- 26 Apr, 2017 1 commit
-
-
Trond Myklebust authored
EACCES, EDQUOT, EFBIG and ESTALE are all fatal errors as far as NFS I/O is concerned. They need to be reported back to the application. Signed-off-by:Trond Myklebust <trond.myklebust@primarydata.com>
-
- 25 Apr, 2017 18 commits
-
-
git://git.linux-nfs.org/projects/anna/nfs-rdmaTrond Myklebust authored
NFS: NFS over RDMA Client Side Changes New Features: - Break RDMA connections after a connection timeout - Support for unloading the underlying device driver Bugfixes and cleanups: - Mark the receive workqueue as "read-mostly" - Silence warnings caused by ENOBUFS - Update a comment in xdr_init_decode_pages() - Remove rpcrdma_buffer->rb_pool.
-
Trond Myklebust authored
Fix compiler warnings. Signed-off-by: -
Chuck Lever authored
Since commit 1e465fd4 ("xprtrdma: Replace send and receive arrays"), this field is no longer used. Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com>
-
Chuck Lever authored
Clean up. Signed-off-by:
-
Chuck Lever authored
When ro_map is out of buffers, that's not a permanent error, so don't report a problem. Signed-off-by:
-
Chuck Lever authored
Micro-optimize the receive workqueue by marking it's anchor "read- mostly." Signed-off-by:
-
Chuck Lever authored
Device removal is now adequately supported. Pinning the underlying device driver to prevent removal while an NFS mount is active is no longer necessary. Signed-off-by:
-
Chuck Lever authored
After a device removal, enable the transport connect worker to restore normal operation if there is another device with connectivity to the server. Signed-off-by:
-
Chuck Lever authored
I'm about to add another arm to if (ep->rep_connected != 0) It will be cleaner to use a switch statement here. We'll be looking for a couple of specific errnos, or "anything else," basically to sort out the difference between a normal reconnect and recovery from device removal. This is a refactoring change only. Signed-off-by: -
Chuck Lever authored
The device driver for the underlying physical device associated with an RPC-over-RDMA transport can be removed while RPC-over-RDMA transports are still in use (ie, while NFS filesystems are still mounted and active). The IB core performs a connection event upcall to request that consumers free all RDMA resources associated with a transport. There may be pending RPCs when this occurs. Care must be taken to release associated resources without leaving references that can trigger a subsequent crash if a signal or soft timeout occurs. We rely on the caller of the transport's ->close method to ensure that the previous RPC task has invoked xprt_release but the transport remains write-locked. A DEVICE_REMOVE upcall forces a disconnect then sleeps. When ->close is invoked, it destroys the transport's H/W resources, then wakes the upcall, which completes and allows the core driver unload to continue. BugLink: https://bugzilla.linux-nfs.org/show_bug.cgi?id=266Signed-off-by:
-
Chuck Lever authored
When the underlying device driver is reloaded, ia->ri_device will be replaced. All cached copies of that device pointer have to be updated as well. Commit 54cbd6b0 ("xprtrdma: Delay DMA mapping Send and Receive buffers") added the rg_device field to each regbuf. As part of handling a device removal, rpcrdma_dma_unmap_regbuf is invoked on all regbufs for a transport. Simply calling rpcrdma_dma_map_regbuf for each Receive buffer after the driver has been reloaded should reinitialize rg_device correctly for every case except rpcrdma_wc_receive, which still uses rpcrdma_rep::rr_device. Ensure the same device that was used to map a Receive buffer is also used to sync it in rpcrdma_wc_receive by using rg_device there instead of rr_device. This is the only use of rr_device, so it can be removed. The use of regbufs in the send path is also updated, for completeness. Fixes: 54cbd6b0 ("xprtrdma: Delay DMA mapping Send and ... ") Signed-off-by:
-
Chuck Lever authored
In order to unload a device driver and reload it, xprtrdma will need to close a transport's interface adapter, and then call rpcrdma_ia_open again, possibly finding a different interface adapter. Make rpcrdma_ia_open safe to call on the same transport multiple times. This is a refactoring change only. Signed-off-by:
-
Chuck Lever authored
Current NFS clients rely on connection loss to determine when to retransmit. In particular, for protocols like NFSv4, clients no longer rely on RPC timeouts to drive retransmission: NFSv4 servers are required to terminate a connection when they need a client to retransmit pending RPCs. When a server is no longer reachable, either because it has crashed or because the network path has broken, the server cannot actively terminate a connection. Thus NFS clients depend on transport-level keepalive to determine when a connection must be replaced and pending RPCs retransmitted. However, RDMA RC connections do not have a native keepalive mechanism. If an NFS/RDMA server crashes after a client has sent RPCs successfully (an RC ACK has been received for all OTW RDMA requests), there is no way for the client to know the connection is moribund. In addition, new RDMA requests are subject to the RPC-over-RDMA credit limit. If the client has consumed all granted credits with NFS traffic, it is not allowed to send another RDMA request until the server replies. Thus it has no way to send a true keepalive when the workload has already consumed all credits with pending RPCs. To address this, forcibly disconnect a transport when an RPC times out. This prevents moribund connections from stopping the detection of failover or other configuration changes on the server. Note that even if the connection is still good, retransmitting any RPC will trigger a disconnect thanks to this logic in xprt_rdma_send_request: /* Must suppress retransmit to maintain credits */ if (req->rl_connect_cookie == xprt->connect_cookie) goto drop_connection; req->rl_connect_cookie = xprt->connect_cookie; Signed-off-by:
-
Chuck Lever authored
xprt_force_disconnect() is already invoked from the socket transport. I want to invoke xprt_force_disconnect() from the RPC-over-RDMA transport, which is a separate module from sunrpc.ko. Signed-off-by:
-
Chuck Lever authored
Trying to create MRs while the transport is being torn down can cause a crash. Fixes: e2ac236c ("xprtrdma: Allocate MRs on demand") Signed-off-by:
-
Trond Myklebust authored
If the server has already returned a fatal write error that the user has not yet received on this file, then don't write back the other pages. Instead, act as if they have been sent, and have returned with the same error. Signed-off-by: -
Trond Myklebust authored
The assumption should be that if the caller returns PNFS_ATTEMPTED, then hdr has been consumed, and so we should not be testing hdr->task.tk_status. If the caller returns PNFS_TRY_AGAIN, then we need to recoalesce and free hdr. Signed-off-by: -
Trond Myklebust authored
If we have a layout segment cached in pgio->pg_lseg, we should check it for validity before reusing it in a new RPC request. Otherwise, if we recoalesce, we can end up looping forever. Signed-off-by:
-
- 21 Apr, 2017 6 commits
-
-
Benjamin Coddington authored
NFS attempts to wait for read and write completion before unlocking in order to ensure that the data returned was protected by the lock. When this waiting is interrupted by a signal, the unlock may be skipped, and messages similar to the following are seen in the kernel ring buffer: [20.167876] Leaked locks on dev=0x0:0x2b ino=0x8dd4c3: [20.168286] POSIX: fl_owner=ffff880078b06940 fl_flags=0x1 fl_type=0x0 fl_pid=20183 [20.168727] POSIX: fl_owner=ffff880078b06680 fl_flags=0x1 fl_type=0x0 fl_pid=20185 For NFSv3, the missing unlock will cause the server to refuse conflicting locks indefinitely. For NFSv4, the leftover lock will be removed by the server after the lease timeout. This patch fixes this issue by skipping the usual wait in nfs_iocounter_wait if the FL_CLOSE flag is set when signaled. Instead, the wait happens in the unlock RPC task on the NFS UOC rpc_waitqueue. For NFSv3, use lockd's new nlmclnt_operations along with nfs_async_iocounter_wait to defer NLM's unlock task until the lock context's iocounter reaches zero. For NFSv4, call nfs_async_iocounter_wait() directly from unlock's current rpc_call_prepare. Signed-off-by:
Benjamin Coddington <bcodding@redhat.com> Reviewed-by:
Jeff Layton <jlayton@redhat.com> Signed-off-by:
-
Benjamin Coddington authored
NFS would enjoy the ability to modify the behavior of the NLM client's unlock RPC task in order to delay the transmission of the unlock until IO that was submitted under that lock has completed. This ability can ensure that the NLM client will always complete the transmission of an unlock even if the waiting caller has been interrupted with fatal signal. For this purpose, a pointer to a struct nlmclnt_operations can be assigned in a nfs_module's nfs_rpc_ops that will install those nlmclnt_operations on the nlm_host. The struct nlmclnt_operations defines three callback operations that will be used in a following patch: nlmclnt_alloc_call - used to call back after a successful allocation of a struct nlm_rqst in nlmclnt_proc(). nlmclnt_unlock_prepare - used to call back during NLM unlock's rpc_call_prepare. The NLM client defers calling rpc_call_start() until this callback returns false. nlmclnt_release_call - used to call back when the NLM client's struct nlm_rqst is freed. Signed-off-by:
-
Benjamin Coddington authored
By sleeping on a new NFS Unlock-On-Close waitqueue, rpc tasks may wait for a lock context's iocounter to reach zero. The rpc waitqueue is only woken when the open_context has the NFS_CONTEXT_UNLOCK flag set in order to mitigate spurious wake-ups for any iocounter reaching zero. Signed-off-by:
-
Benjamin Coddington authored
Set FL_CLOSE in fl_flags as in locks_remove_posix() when clearing locks. NFS will check for this flag to ensure an unlock is sent in a following patch. Fuse handles flock and posix locks differently for FL_CLOSE, and so requires a fixup to retain the existing behavior for flock. Signed-off-by:
Miklos Szeredi <miklos@szeredi.hu> Signed-off-by:
-
Benjamin Coddington authored
We only need to check lock exclusive/shared types against open mode when flock() is used on NFS, so move it into the flock-specific path instead of checking it for all locks. Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
-
Benjamin Coddington authored
flock64_to_posix_lock() is already doing this check Signed-off-by:
Jeff Layton <jeff.layton@primarydata.com> Reviewed-by:
-
- 20 Apr, 2017 15 commits
-
-
Trond Myklebust authored
It is not used outside the NFSv4 module. Signed-off-by: -
Trond Myklebust authored
They are not used outside the NFSv4 module. Signed-off-by: -
Trond Myklebust authored
encode_layoutreturn and encode_layoutcommit are now unused. Let's remove them. Signed-off-by: -
Christoph Hellwig authored
The objlayout code has been in the tree, but it's been unmaintained and no server product for it actually ever shipped. Signed-off-by:
-
Trond Myklebust authored
The check in nfs4_ff_layout_prepare_ds() seems to be missing. Signed-off-by:
-
Trond Myklebust authored
If the server fails to return the attributes as part of an OPEN reply, and then reboots, we can end up hanging. The reason is that the client attempts to send a GETATTR in order to pick up the missing OPEN call, but fails to release the slot first, causing reboot recovery to deadlock. Signed-off-by:
-
Benjamin Coddington authored
Let's try to have it in a cacheline in nfs4_proc_pgio_rpc_prepare(). Signed-off-by:
-
Benjamin Coddington authored
Since commit 00bfa30a ("NFS: Create a common pgio_alloc and pgio_release function"), nfs_pgarray_set() has only a single caller. Let's open code it. Signed-off-by:
-
Benjamin Coddington authored
Prevent a deadlock that can occur if we wait on allocations that try to write back our pages. Signed-off-by:
-
Fred Isaman authored
Signed-off-by:
Fred Isaman <fred.isaman@gmail.com> Fixes: 0bcbf039 ("nfs: handle request add failure properly") Cc: stable@vger.kernel.org # v4.5+ Signed-off-by:
-
Benjamin Coddington authored
Commit a7d42ddb ("nfs: add mirroring support to pgio layer") moved pg_cleanup out of the path when there was non-sequental I/O that needed to be flushed. The result is that for layouts that have more than one layout segment per file, the pg_lseg is not cleared, so we can end up hitting the WARN_ON_ONCE(req_start >= seg_end) in pnfs_generic_pg_test since the pg_lseg will be pointing to that previously-flushed layout segment. Signed-off-by:
-
NeilBrown authored
When mempool_alloc() is allowed to sleep (GFP_NOIO allows sleeping) it cannot fail. So rpc_alloc_task() cannot fail, so rpc_new_task doesn't need to test for failure. Consequently rpc_new_task() cannot fail, so the callers don't need to test. Signed-off-by:
NeilBrown <neilb@suse.com> Signed-off-by:
-
NeilBrown authored
When passed GFP flags that allow sleeping (such as GFP_NOIO), mempool_alloc() will never return NULL, it will wait until memory is available. This means that we don't need to handle failure, but that we do need to ensure one thread doesn't call mempool_alloc() twice on the one pool without queuing or freeing the first allocation. If multiple threads did this during times of high memory pressure, the pool could be exhausted and a deadlock could result. pnfs_generic_alloc_ds_commits() attempts to allocate from the nfs_commit_mempool while already holding an allocation from that pool. This is not safe. So change nfs_commitdata_alloc() to take a flag that indicates whether failure is acceptable. In pnfs_generic_alloc_ds_commits(), accept failure and handle it as we currently do. Else where, do not accept failure, and do not handle it. Even when failure is acceptable, we want to succeed if possible. That means both - using an entry from the pool if there is one - waiting for direct reclaim is there isn't. We call mempool_alloc(GFP_NOWAIT) to achieve the first, then kmem_cache_alloc(GFP_NOIO|__GFP_NORETRY) to achieve the second. Each of these can fail, but together they do the best they can without blocking indefinitely. The objects returned by kmem_cache_alloc() will still be freed by mempool_free(). This is safe as mempool_alloc() uses exactly the same function to allocate objects (since the mempool was created with mempool_create_slab_pool()). The object returned by mempool_alloc() and kmem_cache_alloc() are indistinguishable so mempool_free() will handle both identically, either adding to the pool or calling kmem_cache_free(). Also, don't test for failure when allocating from nfs_wdata_mempool. Signed-off-by:
-
Anna Schumaker authored
Signed-off-by:
-
Anna Schumaker authored
Signed-off-by:
-
