* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6:
  ext3: update ctime when changing the file's permission by setfacl
  ext2: update ctime when changing the file's permission by setfacl

* 'virtio' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6:
  virtio-pci: disable msi at startup
  virtio: return ENOMEM on out of memory

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  PCI/PM: Do not use native PCIe PME by default

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: usb/endpoint, fix dangling pointer use
  ALSA: asihpi - Get rid of incorrect "long" types and casts.
  ASoC: DaVinci: Fix McASP hardware FIFO configuration
  ALSA: hda - Fix line-in for mb5 model MacBook (Pro) 5,1 / 5,2
  ALSA: usb-audio: fix UAC2 control value queries
  ALSA: usb-audio: parse UAC2 sample rate ranges correctly
  ALSA: usb-audio: fix control messages for USB_RECIP_INTERFACE
  ALSA: usb-audio: add check for faulty clock in parse_audio_format_rates_v2()
  ALSA: hda - Don't check capture source mixer if no ADC is available

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  hwmon: (k8temp) Bypass core swapping on single-core processors
  hwmon: (i5k_amb) Fix sysfs attribute for lockdep
  hwmon: (k10temp) Do not blacklist known working CPU models

* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  watchdog: at32ap700x_wdt: register misc device last in probe() function
  watchdog: [PATCH 3/3] imx2_wdt: fix section mismatch

* git://git.infradead.org/iommu-2.6:
  intel-iommu: Force-disable IOMMU for iGFX on broken Cantiga revisions.
  intel-iommu: Fix double lock in get_domain_for_dev()
  intel-iommu: Fix reference by physical address in intel_iommu_attach_device()

* 'for-linus' of git://gitorious.org/linux-omap-dss2/linux:
  OMAP: OMAPFB: fix rfbi.c compile error
  OMAPFB: LCDC: change update_mode to DISABLED when going suspend

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  MAINTAINERS: change mailing list address for CIFS
  cifs: remove bogus first_time check in NTLMv2 session setup code
  cifs: don't call cifs_new_fileinfo unless cifs_open succeeds
  cifs: don't ignore cifs_posix_open_inode_helper return value
  cifs: clean up arguments to cifs_open_inode_helper
  cifs: pass instantiated filp back after open call
  cifs: move cifs_new_fileinfo call out of cifs_posix_open
  cifs: implement drop_inode superblock op
  cifs: don't attempt busy-file rename unless it's in same directory

* 'merge' of git://git.secretlab.ca/git/linux-2.6:
  powerpc/5200: fix lite5200 ethernet phy address
  powerpc/5200: Fix build error in sound code.
  powerpc/5200: fix oops during going to standby
  powerpc/5200: add lite5200 onboard I2C eeprom and flash
  maintainers: Add git trees for SPI and device tree
  of: Drop properties with "/" in their name

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha-2.6:
  alpha: Fix de2104x driver failing to readout MAC address correctly
  alpha: Detect Super IO chip, no IDE on Avanti, enable EPP19
  alpha: fix pci_mmap_resource API breakage
  alpha: fix __arch_hweight32 typo

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc: Fix mpic_resume on early G5 macs
  powerpc: rtas_flash needs to use rtas_data_buf
  powerpc: Unconditionally enabled irq stacks
  powerpc/kexec: Wait for online/possible CPUs only.
  powerpc: Disable CONFIG_SYSFS_DEPRECATED
  powerpc/boot: Remove addRamdisk.c since it is now unused
  powerpc: Move kdump default base address to 64MB on 64bit
  powerpc: Remove dead CONFIG_HIGHPTE
  powerpc/fsl-booke: Move loadcam_entry back to asm code to fix SMP ftrace
  powerpc/fsl-booke: Fix InstructionTLBError execute permission check

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
  TPM: ReadPubEK output struct fix

* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
  kbuild: fix LOCALVERSION handling to match description
  kbuild: Fix modpost segfault

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  ACPI / PM: Do not enable GPEs for system wakeup in advance
  ACPICA: Truncate I/O addresses to 16 bits for Windows compatibility
  ACPICA: Limit maximum time for Sleep() operator
  ACPICA: Fix namestring associated with AE_NO_HANDLER exception
  ACPI / ACPICA: Fix sysfs GPE interface
  ACPI / ACPICA: Fix GPE initialization
  ACPI / ACPICA: Avoid writing full enable masks to GPE registers
  ACPI / ACPICA: Fix low-level GPE manipulation code
  ACPI / ACPICA: Use helper function for computing GPE masks
  ACPI / ACPICA: Do not attempt to disable GPE when installing handler
  ACPI: Disable Vista compatibility for Sony VGN-NS50B_L
  ACPI: fan: fix unbalanced code block
  ACPI: Store NVS state even when entering suspend to RAM
  suspend: Move NVS save/restore code to generic suspend functionality
  ACPI: Do not try to set up acpi processor stuff on cores exceeding maxcpus=
  ACPI: acpi_pad: Don't needlessly mark LAPIC unstable

This is from a Smatch check I'm writing.

strncpy_from_user() returns -EFAULT on error so the first change just
silences a warning but doesn't change how the code works.

The other change is a bug fix because install_thread_keyring_to_cred()
can return a variety of errors such as -EINVAL, -EEXIST, -ENOMEM or
-EKEYREVOKED.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ext3 didn't update the ctime of the file when its permission was changed.

Steps to reproduce:
 # touch aaa
 # stat -c %Z aaa
 1275289822
 # setfacl -m  'u::x,g::x,o::x' aaa
 # stat -c %Z aaa
 1275289822				<- unchanged

But, according to the spec of the ctime, ext3 must update it.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Jan Kara <jack@suse.cz>

ext2 didn't update the ctime of the file when its permission was changed.

Steps to reproduce:
 # touch aaa
 # stat -c %Z aaa
 1275289822
 # setfacl -m  'u::x,g::x,o::x' aaa
 # stat -c %Z aaa
 1275289822                         <- unchanged

But, according to the spec of the ctime, ext2 must update it.

Port of ext3 patch by Miao Xie <miaox@cn.fujitsu.com>.
Signed-off-by: Jan Kara <jack@suse.cz>

We're moving the mailing list to linux-cifs@vger.kernel.org.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>

virtio-pci resets the device at startup by writing to the status
register, but this does not clear the pci config space,
specifically msi enable status which affects register
layout.

This breaks things like kdump when they try to use e.g. virtio-blk.

Fix by forcing msi off at startup. Since pci.c already has
a routine to do this, we export and use it instead of duplicating code.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: linux-pci@vger.kernel.org
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: stable@kernel.org

add_buf returns ring size on out of memory,
this is not what devices expect.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: stable@kernel.org # .34.x

Stanse found that in snd_usb_parse_audio_endpoints, there is a
dangling pointer dereference. When snd_usb_parse_audio_format fails,
fp is freed, and continue invoked. On the next loop, there is
"fp && fp->altsetting == 1 && fp->channels == 1" test, but fp is set
from the last iteration (but is bogus) and thus ilegally dereferenced.

Set fp to NULL before "continue".
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Commit a2e066bb introduced core
swapping for CPU models 64 and later. I recently had a report about
a Sempron 3200+, model 95, for which this patch broke temperature
reading. It happens that this is a single-core processor, so the
effect of the swapping was to read a temperature value for a core
that didn't exist, leading to an incorrect value (-49 degrees C.)

Disabling core swapping on singe-core processors should fix this.

Additional comment from Andreas:

The BKDG says

  Thermal Sensor Core Select (ThermSenseCoreSel)-Bit 2. This bit
  selects the CPU whose temperature is reported in the CurTemp
  field. This bit only applies to dual core processors. For
  single core processors CPU0 Thermal Sensor is always selected.

k8temp_probe() correctly detected that SEL_CORE can't be used on single
core CPU. Thus k8temp did never update the temperature values stored
in temp[1][x] and -49 degrees was reported. For single core CPUs we
must use the values read into temp[0][x].
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Rick Moritz <rhavin@gmx.net>
Acked-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: stable@kernel.org

i5k_amb.ko uses dynamically allocated memory (by kmalloc) for
attributes passed to sysfs. So, sysfs_attr_init() should be called
for working happy with lockdep.
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: stable@kernel.org [2.6.34 only]

When detecting AM2+ or AM3 socket with DDR2, only blacklist cores
which are known to exist in AM2+ format.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Cc: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: stable@kernel.org

Commit c7f48656
(PCI PM: PCIe PME root port service driver) causes the native PCIe
PME signaling to be used by default, if the BIOS allows the kernel to
control the standard configuration registers of PCIe root ports.
However, the native PCIe PME is coupled to the native PCIe hotplug
and calling pcie_pme_acpi_setup() makes some BIOSes expect that
the native PCIe hotplug will be used as well.  That, in turn, causes
problems to appear on systems where the PCIe hotplug driver is not
loaded.  The usual symptom, as reported by Jaroslav Kameník and
others, is that the ACPI GPE associated with PCIe hotplug keeps
firing continuously causing kacpid to take substantial percentage
of CPU time.

To work around this issue, change the default so that the native
PCIe PME signaling is only used if directly requested with the help
of the pcie_pme= command line switch.

Fixes https://bugzilla.kernel.org/show_bug.cgi?id=15924 , which is
a listed regression from 2.6.33.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Reported-by: Jaroslav Kameník <jaroslav@kamenik.cz>
Tested-by: Antoni Grzymala <antekgrzymala@gmail.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

After commit 9630bdd9
(ACPI: Use GPE reference counting to support shared GPEs) the wakeup
enable mask bits of GPEs are set as soon as the GPEs are enabled to
wake up the system.  Unfortunately, this leads to a regression
reported by Michal Hocko, where a system is woken up from ACPI S5 by
a device that is not supposed to do that, because the wakeup enable
mask bit of this device's GPE is always set when
acpi_enter_sleep_state() calls acpi_hw_enable_all_wakeup_gpes(),
although it should only be set if the device is supposed to wake up
the system from the target state.

To work around this issue, rework the ACPI power management code so
that GPEs are not enabled to wake up the system upfront, but only
during a system state transition when the target state of the system
is known.  [Of course, this means that the reference counting of
"wakeup" GPEs doesn't really make sense and it is sufficient to
set/unset the wakeup mask bits for them during system sleep
transitions.  This will allow us to simplify the GPE handling code
quite a bit, but that change is too intrusive for 2.6.35.]

Fixes https://bugzilla.kernel.org/show_bug.cgi?id=15951Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Reported-and-tested-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Len Brown <len.brown@intel.com>

This patch reworks the probe() function in the at32ap700x_wdt driver, this to
make sure the miscdev is properly initialized and the driver is ready to be
accessed.
Reported-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Signed-off-by: Wim Van sebroeck <wim@iguana.be>

These give incorrect results for index wrap on 64 bit.
Signed-off-by: Eliot Blennerhassett <eblennerhassett@audioscience.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This bug appears to be the result of a cut-and-paste mistake from the
NTLMv1 code. The function to generate the MAC key was commented out, but
not the conditional above it. The conditional then ended up causing the
session setup key not to be copied to the buffer unless this was the
first session on the socket, and that made all but the first NTLMv2
session setup fail.

Fix this by removing the conditional and all of the commented clutter
that made it difficult to see.

Cc: Stable <stable@kernel.org>
Reported-by: Gunther Deschner <gdeschne@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>

It's currently possible for cifs_open to fail after it has already
called cifs_new_fileinfo. In that situation, the new fileinfo will be
leaked as the caller doesn't call fput. That in turn leads to a busy
inodes after umount problem since the fileinfo holds an extra inode
reference now. Shuffle cifs_open around a bit so that it only calls
cifs_new_fileinfo if it's going to succeed.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-and-Tested-by: Suresh Jayaraman <sjayaraman@suse.de>

...and ensure that we propagate the error back to avoid any surprises.
Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de>
Reviewed-and-Tested-by: Jeff Layton <jlayton@redhat.com>

...which takes a ton of unneeded arguments and does a lot more pointer
dereferencing than is really needed.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-and-Tested-by: Suresh Jayaraman <sjayaraman@suse.de>

The current scheme of sticking open files on a list and assuming that
cifs_open will scoop them off of it is broken and leads to "Busy
inodes after umount..." errors at unmount time.

The problem is that there is no guarantee that cifs_open will always
be called after a ->lookup or ->create operation. If there are
permissions or other problems, then it's quite likely that it *won't*
be called.

Fix this by fully instantiating the filp whenever the file is created
and pass that filp back to the VFS. If there is a problem, the VFS
can clean up the references.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-and-Tested-by: Suresh Jayaraman <sjayaraman@suse.de>

Having cifs_posix_open call cifs_new_fileinfo is problematic and
inconsistent with how "regular" opens work. It's also buggy as
cifs_reopen_file calls this function on a reconnect, which creates a new
struct cifsFileInfo that just gets leaked.

Push it out into the callers. This also allows us to get rid of the
"mnt" arg to cifs_posix_open.

Finally, in the event that a cifsFileInfo isn't or can't be created, we
always want to close the filehandle out on the server as the client
won't have a record of the filehandle and can't actually use it. Make
sure that CIFSSMBClose is called in those cases.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-and-Tested-by: Suresh Jayaraman <sjayaraman@suse.de>