- 29 Sep, 2022 12 commits
-
-
Martin KaFai Lau authored
The v6_rcv_saddr and rcv_saddr are inside a union in the 'struct inet_bind2_bucket'. When searching a bucket by following the bhash2 hashtable chain, eg. inet_bind2_bucket_match, it is only using the sk->sk_family and there is no way to check if the inet_bind2_bucket has a v6 or v4 address in the union. This leads to an uninit-value KMSAN report in [0] and also potentially incorrect matches. This patch fixes it by adding a family member to the inet_bind2_bucket and then tests 'sk->sk_family != tb->family' before matching the sk's address to the tb's address. Cc: Joanne Koong <joannelkoong@gmail.com> Fixes: 28044fc1 ("net: Add a bhash2 table hashed by port and address") Signed-off-by:
Martin KaFai Lau <martin.lau@kernel.org> Reviewed-by:
Eric Dumazet <edumazet@google.com> Tested-by:
Alexander Potapenko <glider@google.com> Link: https://lore.kernel.org/r/20220927002544.3381205-1-kafai@fb.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Mat Martineau says: ==================== mptcp: MPTCP support for TCP_FASTOPEN_CONNECT RFC 8684 appendix B describes how to use TCP Fast Open with MPTCP. This series allows TFO use with MPTCP using the TCP_FASTOPEN_CONNECT socket option. The scope here is limited to the initiator of the connection - support for MSG_FASTOPEN and the listener side of the connection will be in a separate series. The preexisting TCP fastopen code does most of the work, so these changes mostly involve plumbing MPTCP through to those TCP functions. Patch 1 changes the MPTCP socket option code to pass the TCP_FASTOPEN_CONNECT option through to the initial unconnected subflow. Patch 2 exports the existing tcp_sendmsg_fastopen() function from tcp.c Patch 3 adds the call to tcp_sendmsg_fastopen() from the MPTCP send function. Patch 4 modifies mptcp_poll() to handle the deferred TFO connection. ==================== Link: https://lore.kernel.org/r/20220926232739.76317-1-mathew.j.martineau@linux.intel.comSigned-off-by:
-
Benjamin Hesmans authored
If fastopen is used, poll must allow a first write that will trigger the SYN+data Similar to what is done in tcp_poll(). Acked-by:
Paolo Abeni <pabeni@redhat.com> Reviewed-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by:
Benjamin Hesmans <benjamin.hesmans@tessares.net> Signed-off-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by:
-
Dmytro Shytyi authored
When TCP_FASTOPEN_CONNECT has been set on the socket before a connect, the defer flag is set and must be handled when sendmsg is called. This is similar to what is done in tcp_sendmsg_locked(). Acked-by:
Dmytro Shytyi <dmytro@shytyi.net> Signed-off-by:
-
Benjamin Hesmans authored
It will be used to support TCP FastOpen with MPTCP in the following commit. Acked-by:
-
Benjamin Hesmans authored
Set the option for the first subflow only. For the other subflows TFO can't be used because a mapping would be needed to cover the data in the SYN. Acked-by:
-
Gustavo A. R. Silva authored
Zero-length arrays are deprecated and we are moving towards adopting C99 flexible-array members, instead. So, replace zero-length arrays declarations in anonymous union with the new DECLARE_FLEX_ARRAY() helper macro. This helper allows for flexible-array members in unions. Link: https://github.com/KSPP/linux/issues/193 Link: https://github.com/KSPP/linux/issues/225 Link: https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.htmlSigned-off-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by:
Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/YzIvfGXxfjdXmIS3@workSigned-off-by:
-
Jakub Kicinski authored
Pavel Begunkov says: ==================== shrink struct ubuf_info struct ubuf_info is large but not all fields are needed for all cases. We have limited space in io_uring for it and large ubuf_info prevents some struct embedding, even though we use only a subset of the fields. It's also not very clean trying to use this typeless extra space. Shrink struct ubuf_info to only necessary fields used in generic paths, namely ->callback, ->refcnt and ->flags, which take only 16 bytes. And make MSG_ZEROCOPY and some other users to embed it into a larger struct ubuf_info_msgzc mimicking the former ubuf_info. Note, xen/vhost may also have some cleaning on top by creating new structs containing ubuf_info but with proper types. ==================== Link: https://lore.kernel.org/r/cover.1663892211.git.asml.silence@gmail.comSigned-off-by:
-
Pavel Begunkov authored
We can benefit from a smaller struct ubuf_info, so leave only mandatory fields and let users to decide how they want to extend it. Convert MSG_ZEROCOPY to struct ubuf_info_msgzc and remove duplicated fields. This reduces the size from 48 bytes to just 16. Signed-off-by:
Pavel Begunkov <asml.silence@gmail.com> Acked-by:
-
Pavel Begunkov authored
struct ubuf_info will be changed, use ubuf_info_msgzc instead. Signed-off-by:
-
Pavel Begunkov authored
struct ubuf_info will be changed, use ubuf_info_msgzc instead. Signed-off-by:
-
Pavel Begunkov authored
We're going to split struct ubuf_info and leave there only mandatory fields. Users are free to extend it. Add struct ubuf_info_msgzc, which will be an extended version for MSG_ZEROCOPY and some other users. It duplicates of struct ubuf_info for now and will be removed in a couple of patches. Signed-off-by:
-
- 28 Sep, 2022 28 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-nextJakub Kicinski authored
Florian Westphal says: ==================== netfilter fix for net-next This is a late bug fix for the *net-next* tree to make nftables "fib" expression play nice with VRF devices. This was broken since day 1 (v4.10) so I don't see a compelling reason to push this via net at the last minute. * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next: netfilter: nft_fib: Fix for rpath check with VRF devices ==================== Link: https://lore.kernel.org/r/20220928113908.4525-1-fw@strlen.deSigned-off-by:
-
Phil Sutter authored
Analogous to commit b575b24b ("netfilter: Fix rpfilter dropping vrf packets by mistake") but for nftables fib expression: Add special treatment of VRF devices so that typical reverse path filtering via 'fib saddr . iif oif' expression works as expected. Fixes: f6d0cbcf ("netfilter: nf_tables: add fib expression") Signed-off-by:
Phil Sutter <phil@nwl.cc> Signed-off-by:
Florian Westphal <fw@strlen.de>
-
David S. Miller authored
Edward Cree says: ==================== sfc: bare bones TC offload This series begins the work of supporting TC flower offload on EF100 NICs. This is the absolute minimum viable TC implementation to get traffic to VFs and allow them to be tested; it supports no match fields besides ingress port, no actions besides mirred and drop, and no stats. More matches, actions, and counters will be added in subsequent patches. Changed in v2: - Add missing 'static' on declarations (kernel test robot, sparse) ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Edward Cree authored
This is the absolute minimum viable TC implementation to get traffic to VFs and allow them to be tested; it supports no match fields besides ingress port, no actions besides mirred and drop, and no stats. Example usage: tc filter add dev $PF parent ffff: flower skip_sw \ action mirred egress mirror dev $VFREP tc filter add dev $VFREP parent ffff: flower skip_sw \ action mirred egress redirect dev $PF gives a VF unfiltered access to the network out the physical port ($PF acts here as a physical port representor). More matches, actions, and counters will be added in subsequent patches. Signed-off-by:Edward Cree <ecree.xilinx@gmail.com> Signed-off-by:
-
Edward Cree authored
Different versions of EF100 firmware and FPGA bitstreams support different matching capabilities in the Match-Action Engine. Probe for these at start of day; subsequent patches will validate TC offload requests against the reported capabilities. Signed-off-by:
-
Edward Cree authored
Nothing inserts into this table yet, but we have code to remove rules on FLOW_CLS_DESTROY or at driver teardown time, in both cases also attempting to remove the corresponding hardware rules. Signed-off-by:
-
Edward Cree authored
TC offload support will involve complex limitations on what matches and actions a rule can do, in some cases potentially depending on rules already offloaded. So add an ethtool private flag "log-tc-errors" which controls reporting the reasons for un-offloadable TC rules at NETIF_INFO. Signed-off-by:
-
Edward Cree authored
Bind indirect blocks for recognised tunnel netdevices. Currently these connect to a stub efx_tc_flower() that only returns -EOPNOTSUPP; subsequent patches will implement flower offloads to the Match-Action Engine. Signed-off-by:
-
Edward Cree authored
Bind direct blocks for the MAE-admin PF and each VF representor. Currently these connect to a stub efx_tc_flower() that only returns -EOPNOTSUPP; subsequent patches will implement flower offloads to the Match-Action Engine. Signed-off-by:
-
Gustavo A. R. Silva authored
Zero-length arrays are deprecated and we are moving towards adopting C99 flexible-array members, instead. So, replace zero-length arrays declarations in anonymous union with the new DECLARE_FLEX_ARRAY() helper macro. This helper allows for flexible-array members in unions. Link: https://github.com/KSPP/linux/issues/193 Link: https://github.com/KSPP/linux/issues/221 Link: https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.htmlSigned-off-by:
-
Zhengchao Shao authored
Both is_bpf and is_ebpf are boolean types, so (!is_bpf && !is_ebpf) || (is_bpf && is_ebpf) can be reduced to is_bpf == is_ebpf in tcf_bpf_init(). Signed-off-by:
Zhengchao Shao <shaozhengchao@huawei.com> Signed-off-by:
-
David S. Miller authored
Horatiu Vultur says: ==================== net: lan966x: Add tbf, cbs, ets support Add support for offloading QoS features with tc command to lan966x. The offloaded Qos features are tbf, cbs and ets. ==================== Signed-off-by: -
Horatiu Vultur authored
Add ets qdisc which allows to mix strict priority with bandwidth-sharing bands. The ets qdisc needs to be attached as root qdisc. Signed-off-by:
Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by:
-
Horatiu Vultur authored
Lan966x switch supports credit based shaper in hardware according to IEEE Std 802.1Q-2018 Section 8.6.8.2. Add support for cbs configuration on egress port of lan966x switch. Signed-off-by:
-
Horatiu Vultur authored
The tbf qdisc allows to attach a shaper on traffic egress on a port or on a queue. On port they are attached directly to the root and on queue they are attached on one of the classes of the parent qdisc. Signed-off-by:
-
David S. Miller authored
Zhengchao Shao says: ==================== net: add tc-testing qdisc test cases For this patchset, test cases of the qdisc modules are added to the tc-testing test suite. Last, thanks to Victor for testing and suggestion. After a test case is added locally, the test result is as follows: ./tdc.py -c atm ok 1 7628 - Create ATM with default setting ok 2 390a - Delete ATM with valid handle ok 3 32a0 - Show ATM class ok 4 6310 - Dump ATM stats ./tdc.py -c choke ok 1 8937 - Create CHOKE with default setting ok 2 48c0 - Create CHOKE with min packet setting ok 3 38c1 - Create CHOKE with max packet setting ok 4 234a - Create CHOKE with ecn setting ok 5 4380 - Create CHOKE with burst setting ok 6 48c7 - Delete CHOKE with valid handle ok 7 4398 - Replace CHOKE with min setting ok 8 0301 - Change CHOKE with limit setting ./tdc.py -c codel ok 1 983a - Create CODEL with default setting ok 2 38aa - Create CODEL with limit packet setting ok 3 9178 - Create CODEL with target setting ok 4 78d1 - Create CODEL with interval setting ok 5 238a - Create CODEL with ecn setting ok 6 939c - Create CODEL with ce_threshold setting ok 7 8380 - Delete CODEL with valid handle ok 8 289c - Replace CODEL with limit setting ok 9 0648 - Change CODEL with limit setting ./tdc.py -c etf ok 1 34ba - Create ETF with default setting ok 2 438f - Create ETF with delta nanos setting ok 3 9041 - Create ETF with deadline_mode setting ok 4 9a0c - Create ETF with skip_sock_check setting ok 5 2093 - Delete ETF with valid handle ./tdc.py -c fq ok 1 983b - Create FQ with default setting ok 2 38a1 - Create FQ with limit packet setting ok 3 0a18 - Create FQ with flow_limit setting ok 4 2390 - Create FQ with quantum setting ok 5 845b - Create FQ with initial_quantum setting ok 6 9398 - Create FQ with maxrate setting ok 7 342c - Create FQ with nopacing setting ok 8 6391 - Create FQ with refill_delay setting ok 9 238b - Create FQ with low_rate_threshold setting ok 10 7582 - Create FQ with orphan_mask setting ok 11 4894 - Create FQ with timer_slack setting ok 12 324c - Create FQ with ce_threshold setting ok 13 424a - Create FQ with horizon time setting ok 14 89e1 - Create FQ with horizon_cap setting ok 15 32e1 - Delete FQ with valid handle ok 16 49b0 - Replace FQ with limit setting ok 17 9478 - Change FQ with limit setting ./tdc.py -c gred ok 1 8942 - Create GRED with default setting ok 2 5783 - Create GRED with grio setting ok 3 8a09 - Create GRED with limit setting ok 4 48cb - Create GRED with ecn setting ok 5 763a - Change GRED setting ok 6 8309 - Show GRED class ./tdc.py -c hhf ok 1 4812 - Create HHF with default setting ok 2 8a92 - Create HHF with limit setting ok 3 3491 - Create HHF with quantum setting ok 4 ba04 - Create HHF with reset_timeout setting ok 5 4238 - Create HHF with admit_bytes setting ok 6 839f - Create HHF with evict_timeout setting ok 7 a044 - Create HHF with non_hh_weight setting ok 8 32f9 - Change HHF with limit setting ok 9 385e - Show HHF class ./tdc.py -c pfifo_fast ok 1 900c - Create pfifo_fast with default setting ok 2 7470 - Dump pfifo_fast stats ok 3 b974 - Replace pfifo_fast with different handle ok 4 3240 - Delete pfifo_fast with valid handle ok 5 4385 - Delete pfifo_fast with invalid handle ./tdc.py -c plug ok 1 3289 - Create PLUG with default setting ok 2 0917 - Create PLUG with block setting ok 3 483b - Create PLUG with release setting ok 4 4995 - Create PLUG with release_indefinite setting ok 5 389c - Create PLUG with limit setting ok 6 384a - Delete PLUG with valid handle ok 7 439a - Replace PLUG with limit setting ok 8 9831 - Change PLUG with limit setting ./tdc.py -c sfb ok 1 3294 - Create SFB with default setting ok 2 430a - Create SFB with rehash setting ok 3 3410 - Create SFB with db setting ok 4 49a0 - Create SFB with limit setting ok 5 1241 - Create SFB with max setting ok 6 3249 - Create SFB with target setting ok 7 30a9 - Create SFB with increment setting ok 8 239a - Create SFB with decrement setting ok 9 9301 - Create SFB with penalty_rate setting ok 10 2a01 - Create SFB with penalty_burst setting ok 11 3209 - Change SFB with rehash setting ok 12 5447 - Show SFB class ./tdc.py -c sfq ok 1 7482 - Create SFQ with default setting ok 2 c186 - Create SFQ with limit setting ok 3 ae23 - Create SFQ with perturb setting ok 4 a430 - Create SFQ with quantum setting ok 5 4539 - Create SFQ with divisor setting ok 6 b089 - Create SFQ with flows setting ok 7 99a0 - Create SFQ with depth setting ok 8 7389 - Create SFQ with headdrop setting ok 9 6472 - Create SFQ with redflowlimit setting ok 10 8929 - Show SFQ class ./tdc.py -c skbprio ok 1 283e - Create skbprio with default setting ok 2 c086 - Create skbprio with limit setting ok 3 6733 - Change skbprio with limit setting ok 4 2958 - Show skbprio class ./tdc.py -c taprio ok 1 ba39 - Add taprio Qdisc to multi-queue device (8 queues) ok 2 9462 - Add taprio Qdisc with multiple sched-entry ok 3 8d92 - Add taprio Qdisc with txtime-delay ok 4 d092 - Delete taprio Qdisc with valid handle ok 5 8471 - Show taprio class ok 6 0a85 - Add taprio Qdisc to single-queue device ./tdc.py -c tbf ok 1 6430 - Create TBF with default setting ok 2 0518 - Create TBF with mtu setting ok 3 320a - Create TBF with peakrate setting ok 4 239b - Create TBF with latency setting ok 5 c975 - Create TBF with overhead setting ok 6 948c - Create TBF with linklayer setting ok 7 3549 - Replace TBF with mtu ok 8 f948 - Change TBF with latency time ok 9 2348 - Show TBF class ./tdc.py -c teql ok 1 84a0 - Create TEQL with default setting ok 2 7734 - Create TEQL with multiple device ok 3 34a9 - Delete TEQL with valid handle ok 4 6289 - Show TEQL stats --- v3: add config v2: modify subject prefix ==================== Signed-off-by: -
Zhengchao Shao authored
Test 84a0: Create TEQL with default setting Test 7734: Create TEQL with multiple device Test 34a9: Delete TEQL with valid handle Test 6289: Show TEQL stats Signed-off-by:
-
Zhengchao Shao authored
Test 6430: Create TBF with default setting Test 0518: Create TBF with mtu setting Test 320a: Create TBF with peakrate setting Test 239b: Create TBF with latency setting Test c975: Create TBF with overhead setting Test 948c: Create TBF with linklayer setting Test 3549: Replace TBF with mtu Test f948: Change TBF with latency time Test 2348: Show TBF class Signed-off-by:
-
Zhengchao Shao authored
Test ba39: Add taprio Qdisc to multi-queue device (8 queues) Test 9462: Add taprio Qdisc with multiple sched-entry Test 8d92: Add taprio Qdisc with txtime-delay Test d092: Delete taprio Qdisc with valid handle Test 8471: Show taprio class Test 0a85: Add taprio Qdisc to single-queue device Signed-off-by:
-
Zhengchao Shao authored
Test 283e: Create skbprio with default setting Test c086: Create skbprio with limit setting Test 6733: Change skbprio with limit setting Test 2958: Show skbprio class Signed-off-by:
-
Zhengchao Shao authored
Test 7482: Create SFQ with default setting Test c186: Create SFQ with limit setting Test ae23: Create SFQ with perturb setting Test a430: Create SFQ with quantum setting Test 4539: Create SFQ with divisor setting Test b089: Create SFQ with flows setting Test 99a0: Create SFQ with depth setting Test 7389: Create SFQ with headdrop setting Test 6472: Create SFQ with redflowlimit setting Test 8929: Show SFQ class Signed-off-by:
-
Zhengchao Shao authored
Test 3294: Create SFB with default setting Test 430a: Create SFB with rehash setting Test 3410: Create SFB with db setting Test 49a0: Create SFB with limit setting Test 1241: Create SFB with max setting Test 3249: Create SFB with target setting Test 30a9: Create SFB with increment setting Test 239a: Create SFB with decrement setting Test 9301: Create SFB with penalty_rate setting Test 2a01: Create SFB with penalty_burst setting Test 3209: Change SFB with rehash setting Test 5447: Show SFB class Signed-off-by:
-
Zhengchao Shao authored
Test 3289: Create PLUG with default setting Test 0917: Create PLUG with block setting Test 483b: Create PLUG with release setting Test 4995: Create PLUG with release_indefinite setting Test 389c: Create PLUG with limit setting Test 384a: Delete PLUG with valid handle Test 439a: Replace PLUG with limit setting Test 9831: Change PLUG with limit setting Signed-off-by:
-
Zhengchao Shao authored
Test 900c: Create pfifo_fast with default setting Test 7470: Dump pfifo_fast stats Test b974: Replace pfifo_fast with different handle Test 3240: Delete pfifo_fast with valid handle Test 4385: Delete pfifo_fast with invalid handle Signed-off-by:
-
Zhengchao Shao authored
Test 4812: Create HHF with default setting Test 8a92: Create HHF with limit setting Test 3491: Create HHF with quantum setting Test ba04: Create HHF with reset_timeout setting Test 4238: Create HHF with admit_bytes setting Test 839f: Create HHF with evict_timeout setting Test a044: Create HHF with non_hh_weight setting Test 32f9: Change HHF with limit setting Test 385e: Show HHF class Signed-off-by:
-
Zhengchao Shao authored
Test 8942: Create GRED with default setting Test 5783: Create GRED with grio setting Test 8a09: Create GRED with limit setting Test 48cb: Create GRED with ecn setting Test 763a: Change GRED setting Test 8309: Show GRED class Signed-off-by:
-
Zhengchao Shao authored
Test 983b: Create FQ with default setting Test 38a1: Create FQ with limit packet setting Test 0a18: Create FQ with flow_limit setting Test 2390: Create FQ with quantum setting Test 845b: Create FQ with initial_quantum setting Test 9398: Create FQ with maxrate setting Test 342c: Create FQ with nopacing setting Test 6391: Create FQ with refill_delay setting Test 238b: Create FQ with low_rate_threshold setting Test 7582: Create FQ with orphan_mask setting Test 4894: Create FQ with timer_slack setting Test 324c: Create FQ with ce_threshold setting Test 424a: Create FQ with horizon time setting Test 89e1: Create FQ with horizon_cap setting Test 32e1: Delete FQ with valid handle Test 49b0: Replace FQ with limit setting Test 9478: Change FQ with limit setting Signed-off-by:
-
Zhengchao Shao authored
Test 34ba: Create ETF with default setting Test 438f: Create ETF with delta nanos setting Test 9041: Create ETF with deadline_mode setting Test 9a0c: Create ETF with skip_sock_check setting Test 2093: Delete ETF with valid handle Signed-off-by:
-
