Boolean properties in DT are present or not present and don't take a value.
A property such as 'foo = <0>;' evaluated to true. IOW, the value doesn't
matter.

It may have been intended that 0 values are false, but there is no change
in behavior with this patch.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Krzysztof Kozlowski <krzk+dt@kernel.org>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Claudiu Beznea <claudiu.beznea@microchip.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: "Benoît Cousson" <bcousson@baylibre.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-omap@vger.kernel.org
Cc: linux-arm-msm@vger.kernel.org
Link: https://lore.kernel.org/r/20220407225107.2175958-1-robh@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'ux500-defconfig-soc-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/fixes

Defconfig updates for kernel v5.18:

- Refresh defconfig with new and moved options
- Add some new hardware drivers
- Activate battery charging

* tag 'ux500-defconfig-soc-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
  ARM: config: u8500: Re-enable AB8500 battery charging
  ARM: config: u8500: Add some common hardware
  ARM: config: Refresh U8500 defconfig

Link: https://lore.kernel.org/r/CACRpkdY+_Go4XNzOh+Rvc24QBnUud2k-S7VQuaH5d-j71_dJog@mail.gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Reset controller fixes for v5.18

Document the deprecated 'hisi,rst-syscon' device tree property for
hisilicon,hi3660-reset, add an error check to reset deassertion in
reset-rzg2l-usbphy-ctrl, restore transfer error handling in Tegra
reset-bpmp, and document the optional 'resets' device tree property
for socionext,uniphier-reset.

* tag 'reset-fixes-for-v5.18' of git://git.pengutronix.de/pza/linux:
  dt-bindings: reset: Add parent "resets" property as optional
  reset: tegra-bpmp: Restore Handle errors in BPMP response
  reset: renesas: Check return value of reset_control_deassert()
  dt-bindings: reset: document deprecated HiSilicon property

Link: https://lore.kernel.org/r/20220406153337.1265414-1-p.zabel@pengutronix.deSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Boolean properties in DT are present or not present and don't take a value.
A property such as 'foo = <0>;' evaluated to true. IOW, the value doesn't
matter.

It may have been intended that 0 values are false, but there is no change
in behavior with this patch.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/Yk3m92Sj26/v1mLG@robh.at.kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The common touchscreen properties are all 32-bit, not 16-bit. These
properties must not be too important as they are all ignored in case of an
error reading them.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/Yk3moe6Hz8ELM0iS@robh.at.kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Boolean properties in DT are present or not present and don't take a value.
A property such as 'foo = <0>;' evaluated to true. IOW, the value doesn't
matter.

It may have been intended that 0 values are false, but there is no change
in behavior with this patch.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/Yk3mR5yae3gCkKhp@robh.at.kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Boolean properties in DT are present or not present and don't take a value.
A property such as 'foo = <0>;' evaluated to true. IOW, the value doesn't
matter.

It may have been intended that 0 values are false, but there is no change
in behavior with this patch.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/Yk3nShkFzNJaI3/Z@robh.at.kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Boolean properties in DT are present or not present and don't take a value.
A property such as 'foo = <0>;' evaluated to true. IOW, the value doesn't
matter.

It may have been intended that 0 values are false, but there is no change
in behavior with this patch.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/Yk3leykDEKGBN8rk@robh.at.kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Missed the defconfig when removing the board files causing
failures in builds using this defconfig.

Fixes: 28f74201 ("ARM: pxa: remove Intel Imote2 and Stargate 2 boards")
Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220405135252.10283-1-Jonathan.Cameron@huawei.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'memory-controller-drv-fixes-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into arm/fixes

Memory controller drivers - fixes for v5.18

Issues in v5.18:
1. Freescale/NXP: fix populating children of Integrated Flash Controller
   DT nodes.

Issues existing before:
1. Renesas: fix platform-device leak in probe's error path.
2. Atmel: fix of_node reference leak in probe's error path.
3. Synopsys: correct the bindings for snps,ddrc-3.80a (interrupts are
   required).

* tag 'memory-controller-drv-fixes-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
  memory: fsl_ifc: populate child nodes of buses and mfd devices
  dt-bindings: memory: snps,ddrc-3.80a compatible also need interrupts
  memory: atmel-ebi: Fix missing of_node_put in atmel_ebi_probe
  memory: renesas-rpc-if: fix platform-device leak in error path

Link: https://lore.kernel.org/r/20220407081448.113208-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'samsung-fixes-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/fixes

Samsung fixes for v5.18

Update Krzysztof Kozlowski's email address in multiple maintainer
entries.  The old one @canonical.com bounces already.

* tag 'samsung-fixes-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  MAINTAINERS: update Krzysztof Kozlowski's email to Linaro
  dt-bindings: update Krzysztof Kozlowski's email

Link: https://lore.kernel.org/r/20220407080545.112290-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'vexpress-fixes-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes

ARM Vexpress fixes for 5.18

Couple of fixes to address negative array index access and kernel-doc
build warnings.

* tag 'vexpress-fixes-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
  ARM: vexpress/spc: Fix all the kernel-doc build warnings
  ARM: vexpress/spc: Fix kernel-doc build warning for ve_spc_cpu_in_wfi
  ARM: vexpress/spc: Avoid negative array index when !SMP

Link: https://lore.kernel.org/r/20220407110828.1436206-1-sudeep.holla@arm.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'scmi-fixes-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes

Arm SCMI firmware interface fixes for v5.18

Few fixes to address assorted set of issues:
- Erroneous clearing of Tx channel which only platform firmware must do
- Invalid point access pass as parameter to sort() in clock support
- Sparse build warnings in OPTEE transport driver
- Use of deprecated zero-length arrays

* tag 'scmi-fixes-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
  firmware: arm_scmi: Fix sparse warnings in OPTEE transport driver
  firmware: arm_scmi: Replace zero-length array with flexible-array member
  firmware: arm_scmi: Fix sorting of retrieved clock rates
  firmware: arm_scmi: Remove clear channel call on the TX channel

Link: https://lore.kernel.org/r/20220407110818.1436181-1-sudeep.holla@arm.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Fix sparse warning:
arch/arm/mach-ep93xx/clock.c:210:35: sparse: sparse: Using plain integer as NULL pointer
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org/thread/TLFJ6D7WGMDJSQ6XK7UZE4XR2PLRZJSV/Signed-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm/mach-ep93xx/clock.c:154:2: warning: Use of memory after it is freed [clang-analyzer-unix.Malloc]
arch/arm/mach-ep93xx/clock.c:151:2: note: Taking true branch
if (IS_ERR(clk))
^
arch/arm/mach-ep93xx/clock.c:152:3: note: Memory is released
kfree(psc);
^~~~~~~~~~
arch/arm/mach-ep93xx/clock.c:154:2: note: Use of memory after it is freed
return &psc->hw;
^ ~~~~~~~~

Fixes: 9645ccc7 ("ep93xx: clock: convert in-place to COMMON_CLK")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org/thread/B5YCO2NJEXINCYE26Y255LCVMO55BGWW/Signed-off-by: Arnd Bergmann <arnd@arndb.de>

There are more kernel-doc build warnings as below than the ones reported
by kernel test robot recently for this file.

  |  arch/arm/mach-vexpress/spc.c:125: warning: missing initial short description on line:
  |   * ve_spc_global_wakeup_irq()
  |  arch/arm/mach-vexpress/spc.c:131: warning: contents before sections
  |  arch/arm/mach-vexpress/spc.c:148: warning: missing initial short description on line:
  |   * ve_spc_cpu_wakeup_irq()
  |  arch/arm/mach-vexpress/spc.c:154: warning: contents before sections
  |  arch/arm/mach-vexpress/spc.c:203: warning: missing initial short description on line:
  |   * ve_spc_powerdown()
  |  arch/arm/mach-vexpress/spc.c:209: warning: contents before sections
  |  arch/arm/mach-vexpress/spc.c:231: warning: missing initial short description on line:
  |   * ve_spc_cpu_in_wfi()
  |  7 warnings

Fix all these warnings.

Link: https://lore.kernel.org/r/20220404130207.1162445-2-sudeep.holla@arm.com
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

Kbuild bot reported the following kernel-doc build warning:

  |  arch/arm/mach-versatile/spc.c:231: warning: This comment starts with
  |		'/**', but isn't a kernel-doc comment.
  |		Refer Documentation/doc-guide/kernel-doc.rst
  |  		* ve_spc_cpu_in_wfi(u32 cpu, u32 cluster)

Fix the issue by dropping the parameters specified in the kernel doc.

Link: https://lore.kernel.org/linux-doc/202204031026.4ogKxt89-lkp@intel.com
Link: https://lore.kernel.org/r/20220404130207.1162445-1-sudeep.holla@arm.com
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

This is effectively a revert of the temporary disablement
patch. Battery charging now works!

We also enable static battery data for the Samsung SDI
batteries as used by the U8500 Samsung phones.

Cc: Lee Jones <lee.jones@linaro.org>
Fixes: a1149ae9 ("ARM: ux500: Disable Power Supply and Battery Management by default")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

This activates display drivers that give console on the
different U8500 mobile phones, the GNSS subsystem and the
SIRF GNSS driver so we can manage the GPS chips, the regulator
LEDs as used in some phones and one more IIO light sensor driver.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Commit 3e25f800 ("memory: fsl_ifc: populate child devices without
relying on simple-bus") was trying to replace the "simple-bus"
compatible with explicit bus populate in the driver.  But
of_platform_populate() only populates child nodes of ifc without
populating child buses and child mfd devices residing under ifc.  Change
it to of_platform_default_populate() to fix the problem.

Fixes: 3e25f800 ("memory: fsl_ifc: populate child devices without relying on simple-bus")
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Link: https://lore.kernel.org/r/20220307204118.19093-1-leoyang.li@nxp.comSigned-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

This just updates the U8500 defconfig to reflect what has
happened in the Kconfig: DRM_PANEL_SONY_ACX424AKP is now
handled by DRM_PANEL_NOVATEK_NT35560, all ST sensors have
SPI version drivers that we don't use, and some debug
options moved around.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

The sparse checker complains about converting pointers between address
spaces.  We correctly stored an __iomem pointer in struct scmi_optee_channel,
but discarded the __iomem when returning it from get_channel_shm, causing one
warning. Then we passed the non-__iomem pointer return from get_channel_shm
at two other places, where an __iomem pointer is expected, causing couple of
other warnings

Add the appropriate __iomem annotations at all places where it is missing.

optee.c:414:20: warning: incorrect type in return expression (different address spaces)
optee.c:414:20:    expected struct scmi_shared_mem *
optee.c:414:20:    got struct scmi_shared_mem [noderef] __iomem *shmem
optee.c:426:26: warning: incorrect type in argument 1 (different address spaces)
optee.c:426:26:    expected struct scmi_shared_mem [noderef] __iomem *shmem
optee.c:426:26:    got struct scmi_shared_mem *shmem
optee.c:441:30: warning: incorrect type in argument 1 (different address spaces)
optee.c:441:30:    expected struct scmi_shared_mem [noderef] __iomem *shmem
optee.c:441:30:    got struct scmi_shared_mem *shmem

Link: https://lore.kernel.org/r/20220404102419.1159705-1-sudeep.holla@arm.com
Cc: Etienne Carriere <etienne.carriere@linaro.org>
Cc: Cristian Marussi <cristian.marussi@arm.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

There is a regular need in the kernel to provide a way to declare
having a dynamically sized set of trailing elements in a structure.
Kernel code should always use “flexible array members”[1] for these
cases. The older style of one-element or zero-length arrays should
no longer be used[2].

[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.16/process/deprecated.html#zero-length-and-one-element-arrays

Link: https://lore.kernel.org/r/20220401075537.2407376-1-lv.ruyi@zte.com.cnReported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

During SCMI Clock protocol initialization, after having retrieved from the
SCMI platform all the available discrete rates for a specific clock, the
clock rates array is sorted, unfortunately using a pointer to its end as
a base instead of its start, so that sorting does not work.

Fix invocation of sort() passing as base a pointer to the start of the
retrieved clock rates array.

Link: https://lore.kernel.org/r/20220318092813.49283-1-cristian.marussi@arm.com
Fixes: dccec73d ("firmware: arm_scmi: Keep the discrete clock rates sorted")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

For the snps,ddrc-3.80a compatible, the interrupts property is also
required, also order the compatibles by name (s goes before x).
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Fixes: a9e6b381 ("dt-bindings: memory: Add entry for version 3.80a")
Link: https://lore.kernel.org/r/20220321075131.17811-2-sherry.sun@nxp.comSigned-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

The device_node pointer is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.

Fixes: 87108dc7 ("memory: atmel-ebi: Enable the SMC clock if specified")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220309110144.22412-1-linmq006@gmail.comSigned-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Make sure to free the flash platform device in the event that
registration fails during probe.

Fixes: ca7d8b98 ("memory: add Renesas RPC-IF driver")
Cc: stable@vger.kernel.org      # 5.8
Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20220303180632.3194-1-johan@kernel.orgSigned-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Building with 'make W=1' shows a warning about a missing prototype:

arch/arm/mach-iop32x/cp6.c:10:6: warning: no previous prototype for 'iop_enable_cp6' [-Wmissing-prototypes]

Include the header that contains the declaration.

Fixes: 6f5d248d ("ARM: iop32x: use GENERIC_IRQ_MULTI_HANDLER")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

With newer versions of GCC, there is a panic in da850_evm_config_emac()
when booting multi_v5_defconfig in QEMU under the palmetto-bmc machine:

Unable to handle kernel NULL pointer dereference at virtual address 00000020
pgd = (ptrval)
[00000020] *pgd=00000000
Internal error: Oops: 5 [#1] PREEMPT ARM
Modules linked in:
CPU: 0 PID: 1 Comm: swapper Not tainted 5.15.0 #1
Hardware name: Generic DT based system
PC is at da850_evm_config_emac+0x1c/0x120
LR is at do_one_initcall+0x50/0x1e0

The emac_pdata pointer in soc_info is NULL because davinci_soc_info only
gets populated on davinci machines but da850_evm_config_emac() is called
on all machines via device_initcall().

Move the rmii_en assignment below the machine check so that it is only
dereferenced when running on a supported SoC.

Fixes: bae10587 ("davinci: DA850/OMAP-L138 EVM: implement autodetect of RMII PHY")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Bartosz Golaszewski <brgl@bgdev.pl>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/YcS4xVWs6bQlQSPC@archlinux-ax161/Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Use Krzysztof Kozlowski's @linaro.org account in maintainer entries.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20220330074016.12896-3-krzysztof.kozlowski@linaro.org

Krzysztof Kozlowski's @canonical.com email stopped working, so switch to
generic @kernel.org account for all Devicetree bindings.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20220330074016.12896-2-krzysztof.kozlowski@linaro.org

LD11 mio reset controller has a reset lines from system controller.
Add parent "resets" property to fix the following warning.

  uniphier-ld11-global.dt.yaml: reset: 'resets' does not match any of the regexes: 'pinctrl-[0-9]+'
      From schema: Documentation/devicetree/bindings/reset/socionext,uniphier-reset.yaml
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/1648617078-8312-1-git-send-email-hayashi.kunihiko@socionext.com

This reverts following commit 69125b4b ("reset: tegra-bpmp: Revert
Handle errors in BPMP response").

The Tegra194 HDA reset failure is fixed by commit d278dc91 ("ALSA:
hda/tegra: Fix Tegra194 HDA reset failure"). The temporary revert of
original commit c045ceb5 ("reset: tegra-bpmp: Handle errors in BPMP
response") can be removed now.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/1641995806-15245-1-git-send-email-spujar@nvidia.com

Deasserting the reset is vital, therefore bail out in case of error.
Suggested-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/b2131908-0110-006b-862f-080517f3e2d8@gmail.comSigned-off-by: Philipp Zabel <p.zabel@pengutronix.de>

Documenting deprecated property prevents dt-schema validation errors.
Signed-off-by: David Heidelberg <david@ixit.cz>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211208184149.99537-1-david@ixit.czSigned-off-by: Philipp Zabel <p.zabel@pengutronix.de>

When building multi_v7_defconfig+CONFIG_SMP=n, -Warray-bounds exposes
a couple negative array index accesses:

arch/arm/mach-vexpress/spc.c: In function 've_spc_clk_init':
arch/arm/mach-vexpress/spc.c:583:21: warning: array subscript -1 is below array bounds of 'bool[2]' {aka '_Bool[2]'} [-Warray-bounds]
  583 |   if (init_opp_table[cluster])
      |       ~~~~~~~~~~~~~~^~~~~~~~~
arch/arm/mach-vexpress/spc.c:556:7: note: while referencing 'init_opp_table'
  556 |  bool init_opp_table[MAX_CLUSTERS] = { false };
      |       ^~~~~~~~~~~~~~
arch/arm/mach-vexpress/spc.c:592:18: warning: array subscript -1 is below array bounds of 'bool[2]' {aka '_Bool[2]'} [-Warray-bounds]
  592 |    init_opp_table[cluster] = true;
      |    ~~~~~~~~~~~~~~^~~~~~~~~
arch/arm/mach-vexpress/spc.c:556:7: note: while referencing 'init_opp_table'
  556 |  bool init_opp_table[MAX_CLUSTERS] = { false };
      |       ^~~~~~~~~~~~~~

Skip this logic when built !SMP.

Link: https://lore.kernel.org/r/20220331190443.851661-1-keescook@chromium.org
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

On SCMI transports whose channels are based on a shared resource the TX
channel area has to be acquired by the agent before placing the desired
command into the channel and it will be then relinquished by the platform
once the related reply has been made available into the channel.
On an RX channel the logic is reversed with the platform acquiring the
channel area and the agent reliquishing it once done by calling the
scmi_clear_channel() helper.

As a consequence, even in case of error, the agent must never try to clear
a TX channel from its side: restrict the existing clear channel call on the
the reply path only to delayed responses since they are indeed coming from
the RX channel.

Link: https://lore.kernel.org/r/20220224152404.12877-1-cristian.marussi@arm.com
Fixes: e9b21c96 ("firmware: arm_scmi: Make .clear_channel optional")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

Pull more tracing updates from Steven Rostedt:

 - Rename the staging files to give them some meaning. Just
   stage1,stag2,etc, does not show what they are for

 - Check for NULL from allocation in bootconfig

 - Hold event mutex for dyn_event call in user events

 - Mark user events to broken (to work on the API)

 - Remove eBPF updates from user events

 - Remove user events from uapi header to keep it from being installed.

 - Move ftrace_graph_is_dead() into inline as it is called from hot
   paths and also convert it into a static branch.

* tag 'trace-v5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Move user_events.h temporarily out of include/uapi
  ftrace: Make ftrace_graph_is_dead() a static branch
  tracing: Set user_events to BROKEN
  tracing/user_events: Remove eBPF interfaces
  tracing/user_events: Hold event_mutex during dyn_event_add
  proc: bootconfig: Add null pointer check
  tracing: Rename the staging files for trace_events

Pull clk fix from Stephen Boyd:
 "A single revert to fix a boot regression seen when clk_put() started
  dropping rate range requests. It's best to keep various systems
  booting so we'll kick this out and try again next time"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  Revert "clk: Drop the rate range on clk_put()"