Add hwmod data for IVA2 module on OMAP3.

Naming of "iva" instead of "iva2" to be aligned with OMAP4 naming done
by Benoit Cousson.

Cc: Benoit Cousson <b-cousson@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>

Replace all the struct that contain l3 with l3_main in order
to be consistent with the OMAP4 naming convention.
Signed-off-by: Benoit Cousson <b-cousson@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>

Add a new hwmod class for IVA devices.  To be used when hwmods
are created for IVA2 on OMAP3.
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Cc: Benoît Cousson <b-cousson@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>

Create simple omap_devices for the main processors and busses.

This is required to support the forth-coming device-based OPP
approach, where OPPs are managed and tracked at the device level.

Also, move these common PM init functions into a common_pm_init call
that is called as a device_initcall().  The PM init is done at this level
to ensure that the driver core is initialized before initialized.
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
[paul@pwsan.com: sparse warnings cleaned up; newly-created functions moved
 from mach-omap2/io.c to mach-omap2/pm.c; newly-created functions renamed
 to start with "omap2" rather than "omap"]
Signed-off-by: Paul Walmsley <paul@pwsan.com>

The omap_hwmod struct has a field to track the omap_device that is
attached to it, but it was not being assigned.  Fix by assigning omap_device
pointer when omap_device is built.
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
[paul@pwsan.com: use an array index rather than pointer arithmetic]
Signed-off-by: Paul Walmsley <paul@pwsan.com>

Enable omap_device layer support for OMAP4, so that drivers can
use them to enable/idle/shutdown devices.
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Benoit Cousson <b-cousson@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>

On kernels that don't use the omap_device_enable() calls to enable
devices, leave all on-chip devices enabled in hwmod _setup().
Otherwise, accesses to those devices are likely to fail, crashing the
system.  It's expected that kernels built without CONFIG_PM_RUNTIME
will be the primary use-case for this.  This functionality is
controlled by adding an extra parameter to omap_hwmod_late_init().

This patch is based on the patch "OMAP: hwmod: don't auto-disable
hwmod when !CONFIG_PM_RUNTIME" by Kevin Hilman
<khilman@deeprootsystems.com>.

Cc: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>

Some hwmods may need to be idled/enabled in atomic context, so
non-locking versions of these functions are required.

Most users should not need these and usage of theses should be
controlled to understand why access is being done in atomic context.
For this reason, the non-locking functions are only exposed at the
hwmod level and not at the omap-device level.

The use-case that led to the need for the non-locking versions is
hwmods that are enabled/idled from within the core idle/suspend path.
Since interrupts are already disabled here, the mutex-based locking in
hwmod can sleep and will cause potential deadlocks.
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>

In the lastest OMAP4 hwmod data file, the _hwmod was removed
in order to save some memory space and because it does not
bring a lot.
Align OMAP2420, 2430 and 3430 data files with the same convention.
Signed-off-by: Benoit Cousson <b-cousson@ti.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Acked-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>

Since these hwmods do not have IDLEST, set the HWMOD_NO_IDLEST flag,
otherwise _enable() will fail due to failing _wait_target_ready().
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>

On OMAP24xx, the polarity for the IDLEST bits is opposite of OMAP3.
The mask used to check this was using the bit position instead of the
bit mask.

This patch fixes the problem by using the bit mask instead of the bit
field.
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>

Convert most of the magic numbers in mach-omap1/clock_data.c to use
macros.  Clean up a few comments to conform with Documentation/CodingStyle.
Mark the current clkops_uart as being OMAP16xx-only, and add some comments
to indicate that it does not belong there, for future cleanup.

This patch should not cause any functional changes.
Signed-off-by: Paul Walmsley <paul@pwsan.com>

Add KConfig entry for one of the OMAP1 DVFS rates that was missing it.
Based on the surrounding rate KConfigs and the oscillator frequency,
this patch marks it as valid for all OMAP1 platforms -- Richard,
Tuukka, Tony, perhaps you can comment if this does not look right?

In the long term, all of these CONFIG_OMAP_ARM_*MHZ should be removed.
The OPP settings should be associated with the platform information in
the structure data (perhaps by extending the omap_chip defines).  The
selection of which rates to use should be handled at runtime; rates
that are impossible due to xtal frequency mismatch or SoC-type
mismatch should not be included.  If implemented correctly, this
should save some CPU time and some memory on OMAP1 kernels.
Reported-by: Christoph Egger <siccegge@cs.fau.de>
Reported-by: The VAMOS Research Project <vamos@i4.informatik.uni-erlangen.de>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Richard Woodruff <r-woodruff2@ti.com>
Cc: Tuukka Tikkanen <tuukka.tikkanen@nokia.com>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>

Add kerneldoc for struct clk, struct clksel_rate, struct clksel.  Move
flag macros for struct clk.flags and struct clksel_rate.flags closer
to the structures.
Signed-off-by: Paul Walmsley <paul@pwsan.com>

We need to wait on the IDLEST bit after the clocks are enabled
before attempting to access any register.

Currently, the USBTLL i-clock ops uses the clkops_omap2_dflt_wait,
while the USBTLL f-clock ops uses clkops_omap2_dflt. If the
i-clock is enabled first, the clkops_omap2_dflt_wait is
short-circuited as the companion f-clock is not enabled.
This can cause a data abort if the IDLEST has not transitioned,
and we try to access a USBTLL register.

Since the USBTLL i-clock and f-clock could be enabled in any order,
this is a bug. Fix it by changing the clkops for the f-clock.
Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Acked-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: synaptics - relax capability ID checks on newer hardware
  Input: twl40300-keypad - fix handling of "all ground" rows
  Input: gamecon - reference correct pad in gc_psx_command()
  Input: gamecon - reference correct input device in NES mode
  Input: w90p910_keypad - change platfrom driver name to 'nuc900-kpi'
  Input: i8042 - add Gigabyte Spring Peak to dmi_noloop_table
  Input: qt2160 - rename kconfig symbol name

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/radeon/kms: add quirk to make HP DV5000 laptop resume
  drm/radeon/kms: fix RADEON_INFO_CRTC_FROM_ID info ioctl
  Fix ttm_page_alloc.c build breakage
  drm/radeon/kms: fix legacy LVDS dpms sequence
  drm/radeon/kms: drop taking lock around crtc lookup.

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: talitos - fix bug in sg_copy_end_to_buffer

Merge branch 'x86/auditsyscall' of git://git.kernel.org/pub/scm/linux/kernel/git/frob/linux-2.6-roland

* 'x86/auditsyscall' of git://git.kernel.org/pub/scm/linux/kernel/git/frob/linux-2.6-roland:
  x86: auditsyscall: fix fastpath return value after reschedule

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb:
  sysrq,kdb: Use __handle_sysrq() for kdb's sysrq function
  debug_core,kdb: fix kgdb_connected bit set in the wrong place
  Fix merge regression from external kdb to upstream kdb
  repair gdbstub to match the gdbserial protocol specification
  kdb: break out of kdb_ll() when command is terminated

Fix the security problem in the CIFS filesystem DNS lookup code in which a
malicious redirect could be installed by a random user by simply adding a
result record into one of their keyrings with add_key() and then invoking a
CIFS CFS lookup [CVE-2010-2524].

This is done by creating an internal keyring specifically for the caching of
DNS lookups.  To enforce the use of this keyring, the module init routine
creates a set of override credentials with the keyring installed as the thread
keyring and instructs request_key() to only install lookup result keys in that
keyring.

The override is then applied around the call to request_key().

This has some additional benefits when a kernel service uses this module to
request a key:

 (1) The result keys are owned by root, not the user that caused the lookup.

 (2) The result keys don't pop up in the user's keyrings.

 (3) The result keys don't come out of the quota of the user that caused the
     lookup.

The keyring can be viewed as root by doing cat /proc/keys:

2a0ca6c3 I-----     1 perm 1f030000     0     0 keyring   .dns_resolver: 1/4

It can then be listed with 'keyctl list' by root.

	# keyctl list 0x2a0ca6c3
	1 key in keyring:
	726766307: --alswrv     0     0 dns_resolver: foo.bar.com
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-and-Tested-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Steve French <smfrench@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=29062Reported-by: Andres Cimmarusti <acimmarusti@gmail.com>
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Older firmwares fixed the middle byte of the Synaptics capabilities
query to 0x47, but starting with firmware 7.5 the middle byte
represents submodel ID, sometimes also called "dash number".
Reported-and-tested-by: Miroslav Šulc <fordfrog@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

In the CONFIG_AUDITSYSCALL fast-path for x86 64-bit system calls,
we can pass a bad return value and/or error indication for the
system call to audit_syscall_exit().  This happens when
TIF_NEED_RESCHED was set as the system call returned, so we went
out to schedule() and came back to the exit-audit fast-path.  The
fix is to reload the user return value register from the pt_regs
before using it for audit_syscall_exit().

Both the 32-bit kernel's fast path and the 64-bit kernel's 32-bit
system call fast paths work slightly differently, so that they
always leave the fast path entirely to reschedule and don't return
there, so they don't have the analogous bugs.
Reported-by: Alexander Viro <aviro@redhat.com>
Signed-off-by: Roland McGrath <roland@redhat.com>

The kdb code should not toggle the sysrq state in case an end user
wants to try and resume the normal kernel execution.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Immediately following an exit from the kdb shell the kgdb_connected
variable should be set to zero, unless there are breakpoints planted.
If the kgdb_connected variable is not zeroed out with kdb, it is
impossible to turn off kdb.

This patch is merely a work around for now, the real fix will check
for the breakpoints.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>

In the process of merging kdb to the mainline, the kdb lsmod command
stopped printing the base load address of kernel modules.  This is
needed for using kdb in conjunction with external tools such as gdb.

Simply restore the functionality by adding a kdb_printf for the base
load address of the kernel modules.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>

The gdbserial protocol handler should return an empty packet instead
of an error string when ever it responds to a command it does not
implement.

The problem cases come from a debugger client sending
qTBuffer, qTStatus, qSearch, qSupported.

The incorrect response from the gdbstub leads the debugger clients to
not function correctly.  Recent versions of gdb will not detach correctly as a result of this behavior.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Dongdong Deng <dongdong.deng@windriver.com>

Without this patch the "ll" linked-list traversal command won't
terminate when you hit q/Q.
Signed-off-by: Martin Hicks <mort@sgi.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>

Return the crtc_id, not the counter value.  They are not
necessarily the same.

Cc: Jerome Glisse <glisse@freedesktop.org>
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

The commit 1e8655f8
    drm/ttm: Fix build on architectures without AGP

looks at TTM_HAS_AGP before it has been set in ttm_bo_driver.h

Move the conditional inclusion of <asm/agp.h> *after* we have included
ttm_bo_driver.h
Signed-of-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Add delay after turning off the LVDS encoder.

Fixes:
https://bugzilla.kernel.org/show_bug.cgi?id=16389Tested-by: Jan Kreuzer <kontrollator@gmx.de>
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

We only add/remove crtcs at driver load, you cannot remove when
the GPU is running a CS packet since the fd is open, when
GPU hotplugging on radeons actually is needed all this locking
needs a review and I've started re-working kms core locking to deal
with this better. But for now avoid long delays in CS processing when
hotplug detect is happening in a different thread.

this fixes a regression introduced with hotplug detection.
Signed-off-by: Dave Airlie <airlied@redhat.com>

* 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6:
  pcmcia: fix 'driver ... did not release config properly' warning

* 'shrinker' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/xfsdev:
  mm: add context argument to shrinker callback to remaining shrinkers

* 'fix/asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ASoC: Select wm_hubs automatically for WM8994
  ASoC: Remove duplicate AUX definition from WM8776
  ASoC:: remove a redundant snd_soc_unregister_codec call in wm8988_register
  ASoC: wm8727: add a missing return in wm8727_platform_probe
  ASoC: fsi: fixup wrong value setting order of TDM
  ASoC: fsi: fixup clock inversion operation

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  math-emu: correct test for downshifting fraction in _FP_FROM_INT()
  perf: Add DWARF register lookup for sparc
  MAINTAINERS: Add SBUS driver path to sparc entry.
  drivers/sbus: Remove unnecessary casts of private_data
  sparc: remove homegrown L1_CACHE_ALIGN macro
  sparc64: fix the build error due to smp_kgdb_capture_client()
  sparc64: Fix maybe_change_configuration() PCR setting.
  arch/sparc/kernel: Eliminate what looks like a NULL pointer dereference
  sparc64: Update defconfig.
  sunsu: Fix use after free in su_remove().
  sunserial: Don't call add_preferred_console() when console= is specified.
  sparc32: Kill none_mask, it's bogus.

Pointed out by Lucas who found the new one in a comment in
setup_percpu.c. And then I fixed the others that I grepped
for.
Reported-by: Lucas <canolucas@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Up to 2.6.34 pcmcia_release_irq() reset p_dev->_irq to 0 after releasing
the irq.  The IRQ is now released in pcmcia_disable_device(), however
p_dev->_irq is not reset, triggering a warning in pcmcia_device_remove().
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>