- 11 May, 2022 9 commits
-
-
Jakub Kicinski authored
Yuiko Oshino says: ==================== net: phy: add comments for LAN8742 phy support Add comments for 0xfffffff2 phy ID mask for the LAN8742 and the LAN88xx, explaining that they can coexist and allow future hardware revisions. Also add one missing tab in smsc.c. ==================== Link: https://lore.kernel.org/r/20220509185804.7147-1-yuiko.oshino@microchip.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Yuiko Oshino authored
add comments for the LAN8742 phy ID mask in the previous patch. add one missing tab in the LAN8742 phy ID line. Signed-off-by:
Yuiko Oshino <yuiko.oshino@microchip.com> Signed-off-by:
-
Yuiko Oshino authored
add comments for the updated LAN88xx phy ID mask in the previous patch. Signed-off-by:
-
Chris Packham authored
Convert the marvell,orion-mdio binding to JSON schema. Signed-off-by:
Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220505210621.3637268-1-chris.packham@alliedtelesis.co.nzSigned-off-by:
-
Jakub Kicinski authored
Jakub Kicinski says: ==================== docs: document some aspects of struct sk_buff This small set creates a place to render sk_buff documentation, documents one random thing (data-only skbs) and converts the big checksum comment to kdoc. ==================== Link: https://lore.kernel.org/r/20220323233715.2104106-1-kuba@kernel.org/ Link: https://lore.kernel.org/r/20220324231312.2241166-1-kuba@kernel.org/ Link: https://lore.kernel.org/r/20220509160456.1058940-1-kuba@kernel.orgSigned-off-by:
-
Jakub Kicinski authored
Long time ago Tom added a giant comment to skbuff.h explaining checksums. Now that we have a place in Documentation for skbuff docs we should render it. Sprinkle some markup while at it. Reviewed-by:
David Ahern <dsahern@kernel.org> Signed-off-by:
-
Jakub Kicinski authored
The comment about shinfo->dataref split is really unhelpful, at least to me. Rewrite it and render it to skb documentation. Reviewed-by:
-
Jakub Kicinski authored
Add basic skb documentation. It's mostly an intro to the subsequent patches - it would looks strange if we documented advanced topics without covering the basics in any way. Reviewed-by:
-
Jakub Kicinski authored
Commit c526fd8f ("net: inline dev_queue_xmit()") exported __dev_queue_xmit(), now it's being rendered in html docs, triggering: Documentation/networking/kapi:92: net/core/dev.c:4101: WARNING: Missing matching underline for section title overline. Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Link: https://lore.kernel.org/linux-next/20220503073420.6d3f135d@canb.auug.org.au/ Fixes: c526fd8f ("net: inline dev_queue_xmit()") Link: https://lore.kernel.org/r/20220509170412.1069190-1-kuba@kernel.orgSigned-off-by:
-
- 10 May, 2022 30 commits
-
-
Jakub Kicinski authored
Martin Habets says: ==================== Move Siena into a separate subdirectory The Siena NICs (SFN5000 and SFN6000 series) went EOL in November 2021. Most of these adapters have been remove from our test labs, and testing has been reduced to a minimum. This patch series creates a separate kernel module for the Siena architecture, analogous to what was done for Falcon some years ago. This reduces our maintenance for the sfc.ko module, and allows us to enhance the EF10 and EF100 drivers without the risk of breaking Siena NICs. After this series further enhancements are needed to differentiate the new kernel module from sfc.ko, and the Siena code can be removed from sfc.ko. Thes will be posted as a small follow-up series. The Siena module is not built by default, but can be enabled using Kconfig option SFC_SIENA. This will create module sfc-siena.ko. Patches Patches 1-3 establish the code base for the Siena driver. Patches 4-10 ensure the allyesconfig build succeeds. Patch 11 adds the basic Siena module. I do not expect patch 1 through 3 to be reviewed, they are FYI only. No checkpatch issues were resolved as part of these, but they were fixed in the subsequent patches. Testing Various build tests were done such as allyesconfig, W=1 and sparse. The new sfc-siena.ko and sfc.ko modules were tested on a machine with both these NICs in them, and several tests were run on both drivers. ==================== Link: https://lore.kernel.org/r/165211018297.5289.9658523545298485394.stgit@palantir17.mph.netSigned-off-by:
-
Martin Habets authored
Make the (un)load message more specific to differentiate it from the sfc.ko messages. Signed-off-by:
Martin Habets <habetsm.xilinx@gmail.com> Signed-off-by:
-
Martin Habets authored
The implementation of each is quite short. This means sriov.c is not needed any more. Signed-off-by:
-
Martin Habets authored
For siena use efx_siena_ as the function prefix. efx_nic_update_stats_atomic is only used in efx_common.c, so move it there. efx_nic_copy_stats is not used in Siena, so it is removed. Signed-off-by:
-
Martin Habets authored
For siena use efx_siena_ as the function prefix. Several functions are not used in Siena, so they are removed. Signed-off-by:
-
Martin Habets authored
For siena use efx_siena_ as the function prefix. This patch covers selftest.h, ptp.h, net_driver.h and ethtool_common.h. efx_ethtool_fill_self_tests() can become static. Some functions in ptp.c can also become static. Rename loopback_mode in net_driver.h. Signed-off-by:
-
Martin Habets authored
For siena use efx_siena_ as the function prefix. Several functions are not used in Siena, so they are removed. Use a Siena specific variable name for module parameter efx_separate_tx_channels. Move efx_fini_tx_queue() to avoid a forward declaration of efx_dequeue_buffer(). Signed-off-by:
-
Martin Habets authored
When building with allyesconfig there are many identical symbol names. For siena use efx_siena_ as the function and variable prefix to avoid build errors. efx_mtd_remove_partition can become static as it is no longer called from other files. efx_ticks_to_usecs and efx_xmit_done_single are not used in Siena, so they are removed. Several functions are only used inside efx_channels.c for Siena so they can become static. Signed-off-by:
-
Martin Habets authored
Functionality not supported or needed on Siena includes: - Anything for EF100 - EF10 specifics such as register access, PIO and TSO offload. Also only bind to Siena NICs. Remove EF10 specifics from nic.h. The functions that start with efx_farch_ will be removed from sfc.ko with a subsequent patch. Add the efx_ prefix to siena_prepare_flush() to make it consistent with the other APIs. Signed-off-by:
-
Martin Habets authored
These are the files starting with m through w. No changes are done, those will be done with subsequent commits. Signed-off-by:
-
Martin Habets authored
These are the files starting with b through i. No changes are done, those will be done with subsequent commits. Signed-off-by:
-
Martin Habets authored
Files are only moved, no changes are made. Signed-off-by:
-
Louis Peens authored
Kernel test robot reported an issue after a recent patch about an unused variable when CONFIG_IPV6 is disabled. Move the variable declaration to be inside the #ifdef, and do a bit more cleanup. There is no need to use a temporary ipv6 bool value, it is just checked once, remove the extra variable and just do the check directly. Fixes: 9d5447ed ("nfp: flower: fixup ipv6/ipv4 route lookup for neigh events") Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Louis Peens <louis.peens@corigine.com> Signed-off-by:
Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20220510074845.41457-1-simon.horman@corigine.comSigned-off-by:
-
Colin Ian King authored
Pointer dev is being assigned a value that is never used, the assignment and the variable are redundant and can be removed. Also replace null check with the preferred !ptr idiom. Cleans up clang scan warning: net/x25/x25_proc.c:94:26: warning: Although the value stored to 'dev' is used in the enclosing expression, the value is never actually read from 'dev' [deadcode.DeadStores] Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20220508214500.60446-1-colin.i.king@gmail.comSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Paolo Abeni authored
Wells Lu says: ==================== This is a patch series for Ethernet driver of Sunplus SP7021 SoC. Sunplus SP7021 is an ARM Cortex A7 (4 cores) based SoC. It integrates many peripherals (ex: UART, I2C, SPI, SDIO, eMMC, USB, SD card and etc.) into a single chip. It is designed for industrial control applications. Refer to: https://sunplus.atlassian.net/wiki/spaces/doc/overview https://tibbo.com/store/plus1.html ==================== Link: https://lore.kernel.org/r/1652004800-3212-1-git-send-email-wellslutw@gmail.comSigned-off-by:
-
Wells Lu authored
Add driver for Sunplus SP7021 SoC. Reviewed-by:
Wells Lu <wellslutw@gmail.com> Signed-off-by:
-
Wells Lu authored
Add bindings documentation for Sunplus SP7021 SoC. Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Paolo Abeni authored
Gerhard Engleder says: ==================== ptp: Support hardware clocks with additional free running cycle counter ptp vclocks require a clock with free running time for the timecounter. Currently only a physical clock forced to free running is supported. If vclocks are used, then the physical clock cannot be synchronized anymore. The synchronized time is not available in hardware in this case. As a result, timed transmission with TAPRIO hardware support is not possible anymore. If hardware would support a free running time additionally to the physical clock, then the physical clock does not need to be forced to free running. Thus, the physical clocks can still be synchronized while vclocks are in use. The physical clock could be used to synchronize the time domain of the TSN network and trigger TAPRIO. In parallel vclocks can be used to synchronize other time domains. One year ago I thought for two time domains within a TSN network also two physical clocks are required. This would lead to new kernel interfaces for asking for the second clock, ... . But actually for a time triggered system like TSN there can be only one time domain that controls the system itself. All other time domains belong to other layers, but not to the time triggered system itself. So other time domains can be based on a free running counter if similar mechanisms like 2 step synchroisation are used. Synchronisation was tested with two time domains between two directly connected hosts. Each host run two ptp4l instances, the first used the physical clock and the second used the virtual clock. I used my FPGA based network controller as network device. ptp4l was used in combination with the virtual clock support patches from Miroslav Lichvar. v4: - if_index of 0 is invalid (Jonathan Lemon) - set if_index to 0 in the SOF_TIMESTAMPING_RAW_HARDWARE block (Jonathan Lemon) - add helper function for netdev_get_tstamp() call (Jonathan Lemon) - update SKBTX_ANY_TSTAMP (Paolo Abeni) - use separate bits for new tx_flags (Richard Cochran) v3: - optimize ptp_convert_timestamp (Richard Cochran) - call dev_get_by_napi_id() only if needed (Richard Cochran) - use non-negated logical test (Richard Cochran) - add comment for skipped output (Richard Cochran) - add comment for SKBTX_HW_TSTAMP_USE_CYCLES masking (Richard Cochran) v2: - rename ptp_clock cycles to has_cycles (Richard Cochran) - call it free running cycle counter (Richard Cochran) - update struct skb_shared_hwtstamps kdoc (Richard Cochran) - optimize timestamp address/cookie processing path (Richard Cochran, Vinicius Costa Gomes) v1: - complete rework based on suggestions (Richard Cochran) ==================== Link: https://lore.kernel.org/r/20220506200142.3329-1-gerhard@engleder-embedded.comSigned-off-by:
-
Gerhard Engleder authored
The TSN endpoint Ethernet MAC supports a free running counter additionally to its clock. This free running counter can be read and hardware timestamps are supported. As the name implies, this counter cannot be set and its frequency cannot be adjusted. Add free running cycle counter support based on this free running counter to physical clock. This also requires hardware time stamps based on that free running counter. Signed-off-by:
Gerhard Engleder <gerhard@engleder-embedded.com> Acked-by:
Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by:
-
Gerhard Engleder authored
ptp_convert_timestamp() is called in the RX path of network messages. The current implementation takes ~5000ns on 1.2GHz A53. This is too much for the hot path of packet processing. Introduce hash table for fast vclock lookup in ptp_convert_timestamp(). The execution time of ptp_convert_timestamp() is reduced to ~700ns on 1.2GHz A53. Signed-off-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
Gerhard Engleder authored
If a physical clock supports a free running cycle counter, then timestamps shall be based on this time too. For TX it is known in advance before the transmission if a timestamp based on the free running cycle counter is needed. For RX it is impossible to know which timestamp is needed before the packet is received and assigned to a socket. Support late timestamp determination by a network device. Therefore, an address/cookie is stored within the new netdev_data field of struct skb_shared_hwtstamps. This address/cookie is provided to a new network device function called ndo_get_tstamp(), which returns a timestamp based on the normal/adjustable time or based on the free running cycle counter. If function is not supported, then timestamp handling is not changed. This mechanism is intended for RX, but TX use is also possible. Signed-off-by:
-
Gerhard Engleder authored
ptp_convert_timestamp() converts only the timestamp hwtstamp, which is a field of the argument with the type struct skb_shared_hwtstamps *. So a pointer to the hwtstamp field of this structure is sufficient. Rework ptp_convert_timestamp() to use an argument of type ktime_t *. This allows to add additional timestamp manipulation stages before the call of ptp_convert_timestamp(). Signed-off-by:
-
Gerhard Engleder authored
The free running cycle counter of physical clocks called cycles shall be used for hardware timestamps to enable synchronisation. Introduce new flag SKBTX_HW_TSTAMP_USE_CYCLES, which signals driver to provide a TX timestamp based on cycles if cycles are supported. Signed-off-by:
-
Gerhard Engleder authored
ptp vclocks require a free running time for their timecounter. Currently only a physical clock forced to free running is supported. If vclocks are used, then the physical clock cannot be synchronized anymore. The synchronized time is not available in hardware in this case. As a result, timed transmission with TAPRIO hardware support is not possible anymore. If hardware would support a free running time additionally to the physical clock, then the physical clock does not need to be forced to free running. Thus, the physical clocks can still be synchronized while vclocks are in use. The physical clock could be used to synchronize the time domain of the TSN network and trigger TAPRIO. In parallel vclocks can be used to synchronize other time domains. Introduce support for a free running cycle counter called cycles to physical clocks. Rework ptp vclocks to use this free running cycle counter. Default implementation is based on time of physical clock. Thus, behavior of ptp vclocks based on physical clocks without free running cycle counter is identical to previous behavior. Signed-off-by:
-
Jakub Kicinski authored
Since commit 4e30e98c ("dpaa2-mac: return -EPROBE_DEFER from dpaa2_mac_open in case the fwnode is not set") @parent can't be NULL after the if. It's either the address of the ->fwnode of @dpmacs or @fwnode in case of ACPI. Signed-off-by:
-
Jakub Kicinski authored
Simon Horman says: ==================== nfp: support Corigine PCIE vendor ID Historically the nfp driver has supported NFP chips with Netronome's PCIE vendor ID. This patch extends the driver to also support NFP chips, which at this point are assumed to be otherwise identical from a software perspective, that have Corigine's PCIE vendor ID (0x1da8). This patchset begins by cleaning up strings to make them: * Vendor neutral for the NFP chip * Relate to Corigine for the driver itself It then adds support to the driver for the Corigine's PCIE vendor ID ==================== Link: https://lore.kernel.org/r/20220508173816.476357-1-simon.horman@corigine.comSigned-off-by:
-
Yu Xiao authored
Historically the nfp driver has supported NFP chips with Netronome's PCIE vendor ID. This patch extends the driver to also support NFP chips, which at this point are assumed to be otherwise identical from a software perspective, that have Corigine's PCIE vendor ID (0x1da8). Also, Rename the macro definitions PCI_DEVICE_ID_NERTONEOME_NFPXXXX to PCI_DEVICE_ID_NFPXXXX, as they are now used in conjunction with two PCIE vendor IDs. Signed-off-by:
Yu Xiao <yu.xiao@corigine.com> Signed-off-by:
Yinjun Zhang <yinjun.zhang@corigine.com> Signed-off-by:
-
Yu Xiao authored
Historically the nfp driver has supported NFP chips with Netronome's PCIE vendor ID. In preparation for extending the to also support NFP chips that have Corigine's PCIE vendor ID (0x1da8) make printk statements relating to the chip vendor neutral. An alternate approach is to set the string based on the PCI vendor ID. In our judgement this proved to cumbersome so we have taken this simpler approach. Update strings relating to the driver to use Corigine, who have taken over maintenance of the driver. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queueJakub Kicinski authored
Tony Nguyen says: ==================== 100GbE Intel Wired LAN Driver Updates 2022-05-06 Marcin Szycik says: This patchset adds support for systemd defined naming scheme for port representors, as well as re-enables displaying PCI bus-info in ethtool. bus-info information has previously been removed from ethtool for port representors, as a workaround for a bug in lshw tool, where the tool would sometimes display wrong descriptions for port representors/PF. Now the bug has been fixed in lshw tool [1]. Removing the workaround can be considered a regression (user might be running an older, unpatched version of lshw) (see [2] for discussion). However, calling SET_NETDEV_DEV also produces the same effect as removing the workaround, i.e. lshw is able to access PCI bus-info (this time not via ethtool, but in some other way) and the bug can occur. Adding SET_NETDEV_DEV is important, as it greatly improves netdev naming - - port representors are named based on PF name. Currently port representors are named "ethX", which might be confusing, especially when spawning VFs on multiple PFs. Furthermore, it's currently harder to determine to which PF does a particular port representor belong, as bus-info is not shown in ethtool. Consider the following three cases: Case 1: current code - driver workaround in place, no SET_NETDEV_DEV, lshw with or without fix. Port representors are not displayed because they don't have bus-info (the workaround), PFs are labelled correctly: $ sudo ./lshw -c net -businfo Bus info Device Class Description ======================================================== pci@0000:02:00.0 ens6f0 network Ethernet Controller E810-XXV for SFP <-- PF pci@0000:02:00.1 ens6f1 network Ethernet Controller E810-XXV for SFP pci@0000:02:01.0 ens6f0v0 network Ethernet Adaptive Virtual Function <-- VF pci@0000:02:01.1 ens6f0v1 network Ethernet Adaptive Virtual Function ... Case 2: driver workaround in place, SET_NETDEV_DEV, no lshw fix. Port representors have predictable names. lshw is able to get bus-info because of SET_NETDEV_DEV and netdevs CAN be mislabelled: $ sudo ./lshw -c net -businfo Bus info Device Class Description ============================================================= pci@0000:02:00.0 ens6f0npf0vf60 network Ethernet Controller E810-XXV for SFP <-- mislabeled port representor pci@0000:02:00.1 ens6f1 network Ethernet Controller E810-XXV for SFP pci@0000:02:01.0 ens6f0v0 network Ethernet Adaptive Virtual Function pci@0000:02:01.1 ens6f0v1 network Ethernet Adaptive Virtual Function ... pci@0000:02:00.0 ens6f0npf0vf26 network Ethernet interface pci@0000:02:00.0 ens6f0 network Ethernet interface <-- mislabeled PF pci@0000:02:00.0 ens6f0npf0vf81 network Ethernet interface ... $ sudo ethtool -i ens6f0npf0vf60 driver: ice ... bus-info: ... Output of lshw would be the same with workaround removed; it does not change the fact that lshw labels netdevs incorrectly, while at the same time it prevents ethtool from displaying potentially useful data (bus-info). Case 3: workaround removed, SET_NETDEV_DEV, lshw fix: $ sudo ./lshw -c net -businfo Bus info Device Class Description ============================================================= pci@0000:02:00.0 ens6f0npf0vf73 network Ethernet Controller E810-XXV for SFP pci@0000:02:00.1 ens6f1 network Ethernet Controller E810-XXV for SFP pci@0000:02:01.0 ens6f0v0 network Ethernet Adaptive Virtual Function pci@0000:02:01.1 ens6f0v1 network Ethernet Adaptive Virtual Function ... pci@0000:02:00.0 ens6f0npf0vf5 network Ethernet Controller E810-XXV for SFP pci@0000:02:00.0 ens6f0 network Ethernet Controller E810-XXV for SFP pci@0000:02:00.0 ens6f0npf0vf60 network Ethernet Controller E810-XXV for SFP ... $ sudo ethtool -i ens6f0npf0vf73 driver: ice ... bus-info: 0000:02:00.0 ... In this case poort representors have predictable names, netdevs are not mislabelled in lshw, and bus-info is shown in ethtool. [1] https://ezix.org/src/pkg/lshw/commit/9bf4e4c9c1 [2] https://patchwork.ozlabs.org/project/intel-wired-lan/patch/20220321144731.3935-1-marcin.szycik@linux.intel.com * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: Revert "ice: Hide bus-info in ethtool for PRs in switchdev mode" ice: link representors to PCI device ==================== Link: https://lore.kernel.org/r/20220506180052.5256-1-anthony.l.nguyen@intel.comSigned-off-by:
-
Jiapeng Chong authored
Eliminate the follow smatch warning: net/rose/rose_route.c:1136 rose_node_show() warn: inconsistent indenting. Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Link: https://lore.kernel.org/r/20220507034207.18651-1-jiapeng.chong@linux.alibaba.comSigned-off-by:
-
- 09 May, 2022 1 commit
-
-
David S. Miller authored
Guangbin Huang says: ==================== net: hns3: updates for -next This series includes some updates for the HNS3 ethernet driver. Change logs: V1 -> V2: - Fix some sparse warnings of patch 3# and 4#. - Add patch #6 to fix sparse warnings of incorrect type of argument. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
