- 14 Aug, 2018 40 commits
-
-
Keith Busch authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit 15bfd21f upstream. A device may have boundary restrictions where the number of sectors between boundaries exceeds its max transfer size. In this case, we need to cap the max size to the smaller of the two limits. Reported-by:
Jitendra Bhivare <jitendra.bhivare@broadcom.com> Tested-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Keith Busch <keith.busch@intel.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com>
-
Maxime Chevallier authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit ce99319a upstream. When SPI transfers can be offloaded using DMA, the SPI core need to build a scatterlist to make sure that the buffer to be transferred is dma-able. This patch fixes the scatterlist entry size computation in the case where the maximum acceptable scatterlist entry supported by the DMA controller is less than PAGE_SIZE, when the buffer is vmalloced. For each entry, the actual size is given by the minimum between the desc_len (which is the max buffer size supported by the DMA controller) and the remaining buffer length until we cross a page boundary. Fixes: 65598c13 ("spi: Fix per-page mapping of unaligned vmalloc-ed buffer") Signed-off-by:
Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Signed-off-by:
Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by:
-
Liu Bo authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit 58113753 upstream. Fstests generic/475 provides a way to fail metadata reads while checking if checksum exists for the inode inside run_delalloc_nocow(), and csum_exist_in_range() interprets error (-EIO) as inode having checksum and makes its caller enter the cow path. In case of free space inode, this ends up with a warning in cow_file_range(). The same problem applies to btrfs_cross_ref_exist() since it may also read metadata in between. With this, run_delalloc_nocow() bails out when errors occur at the two places. cc: <stable@vger.kernel.org> v2.6.28+ Fixes: 17d217fe ("Btrfs: fix nodatasum handling in balancing code") Signed-off-by:
Liu Bo <bo.li.liu@oracle.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Takashi Iwai authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit 275ec0cb upstream. Fujitsu Seimens ESPRIMO Mobile U9210 requires the same fixup as H270 for the correct pin configs. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200107 Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
??? authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit e0ae2519 upstream. Some touchpad has middle key and it will be indicated in bit 2 of packet[0]. We need to fix V4 formation's byte mask to prevent error decoding. Signed-off-by:
KT Liao <kt.liao@emc.com.tw> Cc: stable@vger.kernel.org Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Aaron Ma authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit 24bb555e upstream. PNPID is better way to identify the type of touchpads. Enable middle button support on 2 types of touchpads on Lenovo P52. Cc: stable@vger.kernel.org Signed-off-by:
Aaron Ma <aaron.ma@canonical.com> Reviewed-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
-
Ben Hutchings authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit 50fc7b61 upstream. Commit 40f7090b ("Input: elan_i2c_smbus - fix corrupted stack") fixed most of the functions using i2c_smbus_read_block_data() to allocate a buffer with the maximum block size. However three functions were left unchanged: * In elan_smbus_initialize(), increase the buffer size in the same way. * In elan_smbus_calibrate_result(), the buffer is provided by the caller (calibrate_store()), so introduce a bounce buffer. Also name the result buffer size. * In elan_smbus_get_report(), the buffer is provided by the caller but happens to be the right length. Add a compile-time assertion to ensure this remains the case. Cc: <stable@vger.kernel.org> # 3.19+ Signed-off-by:
Ben Hutchings <ben.hutchings@codethink.co.uk> Reviewed-by:
-
Jan Kara authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit fa65653e upstream. Detect when a directory entry is (possibly partially) beyond directory size and return EIO in that case since it means the filesystem is corrupted. Otherwise directory operations can further corrupt the directory and possibly also oops the kernel. CC: Anatoly Trosinenko <anatoly.trosinenko@gmail.com> CC: stable@vger.kernel.org Reported-and-tested-by:
Anatoly Trosinenko <anatoly.trosinenko@gmail.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Boris Ostrovsky authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit eef04c7b upstream. Commit 910f8bef ("xen/pirq: fix error path cleanup when binding MSIs") fixed a couple of errors in error cleanup path of xen_bind_pirq_msi_to_irq(). This cleanup allowed a call to __unbind_from_irq() with an unbound irq, which would result in triggering the BUG_ON there. Since there is really no reason for the BUG_ON (xen_free_irq() can operate on unbound irqs) we can remove it. Reported-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: stable@vger.kernel.org Reviewed-by:
Juergen Gross <jgross@suse.com> Signed-off-by:
-
Alexandr Savca authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit 8938fc7b upstream. Add ELAN0618 to the list of supported touchpads; this ID is used in Lenovo v330 15IKB devices. Signed-off-by:
Alexandr Savca <alexandr.savca@saltedge.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Kees Cook authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit 9f645bcc upstream. cmap->len can get close to INT_MAX/2, allowing for an integer overflow in allocation. This uses kmalloc_array() instead to catch the condition. Reported-by:
Dr Silvio Cesare of InfoSect <silvio.cesare@gmail.com> Fixes: 8bdb3a2d ("uvesafb: the driver core") Cc: stable@vger.kernel.org Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Dave Wysochanski authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit d6889480 upstream. In nfs_idmap_read_and_verify_message there is an incorrect sprintf '%d' that converts the __u32 'im_id' from struct idmap_msg to 'id_str', which is a stack char array variable of length NFS_UINT_MAXLEN == 11. If a uid or gid value is > 2147483647 = 0x7fffffff, the conversion overflows into a negative value, for example: crash> p (unsigned) (0x80000000) $1 = 2147483648 crash> p (signed) (0x80000000) $2 = -2147483648 The '-' sign is written to the buffer and this causes a 1 byte overflow when the NULL byte is written, which corrupts kernel stack memory. If CONFIG_CC_STACKPROTECTOR_STRONG is set we see a stack-protector panic: [11558053.616565] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: ffffffffa05b8a8c [11558053.639063] CPU: 6 PID: 9423 Comm: rpc.idmapd Tainted: G W ------------ T 3.10.0-514.el7.x86_64 #1 [11558053.641990] Hardware name: Red Hat OpenStack Compute, BIOS 1.10.2-3.el7_4.1 04/01/2014 [11558053.644462] ffffffff818c7bc0 00000000b1f3aec1 ffff880de0f9bd48 ffffffff81685eac [11558053.646430] ffff880de0f9bdc8 ffffffff8167f2b3 ffffffff00000010 ffff880de0f9bdd8 [11558053.648313] ffff880de0f9bd78 00000000b1f3aec1 ffffffff811dcb03 ffffffffa05b8a8c [11558053.650107] Call Trace: [11558053.651347] [<ffffffff81685eac>] dump_stack+0x19/0x1b [11558053.653013] [<ffffffff8167f2b3>] panic+0xe3/0x1f2 [11558053.666240] [<ffffffff811dcb03>] ? kfree+0x103/0x140 [11558053.682589] [<ffffffffa05b8a8c>] ? idmap_pipe_downcall+0x1cc/0x1e0 [nfsv4] [11558053.689710] [<ffffffff810855db>] __stack_chk_fail+0x1b/0x30 [11558053.691619] [<ffffffffa05b8a8c>] idmap_pipe_downcall+0x1cc/0x1e0 [nfsv4] [11558053.693867] [<ffffffffa00209d6>] rpc_pipe_write+0x56/0x70 [sunrpc] [11558053.695763] [<ffffffff811fe12d>] vfs_write+0xbd/0x1e0 [11558053.702236] [<ffffffff810acccc>] ? task_work_run+0xac/0xe0 [11558053.704215] [<ffffffff811fec4f>] SyS_write+0x7f/0xe0 [11558053.709674] [<ffffffff816964c9>] system_call_fastpath+0x16/0x1b Fix this by calling the internally defined nfs_map_numeric_to_string() function which properly uses '%u' to convert this __u32. For consistency, also replace the one other place where snprintf is called. Signed-off-by:
Dave Wysochanski <dwysocha@redhat.com> Reported-by:
Stephen Johnston <sjohnsto@redhat.com> Fixes: cf4ab538 ("NFSv4: Fix the string length returned by the idmapper") Cc: stable@vger.kernel.org # v3.4+ Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by:
-
Scott Mayhew authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit 9c2ece6e upstream. nfsd4_readdir_rsize restricts rd_maxcount to svc_max_payload when estimating the size of the readdir reply, but nfsd_encode_readdir restricts it to INT_MAX when encoding the reply. This can result in log messages like "kernel: RPC request reserved 32896 but used 1049444". Restrict rd_dircount similarly (no reason it should be larger than svc_max_payload). Signed-off-by:
Scott Mayhew <smayhew@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit 76d81243 upstream. As warned by smatch: drivers/media/dvb-core/dvb_frontend.c:314 dvb_frontend_get_event() warn: inconsistent returns 'sem:&fepriv->sem'. Locked on: line 288 line 295 line 306 line 314 Unlocked on: line 303 The lock implementation for get event is wrong, as, if an interrupt occurs, down_interruptible() will fail, and the routine will call up() twice when userspace calls the ioctl again. The bad code is there since when Linux migrated to git, in 2005. Cc: stable@vger.kernel.org Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
Kai-Heng Feng authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit 29e61d6e upstream. User reports AverMedia DVD EZMaker 7 can be driven by VIDEO_GRABBER. Add the device to the id_table to make it work. BugLink: https://bugs.launchpad.net/bugs/1620762 Cc: stable@vger.kernel.org Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
Hans Verkuil <hansverk@cisco.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit ea72fbf5 upstream. As warned by smatch: drivers/media/v4l2-core/v4l2-compat-ioctl32.c:879 put_v4l2_ext_controls32() warn: check for integer overflow 'count' The access_ok() logic should check for too big arrays too. Cc: stable@vger.kernel.org Signed-off-by:
-
Adrian Hunter authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit 621a5a32 upstream. Use a 64-bit type so that the cycle count is not limited to 32-bits. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1528371002-8862-1-git-send-email-adrian.hunter@intel.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Adrian Hunter authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit 9fb52336 upstream. Some Atom CPUs can produce FUP packets that contain NLIP (next linear instruction pointer) instead of CLIP (current linear instruction pointer). That will result in "Unexpected indirect branch" errors. Fix by comparing IP to NLIP in that case. Signed-off-by:
-
Adrian Hunter authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit dd27b87a upstream. On some platforms, overflows will clear before MTC wraparound, and there is no following TSC/TMA packet. In that case the previous TMA is valid. Since there will be a valid TMA either way, stop setting 'have_tma' to false upon overflow. Signed-off-by:
-
Adrian Hunter authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit bd2e49ec upstream. It is possible to have a CBR packet between a FUP packet and corresponding TIP packet. Stop treating it as an error. Signed-off-by:
-
Adrian Hunter authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit dbcb82b9 upstream. sync_switch is a facility to synchronize decoding more closely with the point in the kernel when the context actually switched. In one case, INTEL_PT_SS_NOT_TRACING state was not correctly transitioning to INTEL_PT_SS_TRACING state due to a missing case clause. Add it. Signed-off-by:
-
Adrian Hunter authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit aef4feac upstream. Fix __kmod_path__parse() so that perf tools does not treat vdso32 and vdsox32 as kernel modules and fail to find the object. Signed-off-by:
-
Andy Shevchenko authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit d28b6252 upstream. According to documentation REMAP register has to be programmed in either DMA or PIO mode of the slice. Move the DMA capability check below to let REMAP register be programmed in PIO mode. Cc: stable@vger.kernel.org # 4.3+ Fixes: 4b45efe8 ("mfd: Add support for Intel Sunrisepoint LPSS devices") Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Johan Hovold authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit 2b12dfa1 upstream. Fix child-node lookup during probe, which ended up searching the whole device tree depth-first starting at the parent rather than just matching on its children. This would only cause trouble if the child node is missing while there is an unrelated node named "backlight" elsewhere in the tree. Cc: stable <stable@vger.kernel.org> # 3.7 Fixes: eebfdc17 ("backlight: Add TPS65217 WLED driver") Signed-off-by:
Johan Hovold <johan@kernel.org> Acked-by:
Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by:
-
Johan Hovold authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit d1cc0ec3 upstream. Fix child-node lookup during probe, which ended up searching the whole device tree depth-first starting at the parent rather than just matching on its children. To make things worse, the parent mfd node was also prematurely freed, while the child backlight node was leaked. Cc: stable <stable@vger.kernel.org> # 3.9 Fixes: 47ec340c ("mfd: max8925: Support dt for backlight") Signed-off-by:
-
Johan Hovold authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit 4a9c8bb2 upstream. Fix child-node lookup during probe, which ended up searching the whole device tree depth-first starting at the parent rather than just matching on its children. To make things worse, the parent mfd node was also prematurely freed. Cc: stable <stable@vger.kernel.org> # 3.10 Fixes: 59eb2b5e ("drivers/video/backlight/as3711_bl.c: add OF support") Signed-off-by:
-
Florian Westphal authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit 862591bf upstream. syzkaller triggered following KASAN splat: BUG: KASAN: slab-out-of-bounds in xfrm_hash_rebuild+0xdbe/0xf00 net/xfrm/xfrm_policy.c:618 read of size 2 at addr ffff8801c8e92fe4 by task kworker/1:1/23 [..] Workqueue: events xfrm_hash_rebuild [..] __asan_report_load2_noabort+0x14/0x20 mm/kasan/report.c:428 xfrm_hash_rebuild+0xdbe/0xf00 net/xfrm/xfrm_policy.c:618 process_one_work+0xbbf/0x1b10 kernel/workqueue.c:2112 worker_thread+0x223/0x1990 kernel/workqueue.c:2246 [..] The reproducer triggers: 1016 if (error) { 1017 list_move_tail(&walk->walk.all, &x->all); 1018 goto out; 1019 } in xfrm_policy_walk() via pfkey (it sets tiny rcv space, dump callback returns -ENOBUFS). In this case, *walk is located the pfkey socket struct, so this socket becomes visible in the global policy list. It looks like this is intentional -- phony walker has walk.dead set to 1 and all other places skip such "policies". Ccing original authors of the two commits that seem to expose this issue (first patch missed ->dead check, second patch adds pfkey sockets to policies dumper list). Fixes: 880a6fab ("xfrm: configure policy hash table thresholds by netlink") Fixes: 12a169e7 ("ipsec: Put dumpers on the dump list") Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Timo Teras <timo.teras@iki.fi> Cc: Christophe Gouault <christophe.gouault@6wind.com> Reported-by:
syzbot <bot+c028095236fcb6f4348811565b75084c754dc729@syzkaller.appspotmail.com> Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Cc: Zubin Mithra <zsm@chromium.org> Signed-off-by:
-
Silvio Cesare authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit 353748a3 upstream. There is potential for the size and len fields in ubifs_data_node to be too large causing either a negative value for the length fields or an integer overflow leading to an incorrect memory allocation. Likewise, when the len field is small, an integer underflow may occur. Signed-off-by:
-
Richard Weinberger authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit 6e7d8016 upstream. Ben Hutchings pointed out that 29b7a6fa ("ubi: fastmap: Don't flush fastmap work on detach") does not really fix the problem, it just reduces the risk to hit the race window where fastmap work races against free()'ing ubi->volumes[]. The correct approach is making sure that no more fastmap work is in progress before we free ubi data structures. So we cancel fastmap work right after the ubi background thread is stopped. By setting ubi->thread_enabled to zero we make sure that no further work tries to wake the thread. Fixes: 29b7a6fa ("ubi: fastmap: Don't flush fastmap work on detach") Fixes: 74cdaf24 ("UBI: Fastmap: Fix memory leaks while closing the WL sub-system") Cc: stable@vger.kernel.org Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Cc: Martin Townsend <mtownsend1973@gmail.com> Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
NeilBrown authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit 011abdc9 upstream. If "re-add" is written to the "state" file for a device which is faulty, this has an effect similar to removing and re-adding the device. It should take up the same slot in the array that it previously had, and an accelerated (e.g. bitmap-based) rebuild should happen. The slot that "it previously had" is determined by rdev->saved_raid_disk. However this is not set when a device fails (only when a device is added), and it is cleared when resync completes. This means that "re-add" will normally work once, but may not work a second time. This patch includes two fixes. 1/ when a device fails, record the ->raid_disk value in ->saved_raid_disk before clearing ->raid_disk 2/ when "re-add" is written to a device for which ->saved_raid_disk is not set, fail. I think this is suitable for stable as it can cause re-adding a device to be forced to do a full resync which takes a lot longer and so puts data at more risk. Cc: <stable@vger.kernel.org> (v4.1) Fixes: 97f6cd39 ("md-cluster: re-add capabilities") Signed-off-by:
NeilBrown <neilb@suse.com> Reviewed-by:
Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by:
Shaohua Li <shli@fb.com> Signed-off-by:
-
Robert Elliott authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit 254a4cd5 upstream. The pmem driver does not honor a forced read-only setting for very long: $ blockdev --setro /dev/pmem0 $ blockdev --getro /dev/pmem0 1 followed by various commands like these: $ blockdev --rereadpt /dev/pmem0 or $ mkfs.ext4 /dev/pmem0 results in this in the kernel serial log: nd_pmem namespace0.0: region0 read-write, marking pmem0 read-write with the read-only setting lost: $ blockdev --getro /dev/pmem0 0 That's from bus.c nvdimm_revalidate_disk(), which always applies the setting from nd_region (which is initially based on the ACPI NFIT NVDIMM state flags not_armed bit). In contrast, commit 20bd1d02 ("scsi: sd: Keep disk read-only when re-reading partition") fixed this issue for SCSI devices to preserve the previous setting if it was set to read-only. This patch modifies bus.c to preserve any previous read-only setting. It also eliminates the kernel serial log print except for cases where read-write is changed to read-only, so it doesn't print read-only to read-only non-changes. Cc: <stable@vger.kernel.org> Fixes: 58138820 ("libnvdimm, nfit: handle unarmed dimms, mark namespaces read-only") Signed-off-by:
Robert Elliott <elliott@hpe.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Steffen Maier authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit 6a765508 upstream. Example trace record formatted with zfcpdbf from s390-tools: Timestamp : ... Area : REC Subarea : 00 Level : 1 Exception : - CPU ID : .. Caller : 0x... Record ID : 1 ZFCP_DBF_REC_TRIG Tag : ....... LUN : 0x... WWPN : 0x... D_ID : 0x... Adapter status : 0x... Port status : 0x... LUN status : 0x... Ready count : 0x... Running count : 0x... ERP want : 0x0. ZFCP_ERP_ACTION_REOPEN_... ERP need : 0xc0 ZFCP_ERP_ACTION_NONE Signed-off-by:
Steffen Maier <maier@linux.ibm.com> Cc: <stable@vger.kernel.org> #2.6.38+ Reviewed-by:
Benjamin Block <bblock@linux.ibm.com> Signed-off-by:
-
Steffen Maier authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit 8c3d20aa upstream. That other commit introduced an inconsistency because it would trace on ERP_FAILED for all callers of port forced reopen triggers (not just terminate_rport_io), but it would not trace on ERP_FAILED for all callers of other ERP triggers such as adapter, port regular, LUN. Therefore, generalize that other commit. zfcp_erp_action_enqueue() already had two early outs which re-used the one zfcp_dbf_rec_trig() call. All ERP trigger functions finally run through zfcp_erp_action_enqueue(). So move the special handling for ZFCP_STATUS_COMMON_ERP_FAILED into zfcp_erp_action_enqueue() and add another early out with new trace marker for pseudo ERP need in this case. This removes all early returns from all ERP trigger functions so we always end up at zfcp_dbf_rec_trig(). Example trace record formatted with zfcpdbf from s390-tools: Timestamp : ... Area : REC Subarea : 00 Level : 1 Exception : - CPU ID : .. Caller : 0x... Record ID : 1 ZFCP_DBF_REC_TRIG Tag : ....... LUN : 0x... WWPN : 0x... D_ID : 0x... Adapter status : 0x... Port status : 0x... LUN status : 0x... Ready count : 0x... Running count : 0x... ERP want : 0x0. ZFCP_ERP_ACTION_REOPEN_... ERP need : 0xe0 ZFCP_ERP_ACTION_FAILED Signed-off-by:
-
Steffen Maier authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit d70aab55 upstream. For problem determination we always want to see when we were invoked on the terminate_rport_io callback whether we perform something or not. Temporal event sequence of interest with a long fast_io_fail_tmo of 27 sec: loose remote port t workqueue [s] zfcp_q_<dev> IRQ zfcperp<dev> === ================== =================== ============================ 0 recv RSCN q p.test_link_work block rport start fast_io_fail_tmo send ADISC ELS 4 recv ADISC fail block zfcp_port port forced reopen send open port 12 recv open port fail q p.gid_pn_work zfcp_erp_wakeup (zfcp_erp_wait would return) GID_PN fail Before this point, we got a SCSI trace with tag "sctrpi1" on fast_io_fail, e.g. with the typical 5 sec setting. port.status |= ERP_FAILED If fast_io_fail_tmo triggers after this point, we missed a SCSI trace. workqueue fc_dl_<host> ================== 27 fc_timeout_fail_rport_io fc_terminate_rport_io zfcp_scsi_terminate_rport_io zfcp_erp_port_forced_reopen _zfcp_erp_port_forced_reopen if (port.status & ERP_FAILED) return; Therefore, write a trace before above early return. Example trace record formatted with zfcpdbf from s390-tools: Timestamp : ... Area : REC Subarea : 00 Level : 1 Exception : - CPU ID : .. Caller : 0x... Record ID : 1 ZFCP_DBF_REC_TRIG Tag : sctrpi1 SCSI terminate rport I/O LUN : 0xffffffffffffffff none (invalid) WWPN : 0x<wwpn> D_ID : 0x<n_port_id> Adapter status : 0x... Port status : 0x... LUN status : 0x00000000 none (invalid) Ready count : 0x... Running count : 0x... ERP want : 0x03 ZFCP_ERP_ACTION_REOPEN_PORT_FORCED ERP need : 0xe0 ZFCP_ERP_ACTION_FAILED Signed-off-by:
-
Steffen Maier authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit 96d92704 upstream. get_device() and its internally used kobject_get() only return NULL if they get passed NULL as argument. zfcp_get_port_by_wwpn() loops over adapter->port_list so the iteration variable port is always non-NULL. Struct device is embedded in struct zfcp_port so &port->dev is always non-NULL. This is the argument to get_device(). However, if we get an fc_rport in terminate_rport_io() for which we cannot find a match within zfcp_get_port_by_wwpn(), the latter can return NULL. v2.6.30 commit 70932935 ("[SCSI] zfcp: Fix oops when port disappears") introduced an early return without adding a trace record for this case. Even if we don't need recovery in this case, for debugging we should still see that our callback was invoked originally by scsi_transport_fc. Example trace record formatted with zfcpdbf from s390-tools: Timestamp : ... Area : REC Subarea : 00 Level : 1 Exception : - CPU ID : .. Caller : 0x... Record ID : 1 Tag : sctrpin SCSI terminate rport I/O, no zfcp port LUN : 0xffffffffffffffff none (invalid) WWPN : 0x<wwpn> WWPN D_ID : 0x<n_port_id> N_Port-ID Adapter status : 0x... Port status : 0xffffffff unknown (-1) LUN status : 0x00000000 none (invalid) Ready count : 0x... Running count : 0x... ERP want : 0x03 ZFCP_ERP_ACTION_REOPEN_PORT_FORCED ERP need : 0xc0 ZFCP_ERP_ACTION_NONE Signed-off-by:
-
Steffen Maier authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit 512857a7 upstream. If a SCSI device is deleted during scsi_eh host reset, we cannot get a reference to the SCSI device anymore since scsi_device_get returns !=0 by design. Assuming the recovery of adapter and port(s) was successful, zfcp_erp_strategy_followup_success() attempts to trigger a LUN reset for the half-gone SCSI device. Unfortunately, it causes the following confusing trace record which states that zfcp will do a LUN recovery as "ERP need" is ZFCP_ERP_ACTION_REOPEN_LUN == 1 and equals "ERP want". Old example trace record formatted with zfcpdbf from s390-tools: Tag: : ersfs_3 ERP, trigger, unit reopen, port reopen succeeded LUN : 0x<FCP_LUN> WWPN : 0x<WWPN> D_ID : 0x<N_Port-ID> Adapter status : 0x5400050b Port status : 0x54000001 LUN status : 0x40000000 ZFCP_STATUS_COMMON_RUNNING but not ZFCP_STATUS_COMMON_UNBLOCKED as it was closed on close part of adapter reopen ERP want : 0x01 ERP need : 0x01 misleading However, zfcp_erp_setup_act() returns NULL as it cannot get the reference. Hence, zfcp_erp_action_enqueue() takes an early goto out and _NO_ recovery actually happens. We always do want the recovery trigger trace record even if no erp_action could be enqueued as in this case. For other cases where we did not enqueue an erp_action, 'need' has always been zero to indicate this. In order to indicate above goto out, introduce an eyecatcher "flag" to mark the "ERP need" as 'not needed' but still keep the information which erp_action type, that zfcp_erp_required_act() had decided upon, is needed. 0xc_ is chosen to be visibly different from 0x0_ in "ERP want". New example trace record formatted with zfcpdbf from s390-tools: Tag: : ersfs_3 ERP, trigger, unit reopen, port reopen succeeded LUN : 0x<FCP_LUN> WWPN : 0x<WWPN> D_ID : 0x<N_Port-ID> Adapter status : 0x5400050b Port status : 0x54000001 LUN status : 0x40000000 ERP want : 0x01 ERP need : 0xc1 would need LUN ERP, but no action set up ^ Before v2.6.38 commit ae0904f6 ("[SCSI] zfcp: Redesign of the debug tracing for recovery actions.") we could detect this case because the "erp_action" field in the trace was NULL. The rework removed erp_action as argument and field from the trace. This patch here is for tracing. A fix to allow LUN recovery in the case at hand is a topic for a separate patch. See also commit fdbd1c5e ("[SCSI] zfcp: Allow running unit/LUN shutdown without acquiring reference") for a similar case and background info. Signed-off-by:
-
Steffen Maier authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit 81979ae6 upstream. We already have a SCSI trace for the end of abort and scsi_eh TMF. Due to zfcp_erp_wait() and fc_block_scsi_eh() time can pass between the start of our eh callback and an actual send/recv of an abort / TMF request. In order to see the temporal sequence including any abort / TMF send retries, add a trace before the above two blocking functions. This supports problem determination with scsi_eh and parallel zfcp ERP. No need to explicitly trace the beginning of our eh callback, since we typically can send an abort / TMF and see its HBA response (in the worst case, it's a pseudo response on dismiss all of adapter recovery, e.g. due to an FSF request timeout [fsrth_1] of the abort / TMF). If we cannot send, we now get a trace record for the first "abrt_wt" or "[lt]r_wait" which denotes almost the beginning of the callback. No need to explicitly trace the wakeup after the above two blocking functions because the next retry loop causes another trace in any case and that is sufficient. Example trace records formatted with zfcpdbf from s390-tools: Timestamp : ... Area : SCSI Subarea : 00 Level : 1 Exception : - CPU ID : .. Caller : 0x... Record ID : 1 Tag : abrt_wt abort, before zfcp_erp_wait() Request ID : 0x0000000000000000 none (invalid) SCSI ID : 0x<scsi_id> SCSI LUN : 0x<scsi_lun> SCSI LUN high : 0x<scsi_lun_high> SCSI result : 0x<scsi_result_of_cmd_to_be_aborted> SCSI retries : 0x<retries_of_cmd_to_be_aborted> SCSI allowed : 0x<allowed_retries_of_cmd_to_be_aborted> SCSI scribble : 0x<req_id_of_cmd_to_be_aborted> SCSI opcode : <CDB_of_cmd_to_be_aborted> FCP rsp inf cod: 0x.. none (invalid) FCP rsp IU : ... none (invalid) Timestamp : ... Area : SCSI Subarea : 00 Level : 1 Exception : - CPU ID : .. Caller : 0x... Record ID : 1 Tag : lr_wait LUN reset, before zfcp_erp_wait() Request ID : 0x0000000000000000 none (invalid) SCSI ID : 0x<scsi_id> SCSI LUN : 0x<scsi_lun> SCSI LUN high : 0x<scsi_lun_high> SCSI result : 0x... unrelated SCSI retries : 0x.. unrelated SCSI allowed : 0x.. unrelated SCSI scribble : 0x... unrelated SCSI opcode : ... unrelated FCP rsp inf cod: 0x.. none (invalid) FCP rsp IU : ... none (invalid) Signed-off-by:
-
Steffen Maier authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit df307816 upstream. For problem determination we need to see whether and why we were successful or not. This allows deduction of scsi_eh escalation. Example trace record formatted with zfcpdbf from s390-tools: Timestamp : ... Area : SCSI Subarea : 00 Level : 1 Exception : - CPU ID : .. Caller : 0x... Record ID : 1 Tag : schrh_r SCSI host reset handler result Request ID : 0x0000000000000000 none (invalid) SCSI ID : 0xffffffff none (invalid) SCSI LUN : 0xffffffff none (invalid) SCSI LUN high : 0xffffffff none (invalid) SCSI result : 0x00002002 field re-used for midlayer value: SUCCESS or in other cases: 0x2009 == FAST_IO_FAIL SCSI retries : 0xff none (invalid) SCSI allowed : 0xff none (invalid) SCSI scribble : 0xffffffffffffffff none (invalid) SCSI opcode : ffffffff ffffffff ffffffff ffffffff none (invalid) FCP rsp inf cod: 0xff none (invalid) FCP rsp IU : 00000000 00000000 00000000 00000000 none (invalid) 00000000 00000000 v2.6.35 commit a1dbfddd ("[SCSI] zfcp: Pass return code from fc_block_scsi_eh to scsi eh") introduced the first return with something other than the previously hardcoded single SUCCESS return path. Signed-off-by:
Jens Remus <jremus@linux.ibm.com> Reviewed-by:
-
Himanshu Madhani authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit 413c2f33 upstream. This patch prevents driver from setting lower default speed of 1 GB/sec, if the switch does not support Get Port Speed Capabilities (GPSC) command. Setting this default speed results into much lower write performance for large sequential WRITE. This patch modifies driver to check for gpsc_supported flags and prevents driver from issuing MBC_SET_PORT_PARAM (001Ah) to set default speed of 1 GB/sec. If driver does not send this mailbox command, firmware assumes maximum supported link speed and will operate at the max speed. Cc: stable@vger.kernel.org Signed-off-by:
Himanshu Madhani <himanshu.madhani@cavium.com> Reported-by:
Eda Zhou <ezhou@redhat.com> Reviewed-by:
Ewan D. Milne <emilne@redhat.com> Tested-by:
-
Martin Kelly authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit c043ec1c upstream. Currently, we use int for buffer length and bytes_per_datum. However, kfifo uses unsigned int for length and size_t for element size. We need to make sure these matches or we will have bugs related to overflow (in the range between INT_MAX and UINT_MAX for length, for example). In addition, set_bytes_per_datum uses size_t while bytes_per_datum is an int, which would cause bugs for large values of bytes_per_datum. Change buffer length to use unsigned int and bytes_per_datum to use size_t. Signed-off-by:
Martin Kelly <mkelly@xevo.com> Cc: <Stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> [bwh: Backported to 4.4: - Drop change to iio_dma_buffer_set_length() - Adjust filename, context] Signed-off-by:
-
