- 08 Sep, 2021 40 commits
-
-
Randy Dunlap authored
Use the documented kernel-doc format to prevent kernel-doc warnings. mm/workingset.c:256: warning: No description found for return value of 'workingset_eviction' mm/workingset.c:285: warning: Function parameter or member 'folio' not described in 'workingset_refault' mm/workingset.c:285: warning: Excess function parameter 'page' description in 'workingset_refault' Link: https://lkml.kernel.org/r/20210808203153.10678-1-rdunlap@infradead.orgSigned-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Rafael Aquini authored
sysvipc_find_ipc() was left with a costly way to check if the offset position fed to it is bigger than the total number of IPC IDs in use. So much so that the time it takes to iterate over /proc/sysvipc/* files grows exponentially for a custom benchmark that creates "N" SYSV shm segments and then times the read of /proc/sysvipc/shm (milliseconds): 12 msecs to read 1024 segs from /proc/sysvipc/shm 18 msecs to read 2048 segs from /proc/sysvipc/shm 65 msecs to read 4096 segs from /proc/sysvipc/shm 325 msecs to read 8192 segs from /proc/sysvipc/shm 1303 msecs to read 16384 segs from /proc/sysvipc/shm 5182 msecs to read 32768 segs from /proc/sysvipc/shm The root problem lies with the loop that computes the total amount of ids in use to check if the "pos" feeded to sysvipc_find_ipc() grew bigger than "ids->in_use". That is a quite inneficient way to get to the maximum index in the id lookup table, specially when that value is already provided by struct ipc_ids.max_idx. This patch follows up on the optimization introduced via commit 15df03c8 ("sysvipc: make get_maxid O(1) again") and gets rid of the aforementioned costly loop replacing it by a simpler checkpoint based on ipc_get_maxidx() returned value, which allows for a smooth linear increase in time complexity for the same custom benchmark: 2 msecs to read 1024 segs from /proc/sysvipc/shm 2 msecs to read 2048 segs from /proc/sysvipc/shm 4 msecs to read 4096 segs from /proc/sysvipc/shm 9 msecs to read 8192 segs from /proc/sysvipc/shm 19 msecs to read 16384 segs from /proc/sysvipc/shm 39 msecs to read 32768 segs from /proc/sysvipc/shm Link: https://lkml.kernel.org/r/20210809203554.1562989-1-aquini@redhat.comSigned-off-by: Rafael Aquini <aquini@redhat.com> Acked-by: Davidlohr Bueso <dbueso@suse.de> Acked-by: Manfred Spraul <manfred@colorfullife.com> Cc: Waiman Long <llong@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Greg Thelen authored
Commit 54402986 ("selftests/memfd: add tests for F_SEAL_FUTURE_WRITE seal") added an unused variable to mfd_assert_reopen_fd(). Delete the unused variable. Link: https://lkml.kernel.org/r/20210702045509.1517643-1-gthelen@google.com Fixes: 54402986 ("selftests/memfd: add tests for F_SEAL_FUTURE_WRITE seal") Signed-off-by: Greg Thelen <gthelen@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Joel Fernandes (Google)" <joel@joelfernandes.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Lukas Bulwahn authored
Commit 05a4a952 ("kernel/watchdog: split up config options") adds a new config HARDLOCKUP_DETECTOR, which selects the non-existing config HARDLOCKUP_DETECTOR_ARCH. Hence, ./scripts/checkkconfigsymbols.py warns: HARDLOCKUP_DETECTOR_ARCH Referencing files: lib/Kconfig.debug Simply drop selecting the non-existing HARDLOCKUP_DETECTOR_ARCH. Link: https://lkml.kernel.org/r/20210806115618.22088-1-lukas.bulwahn@gmail.com Fixes: 05a4a952 ("kernel/watchdog: split up config options") Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Babu Moger <babu.moger@oracle.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Zenghui Yu authored
This CONFIG option was removed in commit 278b13ce ("Input: remove input_polled_dev implementation") so there's no point to keep it in defconfigs any longer. Get rid of the leftover for all arches. Link: https://lkml.kernel.org/r/20210726074741.1062-1-yuzenghui@huawei.comSigned-off-by: Zenghui Yu <yuzenghui@huawei.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Cyrill Gorcunov authored
Keno Fischer reported that when a binray loaded via ld-linux-x the prctl(PR_SET_MM_MAP) doesn't allow to setup brk value because it lays before mm:end_data. For example a test program shows | # ~/t | | start_code 401000 | end_code 401a15 | start_stack 7ffce4577dd0 | start_data 403e10 | end_data 40408c | start_brk b5b000 | sbrk(0) b5b000 and when executed via ld-linux | # /lib64/ld-linux-x86-64.so.2 ~/t | | start_code 7fc25b0a4000 | end_code 7fc25b0c4524 | start_stack 7fffcc6b2400 | start_data 7fc25b0ce4c0 | end_data 7fc25b0cff98 | start_brk 55555710c000 | sbrk(0) 55555710c000 This of course prevent criu from restoring such programs. Looking into how kernel operates with brk/start_brk inside brk() syscall I don't see any problem if we allow to setup brk/start_brk without checking for end_data. Even if someone pass some weird address here on a purpose then the worst possible result will be an unexpected unmapping of existing vma (own vma, since prctl works with the callers memory) but test for RLIMIT_DATA is still valid and a user won't be able to gain more memory in case of expanding VMAs via new values shipped with prctl call. Link: https://lkml.kernel.org/r/20210121221207.GB2174@grain Fixes: bbdc6076 ("binfmt_elf: move brk out of mmap when doing direct loader exec") Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Reported-by: Keno Fischer <keno@juliacomputing.com> Acked-by: Andrey Vagin <avagin@gmail.com> Tested-by: Andrey Vagin <avagin@gmail.com> Cc: Dmitry Safonov <0x7f454c46@gmail.com> Cc: Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Pavel Tikhomirov <ptikhomirov@virtuozzo.com> Cc: Alexander Mikhalitsyn <alexander.mikhalitsyn@virtuozzo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Takahiro Itazuri authored
pidmap_init() has already been replaced with pid_idr_init() in the commit 95846ecf ("pid: replace pid bitmap implementation with IDR API"). Cleanup the stale comment which still mentions it. Link: https://lkml.kernel.org/r/20210714120713.19825-1-itazur@amazon.comSigned-off-by: Takahiro Itazuri <itazur@amazon.com> Cc: Kuniyuki Iwashima <kuniyu@amazon.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Christoph Hellwig authored
Only used by core code and the tomoyo which can't be a module either. Link: https://lkml.kernel.org/r/20210820095430.445242-1-hch@lst.deSigned-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
QiuXi authored
dump_vma_snapshot() allocs memory for *vma_meta, when dump_vma_snapshot() returns -EFAULT, the memory will be leaked, so we free it correctly. Link: https://lkml.kernel.org/r/20210810020441.62806-1-qiuxi1@huawei.com Fixes: a07279c9 ("binfmt_elf, binfmt_elf_fdpic: use a VMA list snapshot") Signed-off-by: QiuXi <qiuxi1@huawei.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Jann Horn <jannh@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
David Oberhollenzer authored
For obvious security reasons, a core dump is aborted if the filesystem cannot preserve ownership or permissions of the dump file. This affects filesystems like e.g. vfat, but also something like a 9pfs share in a Qemu test setup, running as a regular user, depending on the security model used. In those cases, the result is an empty core file and a confused user. To hopefully save other people a lot of time figuring out the cause, this patch adds a simple log message for those specific cases. [akpm@linux-foundation.org: s/|%s/%s/ in printk text] Link: https://lkml.kernel.org/r/20210701233151.102720-1-david.oberhollenzer@sigma-star.atSigned-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Zhen Lei authored
When the refcount is decreased to 0, the resource reclamation branch is entered. Before CPU0 reaches the race point (1), CPU1 may obtain the spinlock and traverse the rbtree to find 'root', see nilfs_lookup_root(). Although CPU1 will call refcount_inc() to increase the refcount, it is obviously too late. CPU0 will release 'root' directly, CPU1 then accesses 'root' and triggers UAF. Use refcount_dec_and_lock() to ensure that both the operations of decrease refcount to 0 and link deletion are lock protected eliminates this risk. CPU0 CPU1 nilfs_put_root(): <-------- (1) spin_lock(&nilfs->ns_cptree_lock); rb_erase(&root->rb_node, &nilfs->ns_cptree); spin_unlock(&nilfs->ns_cptree_lock); kfree(root); <-------- use-after-free refcount_t: underflow; use-after-free. WARNING: CPU: 2 PID: 9476 at lib/refcount.c:28 \ refcount_warn_saturate+0x1cf/0x210 lib/refcount.c:28 Modules linked in: CPU: 2 PID: 9476 Comm: syz-executor.0 Not tainted 5.10.45-rc1+ #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), ... RIP: 0010:refcount_warn_saturate+0x1cf/0x210 lib/refcount.c:28 ... ... Call Trace: __refcount_sub_and_test include/linux/refcount.h:283 [inline] __refcount_dec_and_test include/linux/refcount.h:315 [inline] refcount_dec_and_test include/linux/refcount.h:333 [inline] nilfs_put_root+0xc1/0xd0 fs/nilfs2/the_nilfs.c:795 nilfs_segctor_destroy fs/nilfs2/segment.c:2749 [inline] nilfs_detach_log_writer+0x3fa/0x570 fs/nilfs2/segment.c:2812 nilfs_put_super+0x2f/0xf0 fs/nilfs2/super.c:467 generic_shutdown_super+0xcd/0x1f0 fs/super.c:464 kill_block_super+0x4a/0x90 fs/super.c:1446 deactivate_locked_super+0x6a/0xb0 fs/super.c:335 deactivate_super+0x85/0x90 fs/super.c:366 cleanup_mnt+0x277/0x2e0 fs/namespace.c:1118 __cleanup_mnt+0x15/0x20 fs/namespace.c:1125 task_work_run+0x8e/0x110 kernel/task_work.c:151 tracehook_notify_resume include/linux/tracehook.h:188 [inline] exit_to_user_mode_loop kernel/entry/common.c:164 [inline] exit_to_user_mode_prepare+0x13c/0x170 kernel/entry/common.c:191 syscall_exit_to_user_mode+0x16/0x30 kernel/entry/common.c:266 do_syscall_64+0x45/0x80 arch/x86/entry/common.c:56 entry_SYSCALL_64_after_hwframe+0x44/0xa9 There is no reproduction program, and the above is only theoretical analysis. Link: https://lkml.kernel.org/r/1629859428-5906-1-git-send-email-konishi.ryusuke@gmail.com Fixes: ba65ae47 ("nilfs2: add checkpoint tree to nilfs object") Link: https://lkml.kernel.org/r/20210723012317.4146-1-thunder.leizhen@huawei.comSigned-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Nanyong Sun authored
kobject_put() should be used to cleanup the memory associated with the kobject instead of kobject_del(). See the section "Kobject removal" of "Documentation/core-api/kobject.rst". Link: https://lkml.kernel.org/r/20210629022556.3985106-7-sunnanyong@huawei.com Link: https://lkml.kernel.org/r/1625651306-10829-7-git-send-email-konishi.ryusuke@gmail.comSigned-off-by: Nanyong Sun <sunnanyong@huawei.com> Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Nanyong Sun authored
If kobject_init_and_add returns with error, kobject_put() is needed here to avoid memory leak, because kobject_init_and_add may return error without freeing the memory associated with the kobject it allocated. Link: https://lkml.kernel.org/r/20210629022556.3985106-6-sunnanyong@huawei.com Link: https://lkml.kernel.org/r/1625651306-10829-6-git-send-email-konishi.ryusuke@gmail.comSigned-off-by: Nanyong Sun <sunnanyong@huawei.com> Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Nanyong Sun authored
The kobject_put() should be used to cleanup the memory associated with the kobject instead of kobject_del. See the section "Kobject removal" of "Documentation/core-api/kobject.rst". Link: https://lkml.kernel.org/r/20210629022556.3985106-5-sunnanyong@huawei.com Link: https://lkml.kernel.org/r/1625651306-10829-5-git-send-email-konishi.ryusuke@gmail.comSigned-off-by: Nanyong Sun <sunnanyong@huawei.com> Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Nanyong Sun authored
If kobject_init_and_add return with error, kobject_put() is needed here to avoid memory leak, because kobject_init_and_add may return error without freeing the memory associated with the kobject it allocated. Link: https://lkml.kernel.org/r/20210629022556.3985106-4-sunnanyong@huawei.com Link: https://lkml.kernel.org/r/1625651306-10829-4-git-send-email-konishi.ryusuke@gmail.comSigned-off-by: Nanyong Sun <sunnanyong@huawei.com> Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Nanyong Sun authored
In nilfs_##name##_attr_release, kobj->parent should not be referenced because it is a NULL pointer. The release() method of kobject is always called in kobject_put(kobj), in the implementation of kobject_put(), the kobj->parent will be assigned as NULL before call the release() method. So just use kobj to get the subgroups, which is more efficient and can fix a NULL pointer reference problem. Link: https://lkml.kernel.org/r/20210629022556.3985106-3-sunnanyong@huawei.com Link: https://lkml.kernel.org/r/1625651306-10829-3-git-send-email-konishi.ryusuke@gmail.comSigned-off-by: Nanyong Sun <sunnanyong@huawei.com> Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Nanyong Sun authored
Patch series "nilfs2: fix incorrect usage of kobject". This patchset from Nanyong Sun fixes memory leak issues and a NULL pointer dereference issue caused by incorrect usage of kboject in nilfs2 sysfs implementation. This patch (of 6): Reported by syzkaller: BUG: memory leak unreferenced object 0xffff888100ca8988 (size 8): comm "syz-executor.1", pid 1930, jiffies 4294745569 (age 18.052s) hex dump (first 8 bytes): 6c 6f 6f 70 31 00 ff ff loop1... backtrace: kstrdup+0x36/0x70 mm/util.c:60 kstrdup_const+0x35/0x60 mm/util.c:83 kvasprintf_const+0xf1/0x180 lib/kasprintf.c:48 kobject_set_name_vargs+0x56/0x150 lib/kobject.c:289 kobject_add_varg lib/kobject.c:384 [inline] kobject_init_and_add+0xc9/0x150 lib/kobject.c:473 nilfs_sysfs_create_device_group+0x150/0x7d0 fs/nilfs2/sysfs.c:986 init_nilfs+0xa21/0xea0 fs/nilfs2/the_nilfs.c:637 nilfs_fill_super fs/nilfs2/super.c:1046 [inline] nilfs_mount+0x7b4/0xe80 fs/nilfs2/super.c:1316 legacy_get_tree+0x105/0x210 fs/fs_context.c:592 vfs_get_tree+0x8e/0x2d0 fs/super.c:1498 do_new_mount fs/namespace.c:2905 [inline] path_mount+0xf9b/0x1990 fs/namespace.c:3235 do_mount+0xea/0x100 fs/namespace.c:3248 __do_sys_mount fs/namespace.c:3456 [inline] __se_sys_mount fs/namespace.c:3433 [inline] __x64_sys_mount+0x14b/0x1f0 fs/namespace.c:3433 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae If kobject_init_and_add return with error, then the cleanup of kobject is needed because memory may be allocated in kobject_init_and_add without freeing. And the place of cleanup_dev_kobject should use kobject_put to free the memory associated with the kobject. As the section "Kobject removal" of "Documentation/core-api/kobject.rst" says, kobject_del() just makes the kobject "invisible", but it is not cleaned up. And no more cleanup will do after cleanup_dev_kobject, so kobject_put is needed here. Link: https://lkml.kernel.org/r/1625651306-10829-1-git-send-email-konishi.ryusuke@gmail.com Link: https://lkml.kernel.org/r/1625651306-10829-2-git-send-email-konishi.ryusuke@gmail.comReported-by: Hulk Robot <hulkci@huawei.com> Link: https://lkml.kernel.org/r/20210629022556.3985106-2-sunnanyong@huawei.comSigned-off-by: Nanyong Sun <sunnanyong@huawei.com> Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Kefeng Wang authored
There are some empty trap_init() definitions in different ARCHs, Introduce a new weak trap_init() function to clean them up. Link: https://lkml.kernel.org/r/20210812123602.76356-1-wangkefeng.wang@huawei.comSigned-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> [arm32] Acked-by: Vineet Gupta [arc] Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Stafford Horne <shorne@gmail.com> Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> Cc: Helge Deller <deller@gmx.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <palmerdabbelt@google.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Rasmus Villemoes authored
Currently, usermodehelper is enabled right before PID1 starts going through the initcalls. However, any call of a usermodehelper from a pure_, core_, postcore_, arch_, subsys_ or fs_ initcall is futile, as there is no filesystem contents yet. Up until commit e7cb072e ("init/initramfs.c: do unpacking asynchronously"), such calls, whether via some request_module(), a legacy uevent "/sbin/hotplug" notification or something else, would just fail silently with (presumably) -ENOENT from kernel_execve(). However, that commit introduced the wait_for_initramfs() synchronization hook which must be called from the usermodehelper exec path right before the kernel_execve, in order that request_module() et al done from *after* rootfs_initcall() time (i.e. device_ and late_ initcalls) would continue to find a populated initramfs as they used to. Any call of wait_for_initramfs() done before the unpacking has been scheduled (i.e. before rootfs_initcall time) must just return immediately [and let the caller find an empty file system] in order not to deadlock the machine. I mistakenly thought, and my limited testing confirmed, that there were no such calls, so I added a pr_warn_once() in wait_for_initramfs(). It turns out that one can indeed hit request_module() as well as kobject_uevent_env() during those early init calls, leading to a user-visible warning in the kernel log emitted consistently for certain configurations. We could just remove the pr_warn_once(), but I think it's better to postpone enabling the usermodehelper framework until there is at least some chance of finding the executable. That is also a little more efficient in that a lot of work done in umh.c will be elided. However, it does change the error seen by those early callers from -ENOENT to -EBUSY, so there is a risk of a regression if any caller care about the exact error value. Link: https://lkml.kernel.org/r/20210728134638.329060-1-linux@rasmusvillemoes.dk Fixes: e7cb072e ("init/initramfs.c: do unpacking asynchronously") Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reported-by: Alexander Egorenkov <egorenar@linux.ibm.com> Reported-by: Bruno Goncalves <bgoncalv@redhat.com> Reported-by: Heiner Kallweit <hkallweit1@gmail.com> Cc: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Nicholas Piggin authored
This counter tracks the number of watches a user has, to compare against the 'max_user_watches' limit. This causes a scalability bottleneck on SPECjbb2015 on large systems as there is only one user. Changing to a per-cpu counter increases throughput of the benchmark by about 30% on a 16-socket, > 1000 thread system. [rdunlap@infradead.org: fix build errors in kernel/user.c when CONFIG_EPOLL=n] [npiggin@gmail.com: move ifdefs into wrapper functions, slightly improve panic message] Link: https://lkml.kernel.org/r/1628051945.fens3r99ox.astroid@bobo.none [akpm@linux-foundation.org: tweak user_epoll_alloc(), per Guenter] Link: https://lkml.kernel.org/r/20210804191421.GA1900577@roeck-us.net Link: https://lkml.kernel.org/r/20210802032013.2751916-1-npiggin@gmail.comSigned-off-by: Nicholas Piggin <npiggin@gmail.com> Reported-by: Anton Blanchard <anton@ozlabs.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Joe Perches authored
The preferred git commit id reference has the form commit <SHA-1> ("Title line") where SHA-1 is the commit hex hash with a minimum lenth of 12 and ("Title line") is the complete title line of the commit with a (" prefix and ") suffix. The current tests fail when the "Title line" has one or more embedded double quotes. Improve the test that finds the commit SHA-1 hex hash then ("Title line") by using $balanced_parens for a maximum of 3 consecutive lines. [akpm@linux-foundation.org: add missing &&] Link: https://lkml.kernel.org/r/976c6cdd680db4b55ae31b5fc2d1779da5c0dc66.camel@perches.comSigned-off-by: Joe Perches <joe@perches.com> Cc: Dwaipayan Ray <dwaipayanray1@gmail.com> Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com> Cc: Denis Efremov <efremov@linux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Mimi Zohar authored
Instead of checkpatch requiring the patch author to exactly match the signed-off-by tag, commit 48ca2d8a ("checkpatch: add new warnings to author signoff checks.") safely relaxed this requirement. Although the local-part of an email address (local-part@domain), may be case sensitive, exploiting the case sensitivity of mailbox local-parts impedes interoperability and is discouraged. Mailbox domains follow normal DNS rules and are hence not case sensitive. (Refer to https://datatracker.ietf.org/doc/html/rfc5321#section-2.4.) Further relax the patch author and signed-off-by tag comparison by making the email address check case insensitive. Link: https://lkml.kernel.org/r/20210816112725.173206-1-zohar@linux.ibm.comSigned-off-by: Mimi Zohar <zohar@linux.ibm.com> Acked-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Joe Perches authored
Allow prefixing typical strings with L for wide strings and u for unicode strings. Link: https://lkml.kernel.org/r/20210801170733.1.I3f9784fd3c1007d08ec2e70b151d137687575495@changeidSigned-off-by: Joe Perches <joe@perches.com> Signed-off-by: Simon Glass <sjg@chromium.org> Cc: Dwaipayan Ray <dwaipayanray1@gmail.com> Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Andy Shevchenko authored
Rename bitmap_alloc() to bitmap_zalloc() in tools to follow the bitmap API in the kernel. No functional changes intended. Link: https://lkml.kernel.org/r/20210814211713.180533-14-yury.norov@gmail.comSigned-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Yury Norov <yury.norov@gmail.com> Suggested-by: Yury Norov <yury.norov@gmail.com> Acked-by: Yury Norov <yury.norov@gmail.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Lobakin <alobakin@pm.me> Cc: Alexey Klimov <aklimov@redhat.com> Cc: Dennis Zhou <dennis@kernel.org> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Randy Dunlap authored
Fix all kernel-doc warnings in lib/iov_iter.c: lib/iov_iter.c:695: warning: Function parameter or member 'i' not described in '_copy_mc_to_iter' lib/iov_iter.c:695: warning: Excess function parameter 'iter' description in '_copy_mc_to_iter' lib/iov_iter.c:695: warning: No description found for return value of '_copy_mc_to_iter' lib/iov_iter.c:758: warning: Function parameter or member 'i' not described in '_copy_from_iter_flushcache' lib/iov_iter.c:758: warning: Excess function parameter 'iter' description in '_copy_from_iter_flushcache' lib/iov_iter.c:758: warning: No description found for return value of '_copy_from_iter_flushcache' Link: https://lkml.kernel.org/r/20210809051053.6531-1-rdunlap@infradead.orgSigned-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Randy Dunlap authored
Fix kernel-doc warnings in dump_stack.c: lib/dump_stack.c:97: warning: Function parameter or member 'log_lvl' not described in 'dump_stack_lvl' lib/dump_stack.c:97: warning: expecting prototype for dump_stack(). Prototype was for dump_stack_lvl() instead Link: https://lkml.kernel.org/r/20210809051643.17567-1-rdunlap@infradead.orgSigned-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Daniel Latypov authored
This follows up commit ebd09577 ("lib/test: convert lib/test_list_sort.c to use KUnit"). Converting this test to KUnit makes the test a bit shorter, standardizes how it reports pass/fail, and adds an easier way to run the test [1]. Like ebd09577, this leaves the file and Kconfig option name the same, but slightly changes their dependencies (needs CONFIG_KUNIT). [1] Can be run via $ ./tools/testing/kunit/kunit.py run --kunitconfig /dev/stdin <<EOF CONFIG_KUNIT=y CONFIG_TEST_SORT=y EOF [11:30:27] Starting KUnit Kernel ... [11:30:30] ============================================================ [11:30:30] ======== [PASSED] lib_sort ======== [11:30:30] [PASSED] test_sort [11:30:30] ============================================================ [11:30:30] Testing complete. 1 tests run. 0 failed. 0 crashed. 0 skipped. [11:30:30] Elapsed time: 37.032s total, 0.001s configuring, 34.090s building, 0.000s running Note: this is the time it took after a `make mrproper`. With an incremental rebuild, this looks more like: [11:38:58] Elapsed time: 6.444s total, 0.001s configuring, 3.416s building, 0.000s running Since the test has no dependencies, it can also be run (with some other tests) with just: $ ./tools/testing/kunit/kunit.py run Link: https://lkml.kernel.org/r/20210715232441.1380885-1-dlatypov@google.comSigned-off-by: Daniel Latypov <dlatypov@google.com> Cc: Pravin Shedge <pravin.shedge4linux@gmail.com> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Gow <davidgow@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Geert Uytterhoeven authored
RATIONAL_KUNIT_TEST selects RATIONAL, thus enabling an optional feature the user may not want to have enabled. Fix this by making the test depend on RATIONAL instead. Link: https://lkml.kernel.org/r/20210706100945.3803694-3-geert@linux-m68k.org Fixes: b6c75c4a ("lib/math/rational: add Kunit test cases") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Trent Piepho <tpiepho@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Geert Uytterhoeven authored
Patch series "math: RATIONAL and RATIONAL_KUNIT_TEST improvements". This series makes the RATIONAL symbol tristate, so it is not forced builtin if all users are modular, and makes the RATIONAL_KUNIT_TEST depend on RATIONAL, to avoid enabling RATIONAL if there are no real users. This patch (of 2): All but one symbols that select RATIONAL are tristate, but RATIONAL itself is bool. Change it to tristate, so the rational fractions support code can be modular if no builtin code relies on it. Link: https://lkml.kernel.org/r/20210706100945.3803694-1-geert@linux-m68k.org Link: https://lkml.kernel.org/r/20210706100945.3803694-2-geert@linux-m68k.orgSigned-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Trent Piepho <tpiepho@gmail.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Nathan Chancellor authored
This should have been done with commit 91ed3ed0 ("MAINTAINERS: update ClangBuiltLinux IRC chat") but I did not realize it was in two separate spots. Link: https://lkml.kernel.org/r/20210825211823.6406-3-nathan@kernel.orgSigned-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Cc: Kees Cook <keescook@chromium.org> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Sami Tolvanen <samitolvanen@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Nathan Chancellor authored
We are now at llvm@lists.linux.dev. Link: https://lkml.kernel.org/r/20210825211823.6406-2-nathan@kernel.orgSigned-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Cc: Kees Cook <keescook@chromium.org> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Sami Tolvanen <samitolvanen@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Nathan Chancellor authored
We are now at llvm@lists.linux.dev. Link: https://lkml.kernel.org/r/20210825211823.6406-1-nathan@kernel.orgSigned-off-by: Nathan Chancellor <nathan@kernel.org> Acked-by: Nick Desaulniers <ndesaulniers@google.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Sami Tolvanen <samitolvanen@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Pavel Skripkin authored
Syzbot reported shift-out-of-bounds bug in profile_init(). The problem was in incorrect prof_shift. Since prof_shift value comes from userspace we need to clamp this value into [0, BITS_PER_LONG -1] boundaries. Second possible shiht-out-of-bounds was found by Tetsuo: sample_step local variable in read_profile() had "unsigned int" type, but prof_shift allows to make a BITS_PER_LONG shift. So, to prevent possible shiht-out-of-bounds sample_step type was changed to "unsigned long". Also, "unsigned short int" will be sufficient for storing [0, BITS_PER_LONG] value, that's why there is no need for "unsigned long" prof_shift. Link: https://lkml.kernel.org/r/20210813140022.5011-1-paskripkin@gmail.com Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-and-tested-by: syzbot+e68c89a9510c159d9684@syzkaller.appspotmail.com Suggested-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Yang Yang authored
Use rlimit() helper instead of manually writing whole chain from task to rlimit value. See patch "posix-cpu-timers: Use dedicated helper to access rlimit values". Link: https://lkml.kernel.org/r/20210728030822.524789-1-yang.yang29@zte.com.cnSigned-off-by: Yang Yang <yang.yang29@zte.com.cn> Reported-by: Zeal Robot <zealci@zte.com.cn> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: sh_def@163.com <sh_def@163.com> Cc: Yang Yang <yang.yang29@zte.com.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Daniel Lezcano authored
HZ unit conversion macros are available in units.h, use them and remove the duplicate definition. Link: https://lkml.kernel.org/r/20210816114732.1834145-11-daniel.lezcano@linaro.orgSigned-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Chanwoo Choi <cw00.choi@samsung.com> Cc: Christian Eggers <ceggers@arri.de> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Lukasz Luba <lukasz.luba@arm.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Peter Meerwald <pmeerw@pmeerw.net> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Daniel Lezcano authored
HZ unit conversion macros are available in units.h, use them and remove the duplicate definition. Link: https://lkml.kernel.org/r/20210816114732.1834145-10-daniel.lezcano@linaro.orgSigned-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Chanwoo Choi <cw00.choi@samsung.com> Cc: Christian Eggers <ceggers@arri.de> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Lukasz Luba <lukasz.luba@arm.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Peter Meerwald <pmeerw@pmeerw.net> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Daniel Lezcano authored
HZ unit conversion macros are available in units.h, use them and remove the duplicate definition. Link: https://lkml.kernel.org/r/20210816114732.1834145-9-daniel.lezcano@linaro.orgSigned-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Chanwoo Choi <cw00.choi@samsung.com> Cc: Christian Eggers <ceggers@arri.de> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Lukasz Luba <lukasz.luba@arm.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Peter Meerwald <pmeerw@pmeerw.net> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Daniel Lezcano authored
HZ unit conversion macros are available in units.h, use them and remove the duplicate definition. Link: https://lkml.kernel.org/r/20210816114732.1834145-8-daniel.lezcano@linaro.orgSigned-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Chanwoo Choi <cw00.choi@samsung.com> Cc: Christian Eggers <ceggers@arri.de> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Lukasz Luba <lukasz.luba@arm.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Peter Meerwald <pmeerw@pmeerw.net> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Daniel Lezcano authored
HZ unit conversion macros are available in units.h, use them and remove the duplicate definition. The new macro is an unsigned long. The code dealing with it is considering as an unsigned long also. Link: https://lkml.kernel.org/r/20210816114732.1834145-7-daniel.lezcano@linaro.orgSigned-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Christian Eggers <ceggers@arri.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Cc: Chanwoo Choi <cw00.choi@samsung.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Lukasz Luba <lukasz.luba@arm.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Peter Meerwald <pmeerw@pmeerw.net> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Daniel Lezcano authored
HZ unit conversion macros are available in units.h, use them and remove the duplicate definition. Link: https://lkml.kernel.org/r/20210816114732.1834145-6-daniel.lezcano@linaro.orgSigned-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Christian Eggers <ceggers@arri.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Chanwoo Choi <cw00.choi@samsung.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Lukasz Luba <lukasz.luba@arm.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Peter Meerwald <pmeerw@pmeerw.net> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-