The split of /reserved-memory handling between fdt.c and
of_reserved_mem.c makes for reading and restructuring the code
difficult. As of_reserved_mem.c is only built for
CONFIG_OF_EARLY_FLATTREE already, move all the code to one spot.
Acked-by: Saravana Kannan <saravanak@google.com>
Reviewed-by: Oreoluwa Babatunde <quic_obabatun@quicinc.com>
Link: https://lore.kernel.org/r/20240311181303.1516514-2-robh@kernel.orgSigned-off-by: Rob Herring <robh@kernel.org>

Add a KUnit test that confirms a DTB has been loaded, i.e. there is a
root node, and that the of_have_populated_dt() API works properly. We
skip the test when CONFIG_OF_EARLY_FLATREE=n because in that case we
know architecture code hasn't called unflatten_(and_copy_)?device_tree()
which would populate some sort of root node.

Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Reviewed-by: David Gow <davidgow@google.com>
Cc: Brendan Higgins <brendan.higgins@linux.dev>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20240217010557.2381548-8-sboyd@kernel.orgSigned-off-by: Rob Herring <robh@kernel.org>

unflatten_device_tree() now ensures that the 'of_root' node is populated
with the root of a default empty devicetree. Remove the unittest code
that created 'of_root' if it was missing. Verify that 'of_root' is valid
before attempting to attach the testcase-data subtree. Remove the
unittest code that unflattens the unittest overlay base if architecture
is UML because that is always done now.
Signed-off-by: Frank Rowand <frowand.list@gmail.com>
Link: https://lore.kernel.org/r/20230317053415.2254616-3-frowand.list@gmail.com
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20240217010557.2381548-7-sboyd@kernel.orgSigned-off-by: Rob Herring <robh@kernel.org>

Call this function unconditionally so that we can populate an empty DTB
on platforms that don't boot with a firmware provided or builtin DTB.
There's no harm in calling unflatten_device_tree() unconditionally here.
If there isn't a non-NULL 'initial_boot_params' pointer then
unflatten_device_tree() returns early.

Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: x86@kernel.org
Cc: H. Peter Anvin <hpa@zytor.com>
Tested-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20240217010557.2381548-5-sboyd@kernel.orgSigned-off-by: Rob Herring <robh@kernel.org>

Call this function unconditionally so that we can populate an empty DTB
on platforms that don't boot with a command line provided DTB.  There's
no harm in calling unflatten_device_tree() unconditionally. If there
isn't a valid initial_boot_params dtb then unflatten_device_tree()
returns early.

Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: linux-um@lists.infradead.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20240217010557.2381548-4-sboyd@kernel.orgSigned-off-by: Rob Herring <robh@kernel.org>

When enabling CONFIG_OF on a platform where 'of_root' is not populated
by firmware, we end up without a root node. In order to apply overlays
and create subnodes of the root node, we need one. Create this root node
by unflattening an empty builtin dtb.

If firmware provides a flattened device tree (FDT) then the FDT is
unflattened via setup_arch(). Otherwise, the call to
unflatten(_and_copy)?_device_tree() will create an empty root node.

We make of_have_populated_dt() return true only if the DTB was loaded by
firmware so that existing callers don't change behavior after this
patch. The call in the of platform code is removed because it prevents
overlays from creating platform devices when the empty root node is
used.

[sboyd@kernel.org: Update of_have_populated_dt() to treat this empty dtb
as not populated. Drop setup_of() initcall]
Signed-off-by: Frank Rowand <frowand.list@gmail.com>
Link: https://lore.kernel.org/r/20230317053415.2254616-2-frowand.list@gmail.com
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20240217010557.2381548-3-sboyd@kernel.orgSigned-off-by: Rob Herring <robh@kernel.org>

We want to populate an empty DT whenever CONFIG_OF is enabled so that
overlays can be applied and the DT unit tests can be run. Make
unflatten_and_copy_device_tree() stop printing a warning if the
'initial_boot_params' pointer is NULL. Instead, simply copy the dtb if
there is one and then unflatten it. If there isn't a DT to copy, then
the call to unflatten_device_tree() is largely a no-op, so nothing
really changes here.

Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20240217010557.2381548-2-sboyd@kernel.orgSigned-off-by: Rob Herring <robh@kernel.org>

Convert the MediaTek SoC timer txt binding to json-schema.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220929122901.614315-3-angelogioacchino.delregno@collabora.com
[robh: Add mt8365 compatible, drop duplicate mediatek,mt6795-systimer, drop quotes]
Signed-off-by: Rob Herring <robh@kernel.org>

Enable the power-domains property for the fsl,intmux node. This addition
accommodates i.MX8QXP, i.MX8QM, and i.MX8DXL, which utilize the
power-domains property. Incorporating this eliminates DTB_CHECK errors in
relevant device tree source files.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240229200911.712572-1-Frank.Li@nxp.comSigned-off-by: Rob Herring <robh@kernel.org>

There is no reason to use RESERVEDMEM_OF_DECLARE() as the initialization
hook just saves off the base address and size. Use of
RESERVEDMEM_OF_DECLARE() is reserved for non-driver code and
initialization which must be done early. For qbman, retrieving the
address and size can be done in probe just as easily.

Link: https://lore.kernel.org/r/20240201192931.1324130-1-robh@kernel.orgSigned-off-by: Rob Herring <robh@kernel.org>

HDMI Audio has been added to the DT binding documentation with an
incorrect index. DT and the driver use index 26. This happened,
because the binding is missing MULTI_SAI type, which is using
index 25.
Reported-by: Michael Yackavage <michaely@ips-yes.com>
Fixes: 7bdbd87d ("dt-bindings: fsl-imx-sdma: Convert imx sdma to DT schema")
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Link: https://lore.kernel.org/r/20240226212740.2019837-6-sre@kernel.orgSigned-off-by: Rob Herring <robh@kernel.org>

Add compatibles used by different i.MX6 variants to the i.MX IOMUX
Controller GPR binding.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Link: https://lore.kernel.org/r/20240226212740.2019837-5-sre@kernel.orgSigned-off-by: Rob Herring <robh@kernel.org>

Add missing binding for i.MX anatop syscon.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Link: https://lore.kernel.org/r/20240226212740.2019837-4-sre@kernel.orgSigned-off-by: Rob Herring <robh@kernel.org>

Convert the i.MX6UL touchscreen DT binding to YAML.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20240226212740.2019837-3-sre@kernel.orgSigned-off-by: Rob Herring <robh@kernel.org>

Convert i.MX6UL pinctrl bindings to YAML.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Link: https://lore.kernel.org/r/20240226212740.2019837-2-sre@kernel.orgSigned-off-by: Rob Herring <robh@kernel.org>

for_each_property_of_node() is a macro and so doesn't have a stub inline
function for !OF. Move it out of the relevant #ifdef to make it available
to all users.

Fixes: 611cad72 ("dt: add of_alias_scan and of_alias_get_id")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20240303104853.31511-1-brgl@bgdev.plSigned-off-by: Rob Herring <robh@kernel.org>

Convert the Atmel AIC binding document to DT schema format using
json-schema.
Signed-off-by: Dharma Balasubiramani <dharma.b@microchip.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240222090738.41628-1-dharma.b@microchip.comSigned-off-by: Rob Herring <robh@kernel.org>

Everything in i2c.txt is covered by schemas/i2c/i2c-controller.yaml in
dtschema project, so remove i2c.txt and update links to it in the tree.
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240222174343.3482354-2-robh@kernel.orgSigned-off-by: Rob Herring <robh@kernel.org>

Marvell Berlin SoCs (later Syna) bindings were marked as
work-in-progress / unstable in 2015 in commit f07b4e49 ("Documentation:
bindings: berlin: consider our dt bindings as unstable").  Almost nine
years is enough, so drop the "unstable" remark and expect usual ABI
rules.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240224084414.6264-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Rob Herring <robh@kernel.org>

The servers for the @codeaurora domain are long retired and any messages
sent there will bounce.  Update the maintainer addresses for this
binding to match the entries in .mailmap so that anyone looking in the
file for a contact will see a correct address.
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://lore.kernel.org/r/20240223162027.4016065-1-quic_jhugo@quicinc.comSigned-off-by: Rob Herring <robh@kernel.org>

These bindings are already (better) described in soc/bcm/brcm,bcm2835-pm.yaml.
Drop these obsolete bindings.
Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/ZdC/624d1c8O3NRG@standask-GA-A55M-S2HPSigned-off-by: Rob Herring <robh@kernel.org>

The servers for the @codeaurora domain are long retired and any messages
sent there will bounce. Sai has left the company and appears no longer
active in the community which leaves this binding orphaned. Rajendra Nayak
has volunteered to take over as maintainer.
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Link: https://lore.kernel.org/r/20240223161455.4009469-1-quic_jhugo@quicinc.comSigned-off-by: Rob Herring <robh@kernel.org>

For most nodes with a compatible property a platform device is created.
For some an amba device is created instead. For the latter
of_amba_device_create() emits a message at debug level about the node
the device is created from. Add a similar message to
of_platform_device_create_pdata() to inform about the whole list of
created devices.

This also gives the right context for the following messages that
inform about created child devices.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20240222153119.2026363-2-u.kleine-koenig@pengutronix.deSigned-off-by: Rob Herring <robh@kernel.org>

i.MX6UL(L) uses "fsl,imx6sx-lcdif" as fallback compatible string,
but has only very lightweight DISPLAY power domain. Its DISPLAY
power domain is not supported by the binding / Linux kernel at
the moment. Since the current setup is working, let's remove the
power-domain from being required for that platform to fix the warning
printed by CHECK_DTBS=y.

Fixes: f62678a7 ("dt-bindings: mxsfb: Document i.MX8M/i.MX6SX/i.MX6SL power-domains property")
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20240224213240.1854709-7-sre@kernel.orgSigned-off-by: Rob Herring <robh@kernel.org>

A new check for vendor-prefixes used in compatibles finds some missing
ones. Add the missing ones already in use.

This omits some ancient prefixes in powerpc and arm32 as there are a
bunch of out of business one-offs that take too much time to track down
who they were.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240216025839.902288-1-robh@kernel.orgSigned-off-by: Rob Herring <robh@kernel.org>

Convert the existing DT binding to DT schema of the Atmel's HLCDC display
controller.
Signed-off-by: Dharma Balasubiramani <dharma.b@microchip.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240202001733.91455-2-dharma.b@microchip.comSigned-off-by: Rob Herring <robh@kernel.org>

All the RZ/G2L and alike SoC's (listed below) have ECCRAM0/1 interrupts
supported by the IRQC block, reflect the same in DT binding doc.

- R9A07G043U              - RZ/G2UL
- R9A07G044L/R9A07G044LC  - RZ/{G2L,G2LC}
- R9A07G054               - RZ/V2L
- R9A08G045               - RZ/G3S

For the RZ/G3S SoC ("R9A08G045") ECCRAM0/1 interrupts combined into single
interrupt so we just use the below to represent them:
- ec7tie1-0
- ec7tie2-0
- ec7tiovf-0

Previously, it was assumed that BUS-error and ECCRAM0/1 error interrupts
were only supported by RZ/G2UL ("R9A07G043U") and RZ/G3S ("R9A08G045")
SoCs. However, in reality, all RZ/G2L and similar SoCs (listed above)
support these interrupts. Therefore, mark the 'interrupt-names' property
as required for all the SoCs and update the example node in the binding
document.

Fixes: 96fed779 ("dt-bindings: interrupt-controller: Add Renesas RZ/G2L Interrupt Controller")
Fixes: 1cf0697a ("dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Document RZ/G3S")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240213085912.56600-1-prabhakar.mahadev-lad.rj@bp.renesas.comSigned-off-by: Rob Herring <robh@kernel.org>

Devicetree binding maintainers expect the example DTS in a binding to
show the usage of only this one particular binding, without unrelated
device nodes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240212150524.81819-3-krzysztof.kozlowski@linaro.orgSigned-off-by: Rob Herring <robh@kernel.org>

Add to the list of schema contents expected keywords with their
explanation: additionalProperties and unevaluatedProperties.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240212150524.81819-2-krzysztof.kozlowski@linaro.orgSigned-off-by: Rob Herring <robh@kernel.org>

The 'title' and 'description' fields in Devicetree schema is supposed to
describe hardware, not the binding itself.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240212150524.81819-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Rob Herring <robh@kernel.org>

Documentation/process/license-rules.rst and checkpatch expect the SPDX
identifier syntax for multiple licenses to use capital "OR".  Correct it
to keep consistent format and avoid copy-paste issues.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240208105327.129159-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Rob Herring <robh@kernel.org>

SmartRG described itself as a CPE manufacturer and produced few home
network devices (e.g. wireless routers). Their SmartRG SR400ac router
(smartrg,sr400ac) is covered by in-Linux DT binding and DTS file.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240212140839.27150-1-zajec5@gmail.comSigned-off-by: Rob Herring <robh@kernel.org>

Apparently on Qualcomm SM8550 and SM8650 the FastRPC compute callbacks
are DMA coherent:

  sm8650-qrd.dtb: fastrpc: compute-cb@2: 'dma-coherent' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240212110827.59302-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Rob Herring <robh@kernel.org>

Kernel test robot reports sparse warning:
sparse warnings: (new ones prefixed by >>)
>> drivers/of/base.c:1337:73: sparse: sparse: incorrect type in initializer
   (different base types) @@  expected restricted __be32 @@  got int @@
   drivers/of/base.c:1337:73: sparse:     expected restricted __be32
   drivers/of/base.c:1337:73: sparse:     got int

Thus, Make explicit conversions to mute warning(Although BE and LE are
exactly same in binary representation for 0/~0).
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202402042134.GEb3Bgwl-lkp@intel.com/Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Link: https://lore.kernel.org/r/20240205024033.3572617-1-dawei.li@shingroup.cnSigned-off-by: Rob Herring <robh@kernel.org>

Adding myself as a second maintainer for Open Firmware and Device Tree
to help Rob out with reviews and other maintainer work.

Cc: devicetree@vger.kernel.org
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20240210231513.111117-1-saravanak@google.comSigned-off-by: Rob Herring <robh@kernel.org>

The 'phandle-array' type is a bit ambiguous. It can be either just an
array of phandles or an array of phandles plus args. "i2c-parent" is
the former and needs to constrain each entry to a single phandle value.
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20240124190552.1551929-2-robh@kernel.orgSigned-off-by: Rob Herring <robh@kernel.org>

The I2C de-mux is different than an I2C mux, so i2c-mux.yaml is not
relevant and shouldn't be referenced.
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20240124190552.1551929-1-robh@kernel.orgSigned-off-by: Rob Herring <robh@kernel.org>

Add i.MX95 flexcan which is compatible i.MX93 flexcan
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240122091738.2078746-1-peng.fan@oss.nxp.comSigned-off-by: Rob Herring <robh@kernel.org>

Because of of_graph_get_endpoint_count() doesn't report error,
just return count of endpoint, the return type should be unsigned.
Tidyup it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/87plxbcvzb.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Rob Herring <robh@kernel.org>

of_graph_get_endpoint_count() doesn't have kerneldoc. Add it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/87r0hrcvzk.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Rob Herring <robh@kernel.org>