Provide a splice_read wrapper for XFS.  This does a stat count and a
shutdown check before proceeding, then emits a new trace line and locks the
inode across the call to filemap_splice_read() and adds to the stats
afterwards.  Splicing from direct I/O or DAX is handled by the caller.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: Jens Axboe <axboe@kernel.dk>
cc: Darrick J. Wong <djwong@kernel.org>
cc: linux-xfs@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
cc: linux-block@vger.kernel.org
cc: linux-mm@kvack.org
Link: https://lore.kernel.org/r/20230522135018.2742245-25-dhowells@redhat.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Provide a splice_read wrapper for ocfs2.  This increments the read stats
and then locks the inode across the call to filemap_splice_read() and a
revalidation of the mapping.  Splicing from direct I/O is done by the
caller.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Christoph Hellwig <hch@lst.de>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: Jens Axboe <axboe@kernel.dk>
cc: Mike Marshall <hubcap@omnibond.com>
cc: Martin Brandenburg <martin@omnibond.com>
cc: devel@lists.orangefs.org
cc: linux-fsdevel@vger.kernel.org
cc: linux-block@vger.kernel.org
cc: linux-mm@kvack.org
Link: https://lore.kernel.org/r/20230522135018.2742245-24-dhowells@redhat.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Provide a splice_read wrapper for ocfs2.  This emits trace lines and does
an atime lock/update before calling filemap_splice_read().  Splicing from
direct I/O is handled by the caller.

A couple of new tracepoints are added for this purpose.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
cc: Christoph Hellwig <hch@lst.de>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: Jens Axboe <axboe@kernel.dk>
cc: Mark Fasheh <mark@fasheh.com>
cc: Joel Becker <jlbec@evilplan.org>
cc: ocfs2-devel@oss.oracle.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-block@vger.kernel.org
cc: linux-mm@kvack.org
Link: https://lore.kernel.org/r/20230522135018.2742245-23-dhowells@redhat.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Provide a splice_read wrapper for NTFS3 to perform various checks before
allowing the operation to proceed.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Christoph Hellwig <hch@lst.de>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: Jens Axboe <axboe@kernel.dk>
cc: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
cc: ntfs3@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
cc: linux-block@vger.kernel.org
cc: linux-mm@kvack.org
Link: https://lore.kernel.org/r/20230522135018.2742245-22-dhowells@redhat.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Provide a splice_read wrapper for NFS.  This locks the inode around
filemap_splice_read() and revalidates the mapping.  Splicing from direct
I/O is handled by the caller.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Christoph Hellwig <hch@lst.de>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: Jens Axboe <axboe@kernel.dk>
cc: Trond Myklebust <trond.myklebust@hammerspace.com>
cc: Anna Schumaker <anna@kernel.org>
cc: linux-nfs@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
cc: linux-block@vger.kernel.org
cc: linux-mm@kvack.org
Link: https://lore.kernel.org/r/20230522135018.2742245-21-dhowells@redhat.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Provide a splice_read wrapper for f2fs.  This does some checks and tracing
before calling filemap_splice_read() and will update the iostats
afterwards.  Direct I/O is handled by the caller.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Christoph Hellwig <hch@lst.de>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: Jens Axboe <axboe@kernel.dk>
cc: Jaegeuk Kim <jaegeuk@kernel.org>
cc: Chao Yu <chao@kernel.org>
cc: linux-f2fs-devel@lists.sourceforge.net
cc: linux-fsdevel@vger.kernel.org
cc: linux-block@vger.kernel.org
cc: linux-mm@kvack.org
Link: https://lore.kernel.org/r/20230522135018.2742245-20-dhowells@redhat.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Provide a splice_read wrapper for Ext4.  This does the inode shutdown check
before proceeding.  Splicing from DAX files and O_DIRECT fds is handled by
the caller.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Theodore Ts'o <tytso@mit.edu>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: Jens Axboe <axboe@kernel.dk>
cc: Andreas Dilger <adilger.kernel@dilger.ca>
cc: linux-ext4@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
cc: linux-block@vger.kernel.org
cc: linux-mm@kvack.org
Link: https://lore.kernel.org/r/20230522135018.2742245-19-dhowells@redhat.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Provide a splice_read wrapper for ecryptfs to update the access time on the
lower file after the operation.  Splicing from a direct I/O fd will update
the access time when ->read_iter() is called.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Christoph Hellwig <hch@lst.de>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: Jens Axboe <axboe@kernel.dk>
cc: Tyler Hicks <code@tyhicks.com>
cc: ecryptfs@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
cc: linux-block@vger.kernel.org
cc: linux-mm@kvack.org
Link: https://lore.kernel.org/r/20230522135018.2742245-18-dhowells@redhat.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Provide a splice_read wrapper for Ceph.  This does the inode shutdown check
before proceeding and jumps to copy_splice_read() if the file has inline
data or is a synchronous file.

We try and get FILE_RD and either FILE_CACHE and/or FILE_LAZYIO caps and
hold them across filemap_splice_read().  If we fail to get FILE_CACHE or
FILE_LAZYIO capabilities, we use copy_splice_read() instead.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
cc: Christoph Hellwig <hch@lst.de>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: Jens Axboe <axboe@kernel.dk>
cc: Ilya Dryomov <idryomov@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: ceph-devel@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
cc: linux-block@vger.kernel.org
cc: linux-mm@kvack.org
Link: https://lore.kernel.org/r/20230522135018.2742245-17-dhowells@redhat.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Provide a splice_read wrapper for AFS to call afs_validate() before going
into generic_file_splice_read() so that we're likely to have a callback
promise from the server.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Christoph Hellwig <hch@lst.de>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: Jens Axboe <axboe@kernel.dk>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-fsdevel@vger.kernel.org
cc: linux-block@vger.kernel.org
cc: linux-mm@kvack.org
Link: https://lore.kernel.org/r/20230522135018.2742245-16-dhowells@redhat.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Add a splice_read wrapper for 9p.  We should use copy_splice_read() if
9PL_DIRECT is set and filemap_splice_read() otherwise.  Note that this
doesn't seem to be particularly related to O_DIRECT.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Christoph Hellwig <hch@lst.de>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: Jens Axboe <axboe@kernel.dk>
cc: Dominique Martinet <asmadeus@codewreck.org>
cc: Eric Van Hensbergen <ericvh@kernel.org>
cc: Latchesar Ionkov <lucho@ionkov.net>
cc: Christian Schoenebeck <linux_oss@crudebyte.com>
cc: v9fs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
cc: linux-block@vger.kernel.org
cc: linux-mm@kvack.org
Link: https://lore.kernel.org/r/20230522135018.2742245-15-dhowells@redhat.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Make sock_splice_read() use copy_splice_read() by default as
file_splice_read() will return immediately with 0 as a socket has no
pagecache and is a zero-size file.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: Christoph Hellwig <hch@lst.de>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: Jens Axboe <axboe@kernel.dk>
cc: netdev@vger.kernel.org
cc: linux-block@vger.kernel.org
cc: linux-mm@kvack.org
Link: https://lore.kernel.org/r/20230522135018.2742245-14-dhowells@redhat.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Use copy_splice_read() for tty, procfs, kernfs and random files rather
than going through generic_file_splice_read() as they just copy the file
into the output buffer and don't splice pages.  This avoids the need for
them to have a ->read_folio() to satisfy filemap_splice_read().
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
cc: Christoph Hellwig <hch@lst.de>
cc: Jens Axboe <axboe@kernel.dk>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: John Hubbard <jhubbard@nvidia.com>
cc: David Hildenbrand <david@redhat.com>
cc: Matthew Wilcox <willy@infradead.org>
cc: Miklos Szeredi <miklos@szeredi.hu>
cc: Arnd Bergmann <arnd@arndb.de>
cc: linux-block@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
Link: https://lore.kernel.org/r/20230522135018.2742245-13-dhowells@redhat.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Implement splice-read for coda by passing the request down a layer rather
than going through generic_file_splice_read() which is going to be changed
to assume that ->read_folio() is present on buffered files.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Jan Harkes <jaharkes@cs.cmu.edu>
cc: Christoph Hellwig <hch@lst.de>
cc: Jens Axboe <axboe@kernel.dk>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: John Hubbard <jhubbard@nvidia.com>
cc: David Hildenbrand <david@redhat.com>
cc: Matthew Wilcox <willy@infradead.org>
cc: coda@cs.cmu.edu
cc: codalist@coda.cs.cmu.edu
cc: linux-unionfs@vger.kernel.org
cc: linux-block@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
Link: https://lore.kernel.org/r/20230522135018.2742245-12-dhowells@redhat.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Implement splice-read for overlayfs by passing the request down a layer
rather than going through generic_file_splice_read() which is going to be
changed to assume that ->read_folio() is present on buffered files.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Christian Brauner <brauner@kernel.org>
cc: Christoph Hellwig <hch@lst.de>
cc: Jens Axboe <axboe@kernel.dk>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: John Hubbard <jhubbard@nvidia.com>
cc: David Hildenbrand <david@redhat.com>
cc: Matthew Wilcox <willy@infradead.org>
cc: Miklos Szeredi <miklos@szeredi.hu>
cc: Amir Goldstein <amir73il@gmail.com>
cc: linux-unionfs@vger.kernel.org
cc: linux-block@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
Link: https://lore.kernel.org/r/20230522135018.2742245-11-dhowells@redhat.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

The new filemap_splice_read() has an implicit expectation via
filemap_get_pages() that ->read_folio() exists if ->readahead() doesn't
fully populate the pagecache of the file it is reading from[1], potentially
leading to a jump to NULL if this doesn't exist.  shmem, however, (and by
extension, tmpfs, ramfs and rootfs), doesn't have ->read_folio(),

Work around this by equipping shmem with its own splice-read
implementation, based on filemap_splice_read(), but able to paste in
zero_page when there's a page missing.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Daniel Golle <daniel@makrotopia.org>
cc: Guenter Roeck <groeck7@gmail.com>
cc: Christoph Hellwig <hch@lst.de>
cc: Jens Axboe <axboe@kernel.dk>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: John Hubbard <jhubbard@nvidia.com>
cc: David Hildenbrand <david@redhat.com>
cc: Matthew Wilcox <willy@infradead.org>
cc: Hugh Dickins <hughd@google.com>
cc: linux-block@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
Link: https://lore.kernel.org/r/Y+pdHFFTk1TTEBsO@makrotopia.org/ [1]
Link: https://lore.kernel.org/r/20230522135018.2742245-10-dhowells@redhat.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Make a read splice from a DAX file go directly to copy_splice_read() to do
the reading as filemap_splice_read() is unlikely to find any pagecache to
splice.

I think this affects only erofs, Ext2, Ext4, fuse and XFS.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: Jens Axboe <axboe@kernel.dk>
cc: linux-erofs@lists.ozlabs.org
cc: linux-ext4@vger.kernel.org
cc: linux-xfs@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
cc: linux-block@vger.kernel.org
cc: linux-mm@kvack.org
Link: https://lore.kernel.org/r/20230522135018.2742245-9-dhowells@redhat.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Make a read splice from a file descriptor that's open O_DIRECT use
copy_splice_read() to do the reading as filemap_splice_read() is unlikely
to find any pagecache to splice.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: Jens Axboe <axboe@kernel.dk>
cc: linux-fsdevel@vger.kernel.org
cc: linux-block@vger.kernel.org
cc: linux-mm@kvack.org
Link: https://lore.kernel.org/r/20230522135018.2742245-8-dhowells@redhat.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Make vfs_splice_read() return immediately if the length is 0.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
cc: Jens Axboe <axboe@kernel.dk>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: linux-block@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
Link: https://lore.kernel.org/r/20230522135018.2742245-7-dhowells@redhat.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Rename do_splice_to() to vfs_splice_read() and export it so that it can be
used as a helper when calling down to a lower layer filesystem as it
performs all the necessary checks[1].
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
cc: Miklos Szeredi <miklos@szeredi.hu>
cc: Jens Axboe <axboe@kernel.dk>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: John Hubbard <jhubbard@nvidia.com>
cc: David Hildenbrand <david@redhat.com>
cc: Matthew Wilcox <willy@infradead.org>
cc: linux-unionfs@vger.kernel.org
cc: linux-block@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
Link: https://lore.kernel.org/r/CAJfpeguGksS3sCigmRi9hJdUec8qtM9f+_9jC1rJhsXT+dV01w@mail.gmail.com/ [1]
Link: https://lore.kernel.org/r/20230522135018.2742245-6-dhowells@redhat.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Do a couple of cleanups to copy_splice_read():

 (1) Cast to struct page **, not void *.

 (2) Simplify the calculation of the number of pages to keep/reclaim in
     copy_splice_read().
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
cc: Jens Axboe <axboe@kernel.dk>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: David Hildenbrand <david@redhat.com>
cc: John Hubbard <jhubbard@nvidia.com>
cc: linux-mm@kvack.org
cc: linux-block@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20230522135018.2742245-5-dhowells@redhat.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Rename direct_splice_read() to copy_splice_read() to better reflect as to
what it does.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
cc: Steve French <sfrench@samba.org>
cc: Jens Axboe <axboe@kernel.dk>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: linux-cifs@vger.kernel.org
cc: linux-mm@kvack.org
cc: linux-block@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20230522135018.2742245-4-dhowells@redhat.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Make filemap_splice_read() check s_maxbytes analogously to filemap_read().
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
cc: Steve French <stfrench@microsoft.com>
cc: Jens Axboe <axboe@kernel.dk>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: David Hildenbrand <david@redhat.com>
cc: John Hubbard <jhubbard@nvidia.com>
cc: linux-mm@kvack.org
cc: linux-block@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20230522135018.2742245-3-dhowells@redhat.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Fix filemap_splice_read() to use file->f_mapping->host, not file->f_inode,
as the source of the file size because in the case of a block device,
file->f_inode points to the block-special file (which is typically 0
length) and not the backing store.

Fixes: 07073eb0 ("splice: Add a func to do a splice from a buffered file without ITER_PIPE")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
cc: Steve French <stfrench@microsoft.com>
cc: Jens Axboe <axboe@kernel.dk>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: David Hildenbrand <david@redhat.com>
cc: John Hubbard <jhubbard@nvidia.com>
cc: linux-mm@kvack.org
cc: linux-block@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20230522135018.2742245-2-dhowells@redhat.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Pull compute express link fixes from Dan Williams:

 - Fix a compilation issue with DEFINE_STATIC_SRCU() in the unit tests

 - Fix leaking kernel memory to a root-only sysfs attribute

* tag 'cxl-fixes-6.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
  cxl: Add missing return to cdat read error path
  tools/testing/cxl: Use DEFINE_STATIC_SRCU()

Pull parisc architecture fixes from Helge Deller:

 - Fix encoding of swp_entry due to added SWP_EXCLUSIVE flag

 - Include reboot.h to avoid gcc-12 compiler warning

* tag 'parisc-for-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Fix encoding of swp_entry due to added SWP_EXCLUSIVE flag
  parisc: kexec: include reboot.h

Pull ARM fixes from Russell King:

 - fix unwinder for uleb128 case

 - fix kernel-doc warnings for HP Jornada 7xx

 - fix unbalanced stack on vfp success path

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 9297/1: vfp: avoid unbalanced stack on 'success' return path
  ARM: 9296/1: HP Jornada 7XX: fix kernel-doc warnings
  ARM: 9295/1: unwind:fix unwind abort for uleb128 case

Pull locking fix from Borislav Petkov:

 - Make sure __down_read_common() is always inlined so that the callers'
   names land in traceevents output and thus the blocked function can be
   identified

* tag 'locking_urgent_for_v6.4_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/rwsem: Add __always_inline annotation to __down_read_common() and inlined callers

Pull perf fixes from Borislav Petkov:

 - Make sure the PEBS buffer is flushed before reprogramming the
   hardware so that the correct record sizes are used

 - Update the sample size for AMD BRS events

 - Fix a confusion with using the same on-stack struct with different
   events in the event processing path

* tag 'perf_urgent_for_v6.4_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel/ds: Flush PEBS DS when changing PEBS_DATA_CFG
  perf/x86: Fix missing sample size update on AMD BRS
  perf/core: Fix perf_sample_data not properly initialized for different swevents in perf_tp_event()

Pull scheduler fix from Borislav Petkov:

 - Fix a couple of kernel-doc warnings

* tag 'sched_urgent_for_v6.4_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched: fix cid_lock kernel-doc warnings

Pull x86 fix from Borislav Petkov:

 - Add the required PCI IDs so that the generic SMN accesses provided by
   amd_nb.c work for drivers which switch to them. Add a PCI device ID
   to k10temp's table so that latter is loaded on such systems too

* tag 'x86_urgent_for_v6.4_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  hwmon: (k10temp) Add PCI ID for family 19, model 78h
  x86/amd_nb: Add PCI ID for family 19h model 78h

Pull timer fix from Borislav Petkov:

 - Prevent CPU state corruption when an active clockevent broadcast
   device is replaced while the system is already in oneshot mode

* tag 'timers_urgent_for_v6.4_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tick/broadcast: Make broadcast device replacement work correctly

Pull ext4 fixes from Ted Ts'o:
 "Some ext4 bug fixes (mostly to address Syzbot reports)"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: bail out of ext4_xattr_ibody_get() fails for any reason
  ext4: add bounds checking in get_max_inline_xattr_value_size()
  ext4: add indication of ro vs r/w mounts in the mount message
  ext4: fix deadlock when converting an inline directory in nojournal mode
  ext4: improve error recovery code paths in __ext4_remount()
  ext4: improve error handling from ext4_dirhash()
  ext4: don't clear SB_RDONLY when remounting r/w until quota is re-enabled
  ext4: check iomap type only if ext4_iomap_begin() does not fail
  ext4: avoid a potential slab-out-of-bounds in ext4_group_desc_csum
  ext4: fix data races when using cached status extents
  ext4: avoid deadlock in fs reclaim with page writeback
  ext4: fix invalid free tracking in ext4_xattr_move_to_block()
  ext4: remove a BUG_ON in ext4_mb_release_group_pa()
  ext4: allow ext4_get_group_info() to fail
  ext4: fix lockdep warning when enabling MMP
  ext4: fix WARNING in mb_find_extent

Pull fbdev fixes from Helge Deller:

 - use after free fix in imsttfb (Zheng Wang)

 - fix error handling in arcfb (Zongjie Li)

 - lots of whitespace cleanups (Thomas Zimmermann)

 - add 1920x1080 modedb entry (me)

* tag 'fbdev-for-6.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
  fbdev: stifb: Fix info entry in sti_struct on error path
  fbdev: modedb: Add 1920x1080 at 60 Hz video mode
  fbdev: imsttfb: Fix use after free bug in imsttfb_probe
  fbdev: vfb: Remove trailing whitespaces
  fbdev: valkyriefb: Remove trailing whitespaces
  fbdev: stifb: Remove trailing whitespaces
  fbdev: sa1100fb: Remove trailing whitespaces
  fbdev: platinumfb: Remove trailing whitespaces
  fbdev: p9100: Remove trailing whitespaces
  fbdev: maxinefb: Remove trailing whitespaces
  fbdev: macfb: Remove trailing whitespaces
  fbdev: hpfb: Remove trailing whitespaces
  fbdev: hgafb: Remove trailing whitespaces
  fbdev: g364fb: Remove trailing whitespaces
  fbdev: controlfb: Remove trailing whitespaces
  fbdev: cg14: Remove trailing whitespaces
  fbdev: atmel_lcdfb: Remove trailing whitespaces
  fbdev: 68328fb: Remove trailing whitespaces
  fbdev: arcfb: Fix error handling in arcfb_probe()

Pull SCSI fix from James Bottomley:
 "A single small fix for the UFS driver to fix a power management
  failure"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: ufs: core: Fix I/O hang that occurs when BKOPS fails in W-LUN suspend

Fix the __swp_offset() and __swp_entry() macros due to commit 6d239fc7
("parisc/mm: support __HAVE_ARCH_PTE_SWP_EXCLUSIVE") which introduced the
SWP_EXCLUSIVE flag by reusing the _PAGE_ACCESSED flag.
Reported-by: Christoph Biedl <linux-kernel.bfrz@manchmal.in-ulm.de>
Tested-by: Christoph Biedl <linux-kernel.bfrz@manchmal.in-ulm.de>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Fixes: 6d239fc7 ("parisc/mm: support __HAVE_ARCH_PTE_SWP_EXCLUSIVE")
Cc: <stable@vger.kernel.org> # v6.3+

In ext4_update_inline_data(), if ext4_xattr_ibody_get() fails for any
reason, it's best if we just fail as opposed to stumbling on,
especially if the failure is EFSCORRUPTED.

Cc: stable@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

Normally the extended attributes in the inode body would have been
checked when the inode is first opened, but if someone is writing to
the block device while the file system is mounted, it's possible for
the inode table to get corrupted.  Add bounds checking to avoid
reading beyond the end of allocated memory if this happens.

Reported-by: syzbot+1966db24521e5f6e23f7@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=1966db24521e5f6e23f7
Cc: stable@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

Whether the file system is mounted read-only or read/write is more
important than the quota mode, which we are already printing.  Add the
ro vs r/w indication since this can be helpful in debugging problems
from the console log.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>