- 06 Jan, 2021 15 commits
-
-
Phil Elwell authored
MMU exception conditions are reported in the V3D_MMU_CTRL register as write-1-to-clear (W1C) bits. The MMU interrupt handling code clears any exceptions, but does so by masking out any other bits and writing the result back. There are some important control bits in that register, including MMU_ENABLE, so a safer approach is to simply write back the value just read unaltered. Signed-off-by:
Phil Elwell <phil@raspberrypi.org> Signed-off-by:
Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by:
Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/1608755714-18233-4-git-send-email-stefan.wahren@i2se.com
-
Phil Elwell authored
Both coherent_dma_mask and dma_mask act as constraints on allocations and bounce buffer usage, so be sure to set dma_mask to the appropriate value otherwise the effective mask could be incorrect. Signed-off-by:
-
Nicolas Saenz Julienne authored
Aside from being more correct, the non optional version of the function prints an error when failing to find the IRQ. Signed-off-by:
-
Thomas Zimmermann authored
Using struct drm_device.pdev is deprecated. Convert vmwgfx to struct drm_device.dev. No functional changes. Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by:
Zack Rusin <zackr@vmware.com> Acked-by:
Sam Ravnborg <sam@ravnborg.org> Cc: Roland Scheidegger <sroland@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201201103542.2182-20-tzimmermann@suse.de
-
Thomas Zimmermann authored
Using struct drm_device.pdev is deprecated. Convert virtgpu to struct drm_device.dev. No functional changes. Signed-off-by:
Gerd Hoffmann <kraxel@redhat.com> Acked-by:
-
Thomas Zimmermann authored
Using struct drm_device.pdev is deprecated. Convert vboxvideo to struct drm_device.dev. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Using struct drm_device.pdev is deprecated. Convert radeon to struct drm_device.dev. No functional changes. Signed-off-by:
Christian König <christian.koenig@amd.com> Acked-by:
Alex Deucher <alexander.deucher@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201201103542.2182-17-tzimmermann@suse.de
-
Thomas Zimmermann authored
Adhere to kernel coding style. Signed-off-by:
-
Thomas Zimmermann authored
Using struct drm_device.pdev is deprecated. Convert qxl to struct drm_device.dev. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Using struct drm_device.pdev is deprecated. Convert mgag200 to struct drm_device.dev. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Using struct drm_device.pdev is deprecated. Convert gma500 to struct drm_device.dev. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Adhere to kernel coding style. Signed-off-by:
-
Thomas Zimmermann authored
Using struct drm_device.pdev is deprecated. Convert cirrus to struct drm_device.dev. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Using struct drm_device.pdev is deprecated. Convert bochs to struct drm_device.dev. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Using struct drm_device.pdev is deprecated. Convert ast to struct drm_device.dev. No functional changes. Signed-off-by:
-
- 05 Jan, 2021 3 commits
-
-
Simon Ser authored
It doesn't seem like drm.h docs are included anywhere. Render them next to drm_mode.h, under the "Userspace API Structures" section. This also allows references to e.g. DRM_CAP_* to be properly linkified elsewhere in our docs. Signed-off-by:
Simon Ser <contact@emersion.fr> Acked-by:
Daniel Vetter <daniel@ffwll.ch> Cc: Pekka Paalanen <ppaalanen@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201222133524.160842-6-contact@emersion.fr
-
Simon Ser authored
Sphinx doesn't like old doc-comments in drm.h and generates warnings like: ./include/uapi/drm/drm.h:87: warning: cannot understand function prototype: 'struct drm_clip_rect ' ./include/uapi/drm/drm.h:97: warning: cannot understand function prototype: 'struct drm_drawable_info ' ./include/uapi/drm/drm.h:105: warning: cannot understand function prototype: 'struct drm_tex_region ' ... Demote these to regular comments, because converting all of them is quite a lot of work (also requires documenting all of the struct fields for instance). Also many of these structures aren't really used by modern user-space. We can easily convert these remaining old comments to Sphinx style on a one-by-one basis. Signed-off-by: -
Simon Ser authored
Our documentation build system chokes on \file comments: ./include/uapi/drm/drm.h:2: warning: Cannot understand * \file drm.h on line 2 - I thought it was a doc line Remove all of the slash-directives, and demote to a normal comment. Keep the historical information because it predates Git. v3: keep the comment (Daniel) Signed-off-by:
-
- 04 Jan, 2021 1 commit
-
-
Simon Ser authored
A driver must not set drm_crtc.cursor and any of the legacy funcs at the same time, otherwise it's not clear which one DRM core should use for legacy cursor updates. Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20201222134002.161613-1-contact@emersion.fr
-
- 30 Dec, 2020 2 commits
-
-
Linus Walleij authored
The "max-brightness" is a standard backlight property that we need to support for the Samsung GT-I8190 Golden because the display will go black if we crank up the brightness too high. As the platform needs this ability to give picture this is a regression fix along with the addition of the property to the GT-I8190 device tree. Cc: Stephan Gerhold <stephan@gerhold.net> Fixes: 9c3f0a0d ("drm/panel: s6e63m0: Implement 28 backlight levels") Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Reviewed-by:
-
Tian Tao authored
Remove including <linux/version.h> that don't need it. Signed-off-by:
Tian Tao <tiantao6@hisilicon.com> Signed-off-by:
-
- 23 Dec, 2020 2 commits
-
-
Tian Tao authored
Hibmc use the devm_drm_dev_alloc function in hibmc_pci_probe, if hibmc_pci_probe returns non-zero, devm_drm_dev_alloc will call devm_drm_dev_init, which will call devm_drm_dev_init_release to release drm_dev_put. There is no need for hibmc to call drm_dev_put separately. Signed-off-by:
-
Tian Tao authored
Using the managed function simplifies the error handling. After unloading the driver, the PCI device should now get disabled as well. Signed-off-by:
-
- 22 Dec, 2020 4 commits
-
-
Chia-I Wu authored
They trigger the BUG_ON() in drm_gem_private_object_init otherwise. Signed-off-by:
Chia-I Wu <olvaffe@gmail.com> Link: http://patchwork.freedesktop.org/patch/msgid/20201219031959.92932-1-olvaffe@gmail.com Cc: Gurchetan Singh <gurchetansingh@chromium.org> Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by:
-
Tian Tao authored
Use flexible-array member introduced in C99 instead of zero-length array. Most of zero-length array was already taken care in previous patch [1]. Now modified few more cases which were not handled earlier. [1]. https://patchwork.kernel.org/patch/11394197/Signed-off-by:
-
Enrico Weigelt, metux IT consult authored
VIRTIO itself has no dependencies and therefore can easily be just select'ed, instead of depending on it. The current depends on causes any others trying to select VIRTIO to fail like this: drivers/gpu/drm/Kconfig:74:error: recursive dependency detected! drivers/gpu/drm/Kconfig:74: symbol DRM_KMS_HELPER is selected by DRM_VIRTIO_GPU drivers/gpu/drm/virtio/Kconfig:2: symbol DRM_VIRTIO_GPU depends on VIRTIO drivers/virtio/Kconfig:2: symbol VIRTIO is selected by GPIO_VIRTIO drivers/gpio/Kconfig:1618: symbol GPIO_VIRTIO depends on GPIOLIB drivers/gpio/Kconfig:14: symbol GPIOLIB is selected by I2C_MUX_LTC4306 drivers/i2c/muxes/Kconfig:47: symbol I2C_MUX_LTC4306 depends on I2C drivers/i2c/Kconfig:8: symbol I2C is selected by FB_DDC drivers/video/fbdev/Kconfig:63: symbol FB_DDC depends on FB drivers/video/fbdev/Kconfig:12: symbol FB is selected by DRM_KMS_FB_HELPER drivers/gpu/drm/Kconfig:80: symbol DRM_KMS_FB_HELPER depends on DRM_KMS_HELPER It seems that having both 'depends on' as well as 'select' on the same symbol sends us into big trouble, and Kconfig can't break up the circular dependency (note that in the tested configuration, neither I2C, FB or DRM are enabled at all). Perhaps we could consider this a bug in Kconfig, but the trouble can easily be circumvented by changing 'depends on' into 'select'. DRM_VIRTIO_GPU also depends on VIRTIO_MENU, so even after this change, that option will only show up if the user already enabled virtio in the config. This change didn't cause any changes in the .config after menuconfig run, so we should be completely safe here. Signed-off-by:
Enrico Weigelt, metux IT consult <info@metux.net> Reviewed-by:
Anthoine Bourgeois <anthoine.bourgeois@gmail.com> Link: http://patchwork.freedesktop.org/patch/msgid/20201204131221.2827-1-info@metux.netSigned-off-by:
-
Daniel Vetter authored
I tried to fix this for real, but it's very sprawling and lots of drivers get this mildly wrong one way or the other. Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Acked-by:
-
- 17 Dec, 2020 10 commits
-
-
Simon Ser authored
Document that enabling atomic also enables universal planes and aspect ratio modes. Signed-off-by:
-
Simon Ser authored
User-space expects to be able to pick a primary plane for each CRTC exposed by the driver. Make sure this assumption holds in drm_mode_config_validate. Use the legacy drm_crtc.primary field to check this, because it's simpler and we require drivers to set it anyways. Accumulate a set of primary planes which are already used for a CRTC in a bitmask. Error out if a primary plane is re-used. v2: new patch v3: - Use u64 instead of __u64 (Jani) - Use `unsigned int` instead of `unsigned` (Jani) v4: - Use u32 instead of u64 for plane mask (Ville) - Use drm_plane_mask instead of BIT (Ville) - Fix typos (Ville) Signed-off-by:
Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Pekka Paalanen <ppaalanen@gmail.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201211184634.74534-4-contact@emersion.fr
-
Simon Ser authored
The documentation build system recognizes "struct XXX" references and generates links for them. Signed-off-by:
-
Simon Ser authored
Introduce a new "Standard Plane Properties" section for properties defined in drm_plane.c. Move the mis-placed IN_FORMATS docs there. Signed-off-by:
-
Simon Ser authored
State that the "KMS Properties" section is mainly for user-space developers. Signed-off-by:
-
Simon Ser authored
Move drm_color_mgmt function reference from the KMS properties section to the CRTC abstraction section. This makes the KMS properties section more readable for user-space developers. Signed-off-by:
-
Simon Ser authored
Move drm_damage_helper function reference from the KMS properties section to the plane abstraction section. This makes the KMS properties section more readable for user-space developers. Signed-off-by:
-
Simon Ser authored
Move drm_blend.c function reference from the KMS properties section to the plane abstraction section. This makes the KMS properties section more readable for user-space developers. Signed-off-by:
-
Simon Ser authored
Make it more human-readable. Signed-off-by:
-
Tomi Valkeinen authored
Update the maintainer email addresses for TI display drivers. Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by:
Jyri Sarha <jyri.sarha@iki.fi> Acked-by:
-
- 16 Dec, 2020 3 commits
-
-
Daniel Vetter authored
Motivated by a discussion with Christian and Thomas: Try to untangle a bit what's relevant for importers and what's relevant for exporters. Also add an assert that really only dynamic importers use the api function, anything else doesn't make sense. Acked-by:
-
Daniel Vetter authored
At least amdgpu and i915 do, so lets just document this as the rule. v2: Works better with less typos (intel-gfx-ci) Reviewed-by:
-
Daniel Vetter authored
Noticed while reviewing the output. Adds a bunch more links and fixes the function interface quoting. Acked-by:
-
