- 08 Dec, 2018 7 commits
-
-
Sultan Alsawaf authored
commit 000ade80 upstream. By passing a limit of 2 bytes to strncat, strncat is limited to writing fewer bytes than what it's supposed to append to the name here. Since the bounds are checked on the line above this, just remove the string bounds checks entirely since they're unneeded. Signed-off-by:
Sultan Alsawaf <sultanxda@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Guenter Roeck authored
commit 166126c1 upstream. gcc 8.1.0 complains: fs/kernfs/symlink.c:91:3: warning: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length fs/kernfs/symlink.c: In function 'kernfs_iop_get_link': fs/kernfs/symlink.c:88:14: note: length computed here Using strncpy() is indeed less than perfect since the length of data to be copied has already been determined with strlen(). Replace strncpy() with memcpy() to address the warning and optimize the code a little. Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Acked-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Linus Torvalds authored
commit 38c7b224 upstream. New versions of gcc reasonably warn about the odd pattern of strncpy(p, q, strlen(q)); which really doesn't make sense: the strncpy() ends up being just a slow and odd way to write memcpy() in this case. There was a comment about _why_ the code used strncpy - to avoid the terminating NUL byte, but memcpy does the same and avoids the warning. Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Guenter Roeck authored
commit 77d2a24b upstream. gcc 8.1.0 complains: lib/kobject.c:128:3: warning: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Wstringop-truncation] lib/kobject.c: In function 'kobject_get_path': lib/kobject.c:125:13: note: length computed here Using strncpy() is indeed less than perfect since the length of data to be copied has already been determined with strlen(). Replace strncpy() with memcpy() to address the warning and optimize the code a little. Signed-off-by:
-
Linus Torvalds authored
commit b1286ed7 upstream. New versions of gcc reasonably warn about the odd pattern of strncpy(p, q, strlen(q)); which really doesn't make sense: the strncpy() ends up being just a slow and odd way to write memcpy() in this case. Apparently there was a patch for this floating around earlier, but it got lost. Acked-again-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Stephen Rothwell authored
commit 217c3e01 upstream. They are too noisy Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Xiongfeng Wang authored
commit 321cb030 upstream. gcc-8 reports many -Wpacked-not-aligned warnings. The below are some examples. ./include/linux/ceph/msgr.h:67:1: warning: alignment 1 of 'struct ceph_entity_addr' is less than 8 [-Wpacked-not-aligned] } __attribute__ ((packed)); ./include/linux/ceph/msgr.h:67:1: warning: alignment 1 of 'struct ceph_entity_addr' is less than 8 [-Wpacked-not-aligned] } __attribute__ ((packed)); ./include/linux/ceph/msgr.h:67:1: warning: alignment 1 of 'struct ceph_entity_addr' is less than 8 [-Wpacked-not-aligned] } __attribute__ ((packed)); This patch suppresses this kind of warnings for default setting. Signed-off-by:
Xiongfeng Wang <xiongfeng.wang@linaro.org> Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
- 05 Dec, 2018 33 commits
-
-
Greg Kroah-Hartman authored
-
Chris Fries authored
(commit ae6b289a upstream) Set the clang KBUILD_CFLAGS up before including arch/ Makefiles, so that ld-options (etc.) can work correctly. This fixes errors with clang such as ld-options trying to CC against your host architecture, but LD trying to link against your target architecture. Signed-off-by:
Chris Fries <cfries@google.com> Signed-off-by:
Nick Desaulniers <ndesaulniers@google.com> Reviewed-by:
Matthias Kaehlcke <mka@chromium.org> Tested-by:
-
Ard Biesheuvel authored
(commit b3879a4d upstream) The ARM decompressor is finicky when it comes to uninitialized variables with local linkage, the reason being that it may relocate .text and .bss independently when executing from ROM. This is only possible if all references into .bss from .text are absolute, and this happens to be the case for references emitted under -fpic to symbols with external linkage, and so all .bss references must involve symbols with external linkage. When building the ARM stub using clang, the initialized local variable __chunk_size is optimized into a zero-initialized flag that indicates whether chunking is in effect or not. This flag is therefore emitted into .bss, which triggers the ARM decompressor's diagnostics, resulting in a failed build. Under UEFI, we never execute the decompressor from ROM, so the diagnostic makes little sense here. But we can easily work around the issue by making __chunk_size global instead. However, given that the file I/O chunking that is controlled by the __chunk_size variable is intended to work around known bugs on various x86 implementations of UEFI, we can simply make the chunking an x86 specific feature. This is an improvement by itself, and also removes the need to parse the efi= options in the stub entirely. Tested-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by:
Matt Fleming <matt@codeblueprint.co.uk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/1486380166-31868-8-git-send-email-ard.biesheuvel@linaro.org [ Small readability edits. ] Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Arnd Bergmann authored
(commit a45463cb upstream) Building with clang shows lots of warning like: drivers/amba/bus.c:447:8: warning: implicit conversion from 'long long' to 'int' changes value from 4294967248 to -48 [-Wconstant-conversion] static DECLARE_DELAYED_WORK(deferred_retry_work, amba_deferred_retry_func); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ include/linux/workqueue.h:187:26: note: expanded from macro 'DECLARE_DELAYED_WORK' struct delayed_work n = __DELAYED_WORK_INITIALIZER(n, f, 0) ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ include/linux/workqueue.h:177:10: note: expanded from macro '__DELAYED_WORK_INITIALIZER' .work = __WORK_INITIALIZER((n).work, (f)), \ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ include/linux/workqueue.h:170:10: note: expanded from macro '__WORK_INITIALIZER' .data = WORK_DATA_STATIC_INIT(), \ ^~~~~~~~~~~~~~~~~~~~~~~ include/linux/workqueue.h:111:39: note: expanded from macro 'WORK_DATA_STATIC_INIT' ATOMIC_LONG_INIT(WORK_STRUCT_NO_POOL | WORK_STRUCT_STATIC) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~ include/asm-generic/atomic-long.h:32:41: note: expanded from macro 'ATOMIC_LONG_INIT' #define ATOMIC_LONG_INIT(i) ATOMIC_INIT(i) ~~~~~~~~~~~~^~ arch/arm/include/asm/atomic.h:21:27: note: expanded from macro 'ATOMIC_INIT' #define ATOMIC_INIT(i) { (i) } ~ ^ This makes the type cast explicit, which shuts up the warning. Signed-off-by:
-
Stefan Agner authored
(commit 4ea7bdc6 upstream) As documented in GCC naked functions should only use basic ASM syntax. The extended ASM or mixture of basic ASM and "C" code is not guaranteed. Currently this works because it was hard coded to follow and check GCC behavior for arguments and register placement. Furthermore with clang using parameters in Extended asm in a naked function is not supported: arch/arm/firmware/trusted_foundations.c:47:10: error: parameter references not allowed in naked functions : "r" (type), "r" (arg1), "r" (arg2) ^ Use a regular function to be more portable. This aligns also with the other SMC call implementations e.g. in qcom_scm-32.c and bcm_kona_smc.c. Cc: Dmitry Osipenko <digetx@gmail.com> Cc: Stephen Warren <swarren@nvidia.com> Cc: Thierry Reding <treding@nvidia.com> Signed-off-by:
Stefan Agner <stefan@agner.ch> Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Stefan Agner authored
(commit 10d87134 upstream) Mixing asm and C code is not recommended in a naked function by gcc and leads to an error when using clang: drivers/bus/arm-cci.c:2107:2: error: non-ASM statement in naked function is not supported unreachable(); ^ While the function is marked __naked it actually properly return in asm. There is no need for the unreachable() call. GCC 7.2 generates identical object files before and after, other than (for obvious reasons) the line numbers generated by WANT_WARN_ON_SLOWPATH for all the WARN()s appearing later in the file. Suggested-by:
Russell King <linux@arm.linux.org.uk> Signed-off-by:
Nicolas Pitre <nico@linaro.org> Reviewed-by:
Robin Murphy <robin.murphy@arm.com> Signed-off-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
-
Stefan Agner authored
(commit c1c38668 upstream) Use cc-options call for compiler options which are not available in clang. With this patch an ARMv7 multi platform kernel can be successfully build using clang (tested with version 5.0.1). Based-on-patches-by:
Behan Webster <behanw@converseincode.com> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Stefan Agner authored
(commit 22905a24 upstream) According to GCC documentation -m(no-)thumb-interwork is meaningless in AAPCS configurations. Also clang does not support the flag: clang-5.0: error: unknown argument: '-mno-thumb-interwork' Just drop -mno-thumb-interwork in AEABI configuration. Signed-off-by:
-
Alistair Strachan authored
(commit 41f1c484 upstream) When building with CONFIG_EFI and CONFIG_EFI_STUB on ARM, the libstub Makefile would use -mno-single-pic-base without checking it was supported by the compiler. As the ARM (32-bit) clang backend does not support this flag, the build would fail. This changes the Makefile to check the compiler's support for -mno-single-pic-base before using it, similar to c1c38668 ("ARM: 8767/1: add support for building ARM kernel with clang"). Signed-off-by:
Alistair Strachan <astrachan@google.com> Reviewed-by:
-
YueHaibing authored
commit 6484a677 upstream. gcc '-Wunused-but-set-variable' warning: drivers/misc/mic/scif/scif_rma.c: In function 'scif_create_remote_lookup': drivers/misc/mic/scif/scif_rma.c:373:25: warning: variable 'vmalloc_num_pages' set but not used [-Wunused-but-set-variable] 'vmalloc_num_pages' should be used to determine if the address is within the vmalloc range. Fixes: ba612aa8 ("misc: mic: SCIF memory registration and unregistration") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Dexuan Cui authored
commit eceb0596 upstream. This is a longstanding issue: if the vmbus upper-layer drivers try to consume too many GPADLs, the host may return with an error 0xC0000044 (STATUS_QUOTA_EXCEEDED), but currently we forget to check the creation_status, and hence we can pass an invalid GPADL handle into the OPEN_CHANNEL message, and get an error code 0xc0000225 in open_info->response.open_result.status, and finally we hang in vmbus_open() -> "goto error_free_info" -> vmbus_teardown_gpadl(). With this patch, we can exit gracefully on STATUS_QUOTA_EXCEEDED. Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: stable@vger.kernel.org Signed-off-by:
Dexuan Cui <decui@microsoft.com> Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
-
Yu Zhao authored
commit c1cb20d4 upstream. We changed the key of swap cache tree from swp_entry_t.val to swp_offset. We need to do so in shmem_replace_page() as well. Hugh said: "shmem_replace_page() has been wrong since the day I wrote it: good enough to work on swap "type" 0, which is all most people ever use (especially those few who need shmem_replace_page() at all), but broken once there are any non-0 swp_type bits set in the higher order bits" Link: http://lkml.kernel.org/r/20181121215442.138545-1-yuzhao@google.com Fixes: f6ab1f7f ("mm, swap: use offset of swap entry as key of swap cache") Signed-off-by:
Yu Zhao <yuzhao@google.com> Reviewed-by:
Matthew Wilcox <willy@infradead.org> Acked-by:
Hugh Dickins <hughd@google.com> Cc: <stable@vger.kernel.org> [4.9+] Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Martin Kelly authored
commit fe5192ac upstream. Currently, we enable the device before we enable the device trigger. At high frequencies, this can cause interrupts that don't yet have a poll function associated with them and are thus treated as spurious. At high frequencies with level interrupts, this can even cause an interrupt storm of repeated spurious interrupts (~100,000 on my Beagleboard with the LSM9DS1 magnetometer). If these repeat too much, the interrupt will get disabled and the device will stop functioning. To prevent these problems, enable the device prior to enabling the device trigger, and disable the divec prior to disabling the trigger. This means there's no window of time during which the device creates interrupts but we have no trigger to answer them. Fixes: 90efe055 ("iio: st_sensors: harden interrupt handling") Signed-off-by:
Martin Kelly <martin@martingkelly.com> Tested-by:
Denis Ciocca <denis.ciocca@st.com> Cc: <Stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
-
Felipe Balbi authored
commit 38317f5c upstream. This reverts commit ffb80fc6. Turns out that commit is wrong. Host controllers are allowed to use Clear Feature HALT as means to sync data toggle between host and periperal. Cc: <stable@vger.kernel.org> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Michael Niewöhner authored
commit effd14f6 upstream. Cherry G230 Stream 2.0 (G85-231) and 3.0 (G85-232) need this quirk to function correctly. This fixes a but where double pressing numlock locks up the device completely with need to replug the keyboard. Signed-off-by:
Michael Niewöhner <linux@mniewoehner.de> Tested-by:
-
Kai-Heng Feng authored
commit a84a1bcc upstream. There are two new Realtek card readers require ums-realtek to work correctly. Add the new IDs to support them. Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Josef Bacik authored
We want to release the unused reservation we have since it refills the delayed refs reserve, which will make everything go smoother when running the delayed refs if we're short on our reservation. CC: stable@vger.kernel.org # 4.4+ Reviewed-by:
Omar Sandoval <osandov@fb.com> Reviewed-by:
Liu Bo <bo.liu@linux.alibaba.com> Reviewed-by:
Nikolay Borisov <nborisov@suse.com> Signed-off-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Richard Genoud authored
commit 77e75fda upstream. of_dma_controller_free() was not called on module onloading. This lead to a soft lockup: watchdog: BUG: soft lockup - CPU#0 stuck for 23s! Modules linked in: at_hdmac [last unloaded: at_hdmac] when of_dma_request_slave_channel() tried to call ofdma->of_dma_xlate(). Cc: stable@vger.kernel.org Fixes: bbe89c8e ("at_hdmac: move to generic DMA binding") Acked-by:
Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by:
Richard Genoud <richard.genoud@gmail.com> Signed-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Richard Genoud authored
commit 98f5f932 upstream. The leak was found when opening/closing a serial port a great number of time, increasing kmalloc-32 in slabinfo. Each time the port was opened, dma_request_slave_channel() was called. Then, in at_dma_xlate(), atslave was allocated with devm_kzalloc() and never freed. (Well, it was free at module unload, but that's not what we want). So, here, kzalloc is more suited for the job since it has to be freed in atc_free_chan_resources(). Cc: stable@vger.kernel.org Fixes: bbe89c8e ("at_hdmac: move to generic DMA binding") Reported-by:
Mario Forner <m.forner@be4energy.com> Suggested-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by:
-
Pan Bian authored
commit ecebf55d upstream. The function ext2_xattr_set calls brelse(bh) to drop the reference count of bh. After that, bh may be freed. However, following brelse(bh), it reads bh->b_data via macro HDR(bh). This may result in a use-after-free bug. This patch moves brelse(bh) after reading field. CC: stable@vger.kernel.org Signed-off-by:
Pan Bian <bianpan2016@163.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Takashi Iwai authored
commit 9a20332a upstream. Some spurious calls of snd_free_pages() have been overlooked and remain in the error paths of sparc cs4231 driver code. Since runtime->dma_area is managed by the PCM core helper, we shouldn't release manually. Drop the superfluous calls. Reviewed-by:
Takashi Sakamoto <o-takashi@sakamocchi.jp> Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
commit e1a7bfe3 upstream. The procedure for adding a user control element has some window opened for race against the concurrent removal of a user element. This was caught by syzkaller, hitting a KASAN use-after-free error. This patch addresses the bug by wrapping the whole procedure to add a user control element with the card->controls_rwsem, instead of only around the increment of card->user_ctl_count. This required a slight code refactoring, too. The function snd_ctl_add() is split to two parts: a core function to add the control element and a part calling it. The former is called from the function for adding a user control element inside the controls_rwsem. One change to be noted is that snd_ctl_notify() for adding a control element gets called inside the controls_rwsem as well while it was called outside the rwsem. But this should be OK, as snd_ctl_notify() takes another (finer) rwlock instead of rwsem, and the call of snd_ctl_notify() inside rwsem is already done in another code path. Reported-by: syzbot+dc09047bce3820621ba2@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Signed-off-by:
-
Takashi Iwai authored
commit 7194eda1 upstream. The function snd_ac97_put_spsa() gets the bit shift value from the associated private_value, but it extracts too much; the current code extracts 8 bit values in bits 8-15, but this is a combination of two nibbles (bits 8-11 and bits 12-15) for left and right shifts. Due to the incorrect bits extraction, the actual shift may go beyond the 32bit value, as spotted recently by UBSAN check: UBSAN: Undefined behaviour in sound/pci/ac97/ac97_codec.c:836:7 shift exponent 68 is too large for 32-bit type 'int' This patch fixes the shift value extraction by masking the properly with 0x0f instead of 0xff. Reported-and-tested-by:
Meelis Roos <mroos@linux.ee> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Takashi Iwai authored
commit 7b691541 upstream. Some spurious calls of snd_free_pages() have been overlooked and remain in the error paths of wss driver code. Since runtime->dma_area is managed by the PCM core helper, we shouldn't release manually. Drop the superfluous calls. Reviewed-by:
-
Maximilian Heyne authored
commit 41e817bc upstream. commit e2592217 ("fs: simplify the generic_write_sync prototype") reworked callers of generic_write_sync(), and ended up dropping the error return for the directio path. Prior to that commit, in dio_complete(), an error would be bubbled up the stack, but after that commit, errors passed on to dio_complete were eaten up. This was reported on the list earlier, and a fix was proposed in https://lore.kernel.org/lkml/20160921141539.GA17898@infradead.org/, but never followed up with. We recently hit this bug in our testing where fencing io errors, which were previously erroring out with EIO, were being returned as success operations after this commit. The fix proposed on the list earlier was a little short -- it would have still called generic_write_sync() in case `ret` already contained an error. This fix ensures generic_write_sync() is only called when there's no pending error in the write. Additionally, transferred is replaced with ret to bring this code in line with other callers. Fixes: e2592217 ("fs: simplify the generic_write_sync prototype") Reported-by:
Ravi Nankani <rnankani@amazon.com> Signed-off-by:
Maximilian Heyne <mheyne@amazon.de> Reviewed-by:
Christoph Hellwig <hch@lst.de> CC: Torsten Mehlan <tomeh@amazon.de> CC: Uwe Dannowski <uwed@amazon.de> CC: Amit Shah <aams@amazon.de> CC: David Woodhouse <dwmw@amazon.co.uk> CC: stable@vger.kernel.org Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Jiri Olsa authored
commit 67266c10 upstream. Currently we check the branch tracing only by checking for the PERF_COUNT_HW_BRANCH_INSTRUCTIONS event of PERF_TYPE_HARDWARE type. But we can define the same event with the PERF_TYPE_RAW type. Changing the intel_pmu_has_bts() code to check on event's final hw config value, so both HW types are covered. Adding unlikely to intel_pmu_has_bts() condition calls, because it was used in the original code in intel_bts_constraints. Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Acked-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: <stable@vger.kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: http://lkml.kernel.org/r/20181121101612.16272-2-jolsa@kernel.orgSigned-off-by:
-
Jiri Olsa authored
commit ed6101bb upstream. Moving branch tracing setup to Intel core object into separate intel_pmu_bts_config function, because it's Intel specific. Suggested-by:
Peter Zijlstra <peterz@infradead.org> Signed-off-by:
-
Filipe Manana authored
commit f505754f upstream. We were using the path name received from user space without checking that it is null terminated. While btrfs-progs is well behaved and does proper validation and null termination, someone could call the ioctl and pass a non-null terminated patch, leading to buffer overrun problems in the kernel. The ioctl is protected by CAP_SYS_ADMIN. So just set the last byte of the path to a null character, similar to what we do in other ioctls (add/remove/resize device, snapshot creation, etc). CC: stable@vger.kernel.org # 4.4+ Reviewed-by:
Anand Jain <anand.jain@oracle.com> Signed-off-by:
Filipe Manana <fdmanana@suse.com> Reviewed-by:
-
Max Filippov authored
commit 03bc996a upstream. Coprocessor context offsets are used by the assembly code that moves coprocessor context between the individual fields of the thread_info::xtregs_cp structure and coprocessor registers. This fixes coprocessor context clobbering on flushing and reloading during normal user code execution and user process debugging in the presence of more than one coprocessor in the core configuration. Cc: stable@vger.kernel.org Signed-off-by:
Max Filippov <jcmvbkbc@gmail.com> Signed-off-by:
-
Max Filippov authored
commit 2958b666 upstream. coprocessor_flush_all may be called from a context of a thread that is different from the thread being flushed. In that case contents of the cpenable special register may not match ti->cpenable of the target thread, resulting in unhandled coprocessor exception in the kernel context. Set cpenable special register to the ti->cpenable of the target register for the duration of the flush and restore it afterwards. This fixes the following crash caused by coprocessor register inspection in native gdb: (gdb) p/x $w0 Illegal instruction in kernel: sig: 9 [#1] PREEMPT Call Trace: ___might_sleep+0x184/0x1a4 __might_sleep+0x41/0xac exit_signals+0x14/0x218 do_exit+0xc9/0x8b8 die+0x99/0xa0 do_illegal_instruction+0x18/0x6c common_exception+0x77/0x77 coprocessor_flush+0x16/0x3c arch_ptrace+0x46c/0x674 sys_ptrace+0x2ce/0x3b4 system_call+0x54/0x80 common_exception+0x77/0x77 note: gdb[100] exited with preempt_count 1 Killed Cc: stable@vger.kernel.org Signed-off-by:
-
Wanpeng Li authored
commit e97f852f upstream. Reported by syzkaller: BUG: unable to handle kernel NULL pointer dereference at 00000000000001c8 PGD 80000003ec4da067 P4D 80000003ec4da067 PUD 3f7bfa067 PMD 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 7 PID: 5059 Comm: debug Tainted: G OE 4.19.0-rc5 #16 RIP: 0010:__lock_acquire+0x1a6/0x1990 Call Trace: lock_acquire+0xdb/0x210 _raw_spin_lock+0x38/0x70 kvm_ioapic_scan_entry+0x3e/0x110 [kvm] vcpu_enter_guest+0x167e/0x1910 [kvm] kvm_arch_vcpu_ioctl_run+0x35c/0x610 [kvm] kvm_vcpu_ioctl+0x3e9/0x6d0 [kvm] do_vfs_ioctl+0xa5/0x690 ksys_ioctl+0x6d/0x80 __x64_sys_ioctl+0x1a/0x20 do_syscall_64+0x83/0x6e0 entry_SYSCALL_64_after_hwframe+0x49/0xbe The reason is that the testcase writes hyperv synic HV_X64_MSR_SINT6 msr and triggers scan ioapic logic to load synic vectors into EOI exit bitmap. However, irqchip is not initialized by this simple testcase, ioapic/apic objects should not be accessed. This can be triggered by the following program: #define _GNU_SOURCE #include <endian.h> #include <stdint.h> #include <stdio.h> #include <stdlib.h> #include <string.h> #include <sys/syscall.h> #include <sys/types.h> #include <unistd.h> uint64_t r[3] = {0xffffffffffffffff, 0xffffffffffffffff, 0xffffffffffffffff}; int main(void) { syscall(__NR_mmap, 0x20000000, 0x1000000, 3, 0x32, -1, 0); long res = 0; memcpy((void*)0x20000040, "/dev/kvm", 9); res = syscall(__NR_openat, 0xffffffffffffff9c, 0x20000040, 0, 0); if (res != -1) r[0] = res; res = syscall(__NR_ioctl, r[0], 0xae01, 0); if (res != -1) r[1] = res; res = syscall(__NR_ioctl, r[1], 0xae41, 0); if (res != -1) r[2] = res; memcpy( (void*)0x20000080, "\x01\x00\x00\x00\x00\x5b\x61\xbb\x96\x00\x00\x40\x00\x00\x00\x00\x01\x00" "\x08\x00\x00\x00\x00\x00\x0b\x77\xd1\x78\x4d\xd8\x3a\xed\xb1\x5c\x2e\x43" "\xaa\x43\x39\xd6\xff\xf5\xf0\xa8\x98\xf2\x3e\x37\x29\x89\xde\x88\xc6\x33" "\xfc\x2a\xdb\xb7\xe1\x4c\xac\x28\x61\x7b\x9c\xa9\xbc\x0d\xa0\x63\xfe\xfe" "\xe8\x75\xde\xdd\x19\x38\xdc\x34\xf5\xec\x05\xfd\xeb\x5d\xed\x2e\xaf\x22" "\xfa\xab\xb7\xe4\x42\x67\xd0\xaf\x06\x1c\x6a\x35\x67\x10\x55\xcb", 106); syscall(__NR_ioctl, r[2], 0x4008ae89, 0x20000080); syscall(__NR_ioctl, r[2], 0xae80, 0); return 0; } This patch fixes it by bailing out scan ioapic if ioapic is not initialized in kernel. Reported-by:
Wei Wu <ww9210@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Wei Wu <ww9210@gmail.com> Signed-off-by:
Wanpeng Li <wanpengli@tencent.com> Cc: stable@vger.kernel.org Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Jim Mattson authored
commit fd65d314 upstream. Previously, we only called indirect_branch_prediction_barrier on the logical CPU that freed a vmcb. This function should be called on all logical CPUs that last loaded the vmcb in question. Fixes: 15d45071 ("KVM/x86: Add IBPB support") Reported-by:
Neel Natu <neelnatu@google.com> Signed-off-by:
Jim Mattson <jmattson@google.com> Reviewed-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Junaid Shahid authored
commit 0e0fee5c upstream. When a guest page table is updated via an emulated write, kvm_mmu_pte_write() is called to update the shadow PTE using the just written guest PTE value. But if two emulated guest PTE writes happened concurrently, it is possible that the guest PTE and the shadow PTE end up being out of sync. Emulated writes do not mark the shadow page as unsync-ed, so this inconsistency will not be resolved even by a guest TLB flush (unless the page was marked as unsync-ed at some other point). This is fixed by re-reading the current value of the guest PTE after the MMU lock has been acquired instead of just using the value that was written prior to calling kvm_mmu_pte_write(). Signed-off-by:
Junaid Shahid <junaids@google.com> Reviewed-by:
-
