- 09 Jun, 2022 5 commits
-
-
Ronak Doshi authored
For vmxnet3 to work in UPT mode, the BAR sizes have been increased. The PT page has been extended to 2 pages and also includes OOB pages as a part of PT BAR. This patch enhances vmxnet3 to use appropriate BAR offsets based on the capability registered. To use new offsets, VMXNET3_CAP_LARGE_BAR needs to be set by the device. If it is not set then the device will use legacy PT page layout. Signed-off-by:
Ronak Doshi <doshir@vmware.com> Acked-by:
Guolin Yang <gyang@vmware.com> Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Ronak Doshi authored
This patch enhances vmxnet3 to suuport capability registers which allows it to enable features selectively. The DCR register tracks the capabilities vmxnet3 device supports. The PTCR register states the capabilities that the passthrough device supports. With the help of these registers, vmxnet3 can enable only those features which the passthrough device supoprts. This allows smooth trasition to Uniform-Passthrough (UPT) mode if the virtual nic requests it. If PTCR register returns nothing or error it means UPT is not being requested and vnic will continue in emulation mode. Signed-off-by:
-
Ronak Doshi authored
vmxnet3 is currently at version 6 and this patch initiates the preparation to accommodate changes for upto version 7. Introduced utility macros for vmxnet3 version 7 comparison and update Copyright information. Signed-off-by:
-
Juergen Gross authored
Remove some unused macros and functions, make local functions static. Signed-off-by:
Juergen Gross <jgross@suse.com> Acked-by:
Wei Liu <wei.liu@kernel.org> Link: https://lore.kernel.org/r/20220608043726.9380-1-jgross@suse.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queueJakub Kicinski authored
Tony Nguyen says: ==================== 40GbE Intel Wired LAN Driver Updates 2022-06-07 This series contains updates to i40e and iavf drivers. Mateusz adds implementation for setting VF VLAN pruning to allow user to specify visibility of VLAN tagged traffic to VFs for i40e. He also adds waiting for result from PF for setting MAC address in iavf. ==================== Link: https://lore.kernel.org/r/20220607175506.696671-1-anthony.l.nguyen@intel.comSigned-off-by:
-
- 08 Jun, 2022 4 commits
-
-
Peter Lafreniere authored
Despite these inline functions having full visibility to the compiler at compile time, they still strip const from passed pointers. This change allows for functions in various network drivers to be marked as const that could not be marked const before. Signed-off-by:
Peter Lafreniere <pjlafren@mtu.edu> Link: https://lore.kernel.org/r/20220606113458.35953-1-pjlafren@mtu.eduSigned-off-by:
-
Christophe JAILLET authored
When kernel.h is used in the headers it adds a lot into dependency hell, especially when there are circular dependencies are involved. Remove kernel.h when it is not needed. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20220607125103.487801-1-simon.horman@corigine.comSigned-off-by:
-
Lorenzo Bianconi authored
Enable rx checksum offload for mt7986 chipset. Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/c8699805c18f7fd38315fcb8da2787676d83a32c.1654544585.git.lorenzo@kernel.orgSigned-off-by:
-
Christophe JAILLET authored
When kernel.h is used in the headers it adds a lot into dependency hell, especially when there are circular dependencies are involved. Replace kernel.h inclusion with the list of what is really being used. Signed-off-by:
-
- 07 Jun, 2022 8 commits
-
-
Mateusz Palczewski authored
Make iavf_set_mac synchronous by waiting for a response from a PF. Without this iavf_set_mac is always returning success even though set_mac can be rejected by a PF. This ensures that when set_mac exits netdev MAC is updated. This is needed for sending ARPs with correct MAC after changing VF's MAC. This is also needed by bonding module. Signed-off-by:
Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Signed-off-by:
Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by:
Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com>
-
Mateusz Palczewski authored
VFs by default are able to see all tagged traffic regardless of trust and VLAN filters configured. Add new private flag vf-vlan-pruning that allows changing of default VF behavior for tagged traffic. When the flag is turned on untrusted VF will only be able to receive untagged traffic or traffic with VLAN tags it has created interfaces for The flag is off by default and can only be changed if there are no VFs spawned on the PF. This flag will only be effective when no PVID is set on VF and VF is not trusted. Add new function that computes the correct VLAN ID for VF VLAN filters based on trust, PVID, vf-vlan-prune-disable flag and current VLAN ID. Testing Hints: Test 1: vf-vlan-pruning == off ============================== 1. Set the private flag > ethtool --set-priv-flag eth0 vf-vlan-pruning off (default setting) 2. Use scapy to send any VLAN tagged traffic and make sure the VF receives all VLAN tagged traffic that matches its destination MAC filters (unicast, multicast, and broadcast). Test 2: vf-vlan-pruning == on ============================== 1. Set the private flag > ethtool --set-priv-flag eth0 vf-vlan-pruning on 2. Use scapy to send any VLAN tagged traffic and make sure the VF does not receive any VLAN tagged traffic that matches its destination MAC filters (unicast, multicast, and broadcast). 3. Add a VLAN filter on the VF netdev > ip link add link eth0v0 name vlan10 type vlan id 10 4. Bring the VLAN netdev up > ip link set vlan10 up 4. Use scapy to send traffic with VLAN 10, VLAN 11 (anything not VLAN 10), and untagged traffic. Make sure the VF only receives VLAN 10 and untagged traffic when the link partner is sending. Test 3: vf-vlan-pruning == off && VF is in a port VLAN ============================== 1. Set the private flag > ethtool --set-priv-flag eth0 vf-vlan-pruning off (default setting) 2. Create a VF > echo 1 > sriov_numvfs 3. Put the VF in a port VLAN > ip link set eth0 vf 0 vlan 10 4. Use scapy to send traffic with VLAN 10 and VLAN 11 (anything not VLAN 10) and make sure the VF only receives untagged traffic when the link partner is sending VLAN 10 tagged traffic as the VLAN tag is expected to be stripped by HW for port VLANs and not visible to the VF. Test 4: Change vf-vlan-pruning while VFs are created ============================== echo 0 > sriov_numvfs ethtool --set-priv-flag eth0 vf-vlan-pruning off echo 1 > sriov_numvfs ethtool --set-priv-flag eth0 vf-vlan-pruning on (expect failure) Signed-off-by:
Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by:
-
Paolo Abeni authored
Menglong Dong says: ==================== reorganize the code of the enum skb_drop_reason The code of skb_drop_reason is a little wild, let's reorganize them. Three things and three patches: 1) Move the enum 'skb_drop_reason' and related function to the standalone header 'dropreason.h', as Jakub Kicinski suggested, as the skb drop reasons are getting more and more. 2) use auto-generation to generate the source file that convert enum skb_drop_reason to string. 3) make the comment of skb drop reasons kernel-doc style. Changes since v3: 3/3: remove some useless comment (Jakub Kicinski) Changes since v2: 2/3: - add new line in the end of .gitignore - fix awk warning by make '\;' to ';', as ';' is not need to be escaped - export 'drop_reasons' in skbuff.c Changes since v1: 1/3: move dropreason.h from include/linux/ to include/net/ (Jakub Kicinski) 2/3: generate source file instead of header file for drop reasons string array (Jakub Kicinski) 3/3: use inline comment (Jakub Kicinski) ==================== Link: https://lore.kernel.org/r/20220606022436.331005-1-imagedong@tencent.comSigned-off-by: -
Menglong Dong authored
To make the code clear, reformat the comment in dropreason.h to k-doc style. Now, the comment can pass the check of kernel-doc without warnning: $ ./scripts/kernel-doc -v -none include/linux/dropreason.h include/linux/dropreason.h:7: info: Scanning doc for enum skb_drop_reason Signed-off-by:
Menglong Dong <imagedong@tencent.com> Signed-off-by:
-
Menglong Dong authored
It is annoying to add new skb drop reasons to 'enum skb_drop_reason' and TRACE_SKB_DROP_REASON in trace/event/skb.h, and it's easy to forget to add the new reasons we added to TRACE_SKB_DROP_REASON. TRACE_SKB_DROP_REASON is used to convert drop reason of type number to string. For now, the string we passed to user space is exactly the same as the name in 'enum skb_drop_reason' with a 'SKB_DROP_REASON_' prefix. Therefore, we can use 'auto-generation' to generate these drop reasons to string at build time. The new source 'dropreason_str.c' will be auto generated during build time, which contains the string array 'const char * const drop_reasons[]'. Signed-off-by:
-
Menglong Dong authored
As the skb drop reasons are getting more and more, move the enum 'skb_drop_reason' and related function to the standalone header 'dropreason.h', as Jakub Kicinski suggested. Signed-off-by:
-
Christophe JAILLET authored
When kernel.h is used in the headers it adds a lot into dependency hell, especially when there are circular dependencies are involved. Replace kernel.h inclusion with the list of what is really being used. While at it, move these includes below the include guard. Signed-off-by:
-
Xiang wangx authored
Delete the redundant word 'the'. Signed-off-by:
Xiang wangx <wangxiang@cdjrlc.com> Link: https://lore.kernel.org/r/20220604040917.8926-1-wangxiang@cdjrlc.comSigned-off-by:
-
- 02 Jun, 2022 23 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from bpf and netfilter. Current release - new code bugs: - af_packet: make sure to pull the MAC header, avoid skb panic in GSO - ptp_clockmatrix: fix inverted logic in is_single_shot() - netfilter: flowtable: fix missing FLOWI_FLAG_ANYSRC flag - dt-bindings: net: adin: fix adi,phy-output-clock description syntax - wifi: iwlwifi: pcie: rename CAUSE macro, avoid MIPS build warning Previous releases - regressions: - Revert "net: af_key: add check for pfkey_broadcast in function pfkey_process" - tcp: fix tcp_mtup_probe_success vs wrong snd_cwnd - nf_tables: disallow non-stateful expression in sets earlier - nft_limit: clone packet limits' cost value - nf_tables: double hook unregistration in netns path - ping6: fix ping -6 with interface name Previous releases - always broken: - sched: fix memory barriers to prevent skbs from getting stuck in lockless qdiscs - neigh: set lower cap for neigh_managed_work rearming, avoid constantly scheduling the probe work - bpf: fix probe read error on big endian in ___bpf_prog_run() - amt: memory leak and error handling fixes Misc: - ipv6: expand & rename accept_unsolicited_na to accept_untracked_na" * tag 'net-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (80 commits) net/af_packet: make sure to pull mac header net: add debug info to __skb_pull() net: CONFIG_DEBUG_NET depends on CONFIG_NET stmmac: intel: Add RPL-P PCI ID net: stmmac: use dev_err_probe() for reporting mdio bus registration failure tipc: check attribute length for bearer name ice: fix access-beyond-end in the switch code nfp: remove padding in nfp_nfdk_tx_desc ax25: Fix ax25 session cleanup problems net: usb: qmi_wwan: Add support for Cinterion MV31 with new baseline sfc/siena: fix wrong tx channel offset with efx_separate_tx_channels sfc/siena: fix considering that all channels have TX queues socket: Don't use u8 type in uapi socket.h net/sched: act_api: fix error code in tcf_ct_flow_table_fill_tuple_ipv6() net: ping6: Fix ping -6 with interface name macsec: fix UAF bug for real_dev octeontx2-af: fix error code in is_valid_offset() wifi: mac80211: fix use-after-free in chanctx code bonding: guard ns_targets by CONFIG_IPV6 tcp: tcp_rtx_synack() can be called from process context ... -
Saravana Kannan authored
Commit cfc1d277 ("module: Move all into module/") changed the prefix of the module param by moving/renaming files. A later commit also moves the module_param() into a different file, thereby changing the prefix yet again. This would break kernel cmdline compatibility and also userspace compatibility at /sys/module/module/parameters/sig_enforce. So, set the prefix back to "module.". Fixes: cfc1d277 ("module: Move all into module/") Link: https://lore.kernel.org/lkml/20220602034111.4163292-1-saravanak@google.com/ Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Aaron Tomlin <atomlin@redhat.com> Acked-by:
Luis Chamberlain <mcgrof@kernel.org> Signed-off-by:
Saravana Kannan <saravanak@google.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull pci fixes from Bjorn Helgaas: - Revert brcmstb patches that broke booting on Raspberry Pi Compute Module 4 (Bjorn Helgaas) - Fix bridge_d3_blacklist[] error that overwrote the existing Gigabyte X299 entry instead of adding a new one (Bjorn Helgaas) - Update Lorenzo Pieralisi's email address in MAINTAINERS (Lorenzo Pieralisi) * tag 'pci-v5.19-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: MAINTAINERS: Update Lorenzo Pieralisi's email address PCI/PM: Fix bridge_d3_blacklist[] Elo i2 overwrite of Gigabyte X299 Revert "PCI: brcmstb: Split brcm_pcie_setup() into two funcs" Revert "PCI: brcmstb: Add mechanism to turn on subdev regulators" Revert "PCI: brcmstb: Add control of subdevice voltage regulators" Revert "PCI: brcmstb: Do not turn off WOL regulators on suspend"
-
Jakub Kicinski authored
Eric Dumazet says: ==================== net: af_packet: be careful when expanding mac header size A recent regression in af_packet needed a preliminary debug patch, which will presumably be useful for next bugs hunting. The af_packet fix is to make sure MAC headers are contained in skb linear part, as GSO stack requests. v2: CONFIG_DEBUG_NET depends on CONFIG_NET to avoid compile errors found by kernel bots. ==================== Link: https://lore.kernel.org/r/20220602161859.2546399-1-eric.dumazet@gmail.comSigned-off-by:
-
Eric Dumazet authored
GSO assumes skb->head contains link layer headers. tun device in some case can provide base 14 bytes, regardless of VLAN being used or not. After blamed commit, we can end up setting a network header offset of 18+, we better pull the missing bytes to avoid a posible crash in GSO. syzbot report was: kernel BUG at include/linux/skbuff.h:2699! invalid opcode: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 3601 Comm: syz-executor210 Not tainted 5.18.0-syzkaller-11338-g2c5ca23f #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__skb_pull include/linux/skbuff.h:2699 [inline] RIP: 0010:skb_mac_gso_segment+0x48f/0x530 net/core/gro.c:136 Code: 00 48 c7 c7 00 96 d4 8a c6 05 cb d3 45 06 01 e8 26 bb d0 01 e9 2f fd ff ff 49 c7 c4 ea ff ff ff e9 f1 fe ff ff e8 91 84 19 fa <0f> 0b 48 89 df e8 97 44 66 fa e9 7f fd ff ff e8 ad 44 66 fa e9 48 RSP: 0018:ffffc90002e2f4b8 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 0000000000000012 RCX: 0000000000000000 RDX: ffff88805bb58000 RSI: ffffffff8760ed0f RDI: 0000000000000004 RBP: 0000000000005dbc R08: 0000000000000004 R09: 0000000000000fe0 R10: 0000000000000fe4 R11: 0000000000000000 R12: 0000000000000fe0 R13: ffff88807194d780 R14: 1ffff920005c5e9b R15: 0000000000000012 FS: 000055555730f300(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000200015c0 CR3: 0000000071ff8000 CR4: 0000000000350ee0 Call Trace: <TASK> __skb_gso_segment+0x327/0x6e0 net/core/dev.c:3411 skb_gso_segment include/linux/netdevice.h:4749 [inline] validate_xmit_skb+0x6bc/0xf10 net/core/dev.c:3669 validate_xmit_skb_list+0xbc/0x120 net/core/dev.c:3719 sch_direct_xmit+0x3d1/0xbe0 net/sched/sch_generic.c:327 __dev_xmit_skb net/core/dev.c:3815 [inline] __dev_queue_xmit+0x14a1/0x3a00 net/core/dev.c:4219 packet_snd net/packet/af_packet.c:3071 [inline] packet_sendmsg+0x21cb/0x5550 net/packet/af_packet.c:3102 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:734 ____sys_sendmsg+0x6eb/0x810 net/socket.c:2492 ___sys_sendmsg+0xf3/0x170 net/socket.c:2546 __sys_sendmsg net/socket.c:2575 [inline] __do_sys_sendmsg net/socket.c:2584 [inline] __se_sys_sendmsg net/socket.c:2582 [inline] __x64_sys_sendmsg+0x132/0x220 net/socket.c:2582 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7f4b95da06c9 Code: 28 c3 e8 4a 15 00 00 66 2e 0f 1f 84 00 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffd7defc4c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007ffd7defc4f0 RCX: 00007f4b95da06c9 RDX: 0000000000000000 RSI: 0000000020000140 RDI: 0000000000000003 RBP: 0000000000000003 R08: bb1414ac00000050 R09: bb1414ac00000050 R10: 0000000000000004 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ffd7defc4e0 R14: 00007ffd7defc4d8 R15: 00007ffd7defc4d4 </TASK> Fixes: dfed913e ("net/af_packet: add VLAN support for AF_PACKET SOCK_RAW GSO") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Acked-by:
Hangbin Liu <liuhangbin@gmail.com> Acked-by:
Willem de Bruijn <willemb@google.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Eric Dumazet authored
While analyzing yet another syzbot report, I found the following patch very useful. It allows to better understand what went wrong. This debug info is only enabled if CONFIG_DEBUG_NET=y, which is the case for syzbot builds. Signed-off-by:
-
Eric Dumazet authored
It makes little sense to debug networking stacks if networking is not compiled in. Signed-off-by:
-
Michael Sit Wei Hong authored
Add PCI ID for Ethernet TSN Controller on RPL-P. Signed-off-by:
Michael Sit Wei Hong <michael.wei.hong.sit@intel.com> Link: https://lore.kernel.org/r/20220602073507.3955721-1-michael.wei.hong.sit@intel.comSigned-off-by:
-
Rasmus Villemoes authored
I have a board where these two lines are always printed during boot: imx-dwmac 30bf0000.ethernet: Cannot register the MDIO bus imx-dwmac 30bf0000.ethernet: stmmac_dvr_probe: MDIO bus (id: 1) registration failed It's perfectly fine, and the device is successfully (and silently, as far as the console goes) probed later. Use dev_err_probe() instead, which will demote these messages to debug level (thus removing the alarming messages from the console) when the error is -EPROBE_DEFER, and also has the advantage of including the error code if/when it happens to be something other than -EPROBE_DEFER. While here, add the missing \n to one of the format strings. Signed-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Link: https://lore.kernel.org/r/20220602074840.1143360-1-linux@rasmusvillemoes.dkSigned-off-by:
-
Hoang Le authored
syzbot reported uninit-value: ===================================================== BUG: KMSAN: uninit-value in string_nocheck lib/vsprintf.c:644 [inline] BUG: KMSAN: uninit-value in string+0x4f9/0x6f0 lib/vsprintf.c:725 string_nocheck lib/vsprintf.c:644 [inline] string+0x4f9/0x6f0 lib/vsprintf.c:725 vsnprintf+0x2222/0x3650 lib/vsprintf.c:2806 vprintk_store+0x537/0x2150 kernel/printk/printk.c:2158 vprintk_emit+0x28b/0xab0 kernel/printk/printk.c:2256 vprintk_default+0x86/0xa0 kernel/printk/printk.c:2283 vprintk+0x15f/0x180 kernel/printk/printk_safe.c:50 _printk+0x18d/0x1cf kernel/printk/printk.c:2293 tipc_enable_bearer net/tipc/bearer.c:371 [inline] __tipc_nl_bearer_enable+0x2022/0x22a0 net/tipc/bearer.c:1033 tipc_nl_bearer_enable+0x6c/0xb0 net/tipc/bearer.c:1042 genl_family_rcv_msg_doit net/netlink/genetlink.c:731 [inline] - Do sanity check the attribute length for TIPC_NLA_BEARER_NAME. - Do not use 'illegal name' in printing message. Reported-by: syzbot+e820fdc8ce362f2dea51@syzkaller.appspotmail.com Fixes: cb30a633 ("tipc: refactor function tipc_enable_bearer()") Acked-by:
Jon Maloy <jmaloy@redhat.com> Signed-off-by:
Hoang Le <hoang.h.le@dektech.com.au> Link: https://lore.kernel.org/r/20220602063053.5892-1-hoang.h.le@dektech.com.auSigned-off-by:
-
https://github.com/ceph/ceph-clientLinus Torvalds authored
Pull ceph updates from Ilya Dryomov: "A big pile of assorted fixes and improvements for the filesystem with nothing in particular standing out, except perhaps that the fact that the MDS never really maintained atime was made official and thus it's no longer updated on the client either. We also have a MAINTAINERS update: Jeff is transitioning his filesystem maintainership duties to Xiubo" * tag 'ceph-for-5.19-rc1' of https://github.com/ceph/ceph-client: (23 commits) MAINTAINERS: move myself from ceph "Maintainer" to "Reviewer" ceph: fix decoding of client session messages flags ceph: switch TASK_INTERRUPTIBLE to TASK_KILLABLE ceph: remove redundant variable ino ceph: try to queue a writeback if revoking fails ceph: fix statfs for subdir mounts ceph: fix possible deadlock when holding Fwb to get inline_data ceph: redirty the page for writepage on failure ceph: try to choose the auth MDS if possible for getattr ceph: disable updating the atime since cephfs won't maintain it ceph: flush the mdlog for filesystem sync ceph: rename unsafe_request_wait() libceph: use swap() macro instead of taking tmp variable ceph: fix statx AT_STATX_DONT_SYNC vs AT_STATX_FORCE_SYNC check ceph: no need to invalidate the fscache twice ceph: replace usage of found with dedicated list iterator variable ceph: use dedicated list iterator variable ceph: update the dlease for the hashed dentry when removing ceph: stop retrying the request when exceeding 256 times ceph: stop forwarding the request when exceeding 256 times ...
-
Linus Torvalds authored
Merge tag 'livepatching-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching Pull livepatching cleanup from Petr Mladek: - Remove duplicated livepatch code [Christophe] * tag 'livepatching-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching: livepatch: Remove klp_arch_set_pc() and asm/livepatch.h
-
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linuxLinus Torvalds authored
Pull printk fixup from Petr Mladek: - Revert inappropriate use of wake_up_interruptible_all() in printk() * tag 'printk-for-5.19-fixup' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: Revert "printk: wake up all waiters"
-
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblockLinus Torvalds authored
Pull memblock test suite updates from Mike Rapoport: "Comment updates for memblock test suite Update comments in the memblock tests so that they will have consistent style" * tag 'memblock-v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock: memblock tests: remove completed TODO item memblock tests: update style of comments for memblock_free_*() functions memblock tests: update style of comments for memblock_remove_*() functions memblock tests: update style of comments for memblock_reserve_*() functions memblock tests: update style of comments for memblock_add_*() functions
-
Dan Carpenter authored
The "data->block[0]" variable comes from the user and is a number between 0-255. It needs to be capped to prevent writing beyond the end of dma_buffer[]. Fixes: 5e9a97b1 ("i2c: ismt: Adding support for I2C_SMBUS_BLOCK_PROC_CALL") Reported-and-tested-by:
Zheyu Ma <zheyuma97@gmail.com> Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
-
Alexander Lobakin authored
Global `-Warray-bounds` enablement revealed some problems, one of which is the way we define and use AQC rules messages. In fact, they have a shared header, followed by the actual message, which can be of one of several different formats. So it is straightforward enough to define that header as a separate struct and then embed it into message structures as needed, but currently all the formats reside in one union coupled with the header. Then, the code allocates only the memory needed for a particular message format, leaving the union potentially incomplete. There are no actual reads or writes beyond the end of an allocated chunk, but at the same time, the whole implementation is fragile and backed by an equilibrium rather than strong type and memory checks. Define the structures the other way around: one for the common header and the rest for the actual formats with the header embedded. There are no places where several union members would be used at the same time anyway. This allows to use proper struct_size() and let the compiler know what is going to be done. Finally, unsilence `-Warray-bounds` back for ice_switch.c. Other little things worth mentioning: * &ice_sw_rule_vsi_list_query is not used anywhere, remove it. It's weird anyway to talk to hardware with purely kernel types (bitmaps); * expand the ICE_SW_RULE_*_SIZE() macros to pass a structure variable name to struct_size() to let it do strict typechecking; * rename ice_sw_rule_lkup_rx_tx::hdr to ::hdr_data to keep ::hdr for the header structure to have the same name for it constistenly everywhere; * drop the duplicate of %ICE_SW_RULE_RX_TX_NO_HDR_SIZE residing in ice_switch.h. Fixes: 9daf8208 ("ice: Add support for switch filter programming") Fixes: 66486d89 ("ice: replace single-element array used for C struct hack") Signed-off-by:
Alexander Lobakin <alexandr.lobakin@intel.com> Reviewed-by:
Marcin Szycik <marcin.szycik@linux.intel.com> Acked-by:
-
Fei Qin authored
NFDK firmware supports 48-bit dma addressing and parses 16 high bits of dma addresses. In nfp_nfdk_tx_desc, dma related structure and tso related structure are union. When "mss" be filled with nonzero value due to enable tso, the memory used by "padding" may be also filled. Then, firmware may parse wrong dma addresses which causes TX watchdog timeout problem. This patch removes padding and unifies the dma_addr_hi bits with the one in firmware. nfp_nfdk_tx_desc_set_dma_addr is also added to match this change. Fixes: c10d12e3 ("nfp: add support for NFDK data path") Signed-off-by:
Fei Qin <fei.qin@corigine.com> Signed-off-by:
Yinjun Zhang <yinjun.zhang@corigine.com> Signed-off-by:
Louis Peens <louis.peens@corigine.com> Signed-off-by:
-
Duoming Zhou authored
There are session cleanup problems in ax25_release() and ax25_disconnect(). If we setup a session and then disconnect, the disconnected session is still in "LISTENING" state that is shown below. Active AX.25 sockets Dest Source Device State Vr/Vs Send-Q Recv-Q DL9SAU-4 DL9SAU-3 ??? LISTENING 000/000 0 0 DL9SAU-3 DL9SAU-4 ??? LISTENING 000/000 0 0 The first reason is caused by del_timer_sync() in ax25_release(). The timers of ax25 are used for correct session cleanup. If we use ax25_release() to close ax25 sessions and ax25_dev is not null, the del_timer_sync() functions in ax25_release() will execute. As a result, the sessions could not be cleaned up correctly, because the timers have stopped. In order to solve this problem, this patch adds a device_up flag in ax25_dev in order to judge whether the device is up. If there are sessions to be cleaned up, the del_timer_sync() in ax25_release() will not execute. What's more, we add ax25_cb_del() in ax25_kill_by_device(), because the timers have been stopped and there are no functions that could delete ax25_cb if we do not call ax25_release(). Finally, we reorder the position of ax25_list_lock in ax25_cb_del() in order to synchronize among different functions that call ax25_cb_del(). The second reason is caused by improper check in ax25_disconnect(). The incoming ax25 sessions which ax25->sk is null will close heartbeat timer, because the check "if(!ax25->sk || ..)" is satisfied. As a result, the session could not be cleaned up properly. In order to solve this problem, this patch changes the improper check to "if(ax25->sk && ..)" in ax25_disconnect(). What`s more, the ax25_disconnect() may be called twice, which is not necessary. For example, ax25_kill_by_device() calls ax25_disconnect() and sets ax25->state to AX25_STATE_0, but ax25_release() calls ax25_disconnect() again. In order to solve this problem, this patch add a check in ax25_release(). If the flag of ax25->sk equals to SOCK_DEAD, the ax25_disconnect() in ax25_release() should not be executed. Fixes: 82e31755 ("ax25: Fix UAF bugs in ax25 timers") Fixes: 8a367e74 ("ax25: Fix segfault after sock connection timeout") Reported-and-tested-by:
Thomas Osterried <thomas@osterried.de> Signed-off-by:
Duoming Zhou <duoming@zju.edu.cn> Link: https://lore.kernel.org/r/20220530152158.108619-1-duoming@zju.edu.cnSigned-off-by:
-
Stephen Brennan authored
A rare BUG_ON triggered in assoc_array_gc: [3430308.818153] kernel BUG at lib/assoc_array.c:1609! Which corresponded to the statement currently at line 1593 upstream: BUG_ON(assoc_array_ptr_is_meta(p)); Using the data from the core dump, I was able to generate a userspace reproducer[1] and determine the cause of the bug. [1]: https://github.com/brenns10/kernel_stuff/tree/master/assoc_array_gc After running the iterator on the entire branch, an internal tree node looked like the following: NODE (nr_leaves_on_branch: 3) SLOT [0] NODE (2 leaves) SLOT [1] NODE (1 leaf) SLOT [2..f] NODE (empty) In the userspace reproducer, the pr_devel output when compressing this node was: -- compress node 0x5607cc089380 -- free=0, leaves=0 [0] retain node 2/1 [nx 0] [1] fold node 1/1 [nx 0] [2] fold node 0/1 [nx 2] [3] fold node 0/2 [nx 2] [4] fold node 0/3 [nx 2] [5] fold node 0/4 [nx 2] [6] fold node 0/5 [nx 2] [7] fold node 0/6 [nx 2] [8] fold node 0/7 [nx 2] [9] fold node 0/8 [nx 2] [10] fold node 0/9 [nx 2] [11] fold node 0/10 [nx 2] [12] fold node 0/11 [nx 2] [13] fold node 0/12 [nx 2] [14] fold node 0/13 [nx 2] [15] fold node 0/14 [nx 2] after: 3 At slot 0, an internal node with 2 leaves could not be folded into the node, because there was only one available slot (slot 0). Thus, the internal node was retained. At slot 1, the node had one leaf, and was able to be folded in successfully. The remaining nodes had no leaves, and so were removed. By the end of the compression stage, there were 14 free slots, and only 3 leaf nodes. The tree was ascended and then its parent node was compressed. When this node was seen, it could not be folded, due to the internal node it contained. The invariant for compression in this function is: whenever nr_leaves_on_branch < ASSOC_ARRAY_FAN_OUT, the node should contain all leaf nodes. The compression step currently cannot guarantee this, given the corner case shown above. To fix this issue, retry compression whenever we have retained a node, and yet nr_leaves_on_branch < ASSOC_ARRAY_FAN_OUT. This second compression will then allow the node in slot 1 to be folded in, satisfying the invariant. Below is the output of the reproducer once the fix is applied: -- compress node 0x560e9c562380 -- free=0, leaves=0 [0] retain node 2/1 [nx 0] [1] fold node 1/1 [nx 0] [2] fold node 0/1 [nx 2] [3] fold node 0/2 [nx 2] [4] fold node 0/3 [nx 2] [5] fold node 0/4 [nx 2] [6] fold node 0/5 [nx 2] [7] fold node 0/6 [nx 2] [8] fold node 0/7 [nx 2] [9] fold node 0/8 [nx 2] [10] fold node 0/9 [nx 2] [11] fold node 0/10 [nx 2] [12] fold node 0/11 [nx 2] [13] fold node 0/12 [nx 2] [14] fold node 0/13 [nx 2] [15] fold node 0/14 [nx 2] internal nodes remain despite enough space, retrying -- compress node 0x560e9c562380 -- free=14, leaves=1 [0] fold node 2/15 [nx 0] after: 3 Changes ======= DH: - Use false instead of 0. - Reorder the inserted lines in a couple of places to put retained before next_slot. ver #2) - Fix typo in pr_devel, correct comparison to "<=" Fixes: 3cb98950 ("Add a generic associative array implementation.") Cc: <stable@vger.kernel.org> Signed-off-by:Stephen Brennan <stephen.s.brennan@oracle.com> Signed-off-by:
David Howells <dhowells@redhat.com> cc: Andrew Morton <akpm@linux-foundation.org> cc: keyrings@vger.kernel.org Link: https://lore.kernel.org/r/20220511225517.407935-1-stephen.s.brennan@oracle.com/ # v1 Link: https://lore.kernel.org/r/20220512215045.489140-1-stephen.s.brennan@oracle.com/ # v2 Reviewed-by:
Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by:
-
Slark Xiao authored
Adding support for Cinterion device MV31 with Qualcomm new baseline. Use different PIDs to separate it from previous base line products. All interfaces settings keep same as previous. T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 7 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1e2d ProdID=00b9 Rev=04.14 S: Manufacturer=Cinterion S: Product=Cinterion PID 0x00B9 USB Mobile Broadband S: SerialNumber=90418e79 C: #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option I: If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option Signed-off-by:
Slark Xiao <slark_xiao@163.com> Acked-by:
Bjørn Mork <bjorn@mork.no> Link: https://lore.kernel.org/r/20220601040531.6016-1-slark_xiao@163.comSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxJakub Kicinski authored
Saeed Mahameed says: ==================== mlx5 fixes 2022-05-31 This series provides bug fixes to mlx5 driver. Please pull and let me know if there is any problem. * tag 'mlx5-fixes-2022-05-31' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5: Fix mlx5_get_next_dev() peer device matching net/mlx5e: Update netdev features after changing XDP state net/mlx5: correct ECE offset in query qp output net/mlx5e: Disable softirq in mlx5e_activate_rq to avoid race condition net/mlx5: CT: Fix header-rewrite re-use for tupels net/mlx5e: TC NIC mode, fix tc chains miss table net/mlx5: Don't use already freed action pointer ==================== Link: https://lore.kernel.org/r/20220531205447.99236-1-saeed@kernel.orgSigned-off-by:
-
Jakub Kicinski authored
Íñigo Huguet says: ==================== sfc/siena: fix some efx_separate_tx_channels errors Trying to load sfc driver with modparam efx_separate_tx_channels=1 resulted in errors during initialization and not being able to use the NIC. This patches fix a few bugs and make it work again. This has been already done for sfc, do it also for sfc_siena. ==================== Link: https://lore.kernel.org/r/20220601063603.15362-1-ihuguet@redhat.comSigned-off-by:
-
Íñigo Huguet authored
tx_channel_offset is calculated in efx_allocate_msix_channels, but it is also calculated again in efx_set_channels because it was originally done there, and when efx_allocate_msix_channels was introduced it was forgotten to be removed from efx_set_channels. Moreover, the old calculation is wrong when using efx_separate_tx_channels because now we can have XDP channels after the TX channels, so n_channels - n_tx_channels doesn't point to the first TX channel. Remove the old calculation from efx_set_channels, and add the initialization of this variable if MSI or legacy interrupts are used, next to the initialization of the rest of the related variables, where it was missing. This has been already done for sfc, do it also for sfc_siena. Fixes: 3990a8ff ("sfc: allocate channels for XDP tx queues") Reported-by:
Tianhao Zhao <tizhao@redhat.com> Signed-off-by:
Íñigo Huguet <ihuguet@redhat.com> Acked-by:
Martin Habets <habetsm.xilinx@gmail.com> Signed-off-by:
-
