For some reason, layer-mixer 3 and 4 were missing.  LM3 is used for
writeback on 8x16.
Signed-off-by: Rob Clark <robdclark@gmail.com>

Signed-off-by: Rob Clark <robdclark@gmail.com>

For DSI cmd-mode and writeback, we need to write the CTL's START
register to kick things off, but we only want to do that once both
the encoder and the crtc have a chance to write their corresponding
flush bits.  The difficulty is that when there is a full modeset
(ie. encoder state has changed) we want to defer the start until
encoder->enable().  But if only plane's have changed, we want to do
this from crtc->commit().

The start_mask was a previous attempt to handle this, but it didn't
really do the right thing since atomic conversion.

Instead track in the crtc state that the start should be deferred,
set to try from encoder's (or in future writeback's) atomic_check().
This way the state is part of the atomic state, and rollback can
work properly if an atomic test fails.
Signed-off-by: Rob Clark <robdclark@gmail.com>

Interrupt commands causes the CP to trigger an interrupt as the command
is processed, regardless of the GPU being done processing previous
commands. This is seen by the interrupt being delivered before the
fence is written on 8974 and is likely the cause of the additional
CP_WAIT_FOR_IDLE workaround found for a306, which would cause the CP to
wait for the GPU to go idle before triggering the interrupt.

Instead we can set the (undocumented) BIT(31) of the CACHE_FLUSH_TS
which will cause a special CACHE_FLUSH_TS interrupt to be triggered from
the GPU as the write event is processed.

Add CACHE_FLUSH_TS to the IRQ masks of A3xx and A4xx and remove the
workaround for A306.
Suggested-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

This should be using drm_gem_object_put().  Also since this is done only
in driver unload path, we don't need to synchronize setting tx_gem_obj
to NULL, so juse use the _unlocked() variant.
Signed-off-by: Rob Clark <robdclark@gmail.com>

Remnants of pre-dma_fence fencing which got left behind by mistake.
Signed-off-by: Rob Clark <robdclark@gmail.com>

Since new display controller is called "dpu" instead of "mdp".  Lets
make the name of the toplevel directory for the display controllers a
bit more generic.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>

_dev_ is being dereferenced before it is null checked, hence there
is a potential null pointer dereference.

Fix this by moving the pointer dereference after _dev_ has been
null checked.

Fixes: d4e7f38d70ef ("drm/msm/dsi: check msm_dsi and dsi pointers before use")
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>

_minor_ is being dereferenced before it is null checked, hence there
is a potential null pointer dereference. Fix this by moving the pointer
dereference after _minor_ has been null checked.

Fixes: 024ad8df763f ("drm/msm: add a5xx specific debugfs")
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>

Newer DSI host controllers (SDM845 in particular) require a new clock
called byte_intf_clk. A recent patch tried to add this as an optional
clock, but it still set 'ret' to an error number if it didn't find it.
This breaks the host's probe for all previous DSI host versions.

Instead of setting this up as an optional clock, try to get the clock
only for the DSI version that supports it.

Fixes: 56558fb ("drm/msm/dsi: Add byte_intf_clk")
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

Move a5xx specific code to load firmware into a buffer object to
the generic Adreno code. This will come in useful for future targets.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

The number and type of firmware files required differs for each
target. Instead of using a fixed struct member for each possible
firmware file use a generic list of files that should be loaded
on boot.  Use some semi-target specific enums to help each target
find the appropriate firmware(s) that it needs to load.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

The power management device on the a5xx cores is known as the
GPMU (Graphics Power Management Unit). On a6xx cores the device
was expanded and renamed as the GMU (Graphics Management Unit).
Rename the 'gpmufw' name struct adreno_info as 'powerfw' to
avoid confusion.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm_mm_init() takes the start and length of the intended virtual
memory address region but the msm code is passing the end of
the region instead. That would work out if the region started
at 0 but it doesn't so the top of the region sneaks above the
32 bit boundary which won't work because the driver doesn't
support 64 bit addresses for the GPU yet.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

If we fail to allocate gpu->grp_clks reset the number of available
clocks to zero to avoid referencing the missing array later.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm_gem_object_{reference,unreference,unreference_unlocked} are
deprecated functions, and merely alias to the get/put functions.
Switch to the new names.
Signed-off-by: Steve Kowalik <steven@wedontsleep.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

 Remove unneeded semicolon.

Generated by: scripts/coccinelle/misc/semicolon.cocci

CC: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Rob Clark <robdclark@gmail.com>

The trailing semicolon is an empty statement that does no operation.
Removing it since it doesn't do anything.
Signed-off-by: Luis de Bethencourt <luisbg@kernel.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

SDM845 uses a newer revision (v2.0+) of the 6G DSI controller. This
revision has another clock input at the block boundary called the byte
interface clock. Specify this new clock in the binding.

A 10nm DSI PHY is used along with the controller. Add a compatible
string for it and specify its base address/regulator supply needs.

Cc: Rob Herring <robh@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

Add the compatible string for 14nm DSI PHY (used in MSM8996/APQ8096).
>From 14nm PHY onwards, the "dsi_phy_regulator" reg-name is not required,
but "dsi_phy_lane" reg-name is. Update the doc to specify the reg-names
each PHY revision needs.

Cc: Rob Herring <robh@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

The PHY regulator supply names vary across different PHY versions.
Mention explicitly which PHYs require which supplies.

Cc: Rob Herring <robh@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

"qcom,dsi-host-index" and "qcom,dsi-phy-index" DT props aren't
acceptable and have never been used in any DT files. Remove them.

Cc: Rob Herring <robh@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

DSI6G v2.0+ blocks have a new clock input to them called
byte_intf_clk. It's rate is to be set as byte_clk / 2.

Within the clock controller (CC) subsystem, this clock is a
child/descendant of the byte_clk.

Set it up as an optional clock in the DSI host driver. Make sure
that we enable/set its rate only after we configure byte_clk.
This is required for the ancestor clocks in the CC to be
configured correctly.
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

SDM845 contains 2 DSI6G v2.2.1 host controllers. Add them in dsi_cfg.

Cc: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

We try to get the interface clock in dsi_get_config early during DSI's
component bind. Try getting both the "iface" and "iface_clk" clock name
variants so that we are compatible with both new and legacy DT.
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

Populate the PHY ops with the downstream driver as reference.

There are a couple of TODOs which need to be resolved:
- The PHY timings are all hardcoded for now. This needs to be replaced
  with automatic calculations once we get/understand them.
- There are some lane configuration registers which use a new
  representation between physical and logical lane mappings. For now,
  we've hardcoced them to follow the default mapping (i.e
  logical 0 -> phy 0, logical 1 -> phy 1 etc).
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

Populate PLL clock ops from downstream. This contains the VCO PLL
ops and the registration of standard clk_divider and clk_mux clocks.
Unlike 14nm PLL, the postdividers/mux of the slave PLL doesn't need
to be set to the same values of the postdivs/mux of the master PLL.
Hence, we don't need special postdivider clock ops like we did with
the 14nm PLL driver.

Like the previous PLL drivers, the implementation is slightly different
from downstream. We don't use shadow clocks, but have the ability to
reparent the RCGs to a different source.
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

Add new 10nm DSI PLL/PHY files that will be used on SDM845.

Just populate empty pll/phy funcs for now. These will be filled up
later.
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

This flags cause cmdstream to be executed from the ringbuffer (RB)
instead of IB1.  Normally not something you'd ever want to do, but
it is super useful for firmware debugging.

Hidden behind CAP_SYS_RAWIO and a default=n kconfig option which
depends on EXPERT (and has a suitably scary warning), to prevent
it from being used on accident.
Signed-off-by: Rob Clark <robdclark@gmail.com>

Add some debugfs to dump out PFP and ME microcontroller state, as well
as some of the queues (MEQ and ROQ).  Also add a debugfs file to trigger
a GPU reset (and reloading the firmware on next submit).
Signed-off-by: Rob Clark <robdclark@gmail.com>

Move null checks of pointer arguments to the beginning of the
modeset init function since they are referenced immediately
instead of after they have already been used.
Signed-off-by: Lloyd Atkinson <latkinso@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

Check DSI instance id argument against the proper boundary size
to protect against invalid configuration of the DSI id.
Signed-off-by: Lloyd Atkinson <latkinso@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

Make msm_dsi_pll_init consistently return an error code instead
of NULL when pll initialization fails so that later pll
retrieval can check against an error code. Add checks for these
failures after retrieval of src_pll to avoid invalid pointer
dereferences later in msm_dsi_pll_get_clk_provider.
Signed-off-by: Lloyd Atkinson <latkinso@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

Add HDCP support to i915 drm driver.

* tag 'topic/hdcp-2018-02-13' of git://anongit.freedesktop.org/drm/drm-misc: (26 commits)
  drm/i915: fix misalignment in HDCP register def
  drm/i915: Reauthenticate HDCP on failure
  drm/i915: Detect panel's hdcp capability
  drm/i915: Optimize HDCP key load
  drm/i915: Retry HDCP bksv read
  drm/i915: Connector info in HDCP debug msgs
  drm/i915: Stop encryption for repeater with no sink
  drm/i915: Handle failure from 2nd stage HDCP auth
  drm/i915: Downgrade hdcp logs from INFO to DEBUG_KMS
  drm/i915: Restore HDCP DRM_INFO when with no downstream
  drm/i915: Check for downstream topology errors
  drm/i915: Start repeater auth on READY/CP_IRQ
  drm/i915: II stage HDCP auth for repeater only
  drm/i915: Extending HDCP for HSW, BDW and BXT+
  drm/i915/dp: Fix compilation of intel_dp_hdcp_check_link
  drm/i915: Only disable HDCP when it's active
  drm/i915: Don't allow HDCP on PORT E/F
  drm/i915: Implement HDCP for DisplayPort
  drm/i915: Implement HDCP for HDMI
  drm/i915: Add function to output Aksv over GMBUS
  ...

drm-misc-next for 4.17:

UAPI Changes:
- drm/vc4: Expose performance counters to userspace (Boris)

Cross-subsystem Changes:
- MAINTAINERS: Linus to maintain panel-arm-versatile in -misc (Linus)

Core Changes:
- Only use swiotlb when necessary (Chunming)

Driver Changes:
- drm/panel: Add support for ARM Versatile panels (Linus)
- pl111: Improvements around versatile panel support (Linus)

----------------------------------------
Tagged on 2018-02-06:
drm-misc-next for 4.17:

UAPI Changes:
- Validate mode flags + type (Ville)
- Deprecate unused mode flags PIXMUX, BCAST (Ville)
- Deprecate unused mode types BUILTIN, CRTC_C, CLOCK_C, DEFAULT (Ville)

Cross-subsystem Changes:
- MAINTAINERS: s/Daniel/Maarten/ for drm-misc (Daniel)

Core Changes:
- gem: Export gem functions for drivers to use (Samuel)
- bridge: Introduce bridge timings in drm_bridge (Linus)
- dma-buf: Allow exclusive fence to be bundled in fence array when
	   calling reservation_object_get_fences_rcu (Christian)
- dp: Add training pattern 4 and HBR3 support to dp helpers (Manasi)
- fourcc: Add alpha bit to formats to avoid driver format LUTs (Maxime)
- mode: Various cleanups + add new device-wide .mode_valid hook (Ville)
- atomic: Fix state leak when non-blocking commits fail (Leo)
	  NOTE: IIRC, this was cross-picked to -fixes so it might fall out
- crc: Allow polling on the data fd (Maarten)

Driver Changes:
- bridge/vga-dac: Add THS8134* support (Linus)
- tinydrm: Various MIPI DBI improvements/cleanups (Noralf)
- bridge/dw-mipi-dsi: Cleanups + use create_packet helper (Brian)
- drm/sun4i: Add Display Engine frontend support (Maxime)
- drm/sun4i: Add zpos support + increase num planes from 2 to 4 (Maxime)
- various: Use drm_mode_get_hv_timing() to fill plane clip rectangle (Ville)
- stm: Add 8-bit clut support, add dsi phy v1.31 support, +fixes (Phillipe)

Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Chunming Zhou <david1.zhou@amd.com>
Cc: Samuel Li <Samuel.Li@amd.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Brian Norris <briannorris@chromium.org>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Philippe Cornu <philippe.cornu@st.com>
Cc: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

* tag 'drm-misc-next-2018-02-13' of git://anongit.freedesktop.org/drm/drm-misc: (115 commits)
  drm/radeon: only enable swiotlb path when need v2
  drm/amdgpu: only enable swiotlb alloc when need v2
  drm: add func to get max iomem address v2
  drm/vc4: Expose performance counters to userspace
  drm: Print the pid when debug logging an ioctl error.
  drm/stm: ltdc: remove non-alpha color formats on layer 2 for older hw
  drm/stm: ltdc: add non-alpha color formats
  drm/bridge/synopsys: dsi: Add 1.31 version support
  drm/bridge/synopsys: dsi: Add read feature
  drm/pl111: Support multiple endpoints on the CLCD
  drm/pl111: Support variants with broken VBLANK
  drm/pl111: Support variants with broken clock divider
  drm/pl111: Handle the Versatile RGB/BGR565 mode
  drm/pl111: Properly detect the ARM PL110 variants
  drm/panel: Add support for ARM Versatile panels
  drm/panel: Device tree bindings for ARM Versatile panels
  drm/bridge: Rename argument from crtc to bridge
  drm/crc: Add support for polling on the data fd.
  drm/sun4i: Use drm_mode_get_hv_timing() to populate plane clip rectangle
  drm/rcar-du: Use drm_mode_get_hv_timing() to populate plane clip rectangle
  ...

UAPI Changes:

- Userspace whitelist register GEN9_SLICE_COMMON_ECO_CHICKEN1 for GLK (Kenneth)
- Non-existent PMU counters are not placed to sysfs (Tvrtko)
- Add a note to deprecate I915_SET_COLORKEY_NONE and ignore it (Ville)
	* Intel DDX never ended using it, and implementation was wonky

Core Changes:

- Moved away from struct timeval into ktime_t in prep for 2038 (Arnd)
	* Merged the i915 portion through drm-tip, no core dependencies

Driver Changes:

- Base support for Icelake and Icelake PCH (Anusha, Rodrigo, Mahesh, Paulo, James, Kelvin)
- Add AUX-F port support for Cannonlake (Rodrigo)
- New DMC firmware for 1.07 Cannonlake (Anusha)
	* Go to linux-firmware.git to get it
- Reject non-cursor planes nearly (3 px) out of screen on GLK/CNL (Imre)
- Y/Yf modifiers restored for SKL+ sprites (Ville)
- Compressed framebuffer support for sprites (Ville)
- Tune down overly aggressive shrinking (Chris)
- Shrink kmem caches when GPU is idle (Chris)
- EDID bit-banging fallback for HDMI EDID (Stefan)
- Don't boost the GPU when the waited request is already running (Chris)
- Avoid GLK/BXT CDCLK frequency locking timeouts (Imre)
- Limit DP link rate according to VBT on CNL+ (Jani)
- Skip post-reset request emission if the engine is not idle (Chris)
- Report any link training error on a fixed eDP panel as errors (Manasi)
- DSI panel fixes for Bay Trail (Hans)
- Selftest additions and improvements (Chris, Matt)
- DMA fence test additions and accompanying fixes (Chris)
- Power domain vs. register access fix (Maarten)
- Squelch warnings for people with teensy framebuffers (stride < 512) (Maarten)
- Increase Render/Media power gating hysteresis for Gen9+ (Chris)
- HDMI vswing display workaround for Gen9+ (Ville)
- GuC code cleanup and lockdep fixes (Sagar, Michal Wa.)
- Continuously run hangcheck for simplicity (Chris)
- Execlist debugging improvements (Chris)
- GuC debugging improvements (Sujaritha, Michal Wa., Sagar)
- Command parser boundary checks (Michal Srb)
- Add a workaround for 3DSTATE_SAMPLE_PATTERN on CNL (Rafael)
- Fix PMU enabling race condition (Tvrtko)
- Usual smaller testing and debugging improvements

* tag 'drm-intel-next-2018-02-07' of git://anongit.freedesktop.org/drm/drm-intel: (158 commits)
  drm/i915: Update DRIVER_DATE to 20180207
  drm/i915/pmu: Fix PMU enable vs execlists tasklet race
  drm/i915/cnl: WaPipeControlBefore3DStateSamplePattern
  drm/i915/cmdparser: Do not check past the cmd length.
  drm/i915/cmdparser: Check reg_table_count before derefencing.
  drm/i915: Deprecate I915_SET_COLORKEY_NONE
  drm/i915: Skip post-reset request emission if the engine is not idle
  drm/i915/execlists: Move the reset bits to a more natural home
  drm/i915/selftests: Use a sacrificial context for hang testing
  drm/i915/selftests: Flush old resets between engines
  drm/i915/breadcrumbs: Drop request reference for the signaler thread
  drm/i915: Remove unbannable context spam from reset
  drm/i915/execlists: Remove the startup spam
  drm/i915: Show the GPU state when declaring wedged
  drm/i915: Always update the no_fbc_reason when disabling
  drm/i915: Add some newlines to intel_engine_dump() headers
  drm/i915: Report if an unbannable context is involved in a GPU hang
  drm/i915: Remove spurious DRM_ERROR for cancelled interrupts
  drm/i915/execlists: Flush GTIIR on clearing CS interrupts during reset
  drm/i915: reduce indent in pch detection
  ...

swiotlb expands our card accessing range, but its path always is slower
than ttm pool allocation.
So add condition to use it.
v2: move a bit later
Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180209024410.1469-3-david1.zhou@amd.com

get the max io mapping address of system memory to see if it is over
our card accessing range.
v2: move checking later
Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180209024410.1469-2-david1.zhou@amd.com

it will be used to check if the driver needs swiotlb
v2: Don't use inline, instead, move function to drm_memory.c (Michel Daenzer <michel@daenzer.net>)
Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180209024410.1469-1-david1.zhou@amd.com