An error occurred fetching the project authors.
- 22 Jun, 2015 4 commits
-
-
Richard Cochran authored
[ Upstream commit 397a253a ] Currently, the calibration function that corrects the initial offsets among multiple devices only works the first time. If the function is called more than once, the calibration fails and bogus offsets will be programmed into the devices. In a well hidden spot, the device documentation tells that trigger indexes 0 and 1 are special in allowing the TRIG_IF_LATE flag to actually work. This patch fixes the issue by using one of the special triggers during the recalibration method. Signed-off-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Thadeu Lima de Souza Cascardo authored
[ Upstream commit 47cc84ce ] When more than a multicast address is present in a MLDv2 report, all but the first address is ignored, because the code breaks out of the loop if there has not been an error adding that address. This has caused failures when two guests connected through the bridge tried to communicate using IPv6. Neighbor discoveries would not be transmitted to the other guest when both used a link-local address and a static address. This only happens when there is a MLDv2 querier in the network. The fix will only break out of the loop when there is a failure adding a multicast address. The mdb before the patch: dev ovirtmgmt port vnet0 grp ff02::1:ff7d:6603 temp dev ovirtmgmt port vnet1 grp ff02::1:ff7d:6604 temp dev ovirtmgmt port bond0.86 grp ff02::2 temp After the patch: dev ovirtmgmt port vnet0 grp ff02::1:ff7d:6603 temp dev ovirtmgmt port vnet1 grp ff02::1:ff7d:6604 temp dev ovirtmgmt port bond0.86 grp ff02::fb temp dev ovirtmgmt port bond0.86 grp ff02::2 temp dev ovirtmgmt port bond0.86 grp ff02::d temp dev ovirtmgmt port vnet0 grp ff02::1:ff00:76 temp dev ovirtmgmt port bond0.86 grp ff02::16 temp dev ovirtmgmt port vnet1 grp ff02::1:ff00:77 temp dev ovirtmgmt port bond0.86 grp ff02::1:ff00:def temp dev ovirtmgmt port bond0.86 grp ff02::1:ffa1:40bf temp Fixes: 08b202b6 ("bridge br_multicast: IPv6 MLD support.") Reported-by:
Rik Theys <Rik.Theys@esat.kuleuven.be> Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@redhat.com> Tested-by:
-
Eric W. Biederman authored
[ Upstream commit 381c759d ] ip_error does not check if in_dev is NULL before dereferencing it. IThe following sequence of calls is possible: CPU A CPU B ip_rcv_finish ip_route_input_noref() ip_route_input_slow() inetdev_destroy() dst_input() With the result that a network device can be destroyed while processing an input packet. A crash was triggered with only unicast packets in flight, and forwarding enabled on the only network device. The error condition was created by the removal of the network device. As such it is likely the that error code was -EHOSTUNREACH, and the action taken by ip_error (if in_dev had been accessible) would have been to not increment any counters and to have tried and likely failed to send an icmp error as the network device is going away. Therefore handle this weird case by just dropping the packet if !in_dev. It will result in dropping the packet sooner, and will not result in an actual change of behavior. Fixes: 251da413 ("ipv4: Cache ip_error() routes even when not forwarding.") Reported-by:
Vittorio Gambaletta <linuxbugs@vittgam.net> Tested-by:
"Eric W. Biederman" <ebiederm@xmission.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Florian Fainelli authored
[ Upstream commit 7e140696 ] RGMII interfaces come in multiple flavors: RGMII with transmit or receive internal delay, no delays at all, or delays in both direction. This change extends the initial check for PHY_INTERFACE_MODE_RGMII to cover all of these variants since EEE should be allowed for any of these modes, since it is a property of the RGMII, hence Gigabit PHY capability more than the RGMII electrical interface and its delays. Fixes: a59a4d19 ("phy: add the EEE support and the way to access to the MMD registers") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
- 06 Jun, 2015 36 commits
-
-
Greg Kroah-Hartman authored
-
Andrew Morton authored
commit 2b1d3ae9 upstream. load_elf_binary() returns `retval', not `error'. Fixes: a87938b2 ("fs/binfmt_elf.c: fix bug in loading of PIE binaries") Reported-by:
James Hogan <james.hogan@imgtec.com> Cc: Michael Davidson <md@google.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Sasha Levin authored
commit 161f873b upstream. We used to read file_handle twice. Once to get the amount of extra bytes, and once to fetch the entire structure. This may be problematic since we do size verifications only after the first read, so if the number of extra bytes changes in userspace between the first and second calls, we'll have an incoherent view of file_handle. Instead, read the constant size once, and copy that over to the final structure without having to re-read it again. Signed-off-by:
Sasha Levin <sasha.levin@oracle.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Rafael J. Wysocki authored
commit b9a5e5e1 upstream. Since acpi_reserve_resources() is defined as a device_initcall(), there's no guarantee that it will be executed in the right order with respect to the rest of the ACPI initialization code. On some systems this leads to breakage if, for example, the address range that should be reserved for the ACPI fixed registers is given to the PCI host bridge instead if the race is won by the wrong code path. Fix this by turning acpi_reserve_resources() into a void function and calling it directly from within the ACPI initialization sequence. Reported-and-tested-by:
George McCollister <george.mccollister@gmail.com> Link: http://marc.info/?t=143092384600002&r=1&w=2Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Benjamin Tissoires authored
commit 3c0213d1 upstream. When the v3 hardware sees more than one finger, it uses the semi-mt protocol to report the touches. However, it currently works when num_fingers is 0, 1 or 2, but when it is 3 and above, it sends only 1 finger as if num_fingers was 1. This confuses userspace which knows how to deal with extra fingers when all the slots are used, but not when some are missing. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=90101Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Larry Finger authored
commit 414b7e3b upstream. The USB mini-driver in rtlwifi, which is used by rtl8192cu, issues a call to usb_control_msg() with a timeout value of 0. In some instances where the interface is shutting down, this infinite wait results in a CPU deadlock. A one second timeout fixes this problem without affecting any normal operations. This bug is reported at https://bugzilla.novell.com/show_bug.cgi?id=927786. Reported-by:
Bernhard Wiedemann <bwiedemann@suse.com> Tested-by:
Larry Finger <Larry.Finger@lwfinger.net> Cc: Bernhard Wiedemann <bwiedemann@suse.com> Cc: Takashi Iwai<tiwai@suse.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
NeilBrown authored
commit 6e9eac2d upstream. If any memory allocation in resize_stripes fails we will return -ENOMEM, but in some cases we update conf->pool_size anyway. This means that if we try again, the allocations will be assumed to be larger than they are, and badness results. So only update pool_size if there is no error. This bug was introduced in 2.6.17 and the patch is suitable for -stable. Fixes: ad01c9e3 ("[PATCH] md: Allow stripes to be expanded in preparation for expanding an array") Signed-off-by:
NeilBrown <neilb@suse.de> Signed-off-by:
-
Scott Mayhew authored
commit 9507271d upstream. In an environment where the KDC is running Active Directory, the exported composite name field returned in the context could be large enough to span a page boundary. Attaching a scratch buffer to the decoding xdr_stream helps deal with those cases. The case where we saw this was actually due to behavior that's been fixed in newer gss-proxy versions, but we're fixing it here too. Signed-off-by:
Scott Mayhew <smayhew@redhat.com> Reviewed-by:
Simo Sorce <simo@redhat.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Russell King authored
commit 1b979372 upstream. Josh Stone reports: I've discovered a case where both arm and arm64 will miss a ptrace syscall-exit that they should report. If the syscall is entered without TIF_SYSCALL_TRACE set, then it goes on the fast path. It's then possible to have TIF_SYSCALL_TRACE added in the middle of the syscall, but ret_fast_syscall doesn't check this flag again. Fix this by always checking for a syscall trace in the fast exit path. Reported-by:
Josh Stone <jistone@redhat.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Philippe Reynes authored
commit a29ef819 upstream. According to the imx27 documentation, fec has a 4 Kbyte memory space map. Moreover, the actual 16 Kbyte mapping overlaps the SCC (Security Controller) memory register space. So, we reduce the memory register space to 4 Kbyte. Signed-off-by:
Philippe Reynes <tremyfr@gmail.com> Acked-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Fixes: 9f0749e3 ("ARM i.MX27: Add devicetree support") Signed-off-by:
Shawn Guo <shawn.guo@linaro.org> Signed-off-by:
-
Harald Freudenberger authored
commit a1cae34e upstream. Multitheaded tests showed that the icv buffer in the current ghash implementation is not handled correctly. A move of this working ghash buffer value to the descriptor context fixed this. Code is tested and verified with an multithreaded application via af_alg interface. Signed-off-by:
Harald Freudenberger <freude@linux.vnet.ibm.com> Signed-off-by:
Gerald Schaefer <geraldsc@linux.vnet.ibm.com> Reported-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Scott Branden authored
commit ea345c14 upstream. Add the USB Id to link the D-Link DWA 130 USB Wifi adapter to the rt2830 driver. Signed-off-by:
Scott Branden <sbranden@broadcom.com> Signed-off-by:
Pieter Truter <ptruter@broadcom.com> Signed-off-by:
-
Gabriele Mazzotta authored
commit 09c5b480 upstream. When the LPM policy is set to ATA_LPM_MAX_POWER, the device might generate a spurious PHY event that cuases errors on the link. Ignore this event if it occured within 10s after the policy change. The timeout was chosen observing that on a Dell XPS13 9333 these spurious events can occur up to roughly 6s after the policy change. Link: http://lkml.kernel.org/g/3352987.ugV1Ipy7Z5@xps13Signed-off-by:
Gabriele Mazzotta <gabriele.mzt@gmail.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Gabriele Mazzotta authored
commit 8393b811 upstream. This is a preparation commit that will allow to add other criteria according to which PHY events should be dropped. Signed-off-by:
-
Eryu Guan authored
commit 2f974865 upstream. The following commit introduced a bug when checking for zero length extent 5946d089 ext4: check for overlapping extents in ext4_valid_extent_entries() Zero length extent could pass the check if lblock is zero. Adding the explicit check for zero length back. Signed-off-by:
Eryu Guan <guaneryu@gmail.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Dmitry Monakhov authored
commit 7afe5aa5 upstream. Use wait_for_stable_page() instead of wait_on_page_writeback() Signed-off-by:
Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by:
Jan Kara <jack@suse.cz> Cc: Alex Shi <alex.shi@linaro.org> Signed-off-by:
-
Ludovic Desroches authored
commit 60c8f783 upstream. clkdiv is declared as an u32 but it can be set to a negative value causing a huge divisor value. Change its type to int to avoid this case. Signed-off-by:
Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Anton Blanchard authored
commit 5e95235c upstream. Recent toolchains force the TOC to be 256 byte aligned. We need to enforce this alignment in our linker script, otherwise pointers to our TOC variables (__toc_start, __prom_init_toc_start) could be incorrect. If they are bad, we die a few hundred instructions into boot. Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Krzysztof Opasiak authored
commit 903124fe upstream. memset() to 0 interfaces array before reusing usb_configuration structure. This commit fix bug: ln -s functions/acm.1 configs/c.1 ln -s functions/acm.2 configs/c.1 ln -s functions/acm.3 configs/c.1 echo "UDC name" > UDC echo "" > UDC rm configs/c.1/acm.* rmdir functions/* mkdir functions/ecm.usb0 ln -s functions/ecm.usb0 configs/c.1 echo "UDC name" > UDC [ 82.220969] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 82.229009] pgd = c0004000 [ 82.231698] [00000000] *pgd=00000000 [ 82.235260] Internal error: Oops: 17 [#1] PREEMPT SMP ARM [ 82.240638] Modules linked in: [ 82.243681] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.0.0-rc2 #39 [ 82.249926] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 82.256003] task: c07cd2f0 ti: c07c8000 task.ti: c07c8000 [ 82.261393] PC is at composite_setup+0xe3c/0x1674 [ 82.266073] LR is at composite_setup+0xf20/0x1674 [ 82.270760] pc : [<c03510d4>] lr : [<c03511b8>] psr: 600001d3 [ 82.270760] sp : c07c9df0 ip : c0806448 fp : ed8c9c9c [ 82.282216] r10: 00000001 r9 : 00000000 r8 : edaae918 [ 82.287425] r7 : ed551cc0 r6 : 00007fff r5 : 00000000 r4 : ed799634 [ 82.293934] r3 : 00000003 r2 : 00010002 r1 : edaae918 r0 : 0000002e [ 82.300446] Flags: nZCv IRQs off FIQs off Mode SVC_32 ISA ARM Segment kernel [ 82.307910] Control: 10c5387d Table: 6bc1804a DAC: 00000015 [ 82.313638] Process swapper/0 (pid: 0, stack limit = 0xc07c8210) [ 82.319627] Stack: (0xc07c9df0 to 0xc07ca000) [ 82.323969] 9de0: 00000000 c06e65f4 00000000 c07c9f68 [ 82.332130] 9e00: 00000067 c07c59ac 000003f7 edaae918 ed8c9c98 ed799690 eca2f140 200001d3 [ 82.340289] 9e20: ee79a2d8 c07c9e88 c07c5304 ffff55db 00010002 edaae810 edaae860 eda96d50 [ 82.348448] 9e40: 00000009 ee264510 00000007 c07ca444 edaae860 c0340890 c0827a40 ffff55e0 [ 82.356607] 9e60: c0827a40 eda96e40 ee264510 edaae810 00000000 edaae860 00000007 c07ca444 [ 82.364766] 9e80: edaae860 c0354170 c03407dc c033db4c edaae810 00000000 00000000 00000010 [ 82.372925] 9ea0: 00000032 c0341670 00000000 00000000 00000001 eda96e00 00000000 00000000 [ 82.381084] 9ec0: 00000000 00000032 c0803a23 ee1aa840 00000001 c005d54c 249e2450 00000000 [ 82.389244] 9ee0: 200001d3 ee1aa840 ee1aa8a0 ed84f4c0 00000000 c07c9f68 00000067 c07c59ac [ 82.397403] 9f00: 00000000 c005d688 ee1aa840 ee1aa8a0 c07db4b4 c006009c 00000032 00000000 [ 82.405562] 9f20: 00000001 c005ce20 c07c59ac c005cf34 f002000c c07ca780 c07c9f68 00000057 [ 82.413722] 9f40: f0020000 413fc090 00000001 c00086b4 c000f804 60000053 ffffffff c07c9f9c [ 82.421880] 9f60: c0803a20 c0011fc0 00000000 00000000 c07c9fb8 c001bee0 c07ca4f0 c057004c [ 82.430040] 9f80: c07ca4fc c0803a20 c0803a20 413fc090 00000001 00000000 01000000 c07c9fb0 [ 82.438199] 9fa0: c000f800 c000f804 60000053 ffffffff 00000000 c0050e70 c0803bc0 c0783bd8 [ 82.446358] 9fc0: ffffffff ffffffff c0783664 00000000 00000000 c07b13e8 00000000 c0803e54 [ 82.454517] 9fe0: c07ca480 c07b13e4 c07ce40c 4000406a 00000000 40008074 00000000 00000000 [ 82.462689] [<c03510d4>] (composite_setup) from [<c0340890>] (s3c_hsotg_complete_setup+0xb4/0x418) [ 82.471626] [<c0340890>] (s3c_hsotg_complete_setup) from [<c0354170>] (usb_gadget_giveback_request+0xc/0x10) [ 82.481429] [<c0354170>] (usb_gadget_giveback_request) from [<c033db4c>] (s3c_hsotg_complete_request+0xcc/0x12c) [ 82.491583] [<c033db4c>] (s3c_hsotg_complete_request) from [<c0341670>] (s3c_hsotg_irq+0x4fc/0x558) [ 82.500614] [<c0341670>] (s3c_hsotg_irq) from [<c005d54c>] (handle_irq_event_percpu+0x50/0x150) [ 82.509291] [<c005d54c>] (handle_irq_event_percpu) from [<c005d688>] (handle_irq_event+0x3c/0x5c) [ 82.518145] [<c005d688>] (handle_irq_event) from [<c006009c>] (handle_fasteoi_irq+0xd4/0x18c) [ 82.526650] [<c006009c>] (handle_fasteoi_irq) from [<c005ce20>] (generic_handle_irq+0x20/0x30) [ 82.535242] [<c005ce20>] (generic_handle_irq) from [<c005cf34>] (__handle_domain_irq+0x6c/0xdc) [ 82.543923] [<c005cf34>] (__handle_domain_irq) from [<c00086b4>] (gic_handle_irq+0x2c/0x6c) [ 82.552256] [<c00086b4>] (gic_handle_irq) from [<c0011fc0>] (__irq_svc+0x40/0x74) [ 82.559716] Exception stack(0xc07c9f68 to 0xc07c9fb0) [ 82.564753] 9f60: 00000000 00000000 c07c9fb8 c001bee0 c07ca4f0 c057004c [ 82.572913] 9f80: c07ca4fc c0803a20 c0803a20 413fc090 00000001 00000000 01000000 c07c9fb0 [ 82.581069] 9fa0: c000f800 c000f804 60000053 ffffffff [ 82.586113] [<c0011fc0>] (__irq_svc) from [<c000f804>] (arch_cpu_idle+0x30/0x3c) [ 82.593491] [<c000f804>] (arch_cpu_idle) from [<c0050e70>] (cpu_startup_entry+0x128/0x1a4) [ 82.601740] [<c0050e70>] (cpu_startup_entry) from [<c0783bd8>] (start_kernel+0x350/0x3bc) [ 82.609890] Code: 0a000002 e3530005 05975010 15975008 (e5953000) [ 82.615965] ---[ end trace f57d5f599a5f1bfa ]--- Most of kernel code assume that interface array in struct usb_configuration is NULL terminated. When gadget is composed with configfs configuration structure may be reused for different functions set. This bug happens because purge_configs_funcs() sets only next_interface_id to 0. Interface array still contains pointers to already freed interfaces. If in second try we add less interfaces than earlier we may access unallocated memory when trying to get interface descriptors. Signed-off-by:
Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
-
Hans de Goede authored
commit 17211509 upstream. Without this flag some versions of these enclosures do not work. Reported-and-tested-by:
Christian Schaller <cschalle@redhat.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Mark Edwards authored
commit c735ed74 upstream. Added the USB serial console device ID for KCF Technologies PRN device which has a USB port for its serial console. Signed-off-by:
Mark Edwards <sonofaforester@gmail.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Jason A. Donenfeld authored
commit 48ef23a4 upstream. This phone is already supported by the visor driver. Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Jason A. Donenfeld authored
commit 82ee3aeb upstream. Samsung has just released a portable USB3 SSD, coming in a very small and nice form factor. It's USB ID is 04e8:8001, which unfortunately is already used by the Palm Visor driver for the Samsung I330 phone cradle. Having pl2303 or visor pick up this device ID results in conflicts with the usb-storage driver, which handles the newly released portable USB3 SSD. To work around this conflict, I've dug up a mailing list post [1] from a long time ago, in which a user posts the full USB descriptor information. The most specific value in this appears to be the interface class, which has value 255 (0xff). Since usb-storage requires an interface class of 0x8, I believe it's correct to disambiguate the two devices by matching on 0xff inside visor. [1] http://permalink.gmane.org/gmane.linux.usb.user/4264Signed-off-by:
-
Joe Lawrence authored
commit 948fa135 upstream. If the xHCI host controller has died (ie, device removed) or suffered other serious fatal error (STS_FATAL), then xhci_irq should handle this condition with IRQ_HANDLED instead of -ESHUTDOWN. Signed-off-by:
Joe Lawrence <joe.lawrence@stratus.com> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Mathias Nyman authored
commit 18cc2f4c upstream. Our event ring consists of only one segment, and we risk filling the event ring in case we get isoc transfers with short intervals such as webcams that fill a TD every microframe (125us) With 64 TRB segment size one usb camera could fill the event ring in 8ms. A setup with several cameras and other devices can fill up the event ring as it is shared between all devices. This has occurred when uvcvideo queues 5 * 32TD URBs which then get cancelled when the video mode changes. The cancelled URBs are returned in the xhci interrupt context and blocks the interrupt handler from handling the new events. A full event ring will block xhci from scheduling traffic and affect all devices conneted to the xhci, will see errors such as Missed Service Intervals for isoc devices, and and Split transaction errors for LS/FS interrupt devices. Increasing the TRB_PER_SEGMENT will also increase the default endpoint ring size, which is welcome as for most isoc transfer we had to dynamically expand the endpoint ring anyway to be able to queue the 5 * 32TDs uvcvideo queues. The default size used to be 64 TRBs per segment Signed-off-by:
-
Mathias Nyman authored
commit d104d015 upstream. Isoc TDs usually consist of one TRB, sometimes two. When all goes well we receive only one success event for a TD, and move the dequeue pointer to the next TD. This fails if the TD consists of two TRBs and we get a transfer error on the first TRB, we will then see two events for that TD. Fix this by making sure the event we get is for the last TRB in that TD before moving the dequeue pointer to the next TD. This will resolve some of the uvc and dvb issues with the "ERROR Transfer event TRB DMA ptr not part of current TD" error message Signed-off-by:
-
Andy Grover authored
commit 5a7125c6 upstream. See https://bugzilla.redhat.com/show_bug.cgi?id=1025672 We need to put() the reference to the scsi host that we got in pscsi_configure_device(). In VIRTUAL_HOST mode it is associated with the dev_virt, not the hba_virt. Signed-off-by:
Andy Grover <agrover@redhat.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Zidan Wang authored
commit 17fc2e0a upstream. According to the RM of wm8958, BCLK DIV 348 doesn't exist, correct it to 384. Signed-off-by:
Zidan Wang <zidan.wang@freescale.com> Acked-by:
Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Zidan Wang authored
commit 85e36a1f upstream. It should be "RINPUT3" instead of "LINPUT3" route to "Right Input Mixer". Signed-off-by:
-
Axel Lin authored
commit 545774bd upstream. mc13xxx_reg_rmw() won't change any bit if passing 0 to the mask field. Pass AUDIO_SSI_SEL instead of 0 for the mask field to set AUDIO_SSI_SEL bit. Signed-off-by:
Axel Lin <axel.lin@ingics.com> Signed-off-by:
-
Takashi Iwai authored
commit 88776f36 upstream. Fujitsu Lifebook E752 laptop needs a similar quirk done for Lifebook T731. Otherwise the headphone is always muted. Reported-and-tested-by:
Christian Weber <we_chris@hotmail.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
David Henningsson authored
commit 6ffc0898 upstream. This patch adds support for Conexant HD Audio codecs CX20721, CX20722, CX20723 and CX20724. BugLink: https://bugs.launchpad.net/bugs/1454656Signed-off-by:
David Henningsson <david.henningsson@canonical.com> Signed-off-by:
-
Al Viro authored
commit 2159184e upstream. when we find that a child has died while we'd been trying to ascend, we should go into the first live sibling itself, rather than its sibling. Off-by-one in question had been introduced in "deal with deadlock in d_walk()" and the fix needs to be backported to all branches this one has been backported to. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Jan Kara authored
commit f18c34e4 upstream. If the specified maximum length of the string is a multiple of unsigned long, we would load one long behind the specified maximum. If that happens to be in a next page, we can hit a page fault although we were not expected to. Fix the off-by-one bug in the test whether we are at the end of the specified range. Signed-off-by:
-
Chris Lesiak authored
commit adba6575 upstream. When configured via device tree, the associated iio device needs to be measuring voltage for the conversion to resistance to be correct. Return -EINVAL if that is not the case. Signed-off-by:
Chris Lesiak <chris.lesiak@licor.com> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Ilya Dryomov authored
commit b0494532 upstream. This commit does two things. First, if there are any homeless lingering requests, we now request a new osdmap even if the osdmap that is being processed brought no changes, i.e. if a given lingering request turned homeless in one of the previous epochs and remained homeless in the current epoch. Not doing so leaves us with a stale osdmap and as a result we may miss our window for reestablishing the watch and lose notifies. MON=1 OSD=1: # cat linger-needmap.sh #!/bin/bash rbd create --size 1 test DEV=$(rbd map test) ceph osd out 0 rbd map dne/dne # obtain a new osdmap as a side effect (!) sleep 1 ceph osd in 0 rbd resize --size 2 test # rbd info test | grep size -> 2M # blockdev --getsize $DEV -> 1M N.B.: Not obtaining a new osdmap in between "osd out" and "osd in" above is enough to make it miss that resize notify, but that is a bug^Wlimitation of ceph watch/notify v1. Second, homeless lingering requests are now kicked just like those lingering requests whose mapping has changed. This is mainly to recognize that a homeless lingering request makes no sense and to preserve the invariant that a registered lingering request is not sitting on any of r_req_lru_item lists. This spares us a WARN_ON, which commit ba9d114e ("libceph: clear r_req_lru_item in __unregister_linger_request()") tried to fix the _wrong_ way. Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Reviewed-by:
Sage Weil <sage@redhat.com> Signed-off-by:
-
