- 15 Apr, 2016 8 commits
-
-
Ganapatrao Kulkarni authored
Enable NUMA balancing for arm64 platforms. Add pte, pmd protnone helpers for use by automatic NUMA balancing. Reviewed-by:
Steve Capper <steve.capper@arm.com> Reviewed-by:
Robert Richter <rrichter@cavium.com> Signed-off-by:
Ganapatrao Kulkarni <gkulkarni@caviumnetworks.com> Signed-off-by:
David Daney <david.daney@cavium.com> Signed-off-by:
Will Deacon <will.deacon@arm.com>
-
Ganapatrao Kulkarni authored
Attempt to get the memory and CPU NUMA node via of_numa. If that fails, default the dummy NUMA node and map all memory and CPUs to node 0. Tested-by:
Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by:
Robert Richter <rrichter@cavium.com> Signed-off-by:
Ganapatrao Kulkarni <gkulkarni@caviumnetworks.com> Signed-off-by:
David Daney <david.daney@cavium.com> Signed-off-by:
Will Deacon <will.deacon@arm.com>
-
David Daney authored
In order to extract NUMA information from the device tree, we need to have the tree in its unflattened form. Move the call to bootmem_init() in the tail of paging_init() into setup_arch, and adjust header files so that its declaration is visible. Move the unflatten_device_tree() call between the calls to paging_init() and bootmem_init(). Follow on patches add NUMA handling to bootmem_init(). Signed-off-by:
David Daney <david.daney@cavium.com> Signed-off-by:
Will Deacon <will.deacon@arm.com>
-
David Daney authored
Add device tree parsing for NUMA topology using device "numa-node-id" property in distance-map and cpu nodes. This is a complete rewrite of a previous patch by: Ganapatrao Kulkarni<gkulkarni@caviumnetworks.com> Signed-off-by:
David Daney <david.daney@cavium.com> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Will Deacon <will.deacon@arm.com>
-
Ganapatrao Kulkarni authored
Add DT bindings for numa mapping of memory, CPUs and IOs. Reviewed-by:
Robert Richter <rrichter@cavium.com> Signed-off-by:
Ganapatrao Kulkarni <gkulkarni@caviumnetworks.com> Signed-off-by:
David Daney <david.daney@cavium.com> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Will Deacon <will.deacon@arm.com>
-
Ard Biesheuvel authored
There are two problems with the UEFI stub DT memory node removal routine: - it deletes nodes as it traverses the tree, which happens to work but is not supported, as deletion invalidates the node iterator; - deleting memory nodes entirely may discard annotations in the form of additional properties on the nodes. Since the discovery of DT memory nodes occurs strictly before the UEFI init sequence, we can simply clear the memblock memory table before parsing the UEFI memory map. This way, it is no longer necessary to remove the nodes, so we can remove that logic from the stub as well. Reviewed-by:
Matt Fleming <matt@codeblueprint.co.uk> Acked-by:
Steve Capper <steve.capper@arm.com> Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
David Daney <david.daney@cavium.com> Signed-off-by:
Will Deacon <will.deacon@arm.com>
-
Suzuki K Poulose authored
With a VHE capable CPU, kernel can run at EL2 and is a decided at early boot. If some of the CPUs didn't start it EL2 or doesn't have VHE, we could have CPUs running at different exception levels, all in the same kernel! This patch adds an early check for the secondary CPUs to detect such situations. For each non-boot CPU add a sanity check to make sure we don't have different run levels w.r.t the boot CPU. We save the information on whether the boot CPU is running in hyp mode or not and ensure the remaining CPUs match it. Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Suzuki K Poulose <suzuki.poulose@arm.com> [will: made boot_cpu_hyp_mode static] Signed-off-by:
Will Deacon <will.deacon@arm.com>
-
Suzuki K Poulose authored
During the activation of a secondary CPU, we could report serious configuration issues and hence request to crash the kernel. We do this for CPU ASID bit check now. We will need it also for handling mismatched exception levels for the CPUs with VHE. Hence, add a helper to do the same for reusability. Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com>
-
- 14 Apr, 2016 18 commits
-
-
James Morse authored
With CONFIG_PROVE_LOCKING, CONFIG_DEBUG_LOCKDEP and CONFIG_TRACE_IRQFLAGS enabled, lockdep will compare current->hardirqs_enabled with the flags from local_irq_save(). When a debug exception occurs, interrupts are disabled in entry.S, but lockdep isn't told, resulting in: DEBUG_LOCKS_WARN_ON(current->hardirqs_enabled) ------------[ cut here ]------------ WARNING: at ../kernel/locking/lockdep.c:3523 Modules linked in: CPU: 3 PID: 1752 Comm: perf Not tainted 4.5.0-rc4+ #2204 Hardware name: ARM Juno development board (r1) (DT) task: ffffffc974868000 ti: ffffffc975f40000 task.ti: ffffffc975f40000 PC is at check_flags.part.35+0x17c/0x184 LR is at check_flags.part.35+0x17c/0x184 pc : [<ffffff80080fc93c>] lr : [<ffffff80080fc93c>] pstate: 600003c5 [...] ---[ end trace 74631f9305ef5020 ]--- Call trace: [<ffffff80080fc93c>] check_flags.part.35+0x17c/0x184 [<ffffff80080ffe30>] lock_acquire+0xa8/0xc4 [<ffffff8008093038>] breakpoint_handler+0x118/0x288 [<ffffff8008082434>] do_debug_exception+0x3c/0xa8 [<ffffff80080854b4>] el1_dbg+0x18/0x6c [<ffffff80081e82f4>] do_filp_open+0x64/0xdc [<ffffff80081d6e60>] do_sys_open+0x140/0x204 [<ffffff80081d6f58>] SyS_openat+0x10/0x18 [<ffffff8008085d30>] el0_svc_naked+0x24/0x28 possible reason: unannotated irqs-off. irq event stamp: 65857 hardirqs last enabled at (65857): [<ffffff80081fb1c0>] lookup_mnt+0xf4/0x1b4 hardirqs last disabled at (65856): [<ffffff80081fb188>] lookup_mnt+0xbc/0x1b4 softirqs last enabled at (65790): [<ffffff80080bdca4>] __do_softirq+0x1f8/0x290 softirqs last disabled at (65757): [<ffffff80080be038>] irq_exit+0x9c/0xd0 This patch adds the annotations to do_debug_exception(), while trying not to call trace_hardirqs_off() if el1_dbg() interrupted a task that already had irqs disabled. Signed-off-by:
James Morse <james.morse@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com>
-
Anna-Maria Gleixner authored
Since commit 1cf4f629 ("cpu/hotplug: Move online calls to hotplugged cpu") it is ensured that callbacks of CPU_ONLINE and CPU_DOWN_PREPARE are processed on the hotplugged CPU. Due to this SMP function calls are no longer required. Replace smp_call_function_single() with a direct call of hw_breakpoint_reset(). To keep the calling convention, interrupts are explicitly disabled around the call. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by:
Anna-Maria Gleixner <anna-maria@linutronix.de> Signed-off-by:
Will Deacon <will.deacon@arm.com>
-
Anna-Maria Gleixner authored
Since commit 1cf4f629 ("cpu/hotplug: Move online calls to hotplugged cpu") it is ensured that callbacks of CPU_ONLINE and CPU_DOWN_PREPARE are processed on the hotplugged CPU. Due to this SMP function calls are no longer required. Replace smp_call_function_single() with a direct call to clear_os_lock(). The function writes the OSLAR register to clear OS locking. This does not require to be called with interrupts disabled, therefore the smp_call_function_single() calling convention is not preserved. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by:
Anna-Maria Gleixner <anna-maria@linutronix.de> Signed-off-by:
Will Deacon <will.deacon@arm.com>
-
Ard Biesheuvel authored
The mapping of the kernel consist of four segments, each of which is mapped with different permission attributes and/or lifetimes. To optimize the TLB and translation table footprint, we define various opaque constants in the linker script that resolve to different aligment values depending on the page size and whether CONFIG_DEBUG_ALIGN_RODATA is set. Considering that - a 4 KB granule kernel benefits from a 64 KB segment alignment (due to the fact that it allows the use of the contiguous bit), - the minimum alignment of the .data segment is THREAD_SIZE already, not PAGE_SIZE (i.e., we already have padding between _data and the start of the .data payload in many cases), - 2 MB is a suitable alignment value on all granule sizes, either for mapping directly (level 2 on 4 KB), or via the contiguous bit (level 3 on 16 KB and 64 KB), - anything beyond 2 MB exceeds the minimum alignment mandated by the boot protocol, and can only be mapped efficiently if the physical alignment happens to be the same, we can simplify this by standardizing on 64 KB (or 2 MB) explicitly, i.e., regardless of granule size, all segments are aligned either to 64 KB, or to 2 MB if CONFIG_DEBUG_ALIGN_RODATA=y. This also means we can drop the Kconfig dependency of CONFIG_DEBUG_ALIGN_RODATA on CONFIG_ARM64_4K_PAGES. Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Will Deacon <will.deacon@arm.com>
-
Ard Biesheuvel authored
Keeping .head.text out of the .text mapping buys us very little: its actual payload is only 4 KB, most of which is padding, but the page alignment may add up to 2 MB (in case of CONFIG_DEBUG_ALIGN_RODATA=y) of additional padding to the uncompressed kernel Image. Also, on 4 KB granule kernels, the 4 KB misalignment of .text forces us to map the adjacent 56 KB of code without the PTE_CONT attribute, and since this region contains things like the vector table and the GIC interrupt handling entry point, this region is likely to benefit from the reduced TLB pressure that results from PTE_CONT mappings. So remove the alignment between the .head.text and .text sections, and use the [_text, _etext) rather than the [_stext, _etext) interval for mapping the .text segment. Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Will Deacon <will.deacon@arm.com>
-
Ard Biesheuvel authored
Apart from the arm64/linux and EFI header data structures, there is nothing in the .head.text section that must reside at the beginning of the Image. So let's move it to the .init section where it belongs. Note that this involves some minor tweaking of the EFI header, primarily because the address of 'stext' no longer coincides with the start of the .text section. It also requires a couple of relocated symbol references to be slightly rewritten or their definition moved to the linker script. Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Will Deacon <will.deacon@arm.com>
-
Ard Biesheuvel authored
Replace the poorly defined term chunk with segment, which is a term that is already used by the ELF spec to describe contiguous mappings with the same permission attributes of statically allocated ranges of an executable. Acked-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Will Deacon <will.deacon@arm.com>
-
Ard Biesheuvel authored
Now that the vmemmap region has been redefined to cover the linear region rather than the entire physical address space, we no longer need to perform a virtual-to-physical translation in the implementaion of virt_to_page(). This restricts virt_to_page() translations to the linear region, so redefine virt_addr_valid() as well. Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Will Deacon <will.deacon@arm.com>
-
Ard Biesheuvel authored
This moves the vmemmap region right below PAGE_OFFSET, aka the start of the linear region, and redefines its size to be a power of two. Due to the placement of PAGE_OFFSET in the middle of the address space, whose size is a power of two as well, this guarantees that virt to page conversions and vice versa can be implemented efficiently, by masking and shifting rather than ordinary arithmetic. Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Will Deacon <will.deacon@arm.com>
-
Ard Biesheuvel authored
Before restricting virt_to_page() to the linear mapping, ensure that the text patching code does not use it to resolve references into the core kernel text, which is mapped in the vmalloc area. Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Will Deacon <will.deacon@arm.com>
-
Ard Biesheuvel authored
The zero page is statically allocated, so grab its struct page pointer without using virt_to_page(), which will be restricted to the linear mapping later. Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Will Deacon <will.deacon@arm.com>
-
Ard Biesheuvel authored
The implementation of free_initmem_default() expects __init_begin and __init_end to be covered by the linear mapping, which is no longer the case. So open code it instead, using addresses that are explicitly translated from kernel virtual to linear virtual. Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Will Deacon <will.deacon@arm.com>
-
Ard Biesheuvel authored
The translation performed by virt_to_page() is only valid for linear addresses, and kernel symbols are no longer in the linear mapping. So perform the __pa() translation explicitly, which does the right thing in either case, and only then translate to a struct page offset. Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Will Deacon <will.deacon@arm.com>
-
Ard Biesheuvel authored
This removes the relocate_initrd() implementation and invocation, which are no longer needed now that the placement of the initrd is guaranteed to be covered by the linear mapping. Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Will Deacon <will.deacon@arm.com>
-
Ard Biesheuvel authored
Instead of going out of our way to relocate the initrd if it turns out to occupy memory that is not covered by the linear mapping, just add the initrd to the linear mapping. This puts the burden on the bootloader to pass initrd= and mem= options that are mutually consistent. Note that, since the placement of the linear region in the PA space is also dependent on the placement of the kernel Image, which may reside anywhere in memory, we may still end up with a situation where the initrd and the kernel Image are simply too far apart to be covered by the linear region. Since we now leave it up to the bootloader to pass the initrd in memory that is guaranteed to be accessible by the kernel, add a mention of this to the arm64 boot protocol specification as well. Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Will Deacon <will.deacon@arm.com>
-
Ard Biesheuvel authored
This reverts commit 36e5cd6b, since the section alignment is now guaranteed by construction when choosing the value of memstart_addr. Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Will Deacon <will.deacon@arm.com>
-
Ard Biesheuvel authored
This redefines ARM64_MEMSTART_ALIGN in terms of the minimal alignment required by sparsemem vmemmap. This comes down to using 1 GB for all translation granules if CONFIG_SPARSEMEM_VMEMMAP is enabled. Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Will Deacon <will.deacon@arm.com>
-
Ard Biesheuvel authored
After choosing memstart_addr to be the highest multiple of ARM64_MEMSTART_ALIGN less than or equal to the first usable physical memory address, we clip the memblocks to the maximum size of the linear region. Since the kernel may be high up in memory, we take care not to clip the kernel itself, which means we have to clip some memory from the bottom if this occurs, to ensure that the distance between the first and the last usable physical memory address can be covered by the linear region. However, we fail to update memstart_addr if this clipping from the bottom occurs, which means that we may still end up with virtual addresses that wrap into the userland range. So increment memstart_addr as appropriate to prevent this from happening. Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Will Deacon <will.deacon@arm.com>
-
- 13 Apr, 2016 2 commits
-
-
Jisheng Zhang authored
Currently, we check two pointers: cpu_ops and cpu_suspend on every idle state entry. These pointers check can be avoided: If cpu_ops has not been registered, arm_cpuidle_init() will return -EOPNOTSUPP, so arm_cpuidle_suspend() will never have chance to run. In other word, the cpu_ops check can be avoid. Similarly, the cpu_suspend check could be avoided in this hot path by moving it into arm_cpuidle_init(). I measured the 4096 * time from arm_cpuidle_suspend entry point to the cpu_psci_cpu_suspend entry point. HW platform is Marvell BG4CT STB board. 1. only one shell, no other process, hot-unplug secondary cpus, execute the following cmd while true do sleep 0.2 done before the patch: 1581220ns after the patch: 1579630ns reduced by 0.1% 2. only one shell, no other process, hot-unplug secondary cpus, execute the following cmd while true do md5sum /tmp/testfile sleep 0.2 done NOTE: the testfile size should be larger than L1+L2 cache size before the patch: 1961960ns after the patch: 1912500ns reduced by 2.5% So the more complex the system load, the bigger the improvement. Signed-off-by:
Jisheng Zhang <jszhang@marvell.com> Acked-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com>
-
Kefeng Wang authored
There are some new cpu features which can be identified by id_aa64mmfr2, this patch appends all fields of it. Signed-off-by:
Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by:
Will Deacon <will.deacon@arm.com>
-
- 11 Apr, 2016 4 commits
-
-
Linus Torvalds authored
-
git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds authored
Pull ARM fixes from Russell King: "A couple of small fixes, and wiring up the new syscalls which appeared during the merge window" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8550/1: protect idiv patching against undefined gcc behavior ARM: wire up preadv2 and pwritev2 syscalls ARM: SMP enable of cache maintanence broadcast
-
git://git.linaro.org/people/ulf.hansson/mmcLinus Torvalds authored
Pull MMC fixes from Ulf Hansson: "Here are a couple of mmc fixes intended for v4.6 rc3: MMC host: - sdhci: Fix regression setting power on Trats2 board - sdhci-pci: Add support and PCI IDs for more Broxton host controllers" * tag 'mmc-v4.6-rc1' of git://git.linaro.org/people/ulf.hansson/mmc: mmc: sdhci-pci: Add support and PCI IDs for more Broxton host controllers mmc: sdhci: Fix regression setting power on Trats2 board
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: "Some bugfixes from I2C: - fix a uevent triggered boot problem by removing a useless debug print - fix sysfs-attributes of the new i2c-demux-pinctrl driver to follow standard kernel behaviour - fix a potential division-by-zero error (needed two takes)" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: jz4780: really prevent potential division by zero Revert "i2c: jz4780: prevent potential division by zero" i2c: jz4780: prevent potential division by zero i2c: mux: demux-pinctrl: Update docs to new sysfs-attributes i2c: mux: demux-pinctrl: Clean up sysfs attributes i2c: prevent endless uevent loop with CONFIG_I2C_DEBUG_CORE
-
- 10 Apr, 2016 1 commit
-
-
Linus Torvalds authored
This reverts commit 1028b55b. It's broken: it makes ext4 return an error at an invalid point, causing the readdir wrappers to write the the position of the last successful directory entry into the position field, which means that the next readdir will now return that last successful entry _again_. You can only return fatal errors (that terminate the readdir directory walk) from within the filesystem readdir functions, the "normal" errors (that happen when the readdir buffer fills up, for example) happen in the iterorator where we know the position of the actual failing entry. I do have a very different patch that does the "signal_pending()" handling inside the iterator function where it is allowable, but while that one passes all the sanity checks, I screwed up something like four times while emailing it out, so I'm not going to commit it today. So my track record is not good enough, and the stars will have to align better before that one gets committed. And it would be good to get some review too, of course, since celestial alignments are always an iffy debugging model. IOW, let's just revert the commit that caused the problem for now. Reported-by:
Greg Thelen <gthelen@google.com> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- 09 Apr, 2016 7 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linuxLinus Torvalds authored
Pull parisc fixes from Helge Deller: "Since commit 0de79858 ("parisc: Use generic extable search and sort routines") module loading is boken on parisc, because the parisc module loader wasn't prepared for the new R_PARISC_PCREL32 relocations. In addition, due to that breakage, Mikulas Patocka noticed that handling exceptions from modules probably never worked on parisc. It was just masked by the fact that exceptions from modules don't happen during normal use. This patch series fixes those issues and survives the tests of the lib/test_user_copy kernel module test. Some patches are tagged for stable" * 'parisc-4.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Update comment regarding relative extable support parisc: Unbreak handling exceptions from kernel modules parisc: Fix kernel crash with reversed copy_from_user() parisc: Avoid function pointers for kernel exception routines parisc: Handle R_PARISC_PCREL32 relocations in kernel modules
-
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimmLinus Torvalds authored
Pull libnvdimm fixes from Dan Williams: "Three fixes, the first two are tagged for -stable: - The ndctl utility/library gained expanded unit tests illuminating a long standing bug in the libnvdimm SMART data retrieval implementation. It has been broken since its initial implementation, now fixed. - Another one line fix for the detection of stale info blocks. Without this change userspace can get into a situation where it is unable to reconfigure a namespace. - Fix the badblock initialization path in the presence of the new (in v4.6-rc1) section alignment workarounds. Without this change badblocks will be reported at the wrong offset. These have received a build success report from the kbuild robot and have appeared in -next with no reported issues" * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: libnvdimm, pfn: fix nvdimm_namespace_add_poison() vs section alignment libnvdimm, pfn: fix uuid validation libnvdimm: fix smart data retrieval
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpioLinus Torvalds authored
Pull GPIO fixes from Linus Walleij: "Here is a set of four GPIO fixes. The two fixes to the core are serious as they are regressing minor architectures. Core fixes: - Defer GPIO device setup until after gpiolib is initialized. It turns out that a few very tightly integrated GPIO platform drivers initialize so early (befor core_initcall()) so that the gpiolib isn't even initialized itself. That limits what the library can do, and we cannot reference uninitialized fields until later. Defer some of the initialization until right after the gpiolib is initialized in these (rare) cases. - As a consequence: do not use devm_* resources when allocating the states in the initial set-up of the gpiochip. Driver fixes: - In ACPI retrieveal: ignore GpioInt when looking for output GPIOs. - Fix legacy builds on the PXA without a backing pin controller. - Use correct datatype on pca953x register writes" * tag 'gpio-v4.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: pca953x: Use correct u16 value for register word write gpiolib: Defer gpio device setup until after gpiolib initialization gpiolib: Do not use devm functions when registering gpio chip gpio: pxa: fix legacy non pinctrl aware builds gpio / ACPI: ignore GpioInt() GPIOs when requesting GPIO_OUT_*
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty fixes from Greg KH: "Here are two tty fixes for issues found. One was due to a merge error in 4.6-rc1, and the other a regression fix for UML consoles that broke in 4.6-rc1. Both have been in linux-next for a while" * tag 'tty-4.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: Fix merge of "tty: Refactor tty_open()" tty: Fix UML console breakage
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here are some USB fixes and new device ids for 4.6-rc3. Nothing major, the normal USB gadget fixes and usb-serial driver ids, along with some other fixes mixed in. All except the USB serial ids have been tested in linux-next, the id additions should be fine as they are 'trivial'" * tag 'usb-4.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (25 commits) USB: option: add "D-Link DWM-221 B1" device id USB: serial: cp210x: Adding GE Healthcare Device ID USB: serial: ftdi_sio: Add support for ICP DAS I-756xU devices usb: dwc3: keystone: drop dma_mask configuration usb: gadget: udc-core: remove manual dma configuration usb: dwc3: pci: add ID for one more Intel Broxton platform usb: renesas_usbhs: fix to avoid using a disabled ep in usbhsg_queue_done() usb: dwc2: do not override forced dr_mode in gadget setup usb: gadget: f_midi: unlock on error USB: digi_acceleport: do sanity checking for the number of ports USB: cypress_m8: add endpoint sanity check USB: mct_u232: add sanity checking in probe usb: fix regression in SuperSpeed endpoint descriptor parsing USB: usbip: fix potential out-of-bounds write usb: renesas_usbhs: disable TX IRQ before starting TX DMAC transfer usb: renesas_usbhs: avoid NULL pointer derefernce in usbhsf_pkt_handler() usb: gadget: f_midi: Fixed a bug when buflen was smaller than wMaxPacketSize usb: phy: qcom-8x16: fix regulator API abuse usb: ch9: Fix SSP Device Cap wFunctionalitySupport type usb: gadget: composite: Access SSP Dev Cap fields properly ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging and IIO driver fixes from Greg KH: "Here are some IIO driver fixes, along with two staging driver fixes for 4.6-rc3. One staging driver patch reverts the deletion of a driver that happened in 4.6-rc1. We thought that laptop.org was dead, but it's still alive and kicking, and has users that were mad we broke their hardware by deleting a driver for their machines. So that driver is added back and everyone is happy again. All of these have been in linux-next for a while with no reported issues" * tag 'staging-4.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: Revert "Staging: olpc_dcon: Remove obsolete driver" staging/rdma/hfi1: select CRC32 iio: gyro: bmg160: fix buffer read values iio: gyro: bmg160: fix endianness when reading axes iio: accel: bmc150: fix endianness when reading axes iio: st_magn: always define ST_MAGN_TRIGGER_SET_STATE iio: fix config watermark initial value iio: health: max30100: correct FIFO check condition iio: imu: Fix inv_mpu6050 dependencies iio: adc: Fix build error of missing devm_ioremap_resource on UM iio: light: apds9960: correct FIFO check condition iio: adc: max1363: correct reference voltage iio: adc: max1363: add missing adc to max1363_id
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "This is a set of eight fixes. Two are trivial gcc-6 updates (brace additions and unused variable removal). There's a couple of cxlflash regressions, a correction for sd being overly chatty on revalidation (causing excess log increases). A VPD issue which could crash USB devices because they seem very intolerant to VPD inquiries, an ALUA deadlock fix and a mpt3sas buffer overrun fix" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: Do not attach VPD to devices that don't support it sd: Fix excessive capacity printing on devices with blocks bigger than 512 bytes scsi_dh_alua: Fix a recently introduced deadlock scsi: Declare local symbols static cxlflash: Move to exponential back-off when cmd_room is not available cxlflash: Fix regression issue with re-ordering patch mpt3sas: Don't overreach ioc->reply_post[] during initialization aacraid: add missing curly braces
-