- 04 Jul, 2024 21 commits
-
-
Sandipan Das authored
For uncore PMUs, a single context is shared across all CPUs in a domain. The domain can be a CCX, like in the case of the L3 PMU, or a socket, like in the case of DF and UMC PMUs. This information is available via the PMU's cpumask. For contexts shared across a socket, the domain is currently determined from topology_die_id() which is incorrect after the introduction of commit 63edbaa4 ("x86/cpu/topology: Add support for the AMD 0x80000026 leaf") as it now returns a CCX identifier on Zen 4 and later systems which support CPUID leaf 0x80000026. Use topology_logical_package_id() instead as it always returns a socket identifier irrespective of the availability of CPUID leaf 0x80000026. Fixes: 63edbaa4 ("x86/cpu/topology: Add support for the AMD 0x80000026 leaf") Signed-off-by:
Sandipan Das <sandipan.das@amd.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20240626074942.1044818-1-sandipan.das@amd.com
-
Sandipan Das authored
X86_FEATURE_PERFCTR_NB and X86_FEATURE_PERFCTR_LLC are derived from CPUID leaf 0x80000001 ECX bits 24 and 28 respectively and denote the availability of DF and L3 counters. When these bits are not set, the corresponding PMUs have no counters and hence, should not be registered. Fixes: 07888daa ("perf/x86/amd/uncore: Move discovery and registration") Signed-off-by:
-
Kan Liang authored
The architectural performance monitoring V6 supports a new range of counters' MSRs in the 19xxH address range. They include all the GP counter MSRs, the GP control MSRs, and the fixed counter MSRs. The step between each sibling counter is 4. Add intel_pmu_addr_offset() to calculate the correct offset. Add fixedctr in struct x86_pmu to store the address of the fixed counter 0. It can be used to calculate the rest of the fixed counters. The MSR address of the fixed counter control is not changed. Signed-off-by:
Kan Liang <kan.liang@linux.intel.com> Signed-off-by:
Andi Kleen <ak@linux.intel.com> Reviewed-by:
Ian Rogers <irogers@google.com> Link: https://lkml.kernel.org/r/20240626143545.480761-9-kan.liang@linux.intel.com
-
Kan Liang authored
Two new fields (the unit mask2, and the equal flag) are added in the IA32_PERFEVTSELx MSRs. They can be enumerated by the CPUID.23H.0.EBX. Update the config_mask in x86_pmu and x86_hybrid_pmu for the true layout of the PERFEVTSEL. Expose the new formats into sysfs if they are available. The umask extension reuses the same format attr name "umask" as the previous umask. Add umask2_show to determine/display the correct format for the current machine. Co-developed-by:
Dapeng Mi <dapeng1.mi@linux.intel.com> Signed-off-by:
-
Kan Liang authored
Different vendors may support different fields in EVENTSEL MSR, such as Intel would introduce new fields umask2 and eq bits in EVENTSEL MSR since Perfmon version 6. However, a fixed mask X86_RAW_EVENT_MASK is used to filter the attr.config. Introduce a new config_mask to record the real supported EVENTSEL bitmask. Only apply it to the existing code now. No functional change. Co-developed-by:
-
Kan Liang authored
A new PEBS data source format is introduced for the p-core of Lunar Lake. The data source field is extended to 8 bits with new encodings. A new layout is introduced into the union intel_x86_pebs_dse. Introduce the lnl_latency_data() to parse the new format. Enlarge the pebs_data_source[] accordingly to include new encodings. Only the mem load and the mem store events can generate the data source. Introduce INTEL_HYBRID_LDLAT_CONSTRAINT and INTEL_HYBRID_STLAT_CONSTRAINT to mark them. Add two new bits for the new cache-related data src, L2_MHB and MSC. The L2_MHB is short for L2 Miss Handling Buffer, which is similar to LFB (Line Fill Buffer), but to track the L2 Cache misses. The MSC stands for the memory-side cache. Signed-off-by:
-
Kan Liang authored
The model-specific pebs_latency_data functions of ADL and MTL use the "small" as a postfix to indicate the e-core. The postfix is too generic for a model-specific function. It cannot provide useful information that can directly map it to a specific uarch, which can facilitate the development and maintenance. Use the abbr of the uarch to rename the model-specific functions. Suggested-by:
-
Kan Liang authored
From PMU's perspective, Lunar Lake and Arrow Lake are similar to the previous generation Meteor Lake. Both are hybrid platforms, with e-core and p-core. The key differences include: - The e-core supports 3 new fixed counters - The p-core supports an updated PEBS Data Source format - More GP counters (Updated event constraint table) - New Architectural performance monitoring V6 (New Perfmon MSRs aliasing, umask2, eq). - New PEBS format V6 (Counters Snapshotting group) - New RDPMC metrics clear mode The legacy features, the 3 new fixed counters and updated event constraint table are enabled in this patch. The new PEBS data source format, the architectural performance monitoring V6, the PEBS format V6, and the new RDPMC metrics clear mode are supported in the following patches. Signed-off-by:
-
Kan Liang authored
The current perf assumes that both GP and fixed counters are contiguous. But it's not guaranteed on newer Intel platforms or in a virtualization environment. Use the counter mask to replace the number of counters for both GP and the fixed counters. For the other ARCHs or old platforms which don't support a counter mask, using GENMASK_ULL(num_counter - 1, 0) to replace. There is no functional change for them. The interface to KVM is not changed. The number of counters still be passed to KVM. It can be updated later separately. Signed-off-by:
-
Kan Liang authored
The current perf assumes that the counters that support PEBS are contiguous. But it's not guaranteed with the new leaf 0x23 introduced. The counters are enumerated with a counter mask. There may be holes in the counter mask for future platforms or in a virtualization environment. Store the PEBS event mask rather than the maximum number of PEBS counters in the x86 PMU structures. Signed-off-by:
-
Zhang Rui authored
Compared with previous client platforms, PC8 is removed from Lunarlake. It supports CC1/CC6/CC7 and PC2/PC3/PC6/PC10 residency counters. Signed-off-by:
Zhang Rui <rui.zhang@intel.com> Signed-off-by:
-
Zhang Rui authored
Like Alderlake, Arrowlake supports CC1/CC6/CC7 and PC2/PC3/PC6/PC8/PC10. Signed-off-by:
-
Zhang Rui authored
For Alderlake, the spec changes after the patch submitted and PC7/PC9 are removed. Raptorlake and Meteorlake, which copy the Alderlake cstate PMU, also don't have PC7/PC9. Remove PC7/PC9 support for Alderlake/Raptorlake/Meteorlake. Fixes: d0ca946b ("perf/x86/cstate: Add Alder Lake CPU support") Signed-off-by:
-
Peter Zijlstra authored
The Lunarlake patches rely on the new VFM stuff. Signed-off-by: -
Adrian Hunter authored
rb_alloc_aux() should not be called with nr_pages <= 0. Make it more robust and readable by returning an error immediately in that case. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Signed-off-by:
-
Adrian Hunter authored
The default aux_watermark is half the AUX area buffer size. In general, on a 64-bit architecture, the AUX area buffer size could be a bigger than fits in a 32-bit type, but the calculation does not allow for that possibility. However the aux_watermark value is recorded in a u32, so should not be more than U32_MAX either. Fix by doing the calculation in a correctly sized type, and limiting the result to U32_MAX. Fixes: d68e6799 ("perf: Cap allocation order at aux_watermark") Signed-off-by:
-
Adrian Hunter authored
nr_pages is unsigned long but gets passed to rb_alloc_aux() as an int, and is stored as an int. Only power-of-2 values are accepted, so if nr_pages is a 64_bit value, it will be passed to rb_alloc_aux() as zero. That is not ideal because: 1. the value is incorrect 2. rb_alloc_aux() is at risk of misbehaving, although it manages to return -ENOMEM in that case, it is a result of passing zero to get_order() even though the get_order() result is documented to be undefined in that case. Fix by simply validating the maximum supported value in the first place. Use -ENOMEM error code for consistency with the current error code that is returned in that case. Fixes: 45bfb2e5 ("perf: Add AUX area to ring buffer for raw data streams") Signed-off-by:
-
Adrian Hunter authored
perf_buffer->aux_nr_pages uses a 32-bit type, so a cast is needed to calculate a 64-bit size. Fixes: 45bfb2e5 ("perf: Add AUX area to ring buffer for raw data streams") Signed-off-by:
-
Adrian Hunter authored
Currently, perf allocates an array of page pointers which is limited in size by MAX_PAGE_ORDER. That in turn limits the maximum Intel PT buffer size to 2GiB. Should that limitation be lifted, the Intel PT driver can support larger sizes, except for one calculation in pt_topa_entry_for_page(), which is limited to 32-bits. Fix pt_topa_entry_for_page() address calculation by adding a cast. Fixes: 39152ee5 ("perf/x86/intel/pt: Get rid of reverse lookup table for ToPA") Signed-off-by:
-
Adrian Hunter authored
topa_entry->base is a bit-field. Bit-fields are not promoted to a 64-bit type, even if the underlying type is 64-bit, and so, if necessary, must be cast to a larger type when calculations are done. Fix a topa_entry->base address calculation by adding a cast. Without the cast, the address was limited to 36-bits i.e. 64GiB. The address calculation is used on systems that do not support Multiple Entry ToPA (only Broadwell), and affects physical addresses on or above 64GiB. Instead of writing to the correct address, the address comprising the first 36 bits would be written to. Intel PT snapshot and sampling modes are not affected. Fixes: 52ca9ced ("perf/x86/intel/pt: Add Intel PT PMU driver") Reported-by:
Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by:
-
Marco Cavenati authored
topa_entry->base needs to store a pfn. It obviously needs to be large enough to store the largest possible x86 pfn which is MAXPHYADDR-PAGE_SIZE (52-12). So it is 4 bits too small. Increase the size of topa_entry->base from 36 bits to 40 bits. Note, systems where physical addresses can be 256TiB or more are affected. [ Adrian: Amend commit message as suggested by Dave Hansen ] Fixes: 52ca9ced ("perf/x86/intel/pt: Add Intel PT PMU driver") Signed-off-by:
Marco Cavenati <cavenati.marco@gmail.com> Signed-off-by:
-
- 29 Jun, 2024 1 commit
-
-
Andrew Cooper authored
The outer if () should have been dropped when switching to c->x86_vfm. Fixes: 6568fc18 ("x86/cpu/intel: Switch to new Intel CPU model defines") Signed-off-by:
Andrew Cooper <andrew.cooper3@citrix.com> Signed-off-by:
Borislav Petkov (AMD) <bp@alien8.de> Acked-by:
Tony Luck <tony.luck@intel.com> Link: https://lore.kernel.org/r/20240529183605.17520-1-andrew.cooper3@citrix.com
-
- 20 Jun, 2024 1 commit
-
-
Borislav Petkov (AMD) authored
I'm getting tired of telling people to put a magic "" in the #define X86_FEATURE /* "" ... */ comment to hide the new feature flag from the user-visible /proc/cpuinfo. Flip the logic to make it explicit: an explicit "<name>" in the comment adds the flag to /proc/cpuinfo and otherwise not, by default. Add the "<name>" of all the existing flags to keep backwards compatibility with userspace. There should be no functional changes resulting from this. Acked-by:
-
- 17 Jun, 2024 8 commits
-
-
Kan Liang authored
Unknown uncore PMON types can be found in both SPR and EMR with HBM or CXL. $ls /sys/devices/ | grep type uncore_type_12_16 uncore_type_12_18 uncore_type_12_2 uncore_type_12_4 uncore_type_12_6 uncore_type_12_8 uncore_type_13_17 uncore_type_13_19 uncore_type_13_3 uncore_type_13_5 uncore_type_13_7 uncore_type_13_9 The unknown PMON types are HBM and CXL PMON. Except for the name, the other information regarding the HBM and CXL PMON counters can be retrieved via the discovery table. Add them into the uncores tables for SPR and EMR. The event config registers for all CXL related units are 8-byte apart. Add SPR_UNCORE_MMIO_OFFS8_COMMON_FORMAT to specially handle it. Signed-off-by:
Yunying Sun <yunying.sun@intel.com> Link: https://lore.kernel.org/r/20240614134631.1092359-9-kan.liang@linux.intel.com
-
Kan Liang authored
The unit control and ID information are retrieved from the unit control RB tree. No one uses the old structure anymore. Remove them. Signed-off-by:
-
Kan Liang authored
The unit control RB tree has the unit control and unit ID information for all the PCI units. Use them to replace the box_ctls/pci_offsets to get an accurate unit control address for PCI uncore units. The UPI/M3UPI units in the discovery table are ignored. Please see the commit 65248a9a ("perf/x86/uncore: Add a quirk for UPI on SPR"). Manually allocate a unit control RB tree for UPI/M3UPI. Add cleanup_extra_boxes to release such manual allocation. Signed-off-by:
-
Kan Liang authored
The unit control RB tree has the unit control and unit ID information for all the MSR units. Use them to replace the box_ctl and uncore_msr_box_ctl() to get an accurate unit control address for MSR uncore units. Add intel_generic_uncore_assign_hw_event(), which utilizes the accurate unit control address from the unit control RB tree to calculate the config_base and event_base. The unit id related information should be retrieved from the unit control RB tree as well. Signed-off-by:
-
Kan Liang authored
The unit control RB tree has the unit control and unit ID information for all the units. Use it to replace the box_ctls/mmio_offsets to get an accurate unit control address for MMIO uncore units. Signed-off-by:
-
Kan Liang authored
The box_ids only save the unit ID for the first die. If a unit, e.g., a CXL unit, doesn't exist in the first die. The unit ID cannot be retrieved. The unit control RB tree also stores the unit ID information. Retrieve the unit ID from the unit control RB tree Signed-off-by:
-
Kan Liang authored
The cpumask of some uncore units, e.g., CXL uncore units, may be wrong under some configurations. Perf may access an uncore counter of a non-existent uncore unit. The uncore driver assumes that all uncore units are symmetric among dies. A global cpumask is shared among all uncore PMUs. However, some CXL uncore units may only be available on some dies. A per PMU cpumask is introduced to track the CPU mask of this PMU. The driver searches the unit control RB tree to check whether the PMU is available on a given die, and updates the per PMU cpumask accordingly. Signed-off-by:
-
Kan Liang authored
The unit control address of some CXL units may be wrongly calculated under some configuration on a EMR machine. The current implementation only saves the unit control address of the units from the first die, and the first unit of the rest of dies. Perf assumed that the units from the other dies have the same offset as the first die. So the unit control address of the rest of the units can be calculated. However, the assumption is wrong, especially for the CXL units. Introduce an RB tree for each uncore type to save the unit control address and three kinds of ID information (unit ID, PMU ID, and die ID) for all units. The unit ID is a physical ID of a unit. The PMU ID is a logical ID assigned to a unit. The logical IDs start from 0 and must be contiguous. The physical ID and the logical ID are 1:1 mapping. The units with the same physical ID in different dies share the same PMU. The die ID indicates which die a unit belongs to. The RB tree can be searched by two different keys (unit ID or PMU ID + die ID). During the RB tree setup, the unit ID is used as a key to look up the RB tree. The perf can create/assign a proper PMU ID to the unit. Later, after the RB tree is setup, PMU ID + die ID is used as a key to look up the RB tree to fill the cpumask of a PMU. It's used more frequently, so PMU ID + die ID is compared in the unit_less(). The uncore_find_unit() has to be O(N). But the RB tree setup only occurs once during the driver load time. It should be acceptable. Compared with the current implementation, more space is required to save the information of all units. The extra size should be acceptable. For example, on EMR, there are 221 units at most. For a 2-socket machine, the extra space is ~6KB at most. Signed-off-by:
-
- 13 Jun, 2024 1 commit
-
-
Mateusz Guzik authored
The routine is used on syscall exit and on non-AMD CPUs is guaranteed to be empty. It probably does not need to be a function call even on CPUs which do need the mitigation. [ bp: Make sure it is always inlined so that noinstr marking works. ] Signed-off-by:
Mateusz Guzik <mjguzik@gmail.com> Signed-off-by:
-
- 02 Jun, 2024 1 commit
-
-
Jeff Johnson authored
make W=1 C=1 warns: WARNING: modpost: missing MODULE_DESCRIPTION() in arch/x86/kernel/cpu/mce/mce-inject.o Add the missing MODULE_DESCRIPTION(). Signed-off-by:
Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20240530-md-x86-mce-inject-v1-1-2a9dc998f709@quicinc.com
-
- 28 May, 2024 7 commits
-
-
Tony Luck authored
New CPU #defines encode vendor and family as well as model. Signed-off-by:
-
Tony Luck authored
New CPU #defines encode vendor and family as well as model but boot code doesn't have all the infrastructure to use them. Hard code the one CPU model number used here. Signed-off-by:
-
Tony Luck authored
New CPU #defines encode vendor and family as well as model. Update INTEL_CPU_DESC() to work with vendor/family/model. Signed-off-by:
-
Tony Luck authored
New CPU #defines encode vendor and family as well as model. Signed-off-by:
-
Tony Luck authored
New CPU #defines encode vendor and family as well as model. Signed-off-by:
-
Tony Luck authored
New CPU #defines encode vendor and family as well as model. Signed-off-by:
-
Tony Luck authored
New CPU #defines encode vendor and family as well as model. Signed-off-by:
-
