nomadik_src_init references __initconst sections but lacks an __init
itself. Add __init to fix the section mismatch.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'renesas-cleanup-for-v3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/cleanup

From Simon Horman:
Renesas ARM based SoC cleanups for v3.13

* Constify platform data and resources of r8a7790 SoC
* Rename to r8a7790_init_delay() as r8a7790_init_early()
  - This is in preparation for doing more than just initialising the delay
* Rename r8a73a4_init_delay() as r8a73a4_init_early()
  - This is in preparation for doing more than just initialising the delay

* tag 'renesas-cleanup-for-v3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: r8a7790: Constify platform data and resources
  ARM: shmobile: Rename to r8a7790_init_early()
  ARM: shmobile: Rename to r8a73a4_init_early()
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'renesas-fixes5-for-v3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/cleanup

From Simon Horman:

* Correct incorrect placement of __initdata tag in ape6evm board code

* tag 'renesas-fixes5-for-v3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: ape6evm: fix incorrect placement of __initdata tag
  (+ other patches already present in v3.12-rc4)
Signed-off-by: Olof Johansson <olof@lixom.net>

CLKDEV_LOOKUP selects HAVE_CLK and COMMON_CLK selects CLKDEV_LOOKUP. So
all symbols that select at least two of these symbols can be simplified.

For imx, omap2 and ux500 some rearrangements were necessary before the
simplification.
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Dinh Nguyen <dinguyen@altera.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Pawel Moll <pawel.moll@arm.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Olof Johansson <olof@lixom.net>

From Sebastian Hasselbarth:

This is a patch set based on an RFC [1][2] sent earlier to provide
a common arch/arm init for DT clock providers. Currently, the call to
of_clk_init(NULL) to initialize DT clock providers is spread among several
mach-dirs. Since most machs require DT clocks initialized before timers,
no initcall can be used.

By adding of_clk_init(NULL) to arch/arm time_init(), we can remove all
mach-specific .init_time hooks that basically called of_clk_init and
clocksource_of_init.

In contrast to the RFC version, of_clk_init(NULL) is now only called if
no custom .init_time callback is set. This allows some machs to still
call clock init themselves, as not all can be converted now. Therefore,
this patch sets drops conversion of mach-mvebu and mach-zynq. New machs
that were introduced with v3.12-rc1 are also converted, except mach-u300
that requires clocks before irqs.

* 'clk-of-init-v2_for-3.13' of https://github.com/shesselba/linux-dove: (29 commits)
  ARM: vt8500: remove custom .init_time hook
  ARM: vexpress: remove custom .init_time hook
  ARM: tegra: remove custom .init_time hook
  ARM: sunxi: remove custom .init_time hook
  ARM: sti: remove custom .init_time hook
  ARM: socfpga: remove custom .init_time hook
  ARM: rockchip: remove custom .init_time hook
  ARM: prima2: remove custom .init_time hook
  ARM: nspire: remove custom .init_time hook
  ARM: nomadik: remove custom .init_time hook
  ARM: mxs: remove custom .init_time hook
  ARM: kirkwood: remove custom .init_time hook
  ARM: imx: remove custom .init_time hook
  ARM: highbank: remove custom .init_time hook
  ARM: exynos: remove custom .init_time hook
  ARM: dove: remove custom .init_time hook
  ARM: bcm2835: remove custom .init_time hook
  ARM: bcm: provide common arch init for DT clocks
  ARM: call of_clk_init from default time_init handler
  ARM: vt8500: prepare for arch-wide .init_time callback
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

__initdata tag should be placed between the variable name and equal
sign for the variable to be placed in the intended .init.data section.
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

With arch/arm calling of_clk_init(NULL) from time_init(), we can now
remove custom .init_time hooks.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Tony Prisk <linux@prisktech.co.nz>

With arch/arm calling of_clk_init(NULL) from time_init(), we can now
remove custom .init_time hooks. The call to versatile_sched_clock_init
is moved to .init_early instead, were it is also for non-DT boards.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Tested-by: Jon Medhurst (Tixy) <tixy@linaro.org>
Acked-by: Pawel Moll <pawel.moll@arm.com>

With arch/arm calling of_clk_init(NULL) from time_init(), we can now
remove custom .init_time hooks.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Stephen Warren <swarren@nvidia.com>

With arch/arm calling of_clk_init(NULL) from time_init(), we can now
remove custom .init_time hooks.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>

With arch/arm calling of_clk_init(NULL) from time_init(), we can now
remove custom .init_time hooks. To get rid of it, move l2cc init to
.init_machine hook instead.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>

With arch/arm calling of_clk_init(NULL) from time_init(), we can now
remove custom .init_time hooks.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Dinh Nguyen <dinguyen@altera.com>

With arch/arm calling of_clk_init(NULL) from time_init(), we can now
remove custom .init_time hooks.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>

With arch/arm calling of_clk_init(NULL) from time_init(), we can now
remove custom .init_time hooks.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Barry Song <baohua.song@csr.com>

With arch/arm calling of_clk_init(NULL) from time_init(), we can now
remove custom .init_time hooks.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>

With arch/arm calling of_clk_init(NULL) from time_init(), we can now
remove custom .init_time hooks.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>

This patch converts clk-imx2[38] clocksource_of_init compatible init
associated with fsl,imx2[38]-clkctrl. With arch/arm calling
of_clk_init(NULL) from time_init(), we can now also remove custom
.init_time hooks.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Acked-by: Shawn Guo <shawn.guo@linaro.org>

With arch/arm calling of_clk_init(NULL) from time_init(), we can now
remove custom .init_time hooks.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Jason Cooper <jason@lakedaemon.net>

With arch/arm calling of_clk_init(NULL) from time_init(), we can now
remove custom .init_time hooks.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>

With arch/arm calling of_clk_init(NULL) from time_init(), we can now
remove custom .init_time hooks. Highbank clock provider need a reference
to system registers, as a workaround current clk driver maps those
independent of arch code now.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Mike Turquette <mturquette@linaro.org>

With arch/arm calling of_clk_init(NULL) from time_init(), we can now
remove custom .init_time hooks. While at it, also remove some now
redundant includes.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>

With arch/arm calling of_clk_init(NULL) from time_init(), we can now
remove custom .init_time hooks. While at it, also remove some obsolete
includes.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Jason Cooper <jason@lakedaemon.net>

With arch/arm calling of_clk_init(NULL) from time_init(), we can now
remove custom .init_time hooks. Also remove call to of_clk_init from
clk-bcm2835 with core fixed_clock match, as this has already been
registered now.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Acked-by: Mike Turquette <mturquette@linaro.org>

With arch/arm calling of_clk_init(NULL) and clocksource_of_init()
this is no longer needed. The former is useful because we can make
use of dummy fixed clocks for drivers until the bcm281xx common
clock driver is ready.
Signed-off-by: Matt Porter <matt.porter@linaro.org>
Reviewed-by: Markus Mayer <markus.mayer@linaro.org>
Acked-by: Christian Daudt <csd@broadcom.com>

Most DT ARM machs require common clock providers initialized before timers.
Currently, arch/arm machs use .init_time to call of_clk_init right before
clocksource_of_init. This prevents to remove that callback and use the default
one instead.

This patch adds a call to of_clk_init() to the default .init_time callback
for COMMON_CLK enabled machs to allow to remove custom callbacks where applicable.
While at it, also reorder includes alphabetically.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>

Current vt8500 board init calls of_clk_init() from vtwm_clk_init. To allow
consolidation of DT driven .time_init, move of_clock_init() to a temporary
.time_init callback that will be removed when arch-wide callback is available.
With previous pmc_base parsing helper for vt8500 clock providers, we can also
safely remove the call to vtwm_clk_init() and get rid of some includes.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Tony Prisk <linux@prisktech.co.nz>
Acked-by: Mike Turquette <mturquette@linaro.org>

Currently, clock providers for vt8500 depend on machine_init providing
pmc_base address before calling of_clk_init. With upcoming arch-wide
.time_init calling of_clk_init, we should make clock providers independent
of mach code. This adds a pmc_base parsing helper to current clock provider
that gets called if there is no pmc_base set, yet.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Tony Prisk <linux@prisktech.co.nz>
Acked-by: Mike Turquette <mturquette@linaro.org>

Common clock framework allows to register clock providers to get called
on of_clk_init() by using CLK_OF_DECLARE. This converts sunxi clock
providers to make use of it and get rid of the mach specific clk init
call. As sunxi has a bunch of independent clk provider nodes, we hook
current clock init to board compatible to make it called once.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Mike Turquette <mturquette@linaro.org>

Current socfpga board init calls of_clk_init() from .machine_init. To
allow consolidation of DT driven .time_init, move of_clock_init() to
a temporary .time_init that will be removed when arch-wide callback is
available.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Dinh Nguyen <dinguyen@altera.com>

Common clock framework allows to register clock providers to get called
on of_clk_init() by using CLK_OF_DECLARE. This converts prima2 clock
provider to make use of it and get rid of the mach specific clk init
call.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Barry Song <baohua.song@csr.com>
Acked-by: Mike Turquette <mturquette@linaro.org>

Common clock framework allows to register clock providers to get called
on of_clk_init() by using CLK_OF_DECLARE. This converts nomadik clock
provider to make use of it and get rid of the mach specific clk init
call. As clocks require system reset controller base address to be
initialized each clock driver checks src_base and calls new
nomadik_src_init if required.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Mike Turquette <mturquette@linaro.org>

nomadik_clk_init currently also maps system reset controller base address
used by clocks and registers a reboot notifier. To allow further cleanup of
nomadik clk setup, this moves system reset controller setup from
nomadik_clk_init to its own function.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Mike Turquette <mturquette@linaro.org>

Nomadik clock initialization is properly done in clk-nomadik since
patch "clk: nomadik: set all timers to use 2.4 MHz TIMCLK".
Therefore, this patch removes now redundant mtu initialization from
.init_time callback.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>

Merge tag 'del-shark-for-v3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/cleanup

From Linus Walleij:

This deletes the Shark SA110-based sub-architecture from
the kernel.

* tag 'del-shark-for-v3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
  video: drop code for ARCH_SHARK in cyber2000fb
  input: i8042: drop dependency on ARCH_SHARK
  ide: drop dependency on ARCH_SHARK
  block: drop dependency on ARCH_SHARK
  MAINTAINERS: delete Shark machine entry
  ARM: delete mach-shark
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into next/cleanup

From Linus Walleij:

These three patches tear out the remaining AUXDATA in the
Nomadik platform and replace it with device tree.

Corresponding driver changes are coming from respective
subsystem tree and there are no build dependencies.

- Update device tree for VMMC regulator data
- Supply SD/MMC voltage from the VMMC regulator
- Delete auxdata for SD/MMC card and rely on DT only
- Update device tree for FSMC NAND merged for v3.12-rc1
- Delete auxdata for FSMC NAND

* tag 'for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
  ARM: nomadik: delete FSMC platform data
  ARM: nomadik: delete MMCI platform data
  ARM: nomadik: register VMMC regulator
Signed-off-by: Olof Johansson <olof@lixom.net>

The Cyber2000 frame buffer driver contains a block of code solely
for the Shark machine. As the machine is deleted, delete this
code as well.

Also remove the pointless #ifdef CONFIG_PCI as the Kconfig
clearly states PCI as a dependency anyway.

Cc: Russell King <linux@arm.linux.org.uk>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Delete the configuration option for the Shark machine from
the i8042 Kconfig, as the machine is deleted from the kernel.
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

This drops the selection of default IDE chipset for the Shark
machine as it has been deleted.
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

With this machine deleted, there is no need to maintain the
MFM block driver for its hard disk either.

Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

We now have device tree support for setting the NAND timings
for FSMC from the device tree, so delete the last piece of
platform data and auxdata.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>