- 26 May, 2019 1 commit
-
-
Sam Ravnborg authored
To allow users to include dw_mipi_dsi.h without pulling in dependencies make dw_mipi_dsi.h self-contained. Use forward declarations when possible. v2: - Drop forward declarations of local structs (Laurent) - Add include of drm_modes.h (Laurent) Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Reviewed-by:
Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Peter Senna Tschudin <peter.senna@gmail.com> Cc: Martin Donnelly <martin.donnelly@ge.com> Cc: Martyn Welch <martyn.welch@collabora.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190519183636.19588-2-sam@ravnborg.org
-
- 25 May, 2019 4 commits
-
-
Jagan Teki authored
Vertical front and back porch values on existing driver are swapped. The existing timings are still working as expected, but to make sure it can compatible with techstar ts8550b bsp timings this patch swap the same values. Signed-off-by:
Jagan Teki <jagan@amarulasolutions.com> Signed-off-by:
-
Lukasz Majewski authored
This commit adds support for KOE's 5.7" display. Signed-off-by:
Lukasz Majewski <lukma@denx.de> Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Lukasz Majewski authored
This commit adds documentation entry description for KOE's 5.7" display. Signed-off-by:
-
Sébastien Szymanski authored
This patch adds support for the Armadeus ST0700 Adapt. It comes with a Santek ST0700I5Y-RBSLW 7.0" WVGA (800x480) TFT and an adapter board so that it can be connected on the TFT header of Armadeus Dev boards. Cc: stable@vger.kernel.org # v4.19 Reviewed-by:
Sébastien Szymanski <sebastien.szymanski@armadeus.com> Signed-off-by:
-
- 24 May, 2019 7 commits
-
-
Andrey Grodzovsky authored
Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/1558533443-7795-1-git-send-email-andrey.grodzovsky@amd.com
-
Gen Zhang authored
In drm_load_edid_firmware(), fwstr is allocated by kstrdup(). And fwstr is dereferenced in the following codes. However, memory allocation functions such as kstrdup() may fail and returns NULL. Dereferencing this null pointer may cause the kernel go wrong. Thus we should check this kstrdup() operation. Further, if kstrdup() returns NULL, we should return ERR_PTR(-ENOMEM) to the caller site. Signed-off-by:
Gen Zhang <blackgod016574@gmail.com> Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Linus Walleij authored
This adds a new DRM driver for the ST-Ericsson Multi Channel Display Engine, MCDE display controller. This hardware has three independent DSI hosts and can composit and display several memory buffers onto an LCD display. It was developed for several years inside of ST-Ericsson and shipped with a few million mobile phones from Sony and Samsung, as well as with the Snowball community development board. The driver is currently pretty rudimentary but supports a simple framebuffer so we can get penguins and graphics when using these SoCs. Acked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190524092019.19355-1-linus.walleij@linaro.org
-
Jerome Brunet authored
Imply the i2s part of the Synopsys HDMI driver for Amlogic SoCs. This will enable the i2s part by default when meson hdmi driver is enable but let platforms not supported by the audio subsystem disable it if necessary. Signed-off-by:
Jerome Brunet <jbrunet@baylibre.com> Reviewed-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
-
Yannick Fertré authored
Check version of DSI hardware IP. Only versions 1.30 & 1.31 are supported. Signed-off-by:
Yannick Fertré <yannick.fertre@st.com> Acked-by:
Philippe Cornu <philippe.cornu@st.com> Signed-off-by:
Benjamin Gaignard <benjamin.gaignard@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/1557500579-19720-1-git-send-email-yannick.fertre@st.com
-
Yannick Fertré authored
Clk_round_rate returns rounded clock without changing the hardware in any way. This function couldn't replace set_rate/get_rate calls. Todo comment has been removed & a new log inserted. Signed-off-by:
-
Stephen Rothwell authored
Link: Link: http://patchwork.freedesktop.org/patch/msgid/20190521105151.51ffa942@canb.auug.org.au Fixes: 374ed542 ("Merge drm/drm-next into drm-misc-next") Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Maxime Ripard <maxime.ripard@bootlin.com>
-
- 23 May, 2019 8 commits
-
-
Sean Paul authored
Fixes the following warnings: ../drivers/gpu/drm/drm_edid.c:4925: warning: Function parameter or member 'conn_state' not described in 'drm_hdmi_infoframe_set_hdr_metadata' ../drivers/gpu/drm/drm_edid.c:4925: warning: Excess function parameter 'hdr_metadata' description in 'drm_hdmi_infoframe_set_hdr_metadata' Fixes: 2cdbfd66 ("drm: Enable HDR infoframe support") Cc: Uma Shankar <uma.shankar@intel.com> Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com> Cc: Hans Verkuil <hansverk@cisco.com> Cc: dri-devel@lists.freedesktop.org Cc: linux-fbdev@vger.kernel.org Reviewed-by:
Uma Shankar <uma.shankar@intel.com> Signed-off-by:
Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190523135504.184354-1-sean@poorly.run
-
Paul Kocialkowski authored
The binner BO is not required until the V3D is in use, so avoid allocating it at probe and do it on the first non-dumb BO allocation. Keep track of which clients are using the V3D and liberate the buffer when there is none left, using a kref. Protect the logic with a mutex to avoid race conditions. The binner BO is created at the time of the first render ioctl and is destroyed when there is no client and no exec job using it left. The Out-Of-Memory (OOM) interrupt also gets some tweaking, to avoid enabling it before having allocated a binner bo. We also want to keep the BO alive during runtime suspend/resume to avoid failing to allocate it at resume. This happens when the CMA pool is full at that point and results in a hard crash. Signed-off-by:
Paul Kocialkowski <paul.kocialkowski@bootlin.com> Reviewed-by:
Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20190516145544.29051-5-paul.kocialkowski@bootlin.com
-
Paul Kocialkowski authored
Since the OOM interrupt directly deals with the binner bo, it doesn't make sense to try and handle it without a binner buffer registered. Signed-off-by:
-
Paul Kocialkowski authored
Check that we have a V3D device registered before attempting to allocate a binner buffer object. Signed-off-by:
-
Paul Kocialkowski authored
In preparation for wrapping the binner bo allocation helper with put/get helpers, pass the vc4 dev directly and drop the vc4 prefix. Signed-off-by:
-
Sean Paul authored
Fixes the following build warning: drivers/gpu/drm/mediatek/mtk_hdmi.c:327:2: warning: enumeration value ‘HDMI_INFOFRAME_TYPE_DRM’ not handled in switch [-Wswitch] Introduced with the addition of HDMI_INFOFRAME_TYPE_DRM in the commit below, but the code really should have been future-proofed from the start. Fixes: 2cdbfd66 ("drm: Enable HDR infoframe support") Cc: Uma Shankar <uma.shankar@intel.com> Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com> Cc: Hans Verkuil <hansverk@cisco.com> Cc: dri-devel@lists.freedesktop.org Cc: linux-fbdev@vger.kernel.org Acked-by:
CK Hu <ck.hu@mediatek.com> Signed-off-by:
-
Emil Velikov authored
DRM_UNLOCKED doesn't do anything for non-legacy drivers. Remove it. Cc: David Airlie <airlied@linux.ie> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: virtualization@lists.linux-foundation.org Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
Emil Velikov <emil.velikov@collabora.com> Link: http://patchwork.freedesktop.org/patch/msgid/20190522154702.16269-2-emil.l.velikov@gmail.comSigned-off-by:
Gerd Hoffmann <kraxel@redhat.com>
-
Gerd Hoffmann authored
cirrus_drv.h and cirrus_ttm.c are unused since commit ab3e023b ("drm/cirrus: rewrite and modernize driver"), apparently I ran "rm" instead of "git rm" on them so they are still in present the tree. Signed-off-by:
-
- 22 May, 2019 20 commits
-
-
Clément Péron authored
This add the H6 mali compatible in the dt-bindings to later support specific implementation. Signed-off-by:
Clément Péron <peron.clem@gmail.com> Reviewed-by:
-
Sean Paul authored
Backmerging 5.2-rc1 to -misc-next for robher Signed-off-by: -
Uma Shankar authored
Added unpack function for DRM infoframe for dynamic range and mastering infoframe readout. v2: Addressed Ville's review comments. Suggested-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Ville Syrjälä authored
ADD HLG EOTF to the list of EOTF transfer functions supported. Hybrid Log-Gamma (HLG) is a high dynamic range (HDR) standard. HLG defines a nonlinear transfer function in which the lower half of the signal values use a gamma curve and the upper half of the signal values use a logarithmic curve. v2: Rebase v3: Fixed a warning message v4: Addressed Shashank's review comments v5: Addressed Jonas Karlman's review comment and dropped the i915 tag from header. Signed-off-by:
Shashank Sharma <shashank.sharma@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1558015817-12025-8-git-send-email-uma.shankar@intel.com
-
Uma Shankar authored
Enable Dynamic Range and Mastering Infoframe for HDR content, which is defined in CEA 861.3 spec. The metadata will be computed based on blending policy in userspace compositors and passed as a connector property blob to driver. The same will be sent as infoframe to panel which support HDR. Added the const version of infoframe for DRM metadata for HDR. v2: Rebase and added Ville's POC changes. v3: No Change v4: Addressed Shashank's review comments and merged the patch making drm infoframe function arguments as constant. v5: Rebase v6: Fixed checkpatch warnings with --strict option. Addressed Shashank's review comments and added his RB. v7: Addressed Brian Starkey's review comments. Merged 2 patches into one. v8: Addressed Jonas Karlman review comments. v9: Addressed Jonas Karlman review comments. v10: Addressed Ville's review comments. v11: Added BUILD_BUG_ON and sizeof instead of magic numbers as per Ville's comments. Signed-off-by:
-
Uma Shankar authored
HDR metadata block is introduced in CEA-861.3 spec. Parsing the same to get the panel's HDR metadata. v2: Rebase and added Ville's POC changes to the patch. v3: No Change v4: Addressed Shashank's review comments v5: Addressed Shashank's comment and added his RB. v6: Addressed Jonas Karlman review comments. v7: Adressed Ville's review comments and fixed the issue with length handling. v8: Put the length check as per the convention followed in existing code, as suggested by Ville. Signed-off-by:
-
Jonas Karlman authored
This adds reference count for HDR metadata blob, handled as part of duplicate and destroy connector state functions. v2: Removed the hdr_metadata_changed initialization as the variable is dropped and not required. Signed-off-by:
Jonas Karlman <jonas@kwiboo.se> Signed-off-by:
-
Uma Shankar authored
This patch adds a blob property to get HDR metadata information from userspace. This will be send as part of AVI Infoframe to panel. It also implements get() and set() functions for HDR output metadata property.The blob data is received from userspace and saved in connector state, the same is returned as blob in get property call to userspace. v2: Rebase and modified the metadata structure elements as per Ville's POC changes. v3: No Change v4: Addressed Shashank's review comments v5: Rebase. v6: Addressed Brian Starkey's review comments, defined new structure with header for dynamic metadata scalability. Merge get/set property functions for metadata in this patch. v7: Addressed Jonas Karlman review comments and defined separate structure for infoframe to better align with CTA 861.G spec. Added Shashank's RB. v8: Addressed Ville's review comments. Moved sink metadata structure out of uapi headers as suggested by Jonas Karlman. v9: Rebase and addressed Jonas Karlman review comments. v10: Addressed Ville's review comments, dropped the metdata_changed state variable as its not needed anymore. Signed-off-by:
-
Clément Péron authored
Allwinner H6 has an ARM Mali-T720 MP2 which required a bus_clock. Add an optional bus_clock at the init of the panfrost driver. Signed-off-by:
-
Icenowy Zheng authored
Some SoCs adds a bus clock gate to the Mali Midgard GPU. Add the binding for the bus clock. Signed-off-by:
Icenowy Zheng <icenowy@aosc.io> Signed-off-by:
-
Christian König authored
That is now done by the DMA-buf helpers instead. Signed-off-by:
-
Christian König authored
To allow a smooth transition from pinning buffer objects to dynamic invalidation we first start to cache the sg_table for an attachment. v2: keep closer to the DRM implementation Signed-off-by:
-
Sam Ravnborg authored
Drop remaining uses of the deprecated drmP.h in gma500 Replaced drmp.h with forward declarations or include files as relevant. Moved all include files to blocks in following order: \#include <linux/*> \#include <asm/*> \#include <drm/*> \#include "" And within each block sort the include files alphabetically. Signed-off-by:
Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190519195526.3422-6-sam@ravnborg.org
-
Sam Ravnborg authored
The DRM_UDELAY wrapper from drm_os_linux.h is used in a few places, all other places calls udelay() with no wrapper. There is no reason to continue to use this wrapper - so drop it and direct call udelay(). Signed-off-by:
-
Sam Ravnborg authored
Add proper forward declarations to minimize dependencies on other header files. Just add enough that we can safely include all header files in alphabetically order in relevant files. Signed-off-by:
-
Sam Ravnborg authored
Drop use of drmp.h from all header files in drm/gma500. Fix fallout in all files. In some cases moved include lines and sorted them too. With drmP.h removed from all header files it can now be removed from each .c file without any further dependencies Signed-off-by:
-
Sam Ravnborg authored
The header file gma_drm.h is empty so remove it and drop all uses of the file. Signed-off-by:
-
Thomas Zimmermann authored
We may not call drm_gem_vram_{pin,unpin}_locked() with an unlocked BO. Now test for this. Signed-off-by:Thomas Zimmermann <tzimmermann@suse.de> Acked-by:
-
Thomas Zimmermann authored
To align with the rest of DRM terminology, the GEM VRAM helpers now use lock and unlock in places where reserve and unreserve where used before. All callers have been adapted. Signed-off-by:
-
Thomas Zimmermann authored
The push-to-system function forces a buffer out of video RAM. This decision should rather be made by the memory manager. By replacing the function with calls to the kunmap and unpin functions, the buffer's memory becomes available, but the buffer remains in VRAM until it's evicted by a pin operation. This patch replaces the remaining instances of drm_gem_vram_push_to_system() in ast and mgag200, and removes the function from DRM. Signed-off-by:
-
