- 09 Sep, 2018 39 commits
-
-
Vignesh R authored
commit 38dabd91 upstream. pwm-tiehrpwm driver disables PWM output by putting it in low output state via active AQCSFRC register in ehrpwm_pwm_disable(). But, the AQCSFRC shadow register is not updated. Therefore, when shadow AQCSFRC register is re-enabled in ehrpwm_pwm_enable() (say to enable second PWM output), previous settings are lost as shadow register value is loaded into active register. This results in things like PWMA getting enabled automatically, when PWMB is enabled and vice versa. Fix this by updating AQCSFRC shadow register as well during ehrpwm_pwm_disable(). Fixes: 19891b20 ("pwm: pwm-tiehrpwm: PWM driver support for EHRPWM") Cc: stable@vger.kernel.org Signed-off-by:
Vignesh R <vigneshr@ti.com> Signed-off-by:
Thierry Reding <thierry.reding@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Richard Weinberger authored
commit 59965593 upstream. In ubifs_jnl_update() we sync parent and child inodes to the flash, in case of xattrs, the parent inode (AKA host inode) has a non-zero data_len. Therefore we need to adjust synced_i_size too. This issue was reported by ubifs self tests unter a xattr related work load. UBIFS error (ubi0:0 pid 1896): dbg_check_synced_i_size: ui_size is 4, synced_i_size is 0, but inode is clean UBIFS error (ubi0:0 pid 1896): dbg_check_synced_i_size: i_ino 65, i_mode 0x81a4, i_size 4 Cc: <stable@vger.kernel.org> Fixes: 1e51764a ("UBIFS: add new flash file system") Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Richard Weinberger authored
commit 95a22d20 upstream. Check whether the size is within bounds before using it. If the size is not correct, abort and dump the bad data node. Cc: Kees Cook <keescook@chromium.org> Cc: Silvio Cesare <silvio.cesare@gmail.com> Cc: stable@vger.kernel.org Fixes: 1e51764a ("UBIFS: add new flash file system") Reported-by:
Silvio Cesare <silvio.cesare@gmail.com> Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Richard Weinberger authored
commit 08acbdd6 upstream. This reverts commit 353748a3. It bypassed the linux-mtd review process and fixes the issue not as it should. Cc: Kees Cook <keescook@chromium.org> Cc: Silvio Cesare <silvio.cesare@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Richard Weinberger authored
commit eef19816 upstream. Allocate the buffer after we return early. Otherwise memory is being leaked. Cc: <stable@vger.kernel.org> Fixes: 1e51764a ("UBIFS: add new flash file system") Signed-off-by:
-
Jann Horn authored
commit 5820f140 upstream. The old code would hold the userns_state_mutex indefinitely if memdup_user_nul stalled due to e.g. a userfault region. Prevent that by moving the memdup_user_nul in front of the mutex_lock(). Note: This changes the error precedence of invalid buf/count/*ppos vs map already written / capabilities missing. Fixes: 22d917d8 ("userns: Rework the user_namespace adding uid/gid...") Cc: stable@vger.kernel.org Signed-off-by:
Jann Horn <jannh@google.com> Acked-by:
Christian Brauner <christian@brauner.io> Acked-by:
Serge Hallyn <serge@hallyn.com> Signed-off-by:
Eric W. Biederman <ebiederm@xmission.com> Signed-off-by:
-
Jann Horn authored
commit 42a0cc34 upstream. Holding uts_sem as a writer while accessing userspace memory allows a namespace admin to stall all processes that attempt to take uts_sem. Instead, move data through stack buffers and don't access userspace memory while uts_sem is held. Cc: stable@vger.kernel.org Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Al Viro authored
commit 9ba3eb51 upstream. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Jacob Pan authored
commit 1c48db44 upstream. PFSID should be used in the invalidation descriptor for flushing device IOTLBs on SRIOV VFs. Signed-off-by:
Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: stable@vger.kernel.org Cc: "Ashok Raj" <ashok.raj@intel.com> Cc: "Lu Baolu" <baolu.lu@linux.intel.com> Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Jacob Pan authored
commit 0f725561 upstream. When SRIOV VF device IOTLB is invalidated, we need to provide the PF source ID such that IOMMU hardware can gauge the depth of invalidation queue which is shared among VFs. This is needed when device invalidation throttle (DIT) capability is supported. This patch adds bit definitions for checking and tracking PFSID. Signed-off-by:
-
Peter Zijlstra authored
commit a6f57208 upstream. Will noted that only checking mm_users is incorrect; we should also check mm_count in order to cover CPUs that have a lazy reference to this mm (and could do speculative TLB operations). If removing this turns out to be a performance issue, we can re-instate a more complete check, but in tlb_table_flush() eliding the call_rcu_sched(). Fixes: 26723911 ("mm, powerpc: move the RCU page-table freeing into generic code") Reported-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by:
Rik van Riel <riel@surriel.com> Acked-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Jon Hunter authored
commit 6e181190 upstream. On all versions of Tegra30 Cardhu, the reset signal to the NXP PCA9546 I2C mux is connected to the Tegra GPIO BB0. Currently, this pin on the Tegra is not configured as a GPIO but as a special-function IO (SFIO) that is multiplexing the pin to an I2S controller. On exiting system suspend, I2C commands sent to the PCA9546 are failing because there is no ACK. Although it is not possible to see exactly what is happening to the reset during suspend, by ensuring it is configured as a GPIO and driven high, to de-assert the reset, the failures are no longer seen. Please note that this GPIO is also used to drive the reset signal going to the camera connector on the board. However, given that there is no camera support currently for Cardhu, this should not have any impact. Fixes: 40431d16 ("ARM: tegra: enable PCA9546 on Cardhu") Cc: stable@vger.kernel.org Signed-off-by:
Jon Hunter <jonathanh@nvidia.com> Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Dan Carpenter authored
commit 0914bb96 upstream. "dev->nr_children" is the number of children which were parsed successfully in bl_parse_stripe(). It could be all of them and then, in that case, it is equal to v->stripe.volumes_count. Either way, the > should be >= so that we don't go beyond the end of what we're supposed to. Fixes: 5c83746a ("pnfs/blocklayout: in-kernel GETDEVICEINFO XDR parsing") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Cc: stable@vger.kernel.org # 3.17+ Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
-
zhangyi (F) authored
commit 3df6f61f upstream. Commit ea0212f4 (power: auto select CONFIG_SRCU) made the code in drivers/base/power/wakeup.c use SRCU instead of RCU, but it forgot to select CONFIG_SRCU in Kconfig, which leads to the following build error if CONFIG_SRCU is not selected somewhere else: drivers/built-in.o: In function `wakeup_source_remove': (.text+0x3c6fc): undefined reference to `synchronize_srcu' drivers/built-in.o: In function `pm_print_active_wakeup_sources': (.text+0x3c7a8): undefined reference to `__srcu_read_lock' drivers/built-in.o: In function `pm_print_active_wakeup_sources': (.text+0x3c84c): undefined reference to `__srcu_read_unlock' drivers/built-in.o: In function `device_wakeup_arm_wake_irqs': (.text+0x3d1d8): undefined reference to `__srcu_read_lock' drivers/built-in.o: In function `device_wakeup_arm_wake_irqs': (.text+0x3d228): undefined reference to `__srcu_read_unlock' drivers/built-in.o: In function `device_wakeup_disarm_wake_irqs': (.text+0x3d24c): undefined reference to `__srcu_read_lock' drivers/built-in.o: In function `device_wakeup_disarm_wake_irqs': (.text+0x3d29c): undefined reference to `__srcu_read_unlock' drivers/built-in.o:(.data+0x4158): undefined reference to `process_srcu' Fix this error by selecting CONFIG_SRCU when PM_SLEEP is enabled. Fixes: ea0212f4 (power: auto select CONFIG_SRCU) Cc: 4.2+ <stable@vger.kernel.org> # 4.2+ Signed-off-by:
zhangyi (F) <yi.zhang@huawei.com> [ rjw: Minor subject/changelog fixups ] Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Tomas Bortoli authored
commit 10aa1452 upstream. Added checks to prevent GPFs from raising. Link: http://lkml.kernel.org/r/20180727110558.5479-1-tomasbortoli@gmail.comSigned-off-by:
Tomas Bortoli <tomasbortoli@gmail.com> Reported-by: syzbot+1a262da37d3bead15c39@syzkaller.appspotmail.com Cc: stable@vger.kernel.org Signed-off-by:
Dominique Martinet <dominique.martinet@cea.fr> Signed-off-by:
-
Steven Rostedt (VMware) authored
commit 016f8ffc upstream. While debugging another bug, I was looking at all the synchronize*() functions being used in kernel/trace, and noticed that trace_uprobes was using synchronize_sched(), with a comment to synchronize with {u,ret}_probe_trace_func(). When looking at those functions, the data is protected with "rcu_read_lock()" and not with "rcu_read_lock_sched()". This is using the wrong synchronize_*() function. Link: http://lkml.kernel.org/r/20180809160553.469e1e32@gandalf.local.home Cc: stable@vger.kernel.org Fixes: 70ed91c6 ("tracing/uprobes: Support ftrace_event_file base multibuffer") Acked-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Snild Dolkow authored
commit 3e536e22 upstream. There is a window for racing when printing directly to task->comm, allowing other threads to see a non-terminated string. The vsnprintf function fills the buffer, counts the truncated chars, then finally writes the \0 at the end. creator other vsnprintf: fill (not terminated) count the rest trace_sched_waking(p): ... memcpy(comm, p->comm, TASK_COMM_LEN) write \0 The consequences depend on how 'other' uses the string. In our case, it was copied into the tracing system's saved cmdlines, a buffer of adjacent TASK_COMM_LEN-byte buffers (note the 'n' where 0 should be): crash-arm64> x/1024s savedcmd->saved_cmdlines | grep 'evenk' 0xffffffd5b3818640: "irq/497-pwr_evenkworker/u16:12" ...and a strcpy out of there would cause stack corruption: [224761.522292] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: ffffff9bf9783c78 crash-arm64> kbt | grep 'comm\|trace_print_context' #6 0xffffff9bf9783c78 in trace_print_context+0x18c(+396) comm (char [16]) = "irq/497-pwr_even" crash-arm64> rd 0xffffffd4d0e17d14 8 ffffffd4d0e17d14: 2f71726900000000 5f7277702d373934 ....irq/497-pwr_ ffffffd4d0e17d24: 726f776b6e657665 3a3631752f72656b evenkworker/u16: ffffffd4d0e17d34: f9780248ff003231 cede60e0ffffff9b 12..H.x......`.. ffffffd4d0e17d44: cede60c8ffffffd4 00000fffffffffd4 .....`.......... The workaround in e09e2867 (use strlcpy in __trace_find_cmdline) was likely needed because of this same bug. Solved by vsnprintf:ing to a local buffer, then using set_task_comm(). This way, there won't be a window where comm is not terminated. Link: http://lkml.kernel.org/r/20180726071539.188015-1-snild@sony.com Cc: stable@vger.kernel.org Fixes: bc0c38d1 ("ftrace: latency tracer infrastructure") Reviewed-by:
Snild Dolkow <snild@sony.com> Signed-off-by:
-
Steven Rostedt (VMware) authored
commit 757d9140 upstream. Masami Hiramatsu reported: Current trace-enable attribute in sysfs returns an error if user writes the same setting value as current one, e.g. # cat /sys/block/sda/trace/enable 0 # echo 0 > /sys/block/sda/trace/enable bash: echo: write error: Invalid argument # echo 1 > /sys/block/sda/trace/enable # echo 1 > /sys/block/sda/trace/enable bash: echo: write error: Device or resource busy But this is not a preferred behavior, it should ignore if new setting is same as current one. This fixes the problem as below. # cat /sys/block/sda/trace/enable 0 # echo 0 > /sys/block/sda/trace/enable # echo 1 > /sys/block/sda/trace/enable # echo 1 > /sys/block/sda/trace/enable Link: http://lkml.kernel.org/r/20180816103802.08678002@gandalf.local.home Cc: Ingo Molnar <mingo@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: linux-block@vger.kernel.org Cc: stable@vger.kernel.org Fixes: cd649b8b ("blktrace: remove sysfs_blk_trace_enable_show/store()") Reported-by:
Masami Hiramatsu <mhiramat@kernel.org> Tested-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Steven Rostedt (VMware) authored
commit f143641b upstream. Currently, when one echo's in 1 into tracing_on, the current tracer's "start()" function is executed, even if tracing_on was already one. This can lead to strange side effects. One being that if the hwlat tracer is enabled, and someone does "echo 1 > tracing_on" into tracing_on, the hwlat tracer's start() function is called again which will recreate another kernel thread, and make it unable to remove the old one. Link: http://lkml.kernel.org/r/1533120354-22923-1-git-send-email-erica.bugden@linutronix.de Cc: stable@vger.kernel.org Fixes: 2df8f8a6 ("tracing: Fix regression with irqsoff tracer and tracing_on file") Reported-by:
Erica Bugden <erica.bugden@linutronix.de> Signed-off-by:
-
Nadav Amit authored
commit c3cc1b0f upstream. Currently, when all modules, including VMCI and VMware balloon are built into the kernel, the initialization of the balloon happens before the VMCI is probed. As a result, the balloon fails to initialize the VMCI doorbell, which it uses to get asynchronous requests for balloon size changes. The problem can be seen in the logs, in the form of the following message: "vmw_balloon: failed to initialize vmci doorbell" The driver would work correctly but slightly less efficiently, probing for requests periodically. This patch changes the balloon to be initialized using late_initcall() instead of module_init() to address this issue. It does not address a situation in which VMCI is built as a module and the balloon is built into the kernel. Fixes: 48e3d668 ("VMware balloon: Enable notification via VMCI") Cc: stable@vger.kernel.org Reviewed-by:
Xavier Deguillard <xdeguillard@vmware.com> Signed-off-by:
Nadav Amit <namit@vmware.com> Signed-off-by:
-
Nadav Amit authored
commit ce664331 upstream. When vmballoon_vmci_init() sets a doorbell using VMCI_DOORBELL_SET, for some reason it does not consider the status and looks at the result. However, the hypervisor does not update the result - it updates the status. This might cause VMCI doorbell not to be enabled, resulting in degraded performance. Fixes: 48e3d668 ("VMware balloon: Enable notification via VMCI") Cc: stable@vger.kernel.org Reviewed-by:
-
Nadav Amit authored
commit 5081efd1 upstream. If the hypervisor sets 2MB batching is on, while batching is cleared, the balloon code breaks. In this case the legacy mechanism is used with 2MB page. The VM would report a 2MB page is ballooned, and the hypervisor would only take the first 4KB. While the hypervisor should not report such settings, make the code more robust by not enabling 2MB support without batching. Fixes: 365bd7ef ("VMware balloon: Support 2m page ballooning.") Cc: stable@vger.kernel.org Reviewed-by:
Nadav Amit <nadav.amit@gmail.com> Signed-off-by:
-
Nadav Amit authored
commit 09755690 upstream. When balloon batching is not supported by the hypervisor, the guest frame number (GFN) must fit in 32-bit. However, due to a bug, this check was mistakenly ignored. In practice, when total RAM is greater than 16TB, the balloon does not work currently, making this bug unlikely to happen. Fixes: ef0f8f11 ("VMware balloon: partially inline vmballoon_reserve_page.") Cc: stable@vger.kernel.org Reviewed-by:
-
Lars-Peter Clausen authored
commit 9a5094ca upstream. A sysfs write callback function needs to either return the number of consumed characters or an error. The ad952x_store() function currently returns 0 if the input value was "0", this will signal that no characters have been consumed and the function will be called repeatedly in a loop indefinitely. Fix this by returning number of supplied characters to indicate that the whole input string has been consumed. Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
Alexandru Ardelean <alexandru.ardelean@analog.com> Fixes: cd1678f9 ("iio: frequency: New driver for AD9523 SPI Low Jitter Clock Generator") Cc: <Stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
-
Lars-Peter Clausen authored
commit 5a4e33c1 upstream. Fix the displayed phase for the ad9523 driver. Currently the most significant decimal place is dropped and all other digits are shifted one to the left. This is due to a multiplication by 10, which is not necessary, so remove it. Signed-off-by:
-
Mike Snitzer authored
commit fd2fa954 upstream. policy_hint_size starts as 0 during __write_initial_superblock(). It isn't until the policy is loaded that policy_hint_size is set in-core (cmd->policy_hint_size). But it never got recorded in the on-disk superblock because __commit_transaction() didn't deal with transfering the in-core cmd->policy_hint_size to the on-disk superblock. The in-core cmd->policy_hint_size gets initialized by metadata_open()'s __begin_transaction_flags() which re-reads all superblock fields. Because the superblock's policy_hint_size was never properly stored, when the cache was created, hints_array_available() would always return false when re-activating a previously created cache. This means __load_mappings() always considered the hints invalid and never made use of the hints (these hints served to optimize). Another detremental side-effect of this oversight is the cache_check utility would fail with: "invalid hint width: 0" Cc: stable@vger.kernel.org Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Jiri Slaby authored
Mostly recycling the commit log from adaba23c which fixed populate_pmd, but did not fix populate_pud. The same problem exists there. Stable trees reverted the following patch: Revert "x86/mm/pat: Ensure cpa->pfn only contains page frame numbers" This reverts commit 87e2bd89 which is commit edc3b912 upstream. but the L1TF patch 02ff2769 backported here x86/mm/pat: Make set_memory_np() L1TF safe commit 958f79b9 upstream set_memory_np() is used to mark kernel mappings not present, but it has it's own open coded mechanism which does not have the L1TF protection of inverting the address bits. assumed that cpa->pfn contains a PFN. With the above patch reverted it does not, which causes the PUD to be set to an incorrect address shifted by 12 bits, which can cause various failures. Convert the address to a PFN before passing it to pud_pfn(). This is a 4.4 stable only patch to fix the L1TF patches backport there. Cc: stable@vger.kernel.org # 4.4-only Cc: Andi Kleen <ak@linux.intel.com> Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Signed-off-by:
-
Tomas Bortoli authored
commit 430ac66e upstream. The patch adds the flush in p9_mux_poll_stop() as it the function used by p9_conn_destroy(), in turn called by p9_fd_close() to stop the async polling associated with the data regarding the connection. Link: http://lkml.kernel.org/r/20180720092730.27104-1-tomasbortoli@gmail.comSigned-off-by:
-
Tomas Bortoli authored
commit 7913690d upstream. The p9_client_version() does not initialize the version pointer. If the call to p9pdu_readf() returns an error and version has not been allocated in p9pdu_readf(), then the program will jump to the "error" label and will try to free the version pointer. If version is not initialized, free() will be called with uninitialized, garbage data and will provoke a crash. Link: http://lkml.kernel.org/r/20180709222943.19503-1-tomasbortoli@gmail.comSigned-off-by:
Jun Piao <piaojun@huawei.com> Reviewed-by:
Yiwen Jiang <jiangyiwen@huawei.com> Cc: Eric Van Hensbergen <ericvh@gmail.com> Cc: Ron Minnich <rminnich@sandia.gov> Cc: Latchesar Ionkov <lucho@ionkov.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Cc: stable@vger.kernel.org Signed-off-by:
-
jiangyiwen authored
commit 23cba9cb upstream. Because the value of limit is VIRTQUEUE_NUM, if index is equal to limit, it will cause sg array out of bounds, so correct the judgement of BUG_ON. Link: http://lkml.kernel.org/r/5B63D5F6.6080109@huawei.comSigned-off-by:
-
piaojun authored
commit 3111784b upstream. In my testing, v9fs_fid_xattr_set will return successfully even if the backend ext4 filesystem has no space to store xattr key-value. That will cause inconsistent behavior between front end and back end. The reason is that lsetxattr will be triggered by p9_client_clunk, and unfortunately we did not catch the error. This patch will catch the error to notify upper caller. p9_client_clunk (in 9p) p9_client_rpc(clnt, P9_TCLUNK, "d", fid->fid); v9fs_clunk (in qemu) put_fid free_fid v9fs_xattr_fid_clunk v9fs_co_lsetxattr s->ops->lsetxattr ext4_xattr_user_set (in host ext4 filesystem) Link: http://lkml.kernel.org/r/5B57EACC.2060900@huawei.comSigned-off-by:
-
Mahesh Salgaonkar authored
commit cd813e1c upstream. During Machine Check interrupt on pseries platform, register r3 points RTAS extended event log passed by hypervisor. Since hypervisor uses r3 to pass pointer to rtas log, it stores the original r3 value at the start of the memory (first 8 bytes) pointed by r3. Since hypervisor stores this info and rtas log is in BE format, linux should make sure to restore r3 value in correct endian format. Without this patch when MCE handler, after recovery, returns to code that that caused the MCE may end up with Data SLB access interrupt for invalid address followed by kernel panic or hang. Severe Machine check interrupt [Recovered] NIP [d00000000ca301b8]: init_module+0x1b8/0x338 [bork_kernel] Initiator: CPU Error type: SLB [Multihit] Effective address: d00000000ca70000 cpu 0xa: Vector: 380 (Data SLB Access) at [c0000000fc7775b0] pc: c0000000009694c0: vsnprintf+0x80/0x480 lr: c0000000009698e0: vscnprintf+0x20/0x60 sp: c0000000fc777830 msr: 8000000002009033 dar: a803a30c000000d0 current = 0xc00000000bc9ef00 paca = 0xc00000001eca5c00 softe: 3 irq_happened: 0x01 pid = 8860, comm = insmod vscnprintf+0x20/0x60 vprintk_emit+0xb4/0x4b0 vprintk_func+0x5c/0xd0 printk+0x38/0x4c init_module+0x1c0/0x338 [bork_kernel] do_one_initcall+0x54/0x230 do_init_module+0x8c/0x248 load_module+0x12b8/0x15b0 sys_finit_module+0xa8/0x110 system_call+0x58/0x6c --- Exception: c00 (System Call) at 00007fff8bda0644 SP (7fffdfbfe980) is in userspace This patch fixes this issue. Fixes: a08a53ea ("powerpc/le: Enable RTAS events support") Cc: stable@vger.kernel.org # v3.15+ Reviewed-by:
Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Hari Bathini authored
commit 1bd6a1c4 upstream. Crash memory ranges is an array of memory ranges of the crashing kernel to be exported as a dump via /proc/vmcore file. The size of the array is set based on INIT_MEMBLOCK_REGIONS, which works alright in most cases where memblock memory regions count is less than INIT_MEMBLOCK_REGIONS value. But this count can grow beyond INIT_MEMBLOCK_REGIONS value since commit 142b45a7 ("memblock: Add array resizing support"). On large memory systems with a few DLPAR operations, the memblock memory regions count could be larger than INIT_MEMBLOCK_REGIONS value. On such systems, registering fadump results in crash or other system failures like below: task: c00007f39a290010 ti: c00000000b738000 task.ti: c00000000b738000 NIP: c000000000047df4 LR: c0000000000f9e58 CTR: c00000000010f180 REGS: c00000000b73b570 TRAP: 0300 Tainted: G L X (4.4.140+) MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 22004484 XER: 20000000 CFAR: c000000000008500 DAR: 000007a450000000 DSISR: 40000000 SOFTE: 0 ... NIP [c000000000047df4] smp_send_reschedule+0x24/0x80 LR [c0000000000f9e58] resched_curr+0x138/0x160 Call Trace: resched_curr+0x138/0x160 (unreliable) check_preempt_curr+0xc8/0xf0 ttwu_do_wakeup+0x38/0x150 try_to_wake_up+0x224/0x4d0 __wake_up_common+0x94/0x100 ep_poll_callback+0xac/0x1c0 __wake_up_common+0x94/0x100 __wake_up_sync_key+0x70/0xa0 sock_def_readable+0x58/0xa0 unix_stream_sendmsg+0x2dc/0x4c0 sock_sendmsg+0x68/0xa0 ___sys_sendmsg+0x2cc/0x2e0 __sys_sendmsg+0x5c/0xc0 SyS_socketcall+0x36c/0x3f0 system_call+0x3c/0x100 as array index overflow is not checked for while setting up crash memory ranges causing memory corruption. To resolve this issue, dynamically allocate memory for crash memory ranges and resize it incrementally, in units of pagesize, on hitting array size limit. Fixes: 2df173d9 ("fadump: Initialize elfcore header and add PT_LOAD program headers.") Cc: stable@vger.kernel.org # v3.4+ Signed-off-by:
Hari Bathini <hbathini@linux.ibm.com> Reviewed-by:
-
Matthew Auld authored
commit c11c7bfd upstream. Operating on a zero sized GEM userptr object will lead to explosions. Fixes: 5cc9ed4b ("drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl") Testcase: igt/gem_userptr_blits/input-checking Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Bartosz Golaszewski authored
commit 563a53f3 upstream. On non-OF systems spi->controlled_data may be NULL. This causes a NULL pointer derefence on dm365-evm. Signed-off-by:
Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Signed-off-by:
-
Ben Hutchings authored
Commit 136f55f6 ("net: lan78xx: fix rx handling before first packet is send") was not correctly backported to 4.4. The call to tasklet_schedule() belongs in lan78xx_link_reset(). Fixes: d1fc12d8 ("net: lan78xx: fix rx handling before first packet is send") Signed-off-by:
Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
-
Chirantan Ekbote authored
commit d28c756c upstream. The zero-copy optimization when reading or writing large chunks of data is quite useful. However, the 9p messages created through the zero-copy write path have an incorrect message size: it should be the size of the header + size of the data being written but instead it's just the size of the header. This only works if the server ignores the size field of the message and otherwise breaks the framing of the protocol. Fix this by re-writing the message size field with the correct value. Tested by running `dd if=/dev/zero of=out bs=4k count=1` inside a virtio-9p mount. Link: http://lkml.kernel.org/r/20180717003529.114368-1-chirantan@chromium.orgSigned-off-by:
Chirantan Ekbote <chirantan@chromium.org> Reviewed-by:
Greg Kurz <groug@kaod.org> Tested-by:
-
Alexander Aring authored
commit f9c52831 upstream. This patch is necessary if case of AF_PACKET or other socket interface which I am aware of it and didn't allocated the necessary room. Reported-by:
David Palma <david.palma@ntnu.no> Reported-by:
Rabi Narayan Sahoo <rabinarayans0828@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
Alexander Aring <aring@mojatatu.com> Signed-off-by:
Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by:
-
Alexander Aring authored
commit ac74f87c upstream. This patch fixes patch add handling to take care tail and headroom for single 6lowpan frames. We need to be sure we have a skb with the right head and tailroom for single frames. This patch do it by using skb_copy_expand() if head and tailroom is not enough allocated by upper layer. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=195059Reported-by:
-
- 05 Sep, 2018 1 commit
-
-
Greg Kroah-Hartman authored
-
