Check that even if bpf_loop() callback simulation does not converge to
a specific state, verification could proceed via "brute force"
simulation of maximal number of callback calls.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231121020701.26440-12-eddyz87@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

In some cases verifier can't infer convergence of the bpf_loop()
iteration. E.g. for the following program:

    static int cb(__u32 idx, struct num_context* ctx)
    {
        ctx->i++;
        return 0;
    }

    SEC("?raw_tp")
    int prog(void *_)
    {
        struct num_context ctx = { .i = 0 };
        __u8 choice_arr[2] = { 0, 1 };

        bpf_loop(2, cb, &ctx, 0);
        return choice_arr[ctx.i];
    }

Each 'cb' simulation would eventually return to 'prog' and reach
'return choice_arr[ctx.i]' statement. At which point ctx.i would be
marked precise, thus forcing verifier to track multitude of separate
states with {.i=0}, {.i=1}, ... at bpf_loop() callback entry.

This commit allows "brute force" handling for such cases by limiting
number of callback body simulations using 'umax' value of the first
bpf_loop() parameter.

For this, extend bpf_func_state with 'callback_depth' field.
Increment this field when callback visiting state is pushed to states
traversal stack. For frame #N it's 'callback_depth' field counts how
many times callback with frame depth N+1 had been executed.
Use bpf_func_state specifically to allow independent tracking of
callback depths when multiple nested bpf_loop() calls are present.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231121020701.26440-11-eddyz87@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

A test case to verify that imprecise scalars widening is applied to
callback entering state, when callback call is simulated repeatedly.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231121020701.26440-10-eddyz87@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Callbacks are similar to open coded iterators, so add imprecise
widening logic for callback body processing. This makes callback based
loops behave identically to open coded iterators, e.g. allowing to
verify programs like below:

  struct ctx { u32 i; };
  int cb(u32 idx, struct ctx* ctx)
  {
          ++ctx->i;
          return 0;
  }
  ...
  struct ctx ctx = { .i = 0 };
  bpf_loop(100, cb, &ctx, 0);
  ...
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231121020701.26440-9-eddyz87@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

A set of test cases to check behavior of callback handling logic,
check if verifier catches the following situations:
- program not safe on second callback iteration;
- program not safe on zero callback iterations;
- infinite loop inside a callback.

Verify that callback logic works for bpf_loop, bpf_for_each_map_elem,
bpf_user_ringbuf_drain, bpf_find_vma.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231121020701.26440-8-eddyz87@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Prior to this patch callbacks were handled as regular function calls,
execution of callback body was modeled exactly once.
This patch updates callbacks handling logic as follows:
- introduces a function push_callback_call() that schedules callback
  body verification in env->head stack;
- updates prepare_func_exit() to reschedule callback body verification
  upon BPF_EXIT;
- as calls to bpf_*_iter_next(), calls to callback invoking functions
  are marked as checkpoints;
- is_state_visited() is updated to stop callback based iteration when
  some identical parent state is found.

Paths with callback function invoked zero times are now verified first,
which leads to necessity to modify some selftests:
- the following negative tests required adding release/unlock/drop
  calls to avoid previously masked unrelated error reports:
  - cb_refs.c:underflow_prog
  - exceptions_fail.c:reject_rbtree_add_throw
  - exceptions_fail.c:reject_with_cp_reference
- the following precision tracking selftests needed change in expected
  log trace:
  - verifier_subprog_precision.c:callback_result_precise
    (note: r0 precision is no longer propagated inside callback and
           I think this is a correct behavior)
  - verifier_subprog_precision.c:parent_callee_saved_reg_precise_with_callback
  - verifier_subprog_precision.c:parent_stack_slot_precise_with_callback
Reported-by: Andrew Werner <awerner32@gmail.com>
Closes: https://lore.kernel.org/bpf/CA+vRuzPChFNXmouzGG+wsy=6eMcfr1mFG0F3g7rbg-sedGKW3w@mail.gmail.com/Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231121020701.26440-7-eddyz87@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Move code for simulated stack frame creation to a separate utility
function. This function would be used in the follow-up change for
callbacks handling.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231121020701.26440-6-eddyz87@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Split check_reg_arg() into two utility functions:
- check_reg_arg() operating on registers from current verifier state;
- __check_reg_arg() operating on a specific set of registers passed as
  a parameter;

The __check_reg_arg() function would be used by a follow-up change for
callbacks handling.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231121020701.26440-5-eddyz87@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

This is a preparatory change. A follow-up patch "bpf: verify callbacks
as if they are called unknown number of times" changes logic for
callbacks handling. While previously callbacks were verified as a
single function call, new scheme takes into account that callbacks
could be executed unknown number of times.

This has dire implications for bpf_loop_bench:

    SEC("fentry/" SYS_PREFIX "sys_getpgid")
    int benchmark(void *ctx)
    {
            for (int i = 0; i < 1000; i++) {
                    bpf_loop(nr_loops, empty_callback, NULL, 0);
                    __sync_add_and_fetch(&hits, nr_loops);
            }
            return 0;
    }

W/o callbacks change verifier sees it as a 1000 calls to
empty_callback(). However, with callbacks change things become
exponential:
- i=0: state exploring empty_callback is scheduled with i=0 (a);
- i=1: state exploring empty_callback is scheduled with i=1;
  ...
- i=999: state exploring empty_callback is scheduled with i=999;
- state (a) is popped from stack;
- i=1: state exploring empty_callback is scheduled with i=1;
  ...

Avoid this issue by rewriting outer loop as bpf_loop().
Unfortunately, this adds a function call to a loop at runtime, which
negatively affects performance:

            throughput               latency
   before:  149.919 ± 0.168 M ops/s, 6.670 ns/op
   after :  137.040 ± 0.187 M ops/s, 7.297 ns/op
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231121020701.26440-4-eddyz87@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

This change prepares strobemeta for update in callbacks verification
logic. To allow bpf_loop() verification converge when multiple
callback iterations are considered:
- track offset inside strobemeta_payload->payload directly as scalar
  value;
- at each iteration make sure that remaining
  strobemeta_payload->payload capacity is sufficient for execution of
  read_{map,str}_var functions;
- make sure that offset is tracked as unbound scalar between
  iterations, otherwise verifier won't be able infer that bpf_loop
  callback reaches identical states.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231121020701.26440-3-eddyz87@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

This change prepares syncookie_{tc,xdp} for update in callbakcs
verification logic. To allow bpf_loop() verification converge when
multiple callback itreations are considered:
- track offset inside TCP payload explicitly, not as a part of the
  pointer;
- make sure that offset does not exceed MAX_PACKET_OFF enforced by
  verifier;
- make sure that offset is tracked as unbound scalar between
  iterations, otherwise verifier won't be able infer that bpf_loop
  callback reaches identical states.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231121020701.26440-2-eddyz87@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Daniel Borkmann says:

====================
This fixes bpf_redirect_peer stats accounting for veth and netkit,
and adds tstats in the first place for the latter. Utilise indirect
call wrapper for bpf_redirect_peer, and improve test coverage of the
latter also for netkit devices. Details in the patches, thanks!

The series was targeted at bpf originally, and is done here as well,
so it can trigger BPF CI. Jakub, if you think directly going via net
is better since the majority of the diff touches net anyway, that is
fine, too.

Thanks!

v2 -> v3:
  - Add kdoc for pcpu_stat_type (Simon)
  - Reject invalid type value in netdev_do_alloc_pcpu_stats (Simon)
  - Add Reviewed-by tags from list
v1 -> v2:
  - Move stats allocation/freeing into net core (Jakub)
  - As prepwork for the above, move vrf's dstats over into the core
  - Add a check into stats alloc to enforce tstats upon
    implementing ndo_get_peer_dev
  - Add Acked-by tags from list

Daniel Borkmann (6):
  net, vrf: Move dstats structure to core
  net: Move {l,t,d}stats allocation to core and convert veth & vrf
  netkit: Add tstats per-CPU traffic counters
  bpf, netkit: Add indirect call wrapper for fetching peer dev
  selftests/bpf: De-veth-ize the tc_redirect test case
  selftests/bpf: Add netkit to tc_redirect selftest
====================
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>

Extend the existing tc_redirect selftest to also cover netkit devices
for exercising the bpf_redirect_peer() code paths, so that we have both
veth as well as netkit covered, all tests still pass after this change.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20231114004220.6495-9-daniel@iogearbox.netSigned-off-by: Martin KaFai Lau <martin.lau@kernel.org>

No functional changes to the test case, but just renaming various functions,
variables, etc, to remove veth part of their name for making it more generic
and reusable later on (e.g. for netkit).
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20231114004220.6495-8-daniel@iogearbox.netSigned-off-by: Martin KaFai Lau <martin.lau@kernel.org>

ndo_get_peer_dev is used in tcx BPF fast path, therefore make use of
indirect call wrapper and therefore optimize the bpf_redirect_peer()
internal handling a bit. Add a small skb_get_peer_dev() wrapper which
utilizes the INDIRECT_CALL_1() macro instead of open coding.

Future work could potentially add a peer pointer directly into struct
net_device in future and convert veth and netkit over to use it so
that eventually ndo_get_peer_dev can be removed.
Co-developed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20231114004220.6495-7-daniel@iogearbox.netSigned-off-by: Martin KaFai Lau <martin.lau@kernel.org>

Traffic redirected by bpf_redirect_peer() (used by recent CNIs like Cilium)
is not accounted for in the RX stats of supported devices (that is, veth
and netkit), confusing user space metrics collectors such as cAdvisor [0],
as reported by Youlun.

Fix it by calling dev_sw_netstats_rx_add() in skb_do_redirect(), to update
RX traffic counters. Devices that support ndo_get_peer_dev _must_ use the
@tstats per-CPU counters (instead of @lstats, or @dstats).

To make this more fool-proof, error out when ndo_get_peer_dev is set but
@tstats are not selected.

  [0] Specifically, the "container_network_receive_{byte,packet}s_total"
      counters are affected.

Fixes: 9aa1206e ("bpf: Add redirect_peer helper")
Reported-by: Youlun Zhang <zhangyoulun@bytedance.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Co-developed-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20231114004220.6495-6-daniel@iogearbox.netSigned-off-by: Martin KaFai Lau <martin.lau@kernel.org>

Currently veth devices use the lstats per-CPU traffic counters, which only
cover TX traffic. veth_get_stats64() actually populates RX stats of a veth
device from its peer's TX counters, based on the assumption that a veth
device can _only_ receive packets from its peer, which is no longer true:

For example, recent CNIs (like Cilium) can use the bpf_redirect_peer() BPF
helper to redirect traffic from NIC's tc ingress to veth's tc ingress (in
a different netns), skipping veth's peer device. Unfortunately, this kind
of traffic isn't currently accounted for in veth's RX stats.

In preparation for the fix, use tstats (instead of lstats) to maintain
both RX and TX counters for each veth device. We'll use RX counters for
bpf_redirect_peer() traffic, and keep using TX counters for the usual
"peer-to-peer" traffic. In veth_get_stats64(), calculate RX stats by
_adding_ RX count to peer's TX count, in order to cover both kinds of
traffic.

veth_stats_rx() might need a name change (perhaps to "veth_stats_xdp()")
for less confusion, but let's leave it to another patch to keep the fix
minimal.
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Co-developed-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20231114004220.6495-5-daniel@iogearbox.netSigned-off-by: Martin KaFai Lau <martin.lau@kernel.org>

Add dev->tstats traffic accounting to netkit. The latter contains per-CPU
RX and TX counters.

The dev's TX counters are bumped upon pass/unspec as well as redirect
verdicts, in other words, on everything except for drops.

The dev's RX counters are bumped upon successful __netif_rx(), as well
as from skb_do_redirect() (not part of this commit here).

Using dev->lstats with having just a single packets/bytes counter and
inferring one another's RX counters from the peer dev's lstats is not
possible given skb_do_redirect() can also bump the device's stats.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20231114004220.6495-4-daniel@iogearbox.netSigned-off-by: Martin KaFai Lau <martin.lau@kernel.org>

Move {l,t,d}stats allocation to the core and let netdevs pick the stats
type they need. That way the driver doesn't have to bother with error
handling (allocation failure checking, making sure free happens in the
right spot, etc) - all happening in the core.
Co-developed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Cc: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20231114004220.6495-3-daniel@iogearbox.netSigned-off-by: Martin KaFai Lau <martin.lau@kernel.org>

Just move struct pcpu_dstats out of the vrf into the core, and streamline
the field names slightly, so they better align with the {t,l}stats ones.

No functional change otherwise. A conversion of the u64s to u64_stats_t
could be done at a separate point in future. This move is needed as we are
moving the {t,l,d}stats allocation/freeing to the core.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20231114004220.6495-2-daniel@iogearbox.netSigned-off-by: Martin KaFai Lau <martin.lau@kernel.org>

The netdev subsystem has had a subsystem process document for a while
now. Link it appropriately in MAINTAINERS with the P: tag.

Cc: Jakub Kicinski <kuba@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

David Howells says:

====================
rxrpc: ACK handling fixes

Here are a couple of patches to fix ACK handling in AF_RXRPC:

 (1) Allow RTT determination to use an ACK of any type as the response from
     which to calculate RTT, provided ack.serial matches the serial number
     of the outgoing packet.

 (2) Defer the response to a PING ACK packet (or any ACK with the
     REQUEST_ACK flag set) until after we've parsed the packet so that we
     carry up to date information if the Tx or Rx rings are advanced.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Defer the generation of a PING RESPONSE ACK in response to a PING ACK until
we've parsed the PING ACK so that we pick up any changes to the packet
queue so that we can update ackinfo.

This is also applied to an ACK generated in response to an ACK with the
REQUEST_ACK flag set.

Note that whilst the problem was added in commit 248f219c, it didn't
really matter at that point because the ACK was proposed in softirq mode
and generated asynchronously later in process context, taking the latest
values at the time.  But this fix is only needed since the move to parse
incoming packets in an I/O thread rather than in softirq and generate the
ACK at point of proposal (b0346843).

Fixes: 248f219c ("rxrpc: Rewrite the data and ack handling code")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix RTT determination to be able to use any type of ACK as the response
from which RTT can be calculated provided its ack.serial is non-zero and
matches the serial number of an outgoing DATA or ACK packet.  This
shouldn't be limited to REQUESTED-type ACKs as these can have other types
substituted for them for things like duplicate or out-of-order packets.

Fixes: 4700c4d8 ("rxrpc: Fix loss of RTT samples due to interposed ACK")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>

The blamed commit below introduced a typo causing 'gretap' test-case
failures:

./rtnetlink.sh  -t kci_test_gretap -v
COMMAND: ip link add name test-dummy0 type dummy
COMMAND: ip link set test-dummy0 up
COMMAND: ip netns add testns
COMMAND: ip link help gretap 2>&1 | grep -q '^Usage:'
COMMAND: ip -netns testns link add dev gretap00 type gretap seq key 102 local 172.16.1.100 remote 172.16.1.200
COMMAND: ip -netns testns addr add dev gretap00 10.1.1.100/24
COMMAND: ip -netns testns link set dev gretap00 ups
    Error: either "dev" is duplicate, or "ups" is a garbage.
COMMAND: ip -netns testns link del gretap00
COMMAND: ip -netns testns link add dev gretap00 type gretap external
COMMAND: ip -netns testns link del gretap00
FAIL: gretap

Fix it by using the correct keyword.

Fixes: 9c2a19f7 ("kselftest: rtnetlink.sh: add verbose flag")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since commit a72178cf ("net/smc: Fix dependency of SMC on ISM")
you can build the ism code without selecting the SMC network protocol.
That leaves some ism functions be reported as unused. Move these
functions under the conditional compile with CONFIG_SMC.

Also codify the suggestion to also configure the SMC protocol in ism's
Kconfig - but with an "imply" rather than a "select" as SMC depends on
other config options and allow for a deliberate decision not to build
SMC. Also, mention that in ISM's help.

Fixes: a72178cf ("net/smc: Fix dependency of SMC on ISM")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Closes: https://lore.kernel.org/netdev/afd142a2-1fa0-46b9-8b2d-7652d41d3ab8@infradead.org/Signed-off-by: Gerd Bayer <gbayer@linux.ibm.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix some superficial issues with the tracing of rxrpc_bundle structs,
including:

 (1) Set the debug_id when the bundle is allocated rather than when it is
     set up so that the "NEW" trace line displays the correct bundle ID.

 (2) Show the refcount when emitting the "FREE" traceline.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>

Only present the DWMAC_LOONGSON option on architectures where it can
actually be used.

This follows the same logic as the DWMAC_INTEL option.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Keguang Zhang <keguang.zhang@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

If a device sends a packet that is inbetween 0
and sizeof(u64) the value passed to skb_trim()
as length will wrap around ending up as some very
large value.

The driver will then proceed to parse the header
located at that position, which will either oops or
process some random value.

The fix is to check against sizeof(u64) rather than
0, which the driver currently does. The issue exists
since the introduction of the driver.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull networking fixes from Paolo Abeni:
 "Including fixes from BPF and netfilter.

  Current release - regressions:

   - core: fix undefined behavior in netdev name allocation

   - bpf: do not allocate percpu memory at init stage

   - netfilter: nf_tables: split async and sync catchall in two
     functions

   - mptcp: fix possible NULL pointer dereference on close

  Current release - new code bugs:

   - eth: ice: dpll: fix initial lock status of dpll

  Previous releases - regressions:

   - bpf: fix precision backtracking instruction iteration

   - af_unix: fix use-after-free in unix_stream_read_actor()

   - tipc: fix kernel-infoleak due to uninitialized TLV value

   - eth: bonding: stop the device in bond_setup_by_slave()

   - eth: mlx5:
      - fix double free of encap_header
      - avoid referencing skb after free-ing in drop path

   - eth: hns3: fix VF reset

   - eth: mvneta: fix calls to page_pool_get_stats

  Previous releases - always broken:

   - core: set SOCK_RCU_FREE before inserting socket into hashtable

   - bpf: fix control-flow graph checking in privileged mode

   - eth: ppp: limit MRU to 64K

   - eth: stmmac: avoid rx queue overrun

   - eth: icssg-prueth: fix error cleanup on failing initialization

   - eth: hns3: fix out-of-bounds access may occur when coalesce info is
     read via debugfs

   - eth: cortina: handle large frames

  Misc:

   - selftests: gso: support CONFIG_MAX_SKB_FRAGS up to 45"

* tag 'net-6.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (78 commits)
  macvlan: Don't propagate promisc change to lower dev in passthru
  net: sched: do not offload flows with a helper in act_ct
  net/mlx5e: Check return value of snprintf writing to fw_version buffer for representors
  net/mlx5e: Check return value of snprintf writing to fw_version buffer
  net/mlx5e: Reduce the size of icosq_str
  net/mlx5: Increase size of irq name buffer
  net/mlx5e: Update doorbell for port timestamping CQ before the software counter
  net/mlx5e: Track xmit submission to PTP WQ after populating metadata map
  net/mlx5e: Avoid referencing skb after free-ing in drop path of mlx5e_sq_xmit_wqe
  net/mlx5e: Don't modify the peer sent-to-vport rules for IPSec offload
  net/mlx5e: Fix pedit endianness
  net/mlx5e: fix double free of encap_header in update funcs
  net/mlx5e: fix double free of encap_header
  net/mlx5: Decouple PHC .adjtime and .adjphase implementations
  net/mlx5: DR, Allow old devices to use multi destination FTE
  net/mlx5: Free used cpus mask when an IRQ is released
  Revert "net/mlx5: DR, Supporting inline WQE when possible"
  bpf: Do not allocate percpu memory at init stage
  net: Fix undefined behavior in netdev name allocation
  dt-bindings: net: ethernet-controller: Fix formatting error
  ...

Pull xen updates from Juergen Gross:

 - A fix in the Xen events driver avoiding the use of RCU after
   the call to rcu_report_dead() when taking a cpu down

 - A fix for running as Xen dom0 to line up ACPI's idea of power
   management capabilities with the one of Xen

 - A cleanup eliminating several kernel-doc warnings in Xen related
   code

 - A cleanup series of the Xen events driver

* tag 'for-linus-6.7a-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/events: remove some info_for_irq() calls in pirq handling
  xen/events: modify internal [un]bind interfaces
  xen/events: drop xen_allocate_irqs_dynamic()
  xen/events: remove some simple helpers from events_base.c
  xen/events: reduce externally visible helper functions
  xen/events: remove unused functions
  xen/events: fix delayed eoi list handling
  xen/shbuf: eliminate 17 kernel-doc warnings
  acpi/processor: sanitize _OSC/_PDC capabilities for Xen dom0
  xen/events: avoid using info_for_irq() in xen_send_IPI_one()

Pull virtio fixes from Michael Tsirkin:
 "Bugfixes all over the place"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  vhost-vdpa: fix use after free in vhost_vdpa_probe()
  virtio_pci: Switch away from deprecated irq_set_affinity_hint
  riscv, qemu_fw_cfg: Add support for RISC-V architecture
  vdpa_sim_blk: allocate the buffer zeroed
  virtio_pci: move structure to a header

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

1) Remove unused variable causing compilation warning in nft_set_rbtree,
   from Yang Li. This unused variable is a left over from previous
   merge window.

2) Possible return of uninitialized in nf_conntrack_bridge, from
   Linkui Xiao. This is there since nf_conntrack_bridge is available.

3) Fix incorrect pointer math in nft_byteorder, from Dan Carpenter.
   Problem has been there since 2016.

4) Fix bogus error in destroy set element command. Problem is there
   since this new destroy command was added.

5) Fix race condition in ipset between swap and destroy commands and
   add/del/test control plane. This problem is there since ipset was
   merged.

6) Split async and sync catchall GC in two function to fix unsafe
   iteration over RCU. This is a fix-for-fix that was included in
   the previous pull request.

* tag 'nf-23-11-15' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  netfilter: nf_tables: split async and sync catchall in two functions
  netfilter: ipset: fix race condition between swap/destroy and kernel side add/del/test
  netfilter: nf_tables: bogus ENOENT when destroying element which does not exist
  netfilter: nf_tables: fix pointer math issue in nft_byteorder_eval()
  netfilter: nf_conntrack_bridge: initialize err to 0
  netfilter: nft_set_rbtree: Remove unused variable nft_net
====================

Link: https://lore.kernel.org/r/20231115184514.8965-1-pablo@netfilter.orgSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Macvlan device in passthru mode sets its lower device promiscuous mode
according to its MACVLAN_FLAG_NOPROMISC flag instead of synchronizing it to
its own promiscuity setting. However, macvlan_change_rx_flags() function
doesn't check the mode before propagating such changes to the lower device
which can cause net_device->promiscuity counter overflow as illustrated by
reproduction example [0] and resulting dmesg log [1]. Fix the issue by
first verifying the mode in macvlan_change_rx_flags() function before
propagating promiscuous mode change to the lower device.

[0]:
ip link add macvlan1 link enp8s0f0 type macvlan mode passthru
ip link set macvlan1 promisc on
ip l set dev macvlan1 up
ip link set macvlan1 promisc off
ip l set dev macvlan1 down
ip l set dev macvlan1 up

[1]:
[ 5156.281724] macvlan1: entered promiscuous mode
[ 5156.285467] mlx5_core 0000:08:00.0 enp8s0f0: entered promiscuous mode
[ 5156.287639] macvlan1: left promiscuous mode
[ 5156.288339] mlx5_core 0000:08:00.0 enp8s0f0: left promiscuous mode
[ 5156.290907] mlx5_core 0000:08:00.0 enp8s0f0: entered promiscuous mode
[ 5156.317197] mlx5_core 0000:08:00.0 enp8s0f0: promiscuity touches roof, set promiscuity failed. promiscuity feature of device might be broken.

Fixes: efdbd2b3 ("macvlan: Propagate promiscuity setting to lower devices.")
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20231114175915.1649154-1-vladbu@nvidia.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

There is no hardware supporting ct helper offload. However, prior to this
patch, a flower filter with a helper in the ct action can be successfully
set into the HW, for example (eth1 is a bnxt NIC):

  # tc qdisc add dev eth1 ingress_block 22 ingress
  # tc filter add block 22 proto ip flower skip_sw ip_proto tcp \
    dst_port 21 ct_state -trk action ct helper ipv4-tcp-ftp
  # tc filter show dev eth1 ingress

    filter block 22 protocol ip pref 49152 flower chain 0 handle 0x1
      eth_type ipv4
      ip_proto tcp
      dst_port 21
      ct_state -trk
      skip_sw
      in_hw in_hw_count 1   <----
        action order 1: ct zone 0 helper ipv4-tcp-ftp pipe
         index 2 ref 1 bind 1
        used_hw_stats delayed

This might cause the flower filter not to work as expected in the HW.

This patch avoids this problem by simply returning -EOPNOTSUPP in
tcf_ct_offload_act_setup() to not allow to offload flows with a helper
in act_ct.

Fixes: a21b06e7 ("net: sched: add helper support in act_ct")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/f8685ec7702c4a448a1371a8b34b43217b583b9d.1699898008.git.lucien.xin@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Saeed Mahameed says:

====================
This series provides bug fixes to mlx5 driver.
====================

Link: https://lore.kernel.org/r/20231114215846.5902-1-saeed@kernel.org/Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Treat the operation as an error case when the return value is equivalent to
the size of the name buffer. Failed to write null terminator to the name
buffer, making the string malformed and should not be used. Provide a
string with only the firmware version when forming the string with the
board id fails. This logic for representors is identical to normal flow
with ethtool.

Without check, will trigger -Wformat-truncation with W=1.

    drivers/net/ethernet/mellanox/mlx5/core/en_rep.c: In function 'mlx5e_rep_get_drvinfo':
    drivers/net/ethernet/mellanox/mlx5/core/en_rep.c:78:31: warning: '%.16s' directive output may be truncated writing up to 16 bytes into a region of size between 13 and 22 [-Wformat-truncation=]
      78 |                  "%d.%d.%04d (%.16s)",
         |                               ^~~~~
    drivers/net/ethernet/mellanox/mlx5/core/en_rep.c:77:9: note: 'snprintf' output between 12 and 37 bytes into a destination of size 32
      77 |         snprintf(drvinfo->fw_version, sizeof(drvinfo->fw_version),
         |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      78 |                  "%d.%d.%04d (%.16s)",
         |                  ~~~~~~~~~~~~~~~~~~~~~
      79 |                  fw_rev_maj(mdev), fw_rev_min(mdev),
         |                  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      80 |                  fw_rev_sub(mdev), mdev->board_id);
         |                  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Fixes: cf83c8fd ("net/mlx5e: Add missing ethtool driver info for representors")
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=6d4ab2e97dcfbcd748ae71761a9d8e5e41cc732cSigned-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-16-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Treat the operation as an error case when the return value is equivalent to
the size of the name buffer. Failed to write null terminator to the name
buffer, making the string malformed and should not be used. Provide a
string with only the firmware version when forming the string with the
board id fails.

Without check, will trigger -Wformat-truncation with W=1.

    drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c: In function 'mlx5e_ethtool_get_drvinfo':
    drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c:49:31: warning: '%.16s' directive output may be truncated writing up to 16 bytes into a region of size between 13 and 22 [-Wformat-truncation=]
      49 |                  "%d.%d.%04d (%.16s)",
         |                               ^~~~~
    drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c:48:9: note: 'snprintf' output between 12 and 37 bytes into a destination of size 32
      48 |         snprintf(drvinfo->fw_version, sizeof(drvinfo->fw_version),
         |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      49 |                  "%d.%d.%04d (%.16s)",
         |                  ~~~~~~~~~~~~~~~~~~~~~
      50 |                  fw_rev_maj(mdev), fw_rev_min(mdev), fw_rev_sub(mdev),
         |                  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      51 |                  mdev->board_id);
         |                  ~~~~~~~~~~~~~~~

Fixes: 84e11edb ("net/mlx5e: Show board id in ethtool driver information")
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=6d4ab2e97dcfbcd748ae71761a9d8e5e41cc732cSigned-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

icosq_str size is unnecessarily too long, and it causes a build warning
-Wformat-truncation with W=1. Looking closely, It doesn't need to be 255B,
hence this patch reduces the size to 32B which should be more than enough
to host the string: "ICOSQ: 0x%x, ".

While here, add a missing space in the formatted string.

This fixes the following build warning:

$ KCFLAGS='-Wall -Werror'
$ make O=/tmp/kbuild/linux W=1 -s -j12 drivers/net/ethernet/mellanox/mlx5/core/

drivers/net/ethernet/mellanox/mlx5/core/en/reporter_rx.c: In function 'mlx5e_reporter_rx_timeout':
drivers/net/ethernet/mellanox/mlx5/core/en/reporter_rx.c:718:56:
error: ', CQ: 0x' directive output may be truncated writing 8 bytes into a region of size between 0 and 255 [-Werror=format-truncation=]
  718 |                  "RX timeout on channel: %d, %sRQ: 0x%x, CQ: 0x%x",
      |                                                        ^~~~~~~~
drivers/net/ethernet/mellanox/mlx5/core/en/reporter_rx.c:717:9: note: 'snprintf' output between 43 and 322 bytes into a destination of size 288
  717 |         snprintf(err_str, sizeof(err_str),
      |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  718 |                  "RX timeout on channel: %d, %sRQ: 0x%x, CQ: 0x%x",
      |                  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  719 |                  rq->ix, icosq_str, rq->rqn, rq->cq.mcq.cqn);
      |                  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Fixes: 521f31af ("net/mlx5e: Allow RQ outside of channel context")
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=6d4ab2e97dcfbcd748ae71761a9d8e5e41cc732cSigned-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-14-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Without increased buffer size, will trigger -Wformat-truncation with W=1
for the snprintf operation writing to the buffer.

    drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c: In function 'mlx5_irq_alloc':
    drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c:296:7: error: '@pci:' directive output may be truncated writing 5 bytes into a region of size between 1 and 32 [-Werror=format-truncation=]
      296 |    "%s@pci:%s", name, pci_name(dev->pdev));
          |       ^~~~~
    drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c:295:2: note: 'snprintf' output 6 or more bytes (assuming 37) into a destination of size 32
      295 |  snprintf(irq->name, MLX5_MAX_IRQ_NAME,
          |  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      296 |    "%s@pci:%s", name, pci_name(dev->pdev));
          |    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Fixes: ada9f5d0 ("IB/mlx5: Fix eq names to display nicely in /proc/interrupts")
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=6d4ab2e97dcfbcd748ae71761a9d8e5e41cc732cSigned-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-13-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>