address of the
memory region but (virt + size -1) is.  The wrong determination will
trigger the misreporting when the function check_for_illegal_area calls
memory_intersects to check if the dma region intersects with stext region.

The misreporting is as below (stext is at 0x80100000):
 WARNING: CPU: 0 PID: 77 at kernel/dma/debug.c:1073 check_for_illegal_area+0x130/0x168
 DMA-API: chipidea-usb2 e0002000.usb: device driver maps memory from kernel text or rodata [addr=800f0000] [len=65536]
 Modules linked in:
 CPU: 1 PID: 77 Comm: usb-storage Not tainted 5.19.0-yocto-standard #5
 Hardware name: Xilinx Zynq Platform
  unwind_backtrace from show_stack+0x18/0x1c
  show_stack from dump_stack_lvl+0x58/0x70
  dump_stack_lvl from __warn+0xb0/0x198
  __warn from warn_slowpath_fmt+0x80/0xb4
  warn_slowpath_fmt from check_for_illegal_area+0x130/0x168
  check_for_illegal_area from debug_dma_map_sg+0x94/0x368
  debug_dma_map_sg from __dma_map_sg_attrs+0x114/0x128
  __dma_map_sg_attrs from dma_map_sg_attrs+0x18/0x24
  dma_map_sg_attrs from usb_hcd_map_urb_for_dma+0x250/0x3b4
  usb_hcd_map_urb_for_dma from usb_hcd_submit_urb+0x194/0x214
  usb_hcd_submit_urb from usb_sg_wait+0xa4/0x118
  usb_sg_wait from usb_stor_bulk_transfer_sglist+0xa0/0xec
  usb_stor_bulk_transfer_sglist from usb_stor_bulk_srb+0x38/0x70
  usb_stor_bulk_srb from usb_stor_Bulk_transport+0x150/0x360
  usb_stor_Bulk_transport from usb_stor_invoke_transport+0x38/0x440
  usb_stor_invoke_transport from usb_stor_control_thread+0x1e0/0x238
  usb_stor_control_thread from kthread+0xf8/0x104
  kthread from ret_from_fork+0x14/0x2c

Refactor memory_intersects to fix the two problems above.

Before the 1d7db834 ("dma-debug: use memory_intersects()
directly"), memory_intersects is called only by printk_late_init:

printk_late_init -> init_section_intersects ->memory_intersects.

There were few places where memory_intersects was called.

When commit 1d7db834 ("dma-debug: use memory_intersects()
directly") was merged and CONFIG_DMA_API_DEBUG is enabled, the DMA
subsystem uses it to check for an illegal area and the calltrace above
is triggered.

[akpm@linux-foundation.org: fix nearby comment typo]
Link: https://lkml.kernel.org/r/20220819081145.948016-1-quanyang.wang@windriver.com
Fixes: 97955936 ("asm/sections: add helpers to check for section data")
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Thierry Reding <treding@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

The vmemmap pages is marked by kmemleak when allocated from memblock. 
Remove it from kmemleak when freeing the page.  Otherwise, when we reuse
the page, kmemleak may report such an error and then stop working.

 kmemleak: Cannot insert 0xffff98fb6eab3d40 into the object search tree (overlaps existing)
 kmemleak: Kernel memory leak detector disabled
 kmemleak: Object 0xffff98fb6be00000 (size 335544320):
 kmemleak:   comm "swapper", pid 0, jiffies 4294892296
 kmemleak:   min_count = 0
 kmemleak:   count = 0
 kmemleak:   flags = 0x1
 kmemleak:   checksum = 0
 kmemleak:   backtrace:

Link: https://lkml.kernel.org/r/20220819094005.2928241-1-liushixin2@huawei.com
Fixes: f41f2ed4 (mm: hugetlb: free the vmemmap pages associated with each HugeTLB page)
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

After commit 0737e01d ("ocfs2: ocfs2_mount_volume does cleanup job
before return error"), any procedure after ocfs2_dlm_init() fails will
trigger crash when calling ocfs2_dlm_shutdown().

ie: On local mount mode, no dlm resource is initialized.  If
ocfs2_mount_volume() fails in ocfs2_find_slot(), error handling will call
ocfs2_dlm_shutdown(), then does dlm resource cleanup job, which will
trigger kernel crash.

This solution should bypass uninitialized resources in
ocfs2_dlm_shutdown().

Link: https://lkml.kernel.org/r/20220815085754.20417-1-heming.zhao@suse.com
Fixes: 0737e01d ("ocfs2: ocfs2_mount_volume does cleanup job before return error")
Signed-off-by: Heming Zhao <heming.zhao@suse.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

This reverts commit 96e51ccf.

Recently we started running the kernel with rstat infrastructure on
production traffic and begin to see negative memcg stats values. 
Particularly the 'sock' stat is the one which we observed having negative
value.

$ grep "sock " /mnt/memory/job/memory.stat
sock 253952
total_sock 18446744073708724224

Re-run after couple of seconds

$ grep "sock " /mnt/memory/job/memory.stat
sock 253952
total_sock 53248

For now we are only seeing this issue on large machines (256 CPUs) and
only with 'sock' stat.  I think the networking stack increase the stat on
one cpu and decrease it on another cpu much more often.  So, this negative
sock is due to rstat flusher flushing the stats on the CPU that has seen
the decrement of sock but missed the CPU that has increments.  A typical
race condition.

For easy stable backport, revert is the most simple solution.  For long
term solution, I am thinking of two directions.  First is just reduce the
race window by optimizing the rstat flusher.  Second is if the reader sees
a negative stat value, force flush and restart the stat collection. 
Basically retry but limited.

Link: https://lkml.kernel.org/r/20220817172139.3141101-1-shakeelb@google.com
Fixes: 96e51ccf ("memcg: cleanup racy sum avoidance code")
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Cc: "Michal Koutný" <mkoutny@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: <stable@vger.kernel.org>	[5.15]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

zsmalloc() now returns ERR_PTR values as handles, which zram accidentally
can pass to zs_free().  Another bad scenario is when zcomp_compress()
fails - handle has default -ENOMEM value, and zs_free() will try to free
that "pointer value".

Add the missing check and make sure that zs_free() bails out when
ERR_PTR() is passed to it.

Link: https://lkml.kernel.org/r/20220816050906.2583956-1-senozhatsky@chromium.org
Fixes: c7e6f17b ("zsmalloc: zs_malloc: return ERR_PTR on failure")
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>,
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Take the mmap_read_lock() when using the VMA in binder_alloc_print_pages()
and when checking for a VMA in binder_alloc_new_buf_locked().

It is worth noting binder_alloc_new_buf_locked() drops the VMA read lock
after it verifies a VMA exists, but may be taken again deeper in the call
stack, if necessary.

Link: https://lkml.kernel.org/r/20220810160209.1630707-1-Liam.Howlett@oracle.com
Fixes: a43cfc87 (android: binder: stop saving a pointer to the VMA)
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: Ondrej Mosnacek <omosnace@redhat.com>
Reported-by: <syzbot+a7b60a176ec13cafb793@syzkaller.appspotmail.com>
Acked-by: Carlos Llamas <cmllamas@google.com>
Tested-by: Ondrej Mosnacek <omosnace@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Christian Brauner (Microsoft) <brauner@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hridya Valsaraju <hridya@google.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Martijn Coenen <maco@android.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Todd Kjos <tkjos@android.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: "Arve Hjønnevåg" <arve@android.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

The below referenced commit makes the same error as 1c563432 ("mm: fix
is_pinnable_page against a cma page"), re-interpreting the logic to
exclude pinning of the zero page, which breaks device assignment with
vfio.

To avoid further subtle mistakes, split the logic into discrete tests.

[akpm@linux-foundation.org: simplify comment, per John]
Link: https://lkml.kernel.org/r/166015037385.760108.16881097713975517242.stgit@omen
Link: https://lore.kernel.org/all/165490039431.944052.12458624139225785964.stgit@omen
Fixes: f25cbb7a ("mm: add zone device coherent type memory support")
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Suggested-by: Matthew Wilcox <willy@infradead.org>
Suggested-by: Felix Kuehling <felix.kuehling@amd.com>
Tested-by: Slawomir Laba <slawomirx.laba@intel.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: Alex Sierra <alex.sierra@amd.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Alistair Popple <apopple@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

The rest of the kallsyms symbols are useless without knowing the number of
symbols in the table.  In an earlier patch, I somehow dropped the
kallsyms_num_syms symbol, so add it back in.

Link: https://lkml.kernel.org/r/20220808205410.18590-1-stephen.s.brennan@oracle.com
Fixes: 5fd8fea9 ("vmcoreinfo: include kallsyms symbols")
Signed-off-by: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Both @canonical and @ibm email addresses are invalid now; use my personal
address instead.

Link: https://lkml.kernel.org/r/20220804202207.439427-1-gpiccoli@igalia.comSigned-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

When a disk is removed, bdi_unregister gets called to stop further
writeback and wait for associated delayed work to complete.  However,
wb_inode_writeback_end() may schedule bandwidth estimation dwork after
this has completed, which can result in the timer attempting to access the
just freed bdi_writeback.

Fix this by checking if the bdi_writeback is alive, similar to when
scheduling writeback work.

Since this requires wb->work_lock, and wb_inode_writeback_end() may get
called from interrupt, switch wb->work_lock to an irqsafe lock.

Link: https://lkml.kernel.org/r/20220801155034.3772543-1-khazhy@google.com
Fixes: 45a2966f ("writeback: fix bandwidth estimate for spiky workload")
Signed-off-by: Khazhismel Kumykov <khazhy@google.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Michael Stapelberg <stapelberg+linux@google.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

If we allocate a new page, we need to make sure that our folio matches
that new page.

If we do end up in this code path, we store the wrong page in the shmem
inode's page cache, and I would rather imagine that data corruption
ensues.

This will be solved by changing shmem_replace_page() to
shmem_replace_folio(), but this is the minimal fix.

Link: https://lkml.kernel.org/r/20220730042518.1264767-1-willy@infradead.org
Fixes: da08e9b7 ("mm/shmem: convert shmem_swapin_page() to shmem_swapin_folio()")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

In MCOPY_ATOMIC_CONTINUE case with a non-shared VMA, pages in the page
cache are installed in the ptes.  But hugepage_add_new_anon_rmap is called
for them mistakenly because they're not vm_shared.  This will corrupt the
page->mapping used by page cache code.

Link: https://lkml.kernel.org/r/20220712130542.18836-1-linmiaohe@huawei.com
Fixes: f6191471 ("userfaultfd: add UFFDIO_CONTINUE ioctl")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>