After removing drm_pci_alloc/free, some instances where drm_pci_free()
would have kfreed the dma handle were skipped.

Ensure these handles are freed properly.
Signed-off-by: Joseph Kogut <joseph.kogut@gmail.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210518212859.4148903-1-joseph.kogut@gmail.com

The option DRM_KMS_FB_HELPER has been removed. Also remove the last
remaining select statement for it.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 91185d55 ("drm: Remove DRM_KMS_FB_HELPER Kconfig option")
Acked-by: Maxime Ripard <maxime@cerno.tech>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20210526100825.29450-1-tzimmermann@suse.de

The function ttm_bo_mmap is unused. Remove it and it's helpers; including
the verify_access callback in struct ttm_device_funcs.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210525151055.8174-8-tzimmermann@suse.de

Vmwgfx is the only user of the TTM's verify_access callback. Inline
the call and avoid the indirection through the function pointer.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210525151055.8174-7-tzimmermann@suse.de

The vmwgfx driver is the only remaining user of ttm_bo_mmap(). Inline
the code. The internal helper ttm_bo_vm_lookup() is now also part of
vmwgfx as vmw_bo_vm_lookup().

v2:
	* replace pr_err() with drm_err() (Zack)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210525151055.8174-6-tzimmermann@suse.de

Moving the driver-specific mmap code into a GEM object function allows
for using DRM helpers for various mmap callbacks.

The GEM object function is provided by GEM TTM helpers. Nouveau's
implementation of verify_access is unused and has been removed. Access
permissions are validated by the DRM helpers.

As a side effect, nouveau_ttm_vm_ops and nouveau_ttm_fault() are now
implemented in nouveau's GEM code.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210525151055.8174-5-tzimmermann@suse.de

Moving the driver-specific mmap code into a GEM object function allows
for using DRM helpers for various mmap callbacks.

This change also allows to support prime-based mmap via DRM's helper
drm_gem_prime_mmap().

Permission checks are implemented by drm_gem_mmap(), with an additional
check for radeon_ttm_tt_has_userptr() in the GEM object function. The
function radeon_verify_access() is now unused and has thus been removed.

As a side effect, radeon_ttm_vm_ops and radeon_ttm_fault() are now
implemented in amdgpu's GEM code.

v3:
	* remove unnecessary checks from mmap (Christian)
v2:
	* rename radeon_ttm_vm_ops and radeon_ttm_fault() to
	  radeon_gem_vm_ops and radeon_gem_fault() (Christian)
	* fix commit description (Alex)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210525151055.8174-4-tzimmermann@suse.de

Moving the driver-specific mmap code into a GEM object function allows
for using DRM helpers for various mmap callbacks.

This change resolves several inconsistencies between regular mmap and
prime-based mmap. The vm_ops field in vma is now set for all mmap'ed
areas. Previously it way only set for regular mmap calls, prime-based
mmap used TTM's default vm_ops. The function amdgpu_verify_access() is
no longer being called and therefore removed by this patch.

As a side effect, amdgpu_ttm_vm_ops and amdgpu_ttm_fault() are now
implemented in amdgpu's GEM code.

v4:
	* rebased
v3:
	* rename mmap function to amdgpu_gem_object_mmap() (Christian)
	* remove unnecessary checks from mmap (Christian)
v2:
	* rename amdgpu_ttm_vm_ops and amdgpu_ttm_fault() to
	  amdgpu_gem_vm_ops and amdgpu_gem_fault() (Christian)
	* the check for kfd_bo has meanwhile been removed
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210525151055.8174-3-tzimmermann@suse.de

Drivers may want to set their own callbacks for a VM area. Only set
TTM's callbacks if the vm_ops field is clear.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210525151055.8174-2-tzimmermann@suse.de

Problem:
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:332:1: warning: unused label 'exit' [-Wunused-label]
exit:
^~~~~

Fix: Put #ifdef CONFIG_64BIT around exit
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210525184431.1170373-1-andrey.grodzovsky@amd.com

Problem:
When device goes into runtime suspend due to prolonged
inactivity (e.g. BACO sleep) and then hot unplugged,
PCI core will try to wake up the device as part of
unplug process. Since the device is gone all HW
programming during rpm resume fails leading
to a bad SW state later during pci remove handling.

Fix:
Use a flag we use for PCIe error recovery to avoid
accessing registres. This allows to successfully complete
rpm resume sequence and finish pci remove.

v2: Renamed HW access block flag
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1081
Link: https://patchwork.freedesktop.org/patch/msgid/20210521204122.762288-2-andrey.grodzovsky@amd.com

Make it's name not feature but function descriptive.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210521204122.762288-1-andrey.grodzovsky@amd.com

Alloc GEM buffers backed by noncoherent memory on SoCs where it is
actually faster than write-combine.

This dramatically speeds up software rendering on these SoCs, even for
tasks where write-combine memory should in theory be faster (e.g. simple
blits).

v3: The option is now selected per-SoC instead of being a module
    parameter.

v5: - Fix drm_atomic_get_new_plane_state() used to retrieve the old
      state
    - Use custom drm_gem_fb_create()
    - Only check damage clips and sync DMA buffers if non-coherent
      buffers are used
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210523170415.90410-4-paul@crapouillou.net

This function can be used by drivers that use damage clips and have
CMA GEM objects backed by non-coherent memory. Calling this function
in a plane's .atomic_update ensures that all the data in the backing
memory have been written to RAM.

v3: - Only sync data if using GEM objects backed by non-coherent memory.
    - Use a drm_device pointer instead of device pointer in prototype

v5: - Rename to drm_fb_cma_sync_non_coherent
    - Invert loops for better cache locality
    - Only sync BOs that have the non-coherent flag
    - Move to drm_fb_cma_helper.c to avoid circular dependency
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210523170415.90410-3-paul@crapouillou.net

Having GEM buffers backed by non-coherent memory is interesting in the
particular case where it is faster to render to a non-coherent buffer
then sync the data cache, than to render to a write-combine buffer, and
(by extension) much faster than using a shadow buffer. This is true for
instance on some Ingenic SoCs, where even simple blits (e.g. memcpy)
are about three times faster using this method.

Add a 'map_noncoherent' flag to the drm_gem_cma_object structure, which
can be set by the drivers when they create the dumb buffer.

Since this really only applies to software rendering, disable this flag
as soon as the CMA objects are exported via PRIME.

v3: New patch. Now uses a simple 'map_noncoherent' flag to control how
    the objects are mapped, and use the new dma_mmap_pages function.

v4: Make sure map_noncoherent is always disabled when creating GEM
    objects meant to be used with dma-buf.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210523170415.90410-2-paul@crapouillou.net

pm_runtime_get_sync will increment pm usage counter even it failed.
Forgetting to putting operation will result in reference leak here.
Fix it by replacing it with pm_runtime_resume_and_get to keep usage
counter balanced.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/1621840854-105978-1-git-send-email-zou_wei@huawei.com

The PM Runtime docs specifically call out the need to call
pm_runtime_dont_use_autosuspend() in the remove() callback if
pm_runtime_use_autosuspend() was called in probe():

> Drivers in ->remove() callback should undo the runtime PM changes done
> in ->probe(). Usually this means calling pm_runtime_disable(),
> pm_runtime_dont_use_autosuspend() etc.

We should do this. This fixes a warning splat that I saw when I was
testing out the panel-simple's remove().

Fixes: 3235b0f2 ("drm/panel: panel-simple: Use runtime pm to avoid excessive unprepare / prepare")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210517130450.v7.1.I9e947183e95c9bd067c9c1d51208ac6a96385139@changeid

It looks like some displays (like the LG 27UL850-W) don't enable the
scrambling when the HDMI driver enables it. However, if we set later the
scrambler enable bit, the display will work as expected.

Let's create delayed work queue to periodically look at the display
scrambling status, and if it's not set yet try to enable it again.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210507150515.257424-12-maxime@cerno.tech

The HDMI controller on the BCM2711 includes a scrambler in order to
reach the HDMI 2.0 modes that require it. Let's add the support for it.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210507150515.257424-11-maxime@cerno.tech

In order to reach the frequencies needed to output at 594MHz, the
firmware needs to be configured with the appropriate parameters in the
config.txt file (enable_hdmi_4kp60 and force_turbo).

Let's detect it at bind time, warn the user if we can't, and filter out
the relevant modes.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210507150515.257424-10-maxime@cerno.tech

The BVB clock rate computation doesn't take into account a mode clock of
594MHz that we're going to need to support 4k60.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210507150515.257424-9-maxime@cerno.tech

We'll need to have the HVS binding before the HDMI controllers so that
we can check whether the firmware allows to run in 4kp60. Reorder a bit
the component list, and document the current constraints we're aware of.
Acked-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210507150515.257424-8-maxime@cerno.tech

Since we fixed the hooks to disable the encoder at boot, we now have an
unbalanced clk_disable call at boot since we never enabled them in the
first place.

Let's mimic the state of the hardware and enable the clocks at boot if
the controller is enabled to get the use-count right.

Cc: <stable@vger.kernel.org> # v5.10+
Fixes: 09c43813 ("drm/vc4: hdmi: Implement finer-grained hooks")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210507150515.257424-7-maxime@cerno.tech

At boot, we can't rely on the vc4_get_crtc_encoder since we don't have a
state yet and thus will not be able to figure out which connector is
attached to our CRTC.

However, we have a muxing bit in the CRTC register we can use to get the
encoder currently connected to the pixelvalve. We can thus read that
register, lookup the associated register through the vc4_pv_data
structure, and then pass it to vc4_crtc_disable so that we can perform
the proper operations.

Fixes: 875a4d53 ("drm/vc4: drv: Disable the CRTC at boot time")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210507150515.257424-6-maxime@cerno.tech

The vc4_get_crtc_encoder function currently only works when the
connector->state->crtc pointer is set, which is only true when the
connector is currently enabled.

However, we use it as part of the disable path as well, and our lookup
will fail in that case, resulting in it returning a null pointer we
can't act on.

We can access the connector that used to be connected to that crtc
though using the old connector state in the disable path.

Since we want to support both the enable and disable path, we can
support it by passing the state accessor variant as a function pointer,
together with the atomic state.

Fixes: 792c3132 ("drm/vc4: encoder: Add finer-grained encoder callbacks")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210507150515.257424-5-maxime@cerno.tech

The vc4_crtc_config_pv will need to access the drm_atomic_state
structure and its only parent function, vc4_crtc_atomic_enable already
has access to it. Let's pass it as a parameter.

Fixes: 792c3132 ("drm/vc4: encoder: Add finer-grained encoder callbacks")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210507150515.257424-4-maxime@cerno.tech

The vc4_set_crtc_possible_masks is meant to run over all the encoders
and then set their possible_crtcs mask to their associated pixelvalve.

However, since the commit 39fcb280 ("drm/vc4: txp: Turn the TXP into
a CRTC of its own"), the TXP has been turned to a CRTC and encoder of
its own, and while it does indeed register an encoder, it no longer has
an associated pixelvalve. The code will thus run over the TXP encoder
and set a bogus possible_crtcs mask, overriding the one set in the TXP
bind function.

In order to fix this, let's skip any virtual encoder.

Cc: <stable@vger.kernel.org> # v5.9+
Fixes: 39fcb280 ("drm/vc4: txp: Turn the TXP into a CRTC of its own")
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210507150515.257424-3-maxime@cerno.tech

The current code does a binary OR on the possible_crtcs variable of the
TXP encoder, while we want to set it to that value instead.

Cc: <stable@vger.kernel.org> # v5.9+
Fixes: 39fcb280 ("drm/vc4: txp: Turn the TXP into a CRTC of its own")
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210507150515.257424-2-maxime@cerno.tech

The VEC's DAC on BCM2711 is slightly different compared to the one on
BCM283x and needs different configuration. In particular, bit 3
(mask 0x8) switches the BCM2711 DAC input to "self-test input data",
which makes the output unusable. Separating two compatible variants in
devicetrees and the DRM driver was therefore necessary.

The configurations used for both variants have been borrowed from
Raspberry Pi (model 3B for BCM283x, 4B for BCM2711) firmware defaults.
Signed-off-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210520150344.273900-4-maxime@cerno.tech

The BCM2711 VEC uses a slightly different, incompatible, setup than the
one used for the earlier SoC. Add a new compatible for it.
Signed-off-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210520150344.273900-3-maxime@cerno.tech

On the BCM2711 (Raspberry Pi 4), the VEC is actually connected to
output 2 of pixelvalve3.

NOTE: This contradicts the Broadcom docs, but has been empirically
tested and confirmed by Raspberry Pi firmware devs.
Signed-off-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210520150344.273900-2-maxime@cerno.tech

Backmerging from drm/drm-next to the patches for AMD devices
for v5.14.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

When devm_ioremap_resource() fails, a clear enough error message will be
printed by its subfunction __devm_ioremap_resource(). The error
information contains the device name, failure cause, and possibly resource
information.

Therefore, remove the error printing here to simplify code and reduce the
binary size.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210511091344.4508-1-thunder.leizhen@huawei.com

The dev_info():s in the DSI driver are very talkative,
depromote these to dev_dbg().
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210313230913.4108256-1-linus.walleij@linaro.org

Converts display/faraday,tve200.txt to yaml.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210519203547.837237-1-clabbe@baylibre.com

Merge tag 'amd-drm-next-5.14-2021-05-21' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-next-5.14-2021-05-21:

amdgpu:
- RAS fixes
- SR-IOV fixes
- More BO management cleanups
- Aldebaran fixes
- Display fixes
- Support for new GPU, Beige Goby
- Backlight fixes

amdkfd:
- RAS fixes
- DMA mapping fixes
- HMM SVM fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210521045743.4047-1-alexander.deucher@amd.com

Merge tag 'amd-drm-next-5.14-2021-05-19' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-next-5.14-2021-05-19:

amdgpu:
- Aldebaran updates
- More LTTPR display work
- Vangogh updates
- SDMA 5.x GCR fixes
- RAS fixes
- PCIe ASPM support
- Modifier fixes
- Enable TMZ on Renoir
- Buffer object code cleanup
- Display overlay fixes
- Initial support for multiple eDP panels
- Initial SR-IOV support for Aldebaran
- DP link training refactor
- Misc code cleanups and bug fixes
- SMU regression fixes for variable sized arrays
- MAINTAINERS fixes for amdgpu

amdkfd:
- Initial SR-IOV support for Aldebaran
- Topology fixes
- Initial HMM SVM support
- Misc code cleanups and bug fixes

radeon:
- Misc code cleanups and bug fixes
- SMU regression fixes for variable sized arrays
- Flickering fix for Oland with multiple 4K displays

UAPI:
- amdgpu: Drop AMDGPU_GEM_CREATE_SHADOW flag.
  This was always a kernel internal flag and userspace use of it has always been blocked.
  It's no longer needed so remove it.
- amdkgd: HMM SVM support
  Overview: https://patchwork.freedesktop.org/series/85562/
  Porposed userspace: https://github.com/RadeonOpenCompute/ROCT-Thunk-Interface/tree/fxkamd/hmm-wipSigned-off-by: Dave Airlie <airlied@redhat.com>

From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210520031258.231896-1-alexander.deucher@amd.com

Merge tag 'drm-intel-next-2021-05-19-1' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

Core Changes:

- drm: Rename DP_PSR_SELECTIVE_UPDATE to better mach eDP spec (Jose).

Driver Changes:

- Display plane clock rates fixes and improvements (Ville).
- Uninint DMC FW loader state during shutdown (Imre).
- Convert snprintf to sysfs_emit (Xuezhi).
- Fix invalid access to ACPI _DSM objects (Takashi).
- A big refactor around how i915 addresses the graphics
  and display IP versions. (Matt, Lucas).
- Backlight fix (Lyude).
- Display watermark and DBUF fixes (Ville).
- HDCP fix (Anshuman).
- Improve cases where display is not available (Jose).
- Defeature PSR2 for RKL and ALD-S (Jose).
- VLV DSI panel power fixes and improvements (Hans).
- display-12 workaround (Jose).
- Fix modesetting (Imre).
- Drop redundant address-of op before lttpr_common_caps array (Imre).
- Fix compiler checks (Jose, Jason).
- GLK display fixes (Ville).
- Fix error code returns (Dan).
- eDP novel: back again to slow and wide link training everywhere (Kai-Heng).
- Abstract DMC FW path (Rodrigo).
- Preparation and changes for upcoming
  XeLPD display IP (Jose, Matt, Ville, Juha-Pekka, Animesh).
- Fix comment typo in DSI code (zuoqilin).
- Simplify CCS and UV plane alignment handling (Imre).
- PSR Fixes on TGL (Gwan-gyeong, Jose).
- Add intel_dp_hdcp.h and rename init (Jani).
- Move crtc and dpll declarations around (Jani).
- Fix pre-skl DP AUX precharge length (Ville).
- Remove stray newlines from random files (Ville).
- crtc->index and intel_crtc+drm_crtc pointer clean-up (Ville).
- Add frontbuffer tracking tracepoints (Ville).
- ADL-S PCI ID updates (Anand).
- Use unique backlight device names (Jani).
- A few clean-ups on i915/audio (Jani).
- Use intel_framebuffer instead of drm one on intel_fb functions (Imre).
- Add the missing MC CCS/XYUV8888 format support on display >= 12 (Imre).
- Nuke display error state (Ville).
- ADL-P initial enablement patches
  starting to land (Clint, Imre, Jose, Umesh, Vandita, Mika).
- Display clean-up around VBT and the strap bits (Lucas).
- Try YCbCr420 color when RGB fails (Werner).
- More PSR fixes and improvements (Jose).
- Other generic display code clean-up (Jose, Ville).
- Use correct downstream caps for check Src-Ctl mode for PCON (Ankit).
- Disable HiZ Raw Stall Optimization on broken gen7 (Simon).
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YKVioeu0JkUAlR7y@intel.com

Motivated because I got confused and Christian confirmed why this
works. I think this is non-obvious enough that it merits a slightly
longer comment.
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: Christian König <ckoenig.leichtzumerken@gmail.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210519082409.672016-1-daniel.vetter@ffwll.ch

Add the missing unlock and free before return from function
drm_legacy_addbufs_pci() in the error handling case.

Fixes: 70556e24 ("drm: remove usage of drm_pci_alloc/free")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1621341302-112089-1-git-send-email-zou_wei@huawei.com