- 26 Aug, 2021 24 commits
-
-
Srikar Dronamraju authored
Currently, a debug message gets printed every time an attempt to add(remove) a CPU. However this is redundant if the CPU is already added (removed) from the node. Signed-off-by:
Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210826100521.412639-4-srikar@linux.vnet.ibm.com
-
Srikar Dronamraju authored
Convert the remaining printk to pr_xxx One advantage would be all prints will now have prefix "numa:" from pr_fmt(). [ convert printk(KERN_ERR) to pr_warn : Suggested by Laurent Dufour ] Suggested-by:
-
Srikar Dronamraju authored
powerpc supported numa=debug which is not documented. This option was used to print early debug output. However something more flexible can be achieved by using CONFIG_DYNAMIC_DEBUG. Hence drop dbg (and numa=debug) in favour of pr_debug Suggested-by:
-
Srikar Dronamraju authored
Currently CACHE domain is not enabled on shared processor mode PowerVM LPARS. On PowerVM systems, 'ibm,thread-group' device-tree property 2 under cpu-device-node indicates which all CPUs share L2-cache. However 'ibm,thread-group' device-tree property 2 is a relatively new property. In absence of 'ibm,thread-group' property 2, 'l2-cache' device property under cpu-device-node could help system to identify CPUs sharing L2-cache. However this property is not exposed by PhyP in shared processor mode configurations. In absence of properties that inform OS about which CPUs share L2-cache, fallback on core boundary. Here are some stats from Power9 shared LPAR with the changes. $ lscpu Architecture: ppc64le Byte Order: Little Endian CPU(s): 32 On-line CPU(s) list: 0-31 Thread(s) per core: 8 Core(s) per socket: 1 Socket(s): 3 NUMA node(s): 2 Model: 2.2 (pvr 004e 0202) Model name: POWER9 (architected), altivec supported Hypervisor vendor: pHyp Virtualization type: para L1d cache: 32K L1i cache: 32K NUMA node0 CPU(s): 16-23 NUMA node1 CPU(s): 0-15,24-31 Physical sockets: 2 Physical chips: 1 Physical cores/chip: 10 Before patch $ grep -r . /sys/kernel/debug/sched/domains/cpu0/domain*/name Before /sys/kernel/debug/sched/domains/cpu0/domain0/name:SMT /sys/kernel/debug/sched/domains/cpu0/domain1/name:DIE /sys/kernel/debug/sched/domains/cpu0/domain2/name:NUMA After /sys/kernel/debug/sched/domains/cpu0/domain0/name:SMT /sys/kernel/debug/sched/domains/cpu0/domain1/name:CACHE /sys/kernel/debug/sched/domains/cpu0/domain2/name:DIE /sys/kernel/debug/sched/domains/cpu0/domain3/name:NUMA $ awk '/domain/{print $1, $2}' /proc/schedstat | sort -u | sed -e 's/00000000,//g' Before domain0 00000055 domain0 000000aa domain0 00005500 domain0 0000aa00 domain0 00550000 domain0 00aa0000 domain0 55000000 domain0 aa000000 domain1 00ff0000 domain1 ff00ffff domain2 ffffffff After domain0 00000055 domain0 000000aa domain0 00005500 domain0 0000aa00 domain0 00550000 domain0 00aa0000 domain0 55000000 domain0 aa000000 domain1 000000ff domain1 0000ff00 domain1 00ff0000 domain1 ff000000 domain2 ff00ffff domain2 ffffffff domain3 ffffffff (Lower is better) perf stat -a -r 5 -n perf bench sched pipe | tail -n 2 Before 153.798 +- 0.142 seconds time elapsed ( +- 0.09% ) After 111.545 +- 0.652 seconds time elapsed ( +- 0.58% ) which is an improvement of 27.47% Signed-off-by:Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by:
-
Srikar Dronamraju authored
lscpu() uses core_siblings to list the number of sockets in the system. core_siblings is set using topology_core_cpumask. While optimizing the powerpc bootup path, Commit 4ca234a9 ("powerpc/smp: Stop updating cpu_core_mask"). it was found that updating cpu_core_mask() ended up taking a lot of time. It was thought that on Powerpc, cpu_core_mask() would always be same as cpu_cpu_mask() i.e number of sockets will always be equal to number of nodes. As an optimization, cpu_core_mask() was made a snapshot of cpu_cpu_mask(). However that was found to be false with PowerPc KVM guests, where each node could have more than one socket. So with Commit c47f892d ("powerpc/smp: Reintroduce cpu_core_mask"), cpu_core_mask was updated based on chip_id but in an optimized way using some mask manipulations and chip_id caching. However on non-PowerNV and non-pseries KVM guests (i.e not implementing cpu_to_chip_id(), continued to use a copy of cpu_cpu_mask(). There are two issues that were noticed on such systems 1. lscpu would report one extra socket. On a IBM,9009-42A (aka zz system) which has only 2 chips/ sockets/ nodes, lscpu would report Architecture: ppc64le Byte Order: Little Endian CPU(s): 160 On-line CPU(s) list: 0-159 Thread(s) per core: 8 Core(s) per socket: 6 Socket(s): 3 <-------------- NUMA node(s): 2 Model: 2.2 (pvr 004e 0202) Model name: POWER9 (architected), altivec supported Hypervisor vendor: pHyp Virtualization type: para L1d cache: 32K L1i cache: 32K L2 cache: 512K L3 cache: 10240K NUMA node0 CPU(s): 0-79 NUMA node1 CPU(s): 80-159 2. Currently cpu_cpu_mask is updated when a core is added/removed. However its not updated when smt mode switching or on CPUs are explicitly offlined. However all other percpu masks are updated to ensure only active/online CPUs are in the masks. This results in build_sched_domain traces since there will be CPUs in cpu_cpu_mask() but those CPUs are not present in SMT / CACHE / MC / NUMA domains. A loop of threads running smt mode switching and core add/remove will soon show this trace. Hence cpu_cpu_mask has to be update at smt mode switch. This will have impact on cpu_core_mask(). cpu_core_mask() is a snapshot of cpu_cpu_mask. Different CPUs within the same socket will end up having different cpu_core_masks since they are snapshots at different points of time. This means when lscpu will start reporting many more sockets than the actual number of sockets/ nodes / chips. Different ways to handle this problem: A. Update the snapshot aka cpu_core_mask for all CPUs whenever cpu_cpu_mask is updated. This would a non-optimal solution. B. Instead of a cpumask_var_t, make cpu_core_map a cpumask pointer pointing to cpu_cpu_mask. However percpu cpumask pointer is frowned upon and we need a clean way to handle PowerPc KVM guest which is not a snapshot. C. Update cpu_core_masks all PowerPc systems like in PowerPc KVM guests using mask manipulations. This approach is relatively simple and unifies with the existing code. D. On top of 3, we could also resurrect get_physical_package_id which could return a nid for the said CPU. However this is not needed at this time. Option C is the preferred approach for now. While this is somewhat a revert of Commit 4ca234a9 ("powerpc/smp: Stop updating cpu_core_mask"). 1. Plain revert has some conflicts 2. For chip_id == -1, the cpu_core_mask is made identical to cpu_cpu_mask, unlike previously where cpu_core_mask was set to a core if chip_id doesn't exist. This goes by the principle that if chip_id is not exposed, then sockets / chip / node share the same set of CPUs. With the fix, lscpu o/p would be Architecture: ppc64le Byte Order: Little Endian CPU(s): 160 On-line CPU(s) list: 0-159 Thread(s) per core: 8 Core(s) per socket: 6 Socket(s): 2 <-------------- NUMA node(s): 2 Model: 2.2 (pvr 004e 0202) Model name: POWER9 (architected), altivec supported Hypervisor vendor: pHyp Virtualization type: para L1d cache: 32K L1i cache: 32K L2 cache: 512K L3 cache: 10240K NUMA node0 CPU(s): 0-79 NUMA node1 CPU(s): 80-159 Fixes: 4ca234a9 ("powerpc/smp: Stop updating cpu_core_mask") Signed-off-by:
-
Srikar Dronamraju authored
Aneesh reported a crash with a fairly recent upstream kernel when booting kernel whose commandline was appended with nr_cpus=2 1:mon> e cpu 0x1: Vector: 300 (Data Access) at [c000000008a67bd0] pc: c00000000002557c: cpu_to_chip_id+0x3c/0x100 lr: c000000000058380: start_secondary+0x460/0xb00 sp: c000000008a67e70 msr: 8000000000001033 dar: 10 dsisr: 80000 current = 0xc00000000891bb00 paca = 0xc0000018ff981f80 irqmask: 0x03 irq_happened: 0x01 pid = 0, comm = swapper/1 Linux version 5.13.0-rc3-15704-ga050a6d2 (kvaneesh@ltc-boston8) (gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #433 SMP Tue May 25 02:38:49 CDT 2021 1:mon> t [link register ] c000000000058380 start_secondary+0x460/0xb00 [c000000008a67e70] c000000008a67eb0 (unreliable) [c000000008a67eb0] c0000000000589d4 start_secondary+0xab4/0xb00 [c000000008a67f90] c00000000000c654 start_secondary_prolog+0x10/0x14 Current code assumes that num_possible_cpus() is always greater than threads_per_core. However this may not be true when using nr_cpus=2 or similar options. Handle the case where num_possible_cpus() is not an exact multiple of threads_per_core. Fixes: c1e53367 ("powerpc/smp: Cache CPU to chip lookup") Reported-by:Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by:
-
Joel Stanley authored
When booting with systemd these options are required. This increases the image by about 50KB, or 2%. Signed-off-by:
Joel Stanley <joel@jms.id.au> Signed-off-by:
-
Joel Stanley authored
Liteeth is the network device used by Microwatt. Signed-off-by:
-
Joel Stanley authored
The liteeth network device is used in the Microwatt soc. Signed-off-by:
-
Christophe Leroy authored
HMT_xxx macros are macros for adjusting thread priority (hardware multi-threading) are macros inherited from PPC64 via commit 5f7c6907 ("[PATCH] powerpc: Merged ppc_asm.h") Those instructions are pointless on PPC32, but some common fonctions like arch_cpu_idle() use them. So make them empty on PPC32 to avoid those instructions. Signed-off-by:
Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by:
-
Aneesh Kumar K.V authored
Fix make htmldocs related errors with the newly added associativity.rst doc file. Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Tested-by: Stephen Rothwell <sfr@canb.auug.org.au> # build test Signed-off-by:
-
Michael Ellerman authored
Merge the changes to retire the legacy WR sbc8548 and sbc8641 platforms from Paul. These were sent as a pull request, but I rebased them onto rc2 so as not to pull too many unrelated changes in to my next. Description from Paul's pull request follows: In v2.6.27 (2008, 917f0af9) the sbc8260 support was implicitly retired by not being carried forward through the ppc --> powerpc device tree transition. Then, in v3.6 (2012, b048b4e1) we retired the support for the sbc8560 boards. Next, in v4.18 (2017, 3bc6cf5a) we retired the support for the 2006 vintage sbc834x boards. The sbc8548 and sbc8641d boards were maybe 1-2 years newer than the sbc834x boards, but it is also 3+ years later, so it makes sense to now retire them as well - which is what is done here. These two remaining WR boards were based on the Freescale MPC8548-CDS and the MPC8641D-HPCN reference board implementations. Having had the chance to use these and many other Fsl ref boards, I know this: The Freescale reference boards were typically produced in limited quantity and primarily available to BSP developers and hardware designers, and not likely to have found a 2nd life with hobbyists and/or collectors. It was good to have that BSP code subjected to mainline review and hence also widely available back in the day. But given the above, we should probably also be giving serious consideration to retiring additional similar age/type reference board platforms as well. I've always felt it is important for us to be proactive in retiring old code, since it has a genuine non-zero carrying cost, as described in the 930d52c0 merge log. But for the here and now, we just clean up the remaining BSP code that I had added for SBC platforms. Link: https://lore.kernel.org/r/20210824174209.GB160508@windriver.com
-
Paul Gortmaker authored
Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by:
-
Paul Gortmaker authored
The support was for this was added to mainline over 12 years ago, in v2.6.26 [4e8aae89] just around the ppc --> powerpc migration. I believe the board was introduced shortly after the sbc8548 board, making it roughly a 14 year old platform - with the CPU speed and memory size typical for that era. I haven't had one of these boards for several years, and availability was discontinued several years before that. Given that, there is no point in adding a burden to testing coverage that builds all possible defconfigs, so it makes sense to remove it. Of course it will remain in the git history forever, for anyone who happens to find a functional board and wants to tinker with it. Acked-by:
Scott Wood <oss@buserror.net> Signed-off-by:
-
Paul Gortmaker authored
The support was for this was mainlined 13 years ago, in v2.6.25 [0e0fffe8] just around the ppc --> powerpc migration. I believe the board was introduced a year or two before that, so it is roughly a 15 year old platform - with the CPU speed and memory size that was typical for that era. I haven't had one of these boards for several years, and availability was discontinued several years before that. Given that, there is no point in adding a burden to testing coverage that builds all possible defconfigs, so it makes sense to remove it. Of course it will remain in the git history forever, for anyone who happens to find a functional board and wants to tinker with it. Acked-by:
-
Michael Ellerman authored
Merge some KVM patches we are keeping in a topic branch in case there are any merge conflicts that need resolving.
-
Christophe Leroy authored
40x and BOOKE don't have MSR_RI therefore all tests involving MSR_RI may be problematic on those plateforms. Create helpers to check or set MSR_RI in regs, and use them in common code. Signed-off-by:
-
Christophe Leroy authored
In those hot functions that are called at every interrupt, any saved cycle is worth it. interrupt_exit_user_prepare() and interrupt_exit_kernel_prepare() are called from three places: - From entry_32.S - From interrupt_64.S - From interrupt_exit_user_restart() and interrupt_exit_kernel_restart() In entry_32.S, there are inambiguously called based on MSR_PR: interrupt_return: lwz r4,_MSR(r1) addi r3,r1,STACK_FRAME_OVERHEAD andi. r0,r4,MSR_PR beq .Lkernel_interrupt_return bl interrupt_exit_user_prepare ... .Lkernel_interrupt_return: bl interrupt_exit_kernel_prepare In interrupt_64.S, that's similar: interrupt_return_\srr\(): ld r4,_MSR(r1) andi. r0,r4,MSR_PR beq interrupt_return_\srr\()_kernel interrupt_return_\srr\()_user: /* make backtraces match the _kernel variant */ addi r3,r1,STACK_FRAME_OVERHEAD bl interrupt_exit_user_prepare ... interrupt_return_\srr\()_kernel: addi r3,r1,STACK_FRAME_OVERHEAD bl interrupt_exit_kernel_prepare In interrupt_exit_user_restart() and interrupt_exit_kernel_restart(), MSR_PR is verified respectively by BUG_ON(!user_mode(regs)) and BUG_ON(user_mode(regs)) prior to calling interrupt_exit_user_prepare() and interrupt_exit_kernel_prepare(). The verification in interrupt_exit_user_prepare() and interrupt_exit_kernel_prepare() are therefore useless and can be removed. Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
-
Xiongwei Song authored
Use _DEAR to get the offset of dear register in pr_regs for 64e cpus. Signed-off-by:
Xiongwei Song <sxwjean@gmail.com> Signed-off-by:
-
Xiongwei Song authored
Create an anonymous union for dar and dear regsiters, we can reference dear to get the effective address when CONFIG_4xx=y or CONFIG_BOOKE=y. Otherwise, reference dar. This makes code more clear. Signed-off-by:
-
Xiongwei Song authored
Use _ESR to get the offset of esr register in pr_regs for 64e cpus. Signed-off-by:
-
Xiongwei Song authored
Create an anonymous union for dsisr and esr regsiters, we can reference esr to get the exception detail when CONFIG_4xx=y or CONFIG_BOOKE=y. Otherwise, reference dsisr. This makes code more clear. Signed-off-by:
-
Jordan Niethe authored
Transactional Memory was removed from the architecture in ISA v3.1. For threads running in P8/P9 compatibility mode on P10 a synthetic TM implementation is provided. In this implementation, tbegin. always sets cr0 eq meaning the abort handler is always called. This is not an issue as users of TM are expected to have a fallback non transactional way to make forward progress in the abort handler. The TEXASR indicates if a transaction failure is due to a synthetic implementation. Some of the TM self tests need a non-degenerate TM implementation for their testing to be meaningful so check for a synthetic implementation and skip the test if so. Signed-off-by:
Jordan Niethe <jniethe5@gmail.com> Signed-off-by:
-
Jordan Niethe authored
ISA v3.1 removes TM but includes a synthetic implementation for backwards compatibility. With this implementation, the tests ptrace-tm-spd-gpr and ptrace-tm-gpr should never be able to make any forward progress and eventually should be killed by the timeout. Instead on a P10 running in P9 mode, ptrace_tm_gpr fails like so: test: ptrace_tm_gpr tags: git_version:unknown Starting the child ... ... GPR[27]: 1 Expected: 2 GPR[28]: 1 Expected: 2 GPR[29]: 1 Expected: 2 GPR[30]: 1 Expected: 2 GPR[31]: 1 Expected: 2 [FAIL] Test FAILED on line 98 failure: ptrace_tm_gpr selftests: ptrace-tm-gpr [FAIL] The problem is in the inline assembly of the child. r0 is loaded with a value in the child's transaction abort handler but this register is not included in the clobbers list. This means it is possible that this statement: cptr[1] = 0; which is meant to signal the parent to wait may actually use the value placed into r0 by the inline assembly incorrectly signal the parent to continue. By inspection the same problem is present in ptrace-tm-spd-gpr. Adding r0 to the clobbbers list makes the test fail correctly via a timeout on a P10 running in P8/P9 compatibility mode. Suggested-by:
Michael Neuling <mikey@neuling.org> Signed-off-by:
-
- 25 Aug, 2021 16 commits
-
-
Kajol Jain authored
Incase of random sampling, there can be scenarios where Sample Instruction Address Register(SIAR) may not latch to the sampled instruction and could result in the value of 0. In these scenarios it is preferred to return regs->nip. These corner cases are seen in the previous generation (p9) also. Patch adds the check for SIAR value along with regs_use_siar and siar_valid checks so that the function will return regs->nip incase SIAR is zero. Patch drops the code under PPMU_P10_DD1 flag check which handles SIAR 0 case only for Power10 DD1. Fixes: 2ca13a4c ("powerpc/perf: Use regs->nip when SIAR is zero") Signed-off-by:
Kajol Jain <kjain@linux.ibm.com> Signed-off-by:
-
Kajol Jain authored
Drop the case of returning 0 as instruction pointer since kernel never executes at 0 and userspace almost never does either. Fixes: e6878835 ("powerpc/perf: Sample only if SIAR-Valid bit is set in P7+") Signed-off-by:
-
Kajol Jain authored
Minor optimization in the 'perf_instruction_pointer' function code by making use of stack siar instead of mfspr. Fixes: 75382aa7 ("powerpc/perf: Move code to select SIAR or pt_regs into perf_read_regs") Signed-off-by:
Nageswara R Sastry <rnsastry@linux.ibm.com> Signed-off-by:
-
Nicholas Piggin authored
This register is not architected and not implemented in POWER9 or 10, it just reads back zeroes for compatibility. Signed-off-by:
Fabiano Rosas <farosas@linux.ibm.com> Link: https://lore.kernel.org/r/20210811160134.904987-11-npiggin@gmail.com
-
Nicholas Piggin authored
After the L1 saves its PMU SPRs but before loading the L2's PMU SPRs, switch the pmcregs_in_use field in the L1 lppaca to the value advertised by the L2 in its VPA. On the way out of the L2, set it back after saving the L2 PMU registers (if they were in-use). This transfers the PMU liveness indication between the L1 and L2 at the points where the registers are not live. This fixes the nested HV bug for which a workaround was added to the L0 HV by commit 63279eeb ("KVM: PPC: Book3S HV: Always save guest pmu for guest capable of nesting"), which explains the problem in detail. That workaround is no longer required for guests that include this bug fix. Fixes: 360cae31 ("KVM: PPC: Book3S HV: Nested guest entry via hypercall") Signed-off-by:
-
Fabiano Rosas authored
vcpu is already anargument so vcpu->arch.trap can be used directly. Signed-off-by:
-
Fabiano Rosas authored
If the nested hypervisor has no access to a facility because it has been disabled by the host, it should also not be able to see the Hypervisor Facility Unavailable that arises from one of its guests trying to access the facility. This patch turns a HFU that happened in L2 into a Hypervisor Emulation Assistance interrupt and forwards it to L1 for handling. The ones that happened because L1 explicitly disabled the facility for L2 are still let through, along with the corresponding Cause bits in the HFSCR. Signed-off-by:
-
Nicholas Piggin authored
When the L0 runs a nested L2, there are several permutations of HFSCR that can be relevant. The HFSCR that the L1 vcpu L1 requested, the HFSCR that the L1 vcpu may use, and the HFSCR that is actually being used to run the L2. The L1 requested HFSCR is not accessible outside the nested hcall handler, so copy that into a new kvm_nested_guest.hfscr field. The permitted HFSCR is taken from the HFSCR that the L1 runs with, which is also not accessible while the hcall is being made. Move this into a new kvm_vcpu_arch.hfscr_permitted field. These will be used by the next patch to improve facility handling for nested guests, and later by facility demand faulting patches. Signed-off-by:
-
Fabiano Rosas authored
As one of the arguments of the H_ENTER_NESTED hypercall, the nested hypervisor (L1) prepares a structure containing the values of various hypervisor-privileged registers with which it wants the nested guest (L2) to run. Since the nested HV runs in supervisor mode it needs the host to write to these registers. To stop a nested HV manipulating this mechanism and using a nested guest as a proxy to access a facility that has been made unavailable to it, we have a routine that sanitises the values of the HV registers before copying them into the nested guest's vcpu struct. However, when coming out of the guest the values are copied as they were back into L1 memory, which means that any sanitisation we did during guest entry will be exposed to L1 after H_ENTER_NESTED returns. This patch alters this sanitisation to have effect on the vcpu->arch registers directly before entering and after exiting the guest, leaving the structure that is copied back into L1 unchanged (except when we really want L1 to access the value, e.g the Cause bits of HFSCR). Signed-off-by:
-
Nicholas Piggin authored
Have the TM softpatch emulation code set up the HFAC interrupt and return -1 in case an instruction was executed with HFSCR bits clear, and have the interrupt exit handler fall through to the HFAC handler. When the L0 is running a nested guest, this ensures the HFAC interrupt is correctly passed up to the L1. The "direct guest" exit handler will turn these into PROGILL program interrupts so functionality in practice will be unchanged. But it's possible an L1 would want to handle these in a different way. Also rearrange the FAC interrupt emulation code to match the HFAC format while here (mainly, adding the FSCR_INTR_CAUSE mask). Signed-off-by:
-
Nicholas Piggin authored
The softpatch interrupt sets HSRR0 to the faulting instruction +4, so it should subtract 4 for the faulting instruction address in the case it is a TM softpatch interrupt (the instruction was not executed) and it was not emulated. Signed-off-by:
-
Nicholas Piggin authored
TM fake-suspend emulation is only used by POWER9. Remove it from the old code path. Signed-off-by:
-
Nicholas Piggin authored
It is possible to create a VCPU without setting the MSR before running it, which results in a warning in kvmhv_vcpu_entry_p9() that MSR_ME is not set. This is pretty harmless because the MSR_ME bit is added to HSRR1 before HRFID to guest, and a normal qemu guest doesn't hit it. Initialise the vcpu MSR with MSR_ME set. Reported-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by:
-
Christophe Leroy authored
Force the eh flag at 0 on PPC32. Signed-off-by:
-
Christophe Leroy authored
Today we have: #ifdef __powerpc64__ #define user_mode(regs) ((((regs)->msr) >> MSR_PR_LG) & 0x1) #else #define user_mode(regs) (((regs)->msr & MSR_PR) != 0) #endif With ppc64_defconfig, we get: if (!user_mode(regs)) 14b4: e9 3e 01 08 ld r9,264(r30) 14b8: 71 29 40 00 andi. r9,r9,16384 14bc: 41 82 07 a4 beq 1c60 <.emulate_instruction+0x7d0> If taking the ppc32 definition of user_mode(), the exact same code is generated for ppc64_defconfig. So, only keep one version of user_mode(), preferably the one not using MSR_PR_LG which should be kept internal to reg.h. Signed-off-by: -
Christophe Leroy authored
When shift is nul, operations remain valid so no test needed. And 'ret' is unnecessary. And use IS_ALIGNED() to check alignment, that's more clear. Signed-off-by:
-
