- 17 Jul, 2019 15 commits
-
-
Ido Schimmel authored
The switch periodically sends notifications about learned FDB entries. Among other things, the notification includes the FID (Filtering Identifier) and the port on which the MAC was learned. In case the driver does not have the FID defined on the relevant port, the following error will be periodically generated: mlxsw_spectrum2 0000:06:00.0 swp32: Failed to find a matching {Port, VID} following FDB notification This is not supposed to happen under normal conditions, but can happen if an ingress tc filter with a redirect action is installed on a bridged port. The redirect action will cause the packet's FID to be changed to the dummy FID and a learning notification will be emitted with this FID - which is not defined on the bridged port. Fix this by having the driver ignore learning notifications generated with the dummy FID and delete them from the device. Another option is to chain an ignore action after the redirect action which will cause the device to disable learning, but this means that we need to consume another action whenever a redirect action is used. In addition, the scenario described above is merely a corner case. Fixes: cedbb8b2 ("mlxsw: spectrum_flower: Set dummy FID before forward action") Signed-off-by:Ido Schimmel <idosch@mellanox.com> Reported-by:
Alex Kushnarov <alexanderk@mellanox.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Tested-by:
David S. Miller <davem@davemloft.net>
-
Petr Machata authored
Spectrum systems use DSCP rewrite map to update DSCP field in egressing packets to correspond to priority that the packet has. Whether rewriting will take place is determined at the point when the packet ingresses the switch: if the port is in Trust L3 mode, packet priority is determined from the DSCP map at the port, and DSCP rewrite will happen. If the port is in Trust L2 mode, 802.1p is used for packet prioritization, and no DSCP rewrite will happen. The driver determines the port trust mode based on whether any DSCP prioritization rules are in effect at given port. If there are any, trust level is L3, otherwise it's L2. When the last DSCP rule is removed, the port is switched to trust L2. Under that scenario, if DSCP of a packet should be rewritten, it should be rewritten to 0. However, when switching to Trust L2, the driver neglects to also update the DSCP rewrite map. The last DSCP rule thus remains in effect, and packets egressing through this port, if they have the right priority, will have their DSCP set according to this rule. Fix by first configuring the rewrite map, and only then switching to trust L2 and bailing out. Fixes: b2b1dab6 ("mlxsw: spectrum: Support ieee_setapp, ieee_delapp") Signed-off-by:
Petr Machata <petrm@mellanox.com> Reported-by:
Alex Veber <alexve@mellanox.com> Tested-by:
-
Rosen Penev authored
ag71xx uses devm_ioremap_nocache. This fixes usage of an implicit function Fixes: d51b6ce4 ("net: ethernet: add ag71xx driver") Signed-off-by:
Rosen Penev <rosenp@gmail.com> Signed-off-by:
-
Cong Wang authored
For qdisc's that support TC filters and set TCQ_F_CAN_BYPASS, notably fq_codel, it makes no sense to let packets bypass the TC filters we setup in any scenario, otherwise our packets steering policy could not be enforced. This can be reproduced easily with the following script: ip li add dev dummy0 type dummy ifconfig dummy0 up tc qd add dev dummy0 root fq_codel tc filter add dev dummy0 parent 8001: protocol arp basic action mirred egress redirect dev lo tc filter add dev dummy0 parent 8001: protocol ip basic action mirred egress redirect dev lo ping -I dummy0 192.168.112.1 Without this patch, packets are sent directly to dummy0 without hitting any of the filters. With this patch, packets are redirected to loopback as expected. This fix is not perfect, it only unsets the flag but does not set it back because we have to save the information somewhere in the qdisc if we really want that. Note, both fq_codel and sfq clear this flag in their ->bind_tcf() but this is clearly not sufficient when we don't use any class ID. Fixes: 23624935 ("net_sched: TCQ_F_CAN_BYPASS generalization") Cc: Eric Dumazet <edumazet@google.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
David S. Miller authored
Gerd Rausch says: ==================== net/rds: RDMA fixes A number of net/rds fixes necessary to make "rds_rdma.ko" pass some basic Oracle internal tests. ==================== Signed-off-by: -
Gerd Rausch authored
Otherwise, if an IB connection is torn down before "rds_ib_setup_qp" is called, the value of "ic->i_fastreg_wrs" is still at zero (as it wasn't initialized by "rds_ib_setup_qp"). Consequently "rds_ib_conn_path_shutdown" will spin forever, waiting for it to go back to "RDS_IB_DEFAULT_FR_WR", which of course will never happen as there are no outstanding work requests. Signed-off-by:
Gerd Rausch <gerd.rausch@oracle.com> Acked-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
-
Gerd Rausch authored
Since "rds_ib_free_frmr" and "rds_ib_free_frmr_list" simply put the FRMR memory segments on the "drop_list" or "free_list", and it is the job of "rds_ib_flush_mr_pool" to reap those entries by ultimately issuing a "IB_WR_LOCAL_INV" work-request, we need to trigger and then wait for all those memory segments attached to a particular connection to be fully released before we can move on to release the QP, CQ, etc. So we make "rds_ib_conn_path_shutdown" wait for one more atomic_t called "i_fastreg_inuse_count" that keeps track of how many FRWR memory segments are out there marked "FRMR_IS_INUSE" (and also wake_up rds_ib_ring_empty_wait, as they go away). Signed-off-by:
-
Gerd Rausch authored
Fix a bug where fr_state first goes to FRMR_IS_STALE, because of a failure of operation IB_WR_LOCAL_INV, but then gets set back to "FRMR_IS_FREE" uncoditionally, even though the operation failed. Signed-off-by:
-
Gerd Rausch authored
Make function "rds_ib_try_reuse_ibmr" return NULL in case memory region could not be allocated, since callers simply check if the return value is not NULL. Signed-off-by:
-
Gerd Rausch authored
In order to: 1) avoid a silly bouncing between "clean_list" and "drop_list" triggered by function "rds_ib_reg_frmr" as it is releases frmr regions whose state is not "FRMR_IS_FREE" right away. 2) prevent an invalid access error in a race from a pending "IB_WR_LOCAL_INV" operation with a teardown ("dma_unmap_sg", "put_page") and de-registration ("ib_dereg_mr") of the corresponding memory region. Signed-off-by: -
Gerd Rausch authored
Waiting for activity on the "clean_list" to quiesce is no substitute for proper locking. We can have multiple threads competing for "llist_del_first" via "rds_ib_reuse_mr", and a single thread competing for "llist_del_all" and "llist_del_first" via "rds_ib_flush_mr_pool". Since "llist_del_first" depends on "list->first->next" not to change in the midst of the operation, simply waiting for all current calls to "rds_ib_reuse_mr" to quiesce across all CPUs is woefully inadequate: By the time "wait_clean_list_grace" is done iterating over all CPUs to see that there is no concurrent caller to "rds_ib_reuse_mr", a new caller may have just shown up on the first CPU. Furthermore, <linux/llist.h> explicitly calls out the need for locking: * Cases where locking is needed: * If we have multiple consumers with llist_del_first used in one consumer, * and llist_del_first or llist_del_all used in other consumers, * then a lock is needed. Also, while at it, drop the unused "pool" parameter from "list_to_llist_nodes". Signed-off-by:
-
Gerd Rausch authored
In the context of FRMR (ib_frmr.c): Memory regions make it onto the "clean_list" via "rds_ib_flush_mr_pool", after the memory region has been posted for invalidation via "rds_ib_post_inv". At that point in time, "fr_state" may still be in state "FRMR_IS_INUSE", since the only place where "fr_state" transitions to "FRMR_IS_FREE" is in "rds_ib_mr_cqe_handler", which is triggered by a tasklet. So in case we notice that "fr_state != FRMR_IS_FREE" (see below), we wait for "fr_inv_done" to trigger with a maximum of 10msec. Then we check again, and only put the memory region onto the drop_list (via "rds_ib_free_frmr") in case the situation remains unchanged. This avoids the problem of memory-regions bouncing between "clean_list" and "drop_list" before they even have a chance to be properly invalidated. Signed-off-by:
-
YueHaibing authored
If NF_NAT is m and NET_ACT_CT is y, build fails: net/sched/act_ct.o: In function `tcf_ct_act': act_ct.c:(.text+0x21ac): undefined reference to `nf_ct_nat_ext_add' act_ct.c:(.text+0x229a): undefined reference to `nf_nat_icmp_reply_translation' act_ct.c:(.text+0x233a): undefined reference to `nf_nat_setup_info' act_ct.c:(.text+0x234a): undefined reference to `nf_nat_alloc_null_binding' act_ct.c:(.text+0x237c): undefined reference to `nf_nat_packet' Reported-by:
Hulk Robot <hulkci@huawei.com> Fixes: b57dc7c1 ("net/sched: Introduce action ct") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
Hariprasad Kelam authored
This patch removes NULL checks before calling kfree. fixes below issues reported by coccicheck net/sctp/sm_make_chunk.c:2586:3-8: WARNING: NULL check before some freeing functions is not needed. net/sctp/sm_make_chunk.c:2652:3-8: WARNING: NULL check before some freeing functions is not needed. net/sctp/sm_make_chunk.c:2667:3-8: WARNING: NULL check before some freeing functions is not needed. net/sctp/sm_make_chunk.c:2684:3-8: WARNING: NULL check before some freeing functions is not needed. Signed-off-by:
Hariprasad Kelam <hariprasad.kelam@gmail.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
Taehee Yoo authored
cfhsi_exit_module() calls unregister_netdev() under rtnl_lock(). but unregister_netdev() internally calls rtnl_lock(). So deadlock would occur. Fixes: c4125400 ("caif-hsi: Add rtnl support") Signed-off-by:
Taehee Yoo <ap420073@gmail.com> Signed-off-by:
-
- 16 Jul, 2019 7 commits
-
-
Vedang Patel authored
During the review of the iproute2 patches for txtime-assist mode, it was pointed out that it does not make sense for the txtime-delay parameter to be negative. So, change the type of the parameter from s32 to u32. Fixes: 4cfd5779 ("taprio: Add support for txtime-assist mode") Reported-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
Vedang Patel <vedang.patel@intel.com> Signed-off-by:
-
Qian Cai authored
The commit 6413139d ("skbuff: increase verbosity when dumping skb data") introduced a few compilation warnings. net/core/skbuff.c:766:32: warning: format specifies type 'unsigned short' but the argument has type 'unsigned int' [-Wformat] level, sk->sk_family, sk->sk_type, sk->sk_protocol); ^~~~~~~~~~~ net/core/skbuff.c:766:45: warning: format specifies type 'unsigned short' but the argument has type 'unsigned int' [-Wformat] level, sk->sk_family, sk->sk_type, sk->sk_protocol); ^~~~~~~~~~~~~~~ Fix them by using the proper types. Fixes: 6413139d ("skbuff: increase verbosity when dumping skb data") Signed-off-by:
Qian Cai <cai@lca.pw> Reviewed-by:
Nathan Chancellor <natechancellor@gmail.com> Acked-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Benjamin Poirier authored
While changing the number of interrupt channels, be2net stops adapter operation (including netif_tx_disable()) but it doesn't signal that it cannot transmit. This may lead dev_watchdog() to falsely trigger during that time. Add the missing call to netif_carrier_off(), following the pattern used in many other drivers. netif_carrier_on() is already taken care of in be_open(). Signed-off-by:
Benjamin Poirier <bpoirier@suse.com> Signed-off-by:
-
Nishka Dasgupta authored
Each iteration of for_each_child_of_node puts the previous node, but in the case of a goto from the middle of the loop, there is no put, thus causing a memory leak. Hence add an of_node_put before the goto. Issue found with Coccinelle. Signed-off-by:
Nishka Dasgupta <nishkadg.linux@gmail.com> Signed-off-by:
-
Nishka Dasgupta authored
Each iteration of for_each_available_child_of_node puts the previous node, but in the case of a return from the middle of the loop, there is no put, thus causing a memory leak. Hence add an of_node_put before the return in two places. Issue found with Coccinelle. Signed-off-by:
-
Nishka Dasgupta authored
Each iteration of for_each_available_child_of_node puts the previous node, but in the case of a return or break from the middle of the loop, there is no put, thus causing a memory leak. Hence, for function cpsw_probe_dt, create an extra label err_node_put that puts the last used node and returns ret; modify the return statements in the loop to save the return value in ret and goto this new label. For function cpsw_remove_dt, add an of_node_put before the break. Issue found with Coccinelle. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mameed says: ==================== Mellanox, mlx5 fixes 2019-07-15 This pull request provides mlx5 TC flower and tunnel fixes for kernel 5.2 from Eli and Vlad. ==================== Signed-off-by:
-
- 15 Jul, 2019 9 commits
-
-
Vlad Buslov authored
Recently, fl_flow_key->indev_ifindex int field was refactored into flow_dissector_key_meta field. With this, flower classifier also sets FLOW_DISSECTOR_KEY_META flow dissector key. However, mlx5 flower dissector validation code rejects filters that use flow dissector keys that are not supported. Add FLOW_DISSECTOR_KEY_META to the list of allowed dissector keys in __parse_cls_flower() to prevent following error when offloading flower classifier to mlx5: Error: mlx5_core: Unsupported key. Fixes: 8212ed77 ("net: sched: cls_flower: use flow_dissector for ingress ifindex") Signed-off-by:
Vlad Buslov <vladbu@mellanox.com> Reviewed-by:
Roi Dayan <roid@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com>
-
Vlad Buslov authored
Currently, tunnel attributes are parsed and inner header matching is used only when flow dissector specifies match on some of the supported encapsulation fields. When user tries to offload tc filter that doesn't match any encapsulation fields on tunnel device, mlx5 tc layer incorrectly sets to match packet header keys on encap header (outer header) and firmware rejects the rule with syndrome 0x7e1579 when creating new flow group. Change __parse_cls_flower() to determine whether tunnel is used based on fitler_dev tunnel info, instead of determining it indirectly by checking flow dissector enc keys. Fixes: bbd00f7e ("net/mlx5e: Add TC tunnel release action for SRIOV offloads") Signed-off-by:
-
Eli Cohen authored
When mlx5e_attach_encap() calls mlx5e_get_tc_tun() to get the tunnel info data struct, check that returned value is not NULL, as would be in the case of unsupported encapsulation. Fixes: d386939a ("net/mlx5e: Rearrange tc tunnel code in a modular way") Signed-off-by:
Eli Cohen <eli@mellanox.com> Reviewed-by:
-
Phong Tran authored
The syzbot test with random endpoint address which made the idx is overflow in the table of endpoint configuations. this adds the checking for fixing the error report from syzbot KASAN: stack-out-of-bounds Read in hfcsusb_probe [1] The patch tested by syzbot [2] Reported-by: syzbot+8750abbc3a46ef47d509@syzkaller.appspotmail.com [1]: https://syzkaller.appspot.com/bug?id=30a04378dac680c5d521304a00a86156bb913522 [2]: https://groups.google.com/d/msg/syzkaller-bugs/_6HBdge8F3E/OJn7wVNpBAAJSigned-off-by:
Phong Tran <tranmanphong@gmail.com> Signed-off-by:
-
Fuqian Huang authored
In commit 518a2f19 ("dma-mapping: zero memory returned from dma_alloc_*"), dma_alloc_coherent has already zeroed the memory. So memset is not needed. Signed-off-by:
Fuqian Huang <huangfq.daxian@gmail.com> Signed-off-by:
-
Fuqian Huang authored
pci_alloc_consistent calls dma_alloc_coherent directly. In commit 518a2f19 ("dma-mapping: zero memory returned from dma_alloc_*"), dma_alloc_coherent has already zeroed the memory. So memset is not needed. Signed-off-by:
-
Fuqian Huang authored
kvzalloc already zeroes the memory during the allocation. pci_alloc_consistent calls dma_alloc_coherent directly. In commit 518a2f19 ("dma-mapping: zero memory returned from dma_alloc_*"), dma_alloc_coherent has already zeroed the memory. So the memset after these function is not needed. Signed-off-by:
-
Fuqian Huang authored
In commit 518a2f19 ("dma-mapping: zero memory returned from dma_alloc_*"), dma_alloc_coherent has already zeroed the memory. So memset is not needed. Signed-off-by:
-
Lorenzo Bianconi authored
Neigh timer can be scheduled multiple times from userspace adding multiple neigh entries and forcing the neigh timer scheduling passing NTF_USE in the netlink requests. This will result in a refcount leak and in the following dump stack: [ 32.465295] NEIGH: BUG, double timer add, state is 8 [ 32.465308] CPU: 0 PID: 416 Comm: double_timer_ad Not tainted 5.2.0+ #65 [ 32.465311] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.12.0-2.fc30 04/01/2014 [ 32.465313] Call Trace: [ 32.465318] dump_stack+0x7c/0xc0 [ 32.465323] __neigh_event_send+0x20c/0x880 [ 32.465326] ? ___neigh_create+0x846/0xfb0 [ 32.465329] ? neigh_lookup+0x2a9/0x410 [ 32.465332] ? neightbl_fill_info.constprop.0+0x800/0x800 [ 32.465334] neigh_add+0x4f8/0x5e0 [ 32.465337] ? neigh_xmit+0x620/0x620 [ 32.465341] ? find_held_lock+0x85/0xa0 [ 32.465345] rtnetlink_rcv_msg+0x204/0x570 [ 32.465348] ? rtnl_dellink+0x450/0x450 [ 32.465351] ? mark_held_locks+0x90/0x90 [ 32.465354] ? match_held_lock+0x1b/0x230 [ 32.465357] netlink_rcv_skb+0xc4/0x1d0 [ 32.465360] ? rtnl_dellink+0x450/0x450 [ 32.465363] ? netlink_ack+0x420/0x420 [ 32.465366] ? netlink_deliver_tap+0x115/0x560 [ 32.465369] ? __alloc_skb+0xc9/0x2f0 [ 32.465372] netlink_unicast+0x270/0x330 [ 32.465375] ? netlink_attachskb+0x2f0/0x2f0 [ 32.465378] netlink_sendmsg+0x34f/0x5a0 [ 32.465381] ? netlink_unicast+0x330/0x330 [ 32.465385] ? move_addr_to_kernel.part.0+0x20/0x20 [ 32.465388] ? netlink_unicast+0x330/0x330 [ 32.465391] sock_sendmsg+0x91/0xa0 [ 32.465394] ___sys_sendmsg+0x407/0x480 [ 32.465397] ? copy_msghdr_from_user+0x200/0x200 [ 32.465401] ? _raw_spin_unlock_irqrestore+0x37/0x40 [ 32.465404] ? lockdep_hardirqs_on+0x17d/0x250 [ 32.465407] ? __wake_up_common_lock+0xcb/0x110 [ 32.465410] ? __wake_up_common+0x230/0x230 [ 32.465413] ? netlink_bind+0x3e1/0x490 [ 32.465416] ? netlink_setsockopt+0x540/0x540 [ 32.465420] ? __fget_light+0x9c/0xf0 [ 32.465423] ? sockfd_lookup_light+0x8c/0xb0 [ 32.465426] __sys_sendmsg+0xa5/0x110 [ 32.465429] ? __ia32_sys_shutdown+0x30/0x30 [ 32.465432] ? __fd_install+0xe1/0x2c0 [ 32.465435] ? lockdep_hardirqs_off+0xb5/0x100 [ 32.465438] ? mark_held_locks+0x24/0x90 [ 32.465441] ? do_syscall_64+0xf/0x270 [ 32.465444] do_syscall_64+0x63/0x270 [ 32.465448] entry_SYSCALL_64_after_hwframe+0x49/0xbe Fix the issue unscheduling neigh_timer if selected entry is in 'IN_TIMER' receiving a netlink request with NTF_USE flag set Reported-by:
Marek Majkowski <marek@cloudflare.com> Fixes: 0c5c2d30 ("neigh: Allow for user space users of the neighbour table") Signed-off-by:
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Reviewed-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
- 14 Jul, 2019 6 commits
-
-
Tasos Sahanidis authored
The onboard sky2 NICs send IRQs after S3, resulting in ethernet not working after resume. Maskable MSI and MSI-X are also not supported, so fall back to INTx. Signed-off-by:
Tasos Sahanidis <tasos@tasossah.com> Signed-off-by:
-
Sergej Benilov authored
Correct a few typos in comments and debug text. Signed-off-by:
Sergej Benilov <sergej.benilov@googlemail.com> Signed-off-by:
-
Haishuang Yan authored
Same as other ip tunnel, use dst_cache in xmit action to avoid unnecessary fib lookups. Signed-off-by:
Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by:
-
Denis Efremov authored
The function gve_probe is declared static and marked EXPORT_SYMBOL, which is at best an odd combination. Because the function is not used outside of the drivers/net/ethernet/google/gve/gve_main.c file it is defined in, this commit removes the EXPORT_SYMBOL() marking. Signed-off-by:
Denis Efremov <efremov@linux.com> Signed-off-by:
-
Vincent Bernat authored
Ability to tweak the interval between peer notifications has been added in 07a4ddec ("bonding: add an option to specify a delay between peer notifications") but the documentation was not updated. Signed-off-by:
Vincent Bernat <vincent@bernat.ch> Signed-off-by:
-
Heiner Kallweit authored
On RTL8411b the RX unit gets confused if the PHY is powered-down. This was reported in [0] and confirmed by Realtek. Realtek provided a sequence to fix the RX unit after PHY wakeup. The issue itself seems to have been there longer, the Fixes tag refers to where the fix applies properly. [0] https://bugzilla.redhat.com/show_bug.cgi?id=1692075 Fixes: a99790bf ("r8169: Reinstate ASPM Support") Tested-by:
Ionut Radu <ionut.radu@gmail.com> Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
- 13 Jul, 2019 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc updates from Michael Ellerman: "Notable changes: - Removal of the NPU DMA code, used by the out-of-tree Nvidia driver, as well as some other functions only used by drivers that haven't (yet?) made it upstream. - A fix for a bug in our handling of hardware watchpoints (eg. perf record -e mem: ...) which could lead to register corruption and kernel crashes. - Enable HAVE_ARCH_HUGE_VMAP, which allows us to use large pages for vmalloc when using the Radix MMU. - A large but incremental rewrite of our exception handling code to use gas macros rather than multiple levels of nested CPP macros. And the usual small fixes, cleanups and improvements. Thanks to: Alastair D'Silva, Alexey Kardashevskiy, Andreas Schwab, Aneesh Kumar K.V, Anju T Sudhakar, Anton Blanchard, Arnd Bergmann, Athira Rajeev, Cédric Le Goater, Christian Lamparter, Christophe Leroy, Christophe Lombard, Christoph Hellwig, Daniel Axtens, Denis Efremov, Enrico Weigelt, Frederic Barrat, Gautham R. Shenoy, Geert Uytterhoeven, Geliang Tang, Gen Zhang, Greg Kroah-Hartman, Greg Kurz, Gustavo Romero, Krzysztof Kozlowski, Madhavan Srinivasan, Masahiro Yamada, Mathieu Malaterre, Michael Neuling, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Nishad Kamdar, Oliver O'Halloran, Qian Cai, Ravi Bangoria, Sachin Sant, Sam Bobroff, Satheesh Rajendran, Segher Boessenkool, Shaokun Zhang, Shawn Anastasio, Stewart Smith, Suraj Jitindar Singh, Thiago Jung Bauermann, YueHaibing" * tag 'powerpc-5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (163 commits) powerpc/powernv/idle: Fix restore of SPRN_LDBAR for POWER9 stop state. powerpc/eeh: Handle hugepages in ioremap space ocxl: Update for AFU descriptor template version 1.1 powerpc/boot: pass CONFIG options in a simpler and more robust way powerpc/boot: add {get, put}_unaligned_be32 to xz_config.h powerpc/irq: Don't WARN continuously in arch_local_irq_restore() powerpc/module64: Use symbolic instructions names. powerpc/module32: Use symbolic instructions names. powerpc: Move PPC_HA() PPC_HI() and PPC_LO() to ppc-opcode.h powerpc/module64: Fix comment in R_PPC64_ENTRY handling powerpc/boot: Add lzo support for uImage powerpc/boot: Add lzma support for uImage powerpc/boot: don't force gzipped uImage powerpc/8xx: Add microcode patch to move SMC parameter RAM. powerpc/8xx: Use IO accessors in microcode programming. powerpc/8xx: replace #ifdefs by IS_ENABLED() in microcode.c powerpc/8xx: refactor programming of microcode CPM params. powerpc/8xx: refactor printing of microcode patch name. powerpc/8xx: Refactor microcode write powerpc/8xx: refactor writing of CPM microcode arrays ... -
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds authored
Pull sparc updates from David Miller: "Just a few small changes: - Fix console naming inconsistency with hypervisor consoles, from John Paul Adrian Glaubitz - Fix userland compilation due to use of u_int, from Masahiro Yamada" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc64: Add missing newline at end of file sparc: fix unknown type name u_int in uapi header sparc: configs: Remove useless UEVENT_HELPER_PATH sparc: Remove redundant copy of the LGPL-2.0 sunhv: Fix device naming inconsistency between sunhv_console and sunhv_reg -
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix excessive stack usage in cxgb4, from Arnd Bergmann. 2) Missing skb queue lock init in tipc, from Chris Packham. 3) Fix some regressions in ipv6 flow label handling, from Eric Dumazet. 4) Elide flow dissection of local packets in FIB rules, from Petar Penkov. 5) Fix TLS support build failure in mlx5, from Tariq Toukab. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (36 commits) ppp: mppe: Revert "ppp: mppe: Add softdep to arc4" net: dsa: qca8k: replace legacy gpio include net: hisilicon: Use devm_platform_ioremap_resource cxgb4: reduce kernel stack usage in cudbg_collect_mem_region() tipc: ensure head->lock is initialised tc-tests: updated skbedit tests nfp: flower: ensure ip protocol is specified for L4 matches nfp: flower: fix ethernet check on match fields net/mlx5e: Provide cb_list pointer when setting up tc block on rep net: phy: make exported variables non-static net: sched: Fix NULL-pointer dereference in tc_indr_block_ing_cmd() davinci_cpdma: don't cast dma_addr_t to pointer net: openvswitch: do not update max_headroom if new headroom is equal to old headroom net/mlx5e: Convert single case statement switch statements into if statements net/mlx5: E-Switch, Reduce ingress acl modify metadata stack usage net/mlx5e: Fix unused variable warning when CONFIG_MLX5_ESWITCH is off net/mlx5e: Fix compilation error in TLS code ipv6: fix static key imbalance in fl_create() ipv6: fix potential crash in ip6_datagram_dst_update() ipv6: tcp: fix flowlabels reflection for RST packets ...
-
