The KUnit device helpers are documented with kerneldoc in their header
file, but also have short comments over their implementation. These were
mistakenly formatted as kerneldoc comments, even though they're not
valid kerneldoc. It shouldn't cause any serious problems -- this file
isn't included in the docs -- but it could be confusing, and causes
warnings.

Remove the extra '*' so that these aren't treated as kerneldoc.

Fixes: d03c720e ("kunit: Add APIs for managing devices")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312181920.H4EPAH20-lkp@intel.com/Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

Add NULL checks to KUNIT_BINARY_STR_ASSERTION() so that it will fail
cleanly if either pointer is NULL, instead of causing a NULL pointer
dereference in the strcmp().

A test failure could be that a string is unexpectedly NULL. This could
be trapped by KUNIT_ASSERT_NOT_NULL() but that would terminate the test
at that point. It's preferable that the KUNIT_EXPECT_STR*() macros can
handle NULL pointers as a failure.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

Adds a variant of example_static_stub_test() that shows use of a
pointer-to-function with kunit_activate_static_stub().

A const pointer to the add_one() function is declared. This
pointer-to-function is passed to kunit_activate_static_stub() and
kunit_deactivate_static_stub() instead of passing add_one directly.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

Swap the arguments to typecheck_fn() in kunit_activate_static_stub()
so that real_fn_addr can be either the function itself or a pointer
to that function.

This is useful to simplify redirecting static functions in a module.
Having to pass the actual function meant that it must be exported
from the module. Either making the 'static' and EXPORT_SYMBOL*()
conditional (which makes the code messy), or change it to always
exported (which increases the export namespace and prevents the
compiler inlining a trivial stub function in non-test builds).

With the original definition of kunit_activate_static_stub() the
address of real_fn_addr was passed to typecheck_fn() as the type to
be passed. This meant that if real_fn_addr was a pointer-to-function
it would resolve to a ** instead of a *, giving an error like this:

   error: initialization of ‘int (**)(int)’ from incompatible pointer
   type ‘int (*)(int)’ [-Werror=incompatible-pointer-types]
   kunit_activate_static_stub(test, add_one_fn_ptr, subtract_one);
      |                             ^~~~~~~~~~~~
   ./include/linux/typecheck.h:21:25: note: in definition of macro
   ‘typecheck_fn’
   21 | ({ typeof(type) __tmp = function; \

Swapping the arguments to typecheck_fn makes it take the type of a
pointer to the replacement function. Either a function or a pointer
to function can be assigned to that. For example:

static int some_function(int x)
{
    /* whatever */
}

int (* some_function_ptr)(int) = some_function;

static int replacement(int x)
{
    /* whatever */
}

Then:
  kunit_activate_static_stub(test, some_function, replacement);
yields:
  typecheck_fn(typeof(&replacement), some_function);

and:
  kunit_activate_static_stub(test, some_function_ptr, replacement);
yields:
  typecheck_fn(typeof(&replacement), some_function_ptr);

The two typecheck_fn() then resolve to:

  int (*__tmp)(int) = some_function;
and
  int (*__tmp)(int) = some_function_ptr;

Both of these are valid. In the first case the compiler inserts
an implicit '&' to take the address of the supplied function, and
in the second case the RHS is already a pointer to the same type.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

suite->log must be checked for NULL before passing it to
string_stream_clear(). This was done in kunit_init_test() but was missing
from kunit_init_suite().
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 6d696c4695c5 ("kunit: add ability to run tests after boot using debugfs")
Reviewed-by: Rae Moar <rmoar@google.com>
Acked-by: David Gow <davidgow@google.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

If we run parameterized test that uses test->priv to prepare some
custom data, then value of test->priv will leak to the next param
iteration and may be unexpected.  This could be easily seen if
we promote example_priv_test to parameterized test as then only
first test iteration will be successful:

$ ./tools/testing/kunit/kunit.py run \
	--kunitconfig ./lib/kunit/.kunitconfig *.example_priv*

[ ] Starting KUnit Kernel (1/1)...
[ ] ============================================================
[ ] =================== example (1 subtest) ====================
[ ] ==================== example_priv_test  ====================
[ ] [PASSED] example value 3
[ ] # example_priv_test: initializing
[ ] # example_priv_test: ASSERTION FAILED at lib/kunit/kunit-example-test.c:230
[ ] Expected test->priv == ((void *)0), but
[ ]     test->priv == 0000000060dfe290
[ ]     ((void *)0) == 0000000000000000
[ ] # example_priv_test: cleaning up
[ ] [FAILED] example value 2
[ ] # example_priv_test: initializing
[ ] # example_priv_test: ASSERTION FAILED at lib/kunit/kunit-example-test.c:230
[ ] Expected test->priv == ((void *)0), but
[ ]     test->priv == 0000000060dfe290
[ ]     ((void *)0) == 0000000000000000
[ ] # example_priv_test: cleaning up
[ ] [FAILED] example value 1
[ ] # example_priv_test: initializing
[ ] # example_priv_test: ASSERTION FAILED at lib/kunit/kunit-example-test.c:230
[ ] Expected test->priv == ((void *)0), but
[ ]     test->priv == 0000000060dfe290
[ ]     ((void *)0) == 0000000000000000
[ ] # example_priv_test: cleaning up
[ ] [FAILED] example value 0
[ ] # example_priv_test: initializing
[ ] # example_priv_test: cleaning up
[ ] # example_priv_test: pass:1 fail:3 skip:0 total:4
[ ] ================ [FAILED] example_priv_test ================
[ ]     # example: initializing suite
[ ]     # module: kunit_example_test
[ ]     # example: exiting suite
[ ] # Totals: pass:1 fail:3 skip:0 total:4
[ ] ===================== [FAILED] example =====================

Fix that by resetting test->priv after each param iteration, in
similar way what we did for the test->status.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: David Gow <davidgow@google.com>
Cc: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

In a test->priv field the user can store arbitrary data.
Add example how to use this feature in the test code.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: David Gow <davidgow@google.com>
Cc: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

Kunit recently gained helpers to create test managed devices. This means
that we no longer have to roll our own helpers in KMS and we can reuse
them.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Tested-by: David Gow <davidgow@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

Using struct root_device to create fake devices for tests is something
of a hack. The new struct kunit_device is meant for this purpose, so use
it instead.
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

Using struct root_device to create fake devices for tests is something
of a hack. The new struct kunit_device is meant for this purpose, so use
it instead.
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

Using struct root_device to create fake devices for tests is something
of a hack. The new struct kunit_device is meant for this purpose, so use
it instead.
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

Tests for drivers often require a struct device to pass to other
functions. While it's possible to create these with
root_device_register(), or to use something like a platform device, this
is both a misuse of those APIs, and can be difficult to clean up after,
for example, a failed assertion.

Add some KUnit-specific functions for registering and unregistering a
struct device:
- kunit_device_register()
- kunit_device_register_with_driver()
- kunit_device_unregister()

These helpers allocate a on a 'kunit' bus which will either probe the
driver passed in (kunit_device_register_with_driver), or will create a
stub driver (kunit_device_register) which is cleaned up on test shutdown.

Devices are automatically unregistered on test shutdown, but can be
manually unregistered earlier with kunit_device_unregister() in order
to, for example, test device release code.
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

Expand the documentation on the KUnit debugfs filesystem on the
run_manual.rst page.

Add section describing how to access results using debugfs.

Add section describing how to run tests after boot using debugfs.
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Rae Moar <rmoar@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

Add functionality to run built-in tests after boot by writing to a
debugfs file.

Add a new debugfs file labeled "run" for each test suite to use for
this purpose.

As an example, write to the file using the following:

echo "any string" > /sys/kernel/debugfs/kunit/<testsuite>/run

This will trigger the test suite to run and will print results to the
kernel log.

To guard against running tests concurrently with this feature, add a
mutex lock around running kunit. This supports the current practice of
not allowing tests to be run concurrently on the same kernel.

This new functionality could be used to design a parameter
injection feature in the future.

Fixed up merge conflict duing rebase to Linux 6.7-rc6
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Rae Moar <rmoar@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

Add is_init test attribute of type bool. Add to_string, get, and filter
methods to lib/kunit/attributes.c.

Mark each of the tests in the init section with the is_init=true attribute.

Add is_init to the attributes documentation.
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Rae Moar <rmoar@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

Add example_init_test_suite to allow for testing the feature of running
test suites marked as init to indicate they use init data and/or
functions.

This suite should always pass and uses a simple init function.

This suite can also be used to test the is_init attribute introduced in
the next patch.
Signed-off-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

Add KUNIT_INIT_TABLE to the INIT_DATA linker section.

Alter the KUnit macros to create init tests:
kunit_test_init_section_suites

Update lib/kunit/executor.c to run both the suites in KUNIT_TABLE and
KUNIT_INIT_TABLE.
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Rae Moar <rmoar@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

Alter the linker section of KUNIT_TABLE to move it out of INIT_DATA and
into DATA_DATA.

Data for KUnit tests does not need to be in the init section.

In order to run tests again after boot the KUnit data cannot be labeled as
init data as the kernel could write over it.

Add a KUNIT_INIT_TABLE in the next patch for KUnit tests that test init
data/functions.
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Rae Moar <rmoar@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

Add test for parsing attributes to kunit_tool_test.py. Test checks
attributes are parsed and saved in the test logs.

This test also checks that the attributes have not interfered with the
parsing of other test information, specifically the suite header as
the test plan was being incorrectely parsed.
Signed-off-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

Add parsing of attributes as diagnostic data. Fixes issue with test plan
being parsed incorrectly as diagnostic data when located after
suite-level attributes.

Note that if there does not exist a test plan line, the diagnostic lines
between the suite header and the first result will be saved in the suite
log rather than the first test case log.
Signed-off-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

In kunit_debugfs_create_suite() give up and skip creating the debugfs
file if any of the alloc_string_stream() calls return an error or NULL.
Only put a value in the log pointer of kunit_suite and kunit_test if it
is a valid pointer to a log.

This prevents the potential invalid dereference reported by smatch:

 lib/kunit/debugfs.c:115 kunit_debugfs_create_suite() error: 'suite->log'
	dereferencing possible ERR_PTR()
 lib/kunit/debugfs.c:119 kunit_debugfs_create_suite() error: 'test_case->log'
	dereferencing possible ERR_PTR()
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes: 05e2006c ("kunit: Use string_stream for test log")
Reviewed-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

Move the call to kunit_suite_has_succeeded() after the check that
the kunit_suite pointer is valid.

This was found by smatch:

 lib/kunit/debugfs.c:66 debugfs_print_results() warn: variable
 dereferenced before check 'suite' (see line 63)
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes: 38289a26 ("kunit: fix debugfs code to use enum kunit_status, not bool")
Reviewed-by: Rae Moar <rmoar@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

Check the stream pointer passed to string_stream_destroy() for
IS_ERR_OR_NULL() instead of only NULL.

Whatever alloc_string_stream() returns should be safe to pass
to string_stream_destroy(), and that will be an ERR_PTR.

It's obviously good practise and generally helpful to also check
for NULL pointers so that client cleanup code can call
string_stream_destroy() unconditionally - which could include
pointers that have never been set to anything and so are NULL.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

Passing a gfp_t to KUNIT_EXPECT_EQ() causes a cast warning:

  lib/kunit/string-stream-test.c:73:9: sparse: sparse: incorrect type in
  initializer (different base types) expected long long right_value
  got restricted gfp_t const __right

Avoid this by testing stream->gfp for the expected value and passing the
boolean result of this comparison to KUNIT_EXPECT_TRUE(), as was already
done a few lines above in string_stream_managed_init_test().
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: d1a0d699 ("kunit: string-stream: Add tests for freeing resource-managed string_stream")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311181918.0mpCu2Xh-lkp@intel.com/Reviewed-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

In order to pass functions to kunit_add_action(), they need to be of the
kunit_action_t type. While casting the function pointer can work, it
will break control-flow integrity.

vc4_mock already defines such a wrapper for drm_dev_unregister(), but it
involves less boilerplate to use the new macro, so replace the manual
implementation.
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

In order to pass functions to kunit_add_action(), they need to be of the
kunit_action_t type. While casting the function pointer can work, it
will break control-flow integrity.

drm_kunit_helpers already defines wrappers, but we now have a macro
which does this automatically. Using this greatly reduces the
boilerplate needed.
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

KUnit's deferred action API accepts a void(*)(void *) function pointer
which is called when the test is exited. However, we very frequently
want to use existing functions which accept a single pointer, but which
may not be of type void*. While this is probably dodgy enough to be on
the wrong side of the C standard, it's been often used for similar
callbacks, and gcc's -Wcast-function-type seems to ignore cases where
the only difference is the type of the argument, assuming it's
compatible (i.e., they're both pointers to data).

However, clang 16 has introduced -Wcast-function-type-strict, which no
longer permits any deviation in function pointer type. This seems to be
because it'd break CFI, which validates the type of function calls.

This rather ruins our attempts to cast functions to defer them, and
leaves us with a few options. The one we've chosen is to implement a
macro which will generate a wrapper function which accepts a void*, and
casts the argument to the appropriate type.

For example, if you were trying to wrap:
void foo_close(struct foo *handle);
you could use:
KUNIT_DEFINE_ACTION_WRAPPER(kunit_action_foo_close,
			    foo_close,
			    struct foo *);

This would create a new kunit_action_foo_close() function, of type
kunit_action_t, which could be passed into kunit_add_action() and
similar functions.

In addition to defining this macro, update KUnit and its tests to use
it.

Link: https://github.com/ClangBuiltLinux/linux/issues/1750Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

Pull perf fix from Borislav Petkov:

 - Avoid iterating over newly created group leader event's siblings
   because there are none, and thus prevent a lockdep splat

* tag 'perf_urgent_for_v6.7_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf: Fix perf_event_validate_size() lockdep splat

Pull btrfs fix from David Sterba:
 "One more fix that verifies that the snapshot source is a root, same
  check is also done in user space but should be done by the ioctl as
  well"

* tag 'for-6.7-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: do not allow non subvolume root targets for snapshot

Pull soundwire fixes from Vinod Koul:

 - Null pointer dereference for mult link in core

 - AC timing fix in intel driver

* tag 'soundwire-6.7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
  soundwire: intel_ace2x: fix AC timing setting for ACE2.x
  soundwire: stream: fix NULL pointer dereference for multi_link

Pull phy fixes from Vinod Koul:

  - register offset fix for TI driver

  - mediatek driver minimal supported frequency fix

  - negative error code in probe fix for sunplus driver

* tag 'phy-fixes-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
  phy: sunplus: return negative error code in sp_usb_phy_probe
  phy: mediatek: mipi: mt8183: fix minimal supported frequency
  phy: ti: gmii-sel: Fix register offset when parent is not a syscon node

Pull dmaengine fixes from Vinod Koul:

 - SPI PDMA data fix for TI k3-psil drivers

 - suspend fix, pointer check, logic for arbitration fix and channel
   leak fix in fsl-edma driver

 - couple of fixes in idxd driver for GRPCFG descriptions and int_handle
   field handling

 - single fix for stm32 driver for bitfield overflow

* tag 'dmaengine-fix-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
  dmaengine: fsl-edma: fix DMA channel leak in eDMAv4
  dmaengine: fsl-edma: fix wrong pointer check in fsl_edma3_attach_pd()
  dmaengine: idxd: Fix incorrect descriptions for GRPCFG register
  dmaengine: idxd: Protect int_handle field in hw descriptor
  dmaengine: stm32-dma: avoid bitfield overflow assertion
  dmaengine: fsl-edma: Add judgment on enabling round robin arbitration
  dmaengine: fsl-edma: Do not suspend and resume the masked dma channel when the system is sleeping
  dmaengine: ti: k3-psil-am62a: Fix SPI PDMA data
  dmaengine: ti: k3-psil-am62: Fix SPI PDMA data

Pull CXL (Compute Express Link) fixes from Dan Williams:
 "A collection of CXL fixes.

  The touch outside of drivers/cxl/ is for a helper that allocates
  physical address space. Device hotplug tests showed that the driver
  failed to utilize (skipped over) valid capacity when allocating a new
  memory region. Outside of that, new tests uncovered a small crop of
  lockdep reports.

  There is also some miscellaneous error path and leak fixups that are
  not urgent, but useful to cleanup now.

   - Fix alloc_free_mem_region()'s scan for address space, prevent false
     negative out-of-space events

   - Fix sleeping lock acquisition from CXL trace event (atomic context)

   - Fix put_device() like for the new CXL PMU driver

   - Fix wrong pointer freed on error path

   - Fixup several lockdep reports (missing lock hold) from new
     assertion in cxl_num_decoders_committed() and new tests"

* tag 'cxl-fixes-6.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
  cxl/pmu: Ensure put_device on pmu devices
  cxl/cdat: Free correct buffer on checksum error
  cxl/hdm: Fix dpa translation locking
  kernel/resource: Increment by align value in get_free_mem_region()
  cxl: Add cxl_num_decoders_committed() usage to cxl_test
  cxl/memdev: Hold region_rwsem during inject and clear poison ops
  cxl/core: Always hold region_rwsem while reading poison lists
  cxl/hdm: Fix a benign lockdep splat

Pull EDAC fix from Borislav Petkov:

 - A single fix for the EDAC Versal driver to read out register fields
   properly

* tag 'edac_urgent_for_v6.7_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  EDAC/versal: Read num_csrows and num_chans using the correct bitfield macro

Pull powerpc fixes from Michael Ellerman:

 - Fix a bug where heavy VAS (accelerator) usage could race with
   partition migration and prevent the migration from completing.

 - Update MAINTAINERS to add Aneesh & Naveen.

Thanks to Haren Myneni.

* tag 'powerpc-6.7-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  MAINTAINERS: powerpc: Add Aneesh & Naveen
  powerpc/pseries/vas: Migration suspend waits for no in-progress open windows

Pull clk fixes from Stephen Boyd:
 "A handful of clk fixes, mostly in the rockchip clk driver:

   - Fix a clk name, clk parent, and a register for a clk gate in the
     Rockchip rk3128 clk driver

   - Add a PLL frequency on Rockchip rk3568 to fix some display
     artifacts

   - Fix a kbuild dependency for Qualcomm's SM_CAMCC_8550 symbol so that
     it isn't possible to select the associated GCC driver"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: rockchip: rk3128: Fix SCLK_SDMMC's clock name
  clk: rockchip: rk3128: Fix aclk_peri_src's parent
  clk: qcom: Fix SM_CAMCC_8550 dependencies
  clk: rockchip: rk3128: Fix HCLK_OTG gate register
  clk: rockchip: rk3568: Add PLL rate for 292.5MHz

Pull tracing fixes from Steven Rostedt:

 - Fix eventfs to check creating new files for events with names greater
   than NAME_MAX. The eventfs lookup needs to check the return result of
   simple_lookup().

 - Fix the ring buffer to check the proper max data size. Events must be
   able to fit on the ring buffer sub-buffer, if it cannot, then it
   fails to be written and the logic to add the event is avoided. The
   code to check if an event can fit failed to add the possible absolute
   timestamp which may make the event not be able to fit. This causes
   the ring buffer to go into an infinite loop trying to find a
   sub-buffer that would fit the event. Luckily, there's a check that
   will bail out if it looped over a 1000 times and it also warns.

   The real fix is not to add the absolute timestamp to an event that is
   starting at the beginning of a sub-buffer because it uses the
   sub-buffer timestamp.

   By avoiding the timestamp at the start of the sub-buffer allows
   events that pass the first check to always find a sub-buffer that it
   can fit on.

 - Have large events that do not fit on a trace_seq to print "LINE TOO
   BIG" like it does for the trace_pipe instead of what it does now
   which is to silently drop the output.

 - Fix a memory leak of forgetting to free the spare page that is saved
   by a trace instance.

 - Update the size of the snapshot buffer when the main buffer is
   updated if the snapshot buffer is allocated.

 - Fix ring buffer timestamp logic by removing all the places that tried
   to put the before_stamp back to the write stamp so that the next
   event doesn't add an absolute timestamp. But each of these updates
   added a race where by making the two timestamp equal, it was
   validating the write_stamp so that it can be incorrectly used for
   calculating the delta of an event.

 - There's a temp buffer used for printing the event that was using the
   event data size for allocation when it needed to use the size of the
   entire event (meta-data and payload data)

 - For hardening, use "%.*s" for printing the trace_marker output, to
   limit the amount that is printed by the size of the event. This was
   discovered by development that added a bug that truncated the '\0'
   and caused a crash.

 - Fix a use-after-free bug in the use of the histogram files when an
   instance is being removed.

 - Remove a useless update in the rb_try_to_discard of the write_stamp.
   The before_stamp was already changed to force the next event to add
   an absolute timestamp that the write_stamp is not used. But the
   write_stamp is modified again using an unneeded 64-bit cmpxchg.

 - Fix several races in the 32-bit implementation of the
   rb_time_cmpxchg() that does a 64-bit cmpxchg.

 - While looking at fixing the 64-bit cmpxchg, I noticed that because
   the ring buffer uses normal cmpxchg, and this can be done in NMI
   context, there's some architectures that do not have a working
   cmpxchg in NMI context. For these architectures, fail recording
   events that happen in NMI context.

* tag 'trace-v6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  ring-buffer: Do not record in NMI if the arch does not support cmpxchg in NMI
  ring-buffer: Have rb_time_cmpxchg() set the msb counter too
  ring-buffer: Fix 32-bit rb_time_read() race with rb_time_cmpxchg()
  ring-buffer: Fix a race in rb_time_cmpxchg() for 32 bit archs
  ring-buffer: Remove useless update to write_stamp in rb_try_to_discard()
  ring-buffer: Do not try to put back write_stamp
  tracing: Fix uaf issue when open the hist or hist_debug file
  tracing: Add size check when printing trace_marker output
  ring-buffer: Have saved event hold the entire event
  ring-buffer: Do not update before stamp when switching sub-buffers
  tracing: Update snapshot buffer on resize if it is allocated
  ring-buffer: Fix memory leak of free page
  eventfs: Fix events beyond NAME_MAX blocking tasks
  tracing: Have large events show up as '[LINE TOO BIG]' instead of nothing
  ring-buffer: Fix writing to the buffer with max_data_size

Pull arm64 fixes from Catalin Marinas:

 - Arm CMN perf: fix the DTC allocation failure path which can end up
   erroneously clearing live counters

 - arm64/mm: fix hugetlb handling of the dirty page state leading to a
   continuous fault loop in user on hardware without dirty bit
   management (DBM). That's caused by the dirty+writeable information
   not being properly preserved across a series of mprotect(PROT_NONE),
   mprotect(PROT_READ|PROT_WRITE)

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: mm: Always make sw-dirty PTEs hw-dirty in pte_modify
  perf/arm-cmn: Fail DTC counter allocation correctly

Pull pci fixes from Bjorn Helgaas:

 - Limit Max_Read_Request_Size (MRRS) on some MIPS Loongson systems
   because they don't all support MRRS > 256, and firmware doesn't
   always initialize it correctly, which meant some PCIe devices didn't
   work (Jiaxun Yang)

 - Add and use pci_enable_link_state_locked() to prevent potential
   deadlocks in vmd and qcom drivers (Johan Hovold)

 - Revert recent (v6.5) acpiphp resource assignment changes that fixed
   issues with hot-adding devices on a root bus or with large BARs, but
   introduced new issues with GPU initialization and hot-adding SCSI
   disks in QEMU VMs and (Bjorn Helgaas)

* tag 'pci-v6.7-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
  Revert "PCI: acpiphp: Reassign resources on bridge if necessary"
  PCI/ASPM: Add pci_disable_link_state_locked() lockdep assert
  PCI/ASPM: Clean up __pci_disable_link_state() 'sem' parameter
  PCI: qcom: Clean up ASPM comment
  PCI: qcom: Fix potential deadlock when enabling ASPM
  PCI: vmd: Fix potential deadlock when enabling ASPM
  PCI/ASPM: Add pci_enable_link_state_locked()
  PCI: loongson: Limit MRRS to 256