- 27 Oct, 2023 1 commit
-
-
Kan Liang authored
Currently, the additional information of a branch entry is stored in a u64 space. With more and more information added, the space is running out. For example, the information of occurrences of events will be added for each branch. Two places were suggested to append the counters. https://lore.kernel.org/lkml/20230802215814.GH231007@hirez.programming.kicks-ass.net/ One place is right after the flags of each branch entry. It changes the existing struct perf_branch_entry. The later ARCH specific implementation has to be really careful to consistently pick the right struct. The other place is right after the entire struct perf_branch_stack. The disadvantage is that the pointer of the extra space has to be recorded. The common interface perf_sample_save_brstack() has to be updated. The latter is much straightforward, and should be easily understood and maintained. It is implemented in the patch. Add a new branch sample type, PERF_SAMPLE_BRANCH_COUNTERS, to indicate the event which is recorded in the branch info. The "u64 counters" may store the occurrences of several events. The information regarding the number of events/counters and the width of each counter should be exposed via sysfs as a reference for the perf tool. Define the branch_counter_nr and branch_counter_width ABI here. The support will be implemented later in the Intel-specific patch. Suggested-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by:
Kan Liang <kan.liang@linux.intel.com> Signed-off-by:
-
- 16 Oct, 2023 1 commit
-
-
Sandipan Das authored
Pass through the appropriate error code when the registration of hotplug callbacks fail during initialization, instead of returning a blanket -ENODEV. [ mingo: Updated the changelog. ] Reported-by:
Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by:
Sandipan Das <sandipan.das@amd.com> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20231016060743.332051-1-sandipan.das@amd.com
-
- 13 Oct, 2023 1 commit
-
-
Dan Carpenter authored
Some of the error paths in this function return don't initialize the error code. Return -ENODEV by default. Fixes: d6389d3c ("perf/x86/amd/uncore: Refactor uncore management") Signed-off-by:
-
- 12 Oct, 2023 2 commits
-
-
Borislav Petkov authored
The comments introduced in <asm/msr-index.h> in the merge conflict fixup in: 8f4156d5 ("Merge branch 'x86/urgent' into perf/core, to resolve conflict") ... aren't right: AMD naming schemes are more complex than implied, family 0x17 is Zen1 and 2, family 0x19 is spread around Zen 3 and 4. So there's indeed four separate MSR namespaces for: MSR_F17H_ MSR_F19H_ MSR_ZEN2_ MSR_ZEN4_ ... and the namespaces cannot be merged. Fix it up. No change in functionality. Signed-off-by:
Borislav Petkov (AMD) <bp@alien8.de> Signed-off-by:
-
Peter Zijlstra authored
Namhyung reported that bd275681 ("perf: Rewrite core context handling") regresses context switch overhead when perf-cgroup is in use together with 'slow' PMUs like uncore. Specifically, perf_cgroup_switch()'s perf_ctx_disable() / ctx_sched_out() etc.. all iterate the full list of active PMUs for that CPU, even if they don't have cgroup events. Previously there was cgrp_cpuctx_list which linked the relevant PMUs together, but that got lost in the rework. Instead of re-instruducing a similar list, let the perf_event_pmu_context iteration skip those that do not have cgroup events. This avoids growing multiple versions of the perf_event_pmu_context iteration. Measured performance (on a slightly different patch): Before) $ taskset -c 0 ./perf bench sched pipe -l 10000 -G AAA,BBB # Running 'sched/pipe' benchmark: # Executed 10000 pipe operations between two processes Total time: 0.901 [sec] 90.128700 usecs/op 11095 ops/sec After) $ taskset -c 0 ./perf bench sched pipe -l 10000 -G AAA,BBB # Running 'sched/pipe' benchmark: # Executed 10000 pipe operations between two processes Total time: 0.065 [sec] 6.560100 usecs/op 152436 ops/sec Fixes: bd275681 ("perf: Rewrite core context handling") Reported-by:
Namhyung Kim <namhyung@kernel.org> Debugged-by:
-
- 11 Oct, 2023 2 commits
-
-
Ingo Molnar authored
Resolve an MSR enumeration conflict. Conflicts: arch/x86/include/asm/msr-index.h Signed-off-by: -
Borislav Petkov (AMD) authored
Fix erratum #1485 on Zen4 parts where running with STIBP disabled can cause an #UD exception. The performance impact of the fix is negligible. Reported-by:
René Rebe <rene@exactcode.de> Signed-off-by:
-
- 09 Oct, 2023 8 commits
-
-
Sandipan Das authored
Unified Memory Controller (UMC) events were introduced with Zen 4 as a part of the Performance Monitoring Version 2 (PerfMonV2) enhancements. An event is specified using the EventSelect bits and the RdWrMask bits can be used for additional filtering of read and write requests. As of now, a maximum of 12 channels of DDR5 are available on each socket and each channel is controlled by a dedicated UMC. Each UMC, in turn, has its own set of performance monitoring counters. Since the MSR address space for the UMC PERF_CTL and PERF_CTR registers are reused across sockets, uncore groups are created on the basis of socket IDs. Hence, group exclusivity is mandatory while opening events so that events for an UMC can only be opened on CPUs which are on the same socket as the corresponding memory channel. For each socket, the total number of available UMC counters and active memory channels are determined from CPUID leaf 0x80000022 EBX and ECX respectively. Usually, on Zen 4, each UMC has four counters. MSR assignments are determined on the basis of active UMCs. E.g. if UMCs 1, 4 and 9 are active for a given socket, then * UMC 1 gets MSRs 0xc0010800 to 0xc0010807 as PERF_CTLs and PERF_CTRs * UMC 4 gets MSRs 0xc0010808 to 0xc001080f as PERF_CTLs and PERF_CTRs * UMC 9 gets MSRs 0xc0010810 to 0xc0010817 as PERF_CTLs and PERF_CTRs If there are sockets without any online CPUs when the amd_uncore driver is loaded, UMCs for such sockets will not be discoverable since the mechanism relies on executing the CPUID instruction on an online CPU from the socket. Signed-off-by:
-
Sandipan Das authored
In some cases, it may be necessary to restrict opening PMU events to a subset of CPUs. E.g. Unified Memory Controller (UMC) PMUs are specific to each active memory channel and the MSR address space for the PERF_CTL and PERF_CTR registers is reused on each socket. Thus, opening events for a specific UMC PMU should be restricted to CPUs belonging to the same socket as that of the UMC. The "cpumask" of the PMU should also reflect this accordingly. Uncore PMUs which require this can use the new group attribute in struct amd_uncore_pmu to set a valid group ID during the scan() phase. Later, during init(), an uncore context for a CPU will be unavailable if the group ID does not match. Signed-off-by:
-
Sandipan Das authored
Not all uncore PMUs may support the use of the RDPMC instruction for reading counters. In such cases, read the count from the corresponding PERF_CTR register using the RDMSR instruction. Signed-off-by:
-
Sandipan Das authored
Uncore PMUs have traditionally been registered in the module init path. This is fine for the existing DF and L3 PMUs since the CPUID information does not vary across CPUs but not for the memory controller (UMC) PMUs since information like active memory channels can vary for each socket depending on how the DIMMs have been physically populated. To overcome this, the discovery of PMU information using CPUID is moved to the startup of UNCORE_STARTING. This cannot be done in the startup of UNCORE_PREP since the hotplug callback does not run on the CPU that is being brought online. Previously, the startup of UNCORE_PREP was used for allocating uncore contexts following which, the startup of UNCORE_STARTING was used to find and reuse an existing sibling context, if possible. Any unused contexts were added to a list for reclaimation later during the startup of UNCORE_ONLINE. Since all required CPUID info is now available only after the startup of UNCORE_STARTING has completed, context allocation has been moved to the startup of UNCORE_ONLINE. Before allocating contexts, the first CPU that comes online has to take up the additional responsibility of registering the PMUs. This is a one-time process though. Since sibling discovery now happens prior to deciding whether a new context is required, there is no longer a need to track and free up unused contexts. The teardown of UNCORE_ONLINE and UNCORE_PREP functionally remain the same. Overall, the flow of control described above is achieved using the following handlers for managing uncore PMUs. It is mandatory to define them for each type of uncore PMU. * scan() runs during startup of UNCORE_STARTING and collects PMU info using CPUID. * init() runs during startup of UNCORE_ONLINE, registers PMUs and sets up uncore contexts. * move() runs during teardown of UNCORE_ONLINE and migrates uncore contexts to a shared sibling, if possible. * free() runs during teardown of UNCORE_PREP and frees up uncore contexts. Signed-off-by: -
Sandipan Das authored
Since struct amd_uncore is used to manage per-cpu contexts, rename it to amd_uncore_ctx in order to better reflect its purpose. Add a new struct amd_uncore_pmu to encapsulate all attributes which are shared by per-cpu contexts for a corresponding PMU. These include the number of counters, active mask, MSR and RDPMC base addresses, etc. Since the struct pmu is now embedded, the corresponding amd_uncore_pmu for a given event can be found by simply using container_of(). Finally, move all PMU-specific code to separate functions. While the original event management functions continue to provide the base functionality, all PMU-specific quirks and customizations are applied in separate functions. The motivation is to simplify the management of uncore PMUs. Signed-off-by:
-
Tero Kristo authored
Per-package perf events are typically registered with a single CPU only, however they can be read across all the CPUs within the package. Currently perf_event_read maps the event CPU according to the topology information to avoid an unnecessary SMP call, however perf_event_read_local deals with hard values and rejects a read with a failure if the CPU is not the one exactly registered. Allow similar mapping within the perf_event_read_local if the perf event in question can support this. This allows users like BPF code to read the package perf events properly across different CPUs within a package. Signed-off-by:
Tero Kristo <tero.kristo@linux.intel.com> Signed-off-by:
-
Tero Kristo authored
The MSR registers for reading the package residency counters are available on every CPU of the package. To avoid doing unnecessary SMP calls to read the values for these from the various CPUs inside a package, allow reading them from any CPU of the package. Suggested-by:
Kan Liang <kan.liang@intel.com> Signed-off-by:
-
Lucy Mielke authored
Some parameters or return codes were either wrong or missing, update them. Signed-off-by:
Lucy Mielke <lucymielke@icloud.com> Signed-off-by:
-
- 08 Oct, 2023 2 commits
-
-
Kees Cook authored
Prepare for the coming implementation by GCC and Clang of the __counted_by attribute. Flexible array members annotated with __counted_by can have their accesses bounds-checked at run-time via CONFIG_UBSAN_BOUNDS=y (for array indexing) and CONFIG_FORTIFY_SOURCE=y (for strcpy/memcpy-family functions). Found with Coccinelle: https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci [1] Add __counted_by for 'struct rapl_pmus'. No change in functionality intended. Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20231006201754.work.473-kees@kernel.org
-
Randy Dunlap authored
The kernel test robot reported kernel-doc warnings here: monitor.c:34: warning: Cannot understand * @rmid_free_lru A least recently used list of free RMIDs on line 34 - I thought it was a doc line monitor.c:41: warning: Cannot understand * @rmid_limbo_count count of currently unused but (potentially) on line 41 - I thought it was a doc line monitor.c:50: warning: Cannot understand * @rmid_entry - The entry in the limbo and free lists. on line 50 - I thought it was a doc line We don't have a syntax for documenting individual data items via kernel-doc, so remove the "/**" kernel-doc markers and add a hyphen for consistency. Fixes: 6a445edc ("x86/intel_rdt/cqm: Add RDT monitoring initialization") Fixes: 24247aee ("x86/intel_rdt/cqm: Improve limbo list processing") Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
- 05 Oct, 2023 1 commit
-
-
Xiu Jianfeng authored
perf/core: Rename perf_proc_update_handler() -> perf_event_max_sample_rate_handler(), for readability Follow the naming pattern of the other sysctl handlers in perf. Signed-off-by:
Xiu Jianfeng <xiujianfeng@huawei.com> Signed-off-by:
-
- 03 Oct, 2023 4 commits
-
-
David Reaver authored
Change 0 to NULL when initializing the test field of perf_msr structs to avoid the following sparse warnings: make C=2 arch/x86/events/rapl.o CHECK arch/x86/events/rapl.c ... arch/x86/events/rapl.c:540:59: warning: Using plain integer as NULL pointer arch/x86/events/rapl.c:542:59: warning: Using plain integer as NULL pointer arch/x86/events/rapl.c:543:59: warning: Using plain integer as NULL pointer arch/x86/events/rapl.c:544:59: warning: Using plain integer as NULL pointer Signed-off-by:
David Reaver <me@davidreaver.com> Signed-off-by:
-
Uros Bizjak authored
Use local64_try_cmpxchg() instead of local64_cmpxchg(*ptr, old, new) == old. X86 CMPXCHG instruction returns success in ZF flag, so this change saves a compare after CMPXCHG (and related move instruction in front of CMPXCHG). Also, try_cmpxchg() implicitly assigns old *ptr value to "old" when CMPXCHG fails. There is no need to re-read the value in the loop. No functional change intended. Signed-off-by:
Uros Bizjak <ubizjak@gmail.com> Signed-off-by:
-
Uros Bizjak authored
According to the following commit: f5fe24ef ("lockref: stop doing cpu_relax in the cmpxchg loop") "On the x86-64 architecture even a failing cmpxchg grants exclusive access to the cacheline, making it preferable to retry the failed op immediately instead of stalling with the pause instruction." Based on the above observation, remove cpu_relax() from the local64_cmpxchg() loop of rapl_event_update(). Signed-off-by:
-
Ingo Molnar authored
Signed-off-by:
-
- 02 Oct, 2023 2 commits
-
-
Tom Lendacky authored
In snp_accept_memory(), the npages variables value is calculated from phys_addr_t variables but is an unsigned int. A very large range passed into snp_accept_memory() could lead to truncating npages to zero. This doesn't happen at the moment but let's be prepared. Fixes: 6c321179 ("x86/sev: Add SNP-specific unaccepted memory support") Signed-off-by:
Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
-
Tom Lendacky authored
SNP retrieves the majority of CPUID information from the SNP CPUID page. But there are times when that information needs to be supplemented by the hypervisor, for example, obtaining the initial APIC ID of the vCPU from leaf 1. The current implementation uses the MSR protocol to retrieve the data from the hypervisor, even when a GHCB exists. The problem arises when an NMI arrives on return from the VMGEXIT. The NMI will be immediately serviced and may generate a #VC requiring communication with the hypervisor. Since a GHCB exists in this case, it will be used. As part of using the GHCB, the #VC handler will write the GHCB physical address into the GHCB MSR and the #VC will be handled. When the NMI completes, processing resumes at the site of the VMGEXIT which is expecting to read the GHCB MSR and find a CPUID MSR protocol response. Since the NMI handling overwrote the GHCB MSR response, the guest will see an invalid reply from the hypervisor and self-terminate. Fix this problem by using the GHCB when it is available. Any NMI received is properly handled because the GHCB contents are copied into a backup page and restored on NMI exit, thus preserving the active GHCB request or result. [ bp: Touchups. ] Fixes: ee0bfa08 ("x86/compressed/64: Add support for SEV-SNP CPUID table in #VC handlers") Signed-off-by:
-
- 01 Oct, 2023 15 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Fix the module compression with xz so the in-kernel decompressor works - Document a kconfig idiom to express an optional dependency between modules - Make modpost, when W=1 is given, detect broken drivers that reference .exit.* sections - Remove unused code * tag 'kbuild-fixes-v6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: remove stale code for 'source' symlink in packaging scripts modpost: Don't let "driver"s reference .exit.* vmlinux.lds.h: remove unused CPU_KEEP and CPU_DISCARD macros modpost: add missing else to the "of" check Documentation: kbuild: explain handling optional dependencies kbuild: Use CRC32 and a 1MiB dictionary for XZ compressed modules
-
Linus Torvalds authored
Merge tag 'mm-hotfixes-stable-2023-10-01-08-34' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "Fourteen hotfixes, eleven of which are cc:stable. The remainder pertain to issues which were introduced after 6.5" * tag 'mm-hotfixes-stable-2023-10-01-08-34' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: Crash: add lock to serialize crash hotplug handling selftests/mm: fix awk usage in charge_reserved_hugetlb.sh and hugetlb_reparenting_test.sh that may cause error mm: mempolicy: keep VMA walk if both MPOL_MF_STRICT and MPOL_MF_MOVE are specified mm/damon/vaddr-test: fix memory leak in damon_do_test_apply_three_regions() mm, memcg: reconsider kmem.limit_in_bytes deprecation mm: zswap: fix potential memory corruption on duplicate store arm64: hugetlb: fix set_huge_pte_at() to work with all swap entries mm: hugetlb: add huge page size param to set_huge_pte_at() maple_tree: add MAS_UNDERFLOW and MAS_OVERFLOW states maple_tree: add mas_is_active() to detect in-tree walks nilfs2: fix potential use after free in nilfs_gccache_submit_read_data() mm: abstract moving to the next PFN mm: report success more often from filemap_map_folio_range() fs: binfmt_elf_efpic: fix personality for ELF-FDPIC
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull misc driver fix from Greg KH: "Here is a single, much requested, fix for a set of misc drivers to resolve a much reported regression in the -rc series that has also propagated back to the stable releases. Sorry for the delay, lots of conference travel for a few weeks put me very far behind in patch wrangling. It has been reported by many to resolve the reported problem, and has been in linux-next with no reported issues" * tag 'char-misc-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: misc: rtsx: Fix some platforms can not boot and move the l1ss judgment to probe
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty / serial driver fixes from Greg KH: "Here are two tty/serial driver fixes for 6.6-rc4 that resolve some reported regressions: - revert a n_gsm change that ended up causing problems - 8250_port fix for irq data both have been in linux-next for over a week with no reported problems" * tag 'tty-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: Revert "tty: n_gsm: fix UAF in gsm_cleanup_mux" serial: 8250_port: Check IRQ data before use
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Ingo Molnar: "Misc fixes: a kerneldoc build warning fix, add SRSO mitigation for AMD-derived Hygon processors, and fix a SGX kernel crash in the page fault handler that can trigger when ksgxd races to reclaim the SECS special page, by making the SECS page unswappable" * tag 'x86-urgent-2023-10-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/sgx: Resolves SECS reclaim vs. page fault for EAUG race x86/srso: Add SRSO mitigation for Hygon processors x86/kgdb: Fix a kerneldoc warning when build with W=1
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fix from Ingo Molnar: "Fix a spurious kernel warning during CPU hotplug events that may trigger when timer/hrtimer softirqs are pending, which are otherwise hotplug-safe and don't merit a warning" * tag 'timers-urgent-2023-10-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timers: Tag (hr)timer softirq as hotplug safe
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fix from Ingo Molnar: "Fix a RT tasks related lockup/live-lock during CPU offlining" * tag 'sched-urgent-2023-10-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/rt: Fix live lock between select_fallback_rq() and RT push
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf event fixes from Ingo Molnar: "Misc fixes: work around an AMD microcode bug on certain models, and fix kexec kernel PMI handlers on AMD systems that get loaded on older kernels that have an unexpected register state" * tag 'perf-urgent-2023-10-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/amd: Do not WARN() on every IRQ perf/x86/amd/core: Fix overflow reset on hotplug
-
Masahiro Yamada authored
Since commit d8131c29 ("kbuild: remove $(MODLIB)/source symlink"), modules_install does not create the 'source' symlink. Remove the stale code from builddeb and kernel.spec. Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org>
-
Uwe Kleine-König authored
Drivers must not reference functions marked with __exit as these likely are not available when the code is built-in. There are few creative offenders uncovered for example in ARCH=amd64 allmodconfig builds. So only trigger the section mismatch warning for W=1 builds. The dual rule that drivers must not reference .init.* is implemented since commit 0db25245 ("modpost: don't allow *driver to reference .init.*") which however missed that .exit.* should be handled in the same way. Thanks to Masahiro Yamada and Arnd Bergmann who gave valuable hints to find this improvement. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
Masahiro Yamada authored
Remove the left-over of commit e24f6628 ("modpost: remove all traces of cpuinit/cpuexit sections"). Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com>
-
Mauricio Faria de Oliveira authored
Without this 'else' statement, an "usb" name goes into two handlers: the first/previous 'if' statement _AND_ the for-loop over 'devtable', but the latter is useless as it has no 'usb' device_id entry anyway. Tested with allmodconfig before/after patch; no changes to *.mod.c: git checkout v6.6-rc3 make -j$(nproc) allmodconfig make -j$(nproc) olddefconfig make -j$(nproc) find . -name '*.mod.c' | cpio -pd /tmp/before # apply patch make -j$(nproc) find . -name '*.mod.c' | cpio -pd /tmp/after diff -r /tmp/before/ /tmp/after/ # no difference Fixes: acbef7b7 ("modpost: fix module autoloading for OF devices with generic compatible property") Signed-off-by:Mauricio Faria de Oliveira <mfo@canonical.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds authored
Pull ARM SoC fixes from Arnd Bergmann: "These are the latest bug fixes that have come up in the soc tree. Most of these are fairly minor. Most notably, the majority of changes this time are not for dts files as usual. - Updates to the addresses of the broadcom and aspeed entries in the MAINTAINERS file. - Defconfig updates to address a regression on samsung and a build warning from an unknown Kconfig symbol - Build fixes for the StrongARM and Uniphier platforms - Code fixes for SCMI and FF-A firmware drivers, both of which had a simple bug that resulted in invalid data, and a lesser fix for the optee firmware driver - Multiple fixes for the recently added loongson/loongarch "guts" soc driver - Devicetree fixes for RISC-V on the startfive platform, addressing issues with NOR flash, usb and uart. - Multiple fixes for NXP i.MX8/i.MX9 dts files, fixing problems with clock, gpio, hdmi settings and the Makefile - Bug fixes for i.MX firmware code and the OCOTP soc driver - Multiple fixes for the TI sysc bus driver - Minor dts updates for TI omap dts files, to address boot time warnings and errors" * tag 'soc-fixes-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (35 commits) MAINTAINERS: Fix Florian Fainelli's email address arm64: defconfig: enable syscon-poweroff driver ARM: locomo: fix locomolcd_power declaration soc: loongson: loongson2_guts: Remove unneeded semicolon soc: loongson: loongson2_guts: Convert to devm_platform_ioremap_resource() soc: loongson: loongson_pm2: Populate children syscon nodes dt-bindings: soc: loongson,ls2k-pmc: Allow syscon-reboot/syscon-poweroff as child soc: loongson: loongson_pm2: Drop useless of_device_id compatible dt-bindings: soc: loongson,ls2k-pmc: Use fallbacks for ls2k-pmc compatible soc: loongson: loongson_pm2: Add dependency for INPUT arm64: defconfig: remove CONFIG_COMMON_CLK_NPCM8XX=y ARM: uniphier: fix cache kernel-doc warnings MAINTAINERS: aspeed: Update Andrew's email address MAINTAINERS: aspeed: Update git tree URL firmware: arm_ffa: Don't set the memory region attributes for MEM_LEND arm64: dts: imx: Add imx8mm-prt8mm.dtb to build arm64: dts: imx8mm-evk: Fix hdmi@3d node soc: imx8m: Enable OCOTP clock for imx8mm before reading registers arm64: dts: imx8mp-beacon-kit: Fix audio_pll2 clock arm64: dts: imx8mp: Fix SDMA2/3 clocks ... -
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-traceLinus Torvalds authored
Pull tracing fixes from Steven Rostedt: - Make sure 32-bit applications using user events have aligned access when running on a 64-bit kernel. - Add cond_resched in the loop that handles converting enums in print_fmt string is trace events. - Fix premature wake ups of polling processes in the tracing ring buffer. When a task polls waiting for a percentage of the ring buffer to be filled, the writer still will wake it up at every event. Add the polling's percentage to the "shortest_full" list to tell the writer when to wake it up. - For eventfs dir lookups on dynamic events, an event system's only event could be removed, leaving its dentry with no children. This is totally legitimate. But in eventfs_release() it must not access the children array, as it is only allocated when the dentry has children. * tag 'trace-v6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: eventfs: Test for dentries array allocated in eventfs_release() tracing/user_events: Align set_bit() address for all archs tracing: relax trace_event_eval_update() execution with cond_resched() ring-buffer: Update "shortest_full" in polling
-
- 30 Sep, 2023 1 commit
-
-
Steven Rostedt (Google) authored
The dcache_dir_open_wrapper() could be called when a dynamic event is being deleted leaving a dentry with no children. In this case the dlist->dentries array will never be allocated. This needs to be checked for in eventfs_release(), otherwise it will trigger a NULL pointer dereference. Link: https://lore.kernel.org/linux-trace-kernel/20230930090106.1c3164e9@rorschach.local.home Cc: Mark Rutland <mark.rutland@arm.com> Acked-by:
Masami Hiramatsu (Google) <mhiramat@kernel.org> Fixes: ef36b4f9 ("eventfs: Remember what dentries were created on dir open") Signed-off-by:
Steven Rostedt (Google) <rostedt@goodmis.org>
-
