1. 27 Jul, 2017 25 commits
    • Alexander Sverdlin's avatar
      ARM: edb93xx: Add ADC platform device · 57f3b7c7
      Alexander Sverdlin authored
      This enables the creation of ADC platform device on EDB93xx series of Cirrus
      Logic evaluation boards. The driver for this device must be enabled separately,
      either as built-in, or a module.
      Signed-off-by: default avatarAlexander Sverdlin <alexander.sverdlin@gmail.com>
      57f3b7c7
    • Alexander Sverdlin's avatar
      ARM: ep93xx: Add ADC platform device support to core · 5364c647
      Alexander Sverdlin authored
      Newly provided ep93xx_register_adc() could be used by machine-specific code
      to create ADC platform device on Cirrus Logic EP93xx SoC-based machines.
      Signed-off-by: default avatarAlexander Sverdlin <alexander.sverdlin@gmail.com>
      5364c647
    • Alexander Sverdlin's avatar
      ARM: ep93xx: Add ADC clock · f2322451
      Alexander Sverdlin authored
      ADC and keypad controller clocks share the same control register, so use the
      existing infrastructure to add ADC clock support for Cirrus Logic EP93xx SoCs.
      Signed-off-by: default avatarAlexander Sverdlin <alexander.sverdlin@gmail.com>
      f2322451
    • Arnd Bergmann's avatar
      ARM: pxa: select both FB and FB_W100 for eseries · 1d20d8a9
      Arnd Bergmann authored
      We get a link error trying to access the w100fb_gpio_read/write
      functions from the platform when the driver is a loadable module
      or not built-in, so the platform already uses 'select' to hard-enable
      the driver.
      
      However, that fails if the framebuffer subsystem is disabled
      altogether.
      
      I've considered various ways to fix this properly, but they
      all seem like too much work or too risky, so this simply
      adds another 'select' to force the subsystem on as well.
      
      Fixes: 82427de2 ("ARM: pxa: PXA_ESERIES depends on FB_W100.")
      Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      1d20d8a9
    • Arnd Bergmann's avatar
      ARM: ixp4xx: fix ioport_unmap definition · c4caa8db
      Arnd Bergmann authored
      An empty macro definition can cause unexpected behavior, in
      case of the ixp4xx ioport_unmap, we get two warnings:
      
      drivers/net/wireless/marvell/libertas/if_cs.c: In function 'if_cs_release':
      drivers/net/wireless/marvell/libertas/if_cs.c:826:3: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body]
         ioport_unmap(card->iobase);
      drivers/vfio/pci/vfio_pci_rdwr.c: In function 'vfio_pci_vga_rw':
      drivers/vfio/pci/vfio_pci_rdwr.c:230:15: error: the omitted middle operand in ?: will always be 'true', suggest explicit middle operand [-Werror=parentheses]
         is_ioport ? ioport_unmap(iomem) : iounmap(iomem);
      
      This uses an inline function to define the macro in a safer way.
      Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      Acked-by: default avatarKrzysztof Halasa <khalasa@piap.pl>
      c4caa8db
    • Arnd Bergmann's avatar
      ARM: ep93xx: use ARM_PATCH_PHYS_VIRT correctly · cd5bad41
      Arnd Bergmann authored
      Just like ARCH_MULTIPLATFORM, we want to use ARM_PATCH_PHYS_VIRT
      when possible, but that fails for NOMMU or XIP_KERNEL configurations.
      Using 'imply' instead of 'select' gets this right and only uses
      the symbol when we don't have to hardcode the address anyway.
      Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      Acked-by: default avatarAlexander Sverdlin <alexander.sverdlin@gmail.com>
      cd5bad41
    • Arnd Bergmann's avatar
      ARM: mmp: mark usb_dma_mask as __maybe_unused · 1c1953f3
      Arnd Bergmann authored
      This variable may be used by some devices that each have their
      on Kconfig symbol, or by none of them, and that causes a build
      warning:
      
      arch/arm/mach-mmp/devices.c:241:12: error: 'usb_dma_mask' defined but not used [-Werror=unused-variable]
      
      Marking it __maybe_unused avoids the warning.
      Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      1c1953f3
    • Arnd Bergmann's avatar
      ARM: omap2: mark unused functions as __maybe_unused · 293ea3d0
      Arnd Bergmann authored
      The omap_generic_init() and omap_hwmod_init_postsetup() functions are
      used in the initialization for all OMAP2+ SoC types, but in the
      extreme case that those are all disabled, we get a warning about
      unused code:
      
      arch/arm/mach-omap2/io.c:412:123: error: 'omap_hwmod_init_postsetup' defined but not used [-Werror=unused-function]
      arch/arm/mach-omap2/board-generic.c:30:123: error: 'omap_generic_init' defined but not used [-Werror=unused-function]
      
      This annotates both as __maybe_unused to shut up that warning.
      Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      Acked-by: default avatarTony Lindgren <tony@atomide.com>
      Reviewed-by: default avatarSebastian Reichel <sebastian.reichel@collabora.co.uk>
      293ea3d0
    • Arnd Bergmann's avatar
      ARM: omap1: avoid unused variable warning · d1c88887
      Arnd Bergmann authored
      The osk_mistral_init() contains code that is only compiled when
      CONFIG_PM is set, but it uses a variable that is declared outside
      of the #ifdef:
      
      arch/arm/mach-omap1/board-osk.c: In function 'osk_mistral_init':
      arch/arm/mach-omap1/board-osk.c:513:7: warning: unused variable 'ret' [-Wunused-variable]
      
      This removes the #ifdef around the user of the variable,
      make it always used.
      Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      Suggested-by: default avatarTony Lindgren <tony@atomide.com>
      Acked-by: default avatarAaro Koskinen <aaro.koskinen@iki.fi>
      d1c88887
    • Arnd Bergmann's avatar
      ARM: sirf: mark sirfsoc_init_late as __maybe_unused · c1ae3f7c
      Arnd Bergmann authored
      sirfsoc_init_late is called by each of the three individual
      SoC definitions, but in a randconfig build, we can encounter
      a situation where they are all disabled:
      
      arch/arm/mach-prima2/common.c:18:123: warning: 'sirfsoc_init_late' defined but not used [-Wunused-function]
      
      While that is not a useful configuration, the warning also
      doesn't help, so this patch marks the function as __maybe_unused
      to let the compiler know it is there intentionally.
      Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      c1ae3f7c
    • Arnd Bergmann's avatar
      ARM: ixp4xx: use normal prototype for {read,write}s{b,w,l} · 1f3b4d8f
      Arnd Bergmann authored
      ixp4xx defines the arguments to its __indirect_writesb() and other
      functions as pointers to fixed-size data. This is not necessarily
      wrong, and it works most of the time, but it causes warnings in
      at least one driver:
      
      drivers/net/ethernet/smsc/smc91x.c: In function 'smc_rcv':
      drivers/net/ethernet/smsc/smc91x.c:495:21: error: passing argument 2 of '__indirect_readsw' from incompatible pointer type [-Werror=incompatible-pointer-types]
         SMC_PULL_DATA(lp, data, packet_len - 4);
      
      All other definitions of the same functions pass void pointers,
      so doing the same here avoids the warnings.
      Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      Acked-by: default avatarKrzysztof Halasa <khalasa@piap.pl>
      1f3b4d8f
    • Arnd Bergmann's avatar
      ARM: omap1/ams-delta: warn about failed regulator enable · 595a9f9a
      Arnd Bergmann authored
      The modem pm handler in the ams-delta board uses regulator_enable()
      but does not check for a successful return code:
      
      board-ams-delta.c:521:3: error: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Werror=unused-result]
      
      It is not easy to propagate that return code to the callers in
      uart_configure_port/uart_suspend_port/uart_resume_port, unless
      we change all UART drivers, and it is unclear what those would
      do with the return code.
      
      Instead, this patch uses a runtime warning to replace the
      compiletime warning. I have checked that the regulator in question
      is hardcoded to a fixed-voltage GPIO regulator, and that should
      never fail to get enabled if I understand the code right.
      Acked-by: default avatarTony Lindgren <tony@atomide.com>
      Acked-by: default avatarAaro Koskinen <aaro.koskinen@iki.fi>
      Link: https://patchwork.kernel.org/patch/8391981/Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      595a9f9a
    • Arnd Bergmann's avatar
      ARM: rpc: rename RAM_SIZE macro · 47589c4a
      Arnd Bergmann authored
      The RAM_SIZE macro in mach/hardware.h conflicts with macros of
      the same name in multiple drivers, leading to annoying build warnings:
      
      In file included from drivers/net/ethernet/cirrus/cs89x0.c:79:0:
      drivers/net/ethernet/cirrus/cs89x0.h:324:0: error: "RAM_SIZE" redefined [-Werror]
       #define RAM_SIZE 0x1000       /*  The card has 4k bytes or RAM */
       ^
      In file included from /git/arm-soc/arch/arm/mach-rpc/include/mach/io.h:16:0,
                       from /git/arm-soc/arch/arm/include/asm/io.h:194,
                       from /git/arm-soc/include/linux/scatterlist.h:8,
                       from /git/arm-soc/include/linux/dmaengine.h:24,
                       from /git/arm-soc/include/linux/netdevice.h:38,
                       from /git/arm-soc/drivers/net/ethernet/cirrus/cs89x0.c:54:
      arch/arm/mach-rpc/include/mach/hardware.h:28:0: note: this is the location of the previous definition
       #define RAM_SIZE  0x10000000
      
      We don't use RAM_SIZE/RAM_START at all, so we could just remove
      them, but it might be nice to leave them for documentation purposes,
      so this renames them to RPC_RAM_SIZE/RPC_RAM_START in order to
      avoid the build warnings
      Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      47589c4a
    • Arnd Bergmann's avatar
      ARM: w90x900: normalize clk API · bd7fefe1
      Arnd Bergmann authored
      w90x900 still provides its own variant of the clk API rather than using
      the generic COMMON_CLK API. This generally works, but it causes some link
      errors with drivers using the clk_set_rate, clk_get_parent, clk_set_parent
      or clk_round_rate functions when a platform lacks those interfaces.
      
      This adds empty stub implementations for each of them, and I don't even
      try to do something useful here but instead just print a WARN() message
      to make it obvious what is going on if they ever end up being called.
      
      The drivers that call these won't be used on these platforms (otherwise
      we'd get a link error today), so the added code is harmless bloat and
      will warn about accidental use.
      
      A while ago there was a proposal to change w90x900 to use the common-clk
      implementation, which would be the way it should be handled properly.
      Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      bd7fefe1
    • Alexander Sverdlin's avatar
      ARM: ep93xx: normalize clk API · ef8aa4e0
      Alexander Sverdlin authored
      It's a combination of the patch from Arnd Bergmann, which added empty stubs
      for clk_round_rate() and clk_set_parent() and a working trivial
      implementation of clk_get_parent(). The later is required for ADC driver.
      Signed-off-by: default avatarAlexander Sverdlin <alexander.sverdlin@gmail.com>
      Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      ef8aa4e0
    • Arnd Bergmann's avatar
      ARM: sa1100: normalize clk API · 77a374c2
      Arnd Bergmann authored
      sa1100 provides its own variant of the clk API rather than using the
      generic COMMON_CLK API. This generally works, but it causes some link
      errors with drivers using the clk_set_rate, clk_get_parent, clk_set_parent
      or clk_round_rate functions when a platform lacks those interfaces.
      
      This adds trivial stub implementations for each of them, based on
      the behavior of the COMMON_CLK implementation:
      
      - set_rate() and set_parent() report success without doing anything
      - round_rate() returns the clk rate
      - get_parent() returns NULL.
      
      This adds the minimal bloat and should do the right thing for
      the simple clock hardware in this SoC.
      Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      77a374c2
    • Arnd Bergmann's avatar
      ARM: davinci: normalize clk API · 31d5cf14
      Arnd Bergmann authored
      davinci still has its own clk implementation, but lacks
      a clk_get_parent() helper, which can lead to link errors
      in randconfig builds.
      
      This adds the usual implementation.
      Acked-by: default avatarSekhar Nori <nsekhar@ti.com>
      Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      31d5cf14
    • Arnd Bergmann's avatar
      ARM: sa1100/pxa: fix MTD_XIP build · d997211e
      Arnd Bergmann authored
      In commit 3169663a "ARM: sa11x0/pxa: convert OS timer registers
      to IOMEM", the definition of the OSCR macro was changed to be an
      __iomem pointer, but the same register is also used by the XIP
      code. This patch does the corresponding change here as well.
      
      On PXA, the IRQ register definitions were removed even earlier, in
      commit 5d284e35 ("ARM: pxa: avoid accessing interrupt registers
      directly"). This patch unfortunately brings some of that back. An
      earlier version of my patch moved the code into an external function,
      which could not work for CONFIG_XIP_KERNEL+CONFIG_MTD_XIP, so this
      restores something close to the original code.
      
      Link: http://lists.infradead.org/pipermail/linux-arm-kernel/2014-March/241716.htmlAcked-by: default avatarRobert Jarzmik <robert.jarzmik@free.fr>
      Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      d997211e
    • Arnd Bergmann's avatar
      ARM: davinci: don't mark vpif_input structures as 'const' · 8b974017
      Arnd Bergmann authored
      A change to the platform data definitions caused a warning in the board code:
      
      arch/arm/mach-davinci/board-da850-evm.c:1221:13: warning: initialization discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers]
      arch/arm/mach-davinci/board-da850-evm.c:1231:13: warning: initialization discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers]
      
      This is a bit unfortunate, since we generally like structure definitions to
      be const, but as this is legacy code, the easiest way out is still to
      remove the 'const' annotation here.
      
      Fixes: 4a5f8ae5 ("[media] davinci: vpif_capture: get subdevs from DT when available")
      Fixes: 231ce279 ("ARM: davinci: fix const warnings")
      Acked-by: default avatarSekhar Nori <nsekhar@ti.com>
      Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      8b974017
    • Geert Uytterhoeven's avatar
      soc: zte: Restrict SOC_ZTE to ARCH_ZX or COMPILE_TEST · fe89168c
      Geert Uytterhoeven authored
      The ZTE SoC drivers are only useful when building for a ZTE ZX platform.
      
      Fixes: 4c2c2e39 ("soc: zte: pm_domains: Prepare for supporting ARMv8 zx2967 family")
      Signed-off-by: default avatarGeert Uytterhoeven <geert@linux-m68k.org>
      Reviewed-by: default avatarBaoyou Xie <baoyou.xie@linaro.org>
      Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      fe89168c
    • Arnd Bergmann's avatar
      Merge tag 'mvebu-fixes-4.13-1' of git://git.infradead.org/linux-mvebu into fixes · 75f4e381
      Arnd Bergmann authored
      Pull "mvebu fixes for 4.13 (part 1)" from Gregory CLEMENT:
      
      - Fix wrong irq type for gpio expeander on Armada 388 GP
      - Use __pa_symbol instead of virt_to_phys in the mv98dx3236 platform
        SMP code
      
      * tag 'mvebu-fixes-4.13-1' of git://git.infradead.org/linux-mvebu:
        ARM: dts: armada-38x: Fix irq type for pca955
        ARM: mvebu: use __pa_symbol in the mv98dx3236 platform SMP code
      75f4e381
    • Krzysztof Kozlowski's avatar
      ARM: dts: exynos: Add clocks to audss block to fix silent hang on Exynos4412 · a3c0d2fb
      Krzysztof Kozlowski authored
      Add necessary parent clocks for audss (Audio SubSystem, MAUDIO) clock
      controller block.
      
      This allows driver to keep EPLL enabled before accessing any MAUDIO
      registers thus fixing silent hang.  This silent hang appeared with
      commit 6edfa11c ("clk: samsung: Add enable/disable operation for
      PLL36XX clocks"), e.g. on Odroid U3 usually with last (but unrelated)
      messages:
      
      	[    2.382741] input: gpio_keys as /devices/platform/gpio_keys/input/input0
      	[    2.405686] usb 1-3: new high-speed USB device number 3 using exynos-ehci
      	[    2.419843] max77686-rtc max77686-rtc: setting system clock to 2017-06-21 17:04:13 UTC (1498064653)
      Signed-off-by: default avatarKrzysztof Kozlowski <krzk@kernel.org>
      Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      a3c0d2fb
    • Arnd Bergmann's avatar
      Merge tag 'renesas-fixes2-for-v4.13' of... · b2e58cbe
      Arnd Bergmann authored
      Merge tag 'renesas-fixes2-for-v4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes
      
      Pull "Second Round of Renesas ARM Based SoC Fixes for v4.13" from Simon Horman:
      
      Correct order of sound clock frequencies for ULCB boards
      used by r8a7795 and r8a7796 SoCs.
      
      These sounds clock frequencies are used as the ADG clock (output clocks
      for audio module) initial setting and sound codec's initial system clock
      which needs the maximum clock frequency. Thus, descending order is
      required.
      
      * tag 'renesas-fixes2-for-v4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
        arm64: dts: renesas: ulcb: sound clock-frequency needs descending order
      b2e58cbe
    • Arnd Bergmann's avatar
      Merge tag 'omap-for-v4.13/fixes-merge-window' of... · d4e74005
      Arnd Bergmann authored
      Merge tag 'omap-for-v4.13/fixes-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
      
      Pull "Few fixes for omaps for issues found recently" from Tony Lindgren:
      
      - Fix disable_irq related shared IRQ warnings for omap3 PRM
      
      - Fix omap4 legacy code regression that accidentally removed code that
        we still need for PRM interrupts
      
      - Fix dm8168-evm NAND pins and MMC write protect pin direction
      
      - Fix dra71-evm mdio impedance values
      
      * tag 'omap-for-v4.13/fixes-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
        ARM: dts: dra71-evm: mdio: Fix impedance values
        ARM: dts: dm816x: Correct the state of the write protect pin
        ARM: dts: dm816x: Correct NAND support nodes
        ARM: OMAP4: Fix legacy code clean-up regression
        ARM: OMAP2+: Fix omap3 prm shared irq
      d4e74005
    • Arnd Bergmann's avatar
      Merge tag 'renesas-fixes-for-v4.13' of... · 2f9227c7
      Arnd Bergmann authored
      Merge tag 'renesas-fixes-for-v4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes
      
      Pull "Renesas ARM Based SoC Fixes for v4.13" from Simon Horman:
      
      Correct order of sound clock frequencies for Salvator boards
      used by r8a7795 and r8a7796 SoCs.
      
      These sounds clock frequencies are used as the ADG clock (output clocks
      for audio module) initial setting and sound codec's initial system clock
      which needs the maximum clock frequency. Thus, descending order is
      required.
      
      * tag 'renesas-fixes-for-v4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
        arm64: renesas: salvator-common: sound clock-frequency needs descending order
      2f9227c7
  2. 23 Jul, 2017 8 commits
  3. 22 Jul, 2017 6 commits
    • Linus Torvalds's avatar
      Merge tag 'hwmon-for-linus-v4.13-rc2' of... · 4b162c53
      Linus Torvalds authored
      Merge tag 'hwmon-for-linus-v4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
      
      Pull hwmon fix from Guenter Roeck:
       "Avoid buffer overruns in applesmc driver"
      
      * tag 'hwmon-for-linus-v4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
        hwmon: (applesmc) Avoid buffer overruns
      4b162c53
    • Linus Torvalds's avatar
      Merge tag 'tty-4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty · ae75d1ae
      Linus Torvalds authored
      Pull tty/serial fixes from Greg KH:
       "Here are some small tty and serial driver fixes for 4.13-rc2. Nothing
        huge at all, a revert of a patch that turned out to break things, a
        fix up for a new tty ioctl we added in 4.13-rc1 to get the uapi
        definition correct, and a few minor serial driver fixes for reported
        issues.
      
        All of these have been in linux-next for a while with no reported
        issues"
      
      * tag 'tty-4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
        tty: Fix TIOCGPTPEER ioctl definition
        tty: hide unused pty_get_peer function
        tty: serial: lpuart: Fix the logic for detecting the 32-bit type UART
        serial: imx: Prevent TX buffer PIO write when a DMA has been started
        Revert "serial: imx-serial - move DMA buffer configuration to DT"
        serial: sh-sci: Uninitialized variables in sysfs files
        serial: st-asc: Potential error pointer dereference
      ae75d1ae
    • Linus Torvalds's avatar
      Merge tag 'char-misc-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc · dedaff2f
      Linus Torvalds authored
      Pull char/misc driver fixes from Greg KH:
       "Here are some small char and misc driver fixes for 4.13-rc2. All fix
        reported problems with 4.13-rc1 or older kernels (like the binder
        fixes). Full details in the shortlog.
      
        All have been in linux-next with no reported issues"
      
      * tag 'char-misc-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
        w1: omap-hdq: fix error return code in omap_hdq_probe()
        regmap: regmap-w1: Fix build troubles
        w1: Fix slave count on 1-Wire bus (resend)
        mux: mux-core: unregister mux_class in mux_exit()
        mux: remove the Kconfig question for the subsystem
        nvmem: rockchip-efuse: amend compatible rk322x-efuse to rk3228-efuse
        drivers/fsi: fix fsi_slave_mode prototype
        fsi: core: register with postcore_initcall
        thunderbolt: Correct access permissions for active NVM contents
        vmbus: re-enable channel tasklet
        spmi: pmic-arb: Always allocate ppid_to_apid table
        MAINTAINERS: Add entry for SPMI subsystem
        spmi: Include OF based modalias in device uevent
        binder: Use wake up hint for synchronous transactions.
        binder: use group leader instead of open thread
        Revert "android: binder: Sanity check at binder ioctl"
      dedaff2f
    • Linus Torvalds's avatar
      Merge tag 'usb-4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb · 55fd939e
      Linus Torvalds authored
      Pull USB fixes from Greg KH:
       "Here are some small USB fixes for 4.13-rc2.
      
        The usual batch, gadget fixes for reported issues, as well as xhci
        fixes, and a small random collection of other fixes for reported
        issues.
      
        All have been in linux-next with no reported issues"
      
      * tag 'usb-4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (25 commits)
        xhci: fix memleak in xhci_run()
        usb: xhci: fix spinlock recursion for USB2 test mode
        xhci: fix 20000ms port resume timeout
        usb: xhci: Issue stop EP command only when the EP state is running
        xhci: Bad Ethernet performance plugged in ASM1042A host
        xhci: Fix NULL pointer dereference when cleaning up streams for removed host
        usb: renesas_usbhs: gadget: disable all eps when the driver stops
        usb: renesas_usbhs: fix usbhsc_resume() for !USBHSF_RUNTIME_PWCTRL
        usb: gadget: udc: renesas_usb3: protect usb3_ep->started in usb3_start_pipen()
        usb: gadget: udc: renesas_usb3: fix zlp transfer by the dmac
        usb: gadget: udc: renesas_usb3: fix free size in renesas_usb3_dma_free_prd()
        usb: gadget: f_uac2: endianness fixes.
        usb: gadget: f_uac1: endianness fixes.
        include: usb: audio: specify exact endiannes of descriptors
        usb: gadget: udc: start_udc() can be static
        usb: dwc2: gadget: On USB RESET reset device address to zero
        usb: storage: return on error to avoid a null pointer dereference
        usb: typec: include linux/device.h in ucsi.h
        USB: cdc-acm: add device-id for quirky printer
        usb: dwc3: gadget: only unmap requests from DMA if mapped
        ...
      55fd939e
    • Linus Torvalds's avatar
      Merge tag 'staging-4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging · bcb53e57
      Linus Torvalds authored
      Pull staging driver fixes from Greg KH:
       "Here are some small staging driver fixes for reported issues for
        4.13-rc2.
      
        Also in here is a new driver, the virtualbox DRM driver. It's
        stand-alone and got acks from the DRM developers to go in through this
        tree. It's a new thing, but it should be fine for this point in the rc
        cycle due to it being independent.
      
        All of this has been in linux-next for a while with no reported
        issues"
      
      * tag 'staging-4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
        staging: rtl8188eu: add TL-WN722N v2 support
        staging: speakup: safely register and unregister ldisc
        staging: speakup: add functions to register and unregister ldisc
        staging: speakup: safely close tty
        staging: sm750fb: avoid conflicting vesafb
        staging: lustre: ko2iblnd: check copy_from_iter/copy_to_iter return code
        staging: vboxvideo: Add vboxvideo to drivers/staging
        staging: sm750fb: fixed a assignment typo
        staging: rtl8188eu: memory leak in rtw_free_cmd_obj()
        staging: vchiq_arm: fix error codes in probe
        staging: comedi: ni_mio_common: fix AO timer off-by-one regression
      bcb53e57
    • Randy Dunlap's avatar
      MAINTAINERS: fix alphabetical ordering · 82abbea7
      Randy Dunlap authored
      Fix major alphabetic errors.  No attempt to fix items that all begin
      with the same word (like ARM, BROADCOM, DRM, EDAC, FREESCALE, INTEL,
      OMAP, PCI, SAMSUNG, TI, USB, etc.).
      
      (diffstat +/- is different by one line because TI KEYSTONE MULTICORE
      had 2 blank lines after it.)
      Signed-off-by: default avatarRandy Dunlap <rdunlap@infradead.org>
      Acked-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      82abbea7
  4. 21 Jul, 2017 1 commit
    • Linus Torvalds's avatar
      Merge tag 'nfs-for-4.13-2' of git://git.linux-nfs.org/projects/anna/linux-nfs · 505d5c11
      Linus Torvalds authored
      Pull NFS client bugfixes from Anna Schumaker:
       "Stable bugfix:
         - Fix error reporting regression
      
        Bugfixes:
         - Fix setting filelayout ds address race
         - Fix subtle access bug when using ACLs
         - Fix setting mnt3_counts array size
         - Fix a couple of pNFS commit races"
      
      * tag 'nfs-for-4.13-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
        NFS/filelayout: Fix racy setting of fl->dsaddr in filelayout_check_deviceid()
        NFS: Be more careful about mapping file permissions
        NFS: Store the raw NFS access mask in the inode's access cache
        NFSv3: Convert nfs3_proc_access() to use nfs_access_set_mask()
        NFS: Refactor NFS access to kernel access mask calculation
        net/sunrpc/xprt_sock: fix regression in connection error reporting.
        nfs: count correct array for mnt3_counts array size
        Revert commit 722f0b89 ("pNFS: Don't send COMMITs to the DSes if...")
        pNFS/flexfiles: Handle expired layout segments in ff_layout_initiate_commit()
        NFS: Fix another COMMIT race in pNFS
        NFS: Fix a COMMIT race in pNFS
        mount: copy the port field into the cloned nfs_server structure.
        NFS: Don't run wake_up_bit() when nobody is waiting...
        nfs: add export operations
      505d5c11