- 02 Jul, 2020 3 commits
-
-
Christian König authored
As discussed on the list. Signed-off-by:
Christian König <christian.koenig@amd.com> Acked-by:
Sumit Semwal <sumit.semwal@linaro.org> Acked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/373539/
-
Imre Deak authored
The old epoch counter was left uninited, so the function returned a changed state always. While at it debug print the old epoch counter as well. Fixes: 35205ee9 ("drm/i915: Send hotplug event if edid had changed") Cc: Kunal Joshi <kunal1.joshi@intel.com> Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200701180001.15857-1-imre.deak@intel.com
-
Tian Tao authored
using the new API drmm_kzalloc() instead of devm_kzalloc() v3: still fixed include statements sorted alphabetically. v2: keep the DRM include statements sorted alphabetically. Signed-off-by:
Tian Tao <tiantao6@hisilicon.com> Reviewed-by:
Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by:
-
- 01 Jul, 2020 20 commits
-
-
Ondrej Jirman authored
The reset pin is inverted, so if we don't assert reset, the actual gpio will be high and may keep driving the IO port of the panel. Signed-off-by:
Ondrej Jirman <megous@megous.com> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Tested-by:
Guido Günther <agx@sigxcpu.org> Reviewed-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200701162928.1638874-12-megous@megous.com
-
Ondrej Jirman authored
The datasheet suggests to issue sleep in after display off as a part of the panel's shutdown sequence. Signed-off-by:
-
Ondrej Jirman authored
Xingbangda XBD599 is a 5.99" 720x1440 MIPI-DSI LCD panel used in PinePhone. Add support for it. Signed-off-by:
Icenowy Zheng <icenowy@aosc.io> Signed-off-by:
-
Ondrej Jirman authored
Calling sleep out and display on is a controller specific part of the initialization process. Move it out of the panel specific initialization function to the enable callback. Signed-off-by:
-
Ondrej Jirman authored
It's better than having it spread around the driver. Signed-off-by:
-
Ondrej Jirman authored
Parametrize the driver so that it can support more panels based on st7703 controller. Signed-off-by:
-
Ondrej Jirman authored
This is done so that code that's not specific to a particular jh057n panel is named after the controller. Functions specific to the panel are kept named after the panel. Signed-off-by:
-
Ondrej Jirman authored
This rename is done so that the driver matches the name of the display controller and in preparation for adding support for more panels to the driver. This is just a basic file rename, with no code changes. Signed-off-by:
-
Ondrej Jirman authored
Xingbangda XBD599 is a 5.99" 720x1440 MIPI-DSI LCD panel. It is based on Sitronix ST7703 LCD controller just like rocktech,jh057n00900. It is used in PinePhone. Add a compatible for it. Signed-off-by:
-
Ondrej Jirman authored
Convert Rocktech MIPI DSI panel driver from txt to yaml bindings. Signed-off-by:
-
Icenowy Zheng authored
Shenzhen Xingbangda Display Technology Co., Ltd is a company which produces LCD modules. It supplies the LCD panels for the PinePhone. Add the vendor prefix of it. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Sam Ravnborg authored
Use inline comments for the drm_bus_flags enum. This makes it easier to add more description comments in the future should the need arise. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200630180545.1132217-8-sam@ravnborg.org
-
Sam Ravnborg authored
Drop the now unused legacy drm_bus_flags values. Signed-off-by:
-
Sam Ravnborg authored
Replace all uses of the legacy drm_bus_flags with their relevant _SAMPLE_ variant. This is a 1:1 replacement, no effort was made to validate the actual bus flags for the panels. Note: DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE = DRM_BUS_FLAG_PIXDATA_NEGEDGE DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE = DRM_BUS_FLAG_PIXDATA_POSEDGE Signed-off-by:
-
Sam Ravnborg authored
Drop use of the legacy drm_bus_flags member and use the more descriptive _SAMPLE_ variant. No functional change. Note: DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE = DRM_BUS_FLAG_PIXDATA_NEGEDGE Signed-off-by:
-
Sam Ravnborg authored
Use the non-legacy drm_bus_flag _SAMPLE_ member. No functional change. Note: DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE = DRM_BUS_FLAG_PIXDATA_NEGEDGE Signed-off-by:
-
Sam Ravnborg authored
Replace the legacy member with the more descriptive _DRIVE_ variant. No functional change. Signed-off-by:
-
Sam Ravnborg authored
Use the more descriptive _DRIVE_ variants thus avoiding the legacy drm_bus_flags values. Signed-off-by:
Jyri Sarha <jsarha@ti.com> Reviewed-by:
-
Dmitry Osipenko authored
When graph isn't defined in a device-tree, the of_graph_get_remote_node() prints a noisy error message, telling that port node is not found. This is undesirable behaviour in our case because absence of a panel/bridge graph is a valid case. Let's check the graph's presence in a device-tree before proceeding with parsing of the graph. Reviewed-by:
Dmitry Osipenko <digetx@gmail.com> Signed-off-by:
-
Dmitry Osipenko authored
In some cases it's very useful to silently check whether port node exists at all in a device-tree before proceeding with parsing the graph. The DRM bridges code is one example of such case where absence of a graph in a device-tree is a legit condition. This patch adds of_graph_is_present() which returns true if given device-tree node contains OF graph port. Reviewed-by:
-
- 30 Jun, 2020 9 commits
-
-
Laurent Pinchart authored
Only the MEDIA_BUS_FMT_RGB666_1X7X3_SPWG, MEDIA_BUS_FMT_RGB888_1X7X4_SPWG and MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA bus formats are valid for LVDS panels. Warn at probe time to catch the common mistake of using an incorrect format, as well as discrepancies between the bus format and the reported bpc. Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
-
Laurent Pinchart authored
The DRM bus flags reporting on which clock edge the pixel data and sync signals are sampled or driven don't make sense for LVDS panels, as the bus then uses sub-clock timings to send data. Drop those flags and add a warning in the probe function to make sure the mistake won't be repeated. Signed-off-by:
-
Laurent Pinchart authored
The Satoz SAT050AT40H12R2 panel is an LVDS panel, the MEDIA_BUS_FMT_RGB888_1X24 bus format is thus incorrect. Set it to the correct value MEDIA_BUS_FMT_RGB888_1X7X4_SPWG. Signed-off-by:
Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by:
-
Laurent Pinchart authored
The Starry KR070PE2T panel is a DPI panel, not and LVDS panel. Fix its connector type. Signed-off-by:
Pascal Roeleven <dev@pascalroeleven.nl> Signed-off-by:
-
Stanislav Lisovskiy authored
Added epoch counter checking to intel_encoder_hotplug in order to be able process all the connector changes, besides connection status. Also now any change in connector would result in epoch counter change, so no multiple checks are needed. v2: Renamed change counter to epoch counter. Fixed type name. v3: Fixed rebase conflict v4: Remove duplicate drm_edid_equal checks from hdmi and dp, lets use only once edid property is getting updated and increment epoch counter from there. Also lets now call drm_connector_update_edid_property right after we get edid always to make sure there is a unified way to handle edid change, without having to change tons of source code as currently drm_connector_update_edid_property is called only in certain cases like reprobing and not right after edid is actually updated. v5: Fixed const modifiers, removed blank line v6: Removed drm specific part from this patch, leaving only i915 specific changes here. Signed-off-by:Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200630002700.5451-4-kunal1.joshi@intel.comAcked-by:
Jani Nikula <jani.nikula@intel.com>
-
Stanislav Lisovskiy authored
This counter will be used by drm_helper_probe_detect caller to determine if anything had changed(including edid, connection status and etc). Hardware specific driver detect hooks are responsible for updating this counter when some change is detected to notify the drm part, which can trigger for example hotplug event. Also now call drm_connector_update_edid_property right after we get edid always to make sure there is a unified way to handle edid change, without having to change tons of source code as currently drm_connector_update_edid_property is called only in certain cases like reprobing and not right after edid is actually updated. v2: Added documentation for the new counter. Rename change_counter to epoch_counter. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105540Signed-off-by: -
Stanislav Lisovskiy authored
Many drivers would benefit from using drm helper to compare edid, rather than bothering with own implementation. v2: Added documentation for this function. Signed-off-by:
-
Maxime Ripard authored
The example used in the DPI binding before the conversion to YAML had a simple-panel example that got carried over to the YAML binding. However, that example doesn't match the simple-panel binding and results in validation errors. Since it's only marginally helpful, let's remove that part of the example entirely. Fixes: 09453600 ("dt-bindings: display: Convert VC4 bindings to schemas") Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Acked-by:
-
Laurent Pinchart authored
Convert the Renesas R-Car LVDS encoder text binding to YAML. Signed-off-by:
Maxime Ripard <mripard@kernel.org> Reviewed-by:
-
- 29 Jun, 2020 8 commits
-
-
Linus Walleij authored
The PL111 DRM driver is now the sole user of the external CLCD registers header file, so let's absorb that into the pl111_drm.h file and save the external include. Reviewed-by:
Eric Anholt <eric@anholt.net> Signed-off-by:
-
Linus Walleij authored
All the functionality in this driver has been reimplemented in the new DRM driver in drivers/gpu/drm/pl111/* and all the boards using it have been migrated to use the DRM driver with all configuration coming from the device tree. I started the work to migrate the CLCD driver to DRM in april 2017 and it took a little more than 3 years to do this properly without leaving any platforms behind. Reviewed-by:
-
Linus Walleij authored
This moves over some of the credit for the development of this driver from the old fbdev driver that I used as reference when getting this in place. Reviewed-by:
-
Christian König authored
We only need the page array when the BO is about to be accessed. So not only populate, but also create it on demand. v2: move NULL check into ttm_tt_create() v3: fix the occurrence in ttm_bo_kmap_ttm as well Signed-off-by:
Michael J. Ruhl <michael.j.ruhl@intel.com> Link: https://patchwork.freedesktop.org/patch/373182/
-
Christian König authored
Instead of signaling failure by setting the node pointer to NULL do so by returning -ENOSPC. v2: add memset() to make sure that mem is always initialized. v3: drop memset() only set mm_node = NULL, move mm_node init in amdgpu Signed-off-by:
-
Maarten Lankhorst authored
Some conflicts with ttm_bo->offset removal, but drm-misc-next needs updating to v5.8. Signed-off-by: -
Antonio Borneo authored
Some of these comments are part of the Linux GPU Driver Developer's Guide. Fix some minor typo in the comments and remove a repeated 'the'. Signed-off-by:
Antonio Borneo <antonio.borneo@st.com> Signed-off-by:
-
Emil Velikov authored
The helper uses the MIPI_DCS_SET_TEAR_SCANLINE, although it's currently using the generic write. This does not look right. Perhaps some platforms don't distinguish between the two writers? Cc: Robert Chiras <robert.chiras@nxp.com> Cc: Vinay Simha BN <simhavcs@gmail.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Thierry Reding <treding@nvidia.com> Fixes: e8395081 ("drm/dsi: Implement set tear scanline") Signed-off-by:
Emil Velikov <emil.velikov@collabora.com> Reviewed-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
