- 21 Oct, 2014 16 commits
-
-
Max Filippov authored
Memory accounting code can't handle pages below PLATFORM_DEFAULT_MEM_START. Reserve those pages if they exist. When PLATFORM_DEFAULT_MEM_START is zero reserve one page at address 0 to make sure that successfull memory allocations don't return NULL. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
-
Max Filippov authored
initialize_mmu sets up atomctl SR which is needed for s32c1i to function correctly even in noMMU configurations. It's also a good place to set up caching attributes of physical memory. Allow enabling INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX in noMMU configurations for setting up atomctl and cache attributes. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
-
Max Filippov authored
Instead of initializing vecbase in initialize_mmu macro, which may be expanded either in Image.elf reset vector hadler or in the kernel head.S, both times only when CONFIG_MMU is enabled, do this initialization once in _startup function. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
-
Max Filippov authored
Use the same offset from the default physical memory start address as in LOAD_MEMORY_ADDRESS definition. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
-
Max Filippov authored
Change KERNELOFFSET, LOAD_MEMORY_ADDRESS and VIRTUAL_MEMORY_ADDRESS to be relative to the start of physical memory in noMMU configuration, as there's no uniform memory remapping to KSEG starting at 0xd0000000. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
-
Max Filippov authored
Don't hardcode kernel entry address as 0x3000 or 0xd0003000, use LOAD_MEMORY_ADDRESS macro. Don't compile MMU remapping code and don't try to link it when building noMMU configuration. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
-
Max Filippov authored
TLB sanity checking code depends on full MMU presence and may not be built in noMMU confgiuration. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
-
Max Filippov authored
Most cache flushing code is only relevant for MMU. Don't build it for nommu configuration. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
-
Max Filippov authored
Nommu unconditionally provides arch_get_unmapped_area that always returns -ENOMEM. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
-
Max Filippov authored
Add MAP_UNINITIALIZED to xtensa version of mman.h to keep mm/nommu.c happy. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
-
Max Filippov authored
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
-
Max Filippov authored
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
-
Max Filippov authored
mmu_context.h is not used in nommu configuration, nommu_context.h is used instead. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
-
Max Filippov authored
This config allows running SMP-enabled bitstream on LX200 board. NFS or FLASH rootfs, minimal debug, up to 4 cores. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
-
Max Filippov authored
This config enables most important features, NFS or FLASH rootfs and minimal debug. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
-
Max Filippov authored
Userspace actually passes single parameter (path name) to the umount syscall, so new umount just fails. Fix it by requesting old umount syscall implementation and re-wiring umount to it. Cc: stable@vger.kernel.org Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
-
- 05 Oct, 2014 6 commits
-
-
Max Filippov authored
Otherwise we get the following build warning: (XTENSA_PLATFORM_XTFPGA) selects ETHOC which has unmet direct dependencies (NETDEVICES && ETHERNET && HAS_IOMEM && HAS_DMA) Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
-
Max Filippov authored
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
-
Max Filippov authored
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
-
Max Filippov authored
The default pgprot_noncached doesn't do anything. This leads to issues when drivers rely on it to disable caching in userspace mappings. Implement pgprot_noncached properly so that caching of userspace mappings could be controlled. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "This is a set of two small fixes, both to code which went in during the merge window: cxgb4i has a scheduling in atomic bug in its new ipv6 code and uas fails to work properly with the new scsi-mq code" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: [SCSI] uas: disable use of blk-mq I/O path [SCSI] cxgb4i: avoid holding mutex in interrupt context
-
- 04 Oct, 2014 1 commit
-
-
https://git.kernel.org/pub/scm/linux/kernel/git/josh/linuxLinus Torvalds authored
Pull kconfig fixes for tiny setups from Josh Triplett: "Two Kconfig bugfixes for 3.17 related to tinification. These fixes make the Kconfig "General Setup" menu much more usable" * tag 'tiny/kconfig-for-3.17' of https://git.kernel.org/pub/scm/linux/kernel/git/josh/linux: init/Kconfig: Fix HAVE_FUTEX_CMPXCHG to not break up the EXPERT menu init/Kconfig: Hide printk log config if CONFIG_PRINTK=n
-
- 03 Oct, 2014 13 commits
-
-
Josh Triplett authored
commit 03b8c7b6 ("futex: Allow architectures to skip futex_atomic_cmpxchg_inatomic() test") added the HAVE_FUTEX_CMPXCHG symbol right below FUTEX. This placed it right in the middle of the options for the EXPERT menu. However, HAVE_FUTEX_CMPXCHG does not depend on EXPERT or FUTEX, so Kconfig stops placing items in the EXPERT menu, and displays the remaining several EXPERT items (starting with EPOLL) directly in the General Setup menu. Since both users of HAVE_FUTEX_CMPXCHG only select it "if FUTEX", make HAVE_FUTEX_CMPXCHG itself depend on FUTEX. With this change, the subsequent items display as part of the EXPERT menu again; the EMBEDDED menu now appears as the next top-level item in the General Setup menu, which makes General Setup much shorter and more usable. Signed-off-by: Josh Triplett <josh@joshtriplett.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Cc: stable <stable@vger.kernel.org>
-
Josh Triplett authored
The buffers sized by CONFIG_LOG_BUF_SHIFT and CONFIG_LOG_CPU_MAX_BUF_SHIFT do not exist if CONFIG_PRINTK=n, so don't ask about their size at all. Signed-off-by: Josh Triplett <josh@joshtriplett.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Cc: stable <stable@vger.kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: "Two i2c driver bugfixes" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: qup: Fix order of runtime pm initialization i2c: rk3x: fix 0 length write transfers
-
Linus Torvalds authored
Merge tag 'trace-fixes-v3.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull trace ring buffer iterator fix from Steven Rostedt: "While testing some new changes for 3.18, I kept hitting a bug every so often in the ring buffer. At first I thought it had to do with some of the changes I was working on, but then testing something else I realized that the bug was in 3.17 itself. I ran several bisects as the bug was not very reproducible, and finally came up with the commit that I could reproduce easily within a few minutes, and without the change I could run the tests over an hour without issue. The change fit the bug and I figured out a fix. That bad commit was: Commit 651e22f2 "ring-buffer: Always reset iterator to reader page" This commit fixed a bug, but in the process created another one. It used the wrong value as the cached value that is used to see if things changed while an iterator was in use. This made it look like a change always happened, and could cause the iterator to go into an infinite loop" * tag 'trace-fixes-v3.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ring-buffer: Fix infinite spin in reading buffer
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs/smb3 fixes from Steve French: "Fix for CIFS/SMB3 oops on reconnect during readpages (3.17 regression) and for incorrectly closing file handle in symlink error cases" * 'for-linus' of git://git.samba.org/sfrench/cifs-2.6: CIFS: Fix readpages retrying on reconnects Fix problem recognizing symlinks
-
git://neil.brown.name/mdLinus Torvalds authored
Pull raid5 discard fix from Neil Brown: "One fix for raid5 discard issue" * tag 'md/3.17-final-fix' of git://neil.brown.name/md: md/raid5: disable 'DISCARD' by default due to safety concerns.
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Nothing too major or scary. One i915 regression fix, nouveau has a tmds regression fix, along with a regression fix for the runtime pm code for optimus laptops not restoring the display hw correctly" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/nouveau: make sure display hardware is reinitialised on runtime resume drm/nouveau: punt fbcon resume out to a workqueue drm/nouveau: fix regression on original nv50 board drm/nv50/disp: fix dpms regression on certain boards drm/i915: Flush the PTEs after updating them before suspend
-
Christoph Hellwig authored
The uas driver uses the block layer tag for USB3 stream IDs. With blk-mq we can get larger tag numbers that the queue depth, which breaks this assumption. A fix is under way for 3.18, but sits on top of large changes so can't easily be backported. Set the disable_blk_mq path so that a uas device can't easily crash the system when using blk-mq for SCSI. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull ACPI and power management fixes from Rafael Wysocki: "These are three regression fixes (cpufreq core, pcc-cpufreq, i915 / ACPI) and one trivial fix for a callback return value mismatch in the cpufreq integrator driver. Specifics: - A recent cpufreq core fix went too far and introduced a regression in the system suspend code path. Fix from Viresh Kumar. - An ACPI-related commit in the i915 driver that fixed backlight problems for some Thinkpads inadvertently broke a Dell machine (in 3.16). Fix from Aaron Lu. - The pcc-cpufreq driver was broken during the 3.15 cycle by a commit that put wait_event() under a spinlock by mistake. Fix that (Rafael J Wysocki). - The return value type of integrator_cpufreq_remove() is void, but should be int. Fix from Arnd Bergmann" * tag 'pm+acpi-3.17-final' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: update 'cpufreq_suspended' after stopping governors ACPI / i915: Update the condition to ignore firmware backlight change request cpufreq: integrator: fix integrator_cpufreq_remove return type cpufreq: pcc-cpufreq: Fix wait_event() under spinlock
-
git://anongit.freedesktop.org/drm-intelDave Airlie authored
final regression fix for 3.17. * tag 'drm-intel-fixes-2014-10-02' of git://anongit.freedesktop.org/drm-intel: drm/i915: Flush the PTEs after updating them before suspend
-
Andy Gross authored
The runtime pm calls need to be done before populating the children via the i2c_add_adapter call. If this is not done, a child can run into issues trying to do i2c read/writes due to the pm_runtime_sync failing. Signed-off-by: Andy Gross <agross@codeaurora.org> Reviewed-by: Felipe Balbi <balbi@ti.com> Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
-
Alexandru M Stan authored
i2cdetect -q was broken (everything was a false positive, and no transfers were actually being sent over i2c). The way it works is by sending a 0 length write request and checking for NACK. This patch fixes the 0 length writes and actually sends them. Reported-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Alexandru M Stan <amstan@chromium.org> Tested-by: Doug Anderson <dianders@chromium.org> Tested-by: Max Schwarz <max.schwarz@online.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
-
Rafael J. Wysocki authored
* pm-cpufreq: cpufreq: update 'cpufreq_suspended' after stopping governors cpufreq: integrator: fix integrator_cpufreq_remove return type cpufreq: pcc-cpufreq: Fix wait_event() under spinlock * acpi-video: ACPI / i915: Update the condition to ignore firmware backlight change request
-
- 02 Oct, 2014 4 commits
-
-
Linus Torvalds authored
Merge fixes from Andrew Morton: "5 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm: page_alloc: fix zone allocation fairness on UP perf: fix perf bug in fork() MAINTAINERS: change git URL for mpc5xxx tree mm: memcontrol: do not iterate uninitialized memcgs ocfs2/dlm: should put mle when goto kill in dlm_assert_master_handler
-
Johannes Weiner authored
The zone allocation batches can easily underflow due to higher-order allocations or spills to remote nodes. On SMP that's fine, because underflows are expected from concurrency and dealt with by returning 0. But on UP, zone_page_state will just return a wrapped unsigned long, which will get past the <= 0 check and then consider the zone eligible until its watermarks are hit. Commit 3a025760 ("mm: page_alloc: spill to remote nodes before waking kswapd") already made the counter-resetting use atomic_long_read() to accomodate underflows from remote spills, but it didn't go all the way with it. Make it clear that these batches are expected to go negative regardless of concurrency, and use atomic_long_read() everywhere. Fixes: 81c0a2bb ("mm: page_alloc: fair zone allocator policy") Reported-by: Vlastimil Babka <vbabka@suse.cz> Reported-by: Leon Romanovsky <leon@leon.nu> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: <stable@vger.kernel.org> [3.12+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Peter Zijlstra authored
Oleg noticed that a cleanup by Sylvain actually uncovered a bug; by calling perf_event_free_task() when failing sched_fork() we will not yet have done the memset() on ->perf_event_ctxp[] and will therefore try and 'free' the inherited contexts, which are still in use by the parent process. This is bad.. Suggested-by: Oleg Nesterov <oleg@redhat.com> Reported-by: Oleg Nesterov <oleg@redhat.com> Reported-by: Sylvain 'ythier' Hitier <sylvain.hitier@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Anatolij Gustschin authored
The repository for mpc5xxx has been moved, update git URL to new location. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-