- 13 Jun, 2020 1 commit
-
-
David Sterba authored
This reverts commit a43a67a2. This patch reverts the main part of switching direct io implementation to iomap infrastructure. There's a problem in invalidate page that couldn't be solved as regression in this development cycle. The problem occurs when buffered and direct io are mixed, and the ranges overlap. Although this is not recommended, filesystems implement measures or fallbacks to make it somehow work. In this case, fallback to buffered IO would be an option for btrfs (this already happens when direct io is done on compressed data), but the change would be needed in the iomap code, bringing new semantics to other filesystems. Another problem arises when again the buffered and direct ios are mixed, invalidation fails, then -EIO is set on the mapping and fsync will fail, though there's no real error. There have been discussions how to fix that, but revert seems to be the least intrusive option. Link: https://lore.kernel.org/linux-btrfs/20200528192103.xm45qoxqmkw7i5yl@fiona/Signed-off-by:
David Sterba <dsterba@suse.com>
-
- 09 Jun, 2020 3 commits
-
-
David Sterba authored
This reverts commit b75b7ca7. The patch restores a helper that was not necessary after direct IO port to iomap infrastructure, which gets reverted. Signed-off-by:
-
David Sterba authored
This reverts commit 5f008163. The patch is a simplification after direct IO port to iomap infrastructure, which gets reverted. Signed-off-by:
-
David Sterba authored
This reverts commit d8f3e735. The patch is a cleanup of direct IO port to iomap infrastructure, which gets reverted. Signed-off-by:
-
- 28 May, 2020 9 commits
-
-
Filipe Manana authored
We always preallocate a data extent for writing a free space cache, which causes writeback to always try the nocow path first, since the free space inode has the prealloc bit set in its flags. However if the block group that contains the data extent for the space cache has been turned to RO mode due to a running scrub or balance for example, we have to fallback to the cow path. In that case once a new data extent is allocated we end up calling btrfs_add_reserved_bytes(), which decrements the counter named bytes_may_use from the data space_info object with the expection that this counter was previously incremented with the same amount (the size of the data extent). However when we started writeout of the space cache at cache_save_setup(), we incremented the value of the bytes_may_use counter through a call to btrfs_check_data_free_space() and then decremented it through a call to btrfs_prealloc_file_range_trans() immediately after. So when starting the writeback if we fallback to cow mode we have to increment the counter bytes_may_use of the data space_info again to compensate for the extent allocation done by the cow path. When this issue happens we are incorrectly decrementing the bytes_may_use counter and when its current value is smaller then the amount we try to subtract we end up with the following warning: ------------[ cut here ]------------ WARNING: CPU: 3 PID: 657 at fs/btrfs/space-info.h:115 btrfs_add_reserved_bytes+0x3d6/0x4e0 [btrfs] Modules linked in: btrfs blake2b_generic xor raid6_pq libcrc32c (...) CPU: 3 PID: 657 Comm: kworker/u8:7 Tainted: G W 5.6.0-rc7-btrfs-next-58 #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 Workqueue: writeback wb_workfn (flush-btrfs-1591) RIP: 0010:btrfs_add_reserved_bytes+0x3d6/0x4e0 [btrfs] Code: ff ff 48 (...) RSP: 0000:ffffa41608f13660 EFLAGS: 00010287 RAX: 0000000000001000 RBX: ffff9615b93ae400 RCX: 0000000000000000 RDX: 0000000000000002 RSI: 0000000000000000 RDI: ffff9615b96ab410 RBP: fffffffffffee000 R08: 0000000000000001 R09: 0000000000000000 R10: ffff961585e62a40 R11: 0000000000000000 R12: ffff9615b96ab400 R13: ffff9615a1a2a000 R14: 0000000000012000 R15: ffff9615b93ae400 FS: 0000000000000000(0000) GS:ffff9615bb200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055cbbc2ae178 CR3: 0000000115794006 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: find_free_extent+0x4a0/0x16c0 [btrfs] btrfs_reserve_extent+0x91/0x180 [btrfs] cow_file_range+0x12d/0x490 [btrfs] btrfs_run_delalloc_range+0x9f/0x6d0 [btrfs] ? find_lock_delalloc_range+0x221/0x250 [btrfs] writepage_delalloc+0xe8/0x150 [btrfs] __extent_writepage+0xe8/0x4c0 [btrfs] extent_write_cache_pages+0x237/0x530 [btrfs] extent_writepages+0x44/0xa0 [btrfs] do_writepages+0x23/0x80 __writeback_single_inode+0x59/0x700 writeback_sb_inodes+0x267/0x5f0 __writeback_inodes_wb+0x87/0xe0 wb_writeback+0x382/0x590 ? wb_workfn+0x4a2/0x6c0 wb_workfn+0x4a2/0x6c0 process_one_work+0x26d/0x6a0 worker_thread+0x4f/0x3e0 ? process_one_work+0x6a0/0x6a0 kthread+0x103/0x140 ? kthread_create_worker_on_cpu+0x70/0x70 ret_from_fork+0x3a/0x50 irq event stamp: 0 hardirqs last enabled at (0): [<0000000000000000>] 0x0 hardirqs last disabled at (0): [<ffffffffb2abdedf>] copy_process+0x74f/0x2020 softirqs last enabled at (0): [<ffffffffb2abdedf>] copy_process+0x74f/0x2020 softirqs last disabled at (0): [<0000000000000000>] 0x0 ---[ end trace bd7c03622e0b0a52 ]--- ------------[ cut here ]------------ So fix this by incrementing the bytes_may_use counter of the data space_info when we fallback to the cow path. If the cow path is successful the counter is decremented after extent allocation (by btrfs_add_reserved_bytes()), if it fails it ends up being decremented as well when clearing the delalloc range (extent_clear_unlock_delalloc()). This could be triggered sporadically by the test case btrfs/061 from fstests. Fixes: 82d5902d ("Btrfs: Support reading/writing on disk free ino cache") CC: stable@vger.kernel.org # 4.4+ Signed-off-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
-
Filipe Manana authored
When doing a buffered write we always try to reserve data space for it, even when the file has the NOCOW bit set or the write falls into a file range covered by a prealloc extent. This is done both because it is expensive to check if we can do a nocow write (checking if an extent is shared through reflinks or if there's a hole in the range for example), and because when writeback starts we might actually need to fallback to COW mode (for example the block group containing the target extents was turned into RO mode due to a scrub or balance). When we are unable to reserve data space we check if we can do a nocow write, and if we can, we proceed with dirtying the pages and setting up the range for delalloc. In this case the bytes_may_use counter of the data space_info object is not incremented, unlike in the case where we are able to reserve data space (done through btrfs_check_data_free_space() which calls btrfs_alloc_data_chunk_ondemand()). Later when running delalloc we attempt to start writeback in nocow mode but we might revert back to cow mode, for example because in the meanwhile a block group was turned into RO mode by a scrub or relocation. The cow path after successfully allocating an extent ends up calling btrfs_add_reserved_bytes(), which expects the bytes_may_use counter of the data space_info object to have been incremented before - but we did not do it when the buffered write started, since there was not enough available data space. So btrfs_add_reserved_bytes() ends up decrementing the bytes_may_use counter anyway, and when the counter's current value is smaller then the size of the allocated extent we get a stack trace like the following: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 20138 at fs/btrfs/space-info.h:115 btrfs_add_reserved_bytes+0x3d6/0x4e0 [btrfs] Modules linked in: btrfs blake2b_generic xor raid6_pq libcrc32c (...) CPU: 0 PID: 20138 Comm: kworker/u8:15 Not tainted 5.6.0-rc7-btrfs-next-58 #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 Workqueue: writeback wb_workfn (flush-btrfs-1754) RIP: 0010:btrfs_add_reserved_bytes+0x3d6/0x4e0 [btrfs] Code: ff ff 48 (...) RSP: 0018:ffffbda18a4b3568 EFLAGS: 00010287 RAX: 0000000000000000 RBX: ffff9ca076f5d800 RCX: 0000000000000000 RDX: 0000000000000002 RSI: 0000000000000000 RDI: ffff9ca068470410 RBP: fffffffffffff000 R08: 0000000000000001 R09: 0000000000000000 R10: ffff9ca079d58040 R11: 0000000000000000 R12: ffff9ca068470400 R13: ffff9ca0408b2000 R14: 0000000000001000 R15: ffff9ca076f5d800 FS: 0000000000000000(0000) GS:ffff9ca07a600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005605dbfe7048 CR3: 0000000138570006 CR4: 00000000003606f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: find_free_extent+0x4a0/0x16c0 [btrfs] btrfs_reserve_extent+0x91/0x180 [btrfs] cow_file_range+0x12d/0x490 [btrfs] run_delalloc_nocow+0x341/0xa40 [btrfs] btrfs_run_delalloc_range+0x1ea/0x6d0 [btrfs] ? find_lock_delalloc_range+0x221/0x250 [btrfs] writepage_delalloc+0xe8/0x150 [btrfs] __extent_writepage+0xe8/0x4c0 [btrfs] extent_write_cache_pages+0x237/0x530 [btrfs] ? btrfs_wq_submit_bio+0x9f/0xc0 [btrfs] extent_writepages+0x44/0xa0 [btrfs] do_writepages+0x23/0x80 __writeback_single_inode+0x59/0x700 writeback_sb_inodes+0x267/0x5f0 __writeback_inodes_wb+0x87/0xe0 wb_writeback+0x382/0x590 ? wb_workfn+0x4a2/0x6c0 wb_workfn+0x4a2/0x6c0 process_one_work+0x26d/0x6a0 worker_thread+0x4f/0x3e0 ? process_one_work+0x6a0/0x6a0 kthread+0x103/0x140 ? kthread_create_worker_on_cpu+0x70/0x70 ret_from_fork+0x3a/0x50 irq event stamp: 0 hardirqs last enabled at (0): [<0000000000000000>] 0x0 hardirqs last disabled at (0): [<ffffffff94ebdedf>] copy_process+0x74f/0x2020 softirqs last enabled at (0): [<ffffffff94ebdedf>] copy_process+0x74f/0x2020 softirqs last disabled at (0): [<0000000000000000>] 0x0 ---[ end trace f9f6ef8ec4cd8ec9 ]--- So to fix this, when falling back into cow mode check if space was not reserved, by testing for the bit EXTENT_NORESERVE in the respective file range, and if not, increment the bytes_may_use counter for the data space_info object. Also clear the EXTENT_NORESERVE bit from the range, so that if the cow path fails it decrements the bytes_may_use counter when clearing the delalloc range (through the btrfs_clear_delalloc_extent() callback). Fixes: 7ee9e440 ("Btrfs: check if we can nocow if we don't have data space") CC: stable@vger.kernel.org # 4.4+ Signed-off-by:
-
Filipe Manana authored
If an error happens while running dellaloc in COW mode for a range, we can end up calling extent_clear_unlock_delalloc() for a range that goes beyond our range's end offset by 1 byte, which affects 1 extra page. This results in clearing bits and doing page operations (such as a page unlock) outside our target range. Fix that by calling extent_clear_unlock_delalloc() with an inclusive end offset, instead of an exclusive end offset, at cow_file_range(). Fixes: a315e68f ("Btrfs: fix invalid attempt to free reserved space on failure to cow range") CC: stable@vger.kernel.org # 4.14+ Signed-off-by:
-
Nikolay Borisov authored
The local 'b' variable is only used to directly read values from passed extent buffer. So eliminate it and directly use the input parameter. Furthermore this shrinks the size of the following functions: ./scripts/bloat-o-meter ctree.orig fs/btrfs/ctree.o add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-73 (-73) Function old new delta read_block_for_search.isra 876 871 -5 push_node_left 1112 1044 -68 Total: Before=50348, After=50275, chg -0.14% Reviewed-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by:
Nikolay Borisov <nborisov@suse.com> Reviewed-by:
-
Nikolay Borisov authored
This function wraps the optimisation implemented by d7396f07 ("Btrfs: optimize key searches in btrfs_search_slot") however this optimisation is really used in only one place - btrfs_search_slot. Just open code the optimisation and also add a comment explaining how it works since it's not clear just by looking at the code - the key point here is it depends on an internal invariant that BTRFS' btree provides, namely intermediate pointers always contain the key at slot0 at the child node. So in the case of exact match we can safely assume that the given key will always be in slot 0 on lower levels. Furthermore this results in a reduction of btrfs_search_slot's size: ./scripts/bloat-o-meter ctree.orig fs/btrfs/ctree.o add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-75 (-75) Function old new delta btrfs_search_slot 2783 2708 -75 Total: Before=50423, After=50348, chg -0.15% Reviewed-by:
-
Christoph Hellwig authored
The read and write versions don't have anything in common except for the call to iomap_dio_rw. So split this function, and merge each half into its only caller. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by:
-
Goldwyn Rodrigues authored
Since we now perform direct reads using i_rwsem, we can remove this inode flag used to co-ordinate unlocked reads. The truncate call takes i_rwsem. This means it is correctly synchronized with concurrent direct reads. Reviewed-by:
Johannes Thumshirn <jth@kernel.org> Signed-off-by:
-
Goldwyn Rodrigues authored
Since we removed the last user of dio_end_io(), remove the helper function dio_end_io(). Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by:
-
Goldwyn Rodrigues authored
Switch from __blockdev_direct_IO() to iomap_dio_rw(). Rename btrfs_get_blocks_direct() to btrfs_dio_iomap_begin() and use it as iomap_begin() for iomap direct I/O functions. This function allocates and locks all the blocks required for the I/O. btrfs_submit_direct() is used as the submit_io() hook for direct I/O ops. Since we need direct I/O reads to go through iomap_dio_rw(), we change file_operations.read_iter() to a btrfs_file_read_iter() which calls btrfs_direct_IO() for direct reads and falls back to generic_file_buffered_read() for incomplete reads and buffered reads. We don't need address_space.direct_IO() anymore so set it to noop. Similarly, we don't need flags used in __blockdev_direct_IO(). iomap is capable of direct I/O reads from a hole, so we don't need to return -ENOENT. BTRFS direct I/O is now done under i_rwsem, shared in case of reads and exclusive in case of writes. This guards against simultaneous truncates. Use iomap->iomap_end() to check for failed or incomplete direct I/O: - for writes, call __endio_write_update_ordered() - for reads, unlock extents btrfs_dio_data is now hooked in iomap->private and not current->journal_info. It carries the reservation variable and the amount of data submitted, so we can calculate the amount of data to call __endio_write_update_ordered in case of an error. This patch removes last use of struct buffer_head from btrfs. Signed-off-by:
-
- 25 May, 2020 27 commits
-
-
Goldwyn Rodrigues authored
Filesystems such as btrfs can perform direct I/O without holding the inode->i_rwsem in some of the cases like writing within i_size. So, remove the check for lockdep_assert_held() in iomap_dio_rw(). Reviewed-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
-
Goldwyn Rodrigues authored
This helps filesystems to perform tasks on the bio while submitting for I/O. This could be post-write operations such as data CRC or data replication for fs-handled RAID. Reviewed-by:
-
Goldwyn Rodrigues authored
Export generic_file_buffered_read() to be used to supplement incomplete direct reads. Reviewed-by:
-
Filipe Manana authored
Since commit 1afb648e ("btrfs: use standard debug config option to enable free-space-cache debug prints"), we started to log error messages that were never logged before since there was no DEBUG macro defined anywhere. This started to make test case btrfs/187 to fail very often, as it greps for any btrfs error messages in dmesg/syslog and fails if any is found: (...) btrfs/186 1s ... 2s btrfs/187 - output mismatch (see .../results//btrfs/187.out.bad) \--- tests/btrfs/187.out 2019-05-17 12:48:32.537340749 +0100 \+++ /home/fdmanana/git/hub/xfstests/results//btrfs/187.out.bad ... \@@ -1,3 +1,8 @@ QA output created by 187 Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap1' Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap2' +[268364.139958] BTRFS error (device sdc): failed to write free space cache for block group 30408704 +[268380.156503] BTRFS error (device sdc): failed to write free space cache for block group 30408704 +[268380.161703] BTRFS error (device sdc): failed to write free space cache for block group 30408704 +[268380.253180] BTRFS error (device sdc): failed to write free space cache for block group 30408704 ... (Run 'diff -u /home/fdmanana/git/hub/xfstests/tests/btrfs/187.out ... btrfs/188 4s ... 2s (...) The space cache write failures happen due to ENOSPC when attempting to update the free space cache items in the root tree. This happens because when starting or joining a transaction we don't know how many block groups we will end up changing (due to extent allocation or release) and therefore never reserve space for updating free space cache items. More often than not, the free space cache writeout succeeds since the metadata space info is not yet full nor very close to being full, but when it is, the space cache writeout fails with ENOSPC. Occasional failures to write space caches are not considered critical since they can be rebuilt when mounting the filesystem or the next attempt to write a free space cache in the next transaction commit might succeed, so we used to hide those error messages with a preprocessor check for the existence of the DEBUG macro that was never enabled anywhere. A few other generic test cases also trigger the error messages due to ENOSPC failure when writing free space caches as well, however they don't fail since they don't grep dmesg/syslog for any btrfs specific error messages. So change the messages from 'error' level to 'debug' level, as it doesn't make much sense to have error messages triggered only if the debug macro is enabled plus, more importantly, the error is not serious nor highly unexpected. Signed-off-by:
-
Filipe Manana authored
Currently the error messages logged when we fail to write a free space cache or an inode cache are not very useful as they don't mention what was the error. So include the error number in the messages. Signed-off-by:
-
Filipe Manana authored
The label 'fail_unlock' is pointless, all it does is to jump to the label 'out', so just remove it. Signed-off-by:
-
Filipe Manana authored
We are currently treating any non-zero return value from btrfs_next_leaf() the same way, by going to the code that inserts a new checksum item in the tree. However if btrfs_next_leaf() returns an error (a value < 0), we should just stop and return the error, and not behave as if nothing has happened, since in that case we do not have a way to know if there is a next leaf or we are currently at the last leaf already. So fix that by returning the error from btrfs_next_leaf(). Signed-off-by:
-
Filipe Manana authored
When we want to add checksums into the checksums tree, or a log tree, we try whenever possible to extend existing checksum items, as this helps reduce amount of metadata space used, since adding a new item uses extra metadata space for a btrfs_item structure (25 bytes). However we have two inefficiencies in the current approach: 1) After finding a checksum item that covers a range with an end offset that matches the start offset of the checksum range we want to insert, we release the search path populated by btrfs_lookup_csum() and then do another COW search on tree with the goal of getting additional space for at least one checksum. Doing this path release and then searching again is a waste of time because very often the leaf already has enough free space for at least one more checksum; 2) After the COW search that guarantees we get free space in the leaf for at least one more checksum, we end up not doing the extension of the previous checksum item, and fallback to insertion of a new checksum item, if the leaf doesn't have an amount of free space larger then the space required for 2 checksums plus one btrfs_item structure - this is pointless for two reasons: a) We want to extend an existing item, so we don't need to account for a btrfs_item structure (25 bytes); b) We made the COW search with an insertion size for 1 single checksum, so if the leaf ends up with a free space amount smaller then 2 checksums plus the size of a btrfs_item structure, we give up on the extension of the existing item and jump to the 'insert' label, where we end up releasing the path and then doing yet another search to insert a new checksum item for a single checksum. Fix these inefficiencies by doing the following: - For case 1), before releasing the path just check if the leaf already has enough space for at least 1 more checksum, and if it does, jump directly to the item extension code, with releasing our current path, which was already COWed by btrfs_lookup_csum(); - For case 2), fix the logic so that for item extension we require only that the leaf has enough free space for 1 checksum, and not a minimum of 2 checksums plus space for a btrfs_item structure. Signed-off-by: -
Filipe Manana authored
When we have extents shared amongst different inodes in the same subvolume, if we fsync them in parallel we can end up with checksum items in the log tree that represent ranges which overlap. For example, consider we have inodes A and B, both sharing an extent that covers the logical range from X to X + 64KiB: 1) Task A starts an fsync on inode A; 2) Task B starts an fsync on inode B; 3) Task A calls btrfs_csum_file_blocks(), and the first search in the log tree, through btrfs_lookup_csum(), returns -EFBIG because it finds an existing checksum item that covers the range from X - 64KiB to X; 4) Task A checks that the checksum item has not reached the maximum possible size (MAX_CSUM_ITEMS) and then releases the search path before it does another path search for insertion (through a direct call to btrfs_search_slot()); 5) As soon as task A releases the path and before it does the search for insertion, task B calls btrfs_csum_file_blocks() and gets -EFBIG too, because there is an existing checksum item that has an end offset that matches the start offset (X) of the checksum range we want to log; 6) Task B releases the path; 7) Task A does the path search for insertion (through btrfs_search_slot()) and then verifies that the checksum item that ends at offset X still exists and extends its size to insert the checksums for the range from X to X + 64KiB; 8) Task A releases the path and returns from btrfs_csum_file_blocks(), having inserted the checksums into an existing checksum item that got its size extended. At this point we have one checksum item in the log tree that covers the logical range from X - 64KiB to X + 64KiB; 9) Task B now does a search for insertion using btrfs_search_slot() too, but it finds that the previous checksum item no longer ends at the offset X, it now ends at an of offset X + 64KiB, so it leaves that item untouched. Then it releases the path and calls btrfs_insert_empty_item() that inserts a checksum item with a key offset corresponding to X and a size for inserting a single checksum (4 bytes in case of crc32c). Subsequent iterations end up extending this new checksum item so that it contains the checksums for the range from X to X + 64KiB. So after task B returns from btrfs_csum_file_blocks() we end up with two checksum items in the log tree that have overlapping ranges, one for the range from X - 64KiB to X + 64KiB, and another for the range from X to X + 64KiB. Having checksum items that represent ranges which overlap, regardless of being in the log tree or in the chekcsums tree, can lead to problems where checksums for a file range end up not being found. This type of problem has happened a few times in the past and the following commits fixed them and explain in detail why having checksum items with overlapping ranges is problematic: 27b9a812 "Btrfs: fix csum tree corruption, duplicate and outdated checksums" b84b8390 "Btrfs: fix file read corruption after extent cloning and fsync" 40e046ac "Btrfs: fix missing data checksums after replaying a log tree" Since this specific instance of the problem can only happen when logging inodes, because it is the only case where concurrent attempts to insert checksums for the same range can happen, fix the issue by using an extent io tree as a range lock to serialize checksum insertion during inode logging. This issue could often be reproduced by the test case generic/457 from fstests. When it happens it produces the following trace: BTRFS critical (device dm-0): corrupt leaf: root=18446744073709551610 block=30625792 slot=42, csum end range (15020032) goes beyond the start range (15015936) of the next csum item BTRFS info (device dm-0): leaf 30625792 gen 7 total ptrs 49 free space 2402 owner 18446744073709551610 BTRFS info (device dm-0): refs 1 lock (w:0 r:0 bw:0 br:0 sw:0 sr:0) lock_owner 0 current 15884 item 0 key (18446744073709551606 128 13979648) itemoff 3991 itemsize 4 item 1 key (18446744073709551606 128 13983744) itemoff 3987 itemsize 4 item 2 key (18446744073709551606 128 13987840) itemoff 3983 itemsize 4 item 3 key (18446744073709551606 128 13991936) itemoff 3979 itemsize 4 item 4 key (18446744073709551606 128 13996032) itemoff 3975 itemsize 4 item 5 key (18446744073709551606 128 14000128) itemoff 3971 itemsize 4 (...) BTRFS error (device dm-0): block=30625792 write time tree block corruption detected ------------[ cut here ]------------ WARNING: CPU: 1 PID: 15884 at fs/btrfs/disk-io.c:539 btree_csum_one_bio+0x268/0x2d0 [btrfs] Modules linked in: btrfs dm_thin_pool ... CPU: 1 PID: 15884 Comm: fsx Tainted: G W 5.6.0-rc7-btrfs-next-58 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 RIP: 0010:btree_csum_one_bio+0x268/0x2d0 [btrfs] Code: c7 c7 ... RSP: 0018:ffffbb0109e6f8e0 EFLAGS: 00010296 RAX: 0000000000000000 RBX: ffffe1c0847b6080 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffffaa963988 RDI: 0000000000000001 RBP: ffff956a4f4d2000 R08: 0000000000000000 R09: 0000000000000001 R10: 0000000000000526 R11: 0000000000000000 R12: ffff956a5cd28bb0 R13: 0000000000000000 R14: ffff956a649c9388 R15: 000000011ed82000 FS: 00007fb419959e80(0000) GS:ffff956a7aa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000fe6d54 CR3: 0000000138696005 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: btree_submit_bio_hook+0x67/0xc0 [btrfs] submit_one_bio+0x31/0x50 [btrfs] btree_write_cache_pages+0x2db/0x4b0 [btrfs] ? __filemap_fdatawrite_range+0xb1/0x110 do_writepages+0x23/0x80 __filemap_fdatawrite_range+0xd2/0x110 btrfs_write_marked_extents+0x15e/0x180 [btrfs] btrfs_sync_log+0x206/0x10a0 [btrfs] ? kmem_cache_free+0x315/0x3b0 ? btrfs_log_inode+0x1e8/0xf90 [btrfs] ? __mutex_unlock_slowpath+0x45/0x2a0 ? lockref_put_or_lock+0x9/0x30 ? dput+0x2d/0x580 ? dput+0xb5/0x580 ? btrfs_sync_file+0x464/0x4d0 [btrfs] btrfs_sync_file+0x464/0x4d0 [btrfs] do_fsync+0x38/0x60 __x64_sys_fsync+0x10/0x20 do_syscall_64+0x5c/0x280 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7fb41953a6d0 Code: 48 3d ... RSP: 002b:00007ffcc86bd218 EFLAGS: 00000246 ORIG_RAX: 000000000000004a RAX: ffffffffffffffda RBX: 000000000000000d RCX: 00007fb41953a6d0 RDX: 0000000000000009 RSI: 0000000000040000 RDI: 0000000000000003 RBP: 0000000000040000 R08: 0000000000000001 R09: 0000000000000009 R10: 0000000000000064 R11: 0000000000000246 R12: 0000556cf4b2c060 R13: 0000000000000100 R14: 0000000000000000 R15: 0000556cf322b420 irq event stamp: 0 hardirqs last enabled at (0): [<0000000000000000>] 0x0 hardirqs last disabled at (0): [<ffffffffa96bdedf>] copy_process+0x74f/0x2020 softirqs last enabled at (0): [<ffffffffa96bdedf>] copy_process+0x74f/0x2020 softirqs last disabled at (0): [<0000000000000000>] 0x0 ---[ end trace d543fc76f5ad7fd8 ]--- In that trace the tree checker detected the overlapping checksum items at the time when we triggered writeback for the log tree when syncing the log. Another trace that can happen is due to BUG_ON() when deleting checksum items while logging an inode: BTRFS critical (device dm-0): slot 81 key (18446744073709551606 128 13635584) new key (18446744073709551606 128 13635584) BTRFS info (device dm-0): leaf 30949376 gen 7 total ptrs 98 free space 8527 owner 18446744073709551610 BTRFS info (device dm-0): refs 4 lock (w:1 r:0 bw:0 br:0 sw:1 sr:0) lock_owner 13473 current 13473 item 0 key (257 1 0) itemoff 16123 itemsize 160 inode generation 7 size 262144 mode 100600 item 1 key (257 12 256) itemoff 16103 itemsize 20 item 2 key (257 108 0) itemoff 16050 itemsize 53 extent data disk bytenr 13631488 nr 4096 extent data offset 0 nr 131072 ram 131072 (...) ------------[ cut here ]------------ kernel BUG at fs/btrfs/ctree.c:3153! invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI CPU: 1 PID: 13473 Comm: fsx Not tainted 5.6.0-rc7-btrfs-next-58 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 RIP: 0010:btrfs_set_item_key_safe+0x1ea/0x270 [btrfs] Code: 0f b6 ... RSP: 0018:ffff95e3889179d0 EFLAGS: 00010282 RAX: 0000000000000000 RBX: 0000000000000051 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffffb7763988 RDI: 0000000000000001 RBP: fffffffffffffff6 R08: 0000000000000000 R09: 0000000000000001 R10: 00000000000009ef R11: 0000000000000000 R12: ffff8912a8ba5a08 R13: ffff95e388917a06 R14: ffff89138dcf68c8 R15: ffff95e388917ace FS: 00007fe587084e80(0000) GS:ffff8913baa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe587091000 CR3: 0000000126dac005 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: btrfs_del_csums+0x2f4/0x540 [btrfs] copy_items+0x4b5/0x560 [btrfs] btrfs_log_inode+0x910/0xf90 [btrfs] btrfs_log_inode_parent+0x2a0/0xe40 [btrfs] ? dget_parent+0x5/0x370 btrfs_log_dentry_safe+0x4a/0x70 [btrfs] btrfs_sync_file+0x42b/0x4d0 [btrfs] __x64_sys_msync+0x199/0x200 do_syscall_64+0x5c/0x280 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7fe586c65760 Code: 00 f7 ... RSP: 002b:00007ffe250f98b8 EFLAGS: 00000246 ORIG_RAX: 000000000000001a RAX: ffffffffffffffda RBX: 00000000000040e1 RCX: 00007fe586c65760 RDX: 0000000000000004 RSI: 0000000000006b51 RDI: 00007fe58708b000 RBP: 0000000000006a70 R08: 0000000000000003 R09: 00007fe58700cb61 R10: 0000000000000100 R11: 0000000000000246 R12: 00000000000000e1 R13: 00007fe58708b000 R14: 0000000000006b51 R15: 0000558de021a420 Modules linked in: dm_log_writes ... ---[ end trace c92a7f447a8515f5 ]--- CC: stable@vger.kernel.org # 4.4+ Signed-off-by:
-
Anand Jain authored
btrfs_compress_set_level() can be static function in the file compression.c. Reviewed-by:
Anand Jain <anand.jain@oracle.com> Reviewed-by:
-
David Sterba authored
The inode lookup starting at btrfs_iget takes the full location key, while only the objectid is used to match the inode, because the lookup happens inside the given root thus the inode number is unique. The entire location key is properly set up in btrfs_init_locked_inode. Simplify the helpers and pass only inode number, renaming it to 'ino' instead of 'objectid'. This allows to remove temporary variables key, saving some stack space. Signed-off-by: -
David Sterba authored
After the update to btrfs_get_fs_root, read_fs_root has become trivial wrapper that can be open coded. Signed-off-by: -
David Sterba authored
The main function to lookup a root by its id btrfs_get_fs_root takes the whole key, while only using the objectid. The value of offset is preset to (u64)-1 but not actually used until btrfs_find_root that does the actual search. Switch btrfs_get_fs_root to use only objectid and remove all local variables that existed just for the lookup. The actual key for search is set up in btrfs_get_fs_root, reusing another key variable. Signed-off-by: -
Qu Wenruo authored
[BUG] There are several reported runaway balance, that balance is flooding the log with "found X extents" where the X never changes. [CAUSE] Commit d2311e69 ("btrfs: relocation: Delay reloc tree deletion after merge_reloc_roots") introduced BTRFS_ROOT_DEAD_RELOC_TREE bit to indicate that one subvolume has finished its tree blocks swap with its reloc tree. However if balance is canceled or hits ENOSPC halfway, we didn't clear the BTRFS_ROOT_DEAD_RELOC_TREE bit, leaving that bit hanging forever until unmount. Any subvolume root with that bit, would cause backref cache to skip this tree block, as it has finished its tree block swap. This would cause all tree blocks of that root be ignored by balance, leading to runaway balance. [FIX] Fix the problem by also clearing the BTRFS_ROOT_DEAD_RELOC_TREE bit for the original subvolume of orphan reloc root. Add an umount check for the stale bit still set. Fixes: d2311e69 ("btrfs: relocation: Delay reloc tree deletion after merge_reloc_roots") Signed-off-by:
Qu Wenruo <wqu@suse.com> Signed-off-by:
-
Qu Wenruo authored
[BUG] When balance is canceled, there is a pretty high chance that unmounting the fs can lead to lead the NULL pointer dereference: BTRFS warning (device dm-3): page private not zero on page 223158272 ... BTRFS warning (device dm-3): page private not zero on page 223162368 BTRFS error (device dm-3): leaked root 18446744073709551608-304 refcount 1 BUG: kernel NULL pointer dereference, address: 0000000000000168 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 2 PID: 5793 Comm: umount Tainted: G O 5.7.0-rc5-custom+ #53 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:__lock_acquire+0x5dc/0x24c0 Call Trace: lock_acquire+0xab/0x390 _raw_spin_lock+0x39/0x80 btrfs_release_extent_buffer_pages+0xd7/0x200 [btrfs] release_extent_buffer+0xb2/0x170 [btrfs] free_extent_buffer+0x66/0xb0 [btrfs] btrfs_put_root+0x8e/0x130 [btrfs] btrfs_check_leaked_roots.cold+0x5/0x5d [btrfs] btrfs_free_fs_info+0xe5/0x120 [btrfs] btrfs_kill_super+0x1f/0x30 [btrfs] deactivate_locked_super+0x3b/0x80 deactivate_super+0x3e/0x50 cleanup_mnt+0x109/0x160 __cleanup_mnt+0x12/0x20 task_work_run+0x67/0xa0 exit_to_usermode_loop+0xc5/0xd0 syscall_return_slowpath+0x205/0x360 do_syscall_64+0x6e/0xb0 entry_SYSCALL_64_after_hwframe+0x49/0xb3 RIP: 0033:0x7fd028ef740b [CAUSE] When balance is canceled, all reloc roots are marked as orphan, and orphan reloc roots are going to be cleaned up. However for orphan reloc roots and merged reloc roots, their lifespan are quite different: Merged reloc roots | Orphan reloc roots by cancel -------------------------------------------------------------------- create_reloc_root() | create_reloc_root() |- refs == 1 | |- refs == 1 | btrfs_grab_root(reloc_root); | btrfs_grab_root(reloc_root); |- refs == 2 | |- refs == 2 | root->reloc_root = reloc_root; | root->reloc_root = reloc_root; >>> No difference so far <<< | prepare_to_merge() | prepare_to_merge() |- btrfs_set_root_refs(item, 1);| |- if (!err) (err == -EINTR) | merge_reloc_roots() | merge_reloc_roots() |- merge_reloc_root() | |- Doing nothing to put reloc root |- insert_dirty_subvol() | |- refs == 2 |- __del_reloc_root() | |- btrfs_put_root() | |- refs == 1 | >>> Now orphan reloc roots still have refs 2 <<< | clean_dirty_subvols() | clean_dirty_subvols() |- btrfs_drop_snapshot() | |- btrfS_drop_snapshot() |- reloc_root get freed | |- reloc_root still has refs 2 | related ebs get freed, but | reloc_root still recorded in | allocated_roots btrfs_check_leaked_roots() | btrfs_check_leaked_roots() |- No leaked roots | |- Leaked reloc_roots detected | |- btrfs_put_root() | |- free_extent_buffer(root->node); | |- eb already freed, caused NULL | pointer dereference [FIX] The fix is to clear fs_root->reloc_root and put it at merge_reloc_roots() time, so that we won't leak reloc roots. Fixes: d2311e69 ("btrfs: relocation: Delay reloc tree deletion after merge_reloc_roots") CC: stable@vger.kernel.org # 5.1+ Tested-by: -
Robbie Ko authored
When creating a snapshot, ordered extents need to be flushed and this can take a long time. In create_snapshot there are two locks held when this happens: 1. Destination directory inode lock 2. Global subvolume semaphore This will unnecessarily block other operations like subvolume destroy, create, or setflag until the snapshot is created. We can fix that by moving the flush outside the locked section as this does not depend on the aforementioned locks. The code factors out the snapshot related work from create_snapshot to btrfs_mksnapshot. __btrfs_ioctl_snap_create btrfs_mksubvol create_subvol btrfs_mksnapshot <flush> btrfs_mksubvol create_snapshot Reviewed-by:Robbie Ko <robbieko@synology.com> Reviewed-by:
-
Qu Wenruo authored
SHAREABLE flag is set for subvolumes because users can create snapshot for subvolumes, thus sharing tree blocks of them. But data reloc tree is not exposed to user space, as it's only an internal tree for data relocation, thus it doesn't need the full path replacement handling at all. This patch will make data reloc tree a non-shareable tree, and add btrfs_fs_info::data_reloc_root for data reloc tree, so relocation code can grab it from fs_info directly. This would slightly improve tree relocation, as now data reloc tree can go through regular COW routine to get relocated, without bothering the complex tree reloc tree routine. Signed-off-by:
-
Qu Wenruo authored
There are a lot of root owner checks in btrfs_truncate_inode_items() like: if (test_bit(BTRFS_ROOT_SHAREABLE, &root->state) || root == fs_info->tree_root) But considering that, only these trees can have INODE_ITEMs: - tree root (for v1 space cache) - subvolume trees - tree reloc trees - data reloc tree - log trees And since subvolume/tree reloc/data reloc trees all have SHAREABLE bit, and we're checking tree root manually, so above check is just excluding log trees. This patch will replace two of such checks to a simpler one: if (root->root_key.objectid != BTRFS_TREE_LOG_OBJECTID) This would merge btrfs_drop_extent_cache() and lock_extent_bits() call into the same if branch. Signed-off-by:
-
Qu Wenruo authored
The name BTRFS_ROOT_REF_COWS is not very clear about the meaning. In fact, that bit can only be set to those trees: - Subvolume roots - Data reloc root - Reloc roots for above roots All other trees won't get this bit set. So just by the result, it is obvious that, roots with this bit set can have tree blocks shared with other trees. Either shared by snapshots, or by reloc roots (an special snapshot created by relocation). This patch will rename BTRFS_ROOT_REF_COWS to BTRFS_ROOT_SHAREABLE to make it easier to understand, and update all comment mentioning "reference counted" to follow the rename. Signed-off-by:
-
Anand Jain authored
Commit dccdb07b ("btrfs: kill btrfs_fs_info::volume_mutex") removed the last use of the volume_mutex, forgetting to update the comment. Signed-off-by:
-
David Sterba authored
Signed-off-by: -
David Sterba authored
The fallback path calls helper write_extent_buffer to do write of the data spanning two extent buffer pages. As the size is known, we can do the write directly in two steps. This removes one function call and compiler can optimize memcpy as the sizes are known at compile time. The cached token address is set to the second page. Reviewed-by:
-
David Sterba authored
The helper write_extent_buffer is called to do write of the data spanning two extent buffer pages. As the size is known, we can do the write directly in two steps. This removes one function call and compiler can optimize memcpy as the sizes are known at compile time. Reviewed-by:
-
David Sterba authored
The fallback path calls helper read_extent_buffer to do read of the data spanning two extent buffer pages. As the size is known, we can do the read directly in two steps. This removes one function call and compiler can optimize memcpy as the sizes are known at compile time. The cached token address is set to the second page. Reviewed-by:
-
David Sterba authored
The helper read_extent_buffer is called to do read of the data spanning two extent buffer pages. As the size is known, we can do the read directly in two steps. This removes one function call and compiler can optimize memcpy as the sizes are known at compile time. Reviewed-by:
-
David Sterba authored
Helpers that iterate over extent buffer pages set up several variables, one of them is finding out offset of the extent buffer start within a page. Right now we have extent buffers aligned to page sizes so this is effectively storing zero. This makes the code harder the follow and can be simplified. The same change is done in all the helpers: * remove: size_t start_offset = offset_in_page(eb->start); * simplify code using start_offset Reviewed-by:
-
David Sterba authored
There are many helpers around extent buffers, found in extent_io.h and ctree.h. Most of them can be converted to take constified eb as there are no changes to the extent buffer structure itself but rather the pages. Reviewed-by:
-
