- 11 Jun, 2020 4 commits
-
-
Xinwei Kong authored
[ Upstream commit bfda0445 ] Because of out-of-order execution about some CPU architecture, In this debug stage we find Completing spi interrupt enable -> prodrucing TXEI interrupt -> running "interrupt_transfer" function will prior to set "dw->rx and dws->rx_end" data, so this patch add memory barrier to enable dw->rx and dw->rx_end to be visible and solve to send SPI data error. eg: it will fix to this following low possibility error in testing environment which using SPI control to connect TPM Modules kernel: tpm tpm0: Operation Timed out kernel: tpm tpm0: tpm_relinquish_locality: : error -1 Signed-off-by:
fengsheng <fengsheng5@huawei.com> Signed-off-by:
Xinwei Kong <kong.kongxinwei@hisilicon.com> Link: https://lore.kernel.org/r/1578019930-55858-1-git-send-email-kong.kongxinwei@hisilicon.comSigned-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Zhen Lei authored
commit 7284fdf3 upstream. This ought to be an omission in e6194923 ("esp: Fix memleaks on error paths."). The memleak on error path in esp6_input is similar to esp_input of esp4. Fixes: e6194923 ("esp: Fix memleaks on error paths.") Fixes: 3f297707 ("ipsec: check return value of skb_to_sgvec always") Signed-off-by:
Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eugeniu Rosca authored
commit e87581fe upstream. If usb_ep_autoconfig() fails (i.e. returns a null endpoint descriptor), we expect afunc_bind() to fail (i.e. return a negative error code). However, due to v4.10-rc1 commit f1d3861d ("usb: gadget: f_uac2: fix error handling at afunc_bind"), afunc_bind() returns zero, telling the caller that it succeeded. This then generates NULL pointer dereference in below scenario on Rcar H3-ES20-Salvator-X target: rcar-gen3:/home/root# modprobe g_audio [ 626.521155] g_audio gadget: afunc_bind:565 Error! [ 626.526319] g_audio gadget: Linux USB Audio Gadget, version: Feb 2, 2012 [ 626.533405] g_audio gadget: g_audio ready rcar-gen3:/home/root# rcar-gen3:/home/root# modprobe -r g_audio [ 728.256707] ================================================================== [ 728.264293] BUG: KASAN: null-ptr-deref in u_audio_stop_capture+0x70/0x268 [u_audio] [ 728.272244] Read of size 8 at addr 00000000000000a0 by task modprobe/2545 [ 728.279309] [ 728.280849] CPU: 0 PID: 2545 Comm: modprobe Tainted: G WC 4.14.47+ #152 [ 728.288778] Hardware name: Renesas Salvator-X board based on r8a7795 ES2.0+ (DT) [ 728.296454] Call trace: [ 728.299151] [<ffff2000080925ac>] dump_backtrace+0x0/0x364 [ 728.304808] [<ffff200008092924>] show_stack+0x14/0x1c [ 728.310081] [<ffff200008f8d5cc>] dump_stack+0x108/0x174 [ 728.315522] [<ffff2000083c77c8>] kasan_report+0x1fc/0x354 [ 728.321134] [<ffff2000083c611c>] __asan_load8+0x24/0x94 [ 728.326600] [<ffff2000021e1618>] u_audio_stop_capture+0x70/0x268 [u_audio] [ 728.333735] [<ffff2000021f8b7c>] afunc_disable+0x44/0x60 [usb_f_uac2] [ 728.340503] [<ffff20000218177c>] usb_remove_function+0x9c/0x210 [libcomposite] [ 728.348060] [<ffff200002183320>] remove_config.isra.2+0x1d8/0x218 [libcomposite] [ 728.355788] [<ffff200002186c54>] __composite_unbind+0x104/0x1f8 [libcomposite] [ 728.363339] [<ffff200002186d58>] composite_unbind+0x10/0x18 [libcomposite] [ 728.370536] [<ffff20000152f158>] usb_gadget_remove_driver+0xc0/0x170 [udc_core] [ 728.378172] [<ffff20000153154c>] usb_gadget_unregister_driver+0x1cc/0x258 [udc_core] [ 728.386274] [<ffff200002180de8>] usb_composite_unregister+0x10/0x18 [libcomposite] [ 728.394116] [<ffff2000021d035c>] audio_driver_exit+0x14/0x28 [g_audio] [ 728.400878] [<ffff200008213ed4>] SyS_delete_module+0x288/0x32c [ 728.406935] Exception stack(0xffff8006cf6c7ec0 to 0xffff8006cf6c8000) [ 728.413624] 7ec0: 0000000006136428 0000000000000800 0000000000000000 0000ffffd706efe8 [ 728.421718] 7ee0: 0000ffffd706efe9 000000000000000a 1999999999999999 0000000000000000 [ 728.429792] 7f00: 000000000000006a 000000000042c078 0000000000000000 0000000000000005 [ 728.437870] 7f20: 0000000000000000 0000000000000000 0000000000000004 0000000000000000 [ 728.445952] 7f40: 000000000042bfc8 0000ffffbc7c8f40 0000000000000000 00000000061363c0 [ 728.454035] 7f60: 0000000006136428 0000000000000000 0000000000000000 0000000006136428 [ 728.462114] 7f80: 000000000042c000 0000ffffd7071448 000000000042c000 0000000000000000 [ 728.470190] 7fa0: 00000000061350c0 0000ffffd7070010 000000000041129c 0000ffffd7070010 [ 728.478281] 7fc0: 0000ffffbc7c8f48 0000000060000000 0000000006136428 000000000000006a [ 728.486351] 7fe0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 728.494434] [<ffff200008084780>] el0_svc_naked+0x34/0x38 [ 728.499957] ================================================================== [ 728.507801] Unable to handle kernel NULL pointer dereference at virtual address 000000a0 [ 728.517742] Mem abort info: [ 728.520993] Exception class = DABT (current EL), IL = 32 bits [ 728.527375] SET = 0, FnV = 0 [ 728.530731] EA = 0, S1PTW = 0 [ 728.534361] Data abort info: [ 728.537650] ISV = 0, ISS = 0x00000006 [ 728.541863] CM = 0, WnR = 0 [ 728.545167] user pgtable: 4k pages, 48-bit VAs, pgd = ffff8006c6100000 [ 728.552156] [00000000000000a0] *pgd=0000000716a8d003 [ 728.557519] , *pud=00000007116fc003 [ 728.561259] , *pmd=0000000000000000 [ 728.564985] Internal error: Oops: 96000006 [#1] PREEMPT SMP [ 728.570815] Modules linked in: [ 728.574023] usb_f_uac2 [ 728.576560] u_audio [ 728.578827] g_audio(-) [ 728.581361] libcomposite [ 728.584071] configfs [ 728.586428] aes_ce_blk [ 728.588960] sata_rcar [ 728.591421] crypto_simd [ 728.594039] cryptd [ 728.596217] libata [ 728.598396] aes_ce_cipher [ 728.601188] crc32_ce [ 728.603542] ghash_ce [ 728.605896] gf128mul [ 728.608250] aes_arm64 [ 728.610692] scsi_mod [ 728.613046] sha2_ce [ 728.615313] xhci_plat_hcd [ 728.618106] sha256_arm64 [ 728.620811] sha1_ce [ 728.623077] renesas_usbhs [ 728.625869] xhci_hcd [ 728.628243] renesas_usb3 [ 728.630948] sha1_generic [ 728.633670] ravb_streaming(C) [ 728.636814] udc_core [ 728.639168] cpufreq_dt [ 728.641697] rcar_gen3_thermal [ 728.644840] usb_dmac [ 728.647194] pwm_rcar [ 728.649548] thermal_sys [ 728.652165] virt_dma [ 728.654519] mch_core(C) [ 728.657137] pwm_bl [ 728.659315] snd_soc_rcar [ 728.662020] snd_aloop [ 728.664462] snd_soc_generic_card [ 728.667869] snd_soc_ak4613 [ 728.670749] ipv6 [ 728.672768] autofs4 [ 728.675052] CPU: 0 PID: 2545 Comm: modprobe Tainted: G B WC 4.14.47+ #152 [ 728.682973] Hardware name: Renesas Salvator-X board based on r8a7795 ES2.0+ (DT) [ 728.690637] task: ffff8006ced38000 task.stack: ffff8006cf6c0000 [ 728.696814] PC is at u_audio_stop_capture+0x70/0x268 [u_audio] [ 728.702896] LR is at u_audio_stop_capture+0x70/0x268 [u_audio] [ 728.708964] pc : [<ffff2000021e1618>] lr : [<ffff2000021e1618>] pstate: 60000145 [ 728.716620] sp : ffff8006cf6c7a50 [ 728.720154] x29: ffff8006cf6c7a50 [ 728.723760] x28: ffff8006ced38000 [ 728.727272] x27: ffff200008fd7000 [ 728.730857] x26: ffff2000021d2340 [ 728.734361] x25: 0000000000000000 [ 728.737948] x24: ffff200009e94b08 [ 728.741452] x23: 00000000000000a0 [ 728.745052] x22: 00000000000000a8 [ 728.748558] x21: 1ffff000d9ed8f7c [ 728.752142] x20: ffff8006d671a800 [ 728.755646] x19: 0000000000000000 [ 728.759231] x18: 0000000000000000 [ 728.762736] x17: 0000ffffbc7c8f40 [ 728.766320] x16: ffff200008213c4c [ 728.769823] x15: 0000000000000000 [ 728.773408] x14: 0720072007200720 [ 728.776912] x13: 0720072007200720 [ 728.780497] x12: ffffffffffffffff [ 728.784001] x11: 0000000000000040 [ 728.787598] x10: 0000000000001600 [ 728.791103] x9 : ffff8006cf6c77a0 [ 728.794689] x8 : ffff8006ced39660 [ 728.798193] x7 : ffff20000811c738 [ 728.801794] x6 : 0000000000000000 [ 728.805299] x5 : dfff200000000000 [ 728.808885] x4 : ffff8006ced38000 [ 728.812390] x3 : ffff200008fb46e8 [ 728.815976] x2 : 0000000000000007 [ 728.819480] x1 : 3ba68643e7431500 [ 728.823066] x0 : 0000000000000000 [ 728.826574] Process modprobe (pid: 2545, stack limit = 0xffff8006cf6c0000) [ 728.833704] Call trace: [ 728.836292] Exception stack(0xffff8006cf6c7910 to 0xffff8006cf6c7a50) [ 728.842987] 7900: 0000000000000000 3ba68643e7431500 [ 728.851084] 7920: 0000000000000007 ffff200008fb46e8 ffff8006ced38000 dfff200000000000 [ 728.859173] 7940: 0000000000000000 ffff20000811c738 ffff8006ced39660 ffff8006cf6c77a0 [ 728.867248] 7960: 0000000000001600 0000000000000040 ffffffffffffffff 0720072007200720 [ 728.875323] 7980: 0720072007200720 0000000000000000 ffff200008213c4c 0000ffffbc7c8f40 [ 728.883412] 79a0: 0000000000000000 0000000000000000 ffff8006d671a800 1ffff000d9ed8f7c [ 728.891485] 79c0: 00000000000000a8 00000000000000a0 ffff200009e94b08 0000000000000000 [ 728.899561] 79e0: ffff2000021d2340 ffff200008fd7000 ffff8006ced38000 ffff8006cf6c7a50 [ 728.907636] 7a00: ffff2000021e1618 ffff8006cf6c7a50 ffff2000021e1618 0000000060000145 [ 728.915710] 7a20: 0000000000000008 0000000000000000 0000ffffffffffff 3ba68643e7431500 [ 728.923780] 7a40: ffff8006cf6c7a50 ffff2000021e1618 [ 728.928880] [<ffff2000021e1618>] u_audio_stop_capture+0x70/0x268 [u_audio] [ 728.936032] [<ffff2000021f8b7c>] afunc_disable+0x44/0x60 [usb_f_uac2] [ 728.942822] [<ffff20000218177c>] usb_remove_function+0x9c/0x210 [libcomposite] [ 728.950385] [<ffff200002183320>] remove_config.isra.2+0x1d8/0x218 [libcomposite] [ 728.958134] [<ffff200002186c54>] __composite_unbind+0x104/0x1f8 [libcomposite] [ 728.965689] [<ffff200002186d58>] composite_unbind+0x10/0x18 [libcomposite] [ 728.972882] [<ffff20000152f158>] usb_gadget_remove_driver+0xc0/0x170 [udc_core] [ 728.980522] [<ffff20000153154c>] usb_gadget_unregister_driver+0x1cc/0x258 [udc_core] [ 728.988638] [<ffff200002180de8>] usb_composite_unregister+0x10/0x18 [libcomposite] [ 728.996472] [<ffff2000021d035c>] audio_driver_exit+0x14/0x28 [g_audio] [ 729.003231] [<ffff200008213ed4>] SyS_delete_module+0x288/0x32c [ 729.009278] Exception stack(0xffff8006cf6c7ec0 to 0xffff8006cf6c8000) [ 729.015946] 7ec0: 0000000006136428 0000000000000800 0000000000000000 0000ffffd706efe8 [ 729.024022] 7ee0: 0000ffffd706efe9 000000000000000a 1999999999999999 0000000000000000 [ 729.032099] 7f00: 000000000000006a 000000000042c078 0000000000000000 0000000000000005 [ 729.040172] 7f20: 0000000000000000 0000000000000000 0000000000000004 0000000000000000 [ 729.048263] 7f40: 000000000042bfc8 0000ffffbc7c8f40 0000000000000000 00000000061363c0 [ 729.056337] 7f60: 0000000006136428 0000000000000000 0000000000000000 0000000006136428 [ 729.064411] 7f80: 000000000042c000 0000ffffd7071448 000000000042c000 0000000000000000 [ 729.072484] 7fa0: 00000000061350c0 0000ffffd7070010 000000000041129c 0000ffffd7070010 [ 729.080563] 7fc0: 0000ffffbc7c8f48 0000000060000000 0000000006136428 000000000000006a [ 729.088636] 7fe0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 729.096733] [<ffff200008084780>] el0_svc_naked+0x34/0x38 [ 729.102259] Code: 9597d1b3 aa1703e0 9102a276 958792b9 (f9405275) [ 729.108617] ---[ end trace 7560c5fa3d100243 ]--- After this patch is applied, the issue is fixed: rcar-gen3:/home/root# modprobe g_audio [ 59.217127] g_audio gadget: afunc_bind:565 Error! [ 59.222329] g_audio ee020000.usb: failed to start g_audio: -19 modprobe: ERROR: could not insert 'g_audio': No such device rcar-gen3:/home/root# modprobe -r g_audio rcar-gen3:/home/root# Fixes: f1d3861d ("usb: gadget: f_uac2: fix error handling at afunc_bind") Signed-off-by:
Eugeniu Rosca <erosca@de.adit-jv.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Hannes Reinecke authored
commit b8018b97 upstream. When checking the model and vendor string we need to use the minimum value of either string, otherwise we'll miss out on wildcard matches. And we should take care when matching with zero size strings; results might be unpredictable. With this patch the rules for matching devinfo strings are as follows: - Vendor strings must match exactly - Empty Model strings will only match if the devinfo model is also empty - Model strings shorter than the devinfo model string will not match Fixes: 5e7ff2ca ("SCSI: fix new bug in scsi_dev_info_list string matching") Signed-off-by:
Hannes Reinecke <hare@suse.com> Reviewed-by:
Alan Stern <stern@rowland.harvard.edu> Reviewed-by:
Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
- 03 Jun, 2020 36 commits
-
-
Greg Kroah-Hartman authored
-
Benjamin Block authored
[ Upstream commit 106d45f3 ] When tracing instances where we open and close WKA ports, we also pass the request-ID of the respective FSF command. But after successfully sending the FSF command we must not use the request-object anymore, as this might result in an use-after-free (see "zfcp: fix request object use-after-free in send path causing seqno errors" ). To fix this add a new variable that caches the request-ID before sending the request. This won't change during the hand-off to the FCP channel, and so it's safe to trace this cached request-ID later, instead of using the request object. Signed-off-by:
Benjamin Block <bblock@linux.ibm.com> Fixes: d27a7cb9 ("zfcp: trace on request for open and close of WKA port") Cc: <stable@vger.kernel.org> #2.6.38+ Reviewed-by:
Steffen Maier <maier@linux.ibm.com> Reviewed-by:
Jens Remus <jremus@linux.ibm.com> Signed-off-by:
-
Salil Mehta authored
commit 4d96e13e upstream. This patch fixes the missing device reference release-after-use in the positive leg of the roce reset API of the HNS DSAF. Fixes: c969c6e7 ("net: hns: Fix object reference leaks in hns_dsaf_roce_reset()") Reported-by:
John Garry <john.garry@huawei.com> Signed-off-by:
Salil Mehta <salil.mehta@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Guoqing Jiang authored
commit e00164a0 upstream. err_spi is used when SERIAL_SC16IS7XX_SPI is enabled, so make the label only available under SERIAL_SC16IS7XX_SPI option. Otherwise, the below warning appears. drivers/tty/serial/sc16is7xx.c:1523:1: warning: label ‘err_spi’ defined but not used [-Wunused-label] err_spi: ^~~~~~~ Signed-off-by:
Guoqing Jiang <gqjiang@suse.com> Fixes: ac0cdb3d ("sc16is7xx: missing unregister/delete driver on error in sc16is7xx_init()") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Liviu Dudau authored
commit 6ade2032 upstream. find_vmap_area() can return a NULL pointer and we're going to dereference it without checking it first. Use the existing find_vm_area() function which does exactly what we want and checks for the NULL pointer. Link: http://lkml.kernel.org/r/20181228171009.22269-1-liviu@dudau.co.uk Fixes: f3c01d2f ("mm: vmalloc: avoid racy handling of debugobjects in vunmap") Signed-off-by:
Liviu Dudau <liviu@dudau.co.uk> Reviewed-by:
Andrew Morton <akpm@linux-foundation.org> Cc: Chintan Pandya <cpandya@codeaurora.org> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Roopa Prabhu authored
commit 56a49d70 upstream. This fix addresses https://bugzilla.kernel.org/show_bug.cgi?id=201071 Commit 5025f7f7 wrongly relied on __dev_change_flags to notify users of dev flag changes in the case when dev->rtnl_link_state = RTNL_LINK_INITIALIZED. Fix it by indicating flag changes explicitly to __dev_notify_flags. Fixes: 5025f7f7 ("rtnetlink: add rtnl_link_state check in rtnl_configure_link") Reported-By:
Liam mcbirnie <liam.mcbirnie@boeing.com> Signed-off-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by:
-
Thomas Gleixner authored
commit a33a5d2d upstream. The generic pending interrupt mechanism moves interrupts from the interrupt handler on the original target CPU to the new destination CPU. This is required for x86 and ia64 due to the way the interrupt delivery and acknowledge works if the interrupts are not remapped. However that update can fail for various reasons. Some of them are valid reasons to discard the pending update, but the case, when the previous move has not been fully cleaned up is not a legit reason to fail. Check the return value of irq_do_set_affinity() for -EBUSY, which indicates a pending cleanup, and rearm the pending move in the irq dexcriptor so it's tried again when the next interrupt arrives. Fixes: 996c5912 ("x86/irq: Plug vector cleanup race") Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Tested-by:
Song Liu <songliubraving@fb.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <liu.song.a23@gmail.com> Cc: Dmitry Safonov <0x7f454c46@gmail.com> Cc: stable@vger.kernel.org Cc: Mike Travis <mike.travis@hpe.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Tariq Toukan <tariqt@mellanox.com> Cc: Guenter Roeck <linux@roeck-us.net> Link: https://lkml.kernel.org/r/20180604162224.386544292@linutronix.deSigned-off-by:
-
Pablo Neira Ayuso authored
commit 4946ea5c upstream. >> include/linux/netfilter/nf_conntrack_pptp.h:13:20: warning: 'const' type qualifier on return type has no effect [-Wignored-qualifiers] extern const char *const pptp_msg_name(u_int16_t msg); ^~~~~~ Reported-by:
kbuild test robot <lkp@intel.com> Fixes: 4c559f15 ("netfilter: nf_conntrack_pptp: prevent buffer overflows in debug code") Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Qiushi Wu authored
commit a068aab4 upstream. kobject_init_and_add() takes reference even when it fails. If this function returns an error, kobject_put() must be called to properly clean up the memory associated with the object. Previous commit "b8eb7183" fixed a similar problem. Fixes: 07699f9a ("bonding: add sysfs /slave dir for bond slave devices.") Signed-off-by:
Qiushi Wu <wu000273@umn.edu> Acked-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by:
-
Qiushi Wu authored
commit 15c97385 upstream. In function qlcnic_83xx_interrupt_test(), function qlcnic_83xx_diag_alloc_res() is not handled by function qlcnic_83xx_diag_free_res() after a call of the function qlcnic_alloc_mbx_args() failed. Fix this issue by adding a jump target "fail_mbx_args", and jump to this new target when qlcnic_alloc_mbx_args() failed. Fixes: b6b4316c ("qlcnic: Handle qlcnic_alloc_mbx_args() failure") Signed-off-by:
-
Pablo Neira Ayuso authored
commit 4c559f15 upstream. Dan Carpenter says: "Smatch complains that the value for "cmd" comes from the network and can't be trusted." Add pptp_msg_name() helper function that checks for the array boundary. Fixes: f09943fe ("[NETFILTER]: nf_conntrack/nf_nat: add PPTP helper port") Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Phil Sutter authored
commit a164b95a upstream. If IPSET_FLAG_SKIP_SUBCOUNTER_UPDATE is set, user requested to not update counters in sub sets. Therefore IPSET_FLAG_SKIP_COUNTER_UPDATE must be set, not unset. Fixes: 6e01781d ("netfilter: ipset: set match: add support to match the counters") Signed-off-by:
Phil Sutter <phil@nwl.cc> Signed-off-by:
-
Michael Braun authored
commit e9c284ec upstream. Currently, using the bridge reject target with tagged packets results in untagged packets being sent back. Fix this by mirroring the vlan id as well. Fixes: 85f5b308 ("netfilter: bridge: add reject support") Signed-off-by:
Michael Braun <michael-dev@fami-braun.de> Signed-off-by:
-
Xin Long authored
commit 976eba8a upstream. In Commit dd9ee344 ("vti4: Fix a ipip packet processing bug in 'IPCOMP' virtual tunnel"), it tries to receive IPIP packets in vti by calling xfrm_input(). This case happens when a small packet or frag sent by peer is too small to get compressed. However, xfrm_input() will still get to the IPCOMP path where skb sec_path is set, but never dropped while it should have been done in vti_ipcomp4_protocol.cb_handler(vti_rcv_cb), as it's not an ipcomp4 packet. This will cause that the packet can never pass xfrm4_policy_check() in the upper protocol rcv functions. So this patch is to call ip_tunnel_rcv() to process IPIP packets instead. Fixes: dd9ee344 ("vti4: Fix a ipip packet processing bug in 'IPCOMP' virtual tunnel") Reported-by:
Xiumei Mu <xmu@redhat.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Jeremy Sowden authored
commit f981c57f upstream. The ipip tunnel introduced in commit dd9ee344 ("vti4: Fix a ipip packet processing bug in 'IPCOMP' virtual tunnel") largely duplicated the existing vti_input and vti_recv functions. Refactored to deduplicate the common code. Signed-off-by:
Jeremy Sowden <jeremy@azazel.net> Signed-off-by:
-
Xin Long authored
commit f6a23d85 upstream. This patch is to fix a crash: [ ] kasan: GPF could be caused by NULL-ptr deref or user memory access [ ] general protection fault: 0000 [#1] SMP KASAN PTI [ ] RIP: 0010:ipv6_local_error+0xac/0x7a0 [ ] Call Trace: [ ] xfrm6_local_error+0x1eb/0x300 [ ] xfrm_local_error+0x95/0x130 [ ] __xfrm6_output+0x65f/0xb50 [ ] xfrm6_output+0x106/0x46f [ ] udp_tunnel6_xmit_skb+0x618/0xbf0 [ip6_udp_tunnel] [ ] vxlan_xmit_one+0xbc6/0x2c60 [vxlan] [ ] vxlan_xmit+0x6a0/0x4276 [vxlan] [ ] dev_hard_start_xmit+0x165/0x820 [ ] __dev_queue_xmit+0x1ff0/0x2b90 [ ] ip_finish_output2+0xd3e/0x1480 [ ] ip_do_fragment+0x182d/0x2210 [ ] ip_output+0x1d0/0x510 [ ] ip_send_skb+0x37/0xa0 [ ] raw_sendmsg+0x1b4c/0x2b80 [ ] sock_sendmsg+0xc0/0x110 This occurred when sending a v4 skb over vxlan6 over ipsec, in which case skb->protocol == htons(ETH_P_IPV6) while skb->sk->sk_family == AF_INET in xfrm_local_error(). Then it will go to xfrm6_local_error() where it tries to get ipv6 info from a ipv4 sk. This issue was actually fixed by Commit 628e341f ("xfrm: make local error reporting more robust"), but brought back by Commit 844d4874 ("xfrm: choose protocol family by skb protocol"). So to fix it, we should call xfrm6_local_error() only when skb->protocol is htons(ETH_P_IPV6) and skb->sk->sk_family is AF_INET6. Fixes: 844d4874 ("xfrm: choose protocol family by skb protocol") Reported-by:
-
Xin Long authored
commit ed17b8d3 upstream. This waring can be triggered simply by: # ip xfrm policy update src 192.168.1.1/24 dst 192.168.1.2/24 dir in \ priority 1 mark 0 mask 0x10 #[1] # ip xfrm policy update src 192.168.1.1/24 dst 192.168.1.2/24 dir in \ priority 2 mark 0 mask 0x1 #[2] # ip xfrm policy update src 192.168.1.1/24 dst 192.168.1.2/24 dir in \ priority 2 mark 0 mask 0x10 #[3] Then dmesg shows: [ ] WARNING: CPU: 1 PID: 7265 at net/xfrm/xfrm_policy.c:1548 [ ] RIP: 0010:xfrm_policy_insert_list+0x2f2/0x1030 [ ] Call Trace: [ ] xfrm_policy_inexact_insert+0x85/0xe50 [ ] xfrm_policy_insert+0x4ba/0x680 [ ] xfrm_add_policy+0x246/0x4d0 [ ] xfrm_user_rcv_msg+0x331/0x5c0 [ ] netlink_rcv_skb+0x121/0x350 [ ] xfrm_netlink_rcv+0x66/0x80 [ ] netlink_unicast+0x439/0x630 [ ] netlink_sendmsg+0x714/0xbf0 [ ] sock_sendmsg+0xe2/0x110 The issue was introduced by Commit 7cb8a939 ("xfrm: Allow inserting policies with matching mark and different priorities"). After that, the policies [1] and [2] would be able to be added with different priorities. However, policy [3] will actually match both [1] and [2]. Policy [1] was matched due to the 1st 'return true' in xfrm_policy_mark_match(), and policy [2] was matched due to the 2nd 'return true' in there. It caused WARN_ON() in xfrm_policy_insert_list(). This patch is to fix it by only (the same value and priority) as the same policy in xfrm_policy_mark_match(). Thanks to Yuehaibing, we could make this fix better. v1->v2: - check policy->mark.v == pol->mark.v only without mask. Fixes: 7cb8a939 ("xfrm: Allow inserting policies with matching mark and different priorities") Reported-by:
-
Xin Long authored
commit afcaf61b upstream. For beet mode, when it's ipv6 inner address with nexthdrs set, the packet format might be: ---------------------------------------------------- | outer | | dest | | | ESP | ESP | | IP hdr | ESP | opts.| TCP | Data | Trailer | ICV | ---------------------------------------------------- The nexthdr from ESP could be NEXTHDR_HOP(0), so it should continue processing the packet when nexthdr returns 0 in xfrm_input(). Otherwise, when ipv6 nexthdr is set, the packet will be dropped. I don't see any error cases that nexthdr may return 0. So fix it by removing the check for nexthdr == 0. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Alexander Dahl authored
commit 88743470 upstream. The intermediate result of the old term (4UL * 1024 * 1024 * 1024) is 4 294 967 296 or 0x100000000 which is no problem on 64 bit systems. The patch does not change the later overall result of 0x100000 for MAX_DMA32_PFN (after it has been shifted by PAGE_SHIFT). The new calculation yields the same result, but does not require 64 bit arithmetic. On 32 bit systems the old calculation suffers from an arithmetic overflow in that intermediate term in braces: 4UL aka unsigned long int is 4 byte wide and an arithmetic overflow happens (the 0x100000000 does not fit in 4 bytes), the in braces result is truncated to zero, the following right shift does not alter that, so MAX_DMA32_PFN evaluates to 0 on 32 bit systems. That wrong value is a problem in a comparision against MAX_DMA32_PFN in the init code for swiotlb in pci_swiotlb_detect_4gb() to decide if swiotlb should be active. That comparison yields the opposite result, when compiling on 32 bit systems. This was not possible before 1b7e03ef ("x86, NUMA: Enable emulation on 32bit too") when that MAX_DMA32_PFN was first made visible to x86_32 (and which landed in v3.0). In practice this wasn't a problem, unless CONFIG_SWIOTLB is active on x86-32. However if one has set CONFIG_IOMMU_INTEL, since c5a5dc4c ("iommu/vt-d: Don't switch off swiotlb if bounce page is used") there's a dependency on CONFIG_SWIOTLB, which was not necessarily active before. That landed in v5.4, where we noticed it in the fli4l Linux distribution. We have CONFIG_IOMMU_INTEL active on both 32 and 64 bit kernel configs there (I could not find out why, so let's just say historical reasons). The effect is at boot time 64 MiB (default size) were allocated for bounce buffers now, which is a noticeable amount of memory on small systems like pcengines ALIX 2D3 with 256 MiB memory, which are still frequently used as home routers. We noticed this effect when migrating from kernel v4.19 (LTS) to v5.4 (LTS) in fli4l and got that kernel messages for example: Linux version 5.4.22 (buildroot@buildroot) (gcc version 7.3.0 (Buildroot 2018.02.8)) #1 SMP Mon Nov 26 23:40:00 CET 2018 … Memory: 183484K/261756K available (4594K kernel code, 393K rwdata, 1660K rodata, 536K init, 456K bss , 78272K reserved, 0K cma-reserved, 0K highmem) … PCI-DMA: Using software bounce buffering for IO (SWIOTLB) software IO TLB: mapped [mem 0x0bb78000-0x0fb78000] (64MB) The initial analysis and the suggested fix was done by user 'sourcejedi' at stackoverflow and explicitly marked as GPLv2 for inclusion in the Linux kernel: https://unix.stackexchange.com/a/520525/50007 The new calculation, which does not suffer from that overflow, is the same as for arch/mips now as suggested by Robin Murphy. The fix was tested by fli4l users on round about two dozen different systems, including both 32 and 64 bit archs, bare metal and virtualized machines. [ bp: Massage commit message. ] Fixes: 1b7e03ef ("x86, NUMA: Enable emulation on 32bit too") Reported-by:
Alan Jenkins <alan.christopher.jenkins@gmail.com> Suggested-by:
Robin Murphy <robin.murphy@arm.com> Signed-off-by:
Alexander Dahl <post@lespocky.de> Signed-off-by:
Borislav Petkov <bp@suse.de> Reviewed-by:
-
Linus Lüssing authored
commit e2d4a80f upstream. On a non-forwarding 802.11s link between two fairly busy neighboring nodes (iperf with -P 16 at ~850MBit/s TCP; 1733.3 MBit/s VHT-MCS 9 80MHz short GI VHT-NSS 4), so with frequent PREQ retries, usually after around 30-40 seconds the following crash would occur: [ 1110.822428] Unable to handle kernel read from unreadable memory at virtual address 00000000 [ 1110.830786] Mem abort info: [ 1110.833573] Exception class = IABT (current EL), IL = 32 bits [ 1110.839494] SET = 0, FnV = 0 [ 1110.842546] EA = 0, S1PTW = 0 [ 1110.845678] user pgtable: 4k pages, 48-bit VAs, pgd = ffff800076386000 [ 1110.852204] [0000000000000000] *pgd=00000000f6322003, *pud=00000000f62de003, *pmd=0000000000000000 [ 1110.861167] Internal error: Oops: 86000004 [#1] PREEMPT SMP [ 1110.866730] Modules linked in: pppoe ppp_async batman_adv ath10k_pci ath10k_core ath pppox ppp_generic nf_conntrack_ipv6 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_FLOWOFFLOAD slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack iptable_mangle iptable_filter ip_tables crc_ccitt compat nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 usb_storage xhci_plat_hcd xhci_pci xhci_hcd dwc3 usbcore usb_common [ 1110.932190] Process swapper/3 (pid: 0, stack limit = 0xffff0000090c8000) [ 1110.938884] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 4.14.162 #0 [ 1110.944965] Hardware name: LS1043A RGW Board (DT) [ 1110.949658] task: ffff8000787a81c0 task.stack: ffff0000090c8000 [ 1110.955568] PC is at 0x0 [ 1110.958097] LR is at call_timer_fn.isra.27+0x24/0x78 [ 1110.963055] pc : [<0000000000000000>] lr : [<ffff0000080ff29c>] pstate: 00400145 [ 1110.970440] sp : ffff00000801be10 [ 1110.973744] x29: ffff00000801be10 x28: ffff000008bf7018 [ 1110.979047] x27: ffff000008bf87c8 x26: ffff000008c160c0 [ 1110.984352] x25: 0000000000000000 x24: 0000000000000000 [ 1110.989657] x23: dead000000000200 x22: 0000000000000000 [ 1110.994959] x21: 0000000000000000 x20: 0000000000000101 [ 1111.000262] x19: ffff8000787a81c0 x18: 0000000000000000 [ 1111.005565] x17: ffff0000089167b0 x16: 0000000000000058 [ 1111.010868] x15: ffff0000089167b0 x14: 0000000000000000 [ 1111.016172] x13: ffff000008916788 x12: 0000000000000040 [ 1111.021475] x11: ffff80007fda9af0 x10: 0000000000000001 [ 1111.026777] x9 : ffff00000801bea0 x8 : 0000000000000004 [ 1111.032080] x7 : 0000000000000000 x6 : ffff80007fda9aa8 [ 1111.037383] x5 : ffff00000801bea0 x4 : 0000000000000010 [ 1111.042685] x3 : ffff00000801be98 x2 : 0000000000000614 [ 1111.047988] x1 : 0000000000000000 x0 : 0000000000000000 [ 1111.053290] Call trace: [ 1111.055728] Exception stack(0xffff00000801bcd0 to 0xffff00000801be10) [ 1111.062158] bcc0: 0000000000000000 0000000000000000 [ 1111.069978] bce0: 0000000000000614 ffff00000801be98 0000000000000010 ffff00000801bea0 [ 1111.077798] bd00: ffff80007fda9aa8 0000000000000000 0000000000000004 ffff00000801bea0 [ 1111.085618] bd20: 0000000000000001 ffff80007fda9af0 0000000000000040 ffff000008916788 [ 1111.093437] bd40: 0000000000000000 ffff0000089167b0 0000000000000058 ffff0000089167b0 [ 1111.101256] bd60: 0000000000000000 ffff8000787a81c0 0000000000000101 0000000000000000 [ 1111.109075] bd80: 0000000000000000 dead000000000200 0000000000000000 0000000000000000 [ 1111.116895] bda0: ffff000008c160c0 ffff000008bf87c8 ffff000008bf7018 ffff00000801be10 [ 1111.124715] bdc0: ffff0000080ff29c ffff00000801be10 0000000000000000 0000000000400145 [ 1111.132534] bde0: ffff8000787a81c0 ffff00000801bde8 0000ffffffffffff 000001029eb19be8 [ 1111.140353] be00: ffff00000801be10 0000000000000000 [ 1111.145220] [< (null)>] (null) [ 1111.149917] [<ffff0000080ff77c>] run_timer_softirq+0x184/0x398 [ 1111.155741] [<ffff000008081938>] __do_softirq+0x100/0x1fc [ 1111.161130] [<ffff0000080a2e28>] irq_exit+0x80/0xd8 [ 1111.166002] [<ffff0000080ea708>] __handle_domain_irq+0x88/0xb0 [ 1111.171825] [<ffff000008081678>] gic_handle_irq+0x68/0xb0 [ 1111.177213] Exception stack(0xffff0000090cbe30 to 0xffff0000090cbf70) [ 1111.183642] be20: 0000000000000020 0000000000000000 [ 1111.191461] be40: 0000000000000001 0000000000000000 00008000771af000 0000000000000000 [ 1111.199281] be60: ffff000008c95180 0000000000000000 ffff000008c19360 ffff0000090cbef0 [ 1111.207101] be80: 0000000000000810 0000000000000400 0000000000000098 ffff000000000000 [ 1111.214920] bea0: 0000000000000001 ffff0000089167b0 0000000000000000 ffff0000089167b0 [ 1111.222740] bec0: 0000000000000000 ffff000008c198e8 ffff000008bf7018 ffff000008c19000 [ 1111.230559] bee0: 0000000000000000 0000000000000000 ffff8000787a81c0 ffff000008018000 [ 1111.238380] bf00: ffff00000801c000 ffff00000913ba34 ffff8000787a81c0 ffff0000090cbf70 [ 1111.246199] bf20: ffff0000080857cc ffff0000090cbf70 ffff0000080857d0 0000000000400145 [ 1111.254020] bf40: ffff000008018000 ffff00000801c000 ffffffffffffffff ffff0000080fa574 [ 1111.261838] bf60: ffff0000090cbf70 ffff0000080857d0 [ 1111.266706] [<ffff0000080832e8>] el1_irq+0xe8/0x18c [ 1111.271576] [<ffff0000080857d0>] arch_cpu_idle+0x10/0x18 [ 1111.276880] [<ffff0000080d7de4>] do_idle+0xec/0x1b8 [ 1111.281748] [<ffff0000080d8020>] cpu_startup_entry+0x20/0x28 [ 1111.287399] [<ffff00000808f81c>] secondary_start_kernel+0x104/0x110 [ 1111.293662] Code: bad PC value [ 1111.296710] ---[ end trace 555b6ca4363c3edd ]--- [ 1111.301318] Kernel panic - not syncing: Fatal exception in interrupt [ 1111.307661] SMP: stopping secondary CPUs [ 1111.311574] Kernel Offset: disabled [ 1111.315053] CPU features: 0x0002000 [ 1111.318530] Memory Limit: none [ 1111.321575] Rebooting in 3 seconds.. With some added debug output / delays we were able to push the crash from the timer callback runner into the callback function and by that shedding some light on which object holding the timer gets corrupted: [ 401.720899] Unable to handle kernel read from unreadable memory at virtual address 00000868 [...] [ 402.335836] [<ffff0000088fafa4>] _raw_spin_lock_bh+0x14/0x48 [ 402.341548] [<ffff000000dbe684>] mesh_path_timer+0x10c/0x248 [mac80211] [ 402.348154] [<ffff0000080ff29c>] call_timer_fn.isra.27+0x24/0x78 [ 402.354150] [<ffff0000080ff77c>] run_timer_softirq+0x184/0x398 [ 402.359974] [<ffff000008081938>] __do_softirq+0x100/0x1fc [ 402.365362] [<ffff0000080a2e28>] irq_exit+0x80/0xd8 [ 402.370231] [<ffff0000080ea708>] __handle_domain_irq+0x88/0xb0 [ 402.376053] [<ffff000008081678>] gic_handle_irq+0x68/0xb0 The issue happens due to the following sequence of events: 1) mesh_path_start_discovery(): -> spin_unlock_bh(&mpath->state_lock) before mesh_path_sel_frame_tx() 2) mesh_path_free_rcu() -> del_timer_sync(&mpath->timer) [...] -> kfree_rcu(mpath) 3) mesh_path_start_discovery(): -> mod_timer(&mpath->timer, ...) [...] -> rcu_read_unlock() 4) mesh_path_free_rcu()'s kfree_rcu(): -> kfree(mpath) 5) mesh_path_timer() starts after timeout, using freed mpath object So a use-after-free issue due to a timer re-arming bug caused by an early spin-unlocking. This patch fixes this issue by re-checking if mpath is about to be free'd and if so bails out of re-arming the timer. Cc: stable@vger.kernel.org Fixes: 050ac52c ("mac80211: code for on-demand Hybrid Wireless Mesh Protocol") Cc: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by:
Linus Lüssing <ll@simonwunderlich.de> Link: https://lore.kernel.org/r/20200522170413.14973-1-linus.luessing@c0d3.blueSigned-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Helge Deller authored
commit bf71bc16 upstream. The Debian kernel v5.6 triggers this kernel panic: Kernel panic - not syncing: Bad Address (null pointer deref?) Bad Address (null pointer deref?): Code=26 (Data memory access rights trap) at addr 0000000000000000 CPU: 0 PID: 0 Comm: swapper Not tainted 5.6.0-2-parisc64 #1 Debian 5.6.14-1 IAOQ[0]: mem_init+0xb0/0x150 IAOQ[1]: mem_init+0xb4/0x150 RP(r2): start_kernel+0x6c8/0x1190 Backtrace: [<0000000040101ab4>] start_kernel+0x6c8/0x1190 [<0000000040108574>] start_parisc+0x158/0x1b8 on a HP-PARISC rp3440 machine with this memory layout: Memory Ranges: 0) Start 0x0000000000000000 End 0x000000003fffffff Size 1024 MB 1) Start 0x0000004040000000 End 0x00000040ffdfffff Size 3070 MB Fix the crash by avoiding virt_to_page() and similar functions in mem_init() until the memory zones have been fully set up. Signed-off-by:
Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # v5.0+ Signed-off-by:
-
Qiushi Wu authored
[ Upstream commit 7cc31613 ] kobject_init_and_add() takes reference even when it fails. Thus, when kobject_init_and_add() returns an error, kobject_put() must be called to properly clean up the kobject. Fixes: d72e31c9 ("iommu: IOMMU Groups") Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit 4377748c ] drivers/hwmon/amd_energy.c:195:15: error: invalid operands to binary expression ('void' and 'int') (channel - data->nr_cpus)); ~~~~~~~~~^~~~~~~~~~~~~~~~~ include/asm-generic/topology.h:51:42: note: expanded from macro 'cpumask_of_node' #define cpumask_of_node(node) ((void)node, cpu_online_mask) ^~~~ include/linux/cpumask.h:618:72: note: expanded from macro 'cpumask_first_and' #define cpumask_first_and(src1p, src2p) cpumask_next_and(-1, (src1p), (src2p)) ^~~~~ Fixes: f0b848ce ("cpumask: Introduce cpumask_of_{node,pcibus} to replace {node,pcibus}_to_cpumask") Fixes: 8abee956 ("hwmon: Add amd_energy driver to report energy counters") Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Link: http://lkml.kernel.org/r/20200527134623.930247-1-arnd@arndb.deSigned-off-by:
-
Alexander Potapenko authored
[ Upstream commit 1d605416 ] KMSAN reported uninitialized data being written to disk when dumping core. As a result, several kilobytes of kmalloc memory may be written to the core file and then read by a non-privileged user. Reported-by:
sam <sunhaoyl@outlook.com> Signed-off-by:
Alexander Potapenko <glider@google.com> Signed-off-by:
Kees Cook <keescook@chromium.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200419100848.63472-1-glider@google.com Link: https://github.com/google/kmsan/issues/76Signed-off-by:
-
Konstantin Khlebnikov authored
[ Upstream commit 6988f31d ] Replace superfluous VM_BUG_ON() with comment about correct usage. Technically reverts commit 1d148e21 ("mm: add VM_BUG_ON_PAGE() to page_mapcount()"), but context lines have changed. Function isolate_migratepages_block() runs some checks out of lru_lock when choose pages for migration. After checking PageLRU() it checks extra page references by comparing page_count() and page_mapcount(). Between these two checks page could be removed from lru, freed and taken by slab. As a result this race triggers VM_BUG_ON(PageSlab()) in page_mapcount(). Race window is tiny. For certain workload this happens around once a year. page:ffffea0105ca9380 count:1 mapcount:0 mapping:ffff88ff7712c180 index:0x0 compound_mapcount: 0 flags: 0x500000000008100(slab|head) raw: 0500000000008100 dead000000000100 dead000000000200 ffff88ff7712c180 raw: 0000000000000000 0000000080200020 00000001ffffffff 0000000000000000 page dumped because: VM_BUG_ON_PAGE(PageSlab(page)) ------------[ cut here ]------------ kernel BUG at ./include/linux/mm.h:628! invalid opcode: 0000 [#1] SMP NOPTI CPU: 77 PID: 504 Comm: kcompactd1 Tainted: G W 4.19.109-27 #1 Hardware name: Yandex T175-N41-Y3N/MY81-EX0-Y3N, BIOS R05 06/20/2019 RIP: 0010:isolate_migratepages_block+0x986/0x9b0 The code in isolate_migratepages_block() was added in commit 119d6d59 ("mm, compaction: avoid isolating pinned pages") before adding VM_BUG_ON into page_mapcount(). This race has been predicted in 2015 by Vlastimil Babka (see link below). [akpm@linux-foundation.org: comment tweaks, per Hugh] Fixes: 1d148e21 ("mm: add VM_BUG_ON_PAGE() to page_mapcount()") Signed-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by:
Hugh Dickins <hughd@google.com> Acked-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by:
Vlastimil Babka <vbabka@suse.cz> Cc: David Rientjes <rientjes@google.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/159032779896.957378.7852761411265662220.stgit@buzz Link: https://lore.kernel.org/lkml/557710E1.6060103@suse.cz/ Link: https://lore.kernel.org/linux-mm/158937872515.474360.5066096871639561424.stgit@buzz/T/ (v1) Signed-off-by:
-
Jerry Lee authored
[ Upstream commit 890bd0f8 ] OSD client should ignore cache/overlay flag if got redirect reply. Otherwise, the client hangs when the cache tier is in forward mode. [ idryomov: Redirects are effectively deprecated and no longer used or tested. The original tiering modes based on redirects are inherently flawed because redirects can race and reorder, potentially resulting in data corruption. The new proxy and readproxy tiering modes should be used instead of forward and readforward. Still marking for stable as obviously correct, though. ] Cc: stable@vger.kernel.org URL: https://tracker.ceph.com/issues/23296 URL: https://tracker.ceph.com/issues/36406Signed-off-by:
Jerry Lee <leisurelysw24@gmail.com> Reviewed-by:
Ilya Dryomov <idryomov@gmail.com> Signed-off-by:
-
Eric W. Biederman authored
[ Upstream commit a4ae32c7 ] An invariant of cap_bprm_set_creds is that every field in the new cred structure that cap_bprm_set_creds might set, needs to be set every time to ensure the fields does not get a stale value. The field cap_ambient is not set every time cap_bprm_set_creds is called, which means that if there is a suid or sgid script with an interpreter that has neither the suid nor the sgid bits set the interpreter should be able to accept ambient credentials. Unfortuantely because cap_ambient is not reset to it's original value the interpreter can not accept ambient credentials. Given that the ambient capability set is expected to be controlled by the caller, I don't think this is particularly serious. But it is definitely worth fixing so the code works correctly. I have tested to verify my reading of the code is correct and the interpreter of a sgid can receive ambient capabilities with this change and cannot receive ambient capabilities without this change. Cc: stable@vger.kernel.org Cc: Andy Lutomirski <luto@kernel.org> Fixes: 58319057 ("capabilities: ambient capabilities") Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Chris Chiu authored
[ Upstream commit 4020d1cc ] The Asus USB DAC is a USB type-C audio dongle for connecting to the headset and headphone. The volume minimum value -23040 which is 0xa600 in hexadecimal with the resolution value 1 indicates this should be endianness issue caused by the firmware bug. Add a volume quirk to fix the volume control problem. Also fixes this warning: Warning! Unlikely big volume range (=23040), cval->res is probably wrong. [5] FU [Headset Capture Volume] ch = 1, val = -23040/0/1 Warning! Unlikely big volume range (=23040), cval->res is probably wrong. [7] FU [Headset Playback Volume] ch = 1, val = -23040/0/1 Signed-off-by:
Chris Chiu <chiu@endlessm.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200526062613.55401-1-chiu@endlessm.comSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Changming Liu authored
[ Upstream commit fb8cd648 ] The "info.index" variable can be 31 in "1 << info.index". This might trigger an undefined behavior since 1 is signed. Fix this by casting 1 to 1u just to be sure "1u << 31" is defined. Signed-off-by:
Changming Liu <liu.changm@northeastern.edu> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/BL0PR06MB4548170B842CB055C9AF695DE5B00@BL0PR06MB4548.namprd06.prod.outlook.comSigned-off-by:
-
Robert Beckett authored
[ Upstream commit 665e7c73 ] Avoid LDB and IPU DI clocks both using the same parent. LDB requires pasthrough clock to avoid breaking timing while IPU DI does not. Force IPU DI clocks to use IMX6QDL_CLK_PLL2_PFD0_352M as parent and LDB to use IMX6QDL_CLK_PLL5_VIDEO_DIV. This fixes an issue where attempting atomic modeset while using HDMI and display port at the same time causes LDB clock programming to destroy the programming of HDMI that was done during the same modeset. Cc: stable@vger.kernel.org Signed-off-by:
Robert Beckett <bob.beckett@collabora.com> [Use IMX6QDL_CLK_PLL2_PFD0_352M instead of IMX6QDL_CLK_PLL2_PFD2_396M originally chosen by Robert Beckett to avoid affecting eMMC clock by DRM atomic updates] Signed-off-by:
Ian Ray <ian.ray@ge.com> [Squash Robert's and Ian's commits for bisectability, update patch description and add stable tag] Signed-off-by:
Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
-
Sebastian Reichel authored
[ Upstream commit e26dead4 ] B850v3, B650v3 and B450v3 all have a GPIO bit banged MDIO bus to communicate with a Marvell switch. On all devices the switch is connected to a PCI based network card, which needs to be referenced by DT, so this also adds the common PCI root node. Signed-off-by:
Sebastian Reichel <sebastian.reichel@collabora.co.uk> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Martyn Welch authored
[ Upstream commit 1d0c7bb2 ] The IPU that drives HDMI must have its pre_sel set to pll2_pfd_396m to avoid stepping on the LVDS output's toes, as the PLL can't be clocked to the pixel clock and to the LVDS serial clock (3.5*pixel clock) at the same time. As we are using ipu1_di0 and ipu2_di0, ensure both are switched to to pll2_pfd2_396m to avoid issues. The LDB driver will switch the required IPU to ldb_di1 when it uses it to drive LVDS. Signed-off-by:
Martyn Welch <martyn.welch@collabora.co.uk> Signed-off-by:
Romain Perier <romain.perier@collabora.com> Reviewed-by:
Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by:
-
Kaike Wan authored
[ Upstream commit a35cd644 ] When kobject_init_and_add() returns an error in the function qib_create_port_files(), the function kobject_put() is not called for the corresponding kobject, which potentially leads to memory leak. This patch fixes the issue by calling kobject_put() even if kobject_init_and_add() fails. In addition, the ppd->diagc_kobj is released along with other kobjects when the sysfs is unregistered. Fixes: f931551b ("IB/qib: Add new qib driver for QLogic PCIe InfiniBand adapters") Link: https://lore.kernel.org/r/20200512031328.189865.48627.stgit@awfm-01.aw.intel.com Cc: <stable@vger.kernel.org> Suggested-by:
Lin Yi <teroincn@gmail.com> Reviewed-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by:
Kaike Wan <kaike.wan@intel.com> Signed-off-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Wei Yongjun authored
[ Upstream commit 5caab2da ] Fix to return a negative error code from the input_register_device() error handling case instead of 0, as done elsewhere in this function. Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Link: https://lore.kernel.org/r/20200428134948.78343-1-weiyongjun1@huawei.com Cc: stable@vger.kernel.org Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Kevin Locke authored
[ Upstream commit 2712c91a ] On the Lenovo ThinkPad Twist S230u (3347-4HU) with BIOS version "GDETC1WW (1.81 ) 06/27/2019", the keyboard, Synaptics TouchPad, and TrackPoint either do not function or stop functioning a few minutes after boot. This problem has been noted before, perhaps only occurring with BIOS 1.57 and later.[1][2][3][4][5] Odds of a BIOS fix appear to be low: 1.57 was released over 6 years ago and although the [BIOS changelog] notes "Fixed an issue of UEFI touchpad/trackpoint/keyboard/touchscreen" in 1.58, it appears to be insufficient. Setting i8042.reset=1 or adding 33474HU to the reset list avoids the issue on my system from either warm or cold boot. [1]: https://bugs.launchpad.net/bugs/1210748 [2]: https://bbs.archlinux.org/viewtopic.php?pid=1360425 [3]: https://forums.linuxmint.com/viewtopic.php?f=46&t=41200 [4]: https://forums.linuxmint.com/viewtopic.php?f=49&t=157115 [5]: https://forums.lenovo.com/topic/findpost/27/1337119 [BIOS changelog]: https://download.lenovo.com/pccbbs/mobiles/gduj33uc.txtSigned-off-by:
Kevin Locke <kevin@kevinlocke.name> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/94f384b0f75f90f71425d7dce7ac82c59ddb87a8.1587702636.git.kevin@kevinlocke.nameSigned-off-by:
-
Łukasz Patron authored
[ Upstream commit 764f7f91 ] Sending [ 0x05, 0x20, 0x00, 0x0f, 0x06 ] packet for Xbox One S controllers fixes an issue where controller is stuck in Bluetooth mode and not sending any inputs. Signed-off-by:
Łukasz Patron <priv.luk@gmail.com> Reviewed-by:
Cameron Gutman <aicommander@gmail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200422075206.18229-1-priv.luk@gmail.comSigned-off-by:
-
