- 22 Mar, 2022 40 commits
-
-
SeongJae Park authored
Patch series "Docs/damon: Update documents for better consistency". Some of DAMON document are not properly updated for latest version. This patchset updates such parts. This patch (of 3): DAMON code calls the low level monitoring primitives implementations the monitoring operations. The documentation would have no problem at still calling those primitives implementation because there is no real difference in the concepts, but making it more consistent with the code would make it better. This commit therefore convert sentences in the doc specifically pointing the implementations of the primitives to call it monitoring operations. Link: https://lkml.kernel.org/r/20220222170100.17068-1-sj@kernel.org Link: https://lkml.kernel.org/r/20220222170100.17068-2-sj@kernel.orgSigned-off-by:
SeongJae Park <sj@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
tangmeng authored
In mm/Makefile has: obj-$(CONFIG_DAMON) += damon/ So that we don't need 'obj-$(CONFIG_DAMON) :=' in mm/damon/Makefile, delete it from mm/damon/Makefile. Link: https://lkml.kernel.org/r/20220221065255.19991-1-tangmeng@uniontech.comSigned-off-by:
tangmeng <tangmeng@uniontech.com> Cc: SeongJae Park <sj@kernel.org> Signed-off-by:
-
SeongJae Park authored
Because DAMON debugfs interface and DAMON-based proactive reclaim are now using monitoring operations via registration mechanism, damon_{p,v}a_{target_valid,set_operations}() functions have no user. This commit clean them up. Link: https://lkml.kernel.org/r/20220215184603.1479-9-sj@kernel.orgSigned-off-by: -
SeongJae Park authored
DAMON kunit tests for DAMON debugfs interface fails because it still assumes setting empty monitoring operations makes DAMON debugfs interface believe the target of the context don't have pid. This commit fixes the kunit test fails by explicitly setting the context's monitoring operations with the operations for the physical address space, which let debugfs knows the target will not have pid. Link: https://lkml.kernel.org/r/20220215184603.1479-8-sj@kernel.orgSigned-off-by:
-
SeongJae Park authored
DAMON debugfs interface depends on monitoring operations for virtual address spaces because it knows if the target has pid or not by seeing if the context is configured to use one of the virtual address space monitoring operation functions. We can replace that check with 'enum damon_ops_id' now, to make it independent. This commit makes the change. Link: https://lkml.kernel.org/r/20220215184603.1479-7-sj@kernel.orgSigned-off-by:
-
SeongJae Park authored
This commit makes DAMON debugfs interface to select the registered monitoring operations for the physical address space or virtual address spaces depending on user requests instead of setting it on its own. Note that DAMON debugfs interface is still dependent to DAMON_VADDR with this change, because it is also using its symbol, 'damon_va_target_valid'. Link: https://lkml.kernel.org/r/20220215184603.1479-6-sj@kernel.orgSigned-off-by:
-
SeongJae Park authored
This commit makes DAMON_RECLAIM to select the registered monitoring operations for the physical address space instead of setting it on its own. This allows DAMON_RECLAIM be independent of DAMON_PADDR, but leave the dependency as is, because it's the only one monitoring operations it use, and therefore it makes no sense to build DAMON_RECLAIM without DAMON_PADDR. Link: https://lkml.kernel.org/r/20220215184603.1479-5-sj@kernel.orgSigned-off-by:
-
SeongJae Park authored
This commit makes the monitoring operations for the physical address space and virtual address spaces register themselves to DAMON in the subsys_initcall step. Later, in-kernel DAMON user code can use them via damon_select_ops() without have to unnecessarily depend on all possible monitoring operations implementations. Link: https://lkml.kernel.org/r/20220215184603.1479-4-sj@kernel.orgSigned-off-by:
-
SeongJae Park authored
In-kernel DAMON user code like DAMON debugfs interface should set 'struct damon_operations' of its 'struct damon_ctx' on its own. Therefore, the client code should depend on all supporting monitoring operations implementations that it could use. For example, DAMON debugfs interface depends on both vaddr and paddr, while some of the users are not always interested in both. To minimize such unnecessary dependencies, this commit makes the monitoring operations can be registered by implementing code and then dynamically selected by the user code without build-time dependency. Link: https://lkml.kernel.org/r/20220215184603.1479-3-sj@kernel.orgSigned-off-by:
-
SeongJae Park authored
Patch series "Allow DAMON user code independent of monitoring primitives". In-kernel DAMON user code is required to configure the monitoring context (struct damon_ctx) with proper monitoring primitives (struct damon_primitive). This makes the user code dependent to all supporting monitoring primitives. For example, DAMON debugfs interface depends on both DAMON_VADDR and DAMON_PADDR, though some users have interest in only one use case. As more monitoring primitives are introduced, the problem will be bigger. To minimize such unnecessary dependency, this patchset makes monitoring primitives can be registered by the implemnting code and later dynamically searched and selected by the user code. In addition to that, this patchset renames monitoring primitives to monitoring operations, which is more easy to intuitively understand what it means and how it would be structed. This patch (of 8): DAMON has a set of callback functions called monitoring primitives and let it can be configured with various implementations for easy extension for different address spaces and usages. However, the word 'primitive' is not so explicit. Meanwhile, many other structs resembles similar purpose calls themselves 'operations'. To make the code easier to be understood, this commit renames 'damon_primitives' to 'damon_operations' before it is too late to rename. Link: https://lkml.kernel.org/r/20220215184603.1479-1-sj@kernel.org Link: https://lkml.kernel.org/r/20220215184603.1479-2-sj@kernel.orgSigned-off-by:
-
Baolin Wang authored
It will never get a NULL page by pte_page() as discussed in thread [1], thus remove the redundant page validation to fix below Smatch static checker warning. mm/damon/vaddr.c:405 damon_hugetlb_mkold() warn: 'page' can't be NULL. [1] https://lore.kernel.org/linux-mm/20220106091200.GA14564@kili/ Link: https://lkml.kernel.org/r/6d32f7d201b8970d53f51b6c5717d472aed2987c.1642386715.git.baolin.wang@linux.alibaba.comSigned-off-by:Baolin Wang <baolin.wang@linux.alibaba.com> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
David Rientjes <rientjes@google.com> Acked-by:
Souptick Joarder <jrdr.linux@gmail.com> Reviewed-by:
Miaohe Lin <linmiaohe@huawei.com> Signed-off-by:
-
SeongJae Park authored
DAMON asks each monitoring target ('struct damon_target') to have one 'unsigned long' integer called 'id', which should be unique among the targets of same monitoring context. Meaning of it is, however, totally up to the monitoring primitives that registered to the monitoring context. For example, the virtual address spaces monitoring primitives treats the id as a 'struct pid' pointer. This makes the code flexible, but ugly, not well-documented, and type-unsafe[1]. Also, identification of each target can be done via its index. For the reason, this commit removes the concept and uses clear type definition. For now, only 'struct pid' pointer is used for the virtual address spaces monitoring. If DAMON is extended in future so that we need to put another identifier field in the struct, we will use a union for such primitives-dependent fields and document which primitives are using which type. [1] https://lore.kernel.org/linux-mm/20211013154535.4aaeaaf9d0182922e405dd1e@linux-foundation.org/ Link: https://lkml.kernel.org/r/20211230100723.2238-5-sj@kernel.orgSigned-off-by: -
SeongJae Park authored
damon_set_targets() function is defined in the core for general use cases, but called from only dbgfs. Also, because the function is for general use cases, dbgfs does additional handling of pid type target id case. To make the situation simpler, this commit moves the function into dbgfs and makes it to do the pid type case handling on its own. Link: https://lkml.kernel.org/r/20211230100723.2238-4-sj@kernel.orgSigned-off-by:
-
SeongJae Park authored
A previous commit made init_regions debugfs file to use target index instead of target id for specifying the target of the init regions. This commit updates the usage document to reflect the change. Link: https://lkml.kernel.org/r/20211230100723.2238-3-sj@kernel.orgSigned-off-by:
-
SeongJae Park authored
Patch series "Remove the type-unclear target id concept". DAMON asks each monitoring target ('struct damon_target') to have one 'unsigned long' integer called 'id', which should be unique among the targets of same monitoring context. Meaning of it is, however, totally up to the monitoring primitives that registered to the monitoring context. For example, the virtual address spaces monitoring primitives treats the id as a 'struct pid' pointer. This makes the code flexible but ugly, not well-documented, and type-unsafe[1]. Also, identification of each target can be done via its index. For the reason, this patchset removes the concept and uses clear type definition. [1] https://lore.kernel.org/linux-mm/20211013154535.4aaeaaf9d0182922e405dd1e@linux-foundation.org/ This patch (of 4): Target id is a 'unsigned long' data, which can be interpreted differently by each monitoring primitives. For example, it means 'struct pid *' for the virtual address spaces monitoring, while it means nothing but an integer to be displayed to debugfs interface users for the physical address space monitoring. It's flexible but makes code ugly and type-unsafe[1]. To be prepared for eventual removal of the concept, this commit removes a use case of the concept in 'init_regions' debugfs file handling. In detail, this commit replaces use of the id with the index of each target in the context's targets list. [1] https://lore.kernel.org/linux-mm/20211013154535.4aaeaaf9d0182922e405dd1e@linux-foundation.org/ Link: https://lkml.kernel.org/r/20211230100723.2238-1-sj@kernel.org Link: https://lkml.kernel.org/r/20211230100723.2238-2-sj@kernel.orgSigned-off-by: -
Miaohe Lin authored
The local variable ret is always 0. Remove it to make code more tight. Link: https://lkml.kernel.org/r/20220125124833.39718-1-linmiaohe@huawei.comSigned-off-by:
Muchun Song <songmuchun@bytedance.com> Signed-off-by:
-
Marco Elver authored
Allow the use of a deferrable timer, which does not force CPU wake-ups when the system is idle. A consequence is that the sample interval becomes very unpredictable, to the point that it is not guaranteed that the KFENCE KUnit test still passes. Nevertheless, on power-constrained systems this may be preferable, so let's give the user the option should they accept the above trade-off. Link: https://lkml.kernel.org/r/20220308141415.3168078-1-elver@google.comSigned-off-by:
Marco Elver <elver@google.com> Reviewed-by:
Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
-
Peng Liu authored
When CONFIG_KFENCE_NUM_OBJECTS is set to a big number, kfence kunit-test-case test_gfpzero will eat up nearly all the CPU's resources and rcu_stall is reported as the following log which is cut from a physical server. rcu: INFO: rcu_sched self-detected stall on CPU rcu: 68-....: (14422 ticks this GP) idle=6ce/1/0x4000000000000002 softirq=592/592 fqs=7500 (t=15004 jiffies g=10677 q=20019) Task dump for CPU 68: task:kunit_try_catch state:R running task stack: 0 pid: 9728 ppid: 2 flags:0x0000020a Call trace: dump_backtrace+0x0/0x1e4 show_stack+0x20/0x2c sched_show_task+0x148/0x170 ... rcu_sched_clock_irq+0x70/0x180 update_process_times+0x68/0xb0 tick_sched_handle+0x38/0x74 ... gic_handle_irq+0x78/0x2c0 el1_irq+0xb8/0x140 kfree+0xd8/0x53c test_alloc+0x264/0x310 [kfence_test] test_gfpzero+0xf4/0x840 [kfence_test] kunit_try_run_case+0x48/0x20c kunit_generic_run_threadfn_adapter+0x28/0x34 kthread+0x108/0x13c ret_from_fork+0x10/0x18 To avoid rcu_stall and unacceptable latency, a schedule point is added to test_gfpzero. Link: https://lkml.kernel.org/r/20220309083753.1561921-4-liupeng256@huawei.comSigned-off-by:
Peng Liu <liupeng256@huawei.com> Reviewed-by:
Brendan Higgins <brendanhiggins@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Wang Kefeng <wangkefeng.wang@huawei.com> Cc: Daniel Latypov <dlatypov@google.com> Cc: David Gow <davidgow@google.com> Signed-off-by:
-
Peng Liu authored
In function kunit_test_timeout, it is declared "300 * MSEC_PER_SEC" represent 5min. However, it is wrong when dealing with arm64 whose default HZ = 250, or some other situations. Use msecs_to_jiffies to fix this, and kunit_test_timeout will work as desired. Link: https://lkml.kernel.org/r/20220309083753.1561921-3-liupeng256@huawei.com Fixes: 5f3e0620 ("kunit: test: add support for test abort") Signed-off-by:
Daniel Latypov <dlatypov@google.com> Reviewed-by:
-
Peng Liu authored
Patch series "kunit: fix a UAF bug and do some optimization", v2. This series is to fix UAF (use after free) when running kfence test case test_gfpzero, which is time costly. This UAF bug can be easily triggered by setting CONFIG_KFENCE_NUM_OBJECTS = 65535. Furthermore, some optimization for kunit tests has been done. This patch (of 3): Kunit will create a new thread to run an actual test case, and the main process will wait for the completion of the actual test thread until overtime. The variable "struct kunit test" has local property in function kunit_try_catch_run, and will be used in the test case thread. Task kunit_try_catch_run will free "struct kunit test" when kunit runs overtime, but the actual test case is still run and an UAF bug will be triggered. The above problem has been both observed in a physical machine and qemu platform when running kfence kunit tests. The problem can be triggered when setting CONFIG_KFENCE_NUM_OBJECTS = 65535. Under this setting, the test case test_gfpzero will cost hours and kunit will run to overtime. The follows show the panic log. BUG: unable to handle page fault for address: ffffffff82d882e9 Call Trace: kunit_log_append+0x58/0xd0 ... test_alloc.constprop.0.cold+0x6b/0x8a [kfence_test] test_gfpzero.cold+0x61/0x8ab [kfence_test] kunit_try_run_case+0x4c/0x70 kunit_generic_run_threadfn_adapter+0x11/0x20 kthread+0x166/0x190 ret_from_fork+0x22/0x30 Kernel panic - not syncing: Fatal exception Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 To solve this problem, the test case thread should be stopped when the kunit frame runs overtime. The stop signal will send in function kunit_try_catch_run, and test_gfpzero will handle it. Link: https://lkml.kernel.org/r/20220309083753.1561921-1-liupeng256@huawei.com Link: https://lkml.kernel.org/r/20220309083753.1561921-2-liupeng256@huawei.comSigned-off-by:
-
Tianchen Ding authored
Allow enabling KFENCE after system startup by allocating its pool via the page allocator. This provides the flexibility to enable KFENCE even if it wasn't enabled at boot time. Link: https://lkml.kernel.org/r/20220307074516.6920-3-dtcccc@linux.alibaba.comSigned-off-by:
Tianchen Ding <dtcccc@linux.alibaba.com> Reviewed-by:
-
Tianchen Ding authored
Patch series "provide the flexibility to enable KFENCE", v3. If CONFIG_CONTIG_ALLOC is not supported, we fallback to try alloc_pages_exact(). Allocating pages in this way has limits about MAX_ORDER (default 11). So we will not support allocating kfence pool after system startup with a large KFENCE_NUM_OBJECTS. When handling failures in kfence_init_pool_late(), we pair free_pages_exact() to alloc_pages_exact() for compatibility consideration, though it actually does the same as free_contig_range(). This patch (of 2): If once KFENCE is disabled by: echo 0 > /sys/module/kfence/parameters/sample_interval KFENCE could never be re-enabled until next rebooting. Allow re-enabling it by writing a positive num to sample_interval. Link: https://lkml.kernel.org/r/20220307074516.6920-1-dtcccc@linux.alibaba.com Link: https://lkml.kernel.org/r/20220307074516.6920-2-dtcccc@linux.alibaba.comSigned-off-by:
-
tangmeng authored
In mm/Makefile has: obj-$(CONFIG_KFENCE) += kfence/ So that we don't need 'obj-$(CONFIG_KFENCE) :=' in mm/kfence/Makefile, delete it from mm/kfence/Makefile. Link: https://lkml.kernel.org/r/20220221065525.21344-1-tangmeng@uniontech.comSigned-off-by:
-
Dr. David Alan Gilbert authored
Use strtobool rather than open coding "on" and "off" parsing. Link: https://lkml.kernel.org/r/20220227181038.126926-1-linux@treblig.orgSigned-off-by:
Dr. David Alan Gilbert <linux@treblig.org> Signed-off-by:
-
Miaohe Lin authored
Remove unnecessary done label to simplify the code. Link: https://lkml.kernel.org/r/20220126092542.64659-1-linmiaohe@huawei.comSigned-off-by:
David Hildenbrand <david@redhat.com> Acked-by:
-
Ira Weiny authored
Some users of kmap() add an offset to the kmap() address to be used during the mapping. When converting to kmap_local_page() the base address does not need to be stored because any address within the page can be used in kunmap_local(). However, this was not clear from the documentation and cause some questions.[1] Document that any address in the page can be used in kunmap_local() to clarify this for future users. [1] https://lore.kernel.org/lkml/20211213154543.GM3538886@iweiny-DESK2.sc.intel.com/ [ira.weiny@intel.com: updates per Christoph] Link: https://lkml.kernel.org/r/20220124182138.816693-1-ira.weiny@intel.com Link: https://lkml.kernel.org/r/20220124013045.806718-1-ira.weiny@intel.comSigned-off-by:
Ira Weiny <ira.weiny@intel.com> Signed-off-by:
-
Vlastimil Babka authored
The mm/ directory can almost fully be built with W=1, which would help in local development. One remaining issue is missing prototype for early_memremap_pgprot_adjust(). Thus add a declaration for this function. Use mm/internal.h instead of asm/early_ioremap.h to avoid missing type definitions and unnecessary exposure. Link: https://lkml.kernel.org/r/20220314165724.16071-2-vbabka@suse.czSigned-off-by:
Vlastimil Babka <vbabka@suse.cz> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Matthew Wilcox <willy@infradead.org> Cc: David Hildenbrand <david@redhat.com> Signed-off-by:
-
Randy Dunlap authored
__setup() handlers should return 1 if the command line option is handled and 0 if not (or maybe never return 0; it just pollutes init's environment). This prevents: Unknown kernel command line parameters \ "BOOT_IMAGE=/boot/bzImage-517rc5 hardened_usercopy=off", will be \ passed to user space. Run /sbin/init as init process with arguments: /sbin/init with environment: HOME=/ TERM=linux BOOT_IMAGE=/boot/bzImage-517rc5 hardened_usercopy=off or hardened_usercopy=on but when "hardened_usercopy=foo" is used, there is no Unknown kernel command line parameter. Return 1 to indicate that the boot option has been handled. Print a warning if strtobool() returns an error on the option string, but do not mark this as in unknown command line option and do not cause init's environment to be polluted with this string. Link: https://lkml.kernel.org/r/20220222034249.14795-1-rdunlap@infradead.org Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru Fixes: b5cb15d9 ("usercopy: Allow boot cmdline disabling of hardening") Signed-off-by:Randy Dunlap <rdunlap@infradead.org> Reported-by:
Igor Zhbanov <i.zhbanov@omprussia.ru> Acked-by:
Chris von Recklinghausen <crecklin@redhat.com> Cc: Kees Cook <keescook@chromium.org> Signed-off-by:
-
Christophe Leroy authored
While building a small config with CONFIG_CC_OPTIMISE_FOR_SIZE, I ended up with more than 50 times the following function in vmlinux because GCC doesn't honor the 'inline' keyword: c00243bc <copy_overflow>: c00243bc: 94 21 ff f0 stwu r1,-16(r1) c00243c0: 7c 85 23 78 mr r5,r4 c00243c4: 7c 64 1b 78 mr r4,r3 c00243c8: 3c 60 c0 62 lis r3,-16286 c00243cc: 7c 08 02 a6 mflr r0 c00243d0: 38 63 5e e5 addi r3,r3,24293 c00243d4: 90 01 00 14 stw r0,20(r1) c00243d8: 4b ff 82 45 bl c001c61c <__warn_printk> c00243dc: 0f e0 00 00 twui r0,0 c00243e0: 80 01 00 14 lwz r0,20(r1) c00243e4: 38 21 00 10 addi r1,r1,16 c00243e8: 7c 08 03 a6 mtlr r0 c00243ec: 4e 80 00 20 blr With -Winline, GCC tells: /include/linux/thread_info.h:212:20: warning: inlining failed in call to 'copy_overflow': call is unlikely and code size would grow [-Winline] copy_overflow() is a non conditional warning called by check_copy_size() on an error path. check_copy_size() have to remain inlined in order to benefit from constant folding, but copy_overflow() is not worth inlining. Uninline the warning when CONFIG_BUG is selected. When CONFIG_BUG is not selected, WARN() does nothing so skip it. This reduces the size of vmlinux by almost 4kbytes. Link: https://lkml.kernel.org/r/e1723b9cfa924bcefcd41f69d0025b38e4c9364e.1644819985.git.christophe.leroy@csgroup.euSigned-off-by:
Christophe Leroy <christophe.leroy@csgroup.eu> Cc: David Laight <David.Laight@ACULAB.COM> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Signed-off-by:
-
Christophe Leroy authored
Users of usercopy_warn() were removed by commit 53944f17 ("mm: remove HARDENED_USERCOPY_FALLBACK") Remove it. Link: https://lkml.kernel.org/r/5f26643fc70b05f8455b60b99c30c17d635fa640.1644231910.git.christophe.leroy@csgroup.euSigned-off-by:
Stephen Kitt <steve@sk2.org> Reviewed-by:
-
Maciej S. Szmigiero authored
Zswap has an ability to efficiently store same-value filled pages, which can be turned on and off using the "same_filled_pages_enabled" parameter. However, there is currently no way to enable just this (lightweight) functionality, while not making use of the whole compressed page storage machinery. Add a "non_same_filled_pages_enabled" parameter which allows disabling handling of pages that aren't same-value filled. This way zswap can be run in such lightweight same-value filled pages only mode. Link: https://lkml.kernel.org/r/7dbafa963e8bab43608189abbe2067f4b9287831.1641247624.git.maciej.szmigiero@oracle.comSigned-off-by:
Maciej S. Szmigiero <maciej.szmigiero@oracle.com> Cc: Seth Jennings <sjenning@redhat.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Vitaly Wool <vitaly.wool@konsulko.com> Signed-off-by:
-
Hugh Dickins authored
PageDoubleMap is maintained differently for anon and for shmem+file: the shmem+file one was never cleared, because a safe place to do so could not be found; so it would blight future use of the cached hugepage until evicted. See https://lore.kernel.org/lkml/1571938066-29031-1-git-send-email-yang.shi@linux.alibaba.com/ But page_add_file_rmap() does provide a safe place to do so (though later than one might wish): allowing testing to return to an initial state without a damaging drop_caches. Link: https://lkml.kernel.org/r/61c5cf99-a962-9a25-597a-53ab1bd8fbc0@google.com Fixes: 9a73f61b ("thp, mlock: do not mlock PTE-mapped file huge pages") Signed-off-by:
Hugh Dickins <hughd@google.com> Reviewed-by:
Yang Shi <shy828301@gmail.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Signed-off-by:
-
Oscar Salvador authored
Abhishek reported that after patch [1], hotplug operations are taking roughly double the expected time. [2] The reason behind is that the CPU callbacks that migrate_on_reclaim_init() sets always call set_migration_target_nodes() whenever a CPU is brought up/down. But we only care about numa nodes going from having cpus to become cpuless, and vice versa, as that influences the demotion_target order. We do already have two CPU callbacks (vmstat_cpu_online() and vmstat_cpu_dead()) that check exactly that, so get rid of the CPU callbacks in migrate_on_reclaim_init() and only call set_migration_target_nodes() from vmstat_cpu_{dead,online}() whenever a numa node change its N_CPU state. [1] https://lore.kernel.org/linux-mm/20210721063926.3024591-2-ying.huang@intel.com/ [2] https://lore.kernel.org/linux-mm/eb438ddd-2919-73d4-bd9f-b7eecdd9577a@linux.vnet.ibm.com/ [osalvador@suse.de: add feedback from Huang Ying] Link: https://lkml.kernel.org/r/20220314150945.12694-1-osalvador@suse.de Link: https://lkml.kernel.org/r/20220310120749.23077-1-osalvador@suse.de Fixes: 884a6e5d ("mm/migrate: update node demotion order on hotplug events") Signed-off-by:Oscar Salvador <osalvador@suse.de> Reviewed-by:
Abhishek Goel <huntbag@linux.vnet.ibm.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Abhishek Goel <huntbag@linux.vnet.ibm.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
David Hildenbrand authored
Let's make it clearer at which places we actually add and remove memory blocks -- streamlining the terminology -- and highlight which memory block start out online and which start out as offline. * rename add_memory_block -> add_boot_memory_block * rename init_memory_block -> add_memory_block * rename unregister_memory -> remove_memory_block * rename register_memory -> __add_memory_block * add add_hotplug_memory_block * mark add_boot_memory_block with __init (suggested by Oscar) __add_memory_block() is a pure helper for add_memory_block(), remove the somewhat obvious comment. Link: https://lkml.kernel.org/r/20220221154531.11382-1-david@redhat.comSigned-off-by:
-
David Hildenbrand authored
test_pages_in_a_zone() is just another nasty PFN walker that can easily stumble over ZONE_DEVICE memory ranges falling into the same memory block as ordinary system RAM: the memmap of parts of these ranges might possibly be uninitialized. In fact, we observed (on an older kernel) with UBSAN: UBSAN: Undefined behaviour in ./include/linux/mm.h:1133:50 index 7 is out of range for type 'zone [5]' CPU: 121 PID: 35603 Comm: read_all Kdump: loaded Tainted: [...] Hardware name: Dell Inc. PowerEdge R7425/08V001, BIOS 1.12.2 11/15/2019 Call Trace: dump_stack+0x9a/0xf0 ubsan_epilogue+0x9/0x7a __ubsan_handle_out_of_bounds+0x13a/0x181 test_pages_in_a_zone+0x3c4/0x500 show_valid_zones+0x1fa/0x380 dev_attr_show+0x43/0xb0 sysfs_kf_seq_show+0x1c5/0x440 seq_read+0x49d/0x1190 vfs_read+0xff/0x300 ksys_read+0xb8/0x170 do_syscall_64+0xa5/0x4b0 entry_SYSCALL_64_after_hwframe+0x6a/0xdf RIP: 0033:0x7f01f4439b52 We seem to stumble over a memmap that contains a garbage zone id. While we could try inserting pfn_to_online_page() calls, it will just make memory offlining slower, because we use test_pages_in_a_zone() to make sure we're offlining pages that all belong to the same zone. Let's just get rid of this PFN walker and determine the single zone of a memory block -- if any -- for early memory blocks during boot. For memory onlining, we know the single zone already. Let's avoid any additional memmap scanning and just rely on the zone information available during boot. For memory hot(un)plug, we only really care about memory blocks that: * span a single zone (and, thereby, a single node) * are completely System RAM (IOW, no holes, no ZONE_DEVICE) If one of these conditions is not met, we reject memory offlining. Hotplugged memory blocks (starting out offline), always meet both conditions. There are three scenarios to handle: (1) Memory hot(un)plug A memory block with zone == NULL cannot be offlined, corresponding to our previous test_pages_in_a_zone() check. After successful memory onlining/offlining, we simply set the zone accordingly. * Memory onlining: set the zone we just used for onlining * Memory offlining: set zone = NULL So a hotplugged memory block starts with zone = NULL. Once memory onlining is done, we set the proper zone. (2) Boot memory with !CONFIG_NUMA We know that there is just a single pgdat, so we simply scan all zones of that pgdat for an intersection with our memory block PFN range when adding the memory block. If more than one zone intersects (e.g., DMA and DMA32 on x86 for the first memory block) we set zone = NULL and consequently mimic what test_pages_in_a_zone() used to do. (3) Boot memory with CONFIG_NUMA At the point in time we create the memory block devices during boot, we don't know yet which nodes *actually* span a memory block. While we could scan all zones of all nodes for intersections, overlapping nodes complicate the situation and scanning all nodes is possibly expensive. But that problem has already been solved by the code that sets the node of a memory block and creates the link in the sysfs -- do_register_memory_block_under_node(). So, we hook into the code that sets the node id for a memory block. If we already have a different node id set for the memory block, we know that multiple nodes *actually* have PFNs falling into our memory block: we set zone = NULL and consequently mimic what test_pages_in_a_zone() used to do. If there is no node id set, we do the same as (2) for the given node. Note that the call order in driver_init() is: -> memory_dev_init(): create memory block devices -> node_dev_init(): link memory block devices to the node and set the node id So in summary, we detect if there is a single zone responsible for this memory block and we consequently store the zone in that case in the memory block, updating it during memory onlining/offlining. Link: https://lkml.kernel.org/r/20220210184359.235565-3-david@redhat.comSigned-off-by:
Rafael Parra <rparrazo@redhat.com> Reviewed-by:
-
David Hildenbrand authored
Patch series "drivers/base/memory: determine and store zone for single-zone memory blocks", v2. I remember talking to Michal in the past about removing test_pages_in_a_zone(), which we use for: * verifying that a memory block we intend to offline is really only managed by a single zone. We don't support offlining of memory blocks that are managed by multiple zones (e.g., multiple nodes, DMA and DMA32) * exposing that zone to user space via /sys/devices/system/memory/memory*/valid_zones Now that I identified some more cases where test_pages_in_a_zone() might go wrong, and we received an UBSAN report (see patch #3), let's get rid of this PFN walker. So instead of detecting the zone at runtime with test_pages_in_a_zone() by scanning the memmap, let's determine and remember for each memory block if it's managed by a single zone. The stored zone can then be used for the above two cases, avoiding a manual lookup using test_pages_in_a_zone(). This avoids eventually stumbling over uninitialized memmaps in corner cases, especially when ZONE_DEVICE ranges partly fall into memory block (that are responsible for managing System RAM). Handling memory onlining is easy, because we online to exactly one zone. Handling boot memory is more tricky, because we want to avoid scanning all zones of all nodes to detect possible zones that overlap with the physical memory region of interest. Fortunately, we already have code that determines the applicable nodes for a memory block, to create sysfs links -- we'll hook into that. Patch #1 is a simple cleanup I had laying around for a longer time. Patch #2 contains the main logic to remove test_pages_in_a_zone() and further details. [1] https://lkml.kernel.org/r/20220128144540.153902-1-david@redhat.com [2] https://lkml.kernel.org/r/20220203105212.30385-1-david@redhat.com This patch (of 2): Let's adjust the stale terminology, making it match unregister_memory_block_under_nodes() and do_register_memory_block_under_node(). We're dealing with memory block devices, which span 1..X memory sections. Link: https://lkml.kernel.org/r/20220210184359.235565-1-david@redhat.com Link: https://lkml.kernel.org/r/20220210184359.235565-2-david@redhat.comSigned-off-by:
-
Miaohe Lin authored
It's misplaced since commit 79605093 ("mm, memory_hotplug: print reason for the offlining failure"). Move it to the right place. Link: https://lkml.kernel.org/r/20220207133643.23427-5-linmiaohe@huawei.comSigned-off-by:
-
Miaohe Lin authored
We can use helper macro node_spanned_pages to check whether node spans pages. And we can change the parameter of check_cpu_on_node to nid as that's what it really cares. Thus we can further get rid of the local variable pgdat and improve the readability a bit. Link: https://lkml.kernel.org/r/20220207133643.23427-4-linmiaohe@huawei.comSigned-off-by:
-
Miaohe Lin authored
If zid reaches ZONE_NORMAL, the caller will always get the NORMAL zone no matter what zone_intersects() returns. So we can save some possible cpu cycles by avoid calling zone_intersects() for ZONE_NORMAL. Link: https://lkml.kernel.org/r/20220207133643.23427-3-linmiaohe@huawei.comSigned-off-by:
-
Miaohe Lin authored
Patch series "A few cleanup patches around memory_hotplug". This series contains a few patches to fix obsolete and misplaced comments, clean up the try_offline_node function and so on. This patch (of 4): Since commit f1dd2cd1 ("mm, memory_hotplug: do not associate hotadded memory to zones until online"), there is no need to pass in the zone. [akpm@linux-foundation.org: remove the comment altogether, per David] Link: https://lkml.kernel.org/r/20220207133643.23427-1-linmiaohe@huawei.com Link: https://lkml.kernel.org/r/20220207133643.23427-2-linmiaohe@huawei.comSigned-off-by:
-
