Skip to content

L
linux
Switch branch/tag
  1. 06 Jun, 2012 8 commits
    • Oleg Nesterov's avatar
      uprobes: Teach handle_swbp() to rely on "is_swbp" rather than uprobes_srcu · 56bb4cf6
      Oleg Nesterov authored 
      Currently handle_swbp() assumes that it can't race with
unregister, so it roughly does:

	if (find_uprobe(vaddr))
		process_uprobe();
	else
		send_sig(SIGTRAP);

This relies on the not-really-working uprobes_srcu code we are
going to remove, see the next patch.

With this patch we rely on the result of
is_swbp_at_addr(bp_vaddr) if find_uprobe() fails.

If is_swbp == 1, then we hit the normal int3, we should send
SIGTRAP.

If is_swbp == 0, we raced with uprobe_unregister(), we simply
restart this insn again.

The "difficult" case is is_swbp == -EFAULT, when we can't read
this memory. In this case I think we should restart too, and
this is more correct compared to the current code which sends
SIGTRAP.

Ignoring ENOMEM/etc from get_user_pages(), this can only happen
if another thread unmaps this memory before find_active_uprobe()
takes mmap_sem. It would be better to pretend it was unmapped
before this insn was executed, restart, and get SIGSEGV.
Signed-off-by: default avatarOleg Nesterov <oleg@redhat.com>
Acked-by: default avatarSrikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anton Arapov <anton@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120529192947.GF8057@redhat.comSigned-off-by: default avatarIngo Molnar <mingo@kernel.org>
      56bb4cf6
    • Oleg Nesterov's avatar
      uprobes: Change register_for_each_vma() to take mm->mmap_sem for writing · 77fc4af1
      Oleg Nesterov authored 
      Change register_for_each_vma() to take mm->mmap_sem for writing.
This is a bit unfortunate but hopefully not too bad, this is the
slow path anyway.

This is needed to ensure that find_active_uprobe() can not race
with uprobe_register() which adds the new bp at the same
bp_vaddr, after find_uprobe() fails and before
is_swbp_at_addr_fast() checks the memory.

IOW, this is needed to ensure that if find_active_uprobe()
returns NULL but is_swbp == true, we can safely assume that it
was the "normal" int3 and we should send SIGTRAP.

There is another reason for this change. We are going to replace
uprobes_state->count with MMF_ flags set by register/unregister
and cleared by find_active_uprobe(), and set/clear shouldn't
race with each other.
Signed-off-by: default avatarOleg Nesterov <oleg@redhat.com>
Acked-by: default avatarSrikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anton Arapov <anton@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120529192928.GE8057@redhat.comSigned-off-by: default avatarIngo Molnar <mingo@kernel.org>
      77fc4af1
    • Oleg Nesterov's avatar
      uprobes: Teach find_active_uprobe() to provide the "is_swbp" info · d790d346
      Oleg Nesterov authored 
      A separate patch to simplify the review, and for the
documentation.

The patch adds another "int *is_swbp" argument to
find_active_uprobe(), so far its only caller doesn't use this
info.

With this patch find_active_uprobe() additionally does:

	- if find_vma() + ->vm_start check fails, *is_swbp = -EFAULT

	- otherwise, if valid_vma() + find_uprobe() fails, it holds
	  the result of is_swbp_at_addr(), can be negative too. The
	  latter is only possible if we raced with another thread
	  which did munmap/etc after we hit this bp.

IOW. If find_active_uprobe(&is_swbp) returns NULL, the caller
can look at is_swbp to figure out whether the current insn is bp
or not, or detect the race with another thread if it is
negative.

Note: I think that performance-wise this change is fine. This
adds is_swbp_at_addr(), but only if we raced with
uprobe_unregister() or if we hit the "normal" int3 but this mm
has uprobes as well. And even in this case the slow
read_opcode() path is very unlikely, this insn recently
triggered do_int3(), __copy_from_user_inatomic() shouldn't fail
in the likely case.
Signed-off-by: default avatarOleg Nesterov <oleg@redhat.com>
Acked-by: default avatarSrikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anton Arapov <anton@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120529192914.GD8057@redhat.comSigned-off-by: default avatarIngo Molnar <mingo@kernel.org>
      d790d346
    • Oleg Nesterov's avatar
      uprobes: Introduce find_active_uprobe() helper · 3a9ea052
      Oleg Nesterov authored 
      No functional changes. Move the "find uprobe" code from
handle_swbp() to the new helper, find_active_uprobe().

Note: with or without this change, the find-active-uprobe logic
is not exactly right. We can race with another thread which
unmaps the memory with the valid uprobe before we take
mm->mmap_sem. We can't find this uprobe simply because
find_vma() fails. In this case we wrongly assume that this trap
was not caused by uprobe and send the erroneous SIGTRAP. See the
next changes.
Signed-off-by: default avatarOleg Nesterov <oleg@redhat.com>
Acked-by: default avatarSrikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anton Arapov <anton@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120529192857.GC8057@redhat.comSigned-off-by: default avatarIngo Molnar <mingo@kernel.org>
      3a9ea052
    • Oleg Nesterov's avatar
      uprobes: Change read_opcode() to use FOLL_FORCE · a3d7bb47
      Oleg Nesterov authored 
      set_orig_insn()->read_opcode() should not fail if the probed
task did mprotect() after uprobe_register(), change it to use
FOLL_FORCE. Without FOLL_WRITE this doesn't have any "side"
effect but allows to read the !VM_READ memory.

There is another reason for this change, we are going to use
is_swbp_at_addr() from handle_swbp() which can race with another
thread doing mprotect().
Signed-off-by: default avatarOleg Nesterov <oleg@redhat.com>
Acked-by: default avatarSrikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anton Arapov <anton@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120529192759.GB8057@redhat.comSigned-off-by: default avatarIngo Molnar <mingo@kernel.org>
      a3d7bb47
    • Oleg Nesterov's avatar
      uprobes: Optimize is_swbp_at_addr() for current->mm · c00b2750
      Oleg Nesterov authored 
      Change is_swbp_at_addr() to try to avoid the costly
read_opcode() if mm == current->mm, __copy_from_user_inatomic()
should succeed in the likely case.

Currently this optimization is not important, but we are going
to add more is_swbp_at_addr(current->mm) callers.
Signed-off-by: default avatarOleg Nesterov <oleg@redhat.com>
Acked-by: default avatarSrikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anton Arapov <anton@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120529192744.GA8057@redhat.comSigned-off-by: default avatarIngo Molnar <mingo@kernel.org>
      c00b2750
    • Masami Hiramatsu's avatar
      x86/decoder: Fix bsr/bsf/jmpe decoding with operand-size prefix · 436d03fa
      Masami Hiramatsu authored 
      Fix the x86 instruction decoder to decode bsr/bsf/jmpe with
operand-size prefix (66h). This fixes the test case failure
reported by Linus, attached below.

bsf/bsr/jmpe have a special encoding. Opcode map in
Intel Software Developers Manual vol2 says they have
TZCNT/LZCNT variants if it has F3h prefix. However, there
is no information if it has other 66h or F2h prefixes.
Current instruction decoder supposes that those are
bad instructions, but it actually accepts at least
operand-size prefixes.

H. Peter Anvin further explains:

 " TZCNT/LZCNT are F3 + BSF/BSR exactly because the F2 and
   F3 prefixes have historically been no-ops with most instructions.
   This allows software to unconditionally use the prefixed versions
   and get TZCNT/LZCNT on the processors that have them if they don't
   care about the difference. "

This fixes errors reported by test_get_len:

  Warning: arch/x86/tools/test_get_len found difference at <em_bsf>:ffffffff81036d87
  Warning: ffffffff81036de5:	66 0f bc c2          	bsf    %dx,%ax
  Warning: objdump says 4 bytes, but insn_get_length() says 3
  Warning: arch/x86/tools/test_get_len found difference at <em_bsr>:ffffffff81036ea6
  Warning: ffffffff81036f04:	66 0f bd c2          	bsr    %dx,%ax
  Warning: objdump says 4 bytes, but insn_get_length() says 3
  Warning: decoded and checked 13298882 instructions with 2 warnings
Reported-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
Reported-by: default avatarPekka Enberg <penberg@kernel.org>
Signed-off-by: default avatarMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <yrl.pp-manager.tt@hitachi.com>
Link: http://lkml.kernel.org/r/20120604150911.22338.43296.stgit@localhost.localdomainSigned-off-by: default avatarIngo Molnar <mingo@kernel.org>
      436d03fa
    • Ingo Molnar's avatar
      Merge tag 'perf-urgent-for-mingo' of... · 02e03040
      Ingo Molnar authored 
      Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent

Pull perf fixes from Arnaldo Carvalho de Melo:

 * Endianness fixes from Jiri Olsa

 * Fixes for make perf tarball

 * Fix for DSO name in perf script callchains, from David Ahern

 * Segfault fixes for perf top --callchain, from Namhyung Kim

 * Minor function result fixes from Srikar Dronamraju

 * Add missing 3rd ioctl parameter, from Namhyung Kim

 * Fix pager usage in minimal embedded systems, from Avik Sil
Signed-off-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: default avatarIngo Molnar <mingo@kernel.org>
      02e03040
  3. 05 Jun, 2012 2 commits
  5. 04 Jun, 2012 12 commits
  7. 03 Jun, 2012 3 commits
    • Linus Torvalds's avatar
      vfs: move inode stat information closer together · 2f9d3df8
      Linus Torvalds authored 
      The comment above it says "Stat data, not accessed from path walking",
but in fact some of inode fields we use for the common stat data was way
down at the end of the inode, causing unnecessary cache misses for the
common stat operations.

The inode structure is pretty big, and this can change padding depending
on field width, but at least on the common 64-bit configurations this
doesn't change the size.  Some of our inode layout has historically been
to tro to avoid unnecessary padding fields, but cache locality is at
least as important for layout, if not more.

Noticed by looking at kernel profiles, and noticing that the "i_blkbits"
access stood out like a sore thumb.
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      2f9d3df8
    • Linus Torvalds's avatar
      Linux 3.5-rc1 · f8f5701b
      Linus Torvalds authored
      f8f5701b
    • Linus Torvalds's avatar
      Merge tag 'dm-3.5-changes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm · 912afc36
      Linus Torvalds authored 
      Pull device-mapper updates from Alasdair G Kergon:
 "Improve multipath's retrying mechanism in some defined circumstances
  and provide a simple reserve/release mechanism for userspace tools to
  access thin provisioning metadata while the pool is in use."

* tag 'dm-3.5-changes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm:
  dm thin: provide userspace access to pool metadata
  dm thin: use slab mempools
  dm mpath: allow ioctls to trigger pg init
  dm mpath: delay retry of bypassed pg
  dm mpath: reduce size of struct multipath
      912afc36
  9. 02 Jun, 2012 15 commits
    • Joe Thornber's avatar
      dm thin: provide userspace access to pool metadata · cc8394d8
      Joe Thornber authored 
      This patch implements two new messages that can be sent to the thin
pool target allowing it to take a snapshot of the _metadata_.  This,
read-only snapshot can be accessed by userland, concurrently with the
live target.

Only one metadata snapshot can be held at a time.  The pool's status
line will give the block location for the current msnap.

Since version 0.1.5 of the userland thin provisioning tools, the
thin_dump program displays the msnap as follows:

    thin_dump -m <msnap root> <metadata dev>

Available here: https://github.com/jthornber/thin-provisioning-tools

Now that userland can access the metadata we can do various things
that have traditionally been kernel side tasks:

     i) Incremental backups.

     By using metadata snapshots we can work out what blocks have
     changed over time.  Combined with data snapshots we can ensure
     the data doesn't change while we back it up.

     A short proof of concept script can be found here:

     https://github.com/jthornber/thinp-test-suite/blob/master/incremental_backup_example.rb

     ii) Migration of thin devices from one pool to another.

     iii) Merging snapshots back into an external origin.

     iv) Asyncronous replication.
Signed-off-by: default avatarJoe Thornber <ejt@redhat.com>
Signed-off-by: default avatarAlasdair G Kergon <agk@redhat.com>
      cc8394d8
    • Mike Snitzer's avatar
      dm thin: use slab mempools · a24c2569
      Mike Snitzer authored 
      Use dedicated caches prefixed with a "dm_" name rather than relying on
kmalloc mempools backed by generic slab caches so the memory usage of
thin provisioning (and any leaks) can be accounted for independently.
Signed-off-by: default avatarMike Snitzer <snitzer@redhat.com>
Signed-off-by: default avatarAlasdair G Kergon <agk@redhat.com>
      a24c2569
    • Mikulas Patocka's avatar
      dm mpath: allow ioctls to trigger pg init · 35991652
      Mikulas Patocka authored 
      After the failure of a group of paths, any alternative paths that
need initialising do not become available until further I/O is sent to
the device.  Until this has happened, ioctls return -EAGAIN.

With this patch, new paths are made available in response to an ioctl
too.  The processing of the ioctl gets delayed until this has happened.

Instead of returning an error, we submit a work item to kmultipathd
(that will potentially activate the new path) and retry in ten
milliseconds.

Note that the patch doesn't retry an ioctl if the ioctl itself fails due
to a path failure.  Such retries should be handled intelligently by the
code that generated the ioctl in the first place, noting that some SCSI
commands should not be retried because they are not idempotent (XOR write
commands).  For commands that could be retried, there is a danger that
if the device rejected the SCSI command, the path could be errorneously
marked as failed, and the request would be retried on another path which
might fail too.  It can be determined if the failure happens on the
device or on the SCSI controller, but there is no guarantee that all
SCSI drivers set these flags correctly.
Signed-off-by: default avatarMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: default avatarAlasdair G Kergon <agk@redhat.com>
      35991652
    • Mike Christie's avatar
      dm mpath: delay retry of bypassed pg · f220fd4e
      Mike Christie authored 
      If I/O needs retrying and only bypassed priority groups are available,
set the pg_init_delay_retry flag to wait before retrying.

If, for example, the reason for the bypass is that the controller is
getting reset or there is a firmware upgrade happening, retrying right
away would cause a flood of log messages and retries for what could be a
few seconds or even several minutes.
Signed-off-by: default avatarMike Christie <michaelc@cs.wisc.edu>
Acked-by: default avatarMike Snitzer <snitzer@redhat.com>
Signed-off-by: default avatarAlasdair G Kergon <agk@redhat.com>
      f220fd4e
    • Mike Snitzer's avatar
      dm mpath: reduce size of struct multipath · 1fbdd2b3
      Mike Snitzer authored 
      Move multipath structure's 'lock' and 'queue_size' members to eliminate
two 4-byte holes.  Also use a bit within a single unsigned int for each
existing flag (saves 8-bytes).  This allows future flags to be added
without each consuming an unsigned int.
Signed-off-by: default avatarMike Snitzer <snitzer@redhat.com>
Acked-by: default avatarHannes Reinecke <hare@suse.de>
Signed-off-by: default avatarAlasdair G Kergon <agk@redhat.com>
      1fbdd2b3
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net · 4fc3acf2
      Linus Torvalds authored 
      Pull networking updates from David Miller:

 1) Make syn floods consume significantly less resources by

    a) Not pre-COW'ing routing metrics for SYN/ACKs
    b) Mirroring the device queue mapping of the SYN for the SYN/ACK
       reply.

    Both from Eric Dumazet.

 2) Fix calculation errors in Byte Queue Limiting, from Hiroaki SHIMODA.

 3) Validate the length requested when building a paged SKB for a
    socket, so we don't overrun the page vector accidently.  From Jason
    Wang.

 4) When netlabel is disabled, we abort all IP option processing when we
    see a CIPSO option.  This isn't the right thing to do, we should
    simply skip over it and continue processing the remaining options
    (if any).  Fix from Paul Moore.

 5) SRIOV fixes for the mellanox driver from Jack orgenstein and Marcel
    Apfelbaum.

 6) 8139cp enables the receiver before the ring address is properly
    programmed, which potentially lets the device crap over random
    memory.  Fix from Jason Wang.

 7) e1000/e1000e fixes for i217 RST handling, and an improper buffer
    address reference in jumbo RX frame processing from Bruce Allan and
    Sebastian Andrzej Siewior, respectively.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  fec_mpc52xx: fix timestamp filtering
  mcs7830: Implement link state detection
  e1000e: fix Rapid Start Technology support for i217
  e1000: look into the page instead of skb->data for e1000_tbi_adjust_stats()
  r8169: call netif_napi_del at errpaths and at driver unload
  tcp: reflect SYN queue_mapping into SYNACK packets
  tcp: do not create inetpeer on SYNACK message
  8139cp/8139too: terminate the eeprom access with the right opmode
  8139cp: set ring address before enabling receiver
  cipso: handle CIPSO options correctly when NetLabel is disabled
  net: sock: validate data_len before allocating skb in sock_alloc_send_pskb()
  bql: Avoid possible inconsistent calculation.
  bql: Avoid unneeded limit decrement.
  bql: Fix POSDIFF() to integer overflow aware.
  net/mlx4_core: Fix obscure mlx4_cmd_box parameter in QUERY_DEV_CAP
  net/mlx4_core: Check port out-of-range before using in mlx4_slave_cap
  net/mlx4_core: Fixes for VF / Guest startup flow
  net/mlx4_en: Fix improper use of "port" parameter in mlx4_en_event
  net/mlx4_core: Fix number of EQs used in ICM initialisation
  net/mlx4_core: Fix the slave_id out-of-range test in mlx4_eq_int
      4fc3acf2
    • Linus Torvalds's avatar
      Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip · 63004afa
      Linus Torvalds authored 
      Pull straggler x86 fixes from Peter Anvin:
 "Three groups of patches:

  - EFI boot stub documentation and the ability to print error messages;
  - Removal for PTRACE_ARCH_PRCTL for x32 (obsolete interface which
    should never have been ported, and the port is broken and
    potentially dangerous.)
  - ftrace stack corruption fixes.  I'm not super-happy about the
    technical implementation, but it is probably the least invasive in
    the short term.  In the future I would like a single method for
    nesting the debug stack, however."

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, x32, ptrace: Remove PTRACE_ARCH_PRCTL for x32
  x86, efi: Add EFI boot stub documentation
  x86, efi; Add EFI boot stub console support
  x86, efi: Only close open files in error path
  ftrace/x86: Do not change stacks in DEBUG when calling lockdep
  x86: Allow nesting of the debug stack IDT setting
  x86: Reset the debug_stack update counter
  ftrace: Use breakpoint method to update ftrace caller
  ftrace: Synchronize variable setting with breakpoints
      63004afa
    • Linus Torvalds's avatar
      tty: Revert the tty locking series, it needs more work · f309532b
      Linus Torvalds authored 
      This reverts the tty layer change to use per-tty locking, because it's
not correct yet, and fixing it will require some more deep surgery.

The main revert is d29f3ef3 ("tty_lock: Localise the lock"), but
there are several smaller commits that built upon it, they also get
reverted here. The list of reverted commits is:

  fde86d31 - tty: add lockdep annotations
  8f6576ad - tty: fix ldisc lock inversion trace
  d3ca8b64 - pty: Fix lock inversion
  b1d679af - tty: drop the pty lock during hangup
  abcefe5f - tty/amiserial: Add missing argument for tty_unlock()
  fd11b42e - cris: fix missing tty arg in wait_event_interruptible_tty call
  d29f3ef3 - tty_lock: Localise the lock

The revert had a trivial conflict in the 68360serial.c staging driver
that got removed in the meantime.
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      f309532b
    • Stephan Gatzka's avatar
      fec_mpc52xx: fix timestamp filtering · 9ca3cc6f
      Stephan Gatzka authored 
      skb_defer_rx_timestamp was called with a freshly allocated skb but must
be called with rskb instead.
Signed-off-by: default avatarStephan Gatzka <stephan@gatzka.org>
Cc: stable <stable@vger.kernel.org>
Acked-by: default avatarRichard Cochran <richardcochran@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9ca3cc6f
    • Ondrej Zary's avatar
      mcs7830: Implement link state detection · b1ff4f96
      Ondrej Zary authored 
      Add .status callback that detects link state changes.
Tested with MCS7832CV-AA chip (9710:7830, identified as rev.C by the driver).
Fixes https://bugzilla.kernel.org/show_bug.cgi?id=28532Signed-off-by: default avatarOndrej Zary <linux@rainbow-software.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b1ff4f96
    • Linus Torvalds's avatar
      Merge 'for-linus' branches from git://git.kernel.org/pub/scm/linux/kernel/git/viro/{vfs,signal} · 233e562e
      Linus Torvalds authored 
      Pull vfs fix and a fix from the signal changes for frv from Al Viro.

The __kernel_nlink_t for powerpc got scrogged because 64-bit powerpc
actually depended on the default "unsigned long", while 32-bit powerpc
had an explicit override to "unsigned short".  Al didn't notice, and
made both of them be the unsigned short.

The frv signal fix is fallout from simplifying the do_notify_resume()
code, and leaving an extra parenthesis.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  powerpc: Fix size of st_nlink on 64bit

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal:
  frv: Remove bogus closing parenthesis
      233e562e
    • Anton Blanchard's avatar
      powerpc: Fix size of st_nlink on 64bit · 0fd7bee1
      Anton Blanchard authored 
      commit e57f93cc (powerpc: get rid of nlink_t uses, switch to
explicitly-sized type) changed the size of st_nlink on ppc64 from
a long to a short, resulting in boot failures.
Signed-off-by: default avatarAnton Blanchard <anton@samba.org>
Signed-off-by: default avatarAl Viro <viro@zeniv.linux.org.uk>
      0fd7bee1
    • Geert Uytterhoeven's avatar
      frv: Remove bogus closing parenthesis · a3936249
      Geert Uytterhoeven authored 
      Introduced by commit 6fd84c08
("TIF_RESTORE_SIGMASK can be set only when TIF_SIGPENDING is set")
Signed-off-by: default avatarGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: default avatarAl Viro <viro@zeniv.linux.org.uk>
      a3936249
    • Bruce Allan's avatar
      e1000e: fix Rapid Start Technology support for i217 · 6d7407bf
      Bruce Allan authored 
      The definition of I217_PROXY_CTRL must use the BM_PHY_REG() macro instead
of the PHY_REG() macro for PHY page 800 register 70 since it is for a PHY
register greater than the maximum allowed by the latter macro, and fix a
typo setting the I217_MEMPWR register in e1000_suspend_workarounds_ich8lan.

Also for clarity, rename a few defines as bit definitions instead of masks.
Signed-off-by: default avatarBruce Allan <bruce.w.allan@intel.com>
Tested-by: default avatarAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
      6d7407bf
    • Sebastian Andrzej Siewior's avatar
      e1000: look into the page instead of skb->data for e1000_tbi_adjust_stats() · 281a8f24
      Sebastian Andrzej Siewior authored 
      This is another fixup where the data is not transfered into buffer
addressed by skb->data but into a page.
Signed-off-by: default avatarSebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: default avatarAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
      281a8f24
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7